1 // SPDX-License-Identifier: GPL-2.0-or-later 1 // SPDX-License-Identifier: GPL-2.0-or-later
2 // Copyright 2019 IBM Corp. 2 // Copyright 2019 IBM Corp.
3 3
4 #include <dt-bindings/interrupt-controller/arm 4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/interrupt-controller/asp 5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
6 #include <dt-bindings/clock/ast2600-clock.h> 6 #include <dt-bindings/clock/ast2600-clock.h>
7 7
8 / { 8 / {
9 model = "Aspeed BMC"; 9 model = "Aspeed BMC";
10 compatible = "aspeed,ast2600"; 10 compatible = "aspeed,ast2600";
11 #address-cells = <1>; 11 #address-cells = <1>;
12 #size-cells = <1>; 12 #size-cells = <1>;
13 interrupt-parent = <&gic>; 13 interrupt-parent = <&gic>;
14 14
15 aliases { 15 aliases {
16 i2c0 = &i2c0; 16 i2c0 = &i2c0;
17 i2c1 = &i2c1; 17 i2c1 = &i2c1;
18 i2c2 = &i2c2; 18 i2c2 = &i2c2;
19 i2c3 = &i2c3; 19 i2c3 = &i2c3;
20 i2c4 = &i2c4; 20 i2c4 = &i2c4;
21 i2c5 = &i2c5; 21 i2c5 = &i2c5;
22 i2c6 = &i2c6; 22 i2c6 = &i2c6;
23 i2c7 = &i2c7; 23 i2c7 = &i2c7;
24 i2c8 = &i2c8; 24 i2c8 = &i2c8;
25 i2c9 = &i2c9; 25 i2c9 = &i2c9;
26 i2c10 = &i2c10; 26 i2c10 = &i2c10;
27 i2c11 = &i2c11; 27 i2c11 = &i2c11;
28 i2c12 = &i2c12; 28 i2c12 = &i2c12;
29 i2c13 = &i2c13; 29 i2c13 = &i2c13;
30 i2c14 = &i2c14; 30 i2c14 = &i2c14;
31 i2c15 = &i2c15; 31 i2c15 = &i2c15;
32 serial0 = &uart1; 32 serial0 = &uart1;
33 serial1 = &uart2; 33 serial1 = &uart2;
34 serial2 = &uart3; 34 serial2 = &uart3;
35 serial3 = &uart4; 35 serial3 = &uart4;
36 serial4 = &uart5; 36 serial4 = &uart5;
37 serial5 = &vuart1; 37 serial5 = &vuart1;
38 serial6 = &vuart2; 38 serial6 = &vuart2;
39 mdio0 = &mdio0; 39 mdio0 = &mdio0;
40 mdio1 = &mdio1; 40 mdio1 = &mdio1;
41 mdio2 = &mdio2; 41 mdio2 = &mdio2;
42 mdio3 = &mdio3; 42 mdio3 = &mdio3;
43 }; 43 };
44 44
45 45
46 cpus { 46 cpus {
47 #address-cells = <1>; 47 #address-cells = <1>;
48 #size-cells = <0>; 48 #size-cells = <0>;
49 enable-method = "aspeed,ast260 49 enable-method = "aspeed,ast2600-smp";
50 50
51 cpu@f00 { 51 cpu@f00 {
52 compatible = "arm,cort 52 compatible = "arm,cortex-a7";
53 device_type = "cpu"; 53 device_type = "cpu";
54 reg = <0xf00>; 54 reg = <0xf00>;
55 }; 55 };
56 56
57 cpu@f01 { 57 cpu@f01 {
58 compatible = "arm,cort 58 compatible = "arm,cortex-a7";
59 device_type = "cpu"; 59 device_type = "cpu";
60 reg = <0xf01>; 60 reg = <0xf01>;
61 }; 61 };
62 }; 62 };
63 63
64 timer { 64 timer {
65 compatible = "arm,armv7-timer" 65 compatible = "arm,armv7-timer";
66 interrupt-parent = <&gic>; 66 interrupt-parent = <&gic>;
67 interrupts = <GIC_PPI 13 (GIC_ 67 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
68 <GIC_PPI 14 (GIC_ 68 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
69 <GIC_PPI 11 (GIC_ 69 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
70 <GIC_PPI 10 (GIC_ 70 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
71 clocks = <&syscon ASPEED_CLK_H 71 clocks = <&syscon ASPEED_CLK_HPLL>;
72 arm,cpu-registers-not-fw-confi 72 arm,cpu-registers-not-fw-configured;
73 always-on; 73 always-on;
74 }; 74 };
75 75
76 edac: sdram@1e6e0000 { 76 edac: sdram@1e6e0000 {
77 compatible = "aspeed,ast2600-s 77 compatible = "aspeed,ast2600-sdram-edac", "syscon";
78 reg = <0x1e6e0000 0x174>; 78 reg = <0x1e6e0000 0x174>;
79 interrupts = <GIC_SPI 0 IRQ_TY 79 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
80 }; 80 };
81 81
82 ahb { 82 ahb {
83 compatible = "simple-bus"; 83 compatible = "simple-bus";
84 #address-cells = <1>; 84 #address-cells = <1>;
85 #size-cells = <1>; 85 #size-cells = <1>;
86 device_type = "soc"; 86 device_type = "soc";
87 ranges; 87 ranges;
88 88
89 gic: interrupt-controller@4046 89 gic: interrupt-controller@40461000 {
90 compatible = "arm,cort 90 compatible = "arm,cortex-a7-gic";
91 interrupts = <GIC_PPI 91 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
92 #interrupt-cells = <3> 92 #interrupt-cells = <3>;
93 interrupt-controller; 93 interrupt-controller;
94 interrupt-parent = <&g 94 interrupt-parent = <&gic>;
95 reg = <0x40461000 0x10 95 reg = <0x40461000 0x1000>,
96 <0x40462000 0x1000 96 <0x40462000 0x1000>,
97 <0x40464000 0x2000 97 <0x40464000 0x2000>,
98 <0x40466000 0x2000 98 <0x40466000 0x2000>;
99 }; 99 };
100 100
101 ahbc: bus@1e600000 { 101 ahbc: bus@1e600000 {
102 compatible = "aspeed,a 102 compatible = "aspeed,ast2600-ahbc", "syscon";
103 reg = <0x1e600000 0x10 103 reg = <0x1e600000 0x100>;
104 }; 104 };
105 105
106 fmc: spi@1e620000 { 106 fmc: spi@1e620000 {
107 reg = <0x1e620000 0xc4 107 reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
108 #address-cells = <1>; 108 #address-cells = <1>;
109 #size-cells = <0>; 109 #size-cells = <0>;
110 compatible = "aspeed,a 110 compatible = "aspeed,ast2600-fmc";
111 clocks = <&syscon ASPE 111 clocks = <&syscon ASPEED_CLK_AHB>;
112 status = "disabled"; 112 status = "disabled";
113 interrupts = <GIC_SPI 113 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
114 flash@0 { 114 flash@0 {
115 reg = < 0 >; 115 reg = < 0 >;
116 compatible = " 116 compatible = "jedec,spi-nor";
117 spi-max-freque 117 spi-max-frequency = <50000000>;
118 spi-rx-bus-wid 118 spi-rx-bus-width = <2>;
119 status = "disa 119 status = "disabled";
120 }; 120 };
121 flash@1 { 121 flash@1 {
122 reg = < 1 >; 122 reg = < 1 >;
123 compatible = " 123 compatible = "jedec,spi-nor";
124 spi-max-freque 124 spi-max-frequency = <50000000>;
125 spi-rx-bus-wid 125 spi-rx-bus-width = <2>;
126 status = "disa 126 status = "disabled";
127 }; 127 };
128 flash@2 { 128 flash@2 {
129 reg = < 2 >; 129 reg = < 2 >;
130 compatible = " 130 compatible = "jedec,spi-nor";
131 spi-max-freque 131 spi-max-frequency = <50000000>;
132 spi-rx-bus-wid 132 spi-rx-bus-width = <2>;
133 status = "disa 133 status = "disabled";
134 }; 134 };
135 }; 135 };
136 136
137 spi1: spi@1e630000 { 137 spi1: spi@1e630000 {
138 reg = <0x1e630000 0xc4 138 reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
139 #address-cells = <1>; 139 #address-cells = <1>;
140 #size-cells = <0>; 140 #size-cells = <0>;
141 compatible = "aspeed,a 141 compatible = "aspeed,ast2600-spi";
142 clocks = <&syscon ASPE 142 clocks = <&syscon ASPEED_CLK_AHB>;
143 status = "disabled"; 143 status = "disabled";
144 flash@0 { 144 flash@0 {
145 reg = < 0 >; 145 reg = < 0 >;
146 compatible = " 146 compatible = "jedec,spi-nor";
147 spi-max-freque 147 spi-max-frequency = <50000000>;
148 spi-rx-bus-wid 148 spi-rx-bus-width = <2>;
149 status = "disa 149 status = "disabled";
150 }; 150 };
151 flash@1 { 151 flash@1 {
152 reg = < 1 >; 152 reg = < 1 >;
153 compatible = " 153 compatible = "jedec,spi-nor";
154 spi-max-freque 154 spi-max-frequency = <50000000>;
155 spi-rx-bus-wid 155 spi-rx-bus-width = <2>;
156 status = "disa 156 status = "disabled";
157 }; 157 };
158 }; 158 };
159 159
160 spi2: spi@1e631000 { 160 spi2: spi@1e631000 {
161 reg = <0x1e631000 0xc4 161 reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
162 #address-cells = <1>; 162 #address-cells = <1>;
163 #size-cells = <0>; 163 #size-cells = <0>;
