1 // SPDX-License-Identifier: GPL-2.0+ 1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright (c) 2021 Facebook Inc. 2 // Copyright (c) 2021 Facebook Inc.
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "aspeed-g6.dtsi" 5 #include "aspeed-g6.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h> 6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/usb/pd.h> 7 #include <dt-bindings/usb/pd.h>
8 #include <dt-bindings/leds/leds-pca955x.h> 8 #include <dt-bindings/leds/leds-pca955x.h>
9 #include <dt-bindings/interrupt-controller/irq 9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/i2c/i2c.h> 10 #include <dt-bindings/i2c/i2c.h>
11 11
12 / { 12 / {
13 model = "Facebook Bletchley BMC"; 13 model = "Facebook Bletchley BMC";
14 compatible = "facebook,bletchley-bmc", 14 compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
15 15
16 aliases { 16 aliases {
17 serial4 = &uart5; 17 serial4 = &uart5;
18 }; 18 };
19 19
20 chosen { 20 chosen {
21 bootargs = "console=ttyS4,5760 21 bootargs = "console=ttyS4,57600n8";
22 }; 22 };
23 23
24 memory@80000000 { 24 memory@80000000 {
25 device_type = "memory"; 25 device_type = "memory";
26 reg = <0x80000000 0x80000000>; 26 reg = <0x80000000 0x80000000>;
27 }; 27 };
28 28
29 iio-hwmon { 29 iio-hwmon {
30 compatible = "iio-hwmon"; 30 compatible = "iio-hwmon";
31 io-channels = <&adc0 0>, <&adc 31 io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
32 <&adc0 4>, <&adc0 5>, 32 <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
33 <&adc1 0>, <&adc1 1>, 33 <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
34 <&adc1 4>, <&adc1 5>, 34 <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
35 }; 35 };
36 36
37 spi1_gpio: spi1-gpio { 37 spi1_gpio: spi1-gpio {
38 compatible = "spi-gpio"; 38 compatible = "spi-gpio";
39 #address-cells = <1>; 39 #address-cells = <1>;
40 #size-cells = <0>; 40 #size-cells = <0>;
41 41
42 gpio-sck = <&gpio0 ASPEED_GPIO 42 gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
43 gpio-mosi = <&gpio0 ASPEED_GPI 43 gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
44 gpio-miso = <&gpio0 ASPEED_GPI 44 gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
45 num-chipselects = <1>; 45 num-chipselects = <1>;
46 cs-gpios = <&gpio0 ASPEED_GPIO 46 cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
47 47
48 tpm@0 { 48 tpm@0 {
49 compatible = "infineon 49 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
50 spi-max-frequency = <3 50 spi-max-frequency = <33000000>;
51 reg = <0>; 51 reg = <0>;
52 }; 52 };
53 }; 53 };
54 54
55 switchphy: ethernet-phy@0 { 55 switchphy: ethernet-phy@0 {
56 // Fixed link 56 // Fixed link
57 }; 57 };
58 58
59 front_gpio_leds { 59 front_gpio_leds {
60 compatible = "gpio-leds"; 60 compatible = "gpio-leds";
61 sys_log_id { 61 sys_log_id {
62 default-state = "off"; 62 default-state = "off";
63 gpios = <&front_leds 0 63 gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
64 }; 64 };
65 }; 65 };
66 66
67 fan_gpio_leds { 67 fan_gpio_leds {
68 compatible = "gpio-leds"; 68 compatible = "gpio-leds";
69 fan0_blue { 69 fan0_blue {
70 retain-state-shutdown; 70 retain-state-shutdown;
71 default-state = "on"; 71 default-state = "on";
72 gpios = <&fan_leds 8 G 72 gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
73 }; 73 };
74 fan1_blue { 74 fan1_blue {
75 retain-state-shutdown; 75 retain-state-shutdown;
76 default-state = "on"; 76 default-state = "on";
77 gpios = <&fan_leds 9 G 77 gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
78 }; 78 };
79 fan2_blue { 79 fan2_blue {
80 retain-state-shutdown; 80 retain-state-shutdown;
81 default-state = "on"; 81 default-state = "on";
82 gpios = <&fan_leds 10 82 gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
83 }; 83 };
84 fan3_blue { 84 fan3_blue {
85 retain-state-shutdown; 85 retain-state-shutdown;
86 default-state = "on"; 86 default-state = "on";
87 gpios = <&fan_leds 11 87 gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
88 }; 88 };
89 fan0_amber { 89 fan0_amber {
90 retain-state-shutdown; 90 retain-state-shutdown;
91 default-state = "off"; 91 default-state = "off";
92 gpios = <&fan_leds 12 92 gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
93 }; 93 };
94 fan1_amber { 94 fan1_amber {
95 retain-state-shutdown; 95 retain-state-shutdown;
96 default-state = "off"; 96 default-state = "off";
97 gpios = <&fan_leds 13 97 gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
98 }; 98 };
99 fan2_amber { 99 fan2_amber {
100 retain-state-shutdown; 100 retain-state-shutdown;
101 default-state = "off"; 101 default-state = "off";
102 gpios = <&fan_leds 14 102 gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
103 }; 103 };
104 fan3_amber { 104 fan3_amber {
105 retain-state-shutdown; 105 retain-state-shutdown;
106 default-state = "off"; 106 default-state = "off";
107 gpios = <&fan_leds 15 107 gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
108 }; 108 };
109 }; 109 };
110 110
111 sled1_gpio_leds { 111 sled1_gpio_leds {
112 compatible = "gpio-leds"; 112 compatible = "gpio-leds";
113 sled1_amber { 113 sled1_amber {
114 retain-state-shutdown; 114 retain-state-shutdown;
115 default-state = "keep" 115 default-state = "keep";
116 gpios = <&sled1_leds 0 116 gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
117 }; 117 };
118 sled1_blue { 118 sled1_blue {
119 retain-state-shutdown; 119 retain-state-shutdown;
120 default-state = "keep" 120 default-state = "keep";
121 gpios = <&sled1_leds 1 121 gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
122 }; 122 };
123 }; 123 };
124 124
125 sled2_gpio_leds { 125 sled2_gpio_leds {
126 compatible = "gpio-leds"; 126 compatible = "gpio-leds";
127 sled2_amber { 127 sled2_amber {
128 retain-state-shutdown; 128 retain-state-shutdown;
129 default-state = "keep" 129 default-state = "keep";
130 gpios = <&sled2_leds 0 130 gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
131 }; 131 };
132 sled2_blue { 132 sled2_blue {
