1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 #include "bcm283x.dtsi" 2 #include "bcm283x.dtsi"
3 3
4 #include <dt-bindings/interrupt-controller/arm 4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/soc/bcm2835-pm.h> 5 #include <dt-bindings/soc/bcm2835-pm.h>
6 6
7 / { 7 / {
8 compatible = "brcm,bcm2711"; 8 compatible = "brcm,bcm2711";
9 9
10 #address-cells = <2>; 10 #address-cells = <2>;
11 #size-cells = <1>; 11 #size-cells = <1>;
12 12
13 interrupt-parent = <&gicv2>; 13 interrupt-parent = <&gicv2>;
14 14
15 vc4: gpu { 15 vc4: gpu {
16 compatible = "brcm,bcm2711-vc5 16 compatible = "brcm,bcm2711-vc5";
17 status = "disabled"; 17 status = "disabled";
18 }; 18 };
19 19
20 clk_27MHz: clk-27M { 20 clk_27MHz: clk-27M {
21 #clock-cells = <0>; 21 #clock-cells = <0>;
22 compatible = "fixed-clock"; 22 compatible = "fixed-clock";
23 clock-frequency = <27000000>; 23 clock-frequency = <27000000>;
24 clock-output-names = "27MHz-cl 24 clock-output-names = "27MHz-clock";
25 }; 25 };
26 26
27 clk_108MHz: clk-108M { 27 clk_108MHz: clk-108M {
28 #clock-cells = <0>; 28 #clock-cells = <0>;
29 compatible = "fixed-clock"; 29 compatible = "fixed-clock";
30 clock-frequency = <108000000>; 30 clock-frequency = <108000000>;
31 clock-output-names = "108MHz-c 31 clock-output-names = "108MHz-clock";
32 }; 32 };
33 33
34 soc { 34 soc {
35 /* 35 /*
36 * Defined ranges: 36 * Defined ranges:
37 * Common BCM283x peripheral 37 * Common BCM283x peripherals
38 * BCM2711-specific peripher 38 * BCM2711-specific peripherals
39 * ARM-local peripherals 39 * ARM-local peripherals
40 */ 40 */
41 ranges = <0x7e000000 0x0 0xfe 41 ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
42 <0x7c000000 0x0 0xfc 42 <0x7c000000 0x0 0xfc000000 0x02000000>,
43 <0x40000000 0x0 0xff 43 <0x40000000 0x0 0xff800000 0x00800000>;
44 /* Emulate a contiguous 30-bit 44 /* Emulate a contiguous 30-bit address range for DMA */
45 dma-ranges = <0xc0000000 0x0 45 dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
46 46
47 /* 47 /*
48 * This node is the provider f 48 * This node is the provider for the enable-method for
49 * bringing up secondary cores 49 * bringing up secondary cores.
50 */ 50 */
51 local_intc: interrupt-controll 51 local_intc: interrupt-controller@40000000 {
52 compatible = "brcm,bcm 52 compatible = "brcm,bcm2836-l1-intc";
53 reg = <0x40000000 0x10 53 reg = <0x40000000 0x100>;
54 }; 54 };
55 55
56 gicv2: interrupt-controller@40 56 gicv2: interrupt-controller@40041000 {
57 interrupt-controller; 57 interrupt-controller;
58 #interrupt-cells = <3> 58 #interrupt-cells = <3>;
59 compatible = "arm,gic- 59 compatible = "arm,gic-400";
60 reg = <0x40041000 0x 60 reg = <0x40041000 0x1000>,
61 <0x40042000 0x 61 <0x40042000 0x2000>,
62 <0x40044000 0x 62 <0x40044000 0x2000>,
63 <0x40046000 0x 63 <0x40046000 0x2000>;
64 interrupts = <GIC_PPI 64 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
65 65 IRQ_TYPE_LEVEL_HIGH)>;
66 }; 66 };
67 67
68 avs_monitor: avs-monitor@7d5d2 68 avs_monitor: avs-monitor@7d5d2000 {
69 compatible = "brcm,bcm 69 compatible = "brcm,bcm2711-avs-monitor",
70 "syscon", 70 "syscon", "simple-mfd";
71 reg = <0x7d5d2000 0xf0 71 reg = <0x7d5d2000 0xf00>;
72 72
73 thermal: thermal { 73 thermal: thermal {
74 compatible = " 74 compatible = "brcm,bcm2711-thermal";
75 #thermal-senso 75 #thermal-sensor-cells = <0>;
76 }; 76 };
77 }; 77 };
78 78
79 dma: dma-controller@7e007000 { 79 dma: dma-controller@7e007000 {
80 compatible = "brcm,bcm 80 compatible = "brcm,bcm2835-dma";
81 reg = <0x7e007000 0xb0 81 reg = <0x7e007000 0xb00>;
82 interrupts = <GIC_SPI 82 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
83 <GIC_SPI 83 <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
84 <GIC_SPI 84 <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
85 <GIC_SPI 85 <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
86 <GIC_SPI 86 <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
87 <GIC_SPI 87 <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
88 <GIC_SPI 88 <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
89 /* DMA li 89 /* DMA lite 7 - 10 */
90 <GIC_SPI 90 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
91 <GIC_SPI 91 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
92 <GIC_SPI 92 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
93 <GIC_SPI 93 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
94 interrupt-names = "dma 94 interrupt-names = "dma0",
95 "dma 95 "dma1",
96 "dma 96 "dma2",
97 "dma 97 "dma3",
98 "dma 98 "dma4",
99 "dma 99 "dma5",
100 "dma 100 "dma6",
101 "dma 101 "dma7",
102 "dma 102 "dma8",
103 "dma 103 "dma9",
104 "dma 104 "dma10";
105 #dma-cells = <1>; 105 #dma-cells = <1>;
106 brcm,dma-channel-mask 106 brcm,dma-channel-mask = <0x07f5>;
107 }; 107 };
108 108
109 pm: watchdog@7e100000 { 109 pm: watchdog@7e100000 {
110 compatible = "brcm,bcm 110 compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
111 #power-domain-cells = 111 #power-domain-cells = <1>;
112 #reset-cells = <1>; 112 #reset-cells = <1>;
113 reg = <0x7e100000 0x11 113 reg = <0x7e100000 0x114>,
114 <0x7e00a000 0x24 114 <0x7e00a000 0x24>,
115 <0x7ec11000 0x20 115 <0x7ec11000 0x20>;
116 reg-names = "pm", "asb 116 reg-names = "pm", "asb", "rpivid_asb";
117 clocks = <&clocks BCM2 117 clocks = <&clocks BCM2835_CLOCK_V3D>,
118 <&clocks BCM2 118 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
119 <&clocks BCM2 119 <&clocks BCM2835_CLOCK_H264>,
120 <&clocks BCM2 120 <&clocks BCM2835_CLOCK_ISP>;
121 clock-names = "v3d", " 121 clock-names = "v3d", "peri_image", "h264", "isp";
122 system-power-controlle 122 system-power-controller;
123 }; 123 };
124 124
125 rng@7e104000 { 125 rng@7e104000 {
126 compatible = "brcm,bcm 126 compatible = "brcm,bcm2711-rng200";
127 reg = <0x7e104000 0x28 127 reg = <0x7e104000 0x28>;
128 }; 128 };
129 129
130 uart2: serial@7e201400 { 130 uart2: serial@7e201400 {
131 compatible = "arm,pl01 131 compatible = "arm,pl011", "arm,primecell";
132 reg = <0x7e201400 0x20 132 reg = <0x7e201400 0x200>;
133 interrupts = <GIC_SPI 133 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
134 clocks = <&clocks BCM2 134 clocks = <&clocks BCM2835_CLOCK_UART>,
135 <&clocks BCM2 135 <&clocks BCM2835_CLOCK_VPU>;
136 clock-names = "uartclk 136 clock-names = "uartclk", "apb_pclk";
137 arm,primecell-periphid 137 arm,primecell-periphid = <0x00241011>;
138 status = "disabled"; 138 status = "disabled";
139 }; 139 };
140 140
141 uart3: serial@7e201600 { 141 uart3: serial@7e201600 {
142 compatible = "arm,pl01 142 compatible = "arm,pl011", "arm,primecell";
143 reg = <0x7e201600 0x20 143 reg = <0x7e201600 0x200>;
