1 /* SPDX-License-Identifier: GPL-2.0 */ 1
2 /*
3 * This header file contains public constants
4 * both the SCSI initiator and the SCSI target
5 *
6 * For documentation on the OPCODES, MESSAGES,
7 * please consult the SCSI standard.
8 */
9
10 #ifndef _SCSI_PROTO_H_
11 #define _SCSI_PROTO_H_
12
13 #include <linux/build_bug.h>
14 #include <linux/types.h>
15
16 /*
17 * SCSI opcodes
18 */
19
20 #define TEST_UNIT_READY 0x00
21 #define REZERO_UNIT 0x01
22 #define REQUEST_SENSE 0x03
23 #define FORMAT_UNIT 0x04
24 #define READ_BLOCK_LIMITS 0x05
25 #define REASSIGN_BLOCKS 0x07
26 #define INITIALIZE_ELEMENT_STATUS 0x07
27 #define READ_6 0x08
28 #define WRITE_6 0x0a
29 #define SEEK_6 0x0b
30 #define READ_REVERSE 0x0f
31 #define WRITE_FILEMARKS 0x10
32 #define SPACE 0x11
33 #define INQUIRY 0x12
34 #define RECOVER_BUFFERED_DATA 0x14
35 #define MODE_SELECT 0x15
36 #define RESERVE 0x16
37 #define RELEASE 0x17
38 #define COPY 0x18
39 #define ERASE 0x19
40 #define MODE_SENSE 0x1a
41 #define START_STOP 0x1b
42 #define RECEIVE_DIAGNOSTIC 0x1c
43 #define SEND_DIAGNOSTIC 0x1d
44 #define ALLOW_MEDIUM_REMOVAL 0x1e
45
46 #define READ_FORMAT_CAPACITIES 0x23
47 #define SET_WINDOW 0x24
48 #define READ_CAPACITY 0x25
49 #define READ_10 0x28
50 #define WRITE_10 0x2a
51 #define SEEK_10 0x2b
52 #define POSITION_TO_ELEMENT 0x2b
53 #define WRITE_VERIFY 0x2e
54 #define VERIFY 0x2f
55 #define SEARCH_HIGH 0x30
56 #define SEARCH_EQUAL 0x31
57 #define SEARCH_LOW 0x32
58 #define SET_LIMITS 0x33
59 #define PRE_FETCH 0x34
60 #define READ_POSITION 0x34
61 #define SYNCHRONIZE_CACHE 0x35
62 #define LOCK_UNLOCK_CACHE 0x36
63 #define READ_DEFECT_DATA 0x37
64 #define MEDIUM_SCAN 0x38
65 #define COMPARE 0x39
66 #define COPY_VERIFY 0x3a
67 #define WRITE_BUFFER 0x3b
68 #define READ_BUFFER 0x3c
69 #define UPDATE_BLOCK 0x3d
70 #define READ_LONG 0x3e
71 #define WRITE_LONG 0x3f
72 #define CHANGE_DEFINITION 0x40
73 #define WRITE_SAME 0x41
74 #define UNMAP 0x42
75 #define READ_TOC 0x43
76 #define READ_HEADER 0x44
77 #define GET_EVENT_STATUS_NOTIFICATION 0x4a
78 #define LOG_SELECT 0x4c
79 #define LOG_SENSE 0x4d
80 #define XDWRITEREAD_10 0x53
81 #define MODE_SELECT_10 0x55
82 #define RESERVE_10 0x56
83 #define RELEASE_10 0x57
84 #define MODE_SENSE_10 0x5a
85 #define PERSISTENT_RESERVE_IN 0x5e
86 #define PERSISTENT_RESERVE_OUT 0x5f
87 #define VARIABLE_LENGTH_CMD 0x7f
88 #define REPORT_LUNS 0xa0
89 #define SECURITY_PROTOCOL_IN 0xa2
90 #define MAINTENANCE_IN 0xa3
91 #define MAINTENANCE_OUT 0xa4
92 #define MOVE_MEDIUM 0xa5
93 #define EXCHANGE_MEDIUM 0xa6
94 #define READ_12 0xa8
95 #define SERVICE_ACTION_OUT_12 0xa9
96 #define WRITE_12 0xaa
97 #define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsol
