1 // SPDX-License-Identifier: GPL-2.0-or-later
2 // Copyright 2019 IBM Corp.
3
4 #include <dt-bindings/interrupt-controller/arm
5 #include <dt-bindings/interrupt-controller/asp
6 #include <dt-bindings/clock/ast2600-clock.h>
7
8 / {
9 model = "Aspeed BMC";
10 compatible = "aspeed,ast2600";
11 #address-cells = <1>;
12 #size-cells = <1>;
13 interrupt-parent = <&gic>;
14
15 aliases {
16 i2c0 = &i2c0;
17 i2c1 = &i2c1;
18 i2c2 = &i2c2;
19 i2c3 = &i2c3;
20 i2c4 = &i2c4;
21 i2c5 = &i2c5;
22 i2c6 = &i2c6;
23 i2c7 = &i2c7;
24 i2c8 = &i2c8;
25 i2c9 = &i2c9;
26 i2c10 = &i2c10;
27 i2c11 = &i2c11;
28 i2c12 = &i2c12;
29 i2c13 = &i2c13;
30 i2c14 = &i2c14;
31 i2c15 = &i2c15;
32 serial0 = &uart1;
33 serial1 = &uart2;
34 serial2 = &uart3;
35 serial3 = &uart4;
36 serial4 = &uart5;
37 serial5 = &vuart1;
38 serial6 = &vuart2;
39 mdio0 = &mdio0;
40 mdio1 = &mdio1;
41 mdio2 = &mdio2;
42 mdio3 = &mdio3;
43 };
44
45
46 cpus {
47 #address-cells = <1>;
48 #size-cells = <0>;
49 enable-method = "aspeed,ast260
50
51 cpu@f00 {
52 compatible = "arm,cort
53 device_type = "cpu";
54 reg = <0xf00>;
55 };
56
57 cpu@f01 {
58 compatible = "arm,cort
59 device_type = "cpu";
60 reg = <0xf01>;
61 };
62 };
63
64 timer {
65 compatible = "arm,armv7-timer"
66 interrupt-parent = <&gic>;
67 interrupts = <GIC_PPI 13 (GIC_
68 <GIC_PPI 14 (GIC_
69 <GIC_PPI 11 (GIC_
70 <GIC_PPI 10 (GIC_
71 clocks = <&syscon ASPEED_CLK_H
72 arm,cpu-registers-not-fw-confi
73 always-on;
74 };
75
76 edac: sdram@1e6e0000 {
77 compatible = "aspeed,ast2600-s
78 reg = <0x1e6e0000 0x174>;
79 interrupts = <GIC_SPI 0 IRQ_TY
80 };
81
82 ahb {
83 compatible = "simple-bus";
84 #address-cells = <1>;
85 #size-cells = <1>;
86 device_type = "soc";
87 ranges;
88
89 gic: interrupt-controller@4046
90 compatible = "arm,cort
91 interrupts = <GIC_PPI
92 #interrupt-cells = <3>
93 interrupt-controller;
94 interrupt-parent = <&g
95 reg = <0x40461000 0x10
96 <0x40462000 0x1000
97 <0x40464000 0x2000
98 <0x40466000 0x2000
99 };
100
101 ahbc: bus@1e600000 {
102 compatible = "aspeed,a
103 reg = <0x1e600000 0x10
104 };
105
106 fmc: spi@1e620000 {
107 reg = <0x1e620000 0xc4
108 #address-cells = <1>;
109 #size-cells = <0>;
110 compatible = "aspeed,a
111 clocks = <&syscon ASPE
112 status = "disabled";
113 interrupts = <GIC_SPI
114 flash@0 {
115 reg = < 0 >;
116 compatible = "
117 spi-max-freque
118 spi-rx-bus-wid
119 status = "disa
120 };
121 flash@1 {
122 reg = < 1 >;
123 compatible = "
124 spi-max-freque
125 spi-rx-bus-wid
126 status = "disa
127 };
128 flash@2 {
129 reg = < 2 >;
130 compatible = "
131 spi-max-freque
132 spi-rx-bus-wid
133 status = "disa
134 };
135 };
136
137 spi1: spi@1e630000 {
138 reg = <0x1e630000 0xc4
139 #address-cells = <1>;
140 #size-cells = <0>;
141 compatible = "aspeed,a
142 clocks = <&syscon ASPE
143 status = "disabled";
144 flash@0 {
145 reg = < 0 >;
146 compatible = "
147 spi-max-freque
148 spi-rx-bus-wid
149 status = "disa
150 };
151 flash@1 {
152 reg = < 1 >;
153 compatible = "
154 spi-max-freque
155 spi-rx-bus-wid
