1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h> 2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h> 3 #include <dt-bindings/gpio/gpio.h>
4 4
5 #define MBUS_ID(target,attributes) (((target) 5 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
6 6
7 / { 7 / {
8 #address-cells = <1>; 8 #address-cells = <1>;
9 #size-cells = <1>; 9 #size-cells = <1>;
10 compatible = "marvell,kirkwood"; 10 compatible = "marvell,kirkwood";
11 interrupt-parent = <&intc>; 11 interrupt-parent = <&intc>;
12 12
13 cpus { 13 cpus {
14 #address-cells = <1>; 14 #address-cells = <1>;
15 #size-cells = <0>; 15 #size-cells = <0>;
16 16
17 cpu@0 { 17 cpu@0 {
18 device_type = "cpu"; 18 device_type = "cpu";
19 compatible = "marvell, 19 compatible = "marvell,feroceon";
20 reg = <0>; 20 reg = <0>;
21 clocks = <&core_clk 1> 21 clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
22 clock-names = "cpu_clk 22 clock-names = "cpu_clk", "ddrclk", "powersave";
23 }; 23 };
24 }; 24 };
25 25
26 aliases { 26 aliases {
27 gpio0 = &gpio0; 27 gpio0 = &gpio0;
28 gpio1 = &gpio1; 28 gpio1 = &gpio1;
29 i2c0 = &i2c0; 29 i2c0 = &i2c0;
30 }; 30 };
31 31
32 mbus@f1000000 { 32 mbus@f1000000 {
33 compatible = "marvell,kirkwood 33 compatible = "marvell,kirkwood-mbus", "simple-bus";
34 #address-cells = <2>; 34 #address-cells = <2>;
35 #size-cells = <1>; 35 #size-cells = <1>;
36 /* If a board file needs to ch 36 /* If a board file needs to change this ranges it must replace it completely */
37 ranges = <MBUS_ID(0xf0, 0x01) 37 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
38 MBUS_ID(0x01, 0x2f) 38 MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
39 MBUS_ID(0x03, 0x01) 39 MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
40 >; 40 >;
41 controller = <&mbusc>; 41 controller = <&mbusc>;
42 pcie-mem-aperture = <0xe000000 42 pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
43 pcie-io-aperture = <0xf200000 43 pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
44 44
45 nand: nand@12f { 45 nand: nand@12f {
46 #address-cells = <1>; 46 #address-cells = <1>;
47 #size-cells = <1>; 47 #size-cells = <1>;
48 cle = <0>; 48 cle = <0>;
49 ale = <1>; 49 ale = <1>;
50 bank-width = <1>; 50 bank-width = <1>;
51 compatible = "marvell, 51 compatible = "marvell,orion-nand";
52 reg = <MBUS_ID(0x01, 0 52 reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
53 chip-delay = <25>; 53 chip-delay = <25>;
54 /* set partition map a 54 /* set partition map and/or chip-delay in board dts */
55 clocks = <&gate_clk 7> 55 clocks = <&gate_clk 7>;
56 pinctrl-0 = <&pmx_nand 56 pinctrl-0 = <&pmx_nand>;
57 pinctrl-names = "defau 57 pinctrl-names = "default";
58 status = "disabled"; 58 status = "disabled";
59 }; 59 };
60 60
61 crypto_sram: sa-sram@301 { 61 crypto_sram: sa-sram@301 {
62 compatible = "mmio-sra 62 compatible = "mmio-sram";
63 reg = <MBUS_ID(0x03, 0 63 reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