164 compatible = "aspeed,a 164 compatible = "aspeed,ast2600-spi";
165 clocks = <&syscon ASPE 165 clocks = <&syscon ASPEED_CLK_AHB>;
166 status = "disabled"; 166 status = "disabled";
167 flash@0 { 167 flash@0 {
168 reg = < 0 >; 168 reg = < 0 >;
169 compatible = " 169 compatible = "jedec,spi-nor";
170 spi-max-freque 170 spi-max-frequency = <50000000>;
171 spi-rx-bus-wid 171 spi-rx-bus-width = <2>;
172 status = "disa 172 status = "disabled";
173 }; 173 };
174 flash@1 { 174 flash@1 {
175 reg = < 1 >; 175 reg = < 1 >;
176 compatible = " 176 compatible = "jedec,spi-nor";
177 spi-max-freque 177 spi-max-frequency = <50000000>;
178 spi-rx-bus-wid 178 spi-rx-bus-width = <2>;
179 status = "disa 179 status = "disabled";
180 }; 180 };
181 flash@2 { 181 flash@2 {
182 reg = < 2 >; 182 reg = < 2 >;
183 compatible = " 183 compatible = "jedec,spi-nor";
184 spi-max-freque 184 spi-max-frequency = <50000000>;
185 spi-rx-bus-wid 185 spi-rx-bus-width = <2>;
186 status = "disa 186 status = "disabled";
187 }; 187 };
188 }; 188 };
189 189
190 mdio0: mdio@1e650000 { 190 mdio0: mdio@1e650000 {
191 compatible = "aspeed,a 191 compatible = "aspeed,ast2600-mdio";
192 reg = <0x1e650000 0x8> 192 reg = <0x1e650000 0x8>;
193 #address-cells = <1>; 193 #address-cells = <1>;
194 #size-cells = <0>; 194 #size-cells = <0>;
195 status = "disabled"; 195 status = "disabled";
196 pinctrl-names = "defau 196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_ 197 pinctrl-0 = <&pinctrl_mdio1_default>;
198 resets = <&syscon ASPE 198 resets = <&syscon ASPEED_RESET_MII>;
199 }; 199 };
200 200
201 mdio1: mdio@1e650008 { 201 mdio1: mdio@1e650008 {
202 compatible = "aspeed,a 202 compatible = "aspeed,ast2600-mdio";
203 reg = <0x1e650008 0x8> 203 reg = <0x1e650008 0x8>;
204 #address-cells = <1>; 204 #address-cells = <1>;
205 #size-cells = <0>; 205 #size-cells = <0>;
206 status = "disabled"; 206 status = "disabled";
207 pinctrl-names = "defau 207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_ 208 pinctrl-0 = <&pinctrl_mdio2_default>;
209 resets = <&syscon ASPE 209 resets = <&syscon ASPEED_RESET_MII>;
210 }; 210 };
211 211
212 mdio2: mdio@1e650010 { 212 mdio2: mdio@1e650010 {
213 compatible = "aspeed,a 213 compatible = "aspeed,ast2600-mdio";
214 reg = <0x1e650010 0x8> 214 reg = <0x1e650010 0x8>;
215 #address-cells = <1>; 215 #address-cells = <1>;
216 #size-cells = <0>; 216 #size-cells = <0>;
217 status = "disabled"; 217 status = "disabled";
218 pinctrl-names = "defau 218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_ 219 pinctrl-0 = <&pinctrl_mdio3_default>;
220 resets = <&syscon ASPE 220 resets = <&syscon ASPEED_RESET_MII>;
221 }; 221 };
222 222
223 mdio3: mdio@1e650018 { 223 mdio3: mdio@1e650018 {
224 compatible = "aspeed,a 224 compatible = "aspeed,ast2600-mdio";
225 reg = <0x1e650018 0x8> 225 reg = <0x1e650018 0x8>;
226 #address-cells = <1>; 226 #address-cells = <1>;
227 #size-cells = <0>; 227 #size-cells = <0>;
228 status = "disabled"; 228 status = "disabled";
229 pinctrl-names = "defau 229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_ 230 pinctrl-0 = <&pinctrl_mdio4_default>;
231 resets = <&syscon ASPE 231 resets = <&syscon ASPEED_RESET_MII>;
232 }; 232 };
233 233
234 mac0: ethernet@1e660000 { !! 234 mac0: ftgmac@1e660000 {
235 compatible = "aspeed,a 235 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
236 reg = <0x1e660000 0x18 236 reg = <0x1e660000 0x180>;
>> 237 #address-cells = <1>;
>> 238 #size-cells = <0>;
237 interrupts = <GIC_SPI 239 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
238 clocks = <&syscon ASPE 240 clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
239 status = "disabled"; 241 status = "disabled";
240 }; 242 };
241 243
242 mac1: ethernet@1e680000 { !! 244 mac1: ftgmac@1e680000 {
243 compatible = "aspeed,a 245 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
244 reg = <0x1e680000 0x18 246 reg = <0x1e680000 0x180>;
>> 247 #address-cells = <1>;
>> 248 #size-cells = <0>;
245 interrupts = <GIC_SPI 249 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
246 clocks = <&syscon ASPE 250 clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
247 status = "disabled"; 251 status = "disabled";
248 }; 252 };
249 253
250 mac2: ethernet@1e670000 { !! 254 mac2: ftgmac@1e670000 {
251 compatible = "aspeed,a 255 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
252 reg = <0x1e670000 0x18 256 reg = <0x1e670000 0x180>;
>> 257 #address-cells = <1>;
>> 258 #size-cells = <0>;
253 interrupts = <GIC_SPI 259 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
254 clocks = <&syscon ASPE 260 clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
255 status = "disabled"; 261 status = "disabled";
256 }; 262 };
257 263
258 mac3: ethernet@1e690000 { !! 264 mac3: ftgmac@1e690000 {
259 compatible = "aspeed,a 265 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
260 reg = <0x1e690000 0x18 266 reg = <0x1e690000 0x180>;
>> 267 #address-cells = <1>;
>> 268 #size-cells = <0>;
261 interrupts = <GIC_SPI 269 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
262 clocks = <&syscon ASPE 270 clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
263 status = "disabled"; 271 status = "disabled";
264 }; 272 };
265 273
266 ehci0: usb@1e6a1000 { 274 ehci0: usb@1e6a1000 {
267 compatible = "aspeed,a 275 compatible = "aspeed,ast2600-ehci", "generic-ehci";
268 reg = <0x1e6a1000 0x10 276 reg = <0x1e6a1000 0x100>;
269 interrupts = <GIC_SPI 277 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
270 clocks = <&syscon ASPE 278 clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
271 pinctrl-names = "defau 279 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_ 280 pinctrl-0 = <&pinctrl_usb2ah_default>;
273 status = "disabled"; 281 status = "disabled";
274 }; 282 };
275 283
276 ehci1: usb@1e6a3000 { 284 ehci1: usb@1e6a3000 {
277 compatible = "aspeed,a 285 compatible = "aspeed,ast2600-ehci", "generic-ehci";
278 reg = <0x1e6a3000 0x10 286 reg = <0x1e6a3000 0x100>;
279 interrupts = <GIC_SPI 287 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
280 clocks = <&syscon ASPE 288 clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
281 pinctrl-names = "defau 289 pinctrl-names = "default";
282 pinctrl-0 = <&pinctrl_ 290 pinctrl-0 = <&pinctrl_usb2bh_default>;
283 status = "disabled"; 291 status = "disabled";
284 }; 292 };
285 293
286 uhci: usb@1e6b0000 { 294 uhci: usb@1e6b0000 {
287 compatible = "aspeed,a 295 compatible = "aspeed,ast2600-uhci", "generic-uhci";
288 reg = <0x1e6b0000 0x10 296 reg = <0x1e6b0000 0x100>;
289 interrupts = <GIC_SPI 297 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
290 #ports = <2>; 298 #ports = <2>;
291 clocks = <&syscon ASPE 299 clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
292 status = "disabled"; 300 status = "disabled";
293 /* 301 /*
294 * No default pinmux, 302 * No default pinmux, it will follow EHCI, use an
295 * explicit pinmux ove 303 * explicit pinmux override if EHCI is not enabled.