133 retain-state-shutdown; 133 retain-state-shutdown;
134 default-state = "keep" 134 default-state = "keep";
135 gpios = <&sled2_leds 1 135 gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
136 }; 136 };
137 }; 137 };
138 138
139 sled3_gpio_leds { 139 sled3_gpio_leds {
140 compatible = "gpio-leds"; 140 compatible = "gpio-leds";
141 sled3_amber { 141 sled3_amber {
142 retain-state-shutdown; 142 retain-state-shutdown;
143 default-state = "keep" 143 default-state = "keep";
144 gpios = <&sled3_leds 0 144 gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
145 }; 145 };
146 sled3_blue { 146 sled3_blue {
147 retain-state-shutdown; 147 retain-state-shutdown;
148 default-state = "keep" 148 default-state = "keep";
149 gpios = <&sled3_leds 1 149 gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
150 }; 150 };
151 }; 151 };
152 152
153 sled4_gpio_leds { 153 sled4_gpio_leds {
154 compatible = "gpio-leds"; 154 compatible = "gpio-leds";
155 sled4_amber { 155 sled4_amber {
156 retain-state-shutdown; 156 retain-state-shutdown;
157 default-state = "keep" 157 default-state = "keep";
158 gpios = <&sled4_leds 0 158 gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
159 }; 159 };
160 sled4_blue { 160 sled4_blue {
161 retain-state-shutdown; 161 retain-state-shutdown;
162 default-state = "keep" 162 default-state = "keep";
163 gpios = <&sled4_leds 1 163 gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
164 }; 164 };
165 }; 165 };
166 166
167 sled5_gpio_leds { 167 sled5_gpio_leds {
168 compatible = "gpio-leds"; 168 compatible = "gpio-leds";
169 sled5_amber { 169 sled5_amber {
170 retain-state-shutdown; 170 retain-state-shutdown;
171 default-state = "keep" 171 default-state = "keep";
172 gpios = <&sled5_leds 0 172 gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
173 }; 173 };
174 sled5_blue { 174 sled5_blue {
175 retain-state-shutdown; 175 retain-state-shutdown;
176 default-state = "keep" 176 default-state = "keep";
177 gpios = <&sled5_leds 1 177 gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
178 }; 178 };
179 }; 179 };
180 180
181 sled6_gpio_leds { 181 sled6_gpio_leds {
182 compatible = "gpio-leds"; 182 compatible = "gpio-leds";
183 sled6_amber { 183 sled6_amber {
184 retain-state-shutdown; 184 retain-state-shutdown;
185 default-state = "keep" 185 default-state = "keep";
186 gpios = <&sled6_leds 0 186 gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
187 }; 187 };
188 sled6_blue { 188 sled6_blue {
189 retain-state-shutdown; 189 retain-state-shutdown;
190 default-state = "keep" 190 default-state = "keep";
191 gpios = <&sled6_leds 1 191 gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
192 }; 192 };
193 }; 193 };
194 194
195 gpio-keys { 195 gpio-keys {
196 compatible = "gpio-keys"; 196 compatible = "gpio-keys";
197 197
198 presence-sled1 { 198 presence-sled1 {
199 label = "presence-sled 199 label = "presence-sled1";
200 gpios = <&gpio0 ASPEED 200 gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
201 linux,code = <ASPEED_G 201 linux,code = <ASPEED_GPIO(H, 2)>;
202 }; 202 };
203 presence-sled2 { 203 presence-sled2 {
204 label = "presence-sled 204 label = "presence-sled2";
205 gpios = <&gpio0 ASPEED 205 gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
206 linux,code = <ASPEED_G 206 linux,code = <ASPEED_GPIO(H, 3)>;
207 }; 207 };
208 presence-sled3 { 208 presence-sled3 {
209 label = "presence-sled 209 label = "presence-sled3";
210 gpios = <&gpio0 ASPEED 210 gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
211 linux,code = <ASPEED_G 211 linux,code = <ASPEED_GPIO(H, 4)>;
212 }; 212 };
213 presence-sled4 { 213 presence-sled4 {
214 label = "presence-sled 214 label = "presence-sled4";
215 gpios = <&gpio0 ASPEED 215 gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
216 linux,code = <ASPEED_G 216 linux,code = <ASPEED_GPIO(H, 5)>;
217 }; 217 };
218 presence-sled5 { 218 presence-sled5 {
219 label = "presence-sled 219 label = "presence-sled5";
220 gpios = <&gpio0 ASPEED 220 gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
221 linux,code = <ASPEED_G 221 linux,code = <ASPEED_GPIO(H, 6)>;
222 }; 222 };
223 presence-sled6 { 223 presence-sled6 {
224 label = "presence-sled 224 label = "presence-sled6";
225 gpios = <&gpio0 ASPEED 225 gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
226 linux,code = <ASPEED_G 226 linux,code = <ASPEED_GPIO(H, 7)>;
227 }; 227 };
228 }; 228 };
229 229
230 vbus_sled1: vbus_sled1 { 230 vbus_sled1: vbus_sled1 {
231 compatible = "regulator-fixed" 231 compatible = "regulator-fixed";
232 regulator-name = "vbus_sled1"; 232 regulator-name = "vbus_sled1";
233 regulator-min-microvolt = <500 233 regulator-min-microvolt = <5000000>;
234 regulator-max-microvolt = <500 234 regulator-max-microvolt = <5000000>;
235 gpio = <&sled1_ioexp 1 GPIO_AC 235 gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
236 enable-active-high; 236 enable-active-high;
237 }; 237 };
238 238
239 vbus_sled2: vbus_sled2 { 239 vbus_sled2: vbus_sled2 {
240 compatible = "regulator-fixed" 240 compatible = "regulator-fixed";
241 regulator-name = "vbus_sled2"; 241 regulator-name = "vbus_sled2";
242 regulator-min-microvolt = <500 242 regulator-min-microvolt = <5000000>;
243 regulator-max-microvolt = <500 243 regulator-max-microvolt = <5000000>;
244 gpio = <&sled2_ioexp 1 GPIO_AC 244 gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
245 enable-active-high; 245 enable-active-high;
246 }; 246 };
247 247
248 vbus_sled3: vbus_sled3 { 248 vbus_sled3: vbus_sled3 {
249 compatible = "regulator-fixed" 249 compatible = "regulator-fixed";
250 regulator-name = "vbus_sled3"; 250 regulator-name = "vbus_sled3";
251 regulator-min-microvolt = <500 251 regulator-min-microvolt = <5000000>;
252 regulator-max-microvolt = <500 252 regulator-max-microvolt = <5000000>;
253 gpio = <&sled3_ioexp 1 GPIO_AC 253 gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
254 enable-active-high; 254 enable-active-high;
255 }; 255 };
256 256