98 #define SERVICE_ACTION_IN_12 0xab
99 #define WRITE_VERIFY_12 0xae
100 #define VERIFY_12 0xaf
101 #define SEARCH_HIGH_12 0xb0
102 #define SEARCH_EQUAL_12 0xb1
103 #define SEARCH_LOW_12 0xb2
104 #define SECURITY_PROTOCOL_OUT 0xb5
105 #define READ_ELEMENT_STATUS 0xb8
106 #define SEND_VOLUME_TAG 0xb6
107 #define WRITE_LONG_2 0xea
108 #define EXTENDED_COPY 0x83
109 #define RECEIVE_COPY_RESULTS 0x84
110 #define ACCESS_CONTROL_IN 0x86
111 #define ACCESS_CONTROL_OUT 0x87
112 #define READ_16 0x88
113 #define COMPARE_AND_WRITE 0x89
114 #define WRITE_16 0x8a
115 #define READ_ATTRIBUTE 0x8c
116 #define WRITE_ATTRIBUTE 0x8d
117 #define WRITE_VERIFY_16 0x8e
118 #define VERIFY_16 0x8f
119 #define SYNCHRONIZE_CACHE_16 0x91
120 #define WRITE_SAME_16 0x93
121 #define ZBC_OUT 0x94
122 #define ZBC_IN 0x95
123 #define WRITE_ATOMIC_16 0x9c
124 #define SERVICE_ACTION_BIDIRECTIONAL 0x9d
125 #define SERVICE_ACTION_IN_16 0x9e
126 #define SERVICE_ACTION_OUT_16 0x9f
127 /* values for service action in */
128 #define SAI_READ_CAPACITY_16 0x10
129 #define SAI_GET_LBA_STATUS 0x12
130 #define SAI_REPORT_REFERRALS 0x13
131 #define SAI_GET_STREAM_STATUS 0x16
132 /* values for maintenance in */
133 #define MI_REPORT_IDENTIFYING_INFORMATION 0x05
134 #define MI_REPORT_TARGET_PGS 0x0a
135 #define MI_REPORT_ALIASES 0x0b
136 #define MI_REPORT_SUPPORTED_OPERATION_CODES 0x
137 #define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FU
138 #define MI_REPORT_PRIORITY 0x0e
139 #define MI_REPORT_TIMESTAMP 0x0f
140 #define MI_MANAGEMENT_PROTOCOL_IN 0x10
141 /* value for MI_REPORT_TARGET_PGS ext header *
142 #define MI_EXT_HDR_PARAM_FMT 0x20
143 /* values for maintenance out */
144 #define MO_SET_IDENTIFYING_INFORMATION 0x06
145 #define MO_SET_TARGET_PGS 0x0a
146 #define MO_CHANGE_ALIASES 0x0b
147 #define MO_SET_PRIORITY 0x0e
148 #define MO_SET_TIMESTAMP 0x0f
149 #define MO_MANAGEMENT_PROTOCOL_OUT 0x10
150 /* values for ZBC_IN */
151 #define ZI_REPORT_ZONES 0x00
152 /* values for ZBC_OUT */
153 #define ZO_CLOSE_ZONE 0x01
154 #define ZO_FINISH_ZONE 0x02
155 #define ZO_OPEN_ZONE 0x03
156 #define ZO_RESET_WRITE_POINTER 0x04
157 /* values for PR in service action */
158 #define READ_KEYS 0x00
159 #define READ_RESERVATION 0x01
160 #define REPORT_CAPABILITES 0x02
161 #define READ_FULL_STATUS 0x03
162 /* values for variable length command */
163 #define XDREAD_32 0x03
164 #define XDWRITE_32 0x04
165 #define XPWRITE_32 0x06
166 #define XDWRITEREAD_32 0x07
167 #define READ_32 0x09
168 #define VERIFY_32 0x0a
169 #define WRITE_32 0x0b
170 #define WRITE_VERIFY_32 0x0c
171 #define WRITE_SAME_32 0x0d
172 #define ATA_32 0x1ff0
173
