1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974pro.dtsi"
3 #include "pm8841.dtsi"
4 #include "pm8941.dtsi"
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h
8
9 / {
10 model = "Fairphone 2";
11 compatible = "fairphone,fp2", "qcom,ms
12 chassis-type = "handset";
13
14 aliases {
15 mmc0 = &sdhc_1;
16 mmc1 = &sdhc_2;
17 serial0 = &blsp1_uart2;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n
22 };
23
24 gpio-keys {
25 compatible = "gpio-keys";
26
27 pinctrl-names = "default";
28 pinctrl-0 = <&gpio_keys_pin_a>
29
30 key-camera-snapshot {
31 label = "camera_snapsh
32 gpios = <&pm8941_gpios
33 linux,code = <KEY_CAME
34 wakeup-source;
35 debounce-interval = <1
36 };
37
38 key-volume-down {
39 label = "volume_down";
40 gpios = <&pm8941_gpios
41 linux,code = <KEY_VOLU
42 wakeup-source;
43 debounce-interval = <1
44 };
45
46 key-volume-up {
47 label = "volume_up";
48 gpios = <&pm8941_gpios
49 linux,code = <KEY_VOLU
50 wakeup-source;
51 debounce-interval = <1
52 };
53 };
54
55 vibrator {
56 compatible = "gpio-vibrator";
57 enable-gpios = <&tlmm 86 GPIO_
58 vcc-supply = <&pm8941_l18>;
59 };
60
61 vreg_boost: vreg-boost {
62 compatible = "regulator-fixed"
63
64 regulator-name = "vreg-boost";
65 regulator-min-microvolt = <315
66 regulator-max-microvolt = <315
67
68 regulator-always-on;
69 regulator-boot-on;
70
71 gpio = <&pm8941_gpios 21 GPIO_
72 enable-active-high;
73
74 pinctrl-names = "default";
75 pinctrl-0 = <&boost_bypass_n_p
76 };
77
78 vreg_vph_pwr: vreg-vph-pwr {
79 compatible = "regulator-fixed"
80 regulator-name = "vph-pwr";
81
82 regulator-min-microvolt = <360
83 regulator-max-microvolt = <360
84
85 regulator-always-on;
86 };
87 };
88
89 &blsp1_i2c2 {
90 status = "okay";
91
92 touchscreen@41 {
93 compatible = "ilitek,ili2120";
94 reg = <0x41>;
95 interrupt-parent = <&tlmm>;
96 interrupts = <28 IRQ_TYPE_EDGE
97 reset-gpios = <&tlmm 55 GPIO_A
98
99 touchscreen-size-x = <1080>;
100 touchscreen-size-y = <1920>;
101 };
102 };
103
104 &blsp1_uart2 {
105 status = "okay";
106 };
107
108 &imem {
109 reboot-mode {
110 mode-normal = <0x77665501>;
111 mode-bootloader = <0x77665500>
112 mode-recovery = <0x77665502>;
113 };
114 };
115
116 &pm8941_gpios {
117 gpio_keys_pin_a: gpio-keys-active-stat
118 pins = "gpio1", "gpio2", "gpio
119 function = "normal";
120
121 bias-pull-up;
122 power-source = <PM8941_GPIO_S3
123 };
124 };
125
126 &pm8941_lpg {
127 status = "okay";
128
129 qcom,power-source = <1>;
130
131 multi-led {
132 color = <LED_COLOR_ID_RGB>;
133 function = LED_FUNCTION_STATUS
134
135 #address-cells = <1>;
136 #size-cells = <0>;
137
138 led@7 {
139 reg = <7>;
140 color = <LED_COLOR_ID_
141 };
142
143 led@6 {
144 reg = <6>;
145 color = <LED_COLOR_ID_
146 };
147
148 led@5 {
149 reg = <5>;
150 color = <LED_COLOR_ID_
151 };
152 };
153 };
154
155 &pronto {
156 status = "okay";
157
158 vddmx-supply = <&pm8841_s1>;
159 vddcx-supply = <&pm8841_s2>;
160 vddpx-supply = <&pm8941_s3>;
161
162 pinctrl-names = "default";
163 pinctrl-0 = <&wcnss_pin_a>;
164
165 iris {
166 vddxo-supply = <&pm8941_l6>;
