1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3
4 #include <dt-bindings/clock/qcom,gcc-msm8960.h
5 #include <dt-bindings/clock/qcom,lcc-msm8960.h
6 #include <dt-bindings/reset/qcom,gcc-msm8960.h
7 #include <dt-bindings/clock/qcom,mmcc-msm8960.
8 #include <dt-bindings/clock/qcom,rpmcc.h>
9 #include <dt-bindings/soc/qcom,gsbi.h>
10 #include <dt-bindings/interrupt-controller/irq
11 #include <dt-bindings/interrupt-controller/arm
12 / {
13 #address-cells = <1>;
14 #size-cells = <1>;
15 model = "Qualcomm APQ8064";
16 compatible = "qcom,apq8064";
17 interrupt-parent = <&intc>;
18
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
22 ranges;
23
24 smem_region: smem@80000000 {
25 reg = <0x80000000 0x20
26 no-map;
27 };
28
29 wcnss_mem: wcnss@8f000000 {
30 reg = <0x8f000000 0x70
31 no-map;
32 };
33 };
34
35 cpus {
36 #address-cells = <1>;
37 #size-cells = <0>;
38
39 CPU0: cpu@0 {
40 compatible = "qcom,kra
41 enable-method = "qcom,
42 device_type = "cpu";
43 reg = <0>;
44 next-level-cache = <&L
45 qcom,acc = <&acc0>;
46 qcom,saw = <&saw0>;
47 cpu-idle-states = <&CP
48 };
49
50 CPU1: cpu@1 {
51 compatible = "qcom,kra
52 enable-method = "qcom,
53 device_type = "cpu";
54 reg = <1>;
55 next-level-cache = <&L
56 qcom,acc = <&acc1>;
57 qcom,saw = <&saw1>;
58 cpu-idle-states = <&CP
59 };
60
61 CPU2: cpu@2 {
62 compatible = "qcom,kra
63 enable-method = "qcom,
64 device_type = "cpu";
65 reg = <2>;
66 next-level-cache = <&L
67 qcom,acc = <&acc2>;
68 qcom,saw = <&saw2>;
69 cpu-idle-states = <&CP
70 };
71
72 CPU3: cpu@3 {
73 compatible = "qcom,kra
74 enable-method = "qcom,
75 device_type = "cpu";
76 reg = <3>;
77 next-level-cache = <&L
78 qcom,acc = <&acc3>;
79 qcom,saw = <&saw3>;
80 cpu-idle-states = <&CP
81 };
82
83 L2: l2-cache {
84 compatible = "cache";
85 cache-level = <2>;
86 cache-unified;
87 };
88
89 idle-states {
90 CPU_SPC: cpu-spc {
91 compatible = "
92
93 entry-latency-
94 exit-latency-u
95 min-residency-
96 };
97 };
98 };
99
100 memory@0 {
101 device_type = "memory";
102 reg = <0x0 0x0>;
103 };
104
105 thermal-zones {
106 cpu0-thermal {
107 polling-delay-passive
108 polling-delay = <1000>
109
110 thermal-sensors = <&ts
111 coefficients = <1199 0
112
113 trips {
114 cpu_alert0: tr
115 temper
116 hyster
117 type =
118 };
119 cpu_crit0: tri
120 temper
121 hyster
122 type =
123 };
124 };
125 };
126
127 cpu1-thermal {
128 polling-delay-passive
129 polling-delay = <1000>
130
131 thermal-sensors = <&ts
132 coefficients = <1132 0
133
134 trips {
135 cpu_alert1: tr
136 temper
137 hyster
138 type =
139 };
140 cpu_crit1: tri
141 temper
142 hyster
143 type =
144 };
145 };
146 };
147
148 cpu2-thermal {
149 polling-delay-passive
150 polling-delay = <1000>
151
152 thermal-sensors = <&ts
153 coefficients = <1199 0
154
155 trips {
156 cpu_alert2: tr
157 temper
158 hyster
159 type =
160 };
161 cpu_crit2: tri
162 temper
163 hyster
164 type =
165 };
166 };
167 };
168
169 cpu3-thermal {
170 polling-delay-passive
171 polling-delay = <1000>
172
173 thermal-sensors = <&ts
174 coefficients = <1132 0
175
176 trips {
177 cpu_alert3: tr
178 temper
179 hyster
180 type =
181 };
182 cpu_crit3: tri
183 temper
184 hyster
185 type =
186 };
187 };
188 };
189 };
190
191 cpu-pmu {
192 compatible = "qcom,krait-pmu";
193 interrupts = <GIC_PPI 10 (GIC_
194 };
195
196 clocks {
197 cxo_board: cxo_board {
198 compatible = "fixed-cl
199 #clock-cells = <0>;
200 clock-frequency = <192
201 };
202
203 pxo_board: pxo_board {
204 compatible = "fixed-cl
205 #clock-cells = <0>;
206 clock-frequency = <270
207 };
208
209 sleep_clk: sleep_clk {
210 compatible = "fixed-cl
211 #clock-cells = <0>;
212 clock-frequency = <327
213 };
214 };
215
