1 /* SPDX-License-Identifier: GPL-2.0 */ 1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef __DT_POWER_DELIVERY_H 2 #ifndef __DT_POWER_DELIVERY_H 3 #define __DT_POWER_DELIVERY_H 3 #define __DT_POWER_DELIVERY_H 4 4 5 /* Power delivery Power Data Object definition 5 /* Power delivery Power Data Object definitions */ 6 #define PDO_TYPE_FIXED 0 6 #define PDO_TYPE_FIXED 0 7 #define PDO_TYPE_BATT 1 7 #define PDO_TYPE_BATT 1 8 #define PDO_TYPE_VAR 2 8 #define PDO_TYPE_VAR 2 9 #define PDO_TYPE_APDO 3 9 #define PDO_TYPE_APDO 3 10 10 11 #define PDO_TYPE_SHIFT 30 11 #define PDO_TYPE_SHIFT 30 12 #define PDO_TYPE_MASK 0x3 12 #define PDO_TYPE_MASK 0x3 13 13 14 #define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT 14 #define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) 15 15 16 #define PDO_VOLT_MASK 0x3ff 16 #define PDO_VOLT_MASK 0x3ff 17 #define PDO_CURR_MASK 0x3ff 17 #define PDO_CURR_MASK 0x3ff 18 #define PDO_PWR_MASK 0x3ff 18 #define PDO_PWR_MASK 0x3ff 19 19 20 #define PDO_FIXED_DUAL_ROLE (1 << 29) /* P 20 #define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */ 21 #define PDO_FIXED_SUSPEND (1 << 28) /* U 21 #define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */ 22 #define PDO_FIXED_HIGHER_CAP (1 << 28) /* R 22 #define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */ 23 #define PDO_FIXED_EXTPOWER (1 << 27) /* E 23 #define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */ 24 #define PDO_FIXED_USB_COMM (1 << 26) /* U 24 #define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */ 25 #define PDO_FIXED_DATA_SWAP (1 << 25) /* D 25 #define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */ 26 #define PDO_FIXED_VOLT_SHIFT 10 /* 50m 26 #define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ 27 #define PDO_FIXED_CURR_SHIFT 0 /* 10m 27 #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ 28 28 29 #define PDO_FIXED_VOLT(mv) ((((mv) / 50) 29 #define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) 30 #define PDO_FIXED_CURR(ma) ((((ma) / 10) 30 #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) 31 31 32 #define PDO_FIXED(mv, ma, flags) 32 #define PDO_FIXED(mv, ma, flags) \ 33 (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | 33 (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ 34 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(m 34 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) 35 35 36 #define VSAFE5V 5000 /* mv units */ 36 #define VSAFE5V 5000 /* mv units */ 37 37 38 #define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50m 38 #define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ 39 #define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50m 39 #define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ 40 #define PDO_BATT_MAX_PWR_SHIFT 0 /* 250 40 #define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ 41 41 42 #define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & 42 #define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) 43 #define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & 43 #define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) 44 #define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) 44 #define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) 45 45 46 #define PDO_BATT(min_mv, max_mv, max_mw) 