144 interrupts = <GIC_SPI 144 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
145 clocks = <&clocks BCM2 145 clocks = <&clocks BCM2835_CLOCK_UART>,
146 <&clocks BCM2 146 <&clocks BCM2835_CLOCK_VPU>;
147 clock-names = "uartclk 147 clock-names = "uartclk", "apb_pclk";
148 arm,primecell-periphid 148 arm,primecell-periphid = <0x00241011>;
149 status = "disabled"; 149 status = "disabled";
150 }; 150 };
151 151
152 uart4: serial@7e201800 { 152 uart4: serial@7e201800 {
153 compatible = "arm,pl01 153 compatible = "arm,pl011", "arm,primecell";
154 reg = <0x7e201800 0x20 154 reg = <0x7e201800 0x200>;
155 interrupts = <GIC_SPI 155 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
156 clocks = <&clocks BCM2 156 clocks = <&clocks BCM2835_CLOCK_UART>,
157 <&clocks BCM2 157 <&clocks BCM2835_CLOCK_VPU>;
158 clock-names = "uartclk 158 clock-names = "uartclk", "apb_pclk";
159 arm,primecell-periphid 159 arm,primecell-periphid = <0x00241011>;
160 status = "disabled"; 160 status = "disabled";
161 }; 161 };
162 162
163 uart5: serial@7e201a00 { 163 uart5: serial@7e201a00 {
164 compatible = "arm,pl01 164 compatible = "arm,pl011", "arm,primecell";
165 reg = <0x7e201a00 0x20 165 reg = <0x7e201a00 0x200>;
166 interrupts = <GIC_SPI 166 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
167 clocks = <&clocks BCM2 167 clocks = <&clocks BCM2835_CLOCK_UART>,
168 <&clocks BCM2 168 <&clocks BCM2835_CLOCK_VPU>;
169 clock-names = "uartclk 169 clock-names = "uartclk", "apb_pclk";
170 arm,primecell-periphid 170 arm,primecell-periphid = <0x00241011>;
171 status = "disabled"; 171 status = "disabled";
172 }; 172 };
173 173
174 spi3: spi@7e204600 { 174 spi3: spi@7e204600 {
175 compatible = "brcm,bcm 175 compatible = "brcm,bcm2835-spi";
176 reg = <0x7e204600 0x02 176 reg = <0x7e204600 0x0200>;
177 interrupts = <GIC_SPI 177 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
178 clocks = <&clocks BCM2 178 clocks = <&clocks BCM2835_CLOCK_VPU>;
179 #address-cells = <1>; 179 #address-cells = <1>;
180 #size-cells = <0>; 180 #size-cells = <0>;
181 status = "disabled"; 181 status = "disabled";
182 }; 182 };
183 183
184 spi4: spi@7e204800 { 184 spi4: spi@7e204800 {
185 compatible = "brcm,bcm 185 compatible = "brcm,bcm2835-spi";
186 reg = <0x7e204800 0x02 186 reg = <0x7e204800 0x0200>;
187 interrupts = <GIC_SPI 187 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
188 clocks = <&clocks BCM2 188 clocks = <&clocks BCM2835_CLOCK_VPU>;
189 #address-cells = <1>; 189 #address-cells = <1>;
190 #size-cells = <0>; 190 #size-cells = <0>;
191 status = "disabled"; 191 status = "disabled";
192 }; 192 };
193 193
194 spi5: spi@7e204a00 { 194 spi5: spi@7e204a00 {
195 compatible = "brcm,bcm 195 compatible = "brcm,bcm2835-spi";
196 reg = <0x7e204a00 0x02 196 reg = <0x7e204a00 0x0200>;
197 interrupts = <GIC_SPI 197 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
198 clocks = <&clocks BCM2 198 clocks = <&clocks BCM2835_CLOCK_VPU>;
199 #address-cells = <1>; 199 #address-cells = <1>;
200 #size-cells = <0>; 200 #size-cells = <0>;
201 status = "disabled"; 201 status = "disabled";
202 }; 202 };
203 203
204 spi6: spi@7e204c00 { 204 spi6: spi@7e204c00 {
205 compatible = "brcm,bcm 205 compatible = "brcm,bcm2835-spi";
206 reg = <0x7e204c00 0x02 206 reg = <0x7e204c00 0x0200>;
207 interrupts = <GIC_SPI 207 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
208 clocks = <&clocks BCM2 208 clocks = <&clocks BCM2835_CLOCK_VPU>;
209 #address-cells = <1>; 209 #address-cells = <1>;
210 #size-cells = <0>; 210 #size-cells = <0>;
211 status = "disabled"; 211 status = "disabled";
212 }; 212 };
213 213
214 i2c3: i2c@7e205600 { 214 i2c3: i2c@7e205600 {
215 compatible = "brcm,bcm 215 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
216 reg = <0x7e205600 0x20 216 reg = <0x7e205600 0x200>;
217 interrupts = <GIC_SPI 217 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
218 clocks = <&clocks BCM2 218 clocks = <&clocks BCM2835_CLOCK_VPU>;
219 #address-cells = <1>; 219 #address-cells = <1>;
220 #size-cells = <0>; 220 #size-cells = <0>;
221 status = "disabled"; 221 status = "disabled";
222 }; 222 };
223 223
224 i2c4: i2c@7e205800 { 224 i2c4: i2c@7e205800 {
225 compatible = "brcm,bcm 225 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
226 reg = <0x7e205800 0x20 226 reg = <0x7e205800 0x200>;
227 interrupts = <GIC_SPI 227 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
228 clocks = <&clocks BCM2 228 clocks = <&clocks BCM2835_CLOCK_VPU>;
229 #address-cells = <1>; 229 #address-cells = <1>;
230 #size-cells = <0>; 230 #size-cells = <0>;
231 status = "disabled"; 231 status = "disabled";
232 }; 232 };
233 233
234 i2c5: i2c@7e205a00 { 234 i2c5: i2c@7e205a00 {
235 compatible = "brcm,bcm 235 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
236 reg = <0x7e205a00 0x20 236 reg = <0x7e205a00 0x200>;
237 interrupts = <GIC_SPI 237 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
238 clocks = <&clocks BCM2 238 clocks = <&clocks BCM2835_CLOCK_VPU>;
239 #address-cells = <1>; 239 #address-cells = <1>;
240 #size-cells = <0>; 240 #size-cells = <0>;
241 status = "disabled"; 241 status = "disabled";
242 }; 242 };
243 243
244 i2c6: i2c@7e205c00 { 244 i2c6: i2c@7e205c00 {
245 compatible = "brcm,bcm 245 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
246 reg = <0x7e205c00 0x20 246 reg = <0x7e205c00 0x200>;
247 interrupts = <GIC_SPI 247 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
248 clocks = <&clocks BCM2 248 clocks = <&clocks BCM2835_CLOCK_VPU>;
249 #address-cells = <1>; 249 #address-cells = <1>;
250 #size-cells = <0>; 250 #size-cells = <0>;
251 status = "disabled"; 251 status = "disabled";
252 }; 252 };
253 253
254 pixelvalve0: pixelvalve@7e2060 254 pixelvalve0: pixelvalve@7e206000 {
255 compatible = "brcm,bcm 255 compatible = "brcm,bcm2711-pixelvalve0";
256 reg = <0x7e206000 0x10 256 reg = <0x7e206000 0x100>;
257 interrupts = <GIC_SPI 257 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
258 status = "disabled"; 258 status = "disabled";
259 }; 259 };
260 260
261 pixelvalve1: pixelvalve@7e2070 261 pixelvalve1: pixelvalve@7e207000 {
262 compatible = "brcm,bcm 262 compatible = "brcm,bcm2711-pixelvalve1";
263 reg = <0x7e207000 0x10 263 reg = <0x7e207000 0x100>;
264 interrupts = <GIC_SPI 264 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
265 status = "disabled"; 265 status = "disabled";
266 }; 266 };
267 267
268 pixelvalve2: pixelvalve@7e20a0 268 pixelvalve2: pixelvalve@7e20a000 {
269 compatible = "brcm,bcm 269 compatible = "brcm,bcm2711-pixelvalve2";
270 reg = <0x7e20a000 0x10 270 reg = <0x7e20a000 0x100>;
271 interrupts = <GIC_SPI 271 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