257 vbus_sled4: vbus_sled4 { 257 vbus_sled4: vbus_sled4 {
258 compatible = "regulator-fixed" 258 compatible = "regulator-fixed";
259 regulator-name = "vbus_sled4"; 259 regulator-name = "vbus_sled4";
260 regulator-min-microvolt = <500 260 regulator-min-microvolt = <5000000>;
261 regulator-max-microvolt = <500 261 regulator-max-microvolt = <5000000>;
262 gpio = <&sled4_ioexp 1 GPIO_AC 262 gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
263 enable-active-high; 263 enable-active-high;
264 }; 264 };
265 265
266 vbus_sled5: vbus_sled5 { 266 vbus_sled5: vbus_sled5 {
267 compatible = "regulator-fixed" 267 compatible = "regulator-fixed";
268 regulator-name = "vbus_sled5"; 268 regulator-name = "vbus_sled5";
269 regulator-min-microvolt = <500 269 regulator-min-microvolt = <5000000>;
270 regulator-max-microvolt = <500 270 regulator-max-microvolt = <5000000>;
271 gpio = <&sled5_ioexp 1 GPIO_AC 271 gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
272 enable-active-high; 272 enable-active-high;
273 }; 273 };
274 274
275 vbus_sled6: vbus_sled6 { 275 vbus_sled6: vbus_sled6 {
276 compatible = "regulator-fixed" 276 compatible = "regulator-fixed";
277 regulator-name = "vbus_sled6"; 277 regulator-name = "vbus_sled6";
278 regulator-min-microvolt = <500 278 regulator-min-microvolt = <5000000>;
279 regulator-max-microvolt = <500 279 regulator-max-microvolt = <5000000>;
280 gpio = <&sled6_ioexp 1 GPIO_AC 280 gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
281 enable-active-high; 281 enable-active-high;
282 }; 282 };
283 }; 283 };
284 284
285 &mac2 { 285 &mac2 {
286 status = "okay"; 286 status = "okay";
287 phy-mode = "rgmii"; 287 phy-mode = "rgmii";
288 phy-handle = <&switchphy>; 288 phy-handle = <&switchphy>;
289 pinctrl-names = "default"; 289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_rgmii3_default>; 290 pinctrl-0 = <&pinctrl_rgmii3_default>;
291 291
292 fixed-link { 292 fixed-link {
293 speed = <1000>; 293 speed = <1000>;
294 full-duplex; 294 full-duplex;
295 }; 295 };
296 }; 296 };
297 297
298 &fmc { 298 &fmc {
299 status = "okay"; 299 status = "okay";
300 flash@0 { 300 flash@0 {
301 status = "okay"; 301 status = "okay";
302 m25p,fast-read; 302 m25p,fast-read;
303 label = "bmc"; 303 label = "bmc";
304 spi-max-frequency = <50000000> 304 spi-max-frequency = <50000000>;
305 #include "openbmc-flash-layout-128.dtsi" 305 #include "openbmc-flash-layout-128.dtsi"
306 }; 306 };
307 flash@1 { 307 flash@1 {
308 status = "okay"; 308 status = "okay";
309 m25p,fast-read; 309 m25p,fast-read;
310 label = "alt-bmc"; 310 label = "alt-bmc";
311 spi-max-frequency = <50000000> 311 spi-max-frequency = <50000000>;
312 }; 312 };
313 }; 313 };
314 314
315 &spi2 { 315 &spi2 {
316 status = "okay"; 316 status = "okay";
317 pinctrl-names = "default"; 317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_spi2_default>; 318 pinctrl-0 = <&pinctrl_spi2_default>;
319 319
320 flash@0 { 320 flash@0 {
321 status = "okay"; 321 status = "okay";
322 m25p,fast-read; 322 m25p,fast-read;
323 label = "pnor"; 323 label = "pnor";
324 spi-max-frequency = <50000000> 324 spi-max-frequency = <50000000>;
325 }; 325 };
326 }; 326 };
327 327
328 &i2c0 { 328 &i2c0 {
329 status = "okay"; 329 status = "okay";
330 ina230@45 { 330 ina230@45 {
331 compatible = "ti,ina230"; 331 compatible = "ti,ina230";
332 reg = <0x45>; 332 reg = <0x45>;
333 shunt-resistor = <2000>; 333 shunt-resistor = <2000>;
334 }; 334 };
335 335
336 mp5023@40 { 336 mp5023@40 {
337 compatible = "mps,mp5023"; 337 compatible = "mps,mp5023";
338 reg = <0x40>; 338 reg = <0x40>;
339 }; 339 };
340 340
341 tmp421@4f { 341 tmp421@4f {
342 compatible = "ti,tmp421"; 342 compatible = "ti,tmp421";
343 reg = <0x4f>; 343 reg = <0x4f>;
344 }; 344 };
345 345
346 sled1_ioexp41: pca9536@41 { 346 sled1_ioexp41: pca9536@41 {
347 compatible = "nxp,pca9536"; 347 compatible = "nxp,pca9536";
348 reg = <0x41>; 348 reg = <0x41>;
349 gpio-controller; 349 gpio-controller;
350 #gpio-cells = <2>; 350 #gpio-cells = <2>;
351 351
352 gpio-line-names = 352 gpio-line-names =
353 "SLED1_SWD_MUX", "SLED1_XRES_S 353 "SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
354 "SLED1_CLKREQ_N", "SLED1_PCIE_ 354 "SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
355 }; 355 };
356 356
357 sled1_ioexp: pca9539@76 { 357 sled1_ioexp: pca9539@76 {
358 compatible = "nxp,pca9539"; 358 compatible = "nxp,pca9539";
359 reg = <0x76>; 359 reg = <0x76>;
360 #address-cells = <1>; 360 #address-cells = <1>;
361 #size-cells = <0>; 361 #size-cells = <0>;
362 gpio-controller; 362 gpio-controller;
363 #gpio-cells = <2>; 363 #gpio-cells = <2>;
364 364
365 interrupt-parent = <&gpio0>; 365 interrupt-parent = <&gpio0>;
366 interrupts = <ASPEED_GPIO(M, 0 366 interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
367 367
368 gpio-line-names = 368 gpio-line-names =
369 "SLED1_MS_DETECT1","SLED1_VBUS 369 "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
370 "SLED1_SSD_ALERT","SLED1_MS_DE 370 "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
371 "SLED1_MD_STBY_RESET","SLED1_M 371 "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
372 "SLED1_MD_MODE1","SLED1_MD_MOD 372 "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
373 }; 373 };
374 374
375 sled1_leds: pca9552@67 { 375 sled1_leds: pca9552@67 {
376 compatible = "nxp,pca9552"; 376 compatible = "nxp,pca9552";
377 reg = <0x67>; 377 reg = <0x67>;
378 #address-cells = <1>; 378 #address-cells = <1>;
379 #size-cells = <0>; 379 #size-cells = <0>;
380 gpio-controller; 380 gpio-controller;
381 #gpio-cells = <2>; 381 #gpio-cells = <2>;
382 382
383 gpio-line-names = 383 gpio-line-names =
384 "led-sled1-amber","led-sled1-b 384 "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
385 "","","","", 385 "","","","",
386 "","","","", 386 "","","","",
387 "","","",""; 387 "","","","";
388 }; 388 };
389 389
390 sled1_fusb302: typec-portc@22 { 390 sled1_fusb302: typec-portc@22 {
391 compatible = "fcs,fusb302"; 391 compatible = "fcs,fusb302";