296 */ 304 */
297 }; 305 };
298 306
299 vhub: usb-vhub@1e6a0000 { 307 vhub: usb-vhub@1e6a0000 {
300 compatible = "aspeed,a 308 compatible = "aspeed,ast2600-usb-vhub";
301 reg = <0x1e6a0000 0x35 309 reg = <0x1e6a0000 0x350>;
302 interrupts = <GIC_SPI 310 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
303 clocks = <&syscon ASPE 311 clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
304 aspeed,vhub-downstream 312 aspeed,vhub-downstream-ports = <7>;
305 aspeed,vhub-generic-en 313 aspeed,vhub-generic-endpoints = <21>;
306 pinctrl-names = "defau 314 pinctrl-names = "default";
307 pinctrl-0 = <&pinctrl_ 315 pinctrl-0 = <&pinctrl_usb2ad_default>;
308 status = "disabled"; 316 status = "disabled";
309 }; 317 };
310 318
311 udc: usb@1e6a2000 { 319 udc: usb@1e6a2000 {
312 compatible = "aspeed,a 320 compatible = "aspeed,ast2600-udc";
313 reg = <0x1e6a2000 0x30 321 reg = <0x1e6a2000 0x300>;
314 interrupts = <GIC_SPI 322 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
315 clocks = <&syscon ASPE 323 clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
316 pinctrl-names = "defau 324 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_ 325 pinctrl-0 = <&pinctrl_usb2bd_default>;
318 status = "disabled"; 326 status = "disabled";
319 }; 327 };
320 328
321 apb { 329 apb {
322 compatible = "simple-b 330 compatible = "simple-bus";
323 #address-cells = <1>; 331 #address-cells = <1>;
324 #size-cells = <1>; 332 #size-cells = <1>;
325 ranges; 333 ranges;
326 334
327 hace: crypto@1e6d0000 335 hace: crypto@1e6d0000 {
328 compatible = " 336 compatible = "aspeed,ast2600-hace";
329 reg = <0x1e6d0 337 reg = <0x1e6d0000 0x200>;
330 interrupts = < 338 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
331 clocks = <&sys 339 clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
332 resets = <&sys 340 resets = <&syscon ASPEED_RESET_HACE>;
333 }; 341 };
334 342
335 syscon: syscon@1e6e200 343 syscon: syscon@1e6e2000 {
336 compatible = " 344 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
337 reg = <0x1e6e2 345 reg = <0x1e6e2000 0x1000>;
338 ranges = <0 0x 346 ranges = <0 0x1e6e2000 0x1000>;
339 #address-cells 347 #address-cells = <1>;
340 #size-cells = 348 #size-cells = <1>;
341 #clock-cells = 349 #clock-cells = <1>;
342 #reset-cells = 350 #reset-cells = <1>;
343 351
344 pinctrl: pinct 352 pinctrl: pinctrl {
345 compat 353 compatible = "aspeed,ast2600-pinctrl";
346 }; 354 };
347 355
348 silicon-id@14 356 silicon-id@14 {
349 compat 357 compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
350 reg = 358 reg = <0x14 0x4 0x5b0 0x8>;
351 }; 359 };
352 360
353 smp-memram@180 361 smp-memram@180 {
354 compat 362 compatible = "aspeed,ast2600-smpmem";
355 reg = 363 reg = <0x180 0x40>;
356 }; 364 };
357 365
358 scu_ic0: inter 366 scu_ic0: interrupt-controller@560 {
359 #inter 367 #interrupt-cells = <1>;
360 compat 368 compatible = "aspeed,ast2600-scu-ic0";
361 reg = 369 reg = <0x560 0x4>;
362 interr 370 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
363 interr 371 interrupt-controller;
364 }; 372 };
365 373
366 scu_ic1: inter 374 scu_ic1: interrupt-controller@570 {
367 #inter 375 #interrupt-cells = <1>;
368 compat 376 compatible = "aspeed,ast2600-scu-ic1";
369 reg = 377 reg = <0x570 0x4>;
370 interr 378 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
371 interr 379 interrupt-controller;
372 }; 380 };
373 }; 381 };
374 382
375 rng: hwrng@1e6e2524 { 383 rng: hwrng@1e6e2524 {
376 compatible = " 384 compatible = "timeriomem_rng";
377 reg = <0x1e6e2 385 reg = <0x1e6e2524 0x4>;
378 period = <1>; 386 period = <1>;
379 quality = <100 387 quality = <100>;
380 }; 388 };
381 389
382 gfx: display@1e6e6000 390 gfx: display@1e6e6000 {
383 compatible = " 391 compatible = "aspeed,ast2600-gfx", "syscon";
384 reg = <0x1e6e6 392 reg = <0x1e6e6000 0x1000>;
385 reg-io-width = 393 reg-io-width = <4>;
386 clocks = <&sys 394 clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
387 resets = <&sys 395 resets = <&syscon ASPEED_RESET_GRAPHICS>;
388 syscon = <&sys 396 syscon = <&syscon>;
389 status = "disa 397 status = "disabled";
390 interrupts = < 398 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
391 }; 399 };
392 400
>> 401 xdma: xdma@1e6e7000 {
>> 402 compatible = "aspeed,ast2600-xdma";
>> 403 reg = <0x1e6e7000 0x100>;
>> 404 clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
>> 405 resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
>> 406 reset-names = "device", "root-complex";
>> 407 interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
>> 408 <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
>> 409 aspeed,pcie-device = "bmc";
>> 410 aspeed,scu = <&syscon>;
>> 411 status = "disabled";
>> 412 };
>> 413
393 adc0: adc@1e6e9000 { 414 adc0: adc@1e6e9000 {
394 compatible = " 415 compatible = "aspeed,ast2600-adc0";
395 reg = <0x1e6e9 416 reg = <0x1e6e9000 0x100>;
396 clocks = <&sys 417 clocks = <&syscon ASPEED_CLK_APB2>;
397 resets = <&sys 418 resets = <&syscon ASPEED_RESET_ADC>;
398 interrupts = < 419 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
399 #io-channel-ce 420 #io-channel-cells = <1>;
400 status = "disa 421 status = "disabled";
401 }; 422 };
402 423
403 adc1: adc@1e6e9100 { 424 adc1: adc@1e6e9100 {
404 compatible = " 425 compatible = "aspeed,ast2600-adc1";
405 reg = <0x1e6e9 426 reg = <0x1e6e9100 0x100>;
406 clocks = <&sys 427 clocks = <&syscon ASPEED_CLK_APB2>;
407 resets = <&sys 428 resets = <&syscon ASPEED_RESET_ADC>;
408 interrupts = < 429 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
409 #io-channel-ce 430 #io-channel-cells = <1>;
410 status = "disa 431 status = "disabled";
411 }; 432 };
412 433
413 sbc: secure-boot-contr 434 sbc: secure-boot-controller@1e6f2000 {
414 compatible = " 435 compatible = "aspeed,ast2600-sbc";
415 reg = <0x1e6f2 436 reg = <0x1e6f2000 0x1000>;
416 }; 437 };
417 438
418 acry: crypto@1e6fa000 439 acry: crypto@1e6fa000 {
419 compatible = " 440 compatible = "aspeed,ast2600-acry";
420 reg = <0x1e6fa 441 reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
421 interrupts = < 442 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
422 clocks = <&sys 443 clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
423 aspeed,ahbc = 444 aspeed,ahbc = <&ahbc>;
424 }; 445 };
425 446
426 video: video@1e700000 447 video: video@1e700000 {
427 compatible = " 448 compatible = "aspeed,ast2600-video-engine";
428 reg = <0x1e700 449 reg = <0x1e700000 0x1000>;
429 clocks = <&sys 450 clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
430 <&sys 451 <&syscon ASPEED_CLK_GATE_ECLK>;
431 clock-names = 452 clock-names = "vclk", "eclk";
