1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/; 2 /dts-v1/;
3 3
4 #include <dt-bindings/clock/qcom,gcc-msm8960.h 4 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
5 #include <dt-bindings/clock/qcom,lcc-msm8960.h 5 #include <dt-bindings/clock/qcom,lcc-msm8960.h>
6 #include <dt-bindings/reset/qcom,gcc-msm8960.h 6 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
7 #include <dt-bindings/clock/qcom,mmcc-msm8960. 7 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
8 #include <dt-bindings/clock/qcom,rpmcc.h> 8 #include <dt-bindings/clock/qcom,rpmcc.h>
9 #include <dt-bindings/soc/qcom,gsbi.h> 9 #include <dt-bindings/soc/qcom,gsbi.h>
10 #include <dt-bindings/interrupt-controller/irq 10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/interrupt-controller/arm 11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 / { 12 / {
13 #address-cells = <1>; 13 #address-cells = <1>;
14 #size-cells = <1>; 14 #size-cells = <1>;
15 model = "Qualcomm APQ8064"; 15 model = "Qualcomm APQ8064";
16 compatible = "qcom,apq8064"; 16 compatible = "qcom,apq8064";
17 interrupt-parent = <&intc>; 17 interrupt-parent = <&intc>;
18 18
19 reserved-memory { 19 reserved-memory {
20 #address-cells = <1>; 20 #address-cells = <1>;
21 #size-cells = <1>; 21 #size-cells = <1>;
22 ranges; 22 ranges;
23 23
24 smem_region: smem@80000000 { 24 smem_region: smem@80000000 {
25 reg = <0x80000000 0x20 25 reg = <0x80000000 0x200000>;
26 no-map; 26 no-map;
27 }; 27 };
28 28
29 wcnss_mem: wcnss@8f000000 { 29 wcnss_mem: wcnss@8f000000 {
30 reg = <0x8f000000 0x70 30 reg = <0x8f000000 0x700000>;
31 no-map; 31 no-map;
32 }; 32 };
33 }; 33 };
34 34
35 cpus { 35 cpus {
36 #address-cells = <1>; 36 #address-cells = <1>;
37 #size-cells = <0>; 37 #size-cells = <0>;
38 38
39 CPU0: cpu@0 { 39 CPU0: cpu@0 {
40 compatible = "qcom,kra 40 compatible = "qcom,krait";
41 enable-method = "qcom, 41 enable-method = "qcom,kpss-acc-v1";
42 device_type = "cpu"; 42 device_type = "cpu";
43 reg = <0>; 43 reg = <0>;
44 next-level-cache = <&L 44 next-level-cache = <&L2>;
45 qcom,acc = <&acc0>; 45 qcom,acc = <&acc0>;
46 qcom,saw = <&saw0>; 46 qcom,saw = <&saw0>;
47 cpu-idle-states = <&CP 47 cpu-idle-states = <&CPU_SPC>;
48 }; 48 };
49 49
50 CPU1: cpu@1 { 50 CPU1: cpu@1 {
51 compatible = "qcom,kra 51 compatible = "qcom,krait";
52 enable-method = "qcom, 52 enable-method = "qcom,kpss-acc-v1";
53 device_type = "cpu"; 53 device_type = "cpu";
54 reg = <1>; 54 reg = <1>;
55 next-level-cache = <&L 55 next-level-cache = <&L2>;
56 qcom,acc = <&acc1>; 56 qcom,acc = <&acc1>;
57 qcom,saw = <&saw1>; 57 qcom,saw = <&saw1>;
58 cpu-idle-states = <&CP 58 cpu-idle-states = <&CPU_SPC>;
59 }; 59 };
60 60
61 CPU2: cpu@2 { 61 CPU2: cpu@2 {
62 compatible = "qcom,kra 62 compatible = "qcom,krait";
63 enable-method = "qcom, 63 enable-method = "qcom,kpss-acc-v1";
64 device_type = "cpu"; 64 device_type = "cpu";
65 reg = <2>; 65 reg = <2>;
66 next-level-cache = <&L 66 next-level-cache = <&L2>;
67 qcom,acc = <&acc2>; 67 qcom,acc = <&acc2>;
68 qcom,saw = <&saw2>; 68 qcom,saw = <&saw2>;
69 cpu-idle-states = <&CP 69 cpu-idle-states = <&CPU_SPC>;
70 }; 70 };
71 71
72 CPU3: cpu@3 { 72 CPU3: cpu@3 {
73 compatible = "qcom,kra 73 compatible = "qcom,krait";
74 enable-method = "qcom, 74 enable-method = "qcom,kpss-acc-v1";
75 device_type = "cpu"; 75 device_type = "cpu";
76 reg = <3>; 76 reg = <3>;
77 next-level-cache = <&L 77 next-level-cache = <&L2>;
78 qcom,acc = <&acc3>; 78 qcom,acc = <&acc3>;
79 qcom,saw = <&saw3>; 79 qcom,saw = <&saw3>;
80 cpu-idle-states = <&CP 80 cpu-idle-states = <&CPU_SPC>;
81 }; 81 };
82 82
83 L2: l2-cache { 83 L2: l2-cache {
84 compatible = "cache"; 84 compatible = "cache";
85 cache-level = <2>; 85 cache-level = <2>;
86 cache-unified; 86 cache-unified;
87 }; 87 };
88 88
89 idle-states { 89 idle-states {
90 CPU_SPC: cpu-spc { !! 90 CPU_SPC: spc {
91 compatible = " 91 compatible = "qcom,idle-state-spc",
92 92 "arm,idle-state";
93 entry-latency- 93 entry-latency-us = <400>;
94 exit-latency-u 94 exit-latency-us = <900>;
95 min-residency- 95 min-residency-us = <3000>;
96 }; 96 };
97 }; 97 };
98 }; 98 };
99 99
100 memory@0 { 100 memory@0 {
101 device_type = "memory"; 101 device_type = "memory";
102 reg = <0x0 0x0>; 102 reg = <0x0 0x0>;
103 }; 103 };
104 104
105 thermal-zones { 105 thermal-zones {
106 cpu0-thermal { 106 cpu0-thermal {
107 polling-delay-passive 107 polling-delay-passive = <250>;
108 polling-delay = <1000> 108 polling-delay = <1000>;
109 109
110 thermal-sensors = <&ts 110 thermal-sensors = <&tsens 7>;
111 coefficients = <1199 0 111 coefficients = <1199 0>;
112 112
113 trips { 113 trips {
114 cpu_alert0: tr 114 cpu_alert0: trip0 {
115 temper 115 temperature = <75000>;
116 hyster 116 hysteresis = <2000>;
117 type = 117 type = "passive";
118 }; 118 };
119 cpu_crit0: tri 119 cpu_crit0: trip1 {
120 temper 120 temperature = <110000>;
121 hyster 121 hysteresis = <2000>;
122 type = 122 type = "critical";
123 }; 123 };
124 }; 124 };
125 }; 125 };
126 126
127 cpu1-thermal { 127 cpu1-thermal {
128 polling-delay-passive 128 polling-delay-passive = <250>;
129 polling-delay = <1000> 129 polling-delay = <1000>;
130 130
131 thermal-sensors = <&ts 131 thermal-sensors = <&tsens 8>;
132 coefficients = <1132 0 132 coefficients = <1132 0>;
133 133
134 trips { 134 trips {
135 cpu_alert1: tr 135 cpu_alert1: trip0 {
136 temper 136 temperature = <75000>;
137 hyster 137 hysteresis = <2000>;
138 type = 138 type = "passive";
139 }; 139 };
140 cpu_crit1: tri 140 cpu_crit1: trip1 {
141 temper 141 temperature = <110000>;
142 hyster 142 hysteresis = <2000>;
143 type = 143 type = "critical";
144 }; 144 };
145 }; 145 };
146 }; 146 };
147 147
148 cpu2-thermal { 148 cpu2-thermal {
149 polling-delay-passive 149 polling-delay-passive = <250>;
150 polling-delay = <1000> 150 polling-delay = <1000>;
151 151
152 thermal-sensors = <&ts 152 thermal-sensors = <&tsens 9>;
153 coefficients = <1199 0 153 coefficients = <1199 0>;
154 154
155 trips { 155 trips {
156 cpu_alert2: tr 156 cpu_alert2: trip0 {
157 temper 157 temperature = <75000>;
158 hyster 158 hysteresis = <2000>;
159 type = 159 type = "passive";
160 }; 160 };
161 cpu_crit2: tri 161 cpu_crit2: trip1 {
162 temper 162 temperature = <110000>;
163 hyster 163 hysteresis = <2000>;
164 type = 164 type = "critical";
165 }; 165 };
166 }; 166 };
167 }; 167 };
168 168
169 cpu3-thermal { 169 cpu3-thermal {
170 polling-delay-passive 170 polling-delay-passive = <250>;
171 polling-delay = <1000> 171 polling-delay = <1000>;
172 172
173 thermal-sensors = <&ts 173 thermal-sensors = <&tsens 10>;
174 coefficients = <1132 0 174 coefficients = <1132 0>;
175 175
176 trips { 176 trips {
177 cpu_alert3: tr 177 cpu_alert3: trip0 {
178 temper 178 temperature = <75000>;
179 hyster 179 hysteresis = <2000>;
180 type = 180 type = "passive";
181 }; 181 };
182 cpu_crit3: tri 182 cpu_crit3: trip1 {
183 temper 183 temperature = <110000>;
184 hyster 184 hysteresis = <2000>;
185 type = 185 type = "critical";
186 }; 186 };
187 }; 187 };
188 }; 188 };
189 }; 189 };
190 190
191 cpu-pmu { 191 cpu-pmu {
192 compatible = "qcom,krait-pmu"; 192 compatible = "qcom,krait-pmu";
193 interrupts = <GIC_PPI 10 (GIC_ 193 interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
194 }; 194 };
195 195
196 clocks { 196 clocks {
197 cxo_board: cxo_board { 197 cxo_board: cxo_board {
198 compatible = "fixed-cl 198 compatible = "fixed-clock";
199 #clock-cells = <0>; 199 #clock-cells = <0>;
200 clock-frequency = <192 200 clock-frequency = <19200000>;
201 }; 201 };
202 202
203 pxo_board: pxo_board { 203 pxo_board: pxo_board {
204 compatible = "fixed-cl 204 compatible = "fixed-clock";
205 #clock-cells = <0>; 205 #clock-cells = <0>;
206 clock-frequency = <270 206 clock-frequency = <27000000>;
207 }; 207 };
208 208
209 sleep_clk: sleep_clk { 209 sleep_clk: sleep_clk {
210 compatible = "fixed-cl 210 compatible = "fixed-clock";
211 #clock-cells = <0>; 211 #clock-cells = <0>;
212 clock-frequency = <327 212 clock-frequency = <32768>;
213 }; 213 };
214 }; 214 };
215 215
216 sfpb_mutex: hwmutex { 216 sfpb_mutex: hwmutex {
217 compatible = "qcom,sfpb-mutex" 217 compatible = "qcom,sfpb-mutex";
218 syscon = <&sfpb_wrapper_mutex 218 syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
219 #hwlock-cells = <1>; 219 #hwlock-cells = <1>;
220 }; 220 };
221 221
222 smem { 222 smem {
223 compatible = "qcom,smem"; 223 compatible = "qcom,smem";
224 memory-region = <&smem_region> 224 memory-region = <&smem_region>;
225 225
226 hwlocks = <&sfpb_mutex 3>; 226 hwlocks = <&sfpb_mutex 3>;
227 }; 227 };
228 228
229 smsm { 229 smsm {
230 compatible = "qcom,smsm"; 230 compatible = "qcom,smsm";
231 231
232 #address-cells = <1>; 232 #address-cells = <1>;
233 #size-cells = <0>; 233 #size-cells = <0>;
