1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974pro.dtsi" 2 #include "qcom-msm8974pro.dtsi"
3 #include "pm8841.dtsi" !! 3 #include "qcom-pm8841.dtsi"
4 #include "pm8941.dtsi" !! 4 #include "qcom-pm8941.dtsi"
5 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 7
8 / { 8 / {
9 model = "OnePlus One"; 9 model = "OnePlus One";
10 compatible = "oneplus,bacon", "qcom,ms 10 compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
11 chassis-type = "handset"; 11 chassis-type = "handset";
12 qcom,msm-id = <194 0x10000>; 12 qcom,msm-id = <194 0x10000>;
13 qcom,board-id = <8 0>; 13 qcom,board-id = <8 0>;
14 14
15 aliases { 15 aliases {
16 serial0 = &blsp1_uart2; 16 serial0 = &blsp1_uart2;
17 }; 17 };
18 18
19 chosen { 19 chosen {
20 stdout-path = "serial0:115200n 20 stdout-path = "serial0:115200n8";
21 }; 21 };
22 22
23 gpio-keys { 23 gpio-keys {
24 compatible = "gpio-keys"; 24 compatible = "gpio-keys";
25 25
26 pinctrl-0 = <&gpio_keys_defaul 26 pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
27 pinctrl-names = "default"; 27 pinctrl-names = "default";
28 28
29 key-volume-down { 29 key-volume-down {
30 label = "Volume Down"; 30 label = "Volume Down";
31 gpios = <&pm8941_gpios 31 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_VOLU 32 linux,code = <KEY_VOLUMEDOWN>;
33 wakeup-source; 33 wakeup-source;
34 debounce-interval = <1 34 debounce-interval = <15>;
35 }; 35 };
36 36
37 key-volume-up { 37 key-volume-up {
38 label = "Volume Up"; 38 label = "Volume Up";
39 gpios = <&pm8941_gpios 39 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_VOLU 40 linux,code = <KEY_VOLUMEUP>;
41 wakeup-source; 41 wakeup-source;
42 debounce-interval = <1 42 debounce-interval = <15>;
43 }; 43 };
44 44
45 event-hall-sensor { 45 event-hall-sensor {
46 label = "Hall Effect S 46 label = "Hall Effect Sensor";
47 gpios = <&tlmm 68 GPIO 47 gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
48 linux,input-type = <EV 48 linux,input-type = <EV_SW>;
49 linux,code = <SW_LID>; 49 linux,code = <SW_LID>;
50 linux,can-disable; 50 linux,can-disable;
51 debounce-interval = <1 51 debounce-interval = <150>;
52 }; 52 };
53 }; 53 };
54 <<
55 vreg_boost: vreg-boost { <<
56 compatible = "regulator-fixed" <<
57 <<
58 regulator-name = "vreg-boost"; <<
59 regulator-min-microvolt = <315 <<
60 regulator-max-microvolt = <315 <<
61 <<
62 regulator-always-on; <<
63 regulator-boot-on; <<
64 <<
65 gpio = <&pm8941_gpios 21 GPIO_ <<
66 enable-active-high; <<
67 <<
68 pinctrl-names = "default"; <<
69 pinctrl-0 = <&boost_bypass_n_p <<
70 }; <<
71 <<
72 vreg_vph_pwr: vreg-vph-pwr { <<
73 compatible = "regulator-fixed" <<
74 regulator-name = "vph-pwr"; <<
75 <<
76 regulator-min-microvolt = <360 <<
77 regulator-max-microvolt = <360 <<
78 <<
79 regulator-always-on; <<
80 }; <<
81 }; 54 };
82 55
83 &blsp1_i2c1 { 56 &blsp1_i2c1 {
84 status = "okay"; 57 status = "okay";
85 58
86 fuel-gauge@55 { 59 fuel-gauge@55 {
87 compatible = "ti,bq27541"; 60 compatible = "ti,bq27541";
88 reg = <0x55>; 61 reg = <0x55>;
89 power-supplies = <&bq24196_cha 62 power-supplies = <&bq24196_charger>;
90 }; 63 };
91 }; 64 };
92 65
93 &blsp1_i2c2 { 66 &blsp1_i2c2 {
94 status = "okay"; 67 status = "okay";
95 68
96 rmi4-i2c-dev@20 { 69 rmi4-i2c-dev@20 {
97 compatible = "syna,rmi4-i2c"; 70 compatible = "syna,rmi4-i2c";
98 reg = <0x20>; 71 reg = <0x20>;