167 vddrfa-supply = <&pm8941_l11>;
168 vddpa-supply = <&pm8941_l19>;
169 vdddig-supply = <&pm8941_s3>;
170 };
171
172 smd-edge {
173 qcom,remote-pid = <4>;
174 label = "pronto";
175
176 wcnss {
177 status = "okay";
178 };
179 };
180 };
181
182 &remoteproc_adsp {
183 status = "okay";
184 cx-supply = <&pm8841_s2>;
185 };
186
187 &remoteproc_mss {
188 status = "okay";
189 cx-supply = <&pm8841_s2>;
190 mss-supply = <&pm8841_s3>;
191 mx-supply = <&pm8841_s1>;
192 pll-supply = <&pm8941_l12>;
193 };
194
195 &rpm_requests {
196 regulators-0 {
197 compatible = "qcom,rpm-pm8841-
198
199 pm8841_s1: s1 {
200 regulator-min-microvol
201 regulator-max-microvol
202 };
203
204 pm8841_s2: s2 {
205 regulator-min-microvol
206 regulator-max-microvol
207 };
208
209 pm8841_s3: s3 {
210 regulator-min-microvol
211 regulator-max-microvol
212 };
213 };
214
215 regulators-1 {
216 compatible = "qcom,rpm-pm8941-
217
218 vdd_l1_l3-supply = <&pm8941_s1
219 vdd_l2_lvs1_2_3-supply = <&pm8
220 vdd_l4_l11-supply = <&pm8941_s
221 vdd_l5_l7-supply = <&pm8941_s2
222 vdd_l6_l12_l14_l15-supply = <&
223 vdd_l9_l10_l17_l22-supply = <&
224 vdd_l13_l20_l23_l24-supply = <
225 vdd_l21-supply = <&vreg_boost>
226
227 pm8941_s1: s1 {
228 regulator-min-microvol
229 regulator-max-microvol
230 regulator-always-on;
231 regulator-boot-on;
232 };
233
234 pm8941_s2: s2 {
235 regulator-min-microvol
236 regulator-max-microvol
237 regulator-boot-on;
238 };
239
240 pm8941_s3: s3 {
241 regulator-min-microvol
242 regulator-max-microvol
243 regulator-always-on;
244 regulator-boot-on;
245 };
246
247 pm8941_l1: l1 {
248 regulator-min-microvol
249 regulator-max-microvol
250 regulator-always-on;
251 regulator-boot-on;
252 };
253
254 pm8941_l2: l2 {
255 regulator-min-microvol
256 regulator-max-microvol
257 };
258
259 pm8941_l3: l3 {
260 regulator-min-microvol
261 regulator-max-microvol
262 };
263
264 pm8941_l4: l4 {
265 regulator-min-microvol
266 regulator-max-microvol
267 };
268
269 pm8941_l5: l5 {
270 regulator-min-microvol
271 regulator-max-microvol
272 };
273
274 pm8941_l6: l6 {
275 regulator-min-microvol
276 regulator-max-microvol
277 regulator-boot-on;
278 };
279
280 pm8941_l7: l7 {
281 regulator-min-microvol
282 regulator-max-microvol
283 regulator-boot-on;
284 };
285
286 pm8941_l8: l8 {
287 regulator-min-microvol
288 regulator-max-microvol
289 };
290
291 pm8941_l9: l9 {
292 regulator-min-microvol
293 regulator-max-microvol
294 };
295
296 pm8941_l10: l10 {
297 regulator-min-microvol
298 regulator-max-microvol
299 };
300
301 pm8941_l11: l11 {
302 regulator-min-microvol
303 regulator-max-microvol
304 };
305
306 pm8941_l12: l12 {
307 regulator-min-microvol
308 regulator-max-microvol
309 regulator-always-on;
310 regulator-boot-on;
311 };
312
313 pm8941_l13: l13 {
314 regulator-min-microvol
315 regulator-max-microvol
316 regulator-boot-on;
317 };
318
319 pm8941_l14: l14 {
320 regulator-min-microvol
321 regulator-max-microvol
322 };
323
324 pm8941_l15: l15 {
325 regulator-min-microvol
326 regulator-max-microvol
327 };
328
329 pm8941_l16: l16 {