234 234
235 qcom,ipc-1 = <&l2cc 8 4>; 235 qcom,ipc-1 = <&l2cc 8 4>;
236 qcom,ipc-2 = <&l2cc 8 14>; 236 qcom,ipc-2 = <&l2cc 8 14>;
237 qcom,ipc-3 = <&l2cc 8 23>; 237 qcom,ipc-3 = <&l2cc 8 23>;
238 qcom,ipc-4 = <&sps_sic_non_sec 238 qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
239 239
240 apps_smsm: apps@0 { 240 apps_smsm: apps@0 {
241 reg = <0>; 241 reg = <0>;
242 #qcom,smem-state-cells 242 #qcom,smem-state-cells = <1>;
243 }; 243 };
244 244
245 modem_smsm: modem@1 { 245 modem_smsm: modem@1 {
246 reg = <1>; 246 reg = <1>;
247 interrupts = <GIC_SPI 247 interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
248 248
249 interrupt-controller; 249 interrupt-controller;
250 #interrupt-cells = <2> 250 #interrupt-cells = <2>;
251 }; 251 };
252 252
253 q6_smsm: q6@2 { 253 q6_smsm: q6@2 {
254 reg = <2>; 254 reg = <2>;
255 interrupts = <GIC_SPI 255 interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
256 256
257 interrupt-controller; 257 interrupt-controller;
258 #interrupt-cells = <2> 258 #interrupt-cells = <2>;
259 }; 259 };
260 260
261 wcnss_smsm: wcnss@3 { 261 wcnss_smsm: wcnss@3 {
262 reg = <3>; 262 reg = <3>;
263 interrupts = <GIC_SPI 263 interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
264 264
265 interrupt-controller; 265 interrupt-controller;
266 #interrupt-cells = <2> 266 #interrupt-cells = <2>;
267 }; 267 };
268 268
269 dsps_smsm: dsps@4 { 269 dsps_smsm: dsps@4 {
270 reg = <4>; 270 reg = <4>;
271 interrupts = <GIC_SPI 271 interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
272 272
273 interrupt-controller; 273 interrupt-controller;
274 #interrupt-cells = <2> 274 #interrupt-cells = <2>;
275 }; 275 };
276 }; 276 };
277 277
278 firmware { 278 firmware {
279 scm { 279 scm {
280 compatible = "qcom,scm 280 compatible = "qcom,scm-apq8064", "qcom,scm";
281 281
282 clocks = <&rpmcc RPM_D 282 clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
283 clock-names = "core"; 283 clock-names = "core";
284 }; 284 };
285 }; 285 };
286 286
287 soc: soc { 287 soc: soc {
288 #address-cells = <1>; 288 #address-cells = <1>;
289 #size-cells = <1>; 289 #size-cells = <1>;
290 ranges; 290 ranges;
291 compatible = "simple-bus"; 291 compatible = "simple-bus";
292 292
293 tlmm_pinmux: pinctrl@800000 { 293 tlmm_pinmux: pinctrl@800000 {
294 compatible = "qcom,apq 294 compatible = "qcom,apq8064-pinctrl";
295 reg = <0x800000 0x4000 295 reg = <0x800000 0x4000>;
296 296
297 gpio-controller; 297 gpio-controller;
298 gpio-ranges = <&tlmm_p 298 gpio-ranges = <&tlmm_pinmux 0 0 90>;
299 #gpio-cells = <2>; 299 #gpio-cells = <2>;
300 interrupt-controller; 300 interrupt-controller;
301 #interrupt-cells = <2> 301 #interrupt-cells = <2>;
302 interrupts = <GIC_SPI 302 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
303 303
304 pinctrl-names = "defau 304 pinctrl-names = "default";
305 pinctrl-0 = <&ps_hold_ !! 305 pinctrl-0 = <&ps_hold>;
306 }; 306 };
307 307
308 sfpb_wrapper_mutex: syscon@120 308 sfpb_wrapper_mutex: syscon@1200000 {
309 compatible = "syscon"; 309 compatible = "syscon";
310 reg = <0x01200000 0x80 310 reg = <0x01200000 0x8000>;
311 }; 311 };
312 312
313 intc: interrupt-controller@200 313 intc: interrupt-controller@2000000 {
314 compatible = "qcom,msm 314 compatible = "qcom,msm-qgic2";
315 interrupt-controller; 315 interrupt-controller;
316 #interrupt-cells = <3> 316 #interrupt-cells = <3>;
317 reg = <0x02000000 0x10 317 reg = <0x02000000 0x1000>,
318 <0x02002000 0x10 318 <0x02002000 0x1000>;
319 }; 319 };
320 320
321 timer@200a000 { 321 timer@200a000 {
322 compatible = "qcom,kps 322 compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
323 "qcom,msm 323 "qcom,msm-timer";
324 interrupts = <GIC_PPI 324 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
325 <GIC_PPI 325 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
326 <GIC_PPI 326 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
327 reg = <0x0200a000 0x10 327 reg = <0x0200a000 0x100>;
328 clock-frequency = <270 328 clock-frequency = <27000000>;
329 cpu-offset = <0x80000> 329 cpu-offset = <0x80000>;
330 }; 330 };
331 331
332 acc0: clock-controller@2088000 332 acc0: clock-controller@2088000 {
333 compatible = "qcom,kps 333 compatible = "qcom,kpss-acc-v1";
334 reg = <0x02088000 0x10 334 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
335 clocks = <&gcc PLL8_VO 335 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
336 clock-names = "pll8_vo 336 clock-names = "pll8_vote", "pxo";
337 clock-output-names = " 337 clock-output-names = "acpu0_aux";
338 #clock-cells = <0>; 338 #clock-cells = <0>;
339 }; 339 };
340 340
341 acc1: clock-controller@2098000 341 acc1: clock-controller@2098000 {
342 compatible = "qcom,kps 342 compatible = "qcom,kpss-acc-v1";
343 reg = <0x02098000 0x10 343 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
344 clocks = <&gcc PLL8_VO 344 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
345 clock-names = "pll8_vo 345 clock-names = "pll8_vote", "pxo";
346 clock-output-names = " 346 clock-output-names = "acpu1_aux";
347 #clock-cells = <0>; 347 #clock-cells = <0>;
348 }; 348 };
349 349
350 acc2: clock-controller@20a8000 350 acc2: clock-controller@20a8000 {
351 compatible = "qcom,kps 351 compatible = "qcom,kpss-acc-v1";
352 reg = <0x020a8000 0x10 352 reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
353 clocks = <&gcc PLL8_VO 353 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
354 clock-names = "pll8_vo 354 clock-names = "pll8_vote", "pxo";
355 clock-output-names = " 355 clock-output-names = "acpu2_aux";
356 #clock-cells = <0>; 356 #clock-cells = <0>;
357 }; 357 };
358 358
359 acc3: clock-controller@20b8000 359 acc3: clock-controller@20b8000 {
360 compatible = "qcom,kps 360 compatible = "qcom,kpss-acc-v1";
361 reg = <0x020b8000 0x10 361 reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
362 clocks = <&gcc PLL8_VO 362 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
363 clock-names = "pll8_vo 363 clock-names = "pll8_vote", "pxo";
364 clock-output-names = " 364 clock-output-names = "acpu3_aux";
365 #clock-cells = <0>; 365 #clock-cells = <0>;
366 }; 366 };
367 367
368 saw0: power-manager@2089000 { 368 saw0: power-manager@2089000 {
369 compatible = "qcom,apq 369 compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
370 reg = <0x02089000 0x10 370 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
371 371
372 saw0_vreg: regulator { 372 saw0_vreg: regulator {
373 regulator-min- 373 regulator-min-microvolt = <850000>;
374 regulator-max- 374 regulator-max-microvolt = <1300000>;
375 }; 375 };
376 }; 376 };
377 377
378 saw1: power-manager@2099000 { 378 saw1: power-manager@2099000 {
379 compatible = "qcom,apq 379 compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
380 reg = <0x02099000 0x10 380 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
381 381
382 saw1_vreg: regulator { 382 saw1_vreg: regulator {
383 regulator-min- 383 regulator-min-microvolt = <850000>;
384 regulator-max- 384 regulator-max-microvolt = <1300000>;
385 }; 385 };
386 }; 386 };
387 387
388 saw2: power-manager@20a9000 { 388 saw2: power-manager@20a9000 {
389 compatible = "qcom,apq 389 compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
390 reg = <0x020a9000 0x10 390 reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
391 391
392 saw2_vreg: regulator { 392 saw2_vreg: regulator {
393 regulator-min- 393 regulator-min-microvolt = <850000>;
394 regulator-max- 394 regulator-max-microvolt = <1300000>;
395 }; 395 };
396 }; 396 };
397 397
398 saw3: power-manager@20b9000 { 398 saw3: power-manager@20b9000 {
399 compatible = "qcom,apq 399 compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
400 reg = <0x020b9000 0x10 400 reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
401 401
402 saw3_vreg: regulator { 402 saw3_vreg: regulator {
403 regulator-min- 403 regulator-min-microvolt = <850000>;
404 regulator-max- 404 regulator-max-microvolt = <1300000>;
405 }; 405 };
406 }; 406 };
407 407
408 sps_sic_non_secure: sps-sic-no 408 sps_sic_non_secure: sps-sic-non-secure@12100000 {
409 compatible = "syscon"; 409 compatible = "syscon";
410 reg = <0x12100000 0x10 410 reg = <0x12100000 0x10000>;
411 }; 411 };
412 412
413 gsbi1: gsbi@12440000 { 413 gsbi1: gsbi@12440000 {
414 status = "disabled"; 414 status = "disabled";
415 compatible = "qcom,gsb 415 compatible = "qcom,gsbi-v1.0.0";
416 cell-index = <1>; 416 cell-index = <1>;
417 reg = <0x12440000 0x10 417 reg = <0x12440000 0x100>;
418 clocks = <&gcc GSBI1_H 418 clocks = <&gcc GSBI1_H_CLK>;
419 clock-names = "iface"; 419 clock-names = "iface";
420 #address-cells = <1>; 420 #address-cells = <1>;
421 #size-cells = <1>; 421 #size-cells = <1>;
422 ranges; 422 ranges;
423 423