272 status = "disabled"; 272 status = "disabled";
273 }; 273 };
274 274
275 pwm1: pwm@7e20c800 { 275 pwm1: pwm@7e20c800 {
276 compatible = "brcm,bcm 276 compatible = "brcm,bcm2835-pwm";
277 reg = <0x7e20c800 0x28 277 reg = <0x7e20c800 0x28>;
278 clocks = <&clocks BCM2 278 clocks = <&clocks BCM2835_CLOCK_PWM>;
279 assigned-clocks = <&cl 279 assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
280 assigned-clock-rates = 280 assigned-clock-rates = <10000000>;
281 #pwm-cells = <3>; 281 #pwm-cells = <3>;
282 status = "disabled"; 282 status = "disabled";
283 }; 283 };
284 284
285 pixelvalve4: pixelvalve@7e2160 285 pixelvalve4: pixelvalve@7e216000 {
286 compatible = "brcm,bcm 286 compatible = "brcm,bcm2711-pixelvalve4";
287 reg = <0x7e216000 0x10 287 reg = <0x7e216000 0x100>;
288 interrupts = <GIC_SPI 288 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
289 status = "disabled"; 289 status = "disabled";
290 }; 290 };
291 291
292 hvs: hvs@7e400000 { 292 hvs: hvs@7e400000 {
293 compatible = "brcm,bcm 293 compatible = "brcm,bcm2711-hvs";
294 reg = <0x7e400000 0x80 294 reg = <0x7e400000 0x8000>;
295 interrupts = <GIC_SPI 295 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
296 }; 296 };
297 297
298 pixelvalve3: pixelvalve@7ec120 298 pixelvalve3: pixelvalve@7ec12000 {
299 compatible = "brcm,bcm 299 compatible = "brcm,bcm2711-pixelvalve3";
300 reg = <0x7ec12000 0x10 300 reg = <0x7ec12000 0x100>;
301 interrupts = <GIC_SPI 301 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
302 status = "disabled"; 302 status = "disabled";
303 }; 303 };
304 304
305 vec: vec@7ec13000 { 305 vec: vec@7ec13000 {
306 compatible = "brcm,bcm 306 compatible = "brcm,bcm2711-vec";
307 reg = <0x7ec13000 0x10 307 reg = <0x7ec13000 0x1000>;
308 clocks = <&clocks BCM2 308 clocks = <&clocks BCM2835_CLOCK_VEC>;
309 interrupts = <GIC_SPI 309 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
310 status = "disabled"; 310 status = "disabled";
311 }; 311 };
312 312
313 dvp: clock@7ef00000 { 313 dvp: clock@7ef00000 {
314 compatible = "brcm,brc 314 compatible = "brcm,brcm2711-dvp";
315 reg = <0x7ef00000 0x10 315 reg = <0x7ef00000 0x10>;
316 clocks = <&clk_108MHz> 316 clocks = <&clk_108MHz>;
317 #clock-cells = <1>; 317 #clock-cells = <1>;
318 #reset-cells = <1>; 318 #reset-cells = <1>;
319 }; 319 };
320 320
321 aon_intr: interrupt-controller 321 aon_intr: interrupt-controller@7ef00100 {
322 compatible = "brcm,bcm 322 compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
323 reg = <0x7ef00100 0x30 323 reg = <0x7ef00100 0x30>;
324 interrupts = <GIC_SPI 324 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
325 interrupt-controller; 325 interrupt-controller;
326 #interrupt-cells = <1> 326 #interrupt-cells = <1>;
327 }; 327 };
328 328
329 hdmi0: hdmi@7ef00700 { 329 hdmi0: hdmi@7ef00700 {
330 compatible = "brcm,bcm 330 compatible = "brcm,bcm2711-hdmi0";
331 reg = <0x7ef00700 0x30 331 reg = <0x7ef00700 0x300>,
332 <0x7ef00300 0x20 332 <0x7ef00300 0x200>,
333 <0x7ef00f00 0x80 333 <0x7ef00f00 0x80>,
334 <0x7ef00f80 0x80 334 <0x7ef00f80 0x80>,
335 <0x7ef01b00 0x20 335 <0x7ef01b00 0x200>,
336 <0x7ef01f00 0x40 336 <0x7ef01f00 0x400>,
337 <0x7ef00200 0x80 337 <0x7ef00200 0x80>,
338 <0x7ef04300 0x10 338 <0x7ef04300 0x100>,
339 <0x7ef20000 0x10 339 <0x7ef20000 0x100>;
340 reg-names = "hdmi", 340 reg-names = "hdmi",
341 "dvp", 341 "dvp",
342 "phy", 342 "phy",
343 "rm", 343 "rm",
344 "packet", 344 "packet",
345 "metadata" 345 "metadata",
346 "csc", 346 "csc",
347 "cec", 347 "cec",
348 "hd"; 348 "hd";
349 clock-names = "hdmi", 349 clock-names = "hdmi", "bvb", "audio", "cec";
350 resets = <&dvp 0>; 350 resets = <&dvp 0>;
351 interrupt-parent = <&a 351 interrupt-parent = <&aon_intr>;
352 interrupts = <0>, <1>, 352 interrupts = <0>, <1>, <2>,
353 <3>, <4>, 353 <3>, <4>, <5>;
354 interrupt-names = "cec 354 interrupt-names = "cec-tx", "cec-rx", "cec-low",
355 "wak 355 "wakeup", "hpd-connected", "hpd-removed";
356 ddc = <&ddc0>; 356 ddc = <&ddc0>;
357 dmas = <&dma 10>; 357 dmas = <&dma 10>;
358 dma-names = "audio-rx" 358 dma-names = "audio-rx";
359 status = "disabled"; 359 status = "disabled";
360 }; 360 };
361 361
362 ddc0: i2c@7ef04500 { 362 ddc0: i2c@7ef04500 {
363 compatible = "brcm,bcm 363 compatible = "brcm,bcm2711-hdmi-i2c";
364 reg = <0x7ef04500 0x10 364 reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
365 reg-names = "bsc", "au 365 reg-names = "bsc", "auto-i2c";
366 clock-frequency = <975 366 clock-frequency = <97500>;
367 status = "disabled"; 367 status = "disabled";
368 }; 368 };
369 369
370 hdmi1: hdmi@7ef05700 { 370 hdmi1: hdmi@7ef05700 {
371 compatible = "brcm,bcm 371 compatible = "brcm,bcm2711-hdmi1";
372 reg = <0x7ef05700 0x30 372 reg = <0x7ef05700 0x300>,
373 <0x7ef05300 0x20 373 <0x7ef05300 0x200>,
374 <0x7ef05f00 0x80 374 <0x7ef05f00 0x80>,
375 <0x7ef05f80 0x80 375 <0x7ef05f80 0x80>,
376 <0x7ef06b00 0x20 376 <0x7ef06b00 0x200>,
377 <0x7ef06f00 0x40 377 <0x7ef06f00 0x400>,
378 <0x7ef00280 0x80 378 <0x7ef00280 0x80>,
379 <0x7ef09300 0x10 379 <0x7ef09300 0x100>,
380 <0x7ef20000 0x10 380 <0x7ef20000 0x100>;
381 reg-names = "hdmi", 381 reg-names = "hdmi",
382 "dvp", 382 "dvp",
383 "phy", 383 "phy",
384 "rm", 384 "rm",
385 "packet", 385 "packet",
386 "metadata" 386 "metadata",
387 "csc", 387 "csc",
388 "cec", 388 "cec",
389 "hd"; 389 "hd";
390 ddc = <&ddc1>; 390 ddc = <&ddc1>;
391 clock-names = "hdmi", 391 clock-names = "hdmi", "bvb", "audio", "cec";
392 resets = <&dvp 1>; 392 resets = <&dvp 1>;
393 interrupt-parent = <&a 393 interrupt-parent = <&aon_intr>;
394 interrupts = <8>, <7>, 394 interrupts = <8>, <7>, <6>,
395 <9>, <10> 395 <9>, <10>, <11>;
396 interrupt-names = "cec 396 interrupt-names = "cec-tx", "cec-rx", "cec-low",
397 "wak 397 "wakeup", "hpd-connected", "hpd-removed";
398 dmas = <&dma 17>; 398 dmas = <&dma 17>;
399 dma-names = "audio-rx" 399 dma-names = "audio-rx";
400 status = "disabled"; 400 status = "disabled";
401 }; 401 };
402 402
403 ddc1: i2c@7ef09500 { 403 ddc1: i2c@7ef09500 {
404 compatible = "brcm,bcm 404 compatible = "brcm,bcm2711-hdmi-i2c";
405 reg = <0x7ef09500 0x10 405 reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
406 reg-names = "bsc", "au 406 reg-names = "bsc", "auto-i2c";
407 clock-frequency = <975 407 clock-frequency = <97500>;
408 status = "disabled"; 408 status = "disabled";
409 }; 409 };
410 }; 410 };
411 411
412 /* 412 /*
413 * emmc2 has different DMA constraints 413 * emmc2 has different DMA constraints based on SoC revisions. It was
414 * moved into its own bus, so as for R 414 * moved into its own bus, so as for RPi4's firmware to update them.