216 sfpb_mutex: hwmutex {
217 compatible = "qcom,sfpb-mutex"
218 syscon = <&sfpb_wrapper_mutex
219 #hwlock-cells = <1>;
220 };
221
222 smem {
223 compatible = "qcom,smem";
224 memory-region = <&smem_region>
225
226 hwlocks = <&sfpb_mutex 3>;
227 };
228
229 smsm {
230 compatible = "qcom,smsm";
231
232 #address-cells = <1>;
233 #size-cells = <0>;
234
235 qcom,ipc-1 = <&l2cc 8 4>;
236 qcom,ipc-2 = <&l2cc 8 14>;
237 qcom,ipc-3 = <&l2cc 8 23>;
238 qcom,ipc-4 = <&sps_sic_non_sec
239
240 apps_smsm: apps@0 {
241 reg = <0>;
242 #qcom,smem-state-cells
243 };
244
245 modem_smsm: modem@1 {
246 reg = <1>;
247 interrupts = <GIC_SPI
248
249 interrupt-controller;
250 #interrupt-cells = <2>
251 };
252
253 q6_smsm: q6@2 {
254 reg = <2>;
255 interrupts = <GIC_SPI
256
257 interrupt-controller;
258 #interrupt-cells = <2>
259 };
260
261 wcnss_smsm: wcnss@3 {
262 reg = <3>;
263 interrupts = <GIC_SPI
264
265 interrupt-controller;
266 #interrupt-cells = <2>
267 };
268
269 dsps_smsm: dsps@4 {
270 reg = <4>;
271 interrupts = <GIC_SPI
272
273 interrupt-controller;
274 #interrupt-cells = <2>
275 };
276 };
277
278 firmware {
279 scm {
280 compatible = "qcom,scm
281
282 clocks = <&rpmcc RPM_D
283 clock-names = "core";
284 };
285 };
286
287 soc: soc {
288 #address-cells = <1>;
289 #size-cells = <1>;
290 ranges;
291 compatible = "simple-bus";
292
293 tlmm_pinmux: pinctrl@800000 {
294 compatible = "qcom,apq
295 reg = <0x800000 0x4000
296
297 gpio-controller;
298 gpio-ranges = <&tlmm_p
299 #gpio-cells = <2>;
300 interrupt-controller;
301 #interrupt-cells = <2>
302 interrupts = <GIC_SPI
303
304 pinctrl-names = "defau
305 pinctrl-0 = <&ps_hold_
306 };
307
308 sfpb_wrapper_mutex: syscon@120
309 compatible = "syscon";
310 reg = <0x01200000 0x80
311 };
312
313 intc: interrupt-controller@200
314 compatible = "qcom,msm
315 interrupt-controller;
316 #interrupt-cells = <3>
317 reg = <0x02000000 0x10
318 <0x02002000 0x10
319 };
320
321 timer@200a000 {
322 compatible = "qcom,kps
323 "qcom,msm
324 interrupts = <GIC_PPI
325 <GIC_PPI
326 <GIC_PPI
327 reg = <0x0200a000 0x10
328 clock-frequency = <270
329 cpu-offset = <0x80000>
330 };
331
332 acc0: clock-controller@2088000
333 compatible = "qcom,kps
334 reg = <0x02088000 0x10
335 clocks = <&gcc PLL8_VO
336 clock-names = "pll8_vo
337 clock-output-names = "
338 #clock-cells = <0>;
339 };
340
341 acc1: clock-controller@2098000
342 compatible = "qcom,kps
343 reg = <0x02098000 0x10
344 clocks = <&gcc PLL8_VO
345 clock-names = "pll8_vo
346 clock-output-names = "
347 #clock-cells = <0>;
348 };
349
350 acc2: clock-controller@20a8000
351 compatible = "qcom,kps
352 reg = <0x020a8000 0x10
353 clocks = <&gcc PLL8_VO
354 clock-names = "pll8_vo
355 clock-output-names = "
356 #clock-cells = <0>;
357 };
358
359 acc3: clock-controller@20b8000
360 compatible = "qcom,kps
361 reg = <0x020b8000 0x10
362 clocks = <&gcc PLL8_VO
363 clock-names = "pll8_vo
364 clock-output-names = "
365 #clock-cells = <0>;
366 };
367
368 saw0: power-manager@2089000 {
369 compatible = "qcom,apq
370 reg = <0x02089000 0x10
371
372 saw0_vreg: regulator {
373 regulator-min-
374 regulator-max-
375 };
376 };
377
378 saw1: power-manager@2099000 {
379 compatible = "qcom,apq
380 reg = <0x02099000 0x10
381
382 saw1_vreg: regulator {
383 regulator-min-
384 regulator-max-
385 };
386 };
387
388 saw2: power-manager@20a9000 {
389 compatible = "qcom,apq
390 reg = <0x020a9000 0x10
391
392 saw2_vreg: regulator {
393 regulator-min-
394 regulator-max-
395 };
396 };
397
398 saw3: power-manager@20b9000 {
399 compatible = "qcom,apq
400 reg = <0x020b9000 0x10
401
402 saw3_vreg: regulator {
403 regulator-min-
404 regulator-max-
405 };
406 };
407