424 syscon-tcsr = <&tcsr>; 424 syscon-tcsr = <&tcsr>;
425 425
426 gsbi1_serial: serial@1 426 gsbi1_serial: serial@12450000 {
427 compatible = " 427 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
428 reg = <0x12450 428 reg = <0x12450000 0x100>,
429 <0x12400 429 <0x12400000 0x03>;
430 interrupts = < 430 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
431 clocks = <&gcc 431 clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
432 clock-names = 432 clock-names = "core", "iface";
433 status = "disa 433 status = "disabled";
434 }; 434 };
435 435
436 gsbi1_i2c: i2c@1246000 436 gsbi1_i2c: i2c@12460000 {
437 compatible = " 437 compatible = "qcom,i2c-qup-v1.1.1";
438 pinctrl-0 = <& !! 438 pinctrl-0 = <&i2c1_pins>;
439 pinctrl-1 = <& !! 439 pinctrl-1 = <&i2c1_pins_sleep>;
440 pinctrl-names 440 pinctrl-names = "default", "sleep";
441 reg = <0x12460 441 reg = <0x12460000 0x1000>;
442 interrupts = < 442 interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
443 clocks = <&gcc 443 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
444 clock-names = 444 clock-names = "core", "iface";
445 #address-cells 445 #address-cells = <1>;
446 #size-cells = 446 #size-cells = <0>;
447 status = "disa 447 status = "disabled";
448 }; 448 };
449 449
450 }; 450 };
451 451
452 gsbi2: gsbi@12480000 { 452 gsbi2: gsbi@12480000 {
453 status = "disabled"; 453 status = "disabled";
454 compatible = "qcom,gsb 454 compatible = "qcom,gsbi-v1.0.0";
455 cell-index = <2>; 455 cell-index = <2>;
456 reg = <0x12480000 0x10 456 reg = <0x12480000 0x100>;
457 clocks = <&gcc GSBI2_H 457 clocks = <&gcc GSBI2_H_CLK>;
458 clock-names = "iface"; 458 clock-names = "iface";
459 #address-cells = <1>; 459 #address-cells = <1>;
460 #size-cells = <1>; 460 #size-cells = <1>;
461 ranges; 461 ranges;
462 462
463 syscon-tcsr = <&tcsr>; 463 syscon-tcsr = <&tcsr>;
464 464
465 gsbi2_i2c: i2c@124a000 465 gsbi2_i2c: i2c@124a0000 {
466 compatible = " 466 compatible = "qcom,i2c-qup-v1.1.1";
467 reg = <0x124a0 467 reg = <0x124a0000 0x1000>;
468 pinctrl-0 = <& !! 468 pinctrl-0 = <&i2c2_pins>;
469 pinctrl-1 = <& !! 469 pinctrl-1 = <&i2c2_pins_sleep>;
470 pinctrl-names 470 pinctrl-names = "default", "sleep";
471 interrupts = < 471 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
472 clocks = <&gcc 472 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
473 clock-names = 473 clock-names = "core", "iface";
474 #address-cells 474 #address-cells = <1>;
475 #size-cells = 475 #size-cells = <0>;
476 status = "disa 476 status = "disabled";
477 }; 477 };
478 }; 478 };
479 479
480 gsbi3: gsbi@16200000 { 480 gsbi3: gsbi@16200000 {
481 status = "disabled"; 481 status = "disabled";
482 compatible = "qcom,gsb 482 compatible = "qcom,gsbi-v1.0.0";
483 cell-index = <3>; 483 cell-index = <3>;
484 reg = <0x16200000 0x10 484 reg = <0x16200000 0x100>;
485 clocks = <&gcc GSBI3_H 485 clocks = <&gcc GSBI3_H_CLK>;
486 clock-names = "iface"; 486 clock-names = "iface";
487 #address-cells = <1>; 487 #address-cells = <1>;
488 #size-cells = <1>; 488 #size-cells = <1>;
489 ranges; 489 ranges;
490 gsbi3_i2c: i2c@1628000 490 gsbi3_i2c: i2c@16280000 {
491 compatible = " 491 compatible = "qcom,i2c-qup-v1.1.1";
492 pinctrl-0 = <& !! 492 pinctrl-0 = <&i2c3_pins>;
493 pinctrl-1 = <& !! 493 pinctrl-1 = <&i2c3_pins_sleep>;
494 pinctrl-names 494 pinctrl-names = "default", "sleep";
495 reg = <0x16280 495 reg = <0x16280000 0x1000>;
496 interrupts = < 496 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
497 clocks = <&gcc 497 clocks = <&gcc GSBI3_QUP_CLK>,
498 <&gcc 498 <&gcc GSBI3_H_CLK>;
499 clock-names = 499 clock-names = "core", "iface";
500 #address-cells 500 #address-cells = <1>;
501 #size-cells = 501 #size-cells = <0>;
502 status = "disa 502 status = "disabled";
503 }; 503 };
504 }; 504 };
505 505
506 gsbi4: gsbi@16300000 { 506 gsbi4: gsbi@16300000 {
507 status = "disabled"; 507 status = "disabled";
508 compatible = "qcom,gsb 508 compatible = "qcom,gsbi-v1.0.0";
509 cell-index = <4>; 509 cell-index = <4>;
510 reg = <0x16300000 0x03 510 reg = <0x16300000 0x03>;
511 clocks = <&gcc GSBI4_H 511 clocks = <&gcc GSBI4_H_CLK>;
512 clock-names = "iface"; 512 clock-names = "iface";
513 #address-cells = <1>; 513 #address-cells = <1>;
514 #size-cells = <1>; 514 #size-cells = <1>;
515 ranges; 515 ranges;
516 516
517 gsbi4_serial: serial@1 517 gsbi4_serial: serial@16340000 {
518 compatible = " 518 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
519 reg = <0x16340 519 reg = <0x16340000 0x100>,
520 <0x16300 520 <0x16300000 0x3>;
521 interrupts = < 521 interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
522 pinctrl-0 = <& 522 pinctrl-0 = <&gsbi4_uart_pin_a>;
523 pinctrl-names 523 pinctrl-names = "default";
524 clocks = <&gcc 524 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
525 clock-names = 525 clock-names = "core", "iface";
526 status = "disa 526 status = "disabled";
527 }; 527 };
528 528
529 gsbi4_i2c: i2c@1638000 529 gsbi4_i2c: i2c@16380000 {
530 compatible = " 530 compatible = "qcom,i2c-qup-v1.1.1";
531 pinctrl-0 = <& !! 531 pinctrl-0 = <&i2c4_pins>;
532 pinctrl-1 = <& !! 532 pinctrl-1 = <&i2c4_pins_sleep>;
533 pinctrl-names 533 pinctrl-names = "default", "sleep";
534 reg = <0x16380 534 reg = <0x16380000 0x1000>;
535 interrupts = < 535 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
536 clocks = <&gcc 536 clocks = <&gcc GSBI4_QUP_CLK>,
537 <&gcc 537 <&gcc GSBI4_H_CLK>;
538 clock-names = 538 clock-names = "core", "iface";
539 status = "disa 539 status = "disabled";
540 }; 540 };
541 }; 541 };
542 542
543 gsbi5: gsbi@1a200000 { 543 gsbi5: gsbi@1a200000 {
544 status = "disabled"; 544 status = "disabled";
545 compatible = "qcom,gsb 545 compatible = "qcom,gsbi-v1.0.0";
546 cell-index = <5>; 546 cell-index = <5>;
547 reg = <0x1a200000 0x03 547 reg = <0x1a200000 0x03>;
548 clocks = <&gcc GSBI5_H 548 clocks = <&gcc GSBI5_H_CLK>;
549 clock-names = "iface"; 549 clock-names = "iface";
550 #address-cells = <1>; 550 #address-cells = <1>;
551 #size-cells = <1>; 551 #size-cells = <1>;
552 ranges; 552 ranges;
553 553
554 gsbi5_serial: serial@1 554 gsbi5_serial: serial@1a240000 {
555 compatible = " 555 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
556 reg = <0x1a240 556 reg = <0x1a240000 0x100>,
557 <0x1a200 557 <0x1a200000 0x03>;
558 interrupts = < 558 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
559 clocks = <&gcc 559 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
560 clock-names = 560 clock-names = "core", "iface";
561 status = "disa 561 status = "disabled";
562 }; 562 };
563 563
564 gsbi5_spi: spi@1a28000 564 gsbi5_spi: spi@1a280000 {
565 compatible = " 565 compatible = "qcom,spi-qup-v1.1.1";
566 reg = <0x1a280 566 reg = <0x1a280000 0x1000>;
567 interrupts = < 567 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
568 pinctrl-0 = <& !! 568 pinctrl-0 = <&spi5_default>;
569 pinctrl-1 = <& !! 569 pinctrl-1 = <&spi5_sleep>;
570 pinctrl-names 570 pinctrl-names = "default", "sleep";
571 clocks = <&gcc 571 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
572 clock-names = 572 clock-names = "core", "iface";
573 status = "disa 573 status = "disabled";
574 #address-cells 574 #address-cells = <1>;
575 #size-cells = 575 #size-cells = <0>;
576 }; 576 };
577 }; 577 };
578 578
579 gsbi6: gsbi@16500000 { 579 gsbi6: gsbi@16500000 {
580 status = "disabled"; 580 status = "disabled";
581 compatible = "qcom,gsb 581 compatible = "qcom,gsbi-v1.0.0";
582 cell-index = <6>; 582 cell-index = <6>;
583 reg = <0x16500000 0x03 583 reg = <0x16500000 0x03>;
584 clocks = <&gcc GSBI6_H 584 clocks = <&gcc GSBI6_H_CLK>;
585 clock-names = "iface"; 585 clock-names = "iface";
586 #address-cells = <1>; 586 #address-cells = <1>;
587 #size-cells = <1>; 587 #size-cells = <1>;
588 ranges; 588 ranges;
589 589
590 gsbi6_serial: serial@1 590 gsbi6_serial: serial@16540000 {
591 compatible = " 591 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
592 reg = <0x16540 592 reg = <0x16540000 0x100>,
593 <0x16500 593 <0x16500000 0x03>;
594 interrupts = < 594 interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&gcc 595 clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
596 clock-names = 596 clock-names = "core", "iface";
597 status = "disa 597 status = "disabled";
598 }; 598 };
599 599
600 gsbi6_i2c: i2c@1658000 600 gsbi6_i2c: i2c@16580000 {
601 compatible = " 601 compatible = "qcom,i2c-qup-v1.1.1";
602 pinctrl-0 = <& !! 602 pinctrl-0 = <&i2c6_pins>;
603 pinctrl-1 = <& !! 603 pinctrl-1 = <&i2c6_pins_sleep>;
604 pinctrl-names 604 pinctrl-names = "default", "sleep";
605 reg = <0x16580 605 reg = <0x16580000 0x1000>;
606 interrupts = < 606 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
607 clocks = <&gcc 607 clocks = <&gcc GSBI6_QUP_CLK>,