99 72
100 syna,startup-delay-ms = <100>; 73 syna,startup-delay-ms = <100>;
101 74
102 interrupts-extended = <&tlmm 6 75 interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
103 vdd-supply = <&pm8941_l22>; 76 vdd-supply = <&pm8941_l22>;
104 vio-supply = <&pm8941_lvs3>; 77 vio-supply = <&pm8941_lvs3>;
105 78
106 pinctrl-names = "default"; 79 pinctrl-names = "default";
107 pinctrl-0 = <&touch_default_st 80 pinctrl-0 = <&touch_default_state>;
108 81
109 #address-cells = <1>; 82 #address-cells = <1>;
110 #size-cells = <0>; 83 #size-cells = <0>;
111 84
112 rmi4-f01@1 { 85 rmi4-f01@1 {
113 reg = <0x1>; 86 reg = <0x1>;
114 syna,nosleep-mode = <1 87 syna,nosleep-mode = <1>;
115 }; 88 };
116 89
117 rmi4-f12@12 { 90 rmi4-f12@12 {
118 reg = <0x12>; 91 reg = <0x12>;
119 syna,sensor-type = <1> 92 syna,sensor-type = <1>;
120 /* 93 /*
121 * Touchscreen size is 94 * Touchscreen size is 2040x1080, y-values between
122 * 1920-2040 are used 95 * 1920-2040 are used for touchkey (menu, home & back).
123 * For now clip it off 96 * For now clip it off so we don't get touch events
124 * outside of the disp 97 * outside of the display area.
125 */ 98 */
126 syna,clip-y-high = <19 99 syna,clip-y-high = <1920>;
127 }; 100 };
128 }; 101 };
129 102
130 led-controller@36 { 103 led-controller@36 {
131 compatible = "ti,lm3630a"; 104 compatible = "ti,lm3630a";
132 reg = <0x36>; 105 reg = <0x36>;
133 106
134 #address-cells = <1>; 107 #address-cells = <1>;
135 #size-cells = <0>; 108 #size-cells = <0>;
136 109
137 led@0 { 110 led@0 {
138 reg = <0>; 111 reg = <0>;
139 led-sources = <0 1>; 112 led-sources = <0 1>;
140 label = "lcd-backlight 113 label = "lcd-backlight";
141 default-brightness = < 114 default-brightness = <80>;
142 }; 115 };
143 }; 116 };
144 117
145 led-controller@68 { 118 led-controller@68 {
146 compatible = "si-en,sn3193"; 119 compatible = "si-en,sn3193";
147 reg = <0x68>; 120 reg = <0x68>;
148 121
149 shutdown-gpios = <&tlmm 45 GPI 122 shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
150 123
151 #address-cells = <1>; 124 #address-cells = <1>;
152 #size-cells = <0>; 125 #size-cells = <0>;
153 126
154 led@1 { 127 led@1 {
155 reg = <1>; 128 reg = <1>;
156 label = "red:status"; 129 label = "red:status";
157 led-max-microamp = <17 130 led-max-microamp = <17500>;
158 }; 131 };
159 132
160 led@2 { 133 led@2 {
161 reg = <2>; 134 reg = <2>;
162 label = "green:status" 135 label = "green:status";
163 led-max-microamp = <17 136 led-max-microamp = <17500>;
164 }; 137 };
165 138
166 led@3 { 139 led@3 {
167 reg = <3>; 140 reg = <3>;
168 label = "blue:status"; 141 label = "blue:status";
169 led-max-microamp = <17 142 led-max-microamp = <17500>;
170 }; 143 };
171 }; 144 };
172 }; 145 };
173 146
174 &blsp1_i2c6 { 147 &blsp1_i2c6 {
175 status = "okay"; 148 status = "okay";
176 149
177 bq24196_charger: charger@6b { 150 bq24196_charger: charger@6b {
178 compatible = "ti,bq24196"; 151 compatible = "ti,bq24196";
179 reg = <0x6b>; 152 reg = <0x6b>;
180 interrupts-extended = <&tlmm 3 153 interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
181 omit-battery-class; 154 omit-battery-class;
182 }; 155 };
183 }; 156 };
184 157
185 &blsp1_uart2 { 158 &blsp1_uart2 {
186 status = "okay"; 159 status = "okay";
187 }; 160 };
188 161
189 &gcc { 162 &gcc {