408 sps_sic_non_secure: sps-sic-no
409 compatible = "syscon";
410 reg = <0x12100000 0x10
411 };
412
413 gsbi1: gsbi@12440000 {
414 status = "disabled";
415 compatible = "qcom,gsb
416 cell-index = <1>;
417 reg = <0x12440000 0x10
418 clocks = <&gcc GSBI1_H
419 clock-names = "iface";
420 #address-cells = <1>;
421 #size-cells = <1>;
422 ranges;
423
424 syscon-tcsr = <&tcsr>;
425
426 gsbi1_serial: serial@1
427 compatible = "
428 reg = <0x12450
429 <0x12400
430 interrupts = <
431 clocks = <&gcc
432 clock-names =
433 status = "disa
434 };
435
436 gsbi1_i2c: i2c@1246000
437 compatible = "
438 pinctrl-0 = <&
439 pinctrl-1 = <&
440 pinctrl-names
441 reg = <0x12460
442 interrupts = <
443 clocks = <&gcc
444 clock-names =
445 #address-cells
446 #size-cells =
447 status = "disa
448 };
449
450 };
451
452 gsbi2: gsbi@12480000 {
453 status = "disabled";
454 compatible = "qcom,gsb
455 cell-index = <2>;
456 reg = <0x12480000 0x10
457 clocks = <&gcc GSBI2_H
458 clock-names = "iface";
459 #address-cells = <1>;
460 #size-cells = <1>;
461 ranges;
462
463 syscon-tcsr = <&tcsr>;
464
465 gsbi2_i2c: i2c@124a000
466 compatible = "
467 reg = <0x124a0
468 pinctrl-0 = <&
469 pinctrl-1 = <&
470 pinctrl-names
471 interrupts = <
472 clocks = <&gcc
473 clock-names =
474 #address-cells
475 #size-cells =
476 status = "disa
477 };
478 };
479
480 gsbi3: gsbi@16200000 {
481 status = "disabled";
482 compatible = "qcom,gsb
483 cell-index = <3>;
484 reg = <0x16200000 0x10
485 clocks = <&gcc GSBI3_H
486 clock-names = "iface";
487 #address-cells = <1>;
488 #size-cells = <1>;
489 ranges;
490 gsbi3_i2c: i2c@1628000
491 compatible = "
492 pinctrl-0 = <&
493 pinctrl-1 = <&
494 pinctrl-names
495 reg = <0x16280
496 interrupts = <
497 clocks = <&gcc
498 <&gcc
499 clock-names =
500 #address-cells
501 #size-cells =
502 status = "disa
503 };
504 };
505
506 gsbi4: gsbi@16300000 {
507 status = "disabled";
508 compatible = "qcom,gsb
509 cell-index = <4>;
510 reg = <0x16300000 0x03
511 clocks = <&gcc GSBI4_H
512 clock-names = "iface";
513 #address-cells = <1>;
514 #size-cells = <1>;
515 ranges;
516
517 gsbi4_serial: serial@1
518 compatible = "
519 reg = <0x16340
520 <0x16300
521 interrupts = <
522 pinctrl-0 = <&
523 pinctrl-names
524 clocks = <&gcc
525 clock-names =
526 status = "disa
527 };
528
529 gsbi4_i2c: i2c@1638000
530 compatible = "
531 pinctrl-0 = <&
532 pinctrl-1 = <&
533 pinctrl-names
534 reg = <0x16380
535 interrupts = <
536 clocks = <&gcc
537 <&gcc
538 clock-names =
539 status = "disa
540 };
541 };
542
543 gsbi5: gsbi@1a200000 {
544 status = "disabled";
545 compatible = "qcom,gsb
546 cell-index = <5>;
547 reg = <0x1a200000 0x03
548 clocks = <&gcc GSBI5_H
549 clock-names = "iface";
550 #address-cells = <1>;
551 #size-cells = <1>;
552 ranges;
553
554 gsbi5_serial: serial@1
555 compatible = "
556 reg = <0x1a240
557 <0x1a200
558 interrupts = <
559 clocks = <&gcc
560 clock-names =
561 status = "disa
562 };
563
564 gsbi5_spi: spi@1a28000
565 compatible = "
566 reg = <0x1a280
567 interrupts = <
568 pinctrl-0 = <&
569 pinctrl-1 = <&
570 pinctrl-names
571 clocks = <&gcc
572 clock-names =
573 status = "disa
574 #address-cells
575 #size-cells =
576 };
577 };
578
579 gsbi6: gsbi@16500000 {
580 status = "disabled";
581 compatible = "qcom,gsb
582 cell-index = <6>;
583 reg = <0x16500000 0x03
584 clocks = <&gcc GSBI6_H
585 clock-names = "iface";
586 #address-cells = <1>;
587 #size-cells = <1>;
588 ranges;
589
590 gsbi6_serial: serial@1
591 compatible = "
592 reg = <0x16540
593 <0x16500
594 interrupts = <
595 clocks = <&gcc
596 clock-names =
597 status = "disa
598 };
599
600 gsbi6_i2c: i2c@1658000
601 compatible = "
602 pinctrl-0 = <&
603 pinctrl-1 = <&
