1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (C) 2021 PHYTEC Messtechnik GmbH 3 * Copyright (C) 2021 PHYTEC Messtechnik GmbH
4 * Author: Yunus Bas <y.bas@phytec.de> 4 * Author: Yunus Bas <y.bas@phytec.de>
5 */ 5 */
6 6
7 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
9 9
10 / { 10 / {
11 reg_wl_en: regulator-wl-en { 11 reg_wl_en: regulator-wl-en {
12 compatible = "regulator-fixed" 12 compatible = "regulator-fixed";
13 regulator-name = "wlan_en"; 13 regulator-name = "wlan_en";
14 regulator-min-microvolt = <330 14 regulator-min-microvolt = <3300000>;
15 regulator-max-microvolt = <330 15 regulator-max-microvolt = <3300000>;
16 pinctrl-names = "default"; 16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_wl>; 17 pinctrl-0 = <&pinctrl_wl>;
18 gpio = <&gpio5 2 GPIO_ACTIVE_H 18 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
19 enable-active-high; 19 enable-active-high;
20 startup-delay-us = <100>; 20 startup-delay-us = <100>;
21 status = "disabled"; 21 status = "disabled";
22 }; 22 };
23 }; 23 };
24 24
25 &uart3 { 25 &uart3 {
26 pinctrl-names = "default"; 26 pinctrl-names = "default";
27 pinctrl-0 = <&pinctrl_uart3_bt>; 27 pinctrl-0 = <&pinctrl_uart3_bt>;
28 uart-has-rtscts; 28 uart-has-rtscts;
29 29
30 bluetooth { 30 bluetooth {
31 compatible = "brcm,bcm43438-bt 31 compatible = "brcm,bcm43438-bt";
32 shutdown-gpios = <&gpio7 0 GPI 32 shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
33 device-wakeup-gpios = <&gpio7 33 device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
34 host-wakeup-gpios = <&gpio5 26 34 host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
35 status = "disabled"; 35 status = "disabled";
36 }; 36 };
37 }; 37 };
38 38
39 &usdhc3 { 39 &usdhc3 {
40 #address-cells = <1>; 40 #address-cells = <1>;
41 #size-cells = <0>; 41 #size-cells = <0>;
42 pinctrl-names = "default"; 42 pinctrl-names = "default";
43 pinctrl-0 = <&pinctrl_usdhc3_wl>; 43 pinctrl-0 = <&pinctrl_usdhc3_wl>;
44 vmmc-supply = <®_wl_en>; 44 vmmc-supply = <®_wl_en>;
45 bus-width = <4>; 45 bus-width = <4>;
46 non-removable; 46 non-removable;
47 no-1-8-v; 47 no-1-8-v;
48 status = "disabled"; 48 status = "disabled";
49 49
50 brmcf: wifi@1 { 50 brmcf: wifi@1 {
51 compatible = "brcm,bcm4329-fma 51 compatible = "brcm,bcm4329-fmac";
52 reg = <1>; 52 reg = <1>;
53 }; 53 };
54 }; 54 };
55 55
56 &iomuxc { 56 &iomuxc {
57 pinctrl_uart3_bt: uart3grp-bt { 57 pinctrl_uart3_bt: uart3grp-bt {
58 fsl,pins = < 58 fsl,pins = <
59 MX6QDL_PAD_EIM_D25__UA 59 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
60 MX6QDL_PAD_EIM_D24__UA 60 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
61 MX6QDL_PAD_EIM_EB3__UA 61 MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
62 MX6QDL_PAD_EIM_D23__UA 62 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
63 MX6QDL_PAD_SD3_DAT5__G 63 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0xb0b1 /* BT ENABLE */
64 MX6QDL_PAD_SD3_DAT4__G 64 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0xb0b1 /* DEV WAKEUP */
65 MX6QDL_PAD_CSI0_DAT8__ 65 MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0xb0b1 /* HOST WAKEUP */
66 >; 66 >;
67 }; 67 };
68 68
69 pinctrl_usdhc3_wl: usdhc3grp-wl { 69 pinctrl_usdhc3_wl: usdhc3grp-wl {
70 fsl,pins = < 70 fsl,pins = <
71 MX6QDL_PAD_SD3_CMD__SD 71 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
72 MX6QDL_PAD_SD3_CLK__SD 72 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
73 MX6QDL_PAD_SD3_DAT0__S 73 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
74 MX6QDL_PAD_SD3_DAT1__S 74 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
75 MX6QDL_PAD_SD3_DAT2__S 75 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
76 MX6QDL_PAD_SD3_DAT3__S 76 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
77 >; 77 >;
78 }; 78 };
79 79
80 pinctrl_wl: wlgrp { 80 pinctrl_wl: wlgrp {
81 fsl,pins = < 81 fsl,pins = <
82 MX6QDL_PAD_EIM_A25__GP 82 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0xb0b1 /* WLAN ENABLE */
83 >; 83 >;
84 }; 84 };
85 }; 85 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.