174 /* Values for T10/04-262r7 */
175 #define ATA_16 0x85 /* 16-
176 #define ATA_12 0xa1 /* 12-
177
178 /* Vendor specific CDBs start here */
179 #define VENDOR_SPECIFIC_CDB 0xc0
180
181 /*
182 * SCSI command lengths
183 */
184
185 #define SCSI_MAX_VARLEN_CDB_SIZE 260
186
187 /* defined in T10 SCSI Primary Commands-2 (SPC
188 struct scsi_varlen_cdb_hdr {
189 __u8 opcode; /* opcode always =
190 __u8 control;
191 __u8 misc[5];
192 __u8 additional_cdb_length; /*
193 __be16 service_action;
194 /* service specific data follows */
195 };
196
197 /*
198 * SCSI Architecture Model (SAM) Status codes
199 * T10/1561-D Revision 4 Draft dated 7th Nove
200 */
201 enum sam_status {
202 SAM_STAT_GOOD
203 SAM_STAT_CHECK_CONDITION
204 SAM_STAT_CONDITION_MET
205 SAM_STAT_BUSY
206 SAM_STAT_INTERMEDIATE
207 SAM_STAT_INTERMEDIATE_CONDITION_MET
208 SAM_STAT_RESERVATION_CONFLICT
209 SAM_STAT_COMMAND_TERMINATED
210 SAM_STAT_TASK_SET_FULL
211 SAM_STAT_ACA_ACTIVE
212 SAM_STAT_TASK_ABORTED
213 };
214
215 #define STATUS_MASK 0xfe
216
217 /*
218 * SENSE KEYS
219 */
220 #define NO_SENSE 0x00
221 #define RECOVERED_ERROR 0x01
222 #define NOT_READY 0x02
223 #define MEDIUM_ERROR 0x03
224 #define HARDWARE_ERROR 0x04
225 #define ILLEGAL_REQUEST 0x05
226 #define UNIT_ATTENTION 0x06
227 #define DATA_PROTECT 0x07
228 #define BLANK_CHECK 0x08
229 #define VENDOR_SPECIFIC 0x09
230 #define COPY_ABORTED 0x0a
231 #define ABORTED_COMMAND 0x0b
232 #define VOLUME_OVERFLOW 0x0d
233 #define MISCOMPARE 0x0e
234 #define COMPLETED 0x0f
235
236 /*
237 * DEVICE TYPES
238 * Please keep them in 0x%02x format for $MOD
239 */
240
241 #define TYPE_DISK 0x00
242 #define TYPE_TAPE 0x01
243 #define TYPE_PRINTER 0x02
244 #define TYPE_PROCESSOR 0x03 /* HP scan
245 #define TYPE_WORM 0x04 /* Treated
246 #define TYPE_ROM 0x05
247 #define TYPE_SCANNER 0x06
248 #define TYPE_MOD 0x07 /* Magneto
249 * - treat
250 #define TYPE_MEDIUM_CHANGER 0x08
251 #define TYPE_COMM 0x09 /* Communi
252 #define TYPE_RAID 0x0c
253 #define TYPE_ENCLOSURE 0x0d /* Enclosu
254 #define TYPE_RBC 0x0e
255 #define TYPE_OSD 0x11
256 #define TYPE_ZBC 0x14
257 #define TYPE_WLUN 0x1e /* well-kn
258 #define TYPE_NO_LUN 0x7f
259
260 /* SCSI protocols; these are taken from SPC-3
261 enum scsi_protocol {
262 SCSI_PROTOCOL_FCP = 0, /* Fibre Chann
263 SCSI_PROTOCOL_SPI = 1, /* parallel SC
264 SCSI_PROTOCOL_SSA = 2, /* Serial Stor
265 SCSI_PROTOCOL_SBP = 3, /* firewire */
266 SCSI_PROTOCOL_SRP = 4, /* Infiniband
267 SCSI_PROTOCOL_ISCSI = 5,
268 SCSI_PROTOCOL_SAS = 6,
269 SCSI_PROTOCOL_ADT = 7, /* Media Chang
270 SCSI_PROTOCOL_ATA = 8,
271 SCSI_PROTOCOL_UNSPEC = 0xf, /* No spec
272 };
273
274 /*
275 * ScsiLun: 8 byte LUN.