415 * The firmware will find whether the 415 * The firmware will find whether the emmc2bus alias is defined, and if
416 * so, it'll edit the dma-ranges prope 416 * so, it'll edit the dma-ranges property below accordingly.
417 */ 417 */
418 emmc2bus: emmc2bus { 418 emmc2bus: emmc2bus {
419 compatible = "simple-bus"; 419 compatible = "simple-bus";
420 #address-cells = <2>; 420 #address-cells = <2>;
421 #size-cells = <1>; 421 #size-cells = <1>;
422 422
423 ranges = <0x0 0x7e000000 0x0 423 ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
424 dma-ranges = <0x0 0xc0000000 424 dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
425 425
426 emmc2: mmc@7e340000 { 426 emmc2: mmc@7e340000 {
427 compatible = "brcm,bcm 427 compatible = "brcm,bcm2711-emmc2";
428 reg = <0x0 0x7e340000 428 reg = <0x0 0x7e340000 0x100>;
429 interrupts = <GIC_SPI 429 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
430 clocks = <&clocks BCM2 430 clocks = <&clocks BCM2711_CLOCK_EMMC2>;
431 status = "disabled"; 431 status = "disabled";
432 }; 432 };
433 }; 433 };
434 434
435 pmu { !! 435 arm-pmu {
436 compatible = "arm,cortex-a72-p !! 436 compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
437 interrupts = <GIC_SPI 16 IRQ_T 437 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
438 <GIC_SPI 17 IRQ_TYPE_L 438 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
439 <GIC_SPI 18 IRQ_TYPE_L 439 <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
440 <GIC_SPI 19 IRQ_TYPE_L 440 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
441 interrupt-affinity = <&cpu0>, 441 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
442 }; 442 };
443 443
444 timer { 444 timer {
445 compatible = "arm,armv8-timer" 445 compatible = "arm,armv8-timer";
446 interrupts = <GIC_PPI 13 (GIC_ 446 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
447 IRQ_ 447 IRQ_TYPE_LEVEL_LOW)>,
448 <GIC_PPI 14 (GIC_ 448 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
449 IRQ_ 449 IRQ_TYPE_LEVEL_LOW)>,
450 <GIC_PPI 11 (GIC_ 450 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
451 IRQ_ 451 IRQ_TYPE_LEVEL_LOW)>,
452 <GIC_PPI 10 (GIC_ 452 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
453 IRQ_ 453 IRQ_TYPE_LEVEL_LOW)>;
454 /* This only applies to the AR 454 /* This only applies to the ARMv7 stub */
455 arm,cpu-registers-not-fw-confi 455 arm,cpu-registers-not-fw-configured;
456 }; 456 };
457 457
458 cpus: cpus { 458 cpus: cpus {
459 #address-cells = <1>; 459 #address-cells = <1>;
460 #size-cells = <0>; 460 #size-cells = <0>;
461 enable-method = "brcm,bcm2836- 461 enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
462 462
463 /* Source for d/i-cache-line-s 463 /* Source for d/i-cache-line-size and d/i-cache-sets
464 * https://developer.arm.com/d 464 * https://developer.arm.com/documentation/100095/0003
465 * /Level-1-Memory-System/Abou 465 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
466 * Source for d/i-cache-size 466 * Source for d/i-cache-size
467 * https://www.raspberrypi.com 467 * https://www.raspberrypi.com/documentation/computers
468 * /processors.html#bcm2711 468 * /processors.html#bcm2711
469 */ 469 */
470 cpu0: cpu@0 { 470 cpu0: cpu@0 {
471 device_type = "cpu"; 471 device_type = "cpu";
472 compatible = "arm,cort 472 compatible = "arm,cortex-a72";
473 reg = <0>; 473 reg = <0>;
474 enable-method = "spin- 474 enable-method = "spin-table";
475 cpu-release-addr = <0x 475 cpu-release-addr = <0x0 0x000000d8>;
476 d-cache-size = <0x8000 476 d-cache-size = <0x8000>;
477 d-cache-line-size = <6 477 d-cache-line-size = <64>;
478 d-cache-sets = <256>; 478 d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
479 i-cache-size = <0xc000 479 i-cache-size = <0xc000>;
480 i-cache-line-size = <6 480 i-cache-line-size = <64>;
481 i-cache-sets = <256>; 481 i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
482 next-level-cache = <&l 482 next-level-cache = <&l2>;
483 }; 483 };
484 484
485 cpu1: cpu@1 { 485 cpu1: cpu@1 {
486 device_type = "cpu"; 486 device_type = "cpu";
487 compatible = "arm,cort 487 compatible = "arm,cortex-a72";
488 reg = <1>; 488 reg = <1>;
489 enable-method = "spin- 489 enable-method = "spin-table";
490 cpu-release-addr = <0x 490 cpu-release-addr = <0x0 0x000000e0>;
491 d-cache-size = <0x8000 491 d-cache-size = <0x8000>;
492 d-cache-line-size = <6 492 d-cache-line-size = <64>;
493 d-cache-sets = <256>; 493 d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
494 i-cache-size = <0xc000 494 i-cache-size = <0xc000>;
495 i-cache-line-size = <6 495 i-cache-line-size = <64>;
496 i-cache-sets = <256>; 496 i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
497 next-level-cache = <&l 497 next-level-cache = <&l2>;
498 }; 498 };
499 499
500 cpu2: cpu@2 { 500 cpu2: cpu@2 {
501 device_type = "cpu"; 501 device_type = "cpu";
502 compatible = "arm,cort 502 compatible = "arm,cortex-a72";
503 reg = <2>; 503 reg = <2>;
504 enable-method = "spin- 504 enable-method = "spin-table";
505 cpu-release-addr = <0x 505 cpu-release-addr = <0x0 0x000000e8>;
506 d-cache-size = <0x8000 506 d-cache-size = <0x8000>;
507 d-cache-line-size = <6 507 d-cache-line-size = <64>;
508 d-cache-sets = <256>; 508 d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
509 i-cache-size = <0xc000 509 i-cache-size = <0xc000>;
510 i-cache-line-size = <6 510 i-cache-line-size = <64>;
511 i-cache-sets = <256>; 511 i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
512 next-level-cache = <&l 512 next-level-cache = <&l2>;
513 }; 513 };
514 514
515 cpu3: cpu@3 { 515 cpu3: cpu@3 {
516 device_type = "cpu"; 516 device_type = "cpu";
517 compatible = "arm,cort 517 compatible = "arm,cortex-a72";
518 reg = <3>; 518 reg = <3>;
519 enable-method = "spin- 519 enable-method = "spin-table";
520 cpu-release-addr = <0x 520 cpu-release-addr = <0x0 0x000000f0>;
521 d-cache-size = <0x8000 521 d-cache-size = <0x8000>;
522 d-cache-line-size = <6 522 d-cache-line-size = <64>;
523 d-cache-sets = <256>; 523 d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
524 i-cache-size = <0xc000 524 i-cache-size = <0xc000>;
525 i-cache-line-size = <6 525 i-cache-line-size = <64>;
526 i-cache-sets = <256>; 526 i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
527 next-level-cache = <&l 527 next-level-cache = <&l2>;
528 }; 528 };
529 529
530 /* Source for d/i-cache-line-s 530 /* Source for d/i-cache-line-size and d/i-cache-sets
531 * https://developer.arm.com/ 531 * https://developer.arm.com/documentation/100095/0003
532 * /Level-2-Memory-System/Abo 532 * /Level-2-Memory-System/About-the-L2-memory-system?lang=en
533 * Source for d/i-cache-size 533 * Source for d/i-cache-size
534 * https://www.raspberrypi.co 534 * https://www.raspberrypi.com/documentation/computers
535 * /processors.html#bcm2711 535 * /processors.html#bcm2711
536 */ 536 */
537 l2: l2-cache0 { 537 l2: l2-cache0 {
538 compatible = "cache"; 538 compatible = "cache";
539 cache-unified; 539 cache-unified;
540 cache-size = <0x100000 540 cache-size = <0x100000>;
541 cache-line-size = <64> 541 cache-line-size = <64>;
542 cache-sets = <1024>; / 542 cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
543 cache-level = <2>; 543 cache-level = <2>;
544 }; 544 };
545 }; 545 };
546 546
547 scb { 547 scb {
548 compatible = "simple-bus"; 548 compatible = "simple-bus";
549 #address-cells = <2>; 549 #address-cells = <2>;
550 #size-cells = <1>; 550 #size-cells = <1>;
551 551
552 ranges = <0x0 0x7c000000 0x0 552 ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
553 <0x6 0x00000000 0x6 553 <0x6 0x00000000 0x6 0x00000000 0x40000000>;
554 554
555 pcie0: pcie@7d500000 { 555 pcie0: pcie@7d500000 {
556 compatible = "brcm,bcm 556 compatible = "brcm,bcm2711-pcie";
557 reg = <0x0 0x7d500000 557 reg = <0x0 0x7d500000 0x9310>;
558 device_type = "pci"; 558 device_type = "pci";
559 #address-cells = <3>; 559 #address-cells = <3>;
560 #interrupt-cells = <1> 560 #interrupt-cells = <1>;
561 #size-cells = <2>; 561 #size-cells = <2>;
562 interrupts = <GIC_SPI 562 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
563 <GIC_SPI 563 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
564 interrupt-names = "pci 564 interrupt-names = "pcie", "msi";
565 interrupt-map-mask = < 565 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
566 interrupt-map = <0 0 0 566 interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
567 567 IRQ_TYPE_LEVEL_HIGH>,
568 <0 0 0 568 <0 0 0 2 &gicv2 GIC_SPI 144
569 569 IRQ_TYPE_LEVEL_HIGH>,
570 <0 0 0 570 <0 0 0 3 &gicv2 GIC_SPI 145
571 571 IRQ_TYPE_LEVEL_HIGH>,
572 <0 0 0 572 <0 0 0 4 &gicv2 GIC_SPI 146
573 573 IRQ_TYPE_LEVEL_HIGH>;
574 msi-controller; 574 msi-controller;
575 msi-parent = <&pcie0>; 575 msi-parent = <&pcie0>;
576 576
577 ranges = <0x02000000 0 577 ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
578 0x0 0x040000 578 0x0 0x04000000>;
579 /* 579 /*
580 * The wrapper around 580 * The wrapper around the PCIe block has a bug
581 * preventing it from 581 * preventing it from accessing beyond the first 3GB of
582 * memory. 582 * memory.