392 reg = <0x22>; 392 reg = <0x22>;
393 393
394 interrupt-parent = <&gpio0>; 394 interrupt-parent = <&gpio0>;
395 interrupts = <ASPEED_GPIO(B, 0 395 interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
396 vbus-supply = <&vbus_sled1>; 396 vbus-supply = <&vbus_sled1>;
397 397
398 connector { 398 connector {
399 compatible = "usb-c-co 399 compatible = "usb-c-connector";
400 label = "USB-C"; 400 label = "USB-C";
401 power-role = "source"; 401 power-role = "source";
402 data-role = "host"; 402 data-role = "host";
403 pd-disable; 403 pd-disable;
404 typec-power-opmode = " 404 typec-power-opmode = "default";
405 }; 405 };
406 }; 406 };
407 407
408 eeprom@54 { 408 eeprom@54 {
409 compatible = "atmel,24c64"; 409 compatible = "atmel,24c64";
410 reg = <0x54>; 410 reg = <0x54>;
411 }; 411 };
412 }; 412 };
413 413
414 &i2c1 { 414 &i2c1 {
415 status = "okay"; 415 status = "okay";
416 ina230@45 { 416 ina230@45 {
417 compatible = "ti,ina230"; 417 compatible = "ti,ina230";
418 reg = <0x45>; 418 reg = <0x45>;
419 shunt-resistor = <2000>; 419 shunt-resistor = <2000>;
420 }; 420 };
421 421
422 mp5023@40 { 422 mp5023@40 {
423 compatible = "mps,mp5023"; 423 compatible = "mps,mp5023";
424 reg = <0x40>; 424 reg = <0x40>;
425 }; 425 };
426 426
427 tmp421@4f { 427 tmp421@4f {
428 compatible = "ti,tmp421"; 428 compatible = "ti,tmp421";
429 reg = <0x4f>; 429 reg = <0x4f>;
430 }; 430 };
431 431
432 sled2_ioexp41: pca9536@41 { 432 sled2_ioexp41: pca9536@41 {
433 compatible = "nxp,pca9536"; 433 compatible = "nxp,pca9536";
434 reg = <0x41>; 434 reg = <0x41>;
435 gpio-controller; 435 gpio-controller;
436 #gpio-cells = <2>; 436 #gpio-cells = <2>;
437 437
438 gpio-line-names = 438 gpio-line-names =
439 "SLED2_SWD_MUX", "SLED2_XRES_S 439 "SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
440 "SLED2_CLKREQ_N", "SLED2_PCIE_ 440 "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
441 }; 441 };
442 442
443 sled2_ioexp: pca9539@76 { 443 sled2_ioexp: pca9539@76 {
444 compatible = "nxp,pca9539"; 444 compatible = "nxp,pca9539";
445 reg = <0x76>; 445 reg = <0x76>;
446 #address-cells = <1>; 446 #address-cells = <1>;
447 #size-cells = <0>; 447 #size-cells = <0>;
448 gpio-controller; 448 gpio-controller;
449 #gpio-cells = <2>; 449 #gpio-cells = <2>;
450 450
451 interrupt-parent = <&gpio0>; 451 interrupt-parent = <&gpio0>;
452 interrupts = <ASPEED_GPIO(M, 1 452 interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
453 453
454 gpio-line-names = 454 gpio-line-names =
455 "SLED2_MS_DETECT1","SLED2_VBUS 455 "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
456 "SLED2_SSD_ALERT","SLED2_MS_DE 456 "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
457 "SLED2_MD_STBY_RESET","SLED2_M 457 "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
458 "SLED2_MD_MODE1","SLED2_MD_MOD 458 "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
459 }; 459 };
460 460
461 sled2_leds: pca9552@67 { 461 sled2_leds: pca9552@67 {
462 compatible = "nxp,pca9552"; 462 compatible = "nxp,pca9552";
463 reg = <0x67>; 463 reg = <0x67>;
464 #address-cells = <1>; 464 #address-cells = <1>;
465 #size-cells = <0>; 465 #size-cells = <0>;
466 gpio-controller; 466 gpio-controller;
467 #gpio-cells = <2>; 467 #gpio-cells = <2>;
468 468
469 gpio-line-names = 469 gpio-line-names =
470 "led-sled2-amber","led-sled2-b 470 "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
471 "","","","", 471 "","","","",
472 "","","","", 472 "","","","",
473 "","","",""; 473 "","","","";
474 }; 474 };
475 475
476 sled2_fusb302: typec-portc@22 { 476 sled2_fusb302: typec-portc@22 {
477 compatible = "fcs,fusb302"; 477 compatible = "fcs,fusb302";
478 reg = <0x22>; 478 reg = <0x22>;
479 479
480 interrupt-parent = <&gpio0>; 480 interrupt-parent = <&gpio0>;
481 interrupts = <ASPEED_GPIO(B, 1 481 interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
482 vbus-supply = <&vbus_sled2>; 482 vbus-supply = <&vbus_sled2>;
483 483
484 connector { 484 connector {
485 compatible = "usb-c-co 485 compatible = "usb-c-connector";
486 label = "USB-C"; 486 label = "USB-C";
487 power-role = "source"; 487 power-role = "source";
488 data-role = "host"; 488 data-role = "host";
489 pd-disable; 489 pd-disable;
490 typec-power-opmode = " 490 typec-power-opmode = "default";
491 }; 491 };
492 }; 492 };
493 493
494 eeprom@54 { 494 eeprom@54 {
495 compatible = "atmel,24c64"; 495 compatible = "atmel,24c64";
496 reg = <0x54>; 496 reg = <0x54>;
497 }; 497 };
498 }; 498 };
499 499
500 &i2c2 { 500 &i2c2 {
501 status = "okay"; 501 status = "okay";
502 ina230@45 { 502 ina230@45 {
503 compatible = "ti,ina230"; 503 compatible = "ti,ina230";
504 reg = <0x45>; 504 reg = <0x45>;
505 shunt-resistor = <2000>; 505 shunt-resistor = <2000>;
506 }; 506 };
507 507
508 mp5023@40 { 508 mp5023@40 {
509 compatible = "mps,mp5023"; 509 compatible = "mps,mp5023";
510 reg = <0x40>; 510 reg = <0x40>;
511 }; 511 };
512 512
513 tmp421@4f { 513 tmp421@4f {
514 compatible = "ti,tmp421"; 514 compatible = "ti,tmp421";
515 reg = <0x4f>; 515 reg = <0x4f>;
516 }; 516 };
517 517
518 sled3_ioexp41: pca9536@41 { 518 sled3_ioexp41: pca9536@41 {
519 compatible = "nxp,pca9536"; 519 compatible = "nxp,pca9536";
520 reg = <0x41>; 520 reg = <0x41>;
521 gpio-controller; 521 gpio-controller;
522 #gpio-cells = <2>; 522 #gpio-cells = <2>;
523 523
524 gpio-line-names = 524 gpio-line-names =
525 "SLED3_SWD_MUX", "SLED3_XRES_S 525 "SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
526 "SLED3_CLKREQ_N", "SLED3_PCIE_ 526 "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
527 }; 527 };
528 528
529 sled3_ioexp: pca9539@76 { 529 sled3_ioexp: pca9539@76 {
530 compatible = "nxp,pca9539"; 530 compatible = "nxp,pca9539";
531 reg = <0x76>; 531 reg = <0x76>;
532 #address-cells = <1>; 532 #address-cells = <1>;
533 #size-cells = <0>; 533 #size-cells = <0>;
534 gpio-controller; 534 gpio-controller;
535 #gpio-cells = <2>; 535 #gpio-cells = <2>;
536 536
537 interrupt-parent = <&gpio0>; 537 interrupt-parent = <&gpio0>;