432 interrupts = < 453 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
433 status = "disa 454 status = "disabled";
434 }; 455 };
435 456
436 gpio0: gpio@1e780000 { 457 gpio0: gpio@1e780000 {
437 #gpio-cells = 458 #gpio-cells = <2>;
438 gpio-controlle 459 gpio-controller;
439 compatible = " 460 compatible = "aspeed,ast2600-gpio";
440 reg = <0x1e780 461 reg = <0x1e780000 0x400>;
441 interrupts = < 462 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
442 gpio-ranges = 463 gpio-ranges = <&pinctrl 0 0 208>;
443 ngpios = <208> 464 ngpios = <208>;
444 clocks = <&sys 465 clocks = <&syscon ASPEED_CLK_APB2>;
445 interrupt-cont 466 interrupt-controller;
446 #interrupt-cel 467 #interrupt-cells = <2>;
447 }; 468 };
448 469
449 sgpiom0: sgpiom@1e7805 470 sgpiom0: sgpiom@1e780500 {
450 #gpio-cells = 471 #gpio-cells = <2>;
451 gpio-controlle 472 gpio-controller;
452 compatible = " 473 compatible = "aspeed,ast2600-sgpiom";
453 reg = <0x1e780 474 reg = <0x1e780500 0x100>;
454 interrupts = < 475 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
455 clocks = <&sys 476 clocks = <&syscon ASPEED_CLK_APB2>;
456 #interrupt-cel 477 #interrupt-cells = <2>;
457 interrupt-cont 478 interrupt-controller;
458 bus-frequency 479 bus-frequency = <12000000>;
459 pinctrl-names 480 pinctrl-names = "default";
460 pinctrl-0 = <& 481 pinctrl-0 = <&pinctrl_sgpm1_default>;
461 status = "disa 482 status = "disabled";
462 }; 483 };
463 484
464 sgpiom1: sgpiom@1e7806 485 sgpiom1: sgpiom@1e780600 {
465 #gpio-cells = 486 #gpio-cells = <2>;
466 gpio-controlle 487 gpio-controller;
467 compatible = " 488 compatible = "aspeed,ast2600-sgpiom";
468 reg = <0x1e780 489 reg = <0x1e780600 0x100>;
469 interrupts = < 490 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
470 clocks = <&sys 491 clocks = <&syscon ASPEED_CLK_APB2>;
471 #interrupt-cel 492 #interrupt-cells = <2>;
472 interrupt-cont 493 interrupt-controller;
473 bus-frequency 494 bus-frequency = <12000000>;
474 pinctrl-names 495 pinctrl-names = "default";
475 pinctrl-0 = <& 496 pinctrl-0 = <&pinctrl_sgpm2_default>;
476 status = "disa 497 status = "disabled";
477 }; 498 };
478 499
479 gpio1: gpio@1e780800 { 500 gpio1: gpio@1e780800 {
480 #gpio-cells = 501 #gpio-cells = <2>;
481 gpio-controlle 502 gpio-controller;
482 compatible = " 503 compatible = "aspeed,ast2600-gpio";
483 reg = <0x1e780 504 reg = <0x1e780800 0x800>;
484 interrupts = < 505 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
485 gpio-ranges = 506 gpio-ranges = <&pinctrl 0 208 36>;
486 ngpios = <36>; 507 ngpios = <36>;
487 clocks = <&sys 508 clocks = <&syscon ASPEED_CLK_APB1>;
488 interrupt-cont 509 interrupt-controller;
489 #interrupt-cel 510 #interrupt-cells = <2>;
490 }; 511 };
491 512
492 rtc: rtc@1e781000 { 513 rtc: rtc@1e781000 {
493 compatible = " 514 compatible = "aspeed,ast2600-rtc";
494 reg = <0x1e781 515 reg = <0x1e781000 0x18>;
495 interrupts = < 516 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
496 status = "disa 517 status = "disabled";
497 }; 518 };
498 519
499 timer: timer@1e782000 520 timer: timer@1e782000 {
500 compatible = " 521 compatible = "aspeed,ast2600-timer";
501 reg = <0x1e782 522 reg = <0x1e782000 0x90>;
502 interrupts-ext 523 interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
503 524 <&gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
504 525 <&gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
505 526 <&gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
506 527 <&gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
507 528 <&gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
508 529 <&gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
509 530 <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
510 clocks = <&sys 531 clocks = <&syscon ASPEED_CLK_APB1>;
511 clock-names = 532 clock-names = "PCLK";
512 status = "disa 533 status = "disabled";
513 }; 534 };
514 535
515 uart1: serial@1e783000 536 uart1: serial@1e783000 {
516 compatible = " 537 compatible = "ns16550a";
517 reg = <0x1e783 538 reg = <0x1e783000 0x20>;
518 reg-shift = <2 539 reg-shift = <2>;
519 reg-io-width = 540 reg-io-width = <4>;
520 interrupts = < 541 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
521 clocks = <&sys 542 clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
522 resets = <&lpc 543 resets = <&lpc_reset 4>;
523 no-loopback-te 544 no-loopback-test;
524 pinctrl-names 545 pinctrl-names = "default";
525 pinctrl-0 = <& 546 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
526 status = "disa 547 status = "disabled";
527 }; 548 };
528 549
529 uart5: serial@1e784000 550 uart5: serial@1e784000 {
530 compatible = " 551 compatible = "ns16550a";
531 reg = <0x1e784 552 reg = <0x1e784000 0x1000>;
532 reg-shift = <2 553 reg-shift = <2>;
533 interrupts = < 554 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
534 clocks = <&sys 555 clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
535 no-loopback-te 556 no-loopback-test;
536 }; 557 };
537 558
538 wdt1: watchdog@1e78500 559 wdt1: watchdog@1e785000 {
539 compatible = " 560 compatible = "aspeed,ast2600-wdt";
540 reg = <0x1e785 561 reg = <0x1e785000 0x40>;
541 }; 562 };
542 563
543 wdt2: watchdog@1e78504 564 wdt2: watchdog@1e785040 {
544 compatible = " 565 compatible = "aspeed,ast2600-wdt";
545 reg = <0x1e785 566 reg = <0x1e785040 0x40>;
546 status = "disa 567 status = "disabled";
547 }; 568 };
548 569
549 wdt3: watchdog@1e78508 570 wdt3: watchdog@1e785080 {
550 compatible = " 571 compatible = "aspeed,ast2600-wdt";
551 reg = <0x1e785 572 reg = <0x1e785080 0x40>;
552 status = "disa 573 status = "disabled";
553 }; 574 };
554 575
555 wdt4: watchdog@1e7850c 576 wdt4: watchdog@1e7850c0 {
556 compatible = " 577 compatible = "aspeed,ast2600-wdt";
557 reg = <0x1e785 578 reg = <0x1e7850C0 0x40>;
558 status = "disa 579 status = "disabled";
559 }; 580 };
560 581
561 peci0: peci-controller 582 peci0: peci-controller@1e78b000 {
562 compatible = " 583 compatible = "aspeed,ast2600-peci";
563 reg = <0x1e78b 584 reg = <0x1e78b000 0x100>;
564 interrupts = < 585 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
565 clocks = <&sys 586 clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
566 resets = <&sys 587 resets = <&syscon ASPEED_RESET_PECI>;
567 cmd-timeout-ms 588 cmd-timeout-ms = <1000>;
568 clock-frequenc 589 clock-frequency = <1000000>;
569 status = "disa 590 status = "disabled";
570 }; 591 };
571 592
572 lpc: lpc@1e789000 { 593 lpc: lpc@1e789000 {
573 compatible = " 594 compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
574 reg = <0x1e789 595 reg = <0x1e789000 0x1000>;