583 */ 583 */
584 dma-ranges = <0x020000 584 dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
585 0x0 0xc0 585 0x0 0xc0000000>;
586 brcm,enable-ssc; 586 brcm,enable-ssc;
587 }; 587 };
588 588
589 genet: ethernet@7d580000 { 589 genet: ethernet@7d580000 {
590 compatible = "brcm,bcm 590 compatible = "brcm,bcm2711-genet-v5";
591 reg = <0x0 0x7d580000 591 reg = <0x0 0x7d580000 0x10000>;
592 #address-cells = <0x1> 592 #address-cells = <0x1>;
593 #size-cells = <0x1>; 593 #size-cells = <0x1>;
594 interrupts = <GIC_SPI 594 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
595 <GIC_SPI 595 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
596 status = "disabled"; 596 status = "disabled";
597 597
598 genet_mdio: mdio@e14 { 598 genet_mdio: mdio@e14 {
599 compatible = " 599 compatible = "brcm,genet-mdio-v5";
600 reg = <0xe14 0 600 reg = <0xe14 0x8>;
601 reg-names = "m 601 reg-names = "mdio";
602 #address-cells 602 #address-cells = <0x1>;
603 #size-cells = 603 #size-cells = <0x0>;
604 }; 604 };
605 }; 605 };
606 606
607 xhci: usb@7e9c0000 { 607 xhci: usb@7e9c0000 {
608 compatible = "brcm,bcm 608 compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
609 reg = <0x0 0x7e9c0000 609 reg = <0x0 0x7e9c0000 0x100000>;
610 #address-cells = <1>; 610 #address-cells = <1>;
611 #size-cells = <0>; 611 #size-cells = <0>;
612 interrupts = <GIC_SPI 612 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
613 /* DWC2 and this IP bl 613 /* DWC2 and this IP block share the same USB PHY,
614 * enabling both at th 614 * enabling both at the same time results in lockups.
615 * So keep this node d 615 * So keep this node disabled and let the bootloader
616 * decide which interf 616 * decide which interface should be enabled.
617 */ 617 */
618 status = "disabled"; 618 status = "disabled";
619 }; 619 };
620 620
621 v3d: gpu@7ec00000 { 621 v3d: gpu@7ec00000 {
622 compatible = "brcm,271 622 compatible = "brcm,2711-v3d";
623 reg = <0x0 0x7ec00000 623 reg = <0x0 0x7ec00000 0x4000>,
624 <0x0 0x7ec04000 624 <0x0 0x7ec04000 0x4000>;
625 reg-names = "hub", "co 625 reg-names = "hub", "core0";
626 626
627 power-domains = <&pm B 627 power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
628 resets = <&pm BCM2835_ 628 resets = <&pm BCM2835_RESET_V3D>;
629 interrupts = <GIC_SPI 629 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
630 }; 630 };
631 }; 631 };
632 }; 632 };
633 633
634 &clk_osc { 634 &clk_osc {
635 clock-frequency = <54000000>; 635 clock-frequency = <54000000>;
636 }; 636 };
637 637
638 &clocks { 638 &clocks {
639 compatible = "brcm,bcm2711-cprman"; 639 compatible = "brcm,bcm2711-cprman";
640 }; 640 };
641 641
642 &cpu_thermal { 642 &cpu_thermal {
643 coefficients = <(-487) 410040>; 643 coefficients = <(-487) 410040>;
644 thermal-sensors = <&thermal>; 644 thermal-sensors = <&thermal>;
645 }; 645 };
646 646
647 &dsi0 { 647 &dsi0 {
648 interrupts = <GIC_SPI 100 IRQ_TYPE_LEV 648 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
649 }; 649 };
650 650
651 &dsi1 { 651 &dsi1 {
652 interrupts = <GIC_SPI 108 IRQ_TYPE_LEV 652 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
653 compatible = "brcm,bcm2711-dsi1"; 653 compatible = "brcm,bcm2711-dsi1";
654 }; 654 };
655 655
656 &gpio { 656 &gpio {
657 compatible = "brcm,bcm2711-gpio"; 657 compatible = "brcm,bcm2711-gpio";
658 interrupts = <GIC_SPI 113 IRQ_TYPE_LEV 658 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
659 <GIC_SPI 114 IRQ_TYPE_LEV 659 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
660 <GIC_SPI 115 IRQ_TYPE_LEV 660 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
661 <GIC_SPI 116 IRQ_TYPE_LEV 661 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
662 662
663 gpio-ranges = <&gpio 0 0 58>; 663 gpio-ranges = <&gpio 0 0 58>;
664 664
665 gpclk0_gpio49: gpclk0-gpio49 { 665 gpclk0_gpio49: gpclk0-gpio49 {
666 pin-gpclk { 666 pin-gpclk {
667 pins = "gpio49"; 667 pins = "gpio49";
668 function = "alt1"; 668 function = "alt1";
669 bias-disable; 669 bias-disable;
670 }; 670 };
671 }; 671 };
672 gpclk1_gpio50: gpclk1-gpio50 { 672 gpclk1_gpio50: gpclk1-gpio50 {
673 pin-gpclk { 673 pin-gpclk {
674 pins = "gpio50"; 674 pins = "gpio50";
675 function = "alt1"; 675 function = "alt1";
676 bias-disable; 676 bias-disable;
677 }; 677 };
678 }; 678 };
679 gpclk2_gpio51: gpclk2-gpio51 { 679 gpclk2_gpio51: gpclk2-gpio51 {
680 pin-gpclk { 680 pin-gpclk {
681 pins = "gpio51"; 681 pins = "gpio51";
682 function = "alt1"; 682 function = "alt1";
683 bias-disable; 683 bias-disable;
684 }; 684 };
685 }; 685 };
686 686
687 i2c0_gpio46: i2c0-gpio46 { 687 i2c0_gpio46: i2c0-gpio46 {
688 pin-sda { 688 pin-sda {
689 function = "alt0"; 689 function = "alt0";
690 pins = "gpio46"; 690 pins = "gpio46";
691 bias-pull-up; 691 bias-pull-up;
692 }; 692 };
693 pin-scl { 693 pin-scl {
694 function = "alt0"; 694 function = "alt0";
695 pins = "gpio47"; 695 pins = "gpio47";
696 bias-disable; 696 bias-disable;
697 }; 697 };
698 }; 698 };
699 i2c1_gpio46: i2c1-gpio46 { 699 i2c1_gpio46: i2c1-gpio46 {
700 pin-sda { 700 pin-sda {
701 function = "alt1"; 701 function = "alt1";
702 pins = "gpio46"; 702 pins = "gpio46";
703 bias-pull-up; 703 bias-pull-up;
704 }; 704 };
705 pin-scl { 705 pin-scl {
706 function = "alt1"; 706 function = "alt1";
707 pins = "gpio47"; 707 pins = "gpio47";
708 bias-disable; 708 bias-disable;
709 }; 709 };
710 }; 710 };
711 i2c3_gpio2: i2c3-gpio2 { 711 i2c3_gpio2: i2c3-gpio2 {
712 pin-sda { 712 pin-sda {
713 function = "alt5"; 713 function = "alt5";
714 pins = "gpio2"; 714 pins = "gpio2";
715 bias-pull-up; 715 bias-pull-up;
716 }; 716 };
717 pin-scl { 717 pin-scl {
718 function = "alt5"; 718 function = "alt5";
719 pins = "gpio3"; 719 pins = "gpio3";