604 pinctrl-names
605 reg = <0x16580
606 interrupts = <
607 clocks = <&gcc
608 <&gcc
609 clock-names =
610 status = "disa
611 };
612 };
613
614 gsbi7: gsbi@16600000 {
615 status = "disabled";
616 compatible = "qcom,gsb
617 cell-index = <7>;
618 reg = <0x16600000 0x10
619 clocks = <&gcc GSBI7_H
620 clock-names = "iface";
621 #address-cells = <1>;
622 #size-cells = <1>;
623 ranges;
624 syscon-tcsr = <&tcsr>;
625
626 gsbi7_serial: serial@1
627 compatible = "
628 reg = <0x16640
629 <0x16600
630 interrupts = <
631 clocks = <&gcc
632 clock-names =
633 status = "disa
634 };
635
636 gsbi7_i2c: i2c@1668000
637 compatible = "
638 pinctrl-0 = <&
639 pinctrl-1 = <&
640 pinctrl-names
641 reg = <0x16680
642 interrupts = <
643 clocks = <&gcc
644 <&gcc
645 clock-names =
646 status = "disa
647 };
648 };
649
650 rng@1a500000 {
651 compatible = "qcom,prn
652 reg = <0x1a500000 0x20
653 clocks = <&gcc PRNG_CL
654 clock-names = "core";
655 };
656
657 ssbi2: ssbi@c00000 {
658 compatible = "qcom,ssb
659 reg = <0x00c00000 0x10
660 qcom,controller-type =
661 };
662
663 ssbi: ssbi@500000 {
664 compatible = "qcom,ssb
665 reg = <0x00500000 0x10
666 qcom,controller-type =
667 };
668
669 qfprom: efuse@700000 {
670 compatible = "qcom,apq
671 reg = <0x00700000 0x10
672 #address-cells = <1>;
673 #size-cells = <1>;
674
675 tsens_calib: calib@404
676 reg = <0x404 0
677 };
678 tsens_backup: backup_c
679 reg = <0x414 0
680 };
681 };
682
683 gcc: clock-controller@900000 {
684 compatible = "qcom,gcc
685 reg = <0x00900000 0x40
686 #clock-cells = <1>;
687 #reset-cells = <1>;
688 clocks = <&cxo_board>,
689 <&pxo_board>,
690 <&lcc PLL4>;
691 clock-names = "cxo", "
692
693 tsens: thermal-sensor
694 compatible = "
695
696 nvmem-cells =
697 nvmem-cell-nam
698 interrupts = <
699 interrupt-name
700
701 #qcom,sensors
702 #thermal-senso
703 };
704 };
705
706 lcc: clock-controller@28000000
707 compatible = "qcom,lcc
708 reg = <0x28000000 0x10
709 #clock-cells = <1>;
710 #reset-cells = <1>;
711 clocks = <&pxo_board>,
712 <&gcc PLL4_VO
713 <0>,
714 <0>, <0>,
715 <0>, <0>,
716 <0>;
717 clock-names = "pxo",
718 "pll4_vo
719 "mi2s_co
720 "codec_i
721 "spare_i
722 "codec_i
723 "spare_i
724 "pcm_cod
725 };
726
727 mmcc: clock-controller@4000000
728 compatible = "qcom,mmc
729 reg = <0x4000000 0x100
730 #clock-cells = <1>;
731 #power-domain-cells =
732 #reset-cells = <1>;
733 clocks = <&pxo_board>,
734 <&gcc PLL3>,
735 <&gcc PLL8_VO
736 <&dsi0_phy 1>
737 <&dsi0_phy 0>
738 <&dsi1_phy 1>
739 <&dsi1_phy 0>
740 <&hdmi_phy>;
741 clock-names = "pxo",
742 "pll3",
743 "pll8_vo
744 "dsi1pll
745 "dsi1pll
746 "dsi2pll
747 "dsi2pll
748 "hdmipll
749 };
750
751 l2cc: clock-controller@2011000
752 compatible = "qcom,kps
753 reg = <0x2011000 0x100
754 clocks = <&gcc PLL8_VO
755 clock-names = "pll8_vo
756 #clock-cells = <0>;
757 };
758
759 rpm: rpm@108000 {
760 compatible = "qcom,rpm
761 reg = <0x108000 0x1000
762 qcom,ipc = <&l2cc 0x8
763
764 interrupts = <GIC_SPI
765 <GIC_SPI
766 <GIC_SPI
767 interrupt-names = "ack
768
769 rpmcc: clock-controlle
770 compatible = "
771 #clock-cells =
772 clocks = <&pxo
773 clock-names =
774 };
775 };
776
777 usb1: usb@12500000 {
778 compatible = "qcom,ci-
779 reg = <0x12500000 0x20
780 <0x12500200 0x20
781 interrupts = <GIC_SPI
782 clocks = <&gcc USB_HS1
783 clock-names = "core",
784 assigned-clocks = <&gc
785 assigned-clock-rates =
786 resets = <&gcc USB_HS1
787 reset-names = "core";
788 phy_type = "ulpi";
789 ahb-burst-config = <0>
790 phys = <&usb_hs1_phy>;
791 phy-names = "usb-phy";
792 status = "disabled";
793 #reset-cells = <1>;
794
795 ulpi {
796 usb_hs1_phy: p
797 compat
798
799 clocks
800 clock-
801 resets
802 reset-
803 #phy-c