64 clocks = <&gate_clk 17 64 clocks = <&gate_clk 17>;
65 #address-cells = <1>; 65 #address-cells = <1>;
66 #size-cells = <1>; 66 #size-cells = <1>;
67 }; 67 };
68 }; 68 };
69 69
70 ocp@f1000000 { 70 ocp@f1000000 {
71 compatible = "simple-bus"; 71 compatible = "simple-bus";
72 ranges = <0x00000000 0xf100000 72 ranges = <0x00000000 0xf1000000 0x0100000>;
73 #address-cells = <1>; 73 #address-cells = <1>;
74 #size-cells = <1>; 74 #size-cells = <1>;
75 75
76 pinctrl: pin-controller@10000 76 pinctrl: pin-controller@10000 {
77 /* set compatible prop 77 /* set compatible property in SoC file */
78 reg = <0x10000 0x20>; 78 reg = <0x10000 0x20>;
79 79
80 pmx_ge1: pmx-ge1 { 80 pmx_ge1: pmx-ge1 {
81 marvell,pins = 81 marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
82 82 "mpp24", "mpp25", "mpp26", "mpp27",
83 83 "mpp30", "mpp31", "mpp32", "mpp33";
84 marvell,functi 84 marvell,function = "ge1";
85 }; 85 };
86 86
87 pmx_nand: pmx-nand { 87 pmx_nand: pmx-nand {
88 marvell,pins = 88 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
89 89 "mpp4", "mpp5", "mpp18", "mpp19";
90 marvell,functi 90 marvell,function = "nand";
91 }; 91 };
92 92
93 /* 93 /*
94 * Default SPI0 pinctr 94 * Default SPI0 pinctrl setting with CSn on mpp0,
95 * overwrite marvell,p 95 * overwrite marvell,pins on board level if required.
96 */ 96 */
97 pmx_spi: pmx-spi { 97 pmx_spi: pmx-spi {
98 marvell,pins = 98 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
99 marvell,functi 99 marvell,function = "spi";
100 }; 100 };
101 101
102 pmx_twsi0: pmx-twsi0 { 102 pmx_twsi0: pmx-twsi0 {
103 marvell,pins = 103 marvell,pins = "mpp8", "mpp9";
104 marvell,functi 104 marvell,function = "twsi0";
105 }; 105 };
106 106
107 /* 107 /*
108 * Default UART pinctr 108 * Default UART pinctrl setting without RTS/CTS,
109 * overwrite marvell,p 109 * overwrite marvell,pins on board level if required.
110 */ 110 */
111 pmx_uart0: pmx-uart0 { 111 pmx_uart0: pmx-uart0 {
112 marvell,pins = 112 marvell,pins = "mpp10", "mpp11";
113 marvell,functi 113 marvell,function = "uart0";
114 }; 114 };
115 115
116 pmx_uart1: pmx-uart1 { 116 pmx_uart1: pmx-uart1 {
117 marvell,pins = 117 marvell,pins = "mpp13", "mpp14";
118 marvell,functi 118 marvell,function = "uart1";
119 }; 119 };
120 }; 120 };
121 121
122 core_clk: core-clocks@10030 { 122 core_clk: core-clocks@10030 {
123 compatible = "marvell, 123 compatible = "marvell,kirkwood-core-clock";
124 reg = <0x10030 0x4>; 124 reg = <0x10030 0x4>;
125 #clock-cells = <1>; 125 #clock-cells = <1>;
126 }; 126 };
127 127
128 spi0: spi@10600 { 128 spi0: spi@10600 {
129 compatible = "marvell, 129 compatible = "marvell,orion-spi";
130 #address-cells = <1>; 130 #address-cells = <1>;
131 #size-cells = <0>; 131 #size-cells = <0>;
132 cell-index = <0>; 132 cell-index = <0>;
133 interrupts = <23>; 133 interrupts = <23>;