720 bias-disable; 720 bias-disable;
721 }; 721 };
722 }; 722 };
723 i2c3_gpio4: i2c3-gpio4 { 723 i2c3_gpio4: i2c3-gpio4 {
724 pin-sda { 724 pin-sda {
725 function = "alt5"; 725 function = "alt5";
726 pins = "gpio4"; 726 pins = "gpio4";
727 bias-pull-up; 727 bias-pull-up;
728 }; 728 };
729 pin-scl { 729 pin-scl {
730 function = "alt5"; 730 function = "alt5";
731 pins = "gpio5"; 731 pins = "gpio5";
732 bias-disable; 732 bias-disable;
733 }; 733 };
734 }; 734 };
735 i2c4_gpio6: i2c4-gpio6 { 735 i2c4_gpio6: i2c4-gpio6 {
736 pin-sda { 736 pin-sda {
737 function = "alt5"; 737 function = "alt5";
738 pins = "gpio6"; 738 pins = "gpio6";
739 bias-pull-up; 739 bias-pull-up;
740 }; 740 };
741 pin-scl { 741 pin-scl {
742 function = "alt5"; 742 function = "alt5";
743 pins = "gpio7"; 743 pins = "gpio7";
744 bias-disable; 744 bias-disable;
745 }; 745 };
746 }; 746 };
747 i2c4_gpio8: i2c4-gpio8 { 747 i2c4_gpio8: i2c4-gpio8 {
748 pin-sda { 748 pin-sda {
749 function = "alt5"; 749 function = "alt5";
750 pins = "gpio8"; 750 pins = "gpio8";
751 bias-pull-up; 751 bias-pull-up;
752 }; 752 };
753 pin-scl { 753 pin-scl {
754 function = "alt5"; 754 function = "alt5";
755 pins = "gpio9"; 755 pins = "gpio9";
756 bias-disable; 756 bias-disable;
757 }; 757 };
758 }; 758 };
759 i2c5_gpio10: i2c5-gpio10 { 759 i2c5_gpio10: i2c5-gpio10 {
760 pin-sda { 760 pin-sda {
761 function = "alt5"; 761 function = "alt5";
762 pins = "gpio10"; 762 pins = "gpio10";
763 bias-pull-up; 763 bias-pull-up;
764 }; 764 };
765 pin-scl { 765 pin-scl {
766 function = "alt5"; 766 function = "alt5";
767 pins = "gpio11"; 767 pins = "gpio11";
768 bias-disable; 768 bias-disable;
769 }; 769 };
770 }; 770 };
771 i2c5_gpio12: i2c5-gpio12 { 771 i2c5_gpio12: i2c5-gpio12 {
772 pin-sda { 772 pin-sda {
773 function = "alt5"; 773 function = "alt5";
774 pins = "gpio12"; 774 pins = "gpio12";
775 bias-pull-up; 775 bias-pull-up;
776 }; 776 };
777 pin-scl { 777 pin-scl {
778 function = "alt5"; 778 function = "alt5";
779 pins = "gpio13"; 779 pins = "gpio13";
780 bias-disable; 780 bias-disable;
781 }; 781 };
782 }; 782 };
783 i2c6_gpio0: i2c6-gpio0 { 783 i2c6_gpio0: i2c6-gpio0 {
784 pin-sda { 784 pin-sda {
785 function = "alt5"; 785 function = "alt5";
786 pins = "gpio0"; 786 pins = "gpio0";
787 bias-pull-up; 787 bias-pull-up;
788 }; 788 };
789 pin-scl { 789 pin-scl {
790 function = "alt5"; 790 function = "alt5";
791 pins = "gpio1"; 791 pins = "gpio1";
792 bias-disable; 792 bias-disable;
793 }; 793 };
794 }; 794 };
795 i2c6_gpio22: i2c6-gpio22 { 795 i2c6_gpio22: i2c6-gpio22 {
796 pin-sda { 796 pin-sda {
797 function = "alt5"; 797 function = "alt5";
798 pins = "gpio22"; 798 pins = "gpio22";
799 bias-pull-up; 799 bias-pull-up;
800 }; 800 };
801 pin-scl { 801 pin-scl {
802 function = "alt5"; 802 function = "alt5";
803 pins = "gpio23"; 803 pins = "gpio23";
804 bias-disable; 804 bias-disable;
805 }; 805 };
806 }; 806 };
807 i2c_slave_gpio8: i2c-slave-gpio8 { 807 i2c_slave_gpio8: i2c-slave-gpio8 {
808 pins-i2c-slave { 808 pins-i2c-slave {
809 pins = "gpio8", 809 pins = "gpio8",
810 "gpio9", 810 "gpio9",
811 "gpio10", 811 "gpio10",
812 "gpio11"; 812 "gpio11";
813 function = "alt3"; 813 function = "alt3";
814 }; 814 };
815 }; 815 };
816 816
817 jtag_gpio48: jtag-gpio48 { 817 jtag_gpio48: jtag-gpio48 {
818 pins-jtag { 818 pins-jtag {
819 pins = "gpio48", 819 pins = "gpio48",
820 "gpio49", 820 "gpio49",
821 "gpio50", 821 "gpio50",
822 "gpio51", 822 "gpio51",
823 "gpio52", 823 "gpio52",
824 "gpio53"; 824 "gpio53";
825 function = "alt4"; 825 function = "alt4";
826 }; 826 };
827 }; 827 };
828 828
829 mii_gpio28: mii-gpio28 { 829 mii_gpio28: mii-gpio28 {
830 pins-mii { 830 pins-mii {
831 pins = "gpio28", 831 pins = "gpio28",
832 "gpio29", 832 "gpio29",
833 "gpio30", 833 "gpio30",
834 "gpio31"; 834 "gpio31";
835 function = "alt4"; 835 function = "alt4";
836 }; 836 };
837 }; 837 };
838 mii_gpio36: mii-gpio36 { 838 mii_gpio36: mii-gpio36 {
839 pins-mii { 839 pins-mii {
840 pins = "gpio36", 840 pins = "gpio36",
841 "gpio37", 841 "gpio37",
842 "gpio38", 842 "gpio38",
843 "gpio39"; 843 "gpio39";
844 function = "alt5"; 844 function = "alt5";
845 }; 845 };
846 }; 846 };
847 847
848 pcm_gpio50: pcm-gpio50 { 848 pcm_gpio50: pcm-gpio50 {
849 pins-pcm { 849 pins-pcm {
850 pins = "gpio50", 850 pins = "gpio50",
851 "gpio51", 851 "gpio51",
852 "gpio52", 852 "gpio52",
853 "gpio53"; 853 "gpio53";
854 function = "alt2"; 854 function = "alt2";
855 }; 855 };
856 }; 856 };
857 857
858 pwm0_0_gpio12: pwm0-0-gpio12 { 858 pwm0_0_gpio12: pwm0-0-gpio12 {
859 pin-pwm { 859 pin-pwm {
860 pins = "gpio12"; 860 pins = "gpio12";
861 function = "alt0"; 861 function = "alt0";
862 bias-disable; 862 bias-disable;
863 }; 863 };
864 }; 864 };
865 pwm0_0_gpio18: pwm0-0-gpio18 { 865 pwm0_0_gpio18: pwm0-0-gpio18 {
866 pin-pwm { 866 pin-pwm {
867 pins = "gpio18"; 867 pins = "gpio18";
868 function = "alt5"; 868 function = "alt5";
869 bias-disable; 869 bias-disable;
870 }; 870 };
871 }; 871 };
872 pwm1_0_gpio40: pwm1-0-gpio40 { 872 pwm1_0_gpio40: pwm1-0-gpio40 {
873 pin-pwm { 873 pin-pwm {
874 pins = "gpio40"; 874 pins = "gpio40";
875 function = "alt0"; 875 function = "alt0";
876 bias-disable; 876 bias-disable;
877 }; 877 };
878 }; 878 };
879 pwm0_1_gpio13: pwm0-1-gpio13 { 879 pwm0_1_gpio13: pwm0-1-gpio13 {
880 pin-pwm { 880 pin-pwm {
881 pins = "gpio13"; 881 pins = "gpio13";
882 function = "alt0"; 882 function = "alt0";
883 bias-disable; 883 bias-disable;
884 }; 884 };
885 }; 885 };
886 pwm0_1_gpio19: pwm0-1-gpio19 { 886 pwm0_1_gpio19: pwm0-1-gpio19 {
887 pin-pwm { 887 pin-pwm {
888 pins = "gpio19"; 888 pins = "gpio19";
889 function = "alt5"; 889 function = "alt5";