156 status = "disa
157 };
158 };
159
160 spi2: spi@1e631000 {
161 reg = <0x1e631000 0xc4
162 #address-cells = <1>;
163 #size-cells = <0>;
164 compatible = "aspeed,a
165 clocks = <&syscon ASPE
166 status = "disabled";
167 flash@0 {
168 reg = < 0 >;
169 compatible = "
170 spi-max-freque
171 spi-rx-bus-wid
172 status = "disa
173 };
174 flash@1 {
175 reg = < 1 >;
176 compatible = "
177 spi-max-freque
178 spi-rx-bus-wid
179 status = "disa
180 };
181 flash@2 {
182 reg = < 2 >;
183 compatible = "
184 spi-max-freque
185 spi-rx-bus-wid
186 status = "disa
187 };
188 };
189
190 mdio0: mdio@1e650000 {
191 compatible = "aspeed,a
192 reg = <0x1e650000 0x8>
193 #address-cells = <1>;
194 #size-cells = <0>;
195 status = "disabled";
196 pinctrl-names = "defau
197 pinctrl-0 = <&pinctrl_
198 resets = <&syscon ASPE
199 };
200
201 mdio1: mdio@1e650008 {
202 compatible = "aspeed,a
203 reg = <0x1e650008 0x8>
204 #address-cells = <1>;
205 #size-cells = <0>;
206 status = "disabled";
207 pinctrl-names = "defau
208 pinctrl-0 = <&pinctrl_
209 resets = <&syscon ASPE
210 };
211
212 mdio2: mdio@1e650010 {
213 compatible = "aspeed,a
214 reg = <0x1e650010 0x8>
215 #address-cells = <1>;
216 #size-cells = <0>;
217 status = "disabled";
218 pinctrl-names = "defau
219 pinctrl-0 = <&pinctrl_
220 resets = <&syscon ASPE
221 };
222
223 mdio3: mdio@1e650018 {
224 compatible = "aspeed,a
225 reg = <0x1e650018 0x8>
226 #address-cells = <1>;
227 #size-cells = <0>;
228 status = "disabled";
229 pinctrl-names = "defau
230 pinctrl-0 = <&pinctrl_
231 resets = <&syscon ASPE
232 };
233
234 mac0: ethernet@1e660000 {
235 compatible = "aspeed,a
236 reg = <0x1e660000 0x18
237 interrupts = <GIC_SPI
238 clocks = <&syscon ASPE
239 status = "disabled";
240 };
241
242 mac1: ethernet@1e680000 {
243 compatible = "aspeed,a
244 reg = <0x1e680000 0x18
245 interrupts = <GIC_SPI
246 clocks = <&syscon ASPE
247 status = "disabled";
248 };
249
250 mac2: ethernet@1e670000 {
251 compatible = "aspeed,a
252 reg = <0x1e670000 0x18
253 interrupts = <GIC_SPI
254 clocks = <&syscon ASPE
255 status = "disabled";
256 };
257
258 mac3: ethernet@1e690000 {
259 compatible = "aspeed,a
260 reg = <0x1e690000 0x18
261 interrupts = <GIC_SPI
262 clocks = <&syscon ASPE
263 status = "disabled";
264 };
265
266 ehci0: usb@1e6a1000 {
267 compatible = "aspeed,a
268 reg = <0x1e6a1000 0x10
269 interrupts = <GIC_SPI
270 clocks = <&syscon ASPE
271 pinctrl-names = "defau
272 pinctrl-0 = <&pinctrl_
273 status = "disabled";
274 };
275
276 ehci1: usb@1e6a3000 {
277 compatible = "aspeed,a
278 reg = <0x1e6a3000 0x10
279 interrupts = <GIC_SPI
280 clocks = <&syscon ASPE
281 pinctrl-names = "defau
282 pinctrl-0 = <&pinctrl_
283 status = "disabled";
284 };
285
286 uhci: usb@1e6b0000 {
287 compatible = "aspeed,a
288 reg = <0x1e6b0000 0x10
289 interrupts = <GIC_SPI
290 #ports = <2>;
291 clocks = <&syscon ASPE
292 status = "disabled";
293 /*
294 * No default pinmux,
295 * explicit pinmux ove
296 */
297 };
298
299 vhub: usb-vhub@1e6a0000 {
300 compatible = "aspeed,a
