1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree file for D-Link DNS-313 1-Bay N
4 */
5
6 /dts-v1/;
7
8 #include "gemini.dtsi"
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/thermal/thermal.h>
11
12 / {
13 model = "D-Link DNS-313 1-Bay Network
14 compatible = "dlink,dns-313", "cortina
15 #address-cells = <1>;
16 #size-cells = <1>;
17
18 memory@0 {
19 /* 64 MB SDRAM in a Nanya NT5D
20 device_type = "memory";
21 reg = <0x00000000 0x4000000>;
22 };
23
24 aliases {
25 mdio-gpio0 = &mdio0;
26 };
27
28 chosen {
29 bootargs = "console=ttyS0,1920
30 stdout-path = "uart0:19200n8";
31 };
32
33 gpio_keys {
34 compatible = "gpio-keys";
35
36 button-reset {
37 debounce-interval = <1
38 wakeup-source;
39 linux,code = <KEY_REST
40 label = "reset";
41 gpios = <&gpio1 31 GPI
42 };
43 };
44
45 leds {
46 compatible = "gpio-leds";
47 led-power {
48 label = "dns313:blue:p
49 gpios = <&gpio0 1 GPIO
50 default-state = "on";
51 linux,default-trigger
52 };
53 led-disk-blue {
54 label = "dns313:blue:d
55 gpios = <&gpio0 2 GPIO
56 default-state = "off";
57 };
58 led-disk-green {
59 label = "dns313:green:
60 gpios = <&gpio0 3 GPIO
61 default-state = "off";
62 linux,default-trigger
63 };
64 led-disk-red {
65 label = "dns313:red:di
66 gpios = <&gpio0 4 GPIO
67 default-state = "off";
68 linux,default-trigger
69 };
70 };
71
72 /*
73 * This is a ADDA AD0405GB-G73 fan @30
74 */
75 fan0: gpio-fan {
76 compatible = "gpio-fan";
77 gpios = <&gpio0 11 GPIO_ACTIVE
78 <&gpio0 12 GPIO_ACTIVE
79 gpio-fan,speed-map = <0 0>, <3
80 #cooling-cells = <2>;
81 };
82
83 /*
84 * This is the type B USB connector on
85 * a GPIO-controlled USB VBUS detect
86 */
87 usb1_phy: phy {
88 compatible = "gpio-usb-b-conne
89 #phy-cells = <0>;
90 vbus-gpios = <&gpio0 18 GPIO_A
91 };
92
93 /* Global Mixed-Mode Technology G751 m
94 i2c {
95 compatible = "i2c-gpio";
96 sda-gpios = <&gpio0 15 (GPIO_A
97 scl-gpios = <&gpio0 16 (GPIO_A
98 #address-cells = <1>;
99 #size-cells = <0>;
100
101 g751: temperature-sensor@48 {
102 compatible = "gmt,g751
103 reg = <0x48>;
104 #thermal-sensor-cells
105 };
106 };
107
108 thermal-zones {
109 chassis-thermal {
110 /* Poll every 20 secon
111 polling-delay = <20000
112 /* Poll every 2nd seco
113 polling-delay-passive
114
115 thermal-sensors = <&g7
116
117 /* Tripping points fro
118 trips {
119 chassis_alert0
120 /* At
121 temper
122 hyster
123 type =
124 };
125 chassis_alert1
126 /* At
127 temper
128 hyster
129 type =
130 };
131 chassis_crit:
132 /* Jus
133 temper
134 hyster
135 type =
136 };
137 };
138
139 cooling-maps {
140 map0 {
141 trip =
142 coolin
143 };
144 map1 {
145 trip =
146 coolin
147 };
148 };
149 };
150 };
151
152 mdio0: mdio {
153 compatible = "virtual,mdio-gpi
154 /* Uses MDC and MDIO */
155 gpios = <&gpio0 22 GPIO_ACTIVE
156 <&gpio0 21 GPIO_ACTIVE
157 #address-cells = <1>;
158 #size-cells = <0>;
159
160 /* This is a Realtek RTL8211B
161 phy0: ethernet-phy@1 {
162 reg = <1>;
163 device_type = "etherne
164 };
165 };
166
167 soc {
168 flash@30000000 {
169 /*
170 * This is a Eon EN29L
171 * three partitions.
172 */
173 compatible = "cortina,
174 status = "okay";
175 reg = <0x30000000 0x00
176 #address-cells = <1>;
177 #size-cells = <1>;
178
179 /*
180 * This "RedBoot" is t
181 */
182 partition@0 {
183 label = "RedBo
184 reg = <0x00000
185 read-only;
186 };
187 partition@40000 {
188 label = "MTD1"
189 reg = <0x00040
190 read-only;
191 };
192 partition@60000 {
193 label = "MTD2"
194 reg = <0x00060
195 read-only;
196 };
197 };
198
199 syscon: syscon@40000000 {
200 pinctrl {
201 /*
202 */
203 gpio0_default_
204 mux {
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220 };
221 };
222 gpio1_default_
223 mux {
224
225
226
227 };
228 };
229 pinctrl-gmii {
230 mux {
231
232
233 };
234 /*
235 * In
236 * ver
237 */
238 conf0
239
240
241 };
242 conf1
243
244
245 };
246 conf2
247
248
249 };
250 conf3
251
252
253 };
254 conf4
255
256
257 };
258 conf5
259
260
261
262
263
264
265
266
267 };
268 conf6
269
270
271
272 };
273 /* Set
274 conf7
275
276
277 };
278 };
279 };
280 };
281
282 sata: sata@46000000 {
283 /* The ROM uses this m
284 cortina,gemini-ata-mux
285 cortina,gemini-enable-
286 status = "okay";
287 };
288
289 gpio0: gpio@4d000000 {
290 pinctrl-names = "defau
291 pinctrl-0 = <&gpio0_de
292 };
293
294 gpio1: gpio@4e000000 {
295 pinctrl-names = "defau
296 pinctrl-0 = <&gpio1_de
297 };
298
299 ethernet@60000000 {
300 status = "okay";
301
302 ethernet-port@0 {
303 phy-mode = "rg
304 phy-handle = <
305 };
306 ethernet-port@1 {
307 /* Not used in
308 };
309 };
310
311 ide@63000000 {
312 status = "okay";
313 };
314
315 usb@69000000 {
316 status = "okay";
317 dr_mode = "peripheral"
318 usb-phy = <&usb1_phy>;
319 pinctrl-names = "defau
320 pinctrl-0 = <&usb_defa
321 };
322 };
323 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.