608 <&gcc 608 <&gcc GSBI6_H_CLK>;
609 clock-names = 609 clock-names = "core", "iface";
610 status = "disa 610 status = "disabled";
611 }; 611 };
612 }; 612 };
613 613
614 gsbi7: gsbi@16600000 { 614 gsbi7: gsbi@16600000 {
615 status = "disabled"; 615 status = "disabled";
616 compatible = "qcom,gsb 616 compatible = "qcom,gsbi-v1.0.0";
617 cell-index = <7>; 617 cell-index = <7>;
618 reg = <0x16600000 0x10 618 reg = <0x16600000 0x100>;
619 clocks = <&gcc GSBI7_H 619 clocks = <&gcc GSBI7_H_CLK>;
620 clock-names = "iface"; 620 clock-names = "iface";
621 #address-cells = <1>; 621 #address-cells = <1>;
622 #size-cells = <1>; 622 #size-cells = <1>;
623 ranges; 623 ranges;
624 syscon-tcsr = <&tcsr>; 624 syscon-tcsr = <&tcsr>;
625 625
626 gsbi7_serial: serial@1 626 gsbi7_serial: serial@16640000 {
627 compatible = " 627 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
628 reg = <0x16640 628 reg = <0x16640000 0x1000>,
629 <0x16600 629 <0x16600000 0x1000>;
630 interrupts = < 630 interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
631 clocks = <&gcc 631 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
632 clock-names = 632 clock-names = "core", "iface";
633 status = "disa 633 status = "disabled";
634 }; 634 };
635 635
636 gsbi7_i2c: i2c@1668000 636 gsbi7_i2c: i2c@16680000 {
637 compatible = " 637 compatible = "qcom,i2c-qup-v1.1.1";
638 pinctrl-0 = <& !! 638 pinctrl-0 = <&i2c7_pins>;
639 pinctrl-1 = <& !! 639 pinctrl-1 = <&i2c7_pins_sleep>;
640 pinctrl-names 640 pinctrl-names = "default", "sleep";
641 reg = <0x16680 641 reg = <0x16680000 0x1000>;
642 interrupts = < 642 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
643 clocks = <&gcc 643 clocks = <&gcc GSBI7_QUP_CLK>,
644 <&gcc 644 <&gcc GSBI7_H_CLK>;
645 clock-names = 645 clock-names = "core", "iface";
646 status = "disa 646 status = "disabled";
647 }; 647 };
648 }; 648 };
649 649
650 rng@1a500000 { 650 rng@1a500000 {
651 compatible = "qcom,prn 651 compatible = "qcom,prng";
652 reg = <0x1a500000 0x20 652 reg = <0x1a500000 0x200>;
653 clocks = <&gcc PRNG_CL 653 clocks = <&gcc PRNG_CLK>;
654 clock-names = "core"; 654 clock-names = "core";
655 }; 655 };
656 656
657 ssbi2: ssbi@c00000 { 657 ssbi2: ssbi@c00000 {
658 compatible = "qcom,ssb 658 compatible = "qcom,ssbi";
659 reg = <0x00c00000 0x10 659 reg = <0x00c00000 0x1000>;
660 qcom,controller-type = 660 qcom,controller-type = "pmic-arbiter";
661 }; 661 };
662 662
663 ssbi: ssbi@500000 { 663 ssbi: ssbi@500000 {
664 compatible = "qcom,ssb 664 compatible = "qcom,ssbi";
665 reg = <0x00500000 0x10 665 reg = <0x00500000 0x1000>;
666 qcom,controller-type = 666 qcom,controller-type = "pmic-arbiter";
667 }; 667 };
668 668
669 qfprom: efuse@700000 { !! 669 qfprom: qfprom@700000 {
670 compatible = "qcom,apq 670 compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
671 reg = <0x00700000 0x10 671 reg = <0x00700000 0x1000>;
672 #address-cells = <1>; 672 #address-cells = <1>;
673 #size-cells = <1>; 673 #size-cells = <1>;
674 !! 674 ranges;
675 tsens_calib: calib@404 675 tsens_calib: calib@404 {
676 reg = <0x404 0 676 reg = <0x404 0x10>;
677 }; 677 };
678 tsens_backup: backup_c 678 tsens_backup: backup_calib@414 {
679 reg = <0x414 0 679 reg = <0x414 0x10>;
680 }; 680 };
681 }; 681 };
682 682
683 gcc: clock-controller@900000 { 683 gcc: clock-controller@900000 {
684 compatible = "qcom,gcc 684 compatible = "qcom,gcc-apq8064", "syscon";
685 reg = <0x00900000 0x40 685 reg = <0x00900000 0x4000>;
686 #clock-cells = <1>; 686 #clock-cells = <1>;
>> 687 #power-domain-cells = <1>;
687 #reset-cells = <1>; 688 #reset-cells = <1>;
688 clocks = <&cxo_board>, 689 clocks = <&cxo_board>,
689 <&pxo_board>, 690 <&pxo_board>,
690 <&lcc PLL4>; 691 <&lcc PLL4>;
691 clock-names = "cxo", " 692 clock-names = "cxo", "pxo", "pll4";
692 693
693 tsens: thermal-sensor 694 tsens: thermal-sensor {
694 compatible = " 695 compatible = "qcom,msm8960-tsens";
695 696
696 nvmem-cells = 697 nvmem-cells = <&tsens_calib>, <&tsens_backup>;
697 nvmem-cell-nam 698 nvmem-cell-names = "calib", "calib_backup";
698 interrupts = < 699 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
699 interrupt-name 700 interrupt-names = "uplow";
700 701
701 #qcom,sensors 702 #qcom,sensors = <11>;
702 #thermal-senso 703 #thermal-sensor-cells = <1>;
703 }; 704 };
704 }; 705 };
705 706
706 lcc: clock-controller@28000000 707 lcc: clock-controller@28000000 {
707 compatible = "qcom,lcc 708 compatible = "qcom,lcc-apq8064";
708 reg = <0x28000000 0x10 709 reg = <0x28000000 0x1000>;
709 #clock-cells = <1>; 710 #clock-cells = <1>;
710 #reset-cells = <1>; 711 #reset-cells = <1>;
711 clocks = <&pxo_board>, 712 clocks = <&pxo_board>,
712 <&gcc PLL4_VO 713 <&gcc PLL4_VOTE>,
713 <0>, 714 <0>,
714 <0>, <0>, 715 <0>, <0>,
715 <0>, <0>, 716 <0>, <0>,
716 <0>; 717 <0>;
717 clock-names = "pxo", 718 clock-names = "pxo",
718 "pll4_vo 719 "pll4_vote",
719 "mi2s_co 720 "mi2s_codec_clk",
720 "codec_i 721 "codec_i2s_mic_codec_clk",
721 "spare_i 722 "spare_i2s_mic_codec_clk",
722 "codec_i 723 "codec_i2s_spkr_codec_clk",
723 "spare_i 724 "spare_i2s_spkr_codec_clk",
724 "pcm_cod 725 "pcm_codec_clk";
725 }; 726 };
726 727
727 mmcc: clock-controller@4000000 728 mmcc: clock-controller@4000000 {
728 compatible = "qcom,mmc 729 compatible = "qcom,mmcc-apq8064";
729 reg = <0x4000000 0x100 730 reg = <0x4000000 0x1000>;
730 #clock-cells = <1>; 731 #clock-cells = <1>;
731 #power-domain-cells = 732 #power-domain-cells = <1>;
732 #reset-cells = <1>; 733 #reset-cells = <1>;
733 clocks = <&pxo_board>, 734 clocks = <&pxo_board>,
734 <&gcc PLL3>, 735 <&gcc PLL3>,
735 <&gcc PLL8_VO 736 <&gcc PLL8_VOTE>,
736 <&dsi0_phy 1> 737 <&dsi0_phy 1>,
737 <&dsi0_phy 0> 738 <&dsi0_phy 0>,
738 <&dsi1_phy 1> 739 <&dsi1_phy 1>,
739 <&dsi1_phy 0> 740 <&dsi1_phy 0>,
740 <&hdmi_phy>; 741 <&hdmi_phy>;
741 clock-names = "pxo", 742 clock-names = "pxo",
742 "pll3", 743 "pll3",
743 "pll8_vo 744 "pll8_vote",
744 "dsi1pll 745 "dsi1pll",
745 "dsi1pll 746 "dsi1pllbyte",
746 "dsi2pll 747 "dsi2pll",
747 "dsi2pll 748 "dsi2pllbyte",
748 "hdmipll 749 "hdmipll";
749 }; 750 };
750 751
751 l2cc: clock-controller@2011000 752 l2cc: clock-controller@2011000 {
752 compatible = "qcom,kps 753 compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
753 reg = <0x2011000 0x100 754 reg = <0x2011000 0x1000>;
754 clocks = <&gcc PLL8_VO 755 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
755 clock-names = "pll8_vo 756 clock-names = "pll8_vote", "pxo";
756 #clock-cells = <0>; 757 #clock-cells = <0>;
757 }; 758 };
758 759
759 rpm: rpm@108000 { 760 rpm: rpm@108000 {
760 compatible = "qcom,rpm 761 compatible = "qcom,rpm-apq8064";
761 reg = <0x108000 0x1000 762 reg = <0x108000 0x1000>;
762 qcom,ipc = <&l2cc 0x8 763 qcom,ipc = <&l2cc 0x8 2>;
763 764
764 interrupts = <GIC_SPI 765 interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
765 <GIC_SPI 766 <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
766 <GIC_SPI 767 <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
767 interrupt-names = "ack 768 interrupt-names = "ack", "err", "wakeup";
768 769
769 rpmcc: clock-controlle 770 rpmcc: clock-controller {
770 compatible = " 771 compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
771 #clock-cells = 772 #clock-cells = <1>;
772 clocks = <&pxo 773 clocks = <&pxo_board>, <&cxo_board>;
773 clock-names = 774 clock-names = "pxo", "cxo";
774 }; 775 };
775 }; 776 };
776 777
777 usb1: usb@12500000 { 778 usb1: usb@12500000 {
778 compatible = "qcom,ci- 779 compatible = "qcom,ci-hdrc";
779 reg = <0x12500000 0x20 780 reg = <0x12500000 0x200>,
780 <0x12500200 0x20 781 <0x12500200 0x200>;
781 interrupts = <GIC_SPI 782 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
782 clocks = <&gcc USB_HS1 783 clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
783 clock-names = "core", 784 clock-names = "core", "iface";
784 assigned-clocks = <&gc 785 assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
785 assigned-clock-rates = 786 assigned-clock-rates = <60000000>;
786 resets = <&gcc USB_HS1 787 resets = <&gcc USB_HS1_RESET>;
787 reset-names = "core"; 788 reset-names = "core";
788 phy_type = "ulpi"; 789 phy_type = "ulpi";
789 ahb-burst-config = <0> 790 ahb-burst-config = <0>;
790 phys = <&usb_hs1_phy>; 791 phys = <&usb_hs1_phy>;
791 phy-names = "usb-phy"; 792 phy-names = "usb-phy";
792 status = "disabled"; 793 status = "disabled";
793 #reset-cells = <1>; 794 #reset-cells = <1>;
794 795
795 ulpi { 796 ulpi {
796 usb_hs1_phy: p 797 usb_hs1_phy: phy {
797 compat 798 compatible = "qcom,usb-hs-phy-apq8064",
798 799 "qcom,usb-hs-phy";
799 clocks 800 clocks = <&sleep_clk>, <&cxo_board>;
800 clock- 801 clock-names = "sleep", "ref";
801 resets 802 resets = <&usb1 0>;
802 reset- 803 reset-names = "por";