804 };
805 };
806 };
807
808 usb3: usb@12520000 {
809 compatible = "qcom,ci-
810 reg = <0x12520000 0x20
811 <0x12520200 0x20
812 interrupts = <GIC_SPI
813 clocks = <&gcc USB_HS3
814 clock-names = "core",
815 assigned-clocks = <&gc
816 assigned-clock-rates =
817 resets = <&gcc USB_HS3
818 reset-names = "core";
819 phy_type = "ulpi";
820 ahb-burst-config = <0>
821 phys = <&usb_hs3_phy>;
822 phy-names = "usb-phy";
823 status = "disabled";
824 #reset-cells = <1>;
825
826 ulpi {
827 usb_hs3_phy: p
828 compat
829
830 #phy-c
831 clocks
832 clock-
833 resets
834 reset-
835 };
836 };
837 };
838
839 usb4: usb@12530000 {
840 compatible = "qcom,ci-
841 reg = <0x12530000 0x20
842 <0x12530200 0x20
843 interrupts = <GIC_SPI
844 clocks = <&gcc USB_HS4
845 clock-names = "core",
846 assigned-clocks = <&gc
847 assigned-clock-rates =
848 resets = <&gcc USB_HS4
849 reset-names = "core";
850 phy_type = "ulpi";
851 ahb-burst-config = <0>
852 phys = <&usb_hs4_phy>;
853 phy-names = "usb-phy";
854 status = "disabled";
855 #reset-cells = <1>;
856
857 ulpi {
858 usb_hs4_phy: p
859 compat
860
861 #phy-c
862 clocks
863 clock-
864 resets
865 reset-
866 };
867 };
868 };
869
870 sata_phy0: phy@1b400000 {
871 compatible = "qcom,apq
872 status = "disabled";
873 reg = <0x1b400000 0x20
874 clocks = <&gcc SATA_PH
875 clock-names = "cfg";
876 #phy-cells = <0>;
877 };
878
879 sata0: sata@29000000 {
880 compatible = "qcom,apq
881 status = "disabled";
882 reg = <0x29000000
883 interrupts = <GIC_SPI
884
885 clocks = <&gcc SFAB_SA
886 <&gcc SATA_H_
887 <&gcc SATA_A_
888 <&gcc SATA_RX
889 <&gcc SATA_PM
890 clock-names = "slave_i
891 "iface",
892 "core",
893 "rxoob",
894 "pmalive
895
896 assigned-clocks = <&gc
897 <&gc
898 assigned-clock-rates =
899
900 phys = <&sata_phy0>;
901 phy-names = "sata-phy"
902 ports-implemented = <0
903 };
904
905 sdcc3: mmc@12180000 {
906 compatible = "arm,pl18
907 arm,primecell-periphid
908 status = "disabled";
909 reg = <0x12180000 0x20
910 interrupts = <GIC_SPI
911 clocks = <&gcc SDC3_CL
912 clock-names = "mclk",
913 bus-width = <4>;
914 cap-sd-highspeed;
915 cap-mmc-highspeed;
916 max-frequency = <19200
917 no-1-8-v;
918 dmas = <&sdcc3bam 2>,
919 dma-names = "tx", "rx"
920 };
921
922 sdcc3bam: dma-controller@12182
923 compatible = "qcom,bam
924 reg = <0x12182000 0x80
925 interrupts = <GIC_SPI
926 clocks = <&gcc SDC3_H_
927 clock-names = "bam_clk
928 #dma-cells = <1>;
929 qcom,ee = <0>;
930 };
931
932 sdcc4: mmc@121c0000 {
933 compatible = "arm,pl18
934 arm,primecell-periphid
935 status = "disabled";
936 reg = <0x121c0000 0x20
937 interrupts = <GIC_SPI
938 clocks = <&gcc SDC4_CL
939 clock-names = "mclk",
940 bus-width = <4>;
941 cap-sd-highspeed;
942 cap-mmc-highspeed;
943 max-frequency = <48000
944 dmas = <&sdcc4bam 2>,
945 dma-names = "tx", "rx"
946 pinctrl-names = "defau
947 pinctrl-0 = <&sdc4_def
948 };
949
950 sdcc4bam: dma-controller@121c2
951 compatible = "qcom,bam
952 reg = <0x121c2000 0x80
953 interrupts = <GIC_SPI
954 clocks = <&gcc SDC4_H_
955 clock-names = "bam_clk
956 #dma-cells = <1>;
957 qcom,ee = <0>;
958 };
959
960 sdcc1: mmc@12400000 {
961 status = "disabled";
962 compatible = "arm,pl18
963 pinctrl-names = "defau
964 pinctrl-0 = <&sdcc1_de
965 arm,primecell-periphid
966 reg = <0x12400000 0x20
967 interrupts = <GIC_SPI
968 clocks = <&gcc SDC1_CL
969 clock-names = "mclk",
970 bus-width = <8>;
971 max-frequency = <96000
972 non-removable;
973 cap-sd-highspeed;
974 cap-mmc-highspeed;
975 dmas = <&sdcc1bam 2>,
976 dma-names = "tx", "rx"
977 };
978
979 sdcc1bam: dma-controller@12402
980 compatible = "qcom,bam
981 reg = <0x12402000 0x80
982 interrupts = <GIC_SPI
983 clocks = <&gcc SDC1_H_