330 regulator-min-microvol
331 regulator-max-microvol
332 };
333
334 pm8941_l17: l17 {
335 regulator-min-microvol
336 regulator-max-microvol
337 };
338
339 pm8941_l18: l18 {
340 regulator-min-microvol
341 regulator-max-microvol
342 };
343
344 pm8941_l19: l19 {
345 regulator-min-microvol
346 regulator-max-microvol
347 };
348
349 pm8941_l20: l20 {
350 regulator-min-microvol
351 regulator-max-microvol
352 regulator-system-load
353 regulator-allow-set-lo
354 regulator-boot-on;
355 };
356
357 pm8941_l21: l21 {
358 regulator-min-microvol
359 regulator-max-microvol
360 regulator-boot-on;
361 };
362
363 pm8941_l22: l22 {
364 regulator-min-microvol
365 regulator-max-microvol
366 };
367
368 pm8941_l23: l23 {
369 regulator-min-microvol
370 regulator-max-microvol
371 };
372
373 pm8941_l24: l24 {
374 regulator-min-microvol
375 regulator-max-microvol
376 regulator-boot-on;
377 };
378 };
379 };
380
381 &sdhc_1 {
382 status = "okay";
383
384 vmmc-supply = <&pm8941_l20>;
385 vqmmc-supply = <&pm8941_s3>;
386
387 pinctrl-names = "default", "sleep";
388 pinctrl-0 = <&sdc1_on>;
389 pinctrl-1 = <&sdc1_off>;
390 };
391
392 &sdhc_2 {
393 status = "okay";
394
395 vmmc-supply = <&pm8941_l21>;
396 vqmmc-supply = <&pm8941_l13>;
397
398 pinctrl-names = "default", "sleep";
399 pinctrl-0 = <&sdc2_on>;
400 pinctrl-1 = <&sdc2_off>;
401 };
402
403 &smbb {
404 usb-charge-current-limit = <1500000>;
405 qcom,fast-charge-safe-current = <15000
406 qcom,fast-charge-current-limit = <1500
407 qcom,fast-charge-safe-voltage = <43800
408 qcom,fast-charge-high-threshold-voltag
409 qcom,auto-recharge-threshold-voltage =
410 qcom,minimum-input-voltage = <4450000>
411
412 status = "okay";
413 };
414
415 &tlmm {
416 sdc1_on: sdc1-on-state {
417 clk-pins {
418 pins = "sdc1_clk";
419 drive-strength = <16>;
420 bias-disable;
421 };
422
423 cmd-data-pins {
424 pins = "sdc1_cmd", "sd
425 drive-strength = <10>;
426 bias-pull-up;
427 };
428 };
429
430 sdc2_on: sdc2-on-state {
431 clk-pins {
432 pins = "sdc2_clk";
433 drive-strength = <10>;
434 bias-disable;
435 };
436
437 cmd-data-pins {
438 pins = "sdc2_cmd", "sd
439 drive-strength = <6>;
440 bias-pull-up;
441 };
442 };
443
444 wcnss_pin_a: wcnss-pin-active-state {
445 wlan-pins {
446 pins = "gpio36", "gpio
447 function = "wlan";
448
449 drive-strength = <6>;
450 bias-pull-down;
451 };
452
453 bt-pins {
454 pins = "gpio35", "gpio
455 function = "bt";
456
457 drive-strength = <2>;
458 bias-pull-down;
459 };
460
461 fm-pins {
462 pins = "gpio41", "gpio
463 function = "fm";
464
465 drive-strength = <2>;
466 bias-pull-down;
467 };
468 };
469 };
470
471 &usb {
472 status = "okay";
473
474 phys = <&usb_hs1_phy>;
475 phy-select = <&tcsr 0xb000 0>;
476 extcon = <&smbb>, <&usb_id>;
477 vbus-supply = <&chg_otg>;
478
479 hnp-disable;
480 srp-disable;
481 adp-disable;
482 };
483
484 &usb_hs1_phy {
485 status = "okay";
486
487 v1p8-supply = <&pm8941_l6>;
488 v3p3-supply = <&pm8941_l24>;
489
490 extcon = <&smbb>;
491 qcom,init-seq = /bits/ 8 <0x1 0x64>;
492 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.