301 reg = <0x1e6a0000 0x35
302 interrupts = <GIC_SPI
303 clocks = <&syscon ASPE
304 aspeed,vhub-downstream
305 aspeed,vhub-generic-en
306 pinctrl-names = "defau
307 pinctrl-0 = <&pinctrl_
308 status = "disabled";
309 };
310
311 udc: usb@1e6a2000 {
312 compatible = "aspeed,a
313 reg = <0x1e6a2000 0x30
314 interrupts = <GIC_SPI
315 clocks = <&syscon ASPE
316 pinctrl-names = "defau
317 pinctrl-0 = <&pinctrl_
318 status = "disabled";
319 };
320
321 apb {
322 compatible = "simple-b
323 #address-cells = <1>;
324 #size-cells = <1>;
325 ranges;
326
327 hace: crypto@1e6d0000
328 compatible = "
329 reg = <0x1e6d0
330 interrupts = <
331 clocks = <&sys
332 resets = <&sys
333 };
334
335 syscon: syscon@1e6e200
336 compatible = "
337 reg = <0x1e6e2
338 ranges = <0 0x
339 #address-cells
340 #size-cells =
341 #clock-cells =
342 #reset-cells =
343
344 pinctrl: pinct
345 compat
346 };
347
348 silicon-id@14
349 compat
350 reg =
351 };
352
353 smp-memram@180
354 compat
355 reg =
356 };
357
358 scu_ic0: inter
359 #inter
360 compat
361 reg =
362 interr
363 interr
364 };
365
366 scu_ic1: inter
367 #inter
368 compat
369 reg =
370 interr
371 interr
372 };
373 };
374
375 rng: hwrng@1e6e2524 {
376 compatible = "
377 reg = <0x1e6e2
378 period = <1>;
379 quality = <100
380 };
381
382 gfx: display@1e6e6000
383 compatible = "
384 reg = <0x1e6e6
385 reg-io-width =
386 clocks = <&sys
387 resets = <&sys
388 syscon = <&sys
389 status = "disa
390 interrupts = <
391 };
392
393 adc0: adc@1e6e9000 {
394 compatible = "
395 reg = <0x1e6e9
396 clocks = <&sys
397 resets = <&sys
398 interrupts = <
399 #io-channel-ce
400 status = "disa
401 };
402
403 adc1: adc@1e6e9100 {
404 compatible = "
405 reg = <0x1e6e9
406 clocks = <&sys
407 resets = <&sys
408 interrupts = <
409 #io-channel-ce
410 status = "disa
411 };
412
413 sbc: secure-boot-contr
414 compatible = "
415 reg = <0x1e6f2
416 };
417
418 acry: crypto@1e6fa000
419 compatible = "
420 reg = <0x1e6fa
421 interrupts = <
422 clocks = <&sys
423 aspeed,ahbc =
424 };
425
426 video: video@1e700000
427 compatible = "
428 reg = <0x1e700
429 clocks = <&sys
430 <&sys
431 clock-names =
432 interrupts = <
433 status = "disa
434 };
435
436 gpio0: gpio@1e780000 {
437 #gpio-cells =
438 gpio-controlle
439 compatible = "
440 reg = <0x1e780
441 interrupts = <
442 gpio-ranges =
443 ngpios = <208>
444 clocks = <&sys
445 interrupt-cont
446 #interrupt-cel
447 };
448
449 sgpiom0: sgpiom@1e7805
450 #gpio-cells =
451 gpio-controlle
452 compatible = "
453 reg = <0x1e780
454 interrupts = <
455 clocks = <&sys
456 #interrupt-cel
457 interrupt-cont
458 bus-frequency
459 pinctrl-names
460 pinctrl-0 = <&
461 status = "disa
462 };
463
464 sgpiom1: sgpiom@1e7806
465 #gpio-cells =
466 gpio-controlle
467 compatible = "
468 reg = <0x1e780
469 interrupts = <
470 clocks = <&sys
471 #interrupt-cel
472 interrupt-cont
473 bus-frequency
474 pinctrl-names
475 pinctrl-0 = <&
476 status = "disa
477 };
478
479 gpio1: gpio@1e780800 {
480 #gpio-cells =
481 gpio-controlle
482 compatible = "