984 clock-names = "bam_clk
985 #dma-cells = <1>;
986 qcom,ee = <0>;
987 };
988
989 tcsr: syscon@1a400000 {
990 compatible = "qcom,tcs
991 reg = <0x1a400000 0x10
992 };
993
994 gpu: gpu@4300000 {
995 compatible = "qcom,adr
996 reg = <0x04300000 0x20
997 reg-names = "kgsl_3d0_
998 interrupts = <GIC_SPI
999 interrupt-names = "kgs
1000 clock-names =
1001 "core",
1002 "iface",
1003 "mem",
1004 "mem_iface";
1005 clocks =
1006 <&mmcc GFX3D_CLK>
1007 <&mmcc GFX3D_AHB_
1008 <&mmcc GFX3D_AXI_
1009 <&mmcc MMSS_IMEM_
1010
1011 iommus = <&gfx3d 0
1012 &gfx3d 1
1013 &gfx3d 2
1014 &gfx3d 3
1015 &gfx3d 4
1016 &gfx3d 5
1017 &gfx3d 6
1018 &gfx3d 7
1019 &gfx3d 8
1020 &gfx3d 9
1021 &gfx3d 10
1022 &gfx3d 11
1023 &gfx3d 12
1024 &gfx3d 13
1025 &gfx3d 14
1026 &gfx3d 15
1027 &gfx3d 16
1028 &gfx3d 17
1029 &gfx3d 18
1030 &gfx3d 19
1031 &gfx3d 20
1032 &gfx3d 21
1033 &gfx3d 22
1034 &gfx3d 23
1035 &gfx3d 24
1036 &gfx3d 25
1037 &gfx3d 26
1038 &gfx3d 27
1039 &gfx3d 28
1040 &gfx3d 29
1041 &gfx3d 30
1042 &gfx3d 31
1043 &gfx3d1 0
1044 &gfx3d1 1
1045 &gfx3d1 2
1046 &gfx3d1 3
1047 &gfx3d1 4
1048 &gfx3d1 5
1049 &gfx3d1 6
1050 &gfx3d1 7
1051 &gfx3d1 8
1052 &gfx3d1 9
1053 &gfx3d1 10
1054 &gfx3d1 11
1055 &gfx3d1 12
1056 &gfx3d1 13
1057 &gfx3d1 14
1058 &gfx3d1 15
1059 &gfx3d1 16
1060 &gfx3d1 17
1061 &gfx3d1 18
1062 &gfx3d1 19
1063 &gfx3d1 20
1064 &gfx3d1 21
1065 &gfx3d1 22
1066 &gfx3d1 23
1067 &gfx3d1 24
1068 &gfx3d1 25
1069 &gfx3d1 26
1070 &gfx3d1 27
1071 &gfx3d1 28
1072 &gfx3d1 29
1073 &gfx3d1 30
1074 &gfx3d1 31>
1075
1076 operating-points-v2 =
1077
1078 gpu_opp_table: opp-ta
1079 compatible =
1080
1081 opp-450000000
1082 opp-h
1083 };
1084
1085 opp-27000000
1086 opp-h
1087 };
1088 };
1089 };
1090
1091 mmss_sfpb: syscon@5700000 {
1092 compatible = "syscon"
1093 reg = <0x5700000 0x70
1094 };
1095
1096 dsi0: dsi@4700000 {
1097 compatible = "qcom,ap
1098 "qcom,md
1099 #address-cells = <1>;
1100 #size-cells = <0>;
1101 interrupts = <GIC_SPI
1102 reg = <0x04700000 0x2
1103 reg-names = "dsi_ctrl
1104
1105 clocks = <&mmcc DSI_M
1106 <&mmcc DSI_S_
1107 <&mmcc AMP_AH
1108 <&mmcc DSI_CL
1109 <&mmcc DSI1_B
1110 <&mmcc DSI_PI
1111 <&mmcc DSI1_E
1112 clock-names = "iface"
1113 "src"
1114 "core
1115
1116 assigned-clocks = <&m
1117 <&mmc
1118 <&mmc
1119 <&mmc
1120 assigned-clock-parent
1121
1122
1123
1124 syscon-sfpb = <&mmss_
1125 phys = <&dsi0_phy>;
1126 status = "disabled";
1127
1128 ports {
1129 #address-cell
1130 #size-cells =
1131
1132 port@0 {
1133 reg =
1134 dsi0_
1135 };
1136 };
1137
1138 port@1 {
1139 reg =
1140 dsi0_
1141 };
1142 };
1143 };
1144 };
1145
1146
1147 dsi0_phy: phy@4700200 {
1148 compatible = "qcom,ds
1149 #clock-cells = <1>;
1150 #phy-cells = <0>;
1151
1152 reg = <0x04700200 0x1
1153 <0x04700300 0
1154 <0x04700500 0
1155 reg-names = "dsi_pll"
1156 clock-names = "iface"
1157 clocks = <&mmcc DSI_M
1158 <&pxo_board>
1159 status = "disabled";
1160 };
1161
1162 dsi1: dsi@5800000 {
1163 compatible = "qcom,md
1164 interrupts = <GIC_SPI
1165 reg = <0x05800000 0x2
1166 reg-names = "dsi_ctrl
1167
1168 clocks = <&mmcc DSI2_
1169 <&mmcc DSI2_
1170 <&mmcc AMP_A
1171 <&mmcc DSI2_
1172 <&mmcc DSI2_
1173 <&mmcc DSI2_
1174 <&mmcc DSI2_
1175 clock-names = "iface"
1176 "bus",
1177 "core_m
1178 "src",
1179 "byte",
1180 "pixel"
1181 "core";
1182
1183 assigned-clocks = <&m
1184 <&m
1185 <&m
1186 <&m
1187 assigned-clock-parent
1188
1189
1190
1191
1192 syscon-sfpb = <&mmss_
1193 phys = <&dsi1_phy>;
1194
1195 #address-cells = <1>;
1196 #size-cells = <0>;
1197
1198 status = "disabled";
1199
1200 ports {
1201 #address-cell
1202 #size-cells =
1203
1204 port@0 {
1205 reg =
1206 dsi1_
1207 };
1208 };
1209
1210 port@1 {
1211 reg =
1212 dsi1_
