1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-ipq8064.dtsi"
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/leds/common.h>
5
6 / {
7 model = "MikroTik RB3011UiAS-RM";
8 compatible = "mikrotik,rb3011", "qcom,
9
10 aliases {
11 serial0 = &gsbi7_serial;
12 ethernet0 = &gmac0;
13 ethernet1 = &gmac3;
14 mdio-gpio0 = &mdio0;
15 mdio-gpio1 = &mdio1;
16 };
17
18 chosen {
19 bootargs = "loglevel=8 console
20 stdout-path = "serial0:115200n
21 };
22
23 gpio-keys {
24 compatible = "gpio-keys";
25 pinctrl-0 = <&buttons_pins>;
26 pinctrl-names = "default";
27
28 button {
29 label = "reset";
30 linux,code = <KEY_REST
31 gpios = <&qcom_pinmux
32 linux,input-type = <1>
33 debounce-interval = <6
34 };
35 };
36
37 leds {
38 compatible = "gpio-leds";
39 pinctrl-0 = <&leds_pins>;
40 pinctrl-names = "default";
41
42 led-0 {
43 label = "rb3011:green:
44 color = <LED_COLOR_ID_
45 gpios = <&qcom_pinmux
46 default-state = "off";
47 };
48 };
49
50 memory@42000000 {
51 reg = <0x42000000 0x3e000000>;
52 device_type = "memory";
53 };
54
55 mdio0: mdio-0 {
56 status = "okay";
57 compatible = "virtual,mdio-gpi
58 gpios = <&qcom_pinmux 1 GPIO_A
59 <&qcom_pinmux 0 GPIO_A
60 #address-cells = <1>;
61 #size-cells = <0>;
62
63 pinctrl-0 = <&mdio0_pins>;
64 pinctrl-names = "default";
65
66 switch0: switch@10 {
67 compatible = "qca,qca8
68
69 dsa,member = <0 0>;
70
71 pinctrl-0 = <&sw0_rese
72 pinctrl-names = "defau
73
74 reset-gpios = <&qcom_p
75 reg = <0x10>;
76
77 ports {
78 #address-cells
79 #size-cells =
80
81 switch0cpu: po
82 reg =
83 label
84 ethern
85 phy-mo
86 fixed-
87
88
89 };
90 };
91
92 port@1 {
93 reg =
94 label
95
96 leds {
97
98
99
100
101
102
103
104
105
106 };
107 };
108
109 port@2 {
110 reg =
111 label
112
113 leds {
114
115
116
117
118
119
120
121
122
123 };
124 };
125
126 port@3 {
127 reg =
128 label
129
130 leds {
131
132
133
134
135
136
137
138
139
140 };
141 };
142
143 port@4 {
144 reg =
145 label
146
147 leds {
148
149
150
151
152
153
154
155
156
157 };
158 };
159
160 port@5 {
161 reg =
162 label
163
164 leds {
165
166
167
168
169
170
171
172
173
174 };
175 };
176 };
177 };
178 };
179
180 mdio1: mdio-1 {
181 status = "okay";
182 compatible = "virtual,mdio-gpi
183 gpios = <&qcom_pinmux 11 GPIO_
184 <&qcom_pinmux 10 GPIO_
185 #address-cells = <1>;
186 #size-cells = <0>;
187
188 pinctrl-0 = <&mdio1_pins>;
189 pinctrl-names = "default";
190
191 switch1: switch@14 {
192 compatible = "qca,qca8
193
194 dsa,member = <1 0>;
195
196 pinctrl-0 = <&sw1_rese
197 pinctrl-names = "defau
198
199 reset-gpios = <&qcom_p
200 reg = <0x10>;
201
202 ports {
203 #address-cells
204 #size-cells =
205
206 switch1cpu: po
207 reg =
208 label
209 ethern
210 phy-mo
211 fixed-
212
213
214 };
215 };
216
217 port@1 {
218 reg =
219 label
220
221 leds {
222
223
224
225
226
227
228
229
230
231 };
232 };
233
234 port@2 {
235 reg =
236 label
237