46 #define PDO_BATT(min_mv, max_mv, max_mw) \ 47 (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MI 47 (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ 48 PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_ 48 PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) 49 49 50 #define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50m 50 #define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ 51 #define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50m 51 #define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ 52 #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10m 52 #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ 53 53 54 #define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & P 54 #define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) 55 #define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & P 55 #define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) 56 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & P 56 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) 57 57 58 #define PDO_VAR(min_mv, max_mv, max_ma) 58 #define PDO_VAR(min_mv, max_mv, max_ma) \ 59 (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_ 59 (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ 60 PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MA 60 PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) 61 61 62 #define APDO_TYPE_PPS 0 62 #define APDO_TYPE_PPS 0 63 63 64 #define PDO_APDO_TYPE_SHIFT 28 /* Onl 64 #define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */ 65 #define PDO_APDO_TYPE_MASK 0x3 65 #define PDO_APDO_TYPE_MASK 0x3 66 66 67 #define PDO_APDO_TYPE(t) ((t) << PDO_AP 67 #define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT) 68 68 69 #define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 69 #define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */ 70 #define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 70 #define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */ 71 #define PDO_PPS_APDO_MAX_CURR_SHIFT 0 71 #define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */ 72 72 73 #define PDO_PPS_APDO_VOLT_MASK 0xff 73 #define PDO_PPS_APDO_VOLT_MASK 0xff 74 #define PDO_PPS_APDO_CURR_MASK 0x7f 74 #define PDO_PPS_APDO_CURR_MASK 0x7f 75 75 76 #define PDO_PPS_APDO_MIN_VOLT(mv) \ 76 #define PDO_PPS_APDO_MIN_VOLT(mv) \ 77 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MAS 77 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT) 78 #define PDO_PPS_APDO_MAX_VOLT(mv) \ 78 #define PDO_PPS_APDO_MAX_VOLT(mv) \ 79 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MAS 79 ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT) 80 #define PDO_PPS_APDO_MAX_CURR(ma) \ 80 #define PDO_PPS_APDO_MAX_CURR(ma) \ 81 ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK 81 ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT) 82 82 83 #define PDO_PPS_APDO(min_mv, max_mv, max_ma) 83 #define PDO_PPS_APDO(min_mv, max_mv, max_ma) \ 84 (PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TY 84 (PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) | \ 85 PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_P 85 PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) | \ 86 PDO_PPS_APDO_MAX_CURR(max_ma)) 86 PDO_PPS_APDO_MAX_CURR(max_ma)) 87 87 88 /* !! 