276 */
277 struct scsi_lun {
278 __u8 scsi_lun[8];
279 };
280
281 /* SBC-5 IO advice hints group descriptor */
282 struct scsi_io_group_descriptor {
283 #if defined(__BIG_ENDIAN)
284 u8 io_advice_hints_mode: 2;
285 u8 reserved1: 3;
286 u8 st_enble: 1;
287 u8 cs_enble: 1;
288 u8 ic_enable: 1;
289 #elif defined(__LITTLE_ENDIAN)
290 u8 ic_enable: 1;
291 u8 cs_enble: 1;
292 u8 st_enble: 1;
293 u8 reserved1: 3;
294 u8 io_advice_hints_mode: 2;
295 #else
296 #error
297 #endif
298 u8 reserved2[3];
299 /* Logical block markup descriptor */
300 #if defined(__BIG_ENDIAN)
301 u8 acdlu: 1;
302 u8 reserved3: 1;
303 u8 rlbsr: 2;
304 u8 lbm_descriptor_type: 4;
305 #elif defined(__LITTLE_ENDIAN)
306 u8 lbm_descriptor_type: 4;
307 u8 rlbsr: 2;
308 u8 reserved3: 1;
309 u8 acdlu: 1;
310 #else
311 #error
312 #endif
313 u8 params[2];
314 u8 reserved4;
315 u8 reserved5[8];
316 };
317
318 static_assert(sizeof(struct scsi_io_group_desc
319
320 /* SCSI stream status descriptor */
321 struct scsi_stream_status {
322 #if defined(__BIG_ENDIAN)
323 u8 perm: 1;
324 u8 reserved1: 7;
325 #elif defined(__LITTLE_ENDIAN)
326 u8 reserved1: 7;
327 u8 perm: 1;
328 #else
329 #error
330 #endif
331 u8 reserved2;
332 __be16 stream_identifier;
333 #if defined(__BIG_ENDIAN)
334 u8 reserved3: 2;
335 u8 rel_lifetime: 6;
336 #elif defined(__LITTLE_ENDIAN)
337 u8 rel_lifetime: 6;
338 u8 reserved3: 2;
339 #else
340 #error
341 #endif
342 u8 reserved4[3];
343 };
344
345 static_assert(sizeof(struct scsi_stream_status
346
347 /* GET STREAM STATUS parameter data */
348 struct scsi_stream_status_header {
349 __be32 len; /* length in bytes of
350 u16 reserved;
351 __be16 number_of_open_streams;
352 DECLARE_FLEX_ARRAY(struct scsi_stream_
353 };
354
355 static_assert(sizeof(struct scsi_stream_status
356
357 /* SPC asymmetric access states */
358 #define SCSI_ACCESS_STATE_OPTIMAL 0x00
359 #define SCSI_ACCESS_STATE_ACTIVE 0x01
360 #define SCSI_ACCESS_STATE_STANDBY 0x02
361 #define SCSI_ACCESS_STATE_UNAVAILABLE 0x03
362 #define SCSI_ACCESS_STATE_LBA 0x04
363 #define SCSI_ACCESS_STATE_OFFLINE 0x0e
364 #define SCSI_ACCESS_STATE_TRANSITIONING 0x0f
365
366 /* Values for REPORT TARGET GROUP STATES */
367 #define SCSI_ACCESS_STATE_MASK 0x0f
368 #define SCSI_ACCESS_STATE_PREFERRED 0x80