134 reg = <0x10600 0x28>; 134 reg = <0x10600 0x28>;
135 clocks = <&gate_clk 7> 135 clocks = <&gate_clk 7>;
136 pinctrl-0 = <&pmx_spi> 136 pinctrl-0 = <&pmx_spi>;
137 pinctrl-names = "defau 137 pinctrl-names = "default";
138 status = "disabled"; 138 status = "disabled";
139 }; 139 };
140 140
141 gpio0: gpio@10100 { 141 gpio0: gpio@10100 {
142 compatible = "marvell, 142 compatible = "marvell,orion-gpio";
143 #gpio-cells = <2>; 143 #gpio-cells = <2>;
144 gpio-controller; 144 gpio-controller;
145 reg = <0x10100 0x40>; 145 reg = <0x10100 0x40>;
146 ngpios = <32>; 146 ngpios = <32>;
147 interrupt-controller; 147 interrupt-controller;
148 #interrupt-cells = <2> 148 #interrupt-cells = <2>;
149 interrupts = <35>, <36 149 interrupts = <35>, <36>, <37>, <38>;
150 clocks = <&gate_clk 7> 150 clocks = <&gate_clk 7>;
151 }; 151 };
152 152
153 gpio1: gpio@10140 { 153 gpio1: gpio@10140 {
154 compatible = "marvell, 154 compatible = "marvell,orion-gpio";
155 #gpio-cells = <2>; 155 #gpio-cells = <2>;
156 gpio-controller; 156 gpio-controller;
157 reg = <0x10140 0x40>; 157 reg = <0x10140 0x40>;
158 ngpios = <18>; 158 ngpios = <18>;
159 interrupt-controller; 159 interrupt-controller;
160 #interrupt-cells = <2> 160 #interrupt-cells = <2>;
161 interrupts = <39>, <40 161 interrupts = <39>, <40>, <41>;
162 clocks = <&gate_clk 7> 162 clocks = <&gate_clk 7>;
163 }; 163 };
164 164
165 i2c0: i2c@11000 { 165 i2c0: i2c@11000 {
166 compatible = "marvell, 166 compatible = "marvell,mv64xxx-i2c";
167 reg = <0x11000 0x20>; 167 reg = <0x11000 0x20>;
168 #address-cells = <1>; 168 #address-cells = <1>;
169 #size-cells = <0>; 169 #size-cells = <0>;
170 interrupts = <29>; 170 interrupts = <29>;
171 clock-frequency = <100 171 clock-frequency = <100000>;
172 clocks = <&gate_clk 7> 172 clocks = <&gate_clk 7>;
173 pinctrl-0 = <&pmx_twsi 173 pinctrl-0 = <&pmx_twsi0>;
174 pinctrl-names = "defau 174 pinctrl-names = "default";
175 status = "disabled"; 175 status = "disabled";
176 }; 176 };
177 177
178 uart0: serial@12000 { 178 uart0: serial@12000 {
179 compatible = "ns16550a 179 compatible = "ns16550a";
180 reg = <0x12000 0x100>; 180 reg = <0x12000 0x100>;
181 reg-shift = <2>; 181 reg-shift = <2>;
182 interrupts = <33>; 182 interrupts = <33>;
183 clocks = <&gate_clk 7> 183 clocks = <&gate_clk 7>;
184 pinctrl-0 = <&pmx_uart 184 pinctrl-0 = <&pmx_uart0>;
185 pinctrl-names = "defau 185 pinctrl-names = "default";
186 status = "disabled"; 186 status = "disabled";
187 }; 187 };
188 188
189 uart1: serial@12100 { 189 uart1: serial@12100 {
190 compatible = "ns16550a 190 compatible = "ns16550a";
191 reg = <0x12100 0x100>; 191 reg = <0x12100 0x100>;
192 reg-shift = <2>; 192 reg-shift = <2>;
193 interrupts = <34>; 193 interrupts = <34>;
194 clocks = <&gate_clk 7> 194 clocks = <&gate_clk 7>;
195 pinctrl-0 = <&pmx_uart 195 pinctrl-0 = <&pmx_uart1>;
196 pinctrl-names = "defau 196 pinctrl-names = "default";