88 #endif /* __DT_POWER_DELIVERY_H */ 89 * Based on "Table 6-14 Fixed Supply PDO - Si << 90 * Version 1.2" << 91 * Initial current capability of the new sour << 92 */ << 93 #define FRS_DEFAULT_POWER 1 << 94 #define FRS_5V_1P5A 2 << 95 #define FRS_5V_3A 3 << 96 << 97 /* << 98 * SVDM Identity Header << 99 * -------------------- << 100 * <31> :: data capable as a USB host << 101 * <30> :: data capable as a USB device << 102 * <29:27> :: product type (UFP / Cable / VPD << 103 * <26> :: modal operation supported (1b = << 104 * <25:23> :: product type (DFP) (SVDM versio << 105 * <22:21> :: connector type (SVDM version 2. << 106 * <20:16> :: Reserved, Shall be set to zero << 107 * <15:0> :: USB-IF assigned VID for this ca << 108 */ << 109 << 110 /* PD Rev2.0 definition */ << 111 #define IDH_PTYPE_UNDEF 0 << 112 << 113 /* SOP Product Type (UFP) */ << 114 #define IDH_PTYPE_NOT_UFP 0 << 115 #define IDH_PTYPE_HUB 1 << 116 #define IDH_PTYPE_PERIPH 2 << 117 #define IDH_PTYPE_PSD 3 << 118 #define IDH_PTYPE_AMA 5 << 119 << 120 /* SOP' Product Type (Cable Plug / VPD) */ << 121 #define IDH_PTYPE_NOT_CABLE 0 << 122 #define IDH_PTYPE_PCABLE 3 << 123 #define IDH_PTYPE_ACABLE 4 << 124 #define IDH_PTYPE_VPD 6 << 125 << 126 /* SOP Product Type (DFP) */ << 127 #define IDH_PTYPE_NOT_DFP 0 << 128 #define IDH_PTYPE_DFP_HUB 1 << 129 #define IDH_PTYPE_DFP_HOST 2 << 130 #define IDH_PTYPE_DFP_PB 3 << 131 << 132 #define VDO_IDH(usbh, usbd, ufp_cable, is_moda << 133 ((usbh) << 31 | (usbd) << 30 | ((ufp_c << 134 | (is_modal) << 26 | ((dfp) & 0x7) << << 135 | ((vid) & 0xffff)) << 136 << 137 /* << 138 * Cert Stat VDO << 139 * ------------- << 140 * <31:0> : USB-IF assigned XID for this cabl << 141 */ << 142 #define VDO_CERT(xid) ((xid) & 0xfff << 143 << 144 /* << 145 * Product VDO << 146 * ----------- << 147 * <31:16> : USB Product ID << 148 * <15:0> : USB bcdDevice << 149 */ << 150 #define VDO_PRODUCT(pid, bcd) (((pid) & 0xff << 151 << 152 /* << 153 * UFP VDO (PD Revision 3.0+ only) << 154 * -------- << 155 * <31:29> :: UFP VDO version << 156 * <28> :: Reserved << 157 * <27:24> :: Device capability << 158 * <23:22> :: Connector type (10b == receptacl << 159 * <21:11> :: Reserved << 160 * <10:8> :: Vconn power (AMA only) << 161 * <7> :: Vconn required (AMA only, 0b == << 162 * <6> :: Vbus required (AMA only, 0b == y << 163 * <5:3> :: Alternate modes << 164 * <2:0> :: USB highest speed << 165 */ << 166 /* UFP VDO Version */ << 167 #define UFP_VDO_VER1_2 2 << 168 << 169 /* Device Capability */ << 170 #define DEV_USB2_CAPABLE (1 << 0) << 171 #define DEV_USB2_BILLBOARD (1 << 1) << 172 #define DEV_USB3_CAPABLE (1 << 2) << 173 #define DEV_USB4_CAPABLE (1 << 3) << 174 << 175 /* Connector Type */ << 176 #define UFP_RECEPTACLE 2 << 177 #define UFP_CAPTIVE 3 << 178 << 179 /* Vconn Power (AMA only, set to AMA_VCONN_NOT << 180 #define AMA_VCONN_PWR_1W 0 << 181 #define AMA_VCONN_PWR_1W5 1 << 182 #define AMA_VCONN_PWR_2W 2 << 183 #define AMA_VCONN_PWR_3W 3 << 184 #define AMA_VCONN_PWR_4W 4 << 185 #define AMA_VCONN_PWR_5W 5 << 186 #define AMA_VCONN_PWR_6W 6 << 187 << 188 /* Vconn Required (AMA only) */ << 189 #define AMA_VCONN_NOT_REQ 0 << 190 #define AMA_VCONN_REQ 1 << 191 << 192 /* Vbus Required (AMA only) */ << 193 #define AMA_VBUS_REQ 0 << 194 #define