575 reg-io-width = 596 reg-io-width = <4>;
576 597
577 #address-cells 598 #address-cells = <1>;
578 #size-cells = 599 #size-cells = <1>;
579 ranges = <0x0 600 ranges = <0x0 0x1e789000 0x1000>;
580 601
581 kcs1: kcs@24 { 602 kcs1: kcs@24 {
582 compat 603 compatible = "aspeed,ast2500-kcs-bmc-v2";
583 reg = 604 reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
584 interr 605 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
585 clocks 606 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
586 kcs_ch 607 kcs_chan = <1>;
587 status 608 status = "disabled";
588 }; 609 };
589 610
590 kcs2: kcs@28 { 611 kcs2: kcs@28 {
591 compat 612 compatible = "aspeed,ast2500-kcs-bmc-v2";
592 reg = 613 reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
593 interr 614 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
594 clocks 615 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
595 status 616 status = "disabled";
596 }; 617 };
597 618
598 kcs3: kcs@2c { 619 kcs3: kcs@2c {
599 compat 620 compatible = "aspeed,ast2500-kcs-bmc-v2";
600 reg = 621 reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
601 interr 622 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
602 clocks 623 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
603 status 624 status = "disabled";
604 }; 625 };
605 626
606 kcs4: kcs@114 627 kcs4: kcs@114 {
607 compat 628 compatible = "aspeed,ast2500-kcs-bmc-v2";
608 reg = 629 reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
609 interr 630 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
610 clocks 631 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
611 status 632 status = "disabled";
612 }; 633 };
613 634
614 lpc_ctrl: lpc- 635 lpc_ctrl: lpc-ctrl@80 {
615 compat 636 compatible = "aspeed,ast2600-lpc-ctrl";
616 reg = 637 reg = <0x80 0x80>;
617 clocks 638 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
618 status 639 status = "disabled";
619 }; 640 };
620 641
621 lpc_snoop: lpc 642 lpc_snoop: lpc-snoop@80 {
622 compat 643 compatible = "aspeed,ast2600-lpc-snoop";
623 reg = 644 reg = <0x80 0x80>;
624 interr 645 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
625 clocks 646 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
626 status 647 status = "disabled";
627 }; 648 };
628 649
629 lhc: lhc@a0 { 650 lhc: lhc@a0 {
630 compat 651 compatible = "aspeed,ast2600-lhc";
631 reg = 652 reg = <0xa0 0x24 0xc8 0x8>;
632 }; 653 };
633 654
634 lpc_reset: res 655 lpc_reset: reset-controller@98 {
635 compat 656 compatible = "aspeed,ast2600-lpc-reset";
636 reg = 657 reg = <0x98 0x4>;
637 #reset 658 #reset-cells = <1>;
638 }; 659 };
639 660
640 uart_routing: 661 uart_routing: uart-routing@98 {
641 compat 662 compatible = "aspeed,ast2600-uart-routing";
642 reg = 663 reg = <0x98 0x8>;
643 status 664 status = "disabled";
644 }; 665 };
645 666
646 ibt: ibt@140 { 667 ibt: ibt@140 {
647 compat 668 compatible = "aspeed,ast2600-ibt-bmc";
648 reg = 669 reg = <0x140 0x18>;
649 interr 670 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
650 clocks 671 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
651 status 672 status = "disabled";
652 }; 673 };
653 }; 674 };
654 675
655 sdc: sdc@1e740000 { 676 sdc: sdc@1e740000 {
656 compatible = " 677 compatible = "aspeed,ast2600-sd-controller";
657 reg = <0x1e740 678 reg = <0x1e740000 0x100>;
658 #address-cells 679 #address-cells = <1>;
659 #size-cells = 680 #size-cells = <1>;
660 ranges = <0 0x 681 ranges = <0 0x1e740000 0x10000>;
661 clocks = <&sys 682 clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
662 status = "disa 683 status = "disabled";
663 684
664 sdhci0: sdhci@ 685 sdhci0: sdhci@1e740100 {
665 compat 686 compatible = "aspeed,ast2600-sdhci", "sdhci";
666 reg = 687 reg = <0x100 0x100>;
667 interr 688 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
668 sdhci, 689 sdhci,auto-cmd12;
669 clocks 690 clocks = <&syscon ASPEED_CLK_SDIO>;
670 status 691 status = "disabled";
671 }; 692 };
672 693
673 sdhci1: sdhci@ 694 sdhci1: sdhci@1e740200 {
674 compat 695 compatible = "aspeed,ast2600-sdhci", "sdhci";
675 reg = 696 reg = <0x200 0x100>;
676 interr 697 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
677 sdhci, 698 sdhci,auto-cmd12;
678 clocks 699 clocks = <&syscon ASPEED_CLK_SDIO>;
679 status 700 status = "disabled";
680 }; 701 };
681 }; 702 };
682 703
683 emmc_controller: sdc@1 704 emmc_controller: sdc@1e750000 {
684 compatible = " 705 compatible = "aspeed,ast2600-sd-controller";
685 reg = <0x1e750 706 reg = <0x1e750000 0x100>;
686 #address-cells 707 #address-cells = <1>;
687 #size-cells = 708 #size-cells = <1>;
688 ranges = <0 0x 709 ranges = <0 0x1e750000 0x10000>;
689 clocks = <&sys 710 clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
690 status = "disa 711 status = "disabled";
691 712
692 emmc: sdhci@1e 713 emmc: sdhci@1e750100 {
693 compat 714 compatible = "aspeed,ast2600-sdhci";
694 reg = 715 reg = <0x100 0x100>;
695 sdhci, 716 sdhci,auto-cmd12;
696 interr 717 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
697 clocks 718 clocks = <&syscon ASPEED_CLK_EMMC>;
698 pinctr 719 pinctrl-names = "default";
699 pinctr 720 pinctrl-0 = <&pinctrl_emmc_default>;
700 }; 721 };
701 }; 722 };
702 723
703 vuart1: serial@1e78700 724 vuart1: serial@1e787000 {
704 compatible = " 725 compatible = "aspeed,ast2500-vuart";
705 reg = <0x1e787 726 reg = <0x1e787000 0x40>;
706 reg-shift = <2 727 reg-shift = <2>;
707 interrupts = < 728 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
708 clocks = <&sys 729 clocks = <&syscon ASPEED_CLK_APB1>;
709 no-loopback-te 730 no-loopback-test;
710 status = "disa 731 status = "disabled";
711 }; 732 };
712 733
713 vuart3: serial@1e78780 734 vuart3: serial@1e787800 {
714 compatible = " 735 compatible = "aspeed,ast2500-vuart";
715 reg = <0x1e787 736 reg = <0x1e787800 0x40>;
716 reg-shift = <2 737 reg-shift = <2>;
717 interrupts = < 738 interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
718 clocks = <&sys 739 clocks = <&syscon ASPEED_CLK_APB2>;
719 no-loopback-te 740 no-loopback-test;
720 status = "disa 741 status = "disabled";
721 }; 742 };
722 743
723 vuart2: serial@1e78800 744 vuart2: serial@1e788000 {
724 compatible = " 745 compatible = "aspeed,ast2500-vuart";
725 reg = <0x1e788 746 reg = <0x1e788000 0x40>;
726 reg-shift = <2 747 reg-shift = <2>;
727 interrupts = < 748 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
728 clocks = <&sys 749 clocks = <&syscon ASPEED_CLK_APB1>;
729 no-loopback-te 750 no-loopback-test;
730 status = "disa 751 status = "disabled";
731 }; 752 };
732 753