803 #phy-c 804 #phy-cells = <0>;
804 }; 805 };
805 }; 806 };
806 }; 807 };
807 808
808 usb3: usb@12520000 { 809 usb3: usb@12520000 {
809 compatible = "qcom,ci- 810 compatible = "qcom,ci-hdrc";
810 reg = <0x12520000 0x20 811 reg = <0x12520000 0x200>,
811 <0x12520200 0x20 812 <0x12520200 0x200>;
812 interrupts = <GIC_SPI 813 interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
813 clocks = <&gcc USB_HS3 814 clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
814 clock-names = "core", 815 clock-names = "core", "iface";
815 assigned-clocks = <&gc 816 assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
816 assigned-clock-rates = 817 assigned-clock-rates = <60000000>;
817 resets = <&gcc USB_HS3 818 resets = <&gcc USB_HS3_RESET>;
818 reset-names = "core"; 819 reset-names = "core";
819 phy_type = "ulpi"; 820 phy_type = "ulpi";
820 ahb-burst-config = <0> 821 ahb-burst-config = <0>;
821 phys = <&usb_hs3_phy>; 822 phys = <&usb_hs3_phy>;
822 phy-names = "usb-phy"; 823 phy-names = "usb-phy";
823 status = "disabled"; 824 status = "disabled";
824 #reset-cells = <1>; 825 #reset-cells = <1>;
825 826
826 ulpi { 827 ulpi {
827 usb_hs3_phy: p 828 usb_hs3_phy: phy {
828 compat 829 compatible = "qcom,usb-hs-phy-apq8064",
829 830 "qcom,usb-hs-phy";
830 #phy-c 831 #phy-cells = <0>;
831 clocks 832 clocks = <&sleep_clk>, <&cxo_board>;
832 clock- 833 clock-names = "sleep", "ref";
833 resets 834 resets = <&usb3 0>;
834 reset- 835 reset-names = "por";
835 }; 836 };
836 }; 837 };
837 }; 838 };
838 839
839 usb4: usb@12530000 { 840 usb4: usb@12530000 {
840 compatible = "qcom,ci- 841 compatible = "qcom,ci-hdrc";
841 reg = <0x12530000 0x20 842 reg = <0x12530000 0x200>,
842 <0x12530200 0x20 843 <0x12530200 0x200>;
843 interrupts = <GIC_SPI 844 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
844 clocks = <&gcc USB_HS4 845 clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
845 clock-names = "core", 846 clock-names = "core", "iface";
846 assigned-clocks = <&gc 847 assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
847 assigned-clock-rates = 848 assigned-clock-rates = <60000000>;
848 resets = <&gcc USB_HS4 849 resets = <&gcc USB_HS4_RESET>;
849 reset-names = "core"; 850 reset-names = "core";
850 phy_type = "ulpi"; 851 phy_type = "ulpi";
851 ahb-burst-config = <0> 852 ahb-burst-config = <0>;
852 phys = <&usb_hs4_phy>; 853 phys = <&usb_hs4_phy>;
853 phy-names = "usb-phy"; 854 phy-names = "usb-phy";
854 status = "disabled"; 855 status = "disabled";
855 #reset-cells = <1>; 856 #reset-cells = <1>;
856 857
857 ulpi { 858 ulpi {
858 usb_hs4_phy: p 859 usb_hs4_phy: phy {
859 compat 860 compatible = "qcom,usb-hs-phy-apq8064",
860 861 "qcom,usb-hs-phy";
861 #phy-c 862 #phy-cells = <0>;
862 clocks 863 clocks = <&sleep_clk>, <&cxo_board>;
863 clock- 864 clock-names = "sleep", "ref";
864 resets 865 resets = <&usb4 0>;
865 reset- 866 reset-names = "por";
866 }; 867 };
867 }; 868 };
868 }; 869 };
869 870
870 sata_phy0: phy@1b400000 { 871 sata_phy0: phy@1b400000 {
871 compatible = "qcom,apq 872 compatible = "qcom,apq8064-sata-phy";
872 status = "disabled"; 873 status = "disabled";
873 reg = <0x1b400000 0x20 874 reg = <0x1b400000 0x200>;
>> 875 reg-names = "phy_mem";
874 clocks = <&gcc SATA_PH 876 clocks = <&gcc SATA_PHY_CFG_CLK>;
875 clock-names = "cfg"; 877 clock-names = "cfg";
876 #phy-cells = <0>; 878 #phy-cells = <0>;
877 }; 879 };
878 880
879 sata0: sata@29000000 { 881 sata0: sata@29000000 {
880 compatible = "qcom,apq 882 compatible = "qcom,apq8064-ahci", "generic-ahci";
881 status = "disabled"; 883 status = "disabled";
882 reg = <0x29000000 884 reg = <0x29000000 0x180>;
883 interrupts = <GIC_SPI 885 interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
884 886
885 clocks = <&gcc SFAB_SA 887 clocks = <&gcc SFAB_SATA_S_H_CLK>,
886 <&gcc SATA_H_ 888 <&gcc SATA_H_CLK>,
887 <&gcc SATA_A_ 889 <&gcc SATA_A_CLK>,
888 <&gcc SATA_RX 890 <&gcc SATA_RXOOB_CLK>,
889 <&gcc SATA_PM 891 <&gcc SATA_PMALIVE_CLK>;
890 clock-names = "slave_i 892 clock-names = "slave_iface",
891 "iface", 893 "iface",
892 "core", !! 894 "bus",
893 "rxoob", 895 "rxoob",
894 "pmalive !! 896 "core_pmalive";
895 897
896 assigned-clocks = <&gc 898 assigned-clocks = <&gcc SATA_RXOOB_CLK>,
897 <&gc 899 <&gcc SATA_PMALIVE_CLK>;
898 assigned-clock-rates = 900 assigned-clock-rates = <100000000>, <100000000>;
899 901
900 phys = <&sata_phy0>; 902 phys = <&sata_phy0>;
901 phy-names = "sata-phy" 903 phy-names = "sata-phy";
902 ports-implemented = <0 904 ports-implemented = <0x1>;
903 }; 905 };
904 906
905 sdcc3: mmc@12180000 { 907 sdcc3: mmc@12180000 {
906 compatible = "arm,pl18 908 compatible = "arm,pl18x", "arm,primecell";
907 arm,primecell-periphid 909 arm,primecell-periphid = <0x00051180>;
908 status = "disabled"; 910 status = "disabled";
909 reg = <0x12180000 0x20 911 reg = <0x12180000 0x2000>;
910 interrupts = <GIC_SPI 912 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
911 clocks = <&gcc SDC3_CL 913 clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
912 clock-names = "mclk", 914 clock-names = "mclk", "apb_pclk";
913 bus-width = <4>; 915 bus-width = <4>;
914 cap-sd-highspeed; 916 cap-sd-highspeed;
915 cap-mmc-highspeed; 917 cap-mmc-highspeed;
916 max-frequency = <19200 918 max-frequency = <192000000>;
917 no-1-8-v; 919 no-1-8-v;
918 dmas = <&sdcc3bam 2>, 920 dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
919 dma-names = "tx", "rx" 921 dma-names = "tx", "rx";
920 }; 922 };
921 923
922 sdcc3bam: dma-controller@12182 924 sdcc3bam: dma-controller@12182000 {
923 compatible = "qcom,bam 925 compatible = "qcom,bam-v1.3.0";
924 reg = <0x12182000 0x80 926 reg = <0x12182000 0x8000>;
925 interrupts = <GIC_SPI 927 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
926 clocks = <&gcc SDC3_H_ 928 clocks = <&gcc SDC3_H_CLK>;
927 clock-names = "bam_clk 929 clock-names = "bam_clk";
928 #dma-cells = <1>; 930 #dma-cells = <1>;
929 qcom,ee = <0>; 931 qcom,ee = <0>;
930 }; 932 };
931 933
932 sdcc4: mmc@121c0000 { 934 sdcc4: mmc@121c0000 {
933 compatible = "arm,pl18 935 compatible = "arm,pl18x", "arm,primecell";
934 arm,primecell-periphid 936 arm,primecell-periphid = <0x00051180>;
935 status = "disabled"; 937 status = "disabled";
936 reg = <0x121c0000 0x20 938 reg = <0x121c0000 0x2000>;
937 interrupts = <GIC_SPI 939 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
938 clocks = <&gcc SDC4_CL 940 clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
939 clock-names = "mclk", 941 clock-names = "mclk", "apb_pclk";
940 bus-width = <4>; 942 bus-width = <4>;
941 cap-sd-highspeed; 943 cap-sd-highspeed;
942 cap-mmc-highspeed; 944 cap-mmc-highspeed;
943 max-frequency = <48000 945 max-frequency = <48000000>;
944 dmas = <&sdcc4bam 2>, 946 dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
945 dma-names = "tx", "rx" 947 dma-names = "tx", "rx";
946 pinctrl-names = "defau 948 pinctrl-names = "default";
947 pinctrl-0 = <&sdc4_def !! 949 pinctrl-0 = <&sdc4_gpios>;
948 }; 950 };
949 951
950 sdcc4bam: dma-controller@121c2 952 sdcc4bam: dma-controller@121c2000 {
951 compatible = "qcom,bam 953 compatible = "qcom,bam-v1.3.0";
952 reg = <0x121c2000 0x80 954 reg = <0x121c2000 0x8000>;
953 interrupts = <GIC_SPI 955 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
954 clocks = <&gcc SDC4_H_ 956 clocks = <&gcc SDC4_H_CLK>;
955 clock-names = "bam_clk 957 clock-names = "bam_clk";
956 #dma-cells = <1>; 958 #dma-cells = <1>;
957 qcom,ee = <0>; 959 qcom,ee = <0>;
958 }; 960 };
959 961
960 sdcc1: mmc@12400000 { 962 sdcc1: mmc@12400000 {
961 status = "disabled"; 963 status = "disabled";
962 compatible = "arm,pl18 964 compatible = "arm,pl18x", "arm,primecell";
963 pinctrl-names = "defau 965 pinctrl-names = "default";
964 pinctrl-0 = <&sdcc1_de !! 966 pinctrl-0 = <&sdcc1_pins>;
965 arm,primecell-periphid 967 arm,primecell-periphid = <0x00051180>;
966 reg = <0x12400000 0x20 968 reg = <0x12400000 0x2000>;
967 interrupts = <GIC_SPI 969 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
968 clocks = <&gcc SDC1_CL 970 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
969 clock-names = "mclk", 971 clock-names = "mclk", "apb_pclk";
970 bus-width = <8>; 972 bus-width = <8>;
971 max-frequency = <96000 973 max-frequency = <96000000>;
972 non-removable; 974 non-removable;
973 cap-sd-highspeed; 975 cap-sd-highspeed;
974 cap-mmc-highspeed; 976 cap-mmc-highspeed;
975 dmas = <&sdcc1bam 2>, 977 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
976 dma-names = "tx", "rx" 978 dma-names = "tx", "rx";
977 }; 979 };
978 980
979 sdcc1bam: dma-controller@12402 981 sdcc1bam: dma-controller@12402000 {
980 compatible = "qcom,bam 982 compatible = "qcom,bam-v1.3.0";
981 reg = <0x12402000 0x80 983 reg = <0x12402000 0x8000>;