483 reg = <0x1e780
484 interrupts = <
485 gpio-ranges =
486 ngpios = <36>;
487 clocks = <&sys
488 interrupt-cont
489 #interrupt-cel
490 };
491
492 rtc: rtc@1e781000 {
493 compatible = "
494 reg = <0x1e781
495 interrupts = <
496 status = "disa
497 };
498
499 timer: timer@1e782000
500 compatible = "
501 reg = <0x1e782
502 interrupts-ext
503
504
505
506
507
508
509
510 clocks = <&sys
511 clock-names =
512 status = "disa
513 };
514
515 uart1: serial@1e783000
516 compatible = "
517 reg = <0x1e783
518 reg-shift = <2
519 reg-io-width =
520 interrupts = <
521 clocks = <&sys
522 resets = <&lpc
523 no-loopback-te
524 pinctrl-names
525 pinctrl-0 = <&
526 status = "disa
527 };
528
529 uart5: serial@1e784000
530 compatible = "
531 reg = <0x1e784
532 reg-shift = <2
533 interrupts = <
534 clocks = <&sys
535 no-loopback-te
536 };
537
538 wdt1: watchdog@1e78500
539 compatible = "
540 reg = <0x1e785
541 };
542
543 wdt2: watchdog@1e78504
544 compatible = "
545 reg = <0x1e785
546 status = "disa
547 };
548
549 wdt3: watchdog@1e78508
550 compatible = "
551 reg = <0x1e785
552 status = "disa
553 };
554
555 wdt4: watchdog@1e7850c
556 compatible = "
557 reg = <0x1e785
558 status = "disa
559 };
560
561 peci0: peci-controller
562 compatible = "
563 reg = <0x1e78b
564 interrupts = <
565 clocks = <&sys
566 resets = <&sys
567 cmd-timeout-ms
568 clock-frequenc
569 status = "disa
570 };
571
572 lpc: lpc@1e789000 {
573 compatible = "
574 reg = <0x1e789
575 reg-io-width =
576
577 #address-cells
578 #size-cells =
579 ranges = <0x0
580
581 kcs1: kcs@24 {
582 compat
583 reg =
584 interr
585 clocks
586 kcs_ch
587 status
588 };
589
590 kcs2: kcs@28 {
591 compat
592 reg =
593 interr
594 clocks
595 status
596 };
597
598 kcs3: kcs@2c {
599 compat
600 reg =
601 interr
602 clocks
603 status
604 };
605
606 kcs4: kcs@114
607 compat
608 reg =
609 interr
610 clocks
611 status
612 };
613
614 lpc_ctrl: lpc-
615 compat
616 reg =
617 clocks
618 status
619 };
620
621 lpc_snoop: lpc
622 compat
623 reg =
624 interr
625 clocks
626 status
627 };
628
629 lhc: lhc@a0 {
630 compat
631 reg =
632 };
633
634 lpc_reset: res
635 compat
636 reg =
637 #reset
638 };
639
640 uart_routing:
641 compat
642 reg =
643 status
644 };
645
646 ibt: ibt@140 {
647 compat
648 reg =
649 interr
650 clocks
651 status
652 };
653 };
654
655 sdc: sdc@1e740000 {
656 compatible = "
657 reg = <0x1e740
658 #address-cells
659 #size-cells =
660 ranges = <0 0x
661 clocks = <&sys
662 status = "disa
663
664 sdhci0: sdhci@
665 compat
666 reg =
667 interr
668 sdhci,
669 clocks
670 status
671 };
672
673 sdhci1: sdhci@
674 compat
675 reg =
676 interr
677 sdhci,
678 clocks
679 status
680 };
681 };
682
683 emmc_controller: sdc@1
684 compatible = "
685 reg = <0x1e750
686 #address-cells
687 #size-cells =
688 ranges = <0 0x
689 clocks = <&sys
690 status = "disa
691
692 emmc: sdhci@1e
693 compat
694 reg =
695 sdhci,
696 interr
697 clocks
698 pinctr
699 pinctr
700 };
701 };
702
703 vuart1: serial@1e78700
704 compatible = "
705 reg = <0x1e787