538 interrupts = <ASPEED_GPIO(M, 2 538 interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
539 539
540 gpio-line-names = 540 gpio-line-names =
541 "SLED3_MS_DETECT1","SLED3_VBUS 541 "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
542 "SLED3_SSD_ALERT","SLED3_MS_DE 542 "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
543 "SLED3_MD_STBY_RESET","SLED3_M 543 "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
544 "SLED3_MD_MODE1","SLED3_MD_MOD 544 "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
545 }; 545 };
546 546
547 sled3_leds: pca9552@67 { 547 sled3_leds: pca9552@67 {
548 compatible = "nxp,pca9552"; 548 compatible = "nxp,pca9552";
549 reg = <0x67>; 549 reg = <0x67>;
550 #address-cells = <1>; 550 #address-cells = <1>;
551 #size-cells = <0>; 551 #size-cells = <0>;
552 gpio-controller; 552 gpio-controller;
553 #gpio-cells = <2>; 553 #gpio-cells = <2>;
554 554
555 gpio-line-names = 555 gpio-line-names =
556 "led-sled3-amber","led-sled3-b 556 "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
557 "","","","", 557 "","","","",
558 "","","","", 558 "","","","",
559 "","","",""; 559 "","","","";
560 }; 560 };
561 561
562 sled3_fusb302: typec-portc@22 { 562 sled3_fusb302: typec-portc@22 {
563 compatible = "fcs,fusb302"; 563 compatible = "fcs,fusb302";
564 reg = <0x22>; 564 reg = <0x22>;
565 565
566 interrupt-parent = <&gpio0>; 566 interrupt-parent = <&gpio0>;
567 interrupts = <ASPEED_GPIO(B, 7 567 interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
568 vbus-supply = <&vbus_sled3>; 568 vbus-supply = <&vbus_sled3>;
569 569
570 connector { 570 connector {
571 compatible = "usb-c-co 571 compatible = "usb-c-connector";
572 label = "USB-C"; 572 label = "USB-C";
573 power-role = "source"; 573 power-role = "source";
574 data-role = "host"; 574 data-role = "host";
575 pd-disable; 575 pd-disable;
576 typec-power-opmode = " 576 typec-power-opmode = "default";
577 }; 577 };
578 }; 578 };
579 579
580 eeprom@54 { 580 eeprom@54 {
581 compatible = "atmel,24c64"; 581 compatible = "atmel,24c64";
582 reg = <0x54>; 582 reg = <0x54>;
583 }; 583 };
584 }; 584 };
585 585
586 &i2c3 { 586 &i2c3 {
587 status = "okay"; 587 status = "okay";
588 ina230@45 { 588 ina230@45 {
589 compatible = "ti,ina230"; 589 compatible = "ti,ina230";
590 reg = <0x45>; 590 reg = <0x45>;
591 shunt-resistor = <2000>; 591 shunt-resistor = <2000>;
592 }; 592 };
593 593
594 mp5023@40 { 594 mp5023@40 {
595 compatible = "mps,mp5023"; 595 compatible = "mps,mp5023";
596 reg = <0x40>; 596 reg = <0x40>;
597 }; 597 };
598 598
599 tmp421@4f { 599 tmp421@4f {
600 compatible = "ti,tmp421"; 600 compatible = "ti,tmp421";
601 reg = <0x4f>; 601 reg = <0x4f>;
602 }; 602 };
603 603
604 sled4_ioexp41: pca9536@41 { 604 sled4_ioexp41: pca9536@41 {
605 compatible = "nxp,pca9536"; 605 compatible = "nxp,pca9536";
606 reg = <0x41>; 606 reg = <0x41>;
607 gpio-controller; 607 gpio-controller;
608 #gpio-cells = <2>; 608 #gpio-cells = <2>;
609 609
610 gpio-line-names = 610 gpio-line-names =
611 "SLED4_SWD_MUX", "SLED4_XRES_S 611 "SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
612 "SLED4_CLKREQ_N", "SLED4_PCIE_ 612 "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
613 }; 613 };
614 614
615 sled4_ioexp: pca9539@76 { 615 sled4_ioexp: pca9539@76 {
616 compatible = "nxp,pca9539"; 616 compatible = "nxp,pca9539";
617 reg = <0x76>; 617 reg = <0x76>;
618 #address-cells = <1>; 618 #address-cells = <1>;
619 #size-cells = <0>; 619 #size-cells = <0>;
620 gpio-controller; 620 gpio-controller;
621 #gpio-cells = <2>; 621 #gpio-cells = <2>;
622 622
623 interrupt-parent = <&gpio0>; 623 interrupt-parent = <&gpio0>;
624 interrupts = <ASPEED_GPIO(M, 3 624 interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
625 625
626 gpio-line-names = 626 gpio-line-names =
627 "SLED4_MS_DETECT1","SLED4_VBUS 627 "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
628 "SLED4_SSD_ALERT","SLED4_MS_DE 628 "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
629 "SLED4_MD_STBY_RESET","SLED4_M 629 "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
630 "SLED4_MD_MODE1","SLED4_MD_MOD 630 "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
631 }; 631 };
632 632
633 sled4_leds: pca9552@67 { 633 sled4_leds: pca9552@67 {
634 compatible = "nxp,pca9552"; 634 compatible = "nxp,pca9552";
635 reg = <0x67>; 635 reg = <0x67>;
636 #address-cells = <1>; 636 #address-cells = <1>;
637 #size-cells = <0>; 637 #size-cells = <0>;
638 gpio-controller; 638 gpio-controller;
639 #gpio-cells = <2>; 639 #gpio-cells = <2>;
640 640
641 gpio-line-names = 641 gpio-line-names =
642 "led-sled4-amber","led-sled4-b 642 "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
643 "","","","", 643 "","","","",
644 "","","","", 644 "","","","",
645 "","","",""; 645 "","","","";
646 }; 646 };
647 647
648 sled4_fusb302: typec-portc@22 { 648 sled4_fusb302: typec-portc@22 {
649 compatible = "fcs,fusb302"; 649 compatible = "fcs,fusb302";
650 reg = <0x22>; 650 reg = <0x22>;
651 651
652 interrupt-parent = <&gpio0>; 652 interrupt-parent = <&gpio0>;
653 interrupts = <ASPEED_GPIO(S, 7 653 interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
654 vbus-supply = <&vbus_sled4>; 654 vbus-supply = <&vbus_sled4>;
655 655
656 connector { 656 connector {
657 compatible = "usb-c-co 657 compatible = "usb-c-connector";
658 label = "USB-C"; 658 label = "USB-C";
659 power-role = "source"; 659 power-role = "source";
660 data-role = "host"; 660 data-role = "host";
661 pd-disable; 661 pd-disable;
662 typec-power-opmode = " 662 typec-power-opmode = "default";
663 }; 663 };
664 }; 664 };
665 665
666 eeprom@54 { 666 eeprom@54 {
667 compatible = "atmel,24c64"; 667 compatible = "atmel,24c64";
668 reg = <0x54>; 668 reg = <0x54>;
669 }; 669 };
670 }; 670 };
671 671
672 &i2c4 { 672 &i2c4 {
673 status = "okay"; 673 status = "okay";
674 ina230@45 { 674 ina230@45 {
675 compatible = "ti,ina230"; 675 compatible = "ti,ina230";
676 reg = <0x45>; 676 reg = <0x45>;