890 bias-disable; 890 bias-disable;
891 }; 891 };
892 }; 892 };
893 pwm1_1_gpio41: pwm1-1-gpio41 { 893 pwm1_1_gpio41: pwm1-1-gpio41 {
894 pin-pwm { 894 pin-pwm {
895 pins = "gpio41"; 895 pins = "gpio41";
896 function = "alt0"; 896 function = "alt0";
897 bias-disable; 897 bias-disable;
898 }; 898 };
899 }; 899 };
900 pwm0_1_gpio45: pwm0-1-gpio45 { 900 pwm0_1_gpio45: pwm0-1-gpio45 {
901 pin-pwm { 901 pin-pwm {
902 pins = "gpio45"; 902 pins = "gpio45";
903 function = "alt0"; 903 function = "alt0";
904 bias-disable; 904 bias-disable;
905 }; 905 };
906 }; 906 };
907 pwm0_0_gpio52: pwm0-0-gpio52 { 907 pwm0_0_gpio52: pwm0-0-gpio52 {
908 pin-pwm { 908 pin-pwm {
909 pins = "gpio52"; 909 pins = "gpio52";
910 function = "alt1"; 910 function = "alt1";
911 bias-disable; 911 bias-disable;
912 }; 912 };
913 }; 913 };
914 pwm0_1_gpio53: pwm0-1-gpio53 { 914 pwm0_1_gpio53: pwm0-1-gpio53 {
915 pin-pwm { 915 pin-pwm {
916 pins = "gpio53"; 916 pins = "gpio53";
917 function = "alt1"; 917 function = "alt1";
918 bias-disable; 918 bias-disable;
919 }; 919 };
920 }; 920 };
921 921
922 rgmii_gpio35: rgmii-gpio35 { 922 rgmii_gpio35: rgmii-gpio35 {
923 pin-start-stop { 923 pin-start-stop {
924 pins = "gpio35"; 924 pins = "gpio35";
925 function = "alt4"; 925 function = "alt4";
926 }; 926 };
927 pin-rx-ok { 927 pin-rx-ok {
928 pins = "gpio36"; 928 pins = "gpio36";
929 function = "alt4"; 929 function = "alt4";
930 }; 930 };
931 }; 931 };
932 rgmii_irq_gpio34: rgmii-irq-gpio34 { 932 rgmii_irq_gpio34: rgmii-irq-gpio34 {
933 pin-irq { 933 pin-irq {
934 pins = "gpio34"; 934 pins = "gpio34";
935 function = "alt5"; 935 function = "alt5";
936 }; 936 };
937 }; 937 };
938 rgmii_irq_gpio39: rgmii-irq-gpio39 { 938 rgmii_irq_gpio39: rgmii-irq-gpio39 {
939 pin-irq { 939 pin-irq {
940 pins = "gpio39"; 940 pins = "gpio39";
941 function = "alt4"; 941 function = "alt4";
942 }; 942 };
943 }; 943 };
944 rgmii_mdio_gpio28: rgmii-mdio-gpio28 { 944 rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
945 pins-mdio { 945 pins-mdio {
946 pins = "gpio28", 946 pins = "gpio28",
947 "gpio29"; 947 "gpio29";
948 function = "alt5"; 948 function = "alt5";
949 }; 949 };
950 }; 950 };
951 rgmii_mdio_gpio37: rgmii-mdio-gpio37 { 951 rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
952 pins-mdio { 952 pins-mdio {
953 pins = "gpio37", 953 pins = "gpio37",
954 "gpio38"; 954 "gpio38";
955 function = "alt4"; 955 function = "alt4";
956 }; 956 };
957 }; 957 };
958 958
959 spi0_gpio46: spi0-gpio46 { 959 spi0_gpio46: spi0-gpio46 {
960 pins-spi { 960 pins-spi {
961 pins = "gpio46", 961 pins = "gpio46",
962 "gpio47", 962 "gpio47",
963 "gpio48", 963 "gpio48",
964 "gpio49"; 964 "gpio49";
965 function = "alt2"; 965 function = "alt2";
966 }; 966 };
967 }; 967 };
968 spi2_gpio46: spi2-gpio46 { 968 spi2_gpio46: spi2-gpio46 {
969 pins-spi { 969 pins-spi {
970 pins = "gpio46", 970 pins = "gpio46",
971 "gpio47", 971 "gpio47",
972 "gpio48", 972 "gpio48",
973 "gpio49", 973 "gpio49",
974 "gpio50"; 974 "gpio50";
975 function = "alt5"; 975 function = "alt5";
976 }; 976 };
977 }; 977 };
978 spi3_gpio0: spi3-gpio0 { 978 spi3_gpio0: spi3-gpio0 {
979 pins-spi { 979 pins-spi {
980 pins = "gpio0", 980 pins = "gpio0",
981 "gpio1", 981 "gpio1",
982 "gpio2", 982 "gpio2",
983 "gpio3"; 983 "gpio3";
984 function = "alt3"; 984 function = "alt3";
985 }; 985 };
986 }; 986 };
987 spi4_gpio4: spi4-gpio4 { 987 spi4_gpio4: spi4-gpio4 {
988 pins-spi { 988 pins-spi {
989 pins = "gpio4", 989 pins = "gpio4",
990 "gpio5", 990 "gpio5",
991 "gpio6", 991 "gpio6",
992 "gpio7"; 992 "gpio7";
993 function = "alt3"; 993 function = "alt3";
994 }; 994 };
995 }; 995 };
996 spi5_gpio12: spi5-gpio12 { 996 spi5_gpio12: spi5-gpio12 {
997 pins-spi { 997 pins-spi {
998 pins = "gpio12", 998 pins = "gpio12",
999 "gpio13", 999 "gpio13",
1000 "gpio14", 1000 "gpio14",
1001 "gpio15"; 1001 "gpio15";
1002 function = "alt3"; 1002 function = "alt3";
1003 }; 1003 };
1004 }; 1004 };
1005 spi6_gpio18: spi6-gpio18 { 1005 spi6_gpio18: spi6-gpio18 {
1006 pins-spi { 1006 pins-spi {
1007 pins = "gpio18", 1007 pins = "gpio18",
1008 "gpio19", 1008 "gpio19",
1009 "gpio20", 1009 "gpio20",
1010 "gpio21"; 1010 "gpio21";
1011 function = "alt3"; 1011 function = "alt3";
1012 }; 1012 };
1013 }; 1013 };
1014 1014
1015 uart2_gpio0: uart2-gpio0 { 1015 uart2_gpio0: uart2-gpio0 {
1016 pin-tx { 1016 pin-tx {
1017 pins = "gpio0"; 1017 pins = "gpio0";
1018 function = "alt4"; 1018 function = "alt4";
1019 bias-disable; 1019 bias-disable;
1020 }; 1020 };
1021 pin-rx { 1021 pin-rx {
1022 pins = "gpio1"; 1022 pins = "gpio1";
1023 function = "alt4"; 1023 function = "alt4";
1024 bias-pull-up; 1024 bias-pull-up;
1025 }; 1025 };
1026 }; 1026 };
1027 uart2_ctsrts_gpio2: uart2-ctsrts-gpio 1027 uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
1028 pin-cts { 1028 pin-cts {
1029 pins = "gpio2"; 1029 pins = "gpio2";
1030 function = "alt4"; 1030 function = "alt4";
1031 bias-pull-up; 1031 bias-pull-up;
1032 }; 1032 };
1033 pin-rts { 1033 pin-rts {
1034 pins = "gpio3"; 1034 pins = "gpio3";
1035 function = "alt4"; 1035 function = "alt4";
1036 bias-disable; 1036 bias-disable;
1037 }; 1037 };
1038 }; 1038 };
1039 uart3_gpio4: uart3-gpio4 { 1039 uart3_gpio4: uart3-gpio4 {
1040 pin-tx { 1040 pin-tx {
1041 pins = "gpio4"; 1041 pins = "gpio4";
1042 function = "alt4"; 1042 function = "alt4";
1043 bias-disable; 1043 bias-disable;
1044 }; 1044 };
1045 pin-rx { 1045 pin-rx {
1046 pins = "gpio5"; 1046 pins = "gpio5";
1047 function = "alt4"; 1047 function = "alt4";
1048 bias-pull-up; 1048 bias-pull-up;
1049 }; 1049 };
1050 }; 1050 };
1051 uart3_ctsrts_gpio6: uart3-ctsrts-gpio 1051 uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
1052 pin-cts { 1052 pin-cts {