733 vuart4: serial@1e78880 754 vuart4: serial@1e788800 {
734 compatible = " 755 compatible = "aspeed,ast2500-vuart";
735 reg = <0x1e788 756 reg = <0x1e788800 0x40>;
736 reg-shift = <2 757 reg-shift = <2>;
737 interrupts = < 758 interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
738 clocks = <&sys 759 clocks = <&syscon ASPEED_CLK_APB2>;
739 no-loopback-te 760 no-loopback-test;
740 status = "disa 761 status = "disabled";
741 }; 762 };
742 763
743 uart2: serial@1e78d000 764 uart2: serial@1e78d000 {
744 compatible = " 765 compatible = "ns16550a";
745 reg = <0x1e78d 766 reg = <0x1e78d000 0x20>;
746 reg-shift = <2 767 reg-shift = <2>;
747 reg-io-width = 768 reg-io-width = <4>;
748 interrupts = < 769 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
749 clocks = <&sys 770 clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
750 resets = <&lpc 771 resets = <&lpc_reset 5>;
751 no-loopback-te 772 no-loopback-test;
752 pinctrl-names 773 pinctrl-names = "default";
753 pinctrl-0 = <& 774 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
754 status = "disa 775 status = "disabled";
755 }; 776 };
756 777
757 uart3: serial@1e78e000 778 uart3: serial@1e78e000 {
758 compatible = " 779 compatible = "ns16550a";
759 reg = <0x1e78e 780 reg = <0x1e78e000 0x20>;
760 reg-shift = <2 781 reg-shift = <2>;
761 reg-io-width = 782 reg-io-width = <4>;
762 interrupts = < 783 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
763 clocks = <&sys 784 clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
764 resets = <&lpc 785 resets = <&lpc_reset 6>;
765 no-loopback-te 786 no-loopback-test;
766 pinctrl-names 787 pinctrl-names = "default";
767 pinctrl-0 = <& 788 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
768 status = "disa 789 status = "disabled";
769 }; 790 };
770 791
771 uart4: serial@1e78f000 792 uart4: serial@1e78f000 {
772 compatible = " 793 compatible = "ns16550a";
773 reg = <0x1e78f 794 reg = <0x1e78f000 0x20>;
774 reg-shift = <2 795 reg-shift = <2>;
775 reg-io-width = 796 reg-io-width = <4>;
776 interrupts = < 797 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
777 clocks = <&sys 798 clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
778 resets = <&lpc 799 resets = <&lpc_reset 7>;
779 no-loopback-te 800 no-loopback-test;
780 pinctrl-names 801 pinctrl-names = "default";
781 pinctrl-0 = <& 802 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
782 status = "disa 803 status = "disabled";
783 }; 804 };
784 805
785 uart6: serial@1e790000 806 uart6: serial@1e790000 {
786 compatible = " 807 compatible = "ns16550a";
787 reg = <0x1e790 808 reg = <0x1e790000 0x20>;
788 reg-shift = <2 809 reg-shift = <2>;
789 reg-io-width = 810 reg-io-width = <4>;
790 interrupts = < 811 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
791 clocks = <&sys 812 clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
792 no-loopback-te 813 no-loopback-test;
793 pinctrl-names 814 pinctrl-names = "default";
794 pinctrl-0 = <& 815 pinctrl-0 = <&pinctrl_uart6_default>;
795 816
796 status = "disa 817 status = "disabled";
797 }; 818 };
798 819
799 uart7: serial@1e790100 820 uart7: serial@1e790100 {
800 compatible = " 821 compatible = "ns16550a";
801 reg = <0x1e790 822 reg = <0x1e790100 0x20>;
802 reg-shift = <2 823 reg-shift = <2>;
803 reg-io-width = 824 reg-io-width = <4>;
804 interrupts = < 825 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
805 clocks = <&sys 826 clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
806 no-loopback-te 827 no-loopback-test;
807 pinctrl-names 828 pinctrl-names = "default";
808 pinctrl-0 = <& 829 pinctrl-0 = <&pinctrl_uart7_default>;
809 830
810 status = "disa 831 status = "disabled";
811 }; 832 };
812 833
813 uart8: serial@1e790200 834 uart8: serial@1e790200 {
814 compatible = " 835 compatible = "ns16550a";
815 reg = <0x1e790 836 reg = <0x1e790200 0x20>;
816 reg-shift = <2 837 reg-shift = <2>;
817 reg-io-width = 838 reg-io-width = <4>;
818 interrupts = < 839 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
819 clocks = <&sys 840 clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
820 no-loopback-te 841 no-loopback-test;
821 pinctrl-names 842 pinctrl-names = "default";
822 pinctrl-0 = <& 843 pinctrl-0 = <&pinctrl_uart8_default>;
823 844
824 status = "disa 845 status = "disabled";
825 }; 846 };
826 847
827 uart9: serial@1e790300 848 uart9: serial@1e790300 {
828 compatible = " 849 compatible = "ns16550a";
829 reg = <0x1e790 850 reg = <0x1e790300 0x20>;
830 reg-shift = <2 851 reg-shift = <2>;
831 reg-io-width = 852 reg-io-width = <4>;
832 interrupts = < 853 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
833 clocks = <&sys 854 clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
834 no-loopback-te 855 no-loopback-test;
835 pinctrl-names 856 pinctrl-names = "default";
836 pinctrl-0 = <& 857 pinctrl-0 = <&pinctrl_uart9_default>;
837 858
838 status = "disa 859 status = "disabled";
839 }; 860 };
840 861
841 i2c: bus@1e78a000 { 862 i2c: bus@1e78a000 {
842 compatible = " 863 compatible = "simple-bus";
843 #address-cells 864 #address-cells = <1>;
844 #size-cells = 865 #size-cells = <1>;
845 ranges = <0 0x 866 ranges = <0 0x1e78a000 0x1000>;
846 }; 867 };
847 868
848 fsim0: fsi@1e79b000 { 869 fsim0: fsi@1e79b000 {
849 #interrupt-cel 870 #interrupt-cells = <1>;
850 compatible = " 871 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
851 reg = <0x1e79b 872 reg = <0x1e79b000 0x94>;
852 interrupts = < 873 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
853 pinctrl-names 874 pinctrl-names = "default";
854 pinctrl-0 = <& 875 pinctrl-0 = <&pinctrl_fsi1_default>;
855 clocks = <&sys 876 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
856 interrupt-cont 877 interrupt-controller;
857 status = "disa 878 status = "disabled";
858 }; 879 };
859 880
860 fsim1: fsi@1e79b100 { 881 fsim1: fsi@1e79b100 {
861 #interrupt-cel 882 #interrupt-cells = <1>;
862 compatible = " 883 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
863 reg = <0x1e79b 884 reg = <0x1e79b100 0x94>;
864 interrupts = < 885 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
865 pinctrl-names 886 pinctrl-names = "default";
866 pinctrl-0 = <& 887 pinctrl-0 = <&pinctrl_fsi2_default>;
867 clocks = <&sys 888 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
868 interrupt-cont 889 interrupt-controller;
869 status = "disa 890 status = "disabled";
870 }; 891 };
871 892
872 udma: dma-controller@1 893 udma: dma-controller@1e79e000 {
873 compatible = " 894 compatible = "aspeed,ast2600-udma";
874 reg = <0x1e79e 895 reg = <0x1e79e000 0x1000>;
875 interrupts = < 896 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