982 interrupts = <GIC_SPI 984 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
983 clocks = <&gcc SDC1_H_ 985 clocks = <&gcc SDC1_H_CLK>;
984 clock-names = "bam_clk 986 clock-names = "bam_clk";
985 #dma-cells = <1>; 987 #dma-cells = <1>;
986 qcom,ee = <0>; 988 qcom,ee = <0>;
987 }; 989 };
988 990
989 tcsr: syscon@1a400000 { 991 tcsr: syscon@1a400000 {
990 compatible = "qcom,tcs 992 compatible = "qcom,tcsr-apq8064", "syscon";
991 reg = <0x1a400000 0x10 993 reg = <0x1a400000 0x100>;
992 }; 994 };
993 995
994 gpu: gpu@4300000 { !! 996 gpu: adreno-3xx@4300000 {
995 compatible = "qcom,adr 997 compatible = "qcom,adreno-320.2", "qcom,adreno";
996 reg = <0x04300000 0x20 998 reg = <0x04300000 0x20000>;
997 reg-names = "kgsl_3d0_ 999 reg-names = "kgsl_3d0_reg_memory";
998 interrupts = <GIC_SPI 1000 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
999 interrupt-names = "kgs 1001 interrupt-names = "kgsl_3d0_irq";
1000 clock-names = 1002 clock-names =
1001 "core", 1003 "core",
1002 "iface", 1004 "iface",
1003 "mem", 1005 "mem",
1004 "mem_iface"; 1006 "mem_iface";
1005 clocks = 1007 clocks =
1006 <&mmcc GFX3D_CLK> 1008 <&mmcc GFX3D_CLK>,
1007 <&mmcc GFX3D_AHB_ 1009 <&mmcc GFX3D_AHB_CLK>,
1008 <&mmcc GFX3D_AXI_ 1010 <&mmcc GFX3D_AXI_CLK>,
1009 <&mmcc MMSS_IMEM_ 1011 <&mmcc MMSS_IMEM_AHB_CLK>;
1010 1012
1011 iommus = <&gfx3d 0 1013 iommus = <&gfx3d 0
1012 &gfx3d 1 1014 &gfx3d 1
1013 &gfx3d 2 1015 &gfx3d 2
1014 &gfx3d 3 1016 &gfx3d 3
1015 &gfx3d 4 1017 &gfx3d 4
1016 &gfx3d 5 1018 &gfx3d 5
1017 &gfx3d 6 1019 &gfx3d 6
1018 &gfx3d 7 1020 &gfx3d 7
1019 &gfx3d 8 1021 &gfx3d 8
1020 &gfx3d 9 1022 &gfx3d 9
1021 &gfx3d 10 1023 &gfx3d 10
1022 &gfx3d 11 1024 &gfx3d 11
1023 &gfx3d 12 1025 &gfx3d 12
1024 &gfx3d 13 1026 &gfx3d 13
1025 &gfx3d 14 1027 &gfx3d 14
1026 &gfx3d 15 1028 &gfx3d 15
1027 &gfx3d 16 1029 &gfx3d 16
1028 &gfx3d 17 1030 &gfx3d 17
1029 &gfx3d 18 1031 &gfx3d 18
1030 &gfx3d 19 1032 &gfx3d 19
1031 &gfx3d 20 1033 &gfx3d 20
1032 &gfx3d 21 1034 &gfx3d 21
1033 &gfx3d 22 1035 &gfx3d 22
1034 &gfx3d 23 1036 &gfx3d 23
1035 &gfx3d 24 1037 &gfx3d 24
1036 &gfx3d 25 1038 &gfx3d 25
1037 &gfx3d 26 1039 &gfx3d 26
1038 &gfx3d 27 1040 &gfx3d 27
1039 &gfx3d 28 1041 &gfx3d 28
1040 &gfx3d 29 1042 &gfx3d 29
1041 &gfx3d 30 1043 &gfx3d 30
1042 &gfx3d 31 1044 &gfx3d 31
1043 &gfx3d1 0 1045 &gfx3d1 0
1044 &gfx3d1 1 1046 &gfx3d1 1
1045 &gfx3d1 2 1047 &gfx3d1 2
1046 &gfx3d1 3 1048 &gfx3d1 3
1047 &gfx3d1 4 1049 &gfx3d1 4
1048 &gfx3d1 5 1050 &gfx3d1 5
1049 &gfx3d1 6 1051 &gfx3d1 6
1050 &gfx3d1 7 1052 &gfx3d1 7
1051 &gfx3d1 8 1053 &gfx3d1 8
1052 &gfx3d1 9 1054 &gfx3d1 9
1053 &gfx3d1 10 1055 &gfx3d1 10
1054 &gfx3d1 11 1056 &gfx3d1 11
1055 &gfx3d1 12 1057 &gfx3d1 12
1056 &gfx3d1 13 1058 &gfx3d1 13
1057 &gfx3d1 14 1059 &gfx3d1 14
1058 &gfx3d1 15 1060 &gfx3d1 15
1059 &gfx3d1 16 1061 &gfx3d1 16
1060 &gfx3d1 17 1062 &gfx3d1 17
1061 &gfx3d1 18 1063 &gfx3d1 18
1062 &gfx3d1 19 1064 &gfx3d1 19
1063 &gfx3d1 20 1065 &gfx3d1 20
1064 &gfx3d1 21 1066 &gfx3d1 21
1065 &gfx3d1 22 1067 &gfx3d1 22
1066 &gfx3d1 23 1068 &gfx3d1 23
1067 &gfx3d1 24 1069 &gfx3d1 24
1068 &gfx3d1 25 1070 &gfx3d1 25
1069 &gfx3d1 26 1071 &gfx3d1 26
1070 &gfx3d1 27 1072 &gfx3d1 27
1071 &gfx3d1 28 1073 &gfx3d1 28
1072 &gfx3d1 29 1074 &gfx3d1 29
1073 &gfx3d1 30 1075 &gfx3d1 30
1074 &gfx3d1 31> 1076 &gfx3d1 31>;
1075 1077
1076 operating-points-v2 = 1078 operating-points-v2 = <&gpu_opp_table>;
1077 1079
1078 gpu_opp_table: opp-ta 1080 gpu_opp_table: opp-table {
1079 compatible = 1081 compatible = "operating-points-v2";
1080 1082
1081 opp-450000000 1083 opp-450000000 {
1082 opp-h 1084 opp-hz = /bits/ 64 <450000000>;
1083 }; 1085 };
1084 1086
1085 opp-27000000 1087 opp-27000000 {
1086 opp-h 1088 opp-hz = /bits/ 64 <27000000>;
1087 }; 1089 };
1088 }; 1090 };
1089 }; 1091 };
1090 1092
1091 mmss_sfpb: syscon@5700000 { 1093 mmss_sfpb: syscon@5700000 {
1092 compatible = "syscon" 1094 compatible = "syscon";
1093 reg = <0x5700000 0x70 1095 reg = <0x5700000 0x70>;
1094 }; 1096 };
1095 1097
1096 dsi0: dsi@4700000 { 1098 dsi0: dsi@4700000 {
1097 compatible = "qcom,ap 1099 compatible = "qcom,apq8064-dsi-ctrl",
1098 "qcom,md 1100 "qcom,mdss-dsi-ctrl";
1099 #address-cells = <1>; 1101 #address-cells = <1>;
1100 #size-cells = <0>; 1102 #size-cells = <0>;
1101 interrupts = <GIC_SPI 1103 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
1102 reg = <0x04700000 0x2 1104 reg = <0x04700000 0x200>;
1103 reg-names = "dsi_ctrl 1105 reg-names = "dsi_ctrl";
1104 1106
1105 clocks = <&mmcc DSI_M 1107 clocks = <&mmcc DSI_M_AHB_CLK>,
1106 <&mmcc DSI_S_ 1108 <&mmcc DSI_S_AHB_CLK>,
1107 <&mmcc AMP_AH 1109 <&mmcc AMP_AHB_CLK>,
1108 <&mmcc DSI_CL 1110 <&mmcc DSI_CLK>,
1109 <&mmcc DSI1_B 1111 <&mmcc DSI1_BYTE_CLK>,
1110 <&mmcc DSI_PI 1112 <&mmcc DSI_PIXEL_CLK>,
1111 <&mmcc DSI1_E 1113 <&mmcc DSI1_ESC_CLK>;
1112 clock-names = "iface" 1114 clock-names = "iface", "bus", "core_mmss",
1113 "src" 1115 "src", "byte", "pixel",
1114 "core 1116 "core";
1115 1117
1116 assigned-clocks = <&m 1118 assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
1117 <&mmc 1119 <&mmcc DSI1_ESC_SRC>,
1118 <&mmc 1120 <&mmcc DSI_SRC>,
1119 <&mmc 1121 <&mmcc DSI_PIXEL_SRC>;
1120 assigned-clock-parent 1122 assigned-clock-parents = <&dsi0_phy 0>,
1121 1123 <&dsi0_phy 0>,
1122 1124 <&dsi0_phy 1>,
1123 1125 <&dsi0_phy 1>;
1124 syscon-sfpb = <&mmss_ 1126 syscon-sfpb = <&mmss_sfpb>;
1125 phys = <&dsi0_phy>; 1127 phys = <&dsi0_phy>;
1126 status = "disabled"; 1128 status = "disabled";
1127 1129
1128 ports { 1130 ports {
1129 #address-cell 1131 #address-cells = <1>;
1130 #size-cells = 1132 #size-cells = <0>;
1131 1133
1132 port@0 { 1134 port@0 {
1133 reg = 1135 reg = <0>;
1134 dsi0_ 1136 dsi0_in: endpoint {
1135 }; 1137 };
1136 }; 1138 };
1137 1139
1138 port@1 { 1140 port@1 {
1139 reg = 1141 reg = <1>;
1140 dsi0_ 1142 dsi0_out: endpoint {
1141 }; 1143 };
1142 }; 1144 };
1143 }; 1145 };
1144 }; 1146 };
1145 1147
1146 1148
1147 dsi0_phy: phy@4700200 { 1149 dsi0_phy: phy@4700200 {
1148 compatible = "qcom,ds 1150 compatible = "qcom,dsi-phy-28nm-8960";
1149 #clock-cells = <1>; 1151 #clock-cells = <1>;
1150 #phy-cells = <0>; 1152 #phy-cells = <0>;
1151 1153
1152 reg = <0x04700200 0x1 1154 reg = <0x04700200 0x100>,
1153 <0x04700300 0 1155 <0x04700300 0x200>,
1154 <0x04700500 0 1156 <0x04700500 0x5c>;
1155 reg-names = "dsi_pll" 1157 reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
1156 clock-names = "iface" 1158 clock-names = "iface", "ref";
1157 clocks = <&mmcc DSI_M 1159 clocks = <&mmcc DSI_M_AHB_CLK>,
1158 <&pxo_board> 1160 <&pxo_board>;
1159 status = "disabled"; 1161 status = "disabled";
1160 }; 1162 };
1161 1163
1162 dsi1: dsi@5800000 { 1164 dsi1: dsi@5800000 {
1163 compatible = "qcom,md 1165 compatible = "qcom,mdss-dsi-ctrl";
1164 interrupts = <GIC_SPI 1166 interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
1165 reg = <0x05800000 0x2 1167 reg = <0x05800000 0x200>;
1166 reg-names = "dsi_ctrl 1168 reg-names = "dsi_ctrl";
1167 1169
1168 clocks = <&mmcc DSI2_ 1170 clocks = <&mmcc DSI2_M_AHB_CLK>,
1169 <&mmcc DSI2_ 1171 <&mmcc DSI2_S_AHB_CLK>,
1170 <&mmcc AMP_A 1172 <&mmcc AMP_AHB_CLK>,
1171 <&mmcc DSI2_ 1173 <&mmcc DSI2_CLK>,
1172 <&mmcc DSI2_ 1174 <&mmcc DSI2_BYTE_CLK>,
1173 <&mmcc DSI2_ 1175 <&mmcc DSI2_PIXEL_CLK>,
1174 <&mmcc DSI2_ 1176 <&mmcc DSI2_ESC_CLK>;
1175 clock-names = "iface" 1177 clock-names = "iface",
1176 "bus", 1178 "bus",
1177 "core_m 1179 "core_mmss",
1178 "src", 1180 "src",
1179 "byte", 1181 "byte",
1180 "pixel" 1182 "pixel",
1181 "core"; 1183 "core";
1182 1184
1183 assigned-clocks = <&m 1185 assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
1184 <&m 1186 <&mmcc DSI2_ESC_SRC>,
1185 <&m 1187 <&mmcc DSI2_SRC>,
1186 <&m 1188 <&mmcc DSI2_PIXEL_SRC>;
1187 assigned-clock-parent 1189 assigned-clock-parents = <&dsi1_phy 0>,
1188 1190 <&dsi1_phy 0>,
1189 1191 <&dsi1_phy 1>,
1190 1192 <&dsi1_phy 1>;
1191 1193
1192 syscon-sfpb = <&mmss_ 1194 syscon-sfpb = <&mmss_sfpb>;
1193 phys = <&dsi1_phy>; 1195 phys = <&dsi1_phy>;
1194 1196
1195 #address-cells = <1>; 1197 #address-cells = <1>;
1196 #size-cells = <0>; 1198 #size-cells = <0>;
1197 1199
1198 status = "disabled"; 1200 status = "disabled";
1199 1201
1200 ports { 1202 ports {
1201 #address-cell 1203 #address-cells = <1>;
1202 #size-cells = 1204 #size-cells = <0>;
1203 1205
1204 port@0 { 1206 port@0 {
1205 reg = 1207 reg = <0>;
1206 dsi1_ 1208 dsi1_in: endpoint {
1207 }; 1209 };
1208 }; 1210 };
1209 1211
1210 port@1 { 1212 port@1 {
1211 reg = 1213 reg = <1>;
1212 dsi1_ 1214 dsi1_out: endpoint {
1213 }; 1215 };
1214 }; 1216 };
1215 }; 1217 };
1216 }; 1218 };
1217 1219
1218 1220
1219 dsi1_phy: dsi-phy@5800200 { 1221 dsi1_phy: dsi-phy@5800200 {
1220 compatible = "qcom,ds 1222 compatible = "qcom,dsi-phy-28nm-8960";
1221 reg = <0x05800200 0x1 1223 reg = <0x05800200 0x100>,