677 shunt-resistor = <2000>; 677 shunt-resistor = <2000>;
678 }; 678 };
679 679
680 mp5023@40 { 680 mp5023@40 {
681 compatible = "mps,mp5023"; 681 compatible = "mps,mp5023";
682 reg = <0x40>; 682 reg = <0x40>;
683 }; 683 };
684 684
685 tmp421@4f { 685 tmp421@4f {
686 compatible = "ti,tmp421"; 686 compatible = "ti,tmp421";
687 reg = <0x4f>; 687 reg = <0x4f>;
688 }; 688 };
689 689
690 sled5_ioexp41: pca9536@41 { 690 sled5_ioexp41: pca9536@41 {
691 compatible = "nxp,pca9536"; 691 compatible = "nxp,pca9536";
692 reg = <0x41>; 692 reg = <0x41>;
693 gpio-controller; 693 gpio-controller;
694 #gpio-cells = <2>; 694 #gpio-cells = <2>;
695 695
696 gpio-line-names = 696 gpio-line-names =
697 "SLED5_SWD_MUX", "SLED5_XRES_S 697 "SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
698 "SLED5_CLKREQ_N", "SLED5_PCIE_ 698 "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
699 }; 699 };
700 700
701 sled5_ioexp: pca9539@76 { 701 sled5_ioexp: pca9539@76 {
702 compatible = "nxp,pca9539"; 702 compatible = "nxp,pca9539";
703 reg = <0x76>; 703 reg = <0x76>;
704 #address-cells = <1>; 704 #address-cells = <1>;
705 #size-cells = <0>; 705 #size-cells = <0>;
706 gpio-controller; 706 gpio-controller;
707 #gpio-cells = <2>; 707 #gpio-cells = <2>;
708 708
709 interrupt-parent = <&gpio0>; 709 interrupt-parent = <&gpio0>;
710 interrupts = <ASPEED_GPIO(M, 4 710 interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
711 711
712 gpio-line-names = 712 gpio-line-names =
713 "SLED5_MS_DETECT1","SLED5_VBUS 713 "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
714 "SLED5_SSD_ALERT","SLED5_MS_DE 714 "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
715 "SLED5_MD_STBY_RESET","SLED5_M 715 "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
716 "SLED5_MD_MODE1","SLED5_MD_MOD 716 "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
717 }; 717 };
718 718
719 sled5_leds: pca9552@67 { 719 sled5_leds: pca9552@67 {
720 compatible = "nxp,pca9552"; 720 compatible = "nxp,pca9552";
721 reg = <0x67>; 721 reg = <0x67>;
722 #address-cells = <1>; 722 #address-cells = <1>;
723 #size-cells = <0>; 723 #size-cells = <0>;
724 gpio-controller; 724 gpio-controller;
725 #gpio-cells = <2>; 725 #gpio-cells = <2>;
726 726
727 gpio-line-names = 727 gpio-line-names =
728 "led-sled5-amber","led-sled5-b 728 "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
729 "","","","", 729 "","","","",
730 "","","","", 730 "","","","",
731 "","","",""; 731 "","","","";
732 }; 732 };
733 733
734 sled5_fusb302: typec-portc@22 { 734 sled5_fusb302: typec-portc@22 {
735 compatible = "fcs,fusb302"; 735 compatible = "fcs,fusb302";
736 reg = <0x22>; 736 reg = <0x22>;
737 737
738 interrupt-parent = <&gpio0>; 738 interrupt-parent = <&gpio0>;
739 interrupts = <ASPEED_GPIO(Y, 3 739 interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
740 vbus-supply = <&vbus_sled5>; 740 vbus-supply = <&vbus_sled5>;
741 741
742 connector { 742 connector {
743 compatible = "usb-c-co 743 compatible = "usb-c-connector";
744 label = "USB-C"; 744 label = "USB-C";
745 power-role = "source"; 745 power-role = "source";
746 data-role = "host"; 746 data-role = "host";
747 pd-disable; 747 pd-disable;
748 typec-power-opmode = " 748 typec-power-opmode = "default";
749 }; 749 };
750 }; 750 };
751 751
752 eeprom@54 { 752 eeprom@54 {
753 compatible = "atmel,24c64"; 753 compatible = "atmel,24c64";
754 reg = <0x54>; 754 reg = <0x54>;
755 }; 755 };
756 }; 756 };
757 757
758 &i2c5 { 758 &i2c5 {
759 status = "okay"; 759 status = "okay";
760 ina230@45 { 760 ina230@45 {
761 compatible = "ti,ina230"; 761 compatible = "ti,ina230";
762 reg = <0x45>; 762 reg = <0x45>;
763 shunt-resistor = <2000>; 763 shunt-resistor = <2000>;
764 }; 764 };
765 765
766 mp5023@40 { 766 mp5023@40 {
767 compatible = "mps,mp5023"; 767 compatible = "mps,mp5023";
768 reg = <0x40>; 768 reg = <0x40>;
769 }; 769 };
770 770
771 tmp421@4f { 771 tmp421@4f {
772 compatible = "ti,tmp421"; 772 compatible = "ti,tmp421";
773 reg = <0x4f>; 773 reg = <0x4f>;
774 }; 774 };
775 775
776 sled6_ioexp41: pca9536@41 { 776 sled6_ioexp41: pca9536@41 {
777 compatible = "nxp,pca9536"; 777 compatible = "nxp,pca9536";
778 reg = <0x41>; 778 reg = <0x41>;
779 gpio-controller; 779 gpio-controller;
780 #gpio-cells = <2>; 780 #gpio-cells = <2>;
781 781
782 gpio-line-names = 782 gpio-line-names =
783 "SLED6_SWD_MUX", "SLED6_XRES_S 783 "SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
784 "SLED6_CLKREQ_N", "SLED6_PCIE_ 784 "SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
785 }; 785 };
786 786
787 sled6_ioexp: pca9539@76 { 787 sled6_ioexp: pca9539@76 {
788 compatible = "nxp,pca9539"; 788 compatible = "nxp,pca9539";
789 reg = <0x76>; 789 reg = <0x76>;
790 #address-cells = <1>; 790 #address-cells = <1>;
791 #size-cells = <0>; 791 #size-cells = <0>;
792 gpio-controller; 792 gpio-controller;
793 #gpio-cells = <2>; 793 #gpio-cells = <2>;
794 794
795 interrupt-parent = <&gpio0>; 795 interrupt-parent = <&gpio0>;
796 interrupts = <ASPEED_GPIO(M, 5 796 interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
797 797
798 gpio-line-names = 798 gpio-line-names =
799 "SLED6_MS_DETECT1","SLED6_VBUS 799 "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
800 "SLED6_SSD_ALERT","SLED6_MS_DE 800 "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
801 "SLED6_MD_STBY_RESET","SLED6_M 801 "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
802 "SLED6_MD_MODE1","SLED6_MD_MOD 802 "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
803 }; 803 };
804 804
805 sled6_leds: pca9552@67 { 805 sled6_leds: pca9552@67 {
806 compatible = "nxp,pca9552"; 806 compatible = "nxp,pca9552";
807 reg = <0x67>; 807 reg = <0x67>;
808 #address-cells = <1>; 808 #address-cells = <1>;
809 #size-cells = <0>; 809 #size-cells = <0>;
810 gpio-controller; 810 gpio-controller;
811 #gpio-cells = <2>; 811 #gpio-cells = <2>;
812 812
813 gpio-line-names = 813 gpio-line-names =