197 status = "disabled"; 197 status = "disabled";
198 }; 198 };
199 199
200 mbusc: mbus-controller@20000 { 200 mbusc: mbus-controller@20000 {
201 compatible = "marvell, 201 compatible = "marvell,mbus-controller";
202 reg = <0x20000 0x80>, 202 reg = <0x20000 0x80>, <0x1500 0x20>;
203 }; 203 };
204 204
205 sysc: system-controller@20000 205 sysc: system-controller@20000 {
206 compatible = "marvell, 206 compatible = "marvell,orion-system-controller";
207 reg = <0x20000 0x120>; 207 reg = <0x20000 0x120>;
208 }; 208 };
209 209
210 bridge_intc: bridge-interrupt- 210 bridge_intc: bridge-interrupt-ctrl@20110 {
211 compatible = "marvell, 211 compatible = "marvell,orion-bridge-intc";
212 interrupt-controller; 212 interrupt-controller;
213 #interrupt-cells = <1> 213 #interrupt-cells = <1>;
214 reg = <0x20110 0x8>; 214 reg = <0x20110 0x8>;
215 interrupts = <1>; 215 interrupts = <1>;
216 marvell,#interrupts = 216 marvell,#interrupts = <6>;
217 }; 217 };
218 218
219 gate_clk: clock-gating-control 219 gate_clk: clock-gating-control@2011c {
220 compatible = "marvell, 220 compatible = "marvell,kirkwood-gating-clock";
221 reg = <0x2011c 0x4>; 221 reg = <0x2011c 0x4>;
222 clocks = <&core_clk 0> 222 clocks = <&core_clk 0>;
223 #clock-cells = <1>; 223 #clock-cells = <1>;
224 }; 224 };
225 225
226 l2: l2-cache@20128 { 226 l2: l2-cache@20128 {
227 compatible = "marvell, 227 compatible = "marvell,kirkwood-cache";
228 reg = <0x20128 0x4>; 228 reg = <0x20128 0x4>;
229 }; 229 };
230 230
231 intc: interrupt-controller@202 231 intc: interrupt-controller@20200 {
232 compatible = "marvell, 232 compatible = "marvell,orion-intc";
233 interrupt-controller; 233 interrupt-controller;
234 #interrupt-cells = <1> 234 #interrupt-cells = <1>;
235 reg = <0x20200 0x10>, 235 reg = <0x20200 0x10>, <0x20210 0x10>;
236 }; 236 };
237 237
238 timer: timer@20300 { 238 timer: timer@20300 {
239 compatible = "marvell, 239 compatible = "marvell,orion-timer";
240 reg = <0x20300 0x20>; 240 reg = <0x20300 0x20>;
241 interrupt-parent = <&b 241 interrupt-parent = <&bridge_intc>;
242 interrupts = <1>, <2>; 242 interrupts = <1>, <2>;
243 clocks = <&core_clk 0> 243 clocks = <&core_clk 0>;
244 }; 244 };
245 245
246 wdt: watchdog-timer@20300 { 246 wdt: watchdog-timer@20300 {
247 compatible = "marvell, 247 compatible = "marvell,orion-wdt";
248 reg = <0x20300 0x28>, 248 reg = <0x20300 0x28>, <0x20108 0x4>;
249 interrupt-parent = <&b 249 interrupt-parent = <&bridge_intc>;
250 interrupts = <3>; 250 interrupts = <3>;
251 clocks = <&gate_clk 7> 251 clocks = <&gate_clk 7>;
252 status = "okay"; 252 status = "okay";
253 }; 253 };
254 254
255 cesa: crypto@30000 { 255 cesa: crypto@30000 {
256 compatible = "marvell, 256 compatible = "marvell,kirkwood-crypto";
257 reg = <0x30000 0x10000 257 reg = <0x30000 0x10000>;
258 reg-names = "regs"; 258 reg-names = "regs";