1222 <0x05800300 0x2 1224 <0x05800300 0x200>,
1223 <0x05800500 0x5 1225 <0x05800500 0x5c>;
1224 reg-names = "dsi_pll" 1226 reg-names = "dsi_pll",
1225 "dsi_phy" 1227 "dsi_phy",
1226 "dsi_phy_ 1228 "dsi_phy_regulator";
1227 clock-names = "iface" 1229 clock-names = "iface",
1228 "ref"; 1230 "ref";
1229 clocks = <&mmcc DSI2_ 1231 clocks = <&mmcc DSI2_M_AHB_CLK>,
1230 <&pxo_board> 1232 <&pxo_board>;
1231 #clock-cells = <1>; 1233 #clock-cells = <1>;
1232 #phy-cells = <0>; 1234 #phy-cells = <0>;
1233 1235
1234 status = "disabled"; 1236 status = "disabled";
1235 }; 1237 };
1236 1238
1237 mdp_port0: iommu@7500000 { 1239 mdp_port0: iommu@7500000 {
1238 compatible = "qcom,ap 1240 compatible = "qcom,apq8064-iommu";
1239 #iommu-cells = <1>; 1241 #iommu-cells = <1>;
1240 clock-names = 1242 clock-names =
1241 "smmu_pclk", 1243 "smmu_pclk",
1242 "iommu_clk"; 1244 "iommu_clk";
1243 clocks = 1245 clocks =
1244 <&mmcc SMMU_AHB_C 1246 <&mmcc SMMU_AHB_CLK>,
1245 <&mmcc MDP_AXI_CL 1247 <&mmcc MDP_AXI_CLK>;
1246 reg = <0x07500000 0x1 1248 reg = <0x07500000 0x100000>;
1247 interrupts = 1249 interrupts =
1248 <GIC_SPI 63 IRQ_T 1250 <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
1249 <GIC_SPI 64 IRQ_T 1251 <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
1250 qcom,ncb = <2>; 1252 qcom,ncb = <2>;
1251 }; 1253 };
1252 1254
1253 mdp_port1: iommu@7600000 { 1255 mdp_port1: iommu@7600000 {
1254 compatible = "qcom,ap 1256 compatible = "qcom,apq8064-iommu";
1255 #iommu-cells = <1>; 1257 #iommu-cells = <1>;
1256 clock-names = 1258 clock-names =
1257 "smmu_pclk", 1259 "smmu_pclk",
1258 "iommu_clk"; 1260 "iommu_clk";
1259 clocks = 1261 clocks =
1260 <&mmcc SMMU_AHB_C 1262 <&mmcc SMMU_AHB_CLK>,
1261 <&mmcc MDP_AXI_CL 1263 <&mmcc MDP_AXI_CLK>;
1262 reg = <0x07600000 0x1 1264 reg = <0x07600000 0x100000>;
1263 interrupts = 1265 interrupts =
1264 <GIC_SPI 61 IRQ_T 1266 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
1265 <GIC_SPI 62 IRQ_T 1267 <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1266 qcom,ncb = <2>; 1268 qcom,ncb = <2>;
1267 }; 1269 };
1268 1270
1269 gfx3d: iommu@7c00000 { 1271 gfx3d: iommu@7c00000 {
1270 compatible = "qcom,ap 1272 compatible = "qcom,apq8064-iommu";
1271 #iommu-cells = <1>; 1273 #iommu-cells = <1>;
1272 clock-names = 1274 clock-names =
1273 "smmu_pclk", 1275 "smmu_pclk",
1274 "iommu_clk"; 1276 "iommu_clk";
1275 clocks = 1277 clocks =
1276 <&mmcc SMMU_AHB_C 1278 <&mmcc SMMU_AHB_CLK>,
1277 <&mmcc GFX3D_AXI_ 1279 <&mmcc GFX3D_AXI_CLK>;
1278 reg = <0x07c00000 0x1 1280 reg = <0x07c00000 0x100000>;
1279 interrupts = 1281 interrupts =
1280 <GIC_SPI 69 IRQ_T 1282 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1281 <GIC_SPI 70 IRQ_T 1283 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1282 qcom,ncb = <3>; 1284 qcom,ncb = <3>;
1283 }; 1285 };
1284 1286
1285 gfx3d1: iommu@7d00000 { 1287 gfx3d1: iommu@7d00000 {
1286 compatible = "qcom,ap 1288 compatible = "qcom,apq8064-iommu";
1287 #iommu-cells = <1>; 1289 #iommu-cells = <1>;
1288 clock-names = 1290 clock-names =
1289 "smmu_pclk", 1291 "smmu_pclk",
1290 "iommu_clk"; 1292 "iommu_clk";
1291 clocks = 1293 clocks =
1292 <&mmcc SMMU_AHB_C 1294 <&mmcc SMMU_AHB_CLK>,
1293 <&mmcc GFX3D_AXI_ 1295 <&mmcc GFX3D_AXI_CLK>;
1294 reg = <0x07d00000 0x1 1296 reg = <0x07d00000 0x100000>;
1295 interrupts = 1297 interrupts =
1296 <GIC_SPI 210 IRQ_ 1298 <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
1297 <GIC_SPI 211 IRQ_ 1299 <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
1298 qcom,ncb = <3>; 1300 qcom,ncb = <3>;
1299 }; 1301 };
1300 1302
1301 pcie: pcie@1b500000 { 1303 pcie: pcie@1b500000 {
1302 compatible = "qcom,pc 1304 compatible = "qcom,pcie-apq8064";
1303 reg = <0x1b500000 0x1 1305 reg = <0x1b500000 0x1000>,
1304 <0x1b502000 0x8 1306 <0x1b502000 0x80>,
1305 <0x1b600000 0x1 1307 <0x1b600000 0x100>,
1306 <0x0ff00000 0x1 1308 <0x0ff00000 0x100000>;
1307 reg-names = "dbi", "e 1309 reg-names = "dbi", "elbi", "parf", "config";
1308 device_type = "pci"; 1310 device_type = "pci";
1309 linux,pci-domain = <0 1311 linux,pci-domain = <0>;
1310 bus-range = <0x00 0xf 1312 bus-range = <0x00 0xff>;
1311 num-lanes = <1>; 1313 num-lanes = <1>;
1312 #address-cells = <3>; 1314 #address-cells = <3>;
1313 #size-cells = <2>; 1315 #size-cells = <2>;
1314 ranges = <0x81000000 1316 ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
1315 <0x82000000 1317 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
1316 interrupts = <GIC_SPI 1318 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
1317 interrupt-names = "ms 1319 interrupt-names = "msi";
1318 #interrupt-cells = <1 1320 #interrupt-cells = <1>;
1319 interrupt-map-mask = 1321 interrupt-map-mask = <0 0 0 0x7>;
1320 interrupt-map = <0 0 1322 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1321 <0 0 1323 <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1322 <0 0 1324 <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1323 <0 0 1325 <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1324 clocks = <&gcc PCIE_A 1326 clocks = <&gcc PCIE_A_CLK>,
1325 <&gcc PCIE_H 1327 <&gcc PCIE_H_CLK>,
1326 <&gcc PCIE_P 1328 <&gcc PCIE_PHY_REF_CLK>;
1327 clock-names = "core", 1329 clock-names = "core", "iface", "phy";
1328 resets = <&gcc PCIE_A 1330 resets = <&gcc PCIE_ACLK_RESET>,
1329 <&gcc PCIE_H 1331 <&gcc PCIE_HCLK_RESET>,
1330 <&gcc PCIE_P 1332 <&gcc PCIE_POR_RESET>,
1331 <&gcc PCIE_P 1333 <&gcc PCIE_PCI_RESET>,
1332 <&gcc PCIE_P 1334 <&gcc PCIE_PHY_RESET>;
1333 reset-names = "axi", 1335 reset-names = "axi", "ahb", "por", "pci", "phy";
1334 status = "disabled"; 1336 status = "disabled";
1335 <<
1336 pcie@0 { <<
1337 device_type = <<
1338 reg = <0x0 0x <<
1339 bus-range = < <<
1340 <<
1341 #address-cell <<
1342 #size-cells = <<
1343 ranges; <<
1344 }; <<
1345 }; 1337 };
1346 1338
1347 hdmi: hdmi-tx@4a00000 { 1339 hdmi: hdmi-tx@4a00000 {
1348 compatible = "qcom,hd 1340 compatible = "qcom,hdmi-tx-8960";
1349 pinctrl-names = "defa 1341 pinctrl-names = "default";
1350 pinctrl-0 = <&hdmi_pi 1342 pinctrl-0 = <&hdmi_pinctrl>;
1351 reg = <0x04a00000 0x2 1343 reg = <0x04a00000 0x2f0>;
1352 reg-names = "core_phy 1344 reg-names = "core_physical";
1353 interrupts = <GIC_SPI 1345 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
1354 clocks = <&mmcc HDMI_ 1346 clocks = <&mmcc HDMI_APP_CLK>,
1355 <&mmcc HDMI_ 1347 <&mmcc HDMI_M_AHB_CLK>,
1356 <&mmcc HDMI_ 1348 <&mmcc HDMI_S_AHB_CLK>;
1357 clock-names = "core", 1349 clock-names = "core",
1358 "master 1350 "master_iface",
1359 "slave_ 1351 "slave_iface";
1360 1352
1361 phys = <&hdmi_phy>; 1353 phys = <&hdmi_phy>;
1362 1354
1363 status = "disabled"; 1355 status = "disabled";
1364 1356
1365 ports { 1357 ports {
1366 #address-cell 1358 #address-cells = <1>;
1367 #size-cells = 1359 #size-cells = <0>;
1368 1360
1369 port@0 { 1361 port@0 {
1370 reg = 1362 reg = <0>;
1371 hdmi_ 1363 hdmi_in: endpoint {
1372 }; 1364 };
1373 }; 1365 };
1374 1366
1375 port@1 { 1367 port@1 {
1376 reg = 1368 reg = <1>;
1377 hdmi_ 1369 hdmi_out: endpoint {
1378 }; 1370 };
1379 }; 1371 };
1380 }; 1372 };
1381 }; 1373 };
1382 1374
1383 hdmi_phy: phy@4a00400 { 1375 hdmi_phy: phy@4a00400 {
1384 compatible = "qcom,hd 1376 compatible = "qcom,hdmi-phy-8960";
1385 reg = <0x4a00400 0x60 1377 reg = <0x4a00400 0x60>,
1386 <0x4a00500 0x10 1378 <0x4a00500 0x100>;
1387 reg-names = "hdmi_phy 1379 reg-names = "hdmi_phy",
1388 "hdmi_pll 1380 "hdmi_pll";
1389 1381
1390 clocks = <&mmcc HDMI_ 1382 clocks = <&mmcc HDMI_S_AHB_CLK>;
1391 clock-names = "slave_ 1383 clock-names = "slave_iface";
1392 #phy-cells = <0>; 1384 #phy-cells = <0>;
1393 #clock-cells = <0>; 1385 #clock-cells = <0>;
1394 1386
1395 status = "disabled"; 1387 status = "disabled";
1396 }; 1388 };
1397 1389
1398 mdp: display-controller@51000 1390 mdp: display-controller@5100000 {
1399 compatible = "qcom,md 1391 compatible = "qcom,mdp4";
1400 reg = <0x05100000 0xf 1392 reg = <0x05100000 0xf0000>;
1401 interrupts = <GIC_SPI 1393 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1402 clocks = <&mmcc MDP_C 1394 clocks = <&mmcc MDP_CLK>,
1403 <&mmcc MDP_A 1395 <&mmcc MDP_AHB_CLK>,
1404 <&mmcc MDP_A 1396 <&mmcc MDP_AXI_CLK>,
1405 <&mmcc MDP_L 1397 <&mmcc MDP_LUT_CLK>,
1406 <&mmcc HDMI_ 1398 <&mmcc HDMI_TV_CLK>,
1407 <&mmcc MDP_T 1399 <&mmcc MDP_TV_CLK>;
1408 clock-names = "core_c 1400 clock-names = "core_clk",
1409 "iface_ 1401 "iface_clk",
1410 "bus_cl 1402 "bus_clk",
1411 "lut_cl 1403 "lut_clk",
1412 "hdmi_c 1404 "hdmi_clk",
1413 "tv_clk 1405 "tv_clk";
1414 1406
1415 iommus = <&mdp_port0 1407 iommus = <&mdp_port0 0
1416 &mdp_port0 1408 &mdp_port0 2
1417 &mdp_port1 1409 &mdp_port1 0
1418 &mdp_port1 1410 &mdp_port1 2>;
1419 1411
1420 ports { 1412 ports {