369
370 /* Reporting options for REPORT ZONES */
371 enum zbc_zone_reporting_options {
372 ZBC_ZONE_REPORTING_OPTION_ALL
373 ZBC_ZONE_REPORTING_OPTION_EMPTY
374 ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPE
375 ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPE
376 ZBC_ZONE_REPORTING_OPTION_CLOSED
377 ZBC_ZONE_REPORTING_OPTION_FULL
378 ZBC_ZONE_REPORTING_OPTION_READONLY
379 ZBC_ZONE_REPORTING_OPTION_OFFLINE
380 /* 0x08 to 0x0f are reserved */
381 ZBC_ZONE_REPORTING_OPTION_NEED_RESET_W
382 ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE
383 /* 0x12 to 0x3e are reserved */
384 ZBC_ZONE_REPORTING_OPTION_NON_WP
385 };
386
387 #define ZBC_REPORT_ZONE_PARTIAL 0x80
388
389 /* Zone types of REPORT ZONES zone descriptors
390 enum zbc_zone_type {
391 ZBC_ZONE_TYPE_CONV = 0x1,
392 ZBC_ZONE_TYPE_SEQWRITE_REQ = 0x2,
393 ZBC_ZONE_TYPE_SEQWRITE_PREF = 0x3,
394 ZBC_ZONE_TYPE_SEQ_OR_BEFORE_REQ = 0x4,
395 ZBC_ZONE_TYPE_GAP = 0x5,
396 /* 0x6 to 0xf are reserved */
397 };
398
399 /* Zone conditions of REPORT ZONES zone descri
400 enum zbc_zone_cond {
401 ZBC_ZONE_COND_NO_WP = 0x0,
402 ZBC_ZONE_COND_EMPTY = 0x1,
403 ZBC_ZONE_COND_IMP_OPEN = 0x2,
404 ZBC_ZONE_COND_EXP_OPEN = 0x3,
405 ZBC_ZONE_COND_CLOSED = 0x4,
406 /* 0x5 to 0xc are reserved */
407 ZBC_ZONE_COND_READONLY = 0xd,
408 ZBC_ZONE_COND_FULL = 0xe,
409 ZBC_ZONE_COND_OFFLINE = 0xf,
410 };
411
412 enum zbc_zone_alignment_method {
413 ZBC_CONSTANT_ZONE_LENGTH = 0x1,
414 ZBC_CONSTANT_ZONE_START_OFFSET = 0x8,
415 };
416
417 /* Version descriptor values for INQUIRY */
418 enum scsi_version_descriptor {
419 SCSI_VERSION_DESCRIPTOR_FCP4 = 0x0a
420 SCSI_VERSION_DESCRIPTOR_ISCSI = 0x09
421 SCSI_VERSION_DESCRIPTOR_SAM5 = 0x00
422 SCSI_VERSION_DESCRIPTOR_SAS3 = 0x0c
423 SCSI_VERSION_DESCRIPTOR_SBC3 = 0x04
424 SCSI_VERSION_DESCRIPTOR_SBP3 = 0x09
425 SCSI_VERSION_DESCRIPTOR_SPC4 = 0x04
426 SCSI_VERSION_DESCRIPTOR_SRP = 0x09
427 };
428
429 enum scsi_support_opcode {
430 SCSI_SUPPORT_NO_INFO = 0,
431 SCSI_SUPPORT_NOT_SUPPORTED = 1,
432 SCSI_SUPPORT_FULL = 3,
433 SCSI_SUPPORT_VENDOR = 5,
434 };
435
436 #define SCSI_CONTROL_MASK 0
437 #define SCSI_GROUP_NUMBER_MASK 0
438
439 #endif /* _SCSI_PROTO_H_ */
440
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.