259 interrupts = <22>; 259 interrupts = <22>;
260 clocks = <&gate_clk 17 260 clocks = <&gate_clk 17>;
261 marvell,crypto-srams = 261 marvell,crypto-srams = <&crypto_sram>;
262 marvell,crypto-sram-si 262 marvell,crypto-sram-size = <0x800>;
263 status = "okay"; 263 status = "okay";
264 }; 264 };
265 265
266 usb0: ehci@50000 { 266 usb0: ehci@50000 {
267 compatible = "marvell, 267 compatible = "marvell,orion-ehci";
268 reg = <0x50000 0x1000> 268 reg = <0x50000 0x1000>;
269 interrupts = <19>; 269 interrupts = <19>;
270 clocks = <&gate_clk 3> 270 clocks = <&gate_clk 3>;
271 status = "okay"; 271 status = "okay";
272 }; 272 };
273 273
274 dma0: xor@60800 { 274 dma0: xor@60800 {
275 compatible = "marvell, 275 compatible = "marvell,orion-xor";
276 reg = <0x60800 0x100 276 reg = <0x60800 0x100
277 0x60A00 0x100>; 277 0x60A00 0x100>;
278 status = "okay"; 278 status = "okay";
279 clocks = <&gate_clk 8> 279 clocks = <&gate_clk 8>;
280 280
281 xor00 { 281 xor00 {
282 interrupts = < 282 interrupts = <5>;
283 dmacap,memcpy; 283 dmacap,memcpy;
284 dmacap,xor; 284 dmacap,xor;
285 }; 285 };
286 xor01 { 286 xor01 {
287 interrupts = < 287 interrupts = <6>;
288 dmacap,memcpy; 288 dmacap,memcpy;
289 dmacap,xor; 289 dmacap,xor;
290 dmacap,memset; 290 dmacap,memset;
291 }; 291 };
292 }; 292 };
293 293
294 dma1: xor@60900 { 294 dma1: xor@60900 {
295 compatible = "marvell, 295 compatible = "marvell,orion-xor";
296 reg = <0x60900 0x100 296 reg = <0x60900 0x100
297 0x60B00 0x100>; 297 0x60B00 0x100>;
298 status = "okay"; 298 status = "okay";
299 clocks = <&gate_clk 16 299 clocks = <&gate_clk 16>;
300 300
301 xor00 { 301 xor00 {
302 interrupts = < 302 interrupts = <7>;
303 dmacap,memcpy; 303 dmacap,memcpy;
304 dmacap,xor; 304 dmacap,xor;
305 }; 305 };
306 xor01 { 306 xor01 {
307 interrupts = < 307 interrupts = <8>;
308 dmacap,memcpy; 308 dmacap,memcpy;
309 dmacap,xor; 309 dmacap,xor;
310 dmacap,memset; 310 dmacap,memset;
311 }; 311 };
312 }; 312 };
313 313
314 eth0: ethernet-controller@7200 314 eth0: ethernet-controller@72000 {
315 compatible = "marvell, 315 compatible = "marvell,kirkwood-eth";
316 #address-cells = <1>; 316 #address-cells = <1>;
317 #size-cells = <0>; 317 #size-cells = <0>;
318 reg = <0x72000 0x4000> 318 reg = <0x72000 0x4000>;
319 clocks = <&gate_clk 0> 319 clocks = <&gate_clk 0>;
320 marvell,tx-checksum-li 320 marvell,tx-checksum-limit = <1600>;
321 status = "disabled"; 321 status = "disabled";
322 322
323 eth0port: ethernet0-po 323 eth0port: ethernet0-port@0 {
324 compatible = " 324 compatible = "marvell,kirkwood-eth-port";
325 reg = <0>; 325 reg = <0>;
326 interrupts = < 326 interrupts = <11>;
327 /* overwrite M 327 /* overwrite MAC address in bootloader */
328 local-mac-addr 328 local-mac-address = [00 00 00 00 00 00];
329 /* set phy-han 329 /* set phy-handle property in board file */
330 }; 330 };
331 }; 331 };
332 332