190 compatible = "qcom,gcc-msm8974pro-ac"; 163 compatible = "qcom,gcc-msm8974pro-ac";
191 }; 164 };
192 165
193 &pm8941_coincell { 166 &pm8941_coincell {
194 qcom,rset-ohms = <800>; 167 qcom,rset-ohms = <800>;
195 qcom,vset-millivolts = <3200>; 168 qcom,vset-millivolts = <3200>;
196 169
197 status = "okay"; 170 status = "okay";
198 }; 171 };
199 172
200 &pm8941_gpios { 173 &pm8941_gpios {
201 gpio_keys_default: gpio-keys-active-st 174 gpio_keys_default: gpio-keys-active-state {
202 pins = "gpio2", "gpio5"; 175 pins = "gpio2", "gpio5";
203 function = "normal"; 176 function = "normal";
204 input-enable; 177 input-enable;
205 bias-disable; 178 bias-disable;
206 power-source = <PM8941_GPIO_S3 179 power-source = <PM8941_GPIO_S3>;
207 }; 180 };
208 }; 181 };
209 182
210 &pm8941_vib { 183 &pm8941_vib {
211 status = "okay"; 184 status = "okay";
212 }; 185 };
213 186
214 &pronto { 187 &pronto {
215 vddmx-supply = <&pm8841_s1>; 188 vddmx-supply = <&pm8841_s1>;
216 vddcx-supply = <&pm8841_s2>; 189 vddcx-supply = <&pm8841_s2>;
217 vddpx-supply = <&pm8941_s3>; 190 vddpx-supply = <&pm8941_s3>;
218 191
219 pinctrl-names = "default"; 192 pinctrl-names = "default";
220 pinctrl-0 = <&wcnss_pin_a>; 193 pinctrl-0 = <&wcnss_pin_a>;
221 194
222 status = "okay"; 195 status = "okay";
223 196
224 iris { 197 iris {
225 vddxo-supply = <&pm8941_l6>; 198 vddxo-supply = <&pm8941_l6>;
226 vddrfa-supply = <&pm8941_l11>; 199 vddrfa-supply = <&pm8941_l11>;
227 vddpa-supply = <&pm8941_l19>; 200 vddpa-supply = <&pm8941_l19>;
228 vdddig-supply = <&pm8941_s3>; 201 vdddig-supply = <&pm8941_s3>;
229 }; 202 };
230 203
231 smd-edge { 204 smd-edge {
232 qcom,remote-pid = <4>; 205 qcom,remote-pid = <4>;
233 label = "pronto"; 206 label = "pronto";
234 207
235 wcnss { 208 wcnss {
236 status = "okay"; 209 status = "okay";
237 }; 210 };
238 }; 211 };
239 }; 212 };
240 213
241 &remoteproc_adsp { 214 &remoteproc_adsp {
242 cx-supply = <&pm8841_s2>; 215 cx-supply = <&pm8841_s2>;
243 216
244 status = "okay"; 217 status = "okay";
245 }; 218 };
246 219
247 &rpm_requests { 220 &rpm_requests {
248 regulators-0 { 221 regulators-0 {
249 compatible = "qcom,rpm-pm8841- 222 compatible = "qcom,rpm-pm8841-regulators";
250 223
251 pm8841_s1: s1 { 224 pm8841_s1: s1 {
252 regulator-min-microvol 225 regulator-min-microvolt = <675000>;
253 regulator-max-microvol 226 regulator-max-microvolt = <1050000>;
254 }; 227 };
255 228
256 pm8841_s2: s2 { 229 pm8841_s2: s2 {
257 regulator-min-microvol 230 regulator-min-microvolt = <875000>;
258 regulator-max-microvol 231 regulator-max-microvolt = <1050000>;
259 regulator-always-on; 232 regulator-always-on;
260 }; 233 };
261 234
262 pm8841_s3: s3 { 235 pm8841_s3: s3 {
263 regulator-min-microvol 236 regulator-min-microvolt = <1050000>;
264 regulator-max-microvol 237 regulator-max-microvolt = <1050000>;
265 }; 238 };
266 }; 239 };
267 240
268 regulators-1 { 241 regulators-1 {
269 compatible = "qcom,rpm-pm8941- 242 compatible = "qcom,rpm-pm8941-regulators";
270 243
271 vdd_l1_l3-supply = <&pm8941_s1 244 vdd_l1_l3-supply = <&pm8941_s1>;
272 vdd_l2_lvs1_2_3-supply = <&pm8 245 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
273 vdd_l4_l11-supply = <&pm8941_s 246 vdd_l4_l11-supply = <&pm8941_s1>;
274 vdd_l5_l7-supply = <&pm8941_s2 247 vdd_l5_l7-supply = <&pm8941_s2>;
275 vdd_l6_l12_l14_l15-supply = <& 248 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