876 dma-channels = 897 dma-channels = <28>;
877 #dma-cells = < 898 #dma-cells = <1>;
878 status = "disa 899 status = "disabled";
879 }; 900 };
880 }; 901 };
881 }; 902 };
882 }; 903 };
883 904
884 #include "aspeed-g6-pinctrl.dtsi" 905 #include "aspeed-g6-pinctrl.dtsi"
885 906
886 &i2c { 907 &i2c {
887 i2c0: i2c@80 { !! 908 i2c0: i2c-bus@80 {
888 #address-cells = <1>; 909 #address-cells = <1>;
889 #size-cells = <0>; 910 #size-cells = <0>;
890 reg = <0x80 0x80>; 911 reg = <0x80 0x80>;
891 compatible = "aspeed,ast2600-i 912 compatible = "aspeed,ast2600-i2c-bus";
892 clocks = <&syscon ASPEED_CLK_A 913 clocks = <&syscon ASPEED_CLK_APB2>;
893 resets = <&syscon ASPEED_RESET 914 resets = <&syscon ASPEED_RESET_I2C>;
894 interrupts = <GIC_SPI 110 IRQ_ 915 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
895 bus-frequency = <100000>; 916 bus-frequency = <100000>;
896 pinctrl-names = "default"; 917 pinctrl-names = "default";
897 pinctrl-0 = <&pinctrl_i2c1_def 918 pinctrl-0 = <&pinctrl_i2c1_default>;
898 status = "disabled"; 919 status = "disabled";
899 }; 920 };
900 921
901 i2c1: i2c@100 { !! 922 i2c1: i2c-bus@100 {
902 #address-cells = <1>; 923 #address-cells = <1>;
903 #size-cells = <0>; 924 #size-cells = <0>;
904 reg = <0x100 0x80>; 925 reg = <0x100 0x80>;
905 compatible = "aspeed,ast2600-i 926 compatible = "aspeed,ast2600-i2c-bus";
906 clocks = <&syscon ASPEED_CLK_A 927 clocks = <&syscon ASPEED_CLK_APB2>;
907 resets = <&syscon ASPEED_RESET 928 resets = <&syscon ASPEED_RESET_I2C>;
908 interrupts = <GIC_SPI 111 IRQ_ 929 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
909 bus-frequency = <100000>; 930 bus-frequency = <100000>;
910 pinctrl-names = "default"; 931 pinctrl-names = "default";
911 pinctrl-0 = <&pinctrl_i2c2_def 932 pinctrl-0 = <&pinctrl_i2c2_default>;
912 status = "disabled"; 933 status = "disabled";
913 }; 934 };
914 935
915 i2c2: i2c@180 { !! 936 i2c2: i2c-bus@180 {
916 #address-cells = <1>; 937 #address-cells = <1>;
917 #size-cells = <0>; 938 #size-cells = <0>;
918 reg = <0x180 0x80>; 939 reg = <0x180 0x80>;
919 compatible = "aspeed,ast2600-i 940 compatible = "aspeed,ast2600-i2c-bus";
920 clocks = <&syscon ASPEED_CLK_A 941 clocks = <&syscon ASPEED_CLK_APB2>;
921 resets = <&syscon ASPEED_RESET 942 resets = <&syscon ASPEED_RESET_I2C>;
922 interrupts = <GIC_SPI 112 IRQ_ 943 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
923 bus-frequency = <100000>; 944 bus-frequency = <100000>;
924 pinctrl-names = "default"; 945 pinctrl-names = "default";
925 pinctrl-0 = <&pinctrl_i2c3_def 946 pinctrl-0 = <&pinctrl_i2c3_default>;
926 status = "disabled"; 947 status = "disabled";
927 }; 948 };
928 949
929 i2c3: i2c@200 { !! 950 i2c3: i2c-bus@200 {
930 #address-cells = <1>; 951 #address-cells = <1>;
931 #size-cells = <0>; 952 #size-cells = <0>;
932 reg = <0x200 0x80>; 953 reg = <0x200 0x80>;
933 compatible = "aspeed,ast2600-i 954 compatible = "aspeed,ast2600-i2c-bus";
934 clocks = <&syscon ASPEED_CLK_A 955 clocks = <&syscon ASPEED_CLK_APB2>;
935 resets = <&syscon ASPEED_RESET 956 resets = <&syscon ASPEED_RESET_I2C>;
936 interrupts = <GIC_SPI 113 IRQ_ 957 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
937 bus-frequency = <100000>; 958 bus-frequency = <100000>;
938 pinctrl-names = "default"; 959 pinctrl-names = "default";
939 pinctrl-0 = <&pinctrl_i2c4_def 960 pinctrl-0 = <&pinctrl_i2c4_default>;
940 status = "disabled"; 961 status = "disabled";
941 }; 962 };
942 963
943 i2c4: i2c@280 { !! 964 i2c4: i2c-bus@280 {
944 #address-cells = <1>; 965 #address-cells = <1>;
945 #size-cells = <0>; 966 #size-cells = <0>;
946 reg = <0x280 0x80>; 967 reg = <0x280 0x80>;
947 compatible = "aspeed,ast2600-i 968 compatible = "aspeed,ast2600-i2c-bus";
948 clocks = <&syscon ASPEED_CLK_A 969 clocks = <&syscon ASPEED_CLK_APB2>;
949 resets = <&syscon ASPEED_RESET 970 resets = <&syscon ASPEED_RESET_I2C>;
950 interrupts = <GIC_SPI 114 IRQ_ 971 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
951 bus-frequency = <100000>; 972 bus-frequency = <100000>;
952 pinctrl-names = "default"; 973 pinctrl-names = "default";
953 pinctrl-0 = <&pinctrl_i2c5_def 974 pinctrl-0 = <&pinctrl_i2c5_default>;
954 status = "disabled"; 975 status = "disabled";
955 }; 976 };
956 977
957 i2c5: i2c@300 { !! 978 i2c5: i2c-bus@300 {
958 #address-cells = <1>; 979 #address-cells = <1>;
959 #size-cells = <0>; 980 #size-cells = <0>;
960 reg = <0x300 0x80>; 981 reg = <0x300 0x80>;
961 compatible = "aspeed,ast2600-i 982 compatible = "aspeed,ast2600-i2c-bus";
962 clocks = <&syscon ASPEED_CLK_A 983 clocks = <&syscon ASPEED_CLK_APB2>;
963 resets = <&syscon ASPEED_RESET 984 resets = <&syscon ASPEED_RESET_I2C>;
964 interrupts = <GIC_SPI 115 IRQ_ 985 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
965 bus-frequency = <100000>; 986 bus-frequency = <100000>;
966 pinctrl-names = "default"; 987 pinctrl-names = "default";
967 pinctrl-0 = <&pinctrl_i2c6_def 988 pinctrl-0 = <&pinctrl_i2c6_default>;
968 status = "disabled"; 989 status = "disabled";
969 }; 990 };
970 991
971 i2c6: i2c@380 { !! 992 i2c6: i2c-bus@380 {
972 #address-cells = <1>; 993 #address-cells = <1>;
973 #size-cells = <0>; 994 #size-cells = <0>;
974 reg = <0x380 0x80>; 995 reg = <0x380 0x80>;
975 compatible = "aspeed,ast2600-i 996 compatible = "aspeed,ast2600-i2c-bus";
976 clocks = <&syscon ASPEED_CLK_A 997 clocks = <&syscon ASPEED_CLK_APB2>;
977 resets = <&syscon ASPEED_RESET 998 resets = <&syscon ASPEED_RESET_I2C>;
978 interrupts = <GIC_SPI 116 IRQ_ 999 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
979 bus-frequency = <100000>; 1000 bus-frequency = <100000>;
980 pinctrl-names = "default"; 1001 pinctrl-names = "default";
981 pinctrl-0 = <&pinctrl_i2c7_def 1002 pinctrl-0 = <&pinctrl_i2c7_default>;
982 status = "disabled"; 1003 status = "disabled";
983 }; 1004 };
984 1005
985 i2c7: i2c@400 { !! 1006 i2c7: i2c-bus@400 {
986 #address-cells = <1>; 1007 #address-cells = <1>;
987 #size-cells = <0>; 1008 #size-cells = <0>;
988 reg = <0x400 0x80>; 1009 reg = <0x400 0x80>;
989 compatible = "aspeed,ast2600-i 1010 compatible = "aspeed,ast2600-i2c-bus";
990 clocks = <&syscon ASPEED_CLK_A 1011 clocks = <&syscon ASPEED_CLK_APB2>;
991 resets = <&syscon ASPEED_RESET 1012 resets = <&syscon ASPEED_RESET_I2C>;
992 interrupts = <GIC_SPI 117 IRQ_ 1013 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
993 bus-frequency = <100000>; 1014 bus-frequency = <100000>;
994 pinctrl-names = "default"; 1015 pinctrl-names = "default";
995 pinctrl-0 = <&pinctrl_i2c8_def 1016 pinctrl-0 = <&pinctrl_i2c8_default>;
996 status = "disabled"; 1017 status = "disabled";