1213 };
1214 };
1215 };
1216 };
1217
1218
1219 dsi1_phy: dsi-phy@5800200 {
1220 compatible = "qcom,ds
1221 reg = <0x05800200 0x1
1222 <0x05800300 0x2
1223 <0x05800500 0x5
1224 reg-names = "dsi_pll"
1225 "dsi_phy"
1226 "dsi_phy_
1227 clock-names = "iface"
1228 "ref";
1229 clocks = <&mmcc DSI2_
1230 <&pxo_board>
1231 #clock-cells = <1>;
1232 #phy-cells = <0>;
1233
1234 status = "disabled";
1235 };
1236
1237 mdp_port0: iommu@7500000 {
1238 compatible = "qcom,ap
1239 #iommu-cells = <1>;
1240 clock-names =
1241 "smmu_pclk",
1242 "iommu_clk";
1243 clocks =
1244 <&mmcc SMMU_AHB_C
1245 <&mmcc MDP_AXI_CL
1246 reg = <0x07500000 0x1
1247 interrupts =
1248 <GIC_SPI 63 IRQ_T
1249 <GIC_SPI 64 IRQ_T
1250 qcom,ncb = <2>;
1251 };
1252
1253 mdp_port1: iommu@7600000 {
1254 compatible = "qcom,ap
1255 #iommu-cells = <1>;
1256 clock-names =
1257 "smmu_pclk",
1258 "iommu_clk";
1259 clocks =
1260 <&mmcc SMMU_AHB_C
1261 <&mmcc MDP_AXI_CL
1262 reg = <0x07600000 0x1
1263 interrupts =
1264 <GIC_SPI 61 IRQ_T
1265 <GIC_SPI 62 IRQ_T
1266 qcom,ncb = <2>;
1267 };
1268
1269 gfx3d: iommu@7c00000 {
1270 compatible = "qcom,ap
1271 #iommu-cells = <1>;
1272 clock-names =
1273 "smmu_pclk",
1274 "iommu_clk";
1275 clocks =
1276 <&mmcc SMMU_AHB_C
1277 <&mmcc GFX3D_AXI_
1278 reg = <0x07c00000 0x1
1279 interrupts =
1280 <GIC_SPI 69 IRQ_T
1281 <GIC_SPI 70 IRQ_T
1282 qcom,ncb = <3>;
1283 };
1284
1285 gfx3d1: iommu@7d00000 {
1286 compatible = "qcom,ap
1287 #iommu-cells = <1>;
1288 clock-names =
1289 "smmu_pclk",
1290 "iommu_clk";
1291 clocks =
1292 <&mmcc SMMU_AHB_C
1293 <&mmcc GFX3D_AXI_
1294 reg = <0x07d00000 0x1
1295 interrupts =
1296 <GIC_SPI 210 IRQ_
1297 <GIC_SPI 211 IRQ_
1298 qcom,ncb = <3>;
1299 };
1300
1301 pcie: pcie@1b500000 {
1302 compatible = "qcom,pc
1303 reg = <0x1b500000 0x1
1304 <0x1b502000 0x8
1305 <0x1b600000 0x1
1306 <0x0ff00000 0x1
1307 reg-names = "dbi", "e
1308 device_type = "pci";
1309 linux,pci-domain = <0
1310 bus-range = <0x00 0xf
1311 num-lanes = <1>;
1312 #address-cells = <3>;
1313 #size-cells = <2>;
1314 ranges = <0x81000000
1315 <0x82000000
1316 interrupts = <GIC_SPI
1317 interrupt-names = "ms
1318 #interrupt-cells = <1
1319 interrupt-map-mask =
1320 interrupt-map = <0 0
1321 <0 0
1322 <0 0
1323 <0 0
1324 clocks = <&gcc PCIE_A
1325 <&gcc PCIE_H
1326 <&gcc PCIE_P
1327 clock-names = "core",
1328 resets = <&gcc PCIE_A
1329 <&gcc PCIE_H
1330 <&gcc PCIE_P
1331 <&gcc PCIE_P
1332 <&gcc PCIE_P
1333 reset-names = "axi",
1334 status = "disabled";
1335
1336 pcie@0 {
1337 device_type =
1338 reg = <0x0 0x
1339 bus-range = <
1340
1341 #address-cell
1342 #size-cells =
1343 ranges;
1344 };
1345 };
1346
1347 hdmi: hdmi-tx@4a00000 {
1348 compatible = "qcom,hd
1349 pinctrl-names = "defa
1350 pinctrl-0 = <&hdmi_pi
1351 reg = <0x04a00000 0x2
1352 reg-names = "core_phy
1353 interrupts = <GIC_SPI
1354 clocks = <&mmcc HDMI_
1355 <&mmcc HDMI_
1356 <&mmcc HDMI_
1357 clock-names = "core",
1358 "master
1359 "slave_
1360
1361 phys = <&hdmi_phy>;
1362
1363 status = "disabled";
1364
1365 ports {
1366 #address-cell
1367 #size-cells =
1368
1369 port@0 {
1370 reg =
1371 hdmi_
1372 };
1373 };
1374
1375 port@1 {
1376 reg =
1377 hdmi_
1378 };
1379 };
1380 };
1381 };
1382
1383 hdmi_phy: phy@4a00400 {
1384 compatible = "qcom,hd
1385 reg = <0x4a00400 0x60
1386 <0x4a00500 0x10
1387 reg-names = "hdmi_phy
1388 "hdmi_pll
1389
1390 clocks = <&mmcc HDMI_
1391 clock-names = "slave_
1392 #phy-cells = <0>;
1393 #clock-cells = <0>;
1394
1395 status = "disabled";
1396 };
1397
1398 mdp: display-controller@51000
1399 compatible = "qcom,md
1400 reg = <0x05100000 0xf
1401 interrupts = <GIC_SPI
1402 clocks = <&mmcc MDP_C
1403 <&mmcc MDP_A
1404 <&mmcc MDP_A