706 reg-shift = <2
707 interrupts = <
708 clocks = <&sys
709 no-loopback-te
710 status = "disa
711 };
712
713 vuart3: serial@1e78780
714 compatible = "
715 reg = <0x1e787
716 reg-shift = <2
717 interrupts = <
718 clocks = <&sys
719 no-loopback-te
720 status = "disa
721 };
722
723 vuart2: serial@1e78800
724 compatible = "
725 reg = <0x1e788
726 reg-shift = <2
727 interrupts = <
728 clocks = <&sys
729 no-loopback-te
730 status = "disa
731 };
732
733 vuart4: serial@1e78880
734 compatible = "
735 reg = <0x1e788
736 reg-shift = <2
737 interrupts = <
738 clocks = <&sys
739 no-loopback-te
740 status = "disa
741 };
742
743 uart2: serial@1e78d000
744 compatible = "
745 reg = <0x1e78d
746 reg-shift = <2
747 reg-io-width =
748 interrupts = <
749 clocks = <&sys
750 resets = <&lpc
751 no-loopback-te
752 pinctrl-names
753 pinctrl-0 = <&
754 status = "disa
755 };
756
757 uart3: serial@1e78e000
758 compatible = "
759 reg = <0x1e78e
760 reg-shift = <2
761 reg-io-width =
762 interrupts = <
763 clocks = <&sys
764 resets = <&lpc
765 no-loopback-te
766 pinctrl-names
767 pinctrl-0 = <&
768 status = "disa
769 };
770
771 uart4: serial@1e78f000
772 compatible = "
773 reg = <0x1e78f
774 reg-shift = <2
775 reg-io-width =
776 interrupts = <
777 clocks = <&sys
778 resets = <&lpc
779 no-loopback-te
780 pinctrl-names
781 pinctrl-0 = <&
782 status = "disa
783 };
784
785 uart6: serial@1e790000
786 compatible = "
787 reg = <0x1e790
788 reg-shift = <2
789 reg-io-width =
790 interrupts = <
791 clocks = <&sys
792 no-loopback-te
793 pinctrl-names
794 pinctrl-0 = <&
795
796 status = "disa
797 };
798
799 uart7: serial@1e790100
800 compatible = "
801 reg = <0x1e790
802 reg-shift = <2
803 reg-io-width =
804 interrupts = <
805 clocks = <&sys
806 no-loopback-te
807 pinctrl-names
808 pinctrl-0 = <&
809
810 status = "disa
811 };
812
813 uart8: serial@1e790200
814 compatible = "
815 reg = <0x1e790
816 reg-shift = <2
817 reg-io-width =
818 interrupts = <
819 clocks = <&sys
820 no-loopback-te
821 pinctrl-names
822 pinctrl-0 = <&
823
824 status = "disa
825 };
826
827 uart9: serial@1e790300
828 compatible = "
829 reg = <0x1e790
830 reg-shift = <2
831 reg-io-width =
832 interrupts = <
833 clocks = <&sys
834 no-loopback-te
835 pinctrl-names
836 pinctrl-0 = <&
837
838 status = "disa
839 };
840
841 i2c: bus@1e78a000 {
842 compatible = "
843 #address-cells
844 #size-cells =
845 ranges = <0 0x
846 };
847
848 fsim0: fsi@1e79b000 {
849 #interrupt-cel
850 compatible = "
851 reg = <0x1e79b
852 interrupts = <
853 pinctrl-names
854 pinctrl-0 = <&
855 clocks = <&sys
856 interrupt-cont
857 status = "disa
858 };
859
860 fsim1: fsi@1e79b100 {
861 #interrupt-cel
862 compatible = "
863 reg = <0x1e79b
864 interrupts = <
865 pinctrl-names
866 pinctrl-0 = <&
867 clocks = <&sys
868 interrupt-cont
869 status = "disa
870 };
871
872 udma: dma-controller@1
873 compatible = "
874 reg = <0x1e79e
875 interrupts = <
876 dma-channels =
877 #dma-cells = <
878 status = "disa
879 };
880 };
881 };
882 };
883
884 #include "aspeed-g6-pinctrl.dtsi"