997 }; 1018 };
998 1019
999 i2c8: i2c@480 { !! 1020 i2c8: i2c-bus@480 {
1000 #address-cells = <1>; 1021 #address-cells = <1>;
1001 #size-cells = <0>; 1022 #size-cells = <0>;
1002 reg = <0x480 0x80>; 1023 reg = <0x480 0x80>;
1003 compatible = "aspeed,ast2600- 1024 compatible = "aspeed,ast2600-i2c-bus";
1004 clocks = <&syscon ASPEED_CLK_ 1025 clocks = <&syscon ASPEED_CLK_APB2>;
1005 resets = <&syscon ASPEED_RESE 1026 resets = <&syscon ASPEED_RESET_I2C>;
1006 interrupts = <GIC_SPI 118 IRQ 1027 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
1007 bus-frequency = <100000>; 1028 bus-frequency = <100000>;
1008 pinctrl-names = "default"; 1029 pinctrl-names = "default";
1009 pinctrl-0 = <&pinctrl_i2c9_de 1030 pinctrl-0 = <&pinctrl_i2c9_default>;
1010 status = "disabled"; 1031 status = "disabled";
1011 }; 1032 };
1012 1033
1013 i2c9: i2c@500 { !! 1034 i2c9: i2c-bus@500 {
1014 #address-cells = <1>; 1035 #address-cells = <1>;
1015 #size-cells = <0>; 1036 #size-cells = <0>;
1016 reg = <0x500 0x80>; 1037 reg = <0x500 0x80>;
1017 compatible = "aspeed,ast2600- 1038 compatible = "aspeed,ast2600-i2c-bus";
1018 clocks = <&syscon ASPEED_CLK_ 1039 clocks = <&syscon ASPEED_CLK_APB2>;
1019 resets = <&syscon ASPEED_RESE 1040 resets = <&syscon ASPEED_RESET_I2C>;
1020 interrupts = <GIC_SPI 119 IRQ 1041 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
1021 bus-frequency = <100000>; 1042 bus-frequency = <100000>;
1022 pinctrl-names = "default"; 1043 pinctrl-names = "default";
1023 pinctrl-0 = <&pinctrl_i2c10_d 1044 pinctrl-0 = <&pinctrl_i2c10_default>;
1024 status = "disabled"; 1045 status = "disabled";
1025 }; 1046 };
1026 1047
1027 i2c10: i2c@580 { !! 1048 i2c10: i2c-bus@580 {
1028 #address-cells = <1>; 1049 #address-cells = <1>;
1029 #size-cells = <0>; 1050 #size-cells = <0>;
1030 reg = <0x580 0x80>; 1051 reg = <0x580 0x80>;
1031 compatible = "aspeed,ast2600- 1052 compatible = "aspeed,ast2600-i2c-bus";
1032 clocks = <&syscon ASPEED_CLK_ 1053 clocks = <&syscon ASPEED_CLK_APB2>;
1033 resets = <&syscon ASPEED_RESE 1054 resets = <&syscon ASPEED_RESET_I2C>;
1034 interrupts = <GIC_SPI 120 IRQ 1055 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1035 bus-frequency = <100000>; 1056 bus-frequency = <100000>;
1036 pinctrl-names = "default"; 1057 pinctrl-names = "default";
1037 pinctrl-0 = <&pinctrl_i2c11_d 1058 pinctrl-0 = <&pinctrl_i2c11_default>;
1038 status = "disabled"; 1059 status = "disabled";
1039 }; 1060 };
1040 1061
1041 i2c11: i2c@600 { !! 1062 i2c11: i2c-bus@600 {
1042 #address-cells = <1>; 1063 #address-cells = <1>;
1043 #size-cells = <0>; 1064 #size-cells = <0>;
1044 reg = <0x600 0x80>; 1065 reg = <0x600 0x80>;
1045 compatible = "aspeed,ast2600- 1066 compatible = "aspeed,ast2600-i2c-bus";
1046 clocks = <&syscon ASPEED_CLK_ 1067 clocks = <&syscon ASPEED_CLK_APB2>;
1047 resets = <&syscon ASPEED_RESE 1068 resets = <&syscon ASPEED_RESET_I2C>;
1048 interrupts = <GIC_SPI 121 IRQ 1069 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1049 bus-frequency = <100000>; 1070 bus-frequency = <100000>;
1050 pinctrl-names = "default"; 1071 pinctrl-names = "default";
1051 pinctrl-0 = <&pinctrl_i2c12_d 1072 pinctrl-0 = <&pinctrl_i2c12_default>;
1052 status = "disabled"; 1073 status = "disabled";
1053 }; 1074 };
1054 1075
1055 i2c12: i2c@680 { !! 1076 i2c12: i2c-bus@680 {
1056 #address-cells = <1>; 1077 #address-cells = <1>;
1057 #size-cells = <0>; 1078 #size-cells = <0>;
1058 reg = <0x680 0x80>; 1079 reg = <0x680 0x80>;
1059 compatible = "aspeed,ast2600- 1080 compatible = "aspeed,ast2600-i2c-bus";
1060 clocks = <&syscon ASPEED_CLK_ 1081 clocks = <&syscon ASPEED_CLK_APB2>;
1061 resets = <&syscon ASPEED_RESE 1082 resets = <&syscon ASPEED_RESET_I2C>;
1062 interrupts = <GIC_SPI 122 IRQ 1083 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1063 bus-frequency = <100000>; 1084 bus-frequency = <100000>;
1064 pinctrl-names = "default"; 1085 pinctrl-names = "default";
1065 pinctrl-0 = <&pinctrl_i2c13_d 1086 pinctrl-0 = <&pinctrl_i2c13_default>;
1066 status = "disabled"; 1087 status = "disabled";
1067 }; 1088 };
1068 1089
1069 i2c13: i2c@700 { !! 1090 i2c13: i2c-bus@700 {
1070 #address-cells = <1>; 1091 #address-cells = <1>;
1071 #size-cells = <0>; 1092 #size-cells = <0>;
1072 reg = <0x700 0x80>; 1093 reg = <0x700 0x80>;
1073 compatible = "aspeed,ast2600- 1094 compatible = "aspeed,ast2600-i2c-bus";
1074 clocks = <&syscon ASPEED_CLK_ 1095 clocks = <&syscon ASPEED_CLK_APB2>;
1075 resets = <&syscon ASPEED_RESE 1096 resets = <&syscon ASPEED_RESET_I2C>;
1076 interrupts = <GIC_SPI 123 IRQ 1097 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1077 bus-frequency = <100000>; 1098 bus-frequency = <100000>;
1078 pinctrl-names = "default"; 1099 pinctrl-names = "default";
1079 pinctrl-0 = <&pinctrl_i2c14_d 1100 pinctrl-0 = <&pinctrl_i2c14_default>;
1080 status = "disabled"; 1101 status = "disabled";
1081 }; 1102 };
1082 1103
1083 i2c14: i2c@780 { !! 1104 i2c14: i2c-bus@780 {
1084 #address-cells = <1>; 1105 #address-cells = <1>;
1085 #size-cells = <0>; 1106 #size-cells = <0>;
1086 reg = <0x780 0x80>; 1107 reg = <0x780 0x80>;
1087 compatible = "aspeed,ast2600- 1108 compatible = "aspeed,ast2600-i2c-bus";
1088 clocks = <&syscon ASPEED_CLK_ 1109 clocks = <&syscon ASPEED_CLK_APB2>;
1089 resets = <&syscon ASPEED_RESE 1110 resets = <&syscon ASPEED_RESET_I2C>;
1090 interrupts = <GIC_SPI 124 IRQ 1111 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
1091 bus-frequency = <100000>; 1112 bus-frequency = <100000>;
1092 pinctrl-names = "default"; 1113 pinctrl-names = "default";
1093 pinctrl-0 = <&pinctrl_i2c15_d 1114 pinctrl-0 = <&pinctrl_i2c15_default>;
1094 status = "disabled"; 1115 status = "disabled";
1095 }; 1116 };
1096 1117
1097 i2c15: i2c@800 { !! 1118 i2c15: i2c-bus@800 {
1098 #address-cells = <1>; 1119 #address-cells = <1>;
1099 #size-cells = <0>; 1120 #size-cells = <0>;
1100 reg = <0x800 0x80>; 1121 reg = <0x800 0x80>;
1101 compatible = "aspeed,ast2600- 1122 compatible = "aspeed,ast2600-i2c-bus";
1102 clocks = <&syscon ASPEED_CLK_ 1123 clocks = <&syscon ASPEED_CLK_APB2>;
1103 resets = <&syscon ASPEED_RESE 1124 resets = <&syscon ASPEED_RESET_I2C>;
1104 interrupts = <GIC_SPI 125 IRQ 1125 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
1105 bus-frequency = <100000>; 1126 bus-frequency = <100000>;
1106 pinctrl-names = "default"; 1127 pinctrl-names = "default";
1107 pinctrl-0 = <&pinctrl_i2c16_d 1128 pinctrl-0 = <&pinctrl_i2c16_default>;
1108 status = "disabled"; 1129 status = "disabled";
1109 }; 1130 };
1110 }; 1131 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.