1421 #address-cell 1413 #address-cells = <1>;
1422 #size-cells = 1414 #size-cells = <0>;
1423 1415
1424 port@0 { 1416 port@0 {
1425 reg = 1417 reg = <0>;
1426 mdp_l 1418 mdp_lvds_out: endpoint {
1427 }; 1419 };
1428 }; 1420 };
1429 1421
1430 port@1 { 1422 port@1 {
1431 reg = 1423 reg = <1>;
1432 mdp_d 1424 mdp_dsi1_out: endpoint {
1433 }; 1425 };
1434 }; 1426 };
1435 1427
1436 port@2 { 1428 port@2 {
1437 reg = 1429 reg = <2>;
1438 mdp_d 1430 mdp_dsi2_out: endpoint {
1439 }; 1431 };
1440 }; 1432 };
1441 1433
1442 port@3 { 1434 port@3 {
1443 reg = 1435 reg = <3>;
1444 mdp_d 1436 mdp_dtv_out: endpoint {
1445 }; 1437 };
1446 }; 1438 };
1447 }; 1439 };
1448 }; 1440 };
1449 1441
1450 riva: riva-pil@3200800 { 1442 riva: riva-pil@3200800 {
1451 compatible = "qcom,ri 1443 compatible = "qcom,riva-pil";
1452 1444
1453 reg = <0x03200800 0x1 1445 reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
1454 reg-names = "ccu", "d 1446 reg-names = "ccu", "dxe", "pmu";
1455 1447
1456 interrupts-extended = 1448 interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
1457 1449 <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
1458 interrupt-names = "wd 1450 interrupt-names = "wdog", "fatal";
1459 1451
1460 memory-region = <&wcn 1452 memory-region = <&wcnss_mem>;
1461 1453
1462 status = "disabled"; 1454 status = "disabled";
1463 1455
1464 iris { 1456 iris {
1465 compatible = 1457 compatible = "qcom,wcn3660";
1466 1458
1467 clocks = <&cx 1459 clocks = <&cxo_board>;
1468 clock-names = 1460 clock-names = "xo";
1469 }; 1461 };
1470 1462
1471 smd-edge { 1463 smd-edge {
1472 interrupts = 1464 interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
1473 1465
1474 qcom,ipc = <& 1466 qcom,ipc = <&l2cc 8 25>;
1475 qcom,smd-edge 1467 qcom,smd-edge = <6>;
1476 1468
1477 label = "riva 1469 label = "riva";
1478 1470
1479 wcnss { 1471 wcnss {
1480 compa 1472 compatible = "qcom,wcnss";
1481 qcom, 1473 qcom,smd-channels = "WCNSS_CTRL";
1482 1474
1483 qcom, 1475 qcom,mmio = <&riva>;
1484 1476
1485 bluet 1477 bluetooth {
1486 1478 compatible = "qcom,wcnss-bt";
1487 }; 1479 };
1488 1480
1489 wifi 1481 wifi {
1490 1482 compatible = "qcom,wcnss-wlan";
1491 1483
1492 1484 interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
1493 1485 <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
1494 1486 interrupt-names = "tx", "rx";
1495 1487
1496 1488 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
1497 1489 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
1498 }; 1490 };
1499 }; 1491 };
1500 }; 1492 };
1501 }; 1493 };
1502 1494
1503 etb@1a01000 { 1495 etb@1a01000 {
1504 compatible = "arm,cor 1496 compatible = "arm,coresight-etb10", "arm,primecell";
1505 reg = <0x1a01000 0x10 1497 reg = <0x1a01000 0x1000>;
1506 1498
1507 clocks = <&rpmcc RPM_ 1499 clocks = <&rpmcc RPM_QDSS_CLK>;
1508 clock-names = "apb_pc 1500 clock-names = "apb_pclk";
1509 1501
1510 in-ports { 1502 in-ports {
1511 port { 1503 port {
1512 etb_i 1504 etb_in: endpoint {
1513 1505 remote-endpoint = <&replicator_out0>;
1514 }; 1506 };
1515 }; 1507 };
1516 }; 1508 };
1517 }; 1509 };
1518 1510
1519 tpiu@1a03000 { 1511 tpiu@1a03000 {
1520 compatible = "arm,cor 1512 compatible = "arm,coresight-tpiu", "arm,primecell";
1521 reg = <0x1a03000 0x10 1513 reg = <0x1a03000 0x1000>;
1522 1514
1523 clocks = <&rpmcc RPM_ 1515 clocks = <&rpmcc RPM_QDSS_CLK>;
1524 clock-names = "apb_pc 1516 clock-names = "apb_pclk";
1525 1517
1526 in-ports { 1518 in-ports {
1527 port { 1519 port {
1528 tpiu_ 1520 tpiu_in: endpoint {
1529 1521 remote-endpoint = <&replicator_out1>;
1530 }; 1522 };
1531 }; 1523 };
1532 }; 1524 };
1533 }; 1525 };
1534 1526
1535 replicator { 1527 replicator {
1536 compatible = "arm,cor 1528 compatible = "arm,coresight-static-replicator";
1537 1529
1538 clocks = <&rpmcc RPM_ 1530 clocks = <&rpmcc RPM_QDSS_CLK>;
1539 clock-names = "apb_pc 1531 clock-names = "apb_pclk";
1540 1532
1541 out-ports { 1533 out-ports {
1542 #address-cell 1534 #address-cells = <1>;
1543 #size-cells = 1535 #size-cells = <0>;
1544 1536
1545 port@0 { 1537 port@0 {
1546 reg = 1538 reg = <0>;
1547 repli 1539 replicator_out0: endpoint {
1548 1540 remote-endpoint = <&etb_in>;
1549 }; 1541 };
1550 }; 1542 };
1551 port@1 { 1543 port@1 {
1552 reg = 1544 reg = <1>;
1553 repli 1545 replicator_out1: endpoint {
1554 1546 remote-endpoint = <&tpiu_in>;
1555 }; 1547 };
1556 }; 1548 };
1557 }; 1549 };
1558 1550
1559 in-ports { 1551 in-ports {
1560 port { 1552 port {
1561 repli 1553 replicator_in: endpoint {
1562 1554 remote-endpoint = <&funnel_out>;
1563 }; 1555 };
1564 }; 1556 };
1565 }; 1557 };
1566 }; 1558 };
1567 1559
1568 funnel@1a04000 { 1560 funnel@1a04000 {
1569 compatible = "arm,cor 1561 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1570 reg = <0x1a04000 0x10 1562 reg = <0x1a04000 0x1000>;
1571 1563
1572 clocks = <&rpmcc RPM_ 1564 clocks = <&rpmcc RPM_QDSS_CLK>;
1573 clock-names = "apb_pc 1565 clock-names = "apb_pclk";
1574 1566
1575 in-ports { 1567 in-ports {
1576 #address-cell 1568 #address-cells = <1>;
1577 #size-cells = 1569 #size-cells = <0>;
1578 1570
1579 /* 1571 /*
1580 * Not descri 1572 * Not described input ports:
1581 * 2 - connec 1573 * 2 - connected to STM component
1582 * 3 - not-co 1574 * 3 - not-connected
1583 * 6 - not-co 1575 * 6 - not-connected
1584 * 7 - not-co 1576 * 7 - not-connected
1585 */ 1577 */
1586 port@0 { 1578 port@0 {
1587 reg = 1579 reg = <0>;
1588 funne 1580 funnel_in0: endpoint {
1589 1581 remote-endpoint = <&etm0_out>;
1590 }; 1582 };
1591 }; 1583 };
1592 port@1 { 1584 port@1 {
1593 reg = 1585 reg = <1>;
1594 funne 1586 funnel_in1: endpoint {
1595 1587 remote-endpoint = <&etm1_out>;
1596 }; 1588 };
1597 }; 1589 };
1598 port@4 { 1590 port@4 {
1599 reg = 1591 reg = <4>;
1600 funne 1592 funnel_in4: endpoint {
1601 1593 remote-endpoint = <&etm2_out>;
1602 }; 1594 };
1603 }; 1595 };
1604 port@5 { 1596 port@5 {
1605 reg = 1597 reg = <5>;
1606 funne 1598 funnel_in5: endpoint {
1607 1599 remote-endpoint = <&etm3_out>;
1608 }; 1600 };
1609 }; 1601 };
1610 }; 1602 };
1611 1603
1612 out-ports { 1604 out-ports {
1613 port { 1605 port {
1614 funne 1606 funnel_out: endpoint {
1615 1607 remote-endpoint = <&replicator_in>;
1616 }; 1608 };
1617 }; 1609 };
1618 }; 1610 };
1619 }; 1611 };
1620 1612
1621 etm@1a1c000 { 1613 etm@1a1c000 {
1622 compatible = "arm,cor 1614 compatible = "arm,coresight-etm3x", "arm,primecell";
1623 reg = <0x1a1c000 0x10 1615 reg = <0x1a1c000 0x1000>;
1624 1616
1625 clocks = <&rpmcc RPM_ 1617 clocks = <&rpmcc RPM_QDSS_CLK>;
1626 clock-names = "apb_pc 1618 clock-names = "apb_pclk";
1627 1619
1628 cpu = <&CPU0>; 1620 cpu = <&CPU0>;
1629 1621
1630 out-ports { 1622 out-ports {
1631 port { 1623 port {
1632 etm0_ 1624 etm0_out: endpoint {
1633 1625 remote-endpoint = <&funnel_in0>;
1634 }; 1626 };
1635 }; 1627 };
1636 }; 1628 };
1637 }; 1629 };
1638 1630
1639 etm@1a1d000 { 1631 etm@1a1d000 {
1640 compatible = "arm,cor 1632 compatible = "arm,coresight-etm3x", "arm,primecell";
1641 reg = <0x1a1d000 0x10 1633 reg = <0x1a1d000 0x1000>;
1642 1634
1643 clocks = <&rpmcc RPM_ 1635 clocks = <&rpmcc RPM_QDSS_CLK>;
1644 clock-names = "apb_pc 1636 clock-names = "apb_pclk";
1645 1637
1646 cpu = <&CPU1>; 1638 cpu = <&CPU1>;
1647 1639
1648 out-ports { 1640 out-ports {
1649 port { 1641 port {
1650 etm1_ 1642 etm1_out: endpoint {
1651 1643 remote-endpoint = <&funnel_in1>;
1652 }; 1644 };
1653 }; 1645 };
1654 }; 1646 };
1655 }; 1647 };
1656 1648
1657 etm@1a1e000 { 1649 etm@1a1e000 {
1658 compatible = "arm,cor 1650 compatible = "arm,coresight-etm3x", "arm,primecell";
1659 reg = <0x1a1e000 0x10 1651 reg = <0x1a1e000 0x1000>;
1660 1652
1661 clocks = <&rpmcc RPM_ 1653 clocks = <&rpmcc RPM_QDSS_CLK>;
1662 clock-names = "apb_pc 1654 clock-names = "apb_pclk";
1663 1655
1664 cpu = <&CPU2>; 1656 cpu = <&CPU2>;
1665 1657
1666 out-ports { 1658 out-ports {
1667 port { 1659 port {
1668 etm2_ 1660 etm2_out: endpoint {
1669 1661 remote-endpoint = <&funnel_in4>;
1670 }; 1662 };
1671 }; 1663 };
1672 }; 1664 };
1673 }; 1665 };
1674 1666
1675 etm@1a1f000 { 1667 etm@1a1f000 {
1676 compatible = "arm,cor 1668 compatible = "arm,coresight-etm3x", "arm,primecell";
1677 reg = <0x1a1f000 0x10 1669 reg = <0x1a1f000 0x1000>;
1678 1670
1679 clocks = <&rpmcc RPM_ 1671 clocks = <&rpmcc RPM_QDSS_CLK>;
1680 clock-names = "apb_pc 1672 clock-names = "apb_pclk";
1681 1673
1682 cpu = <&CPU3>; 1674 cpu = <&CPU3>;
1683 1675
1684 out-ports { 1676 out-ports {
1685 port { 1677 port {
1686 etm3_ 1678 etm3_out: endpoint {
1687 1679 remote-endpoint = <&funnel_in5>;
1688 }; 1680 };
1689 }; 1681 };
1690 }; 1682 };
1691 }; 1683 };
1692 }; 1684 };
1693 }; 1685 };
1694 #include "qcom-apq8064-pins.dtsi" 1686 #include "qcom-apq8064-pins.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.