885
886 &i2c {
887 i2c0: i2c@80 {
888 #address-cells = <1>;
889 #size-cells = <0>;
890 reg = <0x80 0x80>;
891 compatible = "aspeed,ast2600-i
892 clocks = <&syscon ASPEED_CLK_A
893 resets = <&syscon ASPEED_RESET
894 interrupts = <GIC_SPI 110 IRQ_
895 bus-frequency = <100000>;
896 pinctrl-names = "default";
897 pinctrl-0 = <&pinctrl_i2c1_def
898 status = "disabled";
899 };
900
901 i2c1: i2c@100 {
902 #address-cells = <1>;
903 #size-cells = <0>;
904 reg = <0x100 0x80>;
905 compatible = "aspeed,ast2600-i
906 clocks = <&syscon ASPEED_CLK_A
907 resets = <&syscon ASPEED_RESET
908 interrupts = <GIC_SPI 111 IRQ_
909 bus-frequency = <100000>;
910 pinctrl-names = "default";
911 pinctrl-0 = <&pinctrl_i2c2_def
912 status = "disabled";
913 };
914
915 i2c2: i2c@180 {
916 #address-cells = <1>;
917 #size-cells = <0>;
918 reg = <0x180 0x80>;
919 compatible = "aspeed,ast2600-i
920 clocks = <&syscon ASPEED_CLK_A
921 resets = <&syscon ASPEED_RESET
922 interrupts = <GIC_SPI 112 IRQ_
923 bus-frequency = <100000>;
924 pinctrl-names = "default";
925 pinctrl-0 = <&pinctrl_i2c3_def
926 status = "disabled";
927 };
928
929 i2c3: i2c@200 {
930 #address-cells = <1>;
931 #size-cells = <0>;
932 reg = <0x200 0x80>;
933 compatible = "aspeed,ast2600-i
934 clocks = <&syscon ASPEED_CLK_A
935 resets = <&syscon ASPEED_RESET
936 interrupts = <GIC_SPI 113 IRQ_
937 bus-frequency = <100000>;
938 pinctrl-names = "default";
939 pinctrl-0 = <&pinctrl_i2c4_def
940 status = "disabled";
941 };
942
943 i2c4: i2c@280 {
944 #address-cells = <1>;
945 #size-cells = <0>;
946 reg = <0x280 0x80>;
947 compatible = "aspeed,ast2600-i
948 clocks = <&syscon ASPEED_CLK_A
949 resets = <&syscon ASPEED_RESET
950 interrupts = <GIC_SPI 114 IRQ_
951 bus-frequency = <100000>;
952 pinctrl-names = "default";
953 pinctrl-0 = <&pinctrl_i2c5_def
954 status = "disabled";
955 };
956
957 i2c5: i2c@300 {
958 #address-cells = <1>;
959 #size-cells = <0>;
960 reg = <0x300 0x80>;
961 compatible = "aspeed,ast2600-i
962 clocks = <&syscon ASPEED_CLK_A
963 resets = <&syscon ASPEED_RESET
964 interrupts = <GIC_SPI 115 IRQ_
965 bus-frequency = <100000>;
966 pinctrl-names = "default";
967 pinctrl-0 = <&pinctrl_i2c6_def
968 status = "disabled";
969 };
970
971 i2c6: i2c@380 {
972 #address-cells = <1>;
973 #size-cells = <0>;
974 reg = <0x380 0x80>;
975 compatible = "aspeed,ast2600-i
976 clocks = <&syscon ASPEED_CLK_A
977 resets = <&syscon ASPEED_RESET
978 interrupts = <GIC_SPI 116 IRQ_
979 bus-frequency = <100000>;
980 pinctrl-names = "default";
981 pinctrl-0 = <&pinctrl_i2c7_def
982 status = "disabled";
983 };
984
985 i2c7: i2c@400 {
986 #address-cells = <1>;
987 #size-cells = <0>;
988 reg = <0x400 0x80>;
989 compatible = "aspeed,ast2600-i
990 clocks = <&syscon ASPEED_CLK_A
991 resets = <&syscon ASPEED_RESET
992 interrupts = <GIC_SPI 117 IRQ_
993 bus-frequency = <100000>;
994 pinctrl-names = "default";
995 pinctrl-0 = <&pinctrl_i2c8_def
996 status = "disabled";
997 };
998
999 i2c8: i2c@480 {
1000 #address-cells = <1>;