814 "led-sled6-amber","led-sled6-b 814 "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
815 "","","","", 815 "","","","",
816 "","","","", 816 "","","","",
817 "","","",""; 817 "","","","";
818 }; 818 };
819 819
820 sled6_fusb302: typec-portc@22 { 820 sled6_fusb302: typec-portc@22 {
821 compatible = "fcs,fusb302"; 821 compatible = "fcs,fusb302";
822 reg = <0x22>; 822 reg = <0x22>;
823 823
824 interrupt-parent = <&gpio0>; 824 interrupt-parent = <&gpio0>;
825 interrupts = <ASPEED_GPIO(I, 7 825 interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
826 vbus-supply = <&vbus_sled6>; 826 vbus-supply = <&vbus_sled6>;
827 827
828 connector { 828 connector {
829 compatible = "usb-c-co 829 compatible = "usb-c-connector";
830 label = "USB-C"; 830 label = "USB-C";
831 power-role = "source"; 831 power-role = "source";
832 data-role = "host"; 832 data-role = "host";
833 pd-disable; 833 pd-disable;
834 typec-power-opmode = " 834 typec-power-opmode = "default";
835 }; 835 };
836 }; 836 };
837 837
838 eeprom@54 { 838 eeprom@54 {
839 compatible = "atmel,24c64"; 839 compatible = "atmel,24c64";
840 reg = <0x54>; 840 reg = <0x54>;
841 }; 841 };
842 }; 842 };
843 843
844 &i2c6 { 844 &i2c6 {
845 status = "okay"; 845 status = "okay";
846 846
847 eeprom@56 { 847 eeprom@56 {
848 compatible = "atmel,24c64"; 848 compatible = "atmel,24c64";
849 reg = <0x56>; 849 reg = <0x56>;
850 }; 850 };
851 851
852 rtc@51 { 852 rtc@51 {
853 /* in-chip rtc disabled, use e 853 /* in-chip rtc disabled, use external rtc (battery-backed) */
854 compatible = "nxp,pcf85263"; 854 compatible = "nxp,pcf85263";
855 reg = <0x51>; 855 reg = <0x51>;
856 }; 856 };
857 }; 857 };
858 858
859 &i2c7 { 859 &i2c7 {
860 status = "okay"; 860 status = "okay";
861 861
862 eeprom@54 { 862 eeprom@54 {
863 compatible = "atmel,24c64"; 863 compatible = "atmel,24c64";
864 reg = <0x54>; 864 reg = <0x54>;
865 }; 865 };
866 }; 866 };
867 867
868 &i2c9 { 868 &i2c9 {
869 status = "okay"; 869 status = "okay";
870 870
871 tmp421@4f { 871 tmp421@4f {
872 compatible = "ti,tmp421"; 872 compatible = "ti,tmp421";
873 reg = <0x4f>; 873 reg = <0x4f>;
874 }; 874 };
875 }; 875 };
876 876
877 &i2c10 { 877 &i2c10 {
878 status = "okay"; 878 status = "okay";
879 879
880 tmp421@4f { 880 tmp421@4f {
881 compatible = "ti,tmp421"; 881 compatible = "ti,tmp421";
882 reg = <0x4f>; 882 reg = <0x4f>;
883 }; 883 };
884 884
885 front_leds: pca9552@67 { 885 front_leds: pca9552@67 {
886 compatible = "nxp,pca9552"; 886 compatible = "nxp,pca9552";
887 reg = <0x67>; 887 reg = <0x67>;
888 #address-cells = <1>; 888 #address-cells = <1>;
889 #size-cells = <0>; 889 #size-cells = <0>;
890 gpio-controller; 890 gpio-controller;
891 #gpio-cells = <2>; 891 #gpio-cells = <2>;
892 892
893 gpio-line-names = 893 gpio-line-names =
894 "led-fault-identify","power-p5 894 "led-fault-identify","power-p5v-stby-good",
895 "power-p1v0-dvdd-good","power- 895 "power-p1v0-dvdd-good","power-p1v0-avdd-good",
896 "","","","", 896 "","","","",
897 "","","","", 897 "","","","",
898 "","","",""; 898 "","","","";
899 }; 899 };
900 }; 900 };
901 901
902 &i2c12 { 902 &i2c12 {
903 status = "okay"; 903 status = "okay";
904 904
905 adm1278@11 { 905 adm1278@11 {
906 compatible = "adi,adm1278"; 906 compatible = "adi,adm1278";
907 reg = <0x11>; 907 reg = <0x11>;
908 shunt-resistor-micro-ohms = <3 908 shunt-resistor-micro-ohms = <300>;
909 adi,volt-curr-sample-average = 909 adi,volt-curr-sample-average = <128>;
910 adi,power-sample-average = <12 910 adi,power-sample-average = <128>;
911 }; 911 };
912 912
913 tmp421@4c { 913 tmp421@4c {
914 compatible = "ti,tmp421"; 914 compatible = "ti,tmp421";
915 reg = <0x4c>; 915 reg = <0x4c>;
916 }; 916 };
917 917
918 tmp421@4d { 918 tmp421@4d {
919 compatible = "ti,tmp421"; 919 compatible = "ti,tmp421";
920 reg = <0x4d>; 920 reg = <0x4d>;
921 }; 921 };
922 922
923 fan_leds: pca9552@67 { 923 fan_leds: pca9552@67 {
924 compatible = "nxp,pca9552"; 924 compatible = "nxp,pca9552";
925 reg = <0x67>; 925 reg = <0x67>;
926 #address-cells = <1>; 926 #address-cells = <1>;
927 #size-cells = <0>; 927 #size-cells = <0>;
928 gpio-controller; 928 gpio-controller;
929 #gpio-cells = <2>; 929 #gpio-cells = <2>;
930 930
931 gpio-line-names = 931 gpio-line-names =
932 "presence-fan0","presence-fan1 932 "presence-fan0","presence-fan1",
933 "presence-fan2","presence-fan3 933 "presence-fan2","presence-fan3",
934 "power-fan0-good","power-fan1- 934 "power-fan0-good","power-fan1-good",
935 "power-fan2-good","power-fan3- 935 "power-fan2-good","power-fan3-good",
936 "","","","", 936 "","","","",
937 "","","",""; 937 "","","","";
938 }; 938 };
939 }; 939 };
940 940
941 &i2c13 { 941 &i2c13 {
942 multi-master; 942 multi-master;
943 aspeed,hw-timeout-ms = <1000>; 943 aspeed,hw-timeout-ms = <1000>;
944 status = "okay"; 944 status = "okay";
945 945
946 //USB Debug Connector 946 //USB Debug Connector
947 ipmb13@10 { 947 ipmb13@10 {
948 compatible = "ipmb-dev"; 948 compatible = "ipmb-dev";
949 reg = <(0x10 | I2C_OWN_SLAVE_A 949 reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
950 i2c-protocol; 950 i2c-protocol;
951 }; 951 };
952 }; 952 };
953 953
954 &gpio0 { 954 &gpio0 {
955 pinctrl-names = "default"; 955 pinctrl-names = "default";
956 pinctrl-0 = <&pinctrl_gpiov2_unbiased_ 956 pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
957 957
958 gpio-line-names = 958 gpio-line-names =
959 /*A0-A7*/ "","","","","","",""," 959 /*A0-A7*/ "","","","","","","","",
960 /*B0-B7*/ "FUSB302_SLED1_INT_N", 960 /*B0-B7*/ "FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
961 "SEL_SPI2_MUX","SPI2_M 961 "SEL_SPI2_MUX","SPI2_MUX1",
962 "SPI2_MUX2","SPI2_MUX3 962 "SPI2_MUX2","SPI2_MUX3",
963 "","FUSB302_SLED3_INT_ 963 "","FUSB302_SLED3_INT_N",
964 /*C0-C7*/ "","","","","","",""," 964 /*C0-C7*/ "","","","","","","","",
965 /*D0-D7*/ "","","","","","",""," 965 /*D0-D7*/ "","","","","","","","",
966 /*E0-E7*/ "","","","","","",""," 966 /*E0-E7*/ "","","","","","","","",