238 leds {
239
240
241
242
243
244
245
246
247
248 };
249 };
250
251 port@3 {
252 reg =
253 label
254
255 leds {
256
257
258
259
260
261
262
263
264
265 };
266 };
267
268 port@4 {
269 reg =
270 label
271
272 leds {
273
274
275
276
277
278
279
280
281
282 };
283 };
284
285 port@5 {
286 reg =
287 label
288
289 leds {
290
291
292
293
294
295
296
297
298
299 };
300 };
301 };
302 };
303 };
304
305 soc {
306 gsbi5: gsbi@1a200000 {
307 qcom,mode = <GSBI_PROT
308 status = "okay";
309
310 spi4: spi@1a280000 {
311 status = "okay
312
313 pinctrl-0 = <&
314 pinctrl-names
315
316 cs-gpios = <&q
317
318 norflash: flas
319 compat
320 #addre
321 #size-
322 spi-ma
323 reg =
324
325 partit
326
327
328 };
329 };
330 };
331 };
332 };
333 };
334
335 &adm_dma {
336 status = "okay";
337 };
338
339 &gmac0 {
340 status = "okay";
341
342 phy-mode = "rgmii";
343 qcom,id = <0>;
344 phy-handle = <&switch0cpu>;
345
346 fixed-link {
347 speed = <1000>;
348 full-duplex;
349 };
350 };
351
352 &gmac3 {
353 status = "okay";
354
355 phy-mode = "sgmii";
356 qcom,id = <3>;
357 phy-handle = <&switch1cpu>;
358
359 fixed-link {
360 speed = <1000>;
361 full-duplex;
362 };
363 };
364
365 &gsbi7 {
366 status = "okay";
367 qcom,mode = <GSBI_PROT_I2C_UART>;
368 };
369
370 &gsbi7_serial {
371 status = "okay";
372 };
373
374 &hs_phy_1 {
375 status = "okay";
376 };
377
378 &nand {
379 status = "okay";
380
381 nand@0 {
382 reg = <0>;
383
384 nand-ecc-strength = <4>;
385 nand-bus-width = <8>;
386 nand-ecc-step-size = <512>;
387
388 partitions {
389 compatible = "fixed-pa
390 #address-cells = <1>;
391 #size-cells = <1>;
392
393 boot@0 {
394 label = "Route
395 reg = <0x00000
396 };
397
398 main@800000 {
399 label = "Route
400 reg = <0x08000
401 };
402 };
403 };
404 };
405
406 &qcom_pinmux {
407 buttons_pins: buttons-state {
408 pins = "gpio66";
409 function = "gpio";
410 drive-strength = <16>;
411 bias-disable;
412 };
413
414 leds_pins: leds-state {
415 pins = "gpio33";
416 function = "gpio";
417 drive-strength = <16>;
418 bias-disable;
419 };
420
421 mdio1_pins: mdio1-state {
422 pins = "gpio10", "gpio11";
423 function = "gpio";
424 drive-strength = <8>;
425 bias-disable;
426 };
427
428 sw0_reset_pin: sw0-reset-state {
429 pins = "gpio16";
430 drive-strength = <16>;
431 function = "gpio";
432 bias-disable;
433 input-disable;
434 };
435
436 sw1_reset_pin: sw1-reset-state {
437 pins = "gpio17";
438 drive-strength = <16>;
439 function = "gpio";
440 bias-disable;
441 input-disable;
442 };
443
444 usb1_pwr_en_pins: usb1-pwr-en-state {
445 pins = "gpio4";
446 function = "gpio";
447 drive-strength = <16>;
448 bias-disable;
449 output-high;
450 };
451 };
452
453 &ss_phy_1 {
454 status = "okay";
455 };
456
457 &usb3_1 {
458 pinctrl-0 = <&usb1_pwr_en_pins>;
459 pinctrl-names = "default";
460
461 status = "okay";
462 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.