1001 #size-cells = <0>;
1002 reg = <0x480 0x80>;
1003 compatible = "aspeed,ast2600-
1004 clocks = <&syscon ASPEED_CLK_
1005 resets = <&syscon ASPEED_RESE
1006 interrupts = <GIC_SPI 118 IRQ
1007 bus-frequency = <100000>;
1008 pinctrl-names = "default";
1009 pinctrl-0 = <&pinctrl_i2c9_de
1010 status = "disabled";
1011 };
1012
1013 i2c9: i2c@500 {
1014 #address-cells = <1>;
1015 #size-cells = <0>;
1016 reg = <0x500 0x80>;
1017 compatible = "aspeed,ast2600-
1018 clocks = <&syscon ASPEED_CLK_
1019 resets = <&syscon ASPEED_RESE
1020 interrupts = <GIC_SPI 119 IRQ
1021 bus-frequency = <100000>;
1022 pinctrl-names = "default";
1023 pinctrl-0 = <&pinctrl_i2c10_d
1024 status = "disabled";
1025 };
1026
1027 i2c10: i2c@580 {
1028 #address-cells = <1>;
1029 #size-cells = <0>;
1030 reg = <0x580 0x80>;
1031 compatible = "aspeed,ast2600-
1032 clocks = <&syscon ASPEED_CLK_
1033 resets = <&syscon ASPEED_RESE
1034 interrupts = <GIC_SPI 120 IRQ
1035 bus-frequency = <100000>;
1036 pinctrl-names = "default";
1037 pinctrl-0 = <&pinctrl_i2c11_d
1038 status = "disabled";
1039 };
1040
1041 i2c11: i2c@600 {
1042 #address-cells = <1>;
1043 #size-cells = <0>;
1044 reg = <0x600 0x80>;
1045 compatible = "aspeed,ast2600-
1046 clocks = <&syscon ASPEED_CLK_
1047 resets = <&syscon ASPEED_RESE
1048 interrupts = <GIC_SPI 121 IRQ
1049 bus-frequency = <100000>;
1050 pinctrl-names = "default";
1051 pinctrl-0 = <&pinctrl_i2c12_d
1052 status = "disabled";
1053 };
1054
1055 i2c12: i2c@680 {
1056 #address-cells = <1>;
1057 #size-cells = <0>;
1058 reg = <0x680 0x80>;
1059 compatible = "aspeed,ast2600-
1060 clocks = <&syscon ASPEED_CLK_
1061 resets = <&syscon ASPEED_RESE
1062 interrupts = <GIC_SPI 122 IRQ
1063 bus-frequency = <100000>;
1064 pinctrl-names = "default";
1065 pinctrl-0 = <&pinctrl_i2c13_d
1066 status = "disabled";
1067 };
1068
1069 i2c13: i2c@700 {
1070 #address-cells = <1>;
1071 #size-cells = <0>;
1072 reg = <0x700 0x80>;
1073 compatible = "aspeed,ast2600-
1074 clocks = <&syscon ASPEED_CLK_
1075 resets = <&syscon ASPEED_RESE
1076 interrupts = <GIC_SPI 123 IRQ
1077 bus-frequency = <100000>;
1078 pinctrl-names = "default";
1079 pinctrl-0 = <&pinctrl_i2c14_d
1080 status = "disabled";
1081 };
1082
1083 i2c14: i2c@780 {
1084 #address-cells = <1>;
1085 #size-cells = <0>;
1086 reg = <0x780 0x80>;
1087 compatible = "aspeed,ast2600-
1088 clocks = <&syscon ASPEED_CLK_
1089 resets = <&syscon ASPEED_RESE
1090 interrupts = <GIC_SPI 124 IRQ
1091 bus-frequency = <100000>;
1092 pinctrl-names = "default";
1093 pinctrl-0 = <&pinctrl_i2c15_d
1094 status = "disabled";
1095 };
1096
1097 i2c15: i2c@800 {
1098 #address-cells = <1>;
1099 #size-cells = <0>;
1100 reg = <0x800 0x80>;
1101 compatible = "aspeed,ast2600-
1102 clocks = <&syscon ASPEED_CLK_
1103 resets = <&syscon ASPEED_RESE
1104 interrupts = <GIC_SPI 125 IRQ
1105 bus-frequency = <100000>;
1106 pinctrl-names = "default";
1107 pinctrl-0 = <&pinctrl_i2c16_d
1108 status = "disabled";
1109 };
1110 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.