1053 pins = "gpio6"; 1053 pins = "gpio6";
1054 function = "alt4"; 1054 function = "alt4";
1055 bias-pull-up; 1055 bias-pull-up;
1056 }; 1056 };
1057 pin-rts { 1057 pin-rts {
1058 pins = "gpio7"; 1058 pins = "gpio7";
1059 function = "alt4"; 1059 function = "alt4";
1060 bias-disable; 1060 bias-disable;
1061 }; 1061 };
1062 }; 1062 };
1063 uart4_gpio8: uart4-gpio8 { 1063 uart4_gpio8: uart4-gpio8 {
1064 pin-tx { 1064 pin-tx {
1065 pins = "gpio8"; 1065 pins = "gpio8";
1066 function = "alt4"; 1066 function = "alt4";
1067 bias-disable; 1067 bias-disable;
1068 }; 1068 };
1069 pin-rx { 1069 pin-rx {
1070 pins = "gpio9"; 1070 pins = "gpio9";
1071 function = "alt4"; 1071 function = "alt4";
1072 bias-pull-up; 1072 bias-pull-up;
1073 }; 1073 };
1074 }; 1074 };
1075 uart4_ctsrts_gpio10: uart4-ctsrts-gpi 1075 uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
1076 pin-cts { 1076 pin-cts {
1077 pins = "gpio10"; 1077 pins = "gpio10";
1078 function = "alt4"; 1078 function = "alt4";
1079 bias-pull-up; 1079 bias-pull-up;
1080 }; 1080 };
1081 pin-rts { 1081 pin-rts {
1082 pins = "gpio11"; 1082 pins = "gpio11";
1083 function = "alt4"; 1083 function = "alt4";
1084 bias-disable; 1084 bias-disable;
1085 }; 1085 };
1086 }; 1086 };
1087 uart5_gpio12: uart5-gpio12 { 1087 uart5_gpio12: uart5-gpio12 {
1088 pin-tx { 1088 pin-tx {
1089 pins = "gpio12"; 1089 pins = "gpio12";
1090 function = "alt4"; 1090 function = "alt4";
1091 bias-disable; 1091 bias-disable;
1092 }; 1092 };
1093 pin-rx { 1093 pin-rx {
1094 pins = "gpio13"; 1094 pins = "gpio13";
1095 function = "alt4"; 1095 function = "alt4";
1096 bias-pull-up; 1096 bias-pull-up;
1097 }; 1097 };
1098 }; 1098 };
1099 uart5_ctsrts_gpio14: uart5-ctsrts-gpi 1099 uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
1100 pin-cts { 1100 pin-cts {
1101 pins = "gpio14"; 1101 pins = "gpio14";
1102 function = "alt4"; 1102 function = "alt4";
1103 bias-pull-up; 1103 bias-pull-up;
1104 }; 1104 };
1105 pin-rts { 1105 pin-rts {
1106 pins = "gpio15"; 1106 pins = "gpio15";
1107 function = "alt4"; 1107 function = "alt4";
1108 bias-disable; 1108 bias-disable;
1109 }; 1109 };
1110 }; 1110 };
1111 }; 1111 };
1112 1112
1113 &rmem { 1113 &rmem {
1114 #address-cells = <2>; 1114 #address-cells = <2>;
1115 }; <<
1116 <<
1117 &csi0 { <<
1118 interrupts = <GIC_SPI 102 IRQ_TYPE_LE <<
1119 }; <<
1120 <<
1121 &csi1 { <<
1122 interrupts = <GIC_SPI 103 IRQ_TYPE_LE <<
1123 }; 1115 };
1124 1116
1125 &cma { 1117 &cma {
1126 /* 1118 /*
1127 * arm64 reserves the CMA by default 1119 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
1128 * that's not good enough for the BCM 1120 * that's not good enough for the BCM2711 as some devices can
1129 * only address the lower 1G of memor 1121 * only address the lower 1G of memory (ZONE_DMA).
1130 */ 1122 */
1131 alloc-ranges = <0x0 0x00000000 0x4000 1123 alloc-ranges = <0x0 0x00000000 0x40000000>;
1132 }; 1124 };
1133 1125
1134 &i2c0 { 1126 &i2c0 {
1135 compatible = "brcm,bcm2711-i2c", "brc 1127 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
1136 interrupts = <GIC_SPI 117 IRQ_TYPE_LE 1128 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
1137 }; 1129 };
1138 1130
1139 &i2c1 { 1131 &i2c1 {
1140 compatible = "brcm,bcm2711-i2c", "brc 1132 compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
1141 interrupts = <GIC_SPI 117 IRQ_TYPE_LE 1133 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
1142 }; 1134 };
1143 1135
1144 &mailbox { 1136 &mailbox {
1145 interrupts = <GIC_SPI 33 IRQ_TYPE_LEV 1137 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1146 }; 1138 };
1147 1139
1148 &sdhci { 1140 &sdhci {
1149 interrupts = <GIC_SPI 126 IRQ_TYPE_LE 1141 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
1150 }; 1142 };
1151 1143
1152 &sdhost { 1144 &sdhost {
1153 interrupts = <GIC_SPI 120 IRQ_TYPE_LE 1145 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1154 }; 1146 };
1155 1147
1156 &spi { 1148 &spi {
1157 interrupts = <GIC_SPI 118 IRQ_TYPE_LE 1149 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
1158 }; 1150 };
1159 1151
1160 &spi1 { 1152 &spi1 {
1161 interrupts = <GIC_SPI 93 IRQ_TYPE_LEV 1153 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
1162 }; 1154 };
1163 1155
1164 &spi2 { 1156 &spi2 {
1165 interrupts = <GIC_SPI 93 IRQ_TYPE_LEV 1157 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
1166 }; 1158 };
1167 1159
1168 &system_timer { 1160 &system_timer {
1169 interrupts = <GIC_SPI 64 IRQ_TYPE_LEV 1161 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
1170 <GIC_SPI 65 IRQ_TYPE_LEV 1162 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1171 <GIC_SPI 66 IRQ_TYPE_LEV 1163 <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
1172 <GIC_SPI 67 IRQ_TYPE_LEV 1164 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
1173 }; 1165 };
1174 1166
1175 &txp { 1167 &txp {
1176 interrupts = <GIC_SPI 75 IRQ_TYPE_LEV 1168 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1177 }; 1169 };
1178 1170
1179 &uart0 { 1171 &uart0 {
1180 interrupts = <GIC_SPI 121 IRQ_TYPE_LE 1172 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1181 }; 1173 };
1182 1174
1183 &uart1 { 1175 &uart1 {
1184 interrupts = <GIC_SPI 93 IRQ_TYPE_LEV 1176 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
1185 }; 1177 };
1186 1178
1187 &usb { 1179 &usb {
1188 interrupts = <GIC_SPI 73 IRQ_TYPE_LEV 1180 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
1189 }; 1181 };
1190 1182
1191 &vec { 1183 &vec {
1192 compatible = "brcm,bcm2711-vec"; 1184 compatible = "brcm,bcm2711-vec";
1193 interrupts = <GIC_SPI 123 IRQ_TYPE_LE 1185 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1194 }; 1186 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.