333 mdio: mdio-bus@72004 { 333 mdio: mdio-bus@72004 {
334 compatible = "marvell, 334 compatible = "marvell,orion-mdio";
335 #address-cells = <1>; 335 #address-cells = <1>;
336 #size-cells = <0>; 336 #size-cells = <0>;
337 reg = <0x72004 0x84>; 337 reg = <0x72004 0x84>;
338 interrupts = <46>; 338 interrupts = <46>;
339 clocks = <&gate_clk 0> 339 clocks = <&gate_clk 0>;
340 status = "disabled"; 340 status = "disabled";
341 341
342 /* add phy nodes in bo 342 /* add phy nodes in board file */
343 }; 343 };
344 344
345 eth1: ethernet-controller@7600 345 eth1: ethernet-controller@76000 {
346 compatible = "marvell, 346 compatible = "marvell,kirkwood-eth";
347 #address-cells = <1>; 347 #address-cells = <1>;
348 #size-cells = <0>; 348 #size-cells = <0>;
349 reg = <0x76000 0x4000> 349 reg = <0x76000 0x4000>;
350 clocks = <&gate_clk 19 350 clocks = <&gate_clk 19>;
351 marvell,tx-checksum-li 351 marvell,tx-checksum-limit = <1600>;
352 pinctrl-0 = <&pmx_ge1> 352 pinctrl-0 = <&pmx_ge1>;
353 pinctrl-names = "defau 353 pinctrl-names = "default";
354 status = "disabled"; 354 status = "disabled";
355 355
356 eth1port: ethernet1-po 356 eth1port: ethernet1-port@0 {
357 compatible = " 357 compatible = "marvell,kirkwood-eth-port";
358 reg = <0>; 358 reg = <0>;
359 interrupts = < 359 interrupts = <15>;
360 /* overwrite M 360 /* overwrite MAC address in bootloader */
361 local-mac-addr 361 local-mac-address = [00 00 00 00 00 00];
362 /* set phy-han 362 /* set phy-handle property in board file */
363 }; 363 };
364 }; 364 };
365 365
366 sata_phy0: sata-phy@82000 { 366 sata_phy0: sata-phy@82000 {
367 compatible = "marvell, 367 compatible = "marvell,mvebu-sata-phy";
368 reg = <0x82000 0x0334> 368 reg = <0x82000 0x0334>;
369 clocks = <&gate_clk 14 369 clocks = <&gate_clk 14>;
370 clock-names = "sata"; 370 clock-names = "sata";
371 #phy-cells = <0>; 371 #phy-cells = <0>;
372 status = "okay"; 372 status = "okay";
373 }; 373 };
374 374
375 sata_phy1: sata-phy@84000 { 375 sata_phy1: sata-phy@84000 {
376 compatible = "marvell, 376 compatible = "marvell,mvebu-sata-phy";
377 reg = <0x84000 0x0334> 377 reg = <0x84000 0x0334>;
378 clocks = <&gate_clk 15 378 clocks = <&gate_clk 15>;
379 clock-names = "sata"; 379 clock-names = "sata";
380 #phy-cells = <0>; 380 #phy-cells = <0>;
381 status = "okay"; 381 status = "okay";
382 }; 382 };
383 383
384 audio0: audio-controller@a0000 384 audio0: audio-controller@a0000 {
385 compatible = "marvell, 385 compatible = "marvell,kirkwood-audio";
386 #sound-dai-cells = <0> 386 #sound-dai-cells = <0>;
387 reg = <0xa0000 0x2210> 387 reg = <0xa0000 0x2210>;
388 interrupts = <24>; 388 interrupts = <24>;
389 clocks = <&gate_clk 9> 389 clocks = <&gate_clk 9>;
390 clock-names = "interna 390 clock-names = "internal";
391 status = "disabled"; 391 status = "disabled";
392 }; 392 };
393 }; 393 };
394 }; 394 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.