276 vdd_l8_l16_l18_l19-supply = <& 249 vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
277 vdd_l9_l10_l17_l22-supply = <& 250 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
278 vdd_l13_l20_l23_l24-supply = < 251 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
279 vdd_l21-supply = <&vreg_boost> 252 vdd_l21-supply = <&vreg_boost>;
280 253
281 pm8941_s1: s1 { 254 pm8941_s1: s1 {
282 regulator-min-microvol 255 regulator-min-microvolt = <1300000>;
283 regulator-max-microvol 256 regulator-max-microvolt = <1300000>;
284 257
285 regulator-always-on; 258 regulator-always-on;
286 regulator-boot-on; 259 regulator-boot-on;
287 }; 260 };
288 261
289 pm8941_s2: s2 { 262 pm8941_s2: s2 {
290 regulator-min-microvol 263 regulator-min-microvolt = <2150000>;
291 regulator-max-microvol 264 regulator-max-microvolt = <2150000>;
292 265
293 regulator-boot-on; 266 regulator-boot-on;
294 }; 267 };
295 268
296 pm8941_s3: s3 { 269 pm8941_s3: s3 {
297 regulator-min-microvol 270 regulator-min-microvolt = <1800000>;
298 regulator-max-microvol 271 regulator-max-microvolt = <1800000>;
299 regulator-system-load 272 regulator-system-load = <154000>;
300 273
301 regulator-always-on; 274 regulator-always-on;
302 regulator-boot-on; 275 regulator-boot-on;
303 regulator-allow-set-lo 276 regulator-allow-set-load;
304 }; 277 };
305 278
306 pm8941_l1: l1 { 279 pm8941_l1: l1 {
307 regulator-min-microvol 280 regulator-min-microvolt = <1225000>;
308 regulator-max-microvol 281 regulator-max-microvolt = <1225000>;
309 282
310 regulator-always-on; 283 regulator-always-on;
311 regulator-boot-on; 284 regulator-boot-on;
312 }; 285 };
313 286
314 pm8941_l2: l2 { 287 pm8941_l2: l2 {
315 regulator-min-microvol 288 regulator-min-microvolt = <1200000>;
316 regulator-max-microvol 289 regulator-max-microvolt = <1200000>;
317 }; 290 };
318 291
319 pm8941_l3: l3 { 292 pm8941_l3: l3 {
320 regulator-min-microvol 293 regulator-min-microvolt = <1225000>;
321 regulator-max-microvol 294 regulator-max-microvolt = <1225000>;
322 }; 295 };
323 296
324 pm8941_l4: l4 { 297 pm8941_l4: l4 {
325 regulator-min-microvol 298 regulator-min-microvolt = <1225000>;
326 regulator-max-microvol 299 regulator-max-microvolt = <1225000>;
327 }; 300 };
328 301
329 pm8941_l5: l5 { 302 pm8941_l5: l5 {
330 regulator-min-microvol 303 regulator-min-microvolt = <1800000>;
331 regulator-max-microvol 304 regulator-max-microvolt = <1800000>;
332 }; 305 };
333 306
334 pm8941_l6: l6 { 307 pm8941_l6: l6 {
335 regulator-min-microvol 308 regulator-min-microvolt = <1800000>;
336 regulator-max-microvol 309 regulator-max-microvolt = <1800000>;
337 310
338 regulator-boot-on; 311 regulator-boot-on;
339 }; 312 };
340 313
341 pm8941_l7: l7 { 314 pm8941_l7: l7 {
342 regulator-min-microvol 315 regulator-min-microvolt = <1800000>;
343 regulator-max-microvol 316 regulator-max-microvolt = <1800000>;
344 317
345 regulator-boot-on; 318 regulator-boot-on;
346 }; 319 };
347 320
348 pm8941_l8: l8 { 321 pm8941_l8: l8 {
349 regulator-min-microvol 322 regulator-min-microvolt = <1800000>;
350 regulator-max-microvol 323 regulator-max-microvolt = <1800000>;
351 }; 324 };
352 325
353 pm8941_l9: l9 { 326 pm8941_l9: l9 {
354 regulator-min-microvol 327 regulator-min-microvolt = <1800000>;
355 regulator-max-microvol 328 regulator-max-microvolt = <2950000>;