1405 <&mmcc MDP_L
1406 <&mmcc HDMI_
1407 <&mmcc MDP_T
1408 clock-names = "core_c
1409 "iface_
1410 "bus_cl
1411 "lut_cl
1412 "hdmi_c
1413 "tv_clk
1414
1415 iommus = <&mdp_port0
1416 &mdp_port0
1417 &mdp_port1
1418 &mdp_port1
1419
1420 ports {
1421 #address-cell
1422 #size-cells =
1423
1424 port@0 {
1425 reg =
1426 mdp_l
1427 };
1428 };
1429
1430 port@1 {
1431 reg =
1432 mdp_d
1433 };
1434 };
1435
1436 port@2 {
1437 reg =
1438 mdp_d
1439 };
1440 };
1441
1442 port@3 {
1443 reg =
1444 mdp_d
1445 };
1446 };
1447 };
1448 };
1449
1450 riva: riva-pil@3200800 {
1451 compatible = "qcom,ri
1452
1453 reg = <0x03200800 0x1
1454 reg-names = "ccu", "d
1455
1456 interrupts-extended =
1457
1458 interrupt-names = "wd
1459
1460 memory-region = <&wcn
1461
1462 status = "disabled";
1463
1464 iris {
1465 compatible =
1466
1467 clocks = <&cx
1468 clock-names =
1469 };
1470
1471 smd-edge {
1472 interrupts =
1473
1474 qcom,ipc = <&
1475 qcom,smd-edge
1476
1477 label = "riva
1478
1479 wcnss {
1480 compa
1481 qcom,
1482
1483 qcom,
1484
1485 bluet
1486
1487 };
1488
1489 wifi
1490
1491
1492
1493
1494
1495
1496
1497
1498 };
1499 };
1500 };
1501 };
1502
1503 etb@1a01000 {
1504 compatible = "arm,cor
1505 reg = <0x1a01000 0x10
1506
1507 clocks = <&rpmcc RPM_
1508 clock-names = "apb_pc
1509
1510 in-ports {
1511 port {
1512 etb_i
1513
1514 };
1515 };
1516 };
1517 };
1518
1519 tpiu@1a03000 {
1520 compatible = "arm,cor
1521 reg = <0x1a03000 0x10
1522
1523 clocks = <&rpmcc RPM_
1524 clock-names = "apb_pc
1525
1526 in-ports {
1527 port {
1528 tpiu_
1529
1530 };
1531 };
1532 };
1533 };
1534
1535 replicator {
1536 compatible = "arm,cor
1537
1538 clocks = <&rpmcc RPM_
1539 clock-names = "apb_pc
1540
1541 out-ports {
1542 #address-cell
1543 #size-cells =
1544
1545 port@0 {
1546 reg =
1547 repli
1548
1549 };
1550 };
1551 port@1 {
1552 reg =
1553 repli
1554
1555 };
1556 };
1557 };
1558
1559 in-ports {
1560 port {
1561 repli
1562
1563 };
1564 };
1565 };
1566 };
1567
1568 funnel@1a04000 {
1569 compatible = "arm,cor
1570 reg = <0x1a04000 0x10
1571
1572 clocks = <&rpmcc RPM_
1573 clock-names = "apb_pc
1574
1575 in-ports {
1576 #address-cell
1577 #size-cells =
1578
1579 /*
1580 * Not descri
1581 * 2 - connec
1582 * 3 - not-co
1583 * 6 - not-co
1584 * 7 - not-co
1585 */
1586 port@0 {
1587 reg =
1588 funne
1589
1590 };
1591 };
1592 port@1 {
1593 reg =
1594 funne
1595
1596 };
1597 };
1598 port@4 {
1599 reg =
1600 funne
1601
1602 };
1603 };
1604 port@5 {
1605 reg =
1606 funne
1607
1608 };
1609 };
1610 };
1611
1612 out-ports {
1613 port {
1614 funne
1615
1616 };
1617 };
1618 };
1619 };
1620
1621 etm@1a1c000 {
1622 compatible = "arm,cor
1623 reg = <0x1a1c000 0x10
1624
1625 clocks = <&rpmcc RPM_
1626 clock-names = "apb_pc
1627
1628 cpu = <&CPU0>;
1629
1630 out-ports {
1631 port {
1632 etm0_
1633
1634 };
1635 };
1636 };
1637 };
1638
1639 etm@1a1d000 {
1640 compatible = "arm,cor
1641 reg = <0x1a1d000 0x10
1642
1643 clocks = <&rpmcc RPM_
1644 clock-names = "apb_pc
1645
1646 cpu = <&CPU1>;
1647
1648 out-ports {
1649 port {
1650 etm1_
1651
1652 };
1653 };
1654 };
1655 };
1656
1657 etm@1a1e000 {
1658 compatible = "arm,cor
1659 reg = <0x1a1e000 0x10
1660
1661 clocks = <&rpmcc RPM_
1662 clock-names = "apb_pc
1663
1664 cpu = <&CPU2>;
1665
1666 out-ports {
1667 port {
1668 etm2_
1669
1670 };
1671 };
1672 };
1673 };
1674
1675 etm@1a1f000 {
1676 compatible = "arm,cor
1677 reg = <0x1a1f000 0x10
1678
1679 clocks = <&rpmcc RPM_
1680 clock-names = "apb_pc
1681
1682 cpu = <&CPU3>;
1683
1684 out-ports {
1685 port {
1686 etm3_
1687
1688 };
1689 };
1690 };
1691 };
1692 };
1693 };
1694 #include "qcom-apq8064-pins.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.