AMA_VBUS_NOT_REQ 1 << 195 << 196 /* Alternate Modes */ << 197 #define UFP_ALTMODE_NOT_SUPP 0 << 198 #define UFP_ALTMODE_TBT3 (1 << 0) << 199 #define UFP_ALTMODE_RECFG (1 << 1) << 200 #define UFP_ALTMODE_NO_RECFG (1 << 2) << 201 << 202 /* USB Highest Speed */ << 203 #define UFP_USB2_ONLY 0 << 204 #define UFP_USB32_GEN1 1 << 205 #define UFP_USB32_4_GEN2 2 << 206 #define UFP_USB4_GEN3 3 << 207 << 208 #define VDO_UFP(ver, cap, conn, vcpwr, vcr, vb << 209 (((ver) & 0x7) << 29 | ((cap) & 0xf) < << 210 | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | << 211 | ((spd) & 0x7)) << 212 << 213 /* << 214 * DFP VDO (PD Revision 3.0+ only) << 215 * -------- << 216 * <31:29> :: DFP VDO version << 217 * <28:27> :: Reserved << 218 * <26:24> :: Host capability << 219 * <23:22> :: Connector type (10b == receptacl << 220 * <21:5> :: Reserved << 221 * <4:0> :: Port number << 222 */ << 223 #define DFP_VDO_VER1_1 1 << 224 #define HOST_USB2_CAPABLE (1 << 0) << 225 #define HOST_USB3_CAPABLE (1 << 1) << 226 #define HOST_USB4_CAPABLE (1 << 2) << 227 #define DFP_RECEPTACLE 2 << 228 #define DFP_CAPTIVE 3 << 229 << 230 #define VDO_DFP(ver, cap, conn, pnum) << 231 (((ver) & 0x7) << 29 | ((cap) & 0x7) < << 232 | ((pnum) & 0x1f)) << 233 << 234 /* << 235 * Cable VDO (for both Passive and Active Cabl << 236 * --------- << 237 * <31:28> :: Cable HW version << 238 * <27:24> :: Cable FW version << 239 * <23:20> :: Reserved, Shall be set to zero << 240 * <19:18> :: type-C to Type-A/B/C/Captive (00 << 241 * <17> :: Reserved, Shall be set to zero << 242 * <16:13> :: cable latency (0001 == <10ns(~1m << 243 * <12:11> :: cable termination type (11b == b << 244 * <10> :: SSTX1 Directionality support (0b << 245 * <9> :: SSTX2 Directionality support << 246 * <8> :: SSRX1 Directionality support << 247 * <7> :: SSRX2 Directionality support << 248 * <6:5> :: Vbus current handling capability << 249 * <4> :: Vbus through cable (0b == no, 1b << 250 * <3> :: SOP" controller present? (0b == << 251 * <2:0> :: USB SS Signaling support << 252 * << 253 * Passive Cable VDO (PD Rev3.0+) << 254 * --------- << 255 * <31:28> :: Cable HW version << 256 * <27:24> :: Cable FW version << 257 * <23:21> :: VDO version << 258 * <20> :: Reserved, Shall be set to zero << 259 * <19:18> :: Type-C to Type-C/Captive (10b == << 260 * <17> :: Reserved, Shall be set to zero << 261 * <16:13> :: cable latency (0001 == <10ns(~1m << 262 * <12:11> :: cable termination type (10b == V << 263 * <10:9> :: Maximum Vbus voltage (00b == 20V << 264 * <8:7> :: Reserved, Shall be set to zero << 265 * <6:5> :: Vbus current handling capability << 266 * <4:3> :: Reserved, Shall be set to zero << 267 * <2:0> :: USB highest speed << 268 * << 269 * Active Cable VDO 1 (PD Rev3.0+) << 270 * --------- << 271 * <31:28> :: Cable HW version << 272 * <27:24> :: Cable FW version << 273 * <23:21> :: VDO version << 274 * <20> :: Reserved, Shall be set to zero << 275 * <19:18> :: Connector type (10b == C, 11b == << 276 * <17> :: Reserved, Shall be set to zero << 277 * <16:13> :: cable latency (0001 == <10ns(~1m << 278 * <12:11> :: cable termination type (10b == o << 279 * <10:9> :: Maximum Vbus voltage (00b == 20V << 280 * <8> :: SBU supported (0b == supported, << 281 * <7> :: SBU type (0b == passive, 1b == a << 282 * <6:5> :: Vbus