967 /*F0-F7*/ "BMC_SLED1_STCK","BMC_ 967 /*F0-F7*/ "BMC_SLED1_STCK","BMC_SLED2_STCK",
968 "BMC_SLED3_STCK","BMC_ 968 "BMC_SLED3_STCK","BMC_SLED4_STCK",
969 "BMC_SLED5_STCK","BMC_ 969 "BMC_SLED5_STCK","BMC_SLED6_STCK",
970 "","", 970 "","",
971 /*G0-G7*/ "BSM_FRU_WP","SWITCH_F 971 /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
972 "PWRGD_P1V05_VDDCORE", 972 "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
973 /*H0-H7*/ "presence-riser1","pre 973 /*H0-H7*/ "presence-riser1","presence-riser2",
974 "presence-sled1","pres 974 "presence-sled1","presence-sled2",
975 "presence-sled3","pres 975 "presence-sled3","presence-sled4",
976 "presence-sled5","pres 976 "presence-sled5","presence-sled6",
977 /*I0-I7*/ "REV_ID0","", 977 /*I0-I7*/ "REV_ID0","",
978 "REV_ID1","REV_ID2", 978 "REV_ID1","REV_ID2",
979 "","BSM_FLASH_WP_STATU 979 "","BSM_FLASH_WP_STATUS",
980 "BMC_TPM_PRES_N","FUSB 980 "BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
981 /*J0-J7*/ "","","","","","",""," 981 /*J0-J7*/ "","","","","","","","",
982 /*K0-K7*/ "","","","","","",""," 982 /*K0-K7*/ "","","","","","","","",
983 /*L0-L7*/ "","","","","","BMC_RT 983 /*L0-L7*/ "","","","","","BMC_RTC_INT","","",
984 /*M0-M7*/ "ALERT_SLED1_N","ALERT 984 /*M0-M7*/ "ALERT_SLED1_N","ALERT_SLED2_N",
985 "ALERT_SLED3_N","ALERT 985 "ALERT_SLED3_N","ALERT_SLED4_N",
986 "ALERT_SLED5_N","ALERT 986 "ALERT_SLED5_N","ALERT_SLED6_N",
987 "","USB_DEBUG_PWR_BTN_ 987 "","USB_DEBUG_PWR_BTN_N",
988 /*N0-N7*/ "LED_POSTCODE_0","LED_ 988 /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
989 "LED_POSTCODE_2","LED_ 989 "LED_POSTCODE_2","LED_POSTCODE_3",
990 "LED_POSTCODE_4","LED_ 990 "LED_POSTCODE_4","LED_POSTCODE_5",
991 "LED_POSTCODE_6","LED_ 991 "LED_POSTCODE_6","LED_POSTCODE_7",
992 /*O0-O7*/ "","","","", 992 /*O0-O7*/ "","","","",
993 "","BOARD_ID0","BOARD_ 993 "","BOARD_ID0","BOARD_ID1","BOARD_ID2",
994 /*P0-P7*/ "","","","","","",""," 994 /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT",
995 /*Q0-Q7*/ "","","","","","",""," 995 /*Q0-Q7*/ "","","","","","","","",
996 /*R0-R7*/ "","","","","","",""," 996 /*R0-R7*/ "","","","","","","","",
997 /*S0-S7*/ "","","","BAT_DETECT", 997 /*S0-S7*/ "","","","BAT_DETECT",
998 "BMC_BT_WP0_N","BMC_BT 998 "BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
999 /*T0-T7*/ "","","","","","",""," 999 /*T0-T7*/ "","","","","","","","",
1000 /*U0-U7*/ "","","","","","","", 1000 /*U0-U7*/ "","","","","","","","",
1001 /*V0-V7*/ "PWRGD_CNS_PSU","RST_ 1001 /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL_N",
1002 "P12V_AUX_ALERT1_N"," 1002 "P12V_AUX_ALERT1_N","PSU_PRSNT",
1003 "USB2_SEL0_A","USB2_S 1003 "USB2_SEL0_A","USB2_SEL1_A",
1004 "USB2_SEL0_B","USB2_S 1004 "USB2_SEL0_B","USB2_SEL1_B",
1005 /*W0-W7*/ "RST_FRONT_IOEXP_N"," 1005 /*W0-W7*/ "RST_FRONT_IOEXP_N","","","","","","","",
1006 /*X0-X7*/ "","","","","","","", 1006 /*X0-X7*/ "","","","","","","","",
1007 /*Y0-Y7*/ "BMC_SELF_HW_RST","BS 1007 /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT_N",
1008 "BSM_FLASH_LATCH_N"," 1008 "BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
1009 "","","","", 1009 "","","","",
1010 /*Z0-Z7*/ "","","","","","","", 1010 /*Z0-Z7*/ "","","","","","","","";
1011 }; 1011 };
1012 1012
1013 &adc0 { 1013 &adc0 {
1014 vref = <1800>; 1014 vref = <1800>;
1015 status = "okay"; 1015 status = "okay";
1016 1016
1017 pinctrl-names = "default"; 1017 pinctrl-names = "default";
1018 pinctrl-0 = <&pinctrl_adc0_default &p 1018 pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
1019 &pinctrl_adc2_default &pinctr 1019 &pinctrl_adc2_default &pinctrl_adc3_default
1020 &pinctrl_adc4_default &pinctr 1020 &pinctrl_adc4_default &pinctrl_adc5_default
1021 &pinctrl_adc6_default &pinctr 1021 &pinctrl_adc6_default &pinctrl_adc7_default>;
1022 }; 1022 };
1023 1023
1024 &adc1 { 1024 &adc1 {
1025 vref = <2500>; 1025 vref = <2500>;
1026 status = "okay"; 1026 status = "okay";
1027 1027
1028 pinctrl-names = "default"; 1028 pinctrl-names = "default";
1029 pinctrl-0 = <&pinctrl_adc8_default &p 1029 pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
1030 &pinctrl_adc10_default &pinct 1030 &pinctrl_adc10_default &pinctrl_adc11_default
1031 &pinctrl_adc12_default &pinct 1031 &pinctrl_adc12_default &pinctrl_adc13_default
1032 &pinctrl_adc14_default &pinct 1032 &pinctrl_adc14_default &pinctrl_adc15_default>;
1033 }; 1033 };
1034 1034
1035 &mdio0 { 1035 &mdio0 {
1036 status = "okay"; 1036 status = "okay";
1037 /* TODO: Add Marvell 88E6191X */ 1037 /* TODO: Add Marvell 88E6191X */
1038 }; 1038 };
1039 1039
1040 &mdio3 { 1040 &mdio3 {
1041 status = "okay"; 1041 status = "okay";
1042 /* TODO: Add Marvell 88X3310 */ 1042 /* TODO: Add Marvell 88X3310 */
1043 }; 1043 };
1044 1044
1045 &ehci0 { 1045 &ehci0 {
1046 status = "okay"; 1046 status = "okay";
1047 }; 1047 };
1048 1048
1049 &ehci1 { 1049 &ehci1 {
1050 status = "okay"; 1050 status = "okay";
1051 }; 1051 };
1052 1052
1053 &emmc_controller { 1053 &emmc_controller {
1054 status = "okay"; 1054 status = "okay";
1055 }; 1055 };
1056 1056
1057 &emmc { 1057 &emmc {
1058 status = "okay"; 1058 status = "okay";
1059 }; 1059 };
1060 1060
1061 &pinctrl { 1061 &pinctrl {
1062 pinctrl_gpiov2_unbiased_default: gpio 1062 pinctrl_gpiov2_unbiased_default: gpiov2 {
1063 pins = "AD14"; 1063 pins = "AD14";
1064 bias-disable; 1064 bias-disable;
1065 }; 1065 };
1066 }; 1066 };
1067 1067
1068 &wdt1 { 1068 &wdt1 {
1069 status = "okay"; 1069 status = "okay";
1070 pinctrl-names = "default"; 1070 pinctrl-names = "default";
1071 pinctrl-0 = <&pinctrl_wdtrst1_default 1071 pinctrl-0 = <&pinctrl_wdtrst1_default>;
1072 aspeed,reset-type = "soc"; 1072 aspeed,reset-type = "soc";
1073 aspeed,external-signal; 1073 aspeed,external-signal;
1074 aspeed,ext-push-pull; 1074 aspeed,ext-push-pull;
1075 aspeed,ext-active-high; 1075 aspeed,ext-active-high;
1076 aspeed,ext-pulse-duration = <256>; 1076 aspeed,ext-pulse-duration = <256>;
1077 }; 1077 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.