current handling capability << 283 * <4> :: Vbus through cable (0b == no, 1b << 284 * <3> :: SOP" controller present? (0b == << 285 * <2:0> :: USB highest speed << 286 */ << 287 /* Cable VDO Version */ << 288 #define CABLE_VDO_VER1_0 0 << 289 #define CABLE_VDO_VER1_3 3 << 290 << 291 /* Connector Type (_ATYPE and _BTYPE are for P << 292 #define CABLE_ATYPE 0 << 293 #define CABLE_BTYPE 1 << 294 #define CABLE_CTYPE 2 << 295 #define CABLE_CAPTIVE 3 << 296 << 297 /* Cable Latency */ << 298 #define CABLE_LATENCY_1M 1 << 299 #define CABLE_LATENCY_2M 2 << 300 #define CABLE_LATENCY_3M 3 << 301 #define CABLE_LATENCY_4M 4 << 302 #define CABLE_LATENCY_5M 5 << 303 #define CABLE_LATENCY_6M 6 << 304 #define CABLE_LATENCY_7M 7 << 305 #define CABLE_LATENCY_7M_PLUS 8 << 306 << 307 /* Cable Termination Type */ << 308 #define PCABLE_VCONN_NOT_REQ 0 << 309 #define PCABLE_VCONN_REQ 1 << 310 #define ACABLE_ONE_END 2 << 311 #define ACABLE_BOTH_END 3 << 312 << 313 /* Maximum Vbus Voltage */ << 314 #define CABLE_MAX_VBUS_20V 0 << 315 #define CABLE_MAX_VBUS_30V 1 << 316 #define CABLE_MAX_VBUS_40V 2 << 317 #define CABLE_MAX_VBUS_50V 3 << 318 << 319 /* Active Cable SBU Supported/Type */ << 320 #define ACABLE_SBU_SUPP 0 << 321 #define ACABLE_SBU_NOT_SUPP 1 << 322 #define ACABLE_SBU_PASSIVE 0 << 323 #define ACABLE_SBU_ACTIVE 1 << 324 << 325 /* Vbus Current Handling Capability */ << 326 #define CABLE_CURR_DEF 0 << 327 #define CABLE_CURR_3A 1 << 328 #define CABLE_CURR_5A 2 << 329 << 330 /* USB SuperSpeed Signaling Support (PD Rev2.0 << 331 #define CABLE_USBSS_U2_ONLY 0 << 332 #define CABLE_USBSS_U31_GEN1 1 << 333 #define CABLE_USBSS_U31_GEN2 2 << 334 << 335 /* USB Highest Speed */ << 336 #define CABLE_USB2_ONLY 0 << 337 #define CABLE_USB32_GEN1 1 << 338 #define CABLE_USB32_4_GEN2 2 << 339 #define CABLE_USB4_GEN3 3 << 340 << 341 #define VDO_CABLE(hw, fw, cbl, lat, term, tx1d << 342 (((hw) & 0x7) << 28 | ((fw) & 0x7) << << 343 | ((lat) & 0x7) << 13 | ((term) & 0x3 << 344 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 345 | (vps) << 4 | (sopp) << 3 | ((usbss) << 346 #define VDO_PCABLE(hw, fw, ver, conn, lat, ter << 347 (((hw) & 0xf) << 28 | ((fw) & 0xf) << << 348 | ((conn) & 0x3) << 18 | ((lat) & 0xf << 349 | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 350 #define VDO_ACABLE1(hw, fw, ver, conn, lat, te << 351 (((hw) & 0xf) << 28 | ((fw) & 0xf) << << 352 | ((conn) & 0x3) << 18 | ((lat) & 0xf << 353 | ((vbm) & 0x3) << 9 | (sbu) << 8 | ( << 354 | (vbt) << 4 | (sopp) << 3 | ((spd) & << 355 << 356 /* << 357 * Active Cable VDO 2 << 358 * --------- << 359 * <31:24> :: Maximum operating temperature << 360 * <23:16> :: Shutdown temperature << 361 * <15> :: Reserved, Shall be set to zero << 362 * <14:12> :: U3/CLd power << 363 * <11> :: U3 to U0 transition mode (0b == << 364 * <10> :: Physical connection (0b == coppe << 365 * <9> :: Active element (0b == redriver, << 366 * <8> :: USB4 supported (0b == yes, 1b == << 367 * <7:6> :: USB2 hub hops consumed << 368 * <5> :: USB2 supported (0b == yes, 1b == << 369 * <4> :: USB3.2 supported (0b == yes, 1b << 370 * <3> :: USB lanes supported (0b == one l << 371 * <2> :: Optically isolated active cable << 372 * <1> :: Reserved, Shall be set to zero << 373 * <0> :: USB gen (0b == gen1, 1b == gen2+ << 374 */ << 375 /* U3/CLd Power*/ << 376 #define ACAB2_U3_CLD_10MW_PLUS 0 << 377 #define ACAB2_U3_CLD_10MW 1 << 378 #define ACAB2_U3_CLD_5MW 2 << 379 #define ACAB2_U3_CLD_1MW 3 << 380 #define ACAB2_U3_CLD_500UW 4 << 381 #define ACAB2_U3_CLD_200UW 5 << 382 #define ACAB2_U3_CLD_50UW 6 << 383 << 384 /* Other Active Cable VDO 2 Fields */ << 385 #define ACAB2_U3U0_DIRECT 0 << 386 #define ACAB2_U3U0_U3S 1 << 387 #define ACAB2_PHY_COPPER 0 << 388 #define ACAB2_PHY_OPTICAL 1 << 389 #define ACAB2_REDRIVER 0 << 390 #define ACAB2_RETIMER 1 << 391 #define ACAB2_USB4_SUPP 0 << 392 #define ACAB2_USB4_NOT_SUPP 1 << 393 #define ACAB2_USB2_SUPP 0 << 394 #define ACAB2_USB2_NOT_SUPP 1 << 395 #define ACAB2_USB32_SUPP 0 << 396 #define ACAB2_USB32_NOT_SUPP 1 << 397 #define ACAB2_LANES_ONE 0 << 398 #define ACAB2_LANES_TWO 1 << 399 #define ACAB2_OPT_ISO_NO 0 << 400 #define ACAB2_OPT_ISO_YES 1 << 401 #define ACAB2_GEN_1 0 << 402 #define ACAB2_GEN_2_PLUS 1 << 403 << 404 #define VDO_ACABLE2(mtemp, stemp, u3p, trans, << 405 (((mtemp) & 0xff) << 24 | ((stemp) & 0 << 406 | (trans) << 11 | (phy) << 10 | (ele) << 407 | ((hops) & 0x3) << 6 | (u2) << 5 | ( << 408 | (iso) << 2 | (gen)) << 409 << 410 /* << 411 * AMA VDO (PD Rev2.0) << 412 * --------- << 413 * <31:28> :: Cable HW version << 414 * <27:24> :: Cable FW version << 415 * <23:12> :: Reserved, Shall be set to zero << 416 * <11> :: SSTX1 Directionality support (0b << 417 * <10> :: SSTX2 Directionality support << 418 * <9> :: SSRX1 Directionality support << 419 * <8> :: SSRX2 Directionality support << 420 * <7:5> :: Vconn power << 421 * <4> :: Vconn power required << 422 * <3> :: Vbus power required << 423 * <2:0> :: USB SS Signaling support << 424 */ << 425 #define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d << 426 (((hw) & 0x7) << 28 | ((fw) & 0x7) << << 427 | (tx1d) << 11 | (tx2d) << 10 | (rx1d << 428 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | << 429 | ((usbss) & 0x7)) << 430 << 431 #define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo << 432 #define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo << 433 << 434 #define AMA_USBSS_U2_ONLY 0 << 435 #define AMA_USBSS_U31_GEN1 1 << 436 #define AMA_USBSS_U31_GEN2 2 << 437 #define AMA_USBSS_BBONLY 3 << 438 << 439 /* << 440 * VPD VDO << 441 * --------- << 442 * <31:28> :: HW version << 443 * <27:24> :: FW version << 444 * <23:21> :: VDO version << 445 * <20:17> :: Reserved, Shall be set to zero << 446 * <16:15> :: Maximum Vbus voltage (00b == 20V << 447 * <14> :: Charge through current support ( << 448 * <13> :: Reserved, Shall be set to zero << 449 * <12:7> :: Vbus impedance << 450 * <6:1> :: Ground impedance << 451 * <0> :: Charge through support (0b == no << 452 */ << 453 #define VPD_VDO_VER1_0 0 << 454 #define VPD_MAX_VBUS_20V 0 << 455 #define VPD_MAX_VBUS_30V 1 << 456 #define VPD_MAX_VBUS_40V 2 << 457 #define VPD_MAX_VBUS_50V 3 << 458 #define VPDCT_CURR_3A 0 << 459 #define VPDCT_CURR_5A 1 << 460 #define VPDCT_NOT_SUPP 0 << 461 #define VPDCT_SUPP 1 << 462 << 463 #define VDO_VPD(hw, fw, ver, vbm, curr, vbi, g << 464 (((hw) & 0xf) << 28 | ((fw) & 0xf) << << 465 | ((vbm) & 0x3) << 15 | (curr) << 14 << 466 | ((gi) & 0x3f) << 1 | (ct)) << 467 << 468 #endif /* __DT_POWER_DELIVERY_H */ << 469 89
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.