356 }; 329 };
357 330
358 pm8941_l10: l10 { 331 pm8941_l10: l10 {
359 regulator-min-microvol 332 regulator-min-microvolt = <1800000>;
360 regulator-max-microvol 333 regulator-max-microvolt = <2950000>;
361 }; 334 };
362 335
363 pm8941_l11: l11 { 336 pm8941_l11: l11 {
364 regulator-min-microvol 337 regulator-min-microvolt = <1225000>;
365 regulator-max-microvol 338 regulator-max-microvolt = <1350000>;
366 }; 339 };
367 340
368 pm8941_l12: l12 { 341 pm8941_l12: l12 {
369 regulator-min-microvol 342 regulator-min-microvolt = <1800000>;
370 regulator-max-microvol 343 regulator-max-microvolt = <1800000>;
371 344
372 regulator-always-on; 345 regulator-always-on;
373 regulator-boot-on; 346 regulator-boot-on;
374 regulator-allow-set-lo 347 regulator-allow-set-load;
375 }; 348 };
376 349
377 pm8941_l13: l13 { 350 pm8941_l13: l13 {
378 regulator-min-microvol 351 regulator-min-microvolt = <1800000>;
379 regulator-max-microvol 352 regulator-max-microvolt = <2950000>;
380 353
381 regulator-boot-on; 354 regulator-boot-on;
382 }; 355 };
383 356
384 pm8941_l14: l14 { 357 pm8941_l14: l14 {
385 regulator-min-microvol 358 regulator-min-microvolt = <1800000>;
386 regulator-max-microvol 359 regulator-max-microvolt = <1800000>;
387 }; 360 };
388 361
389 pm8941_l15: l15 { 362 pm8941_l15: l15 {
390 regulator-min-microvol 363 regulator-min-microvolt = <2050000>;
391 regulator-max-microvol 364 regulator-max-microvolt = <2050000>;
392 }; 365 };
393 366
394 pm8941_l16: l16 { 367 pm8941_l16: l16 {
395 regulator-min-microvol 368 regulator-min-microvolt = <2700000>;
396 regulator-max-microvol 369 regulator-max-microvolt = <2700000>;
397 }; 370 };
398 371
399 pm8941_l17: l17 { 372 pm8941_l17: l17 {
400 regulator-min-microvol 373 regulator-min-microvolt = <2850000>;
401 regulator-max-microvol 374 regulator-max-microvolt = <2850000>;
402 }; 375 };
403 376
404 pm8941_l18: l18 { 377 pm8941_l18: l18 {
405 regulator-min-microvol 378 regulator-min-microvolt = <2850000>;
406 regulator-max-microvol 379 regulator-max-microvolt = <2850000>;
407 }; 380 };
408 381
409 pm8941_l19: l19 { 382 pm8941_l19: l19 {
410 regulator-min-microvol 383 regulator-min-microvolt = <2900000>;
411 regulator-max-microvol 384 regulator-max-microvolt = <3350000>;
412 }; 385 };
413 386
414 pm8941_l20: l20 { 387 pm8941_l20: l20 {
415 regulator-min-microvol 388 regulator-min-microvolt = <2950000>;
416 regulator-max-microvol 389 regulator-max-microvolt = <2950000>;
417 390
418 regulator-system-load 391 regulator-system-load = <200000>;
419 regulator-allow-set-lo 392 regulator-allow-set-load;
420 regulator-boot-on; 393 regulator-boot-on;
421 }; 394 };
422 395
423 pm8941_l21: l21 { 396 pm8941_l21: l21 {
424 regulator-min-microvol 397 regulator-min-microvolt = <2950000>;
425 regulator-max-microvol 398 regulator-max-microvolt = <2950000>;
426 399
427 regulator-boot-on; 400 regulator-boot-on;
428 }; 401 };
429 402
430 pm8941_l22: l22 { 403 pm8941_l22: l22 {
431 regulator-min-microvol 404 regulator-min-microvolt = <3000000>;
432 regulator-max-microvol 405 regulator-max-microvolt = <3000000>;
433 regulator-allow-set-lo 406 regulator-allow-set-load;
434 }; 407 };
435 408
436 pm8941_l23: l23 { 409 pm8941_l23: l23 {
437 regulator-min-microvol 410 regulator-min-microvolt = <3000000>;
438 regulator-max-microvol 411 regulator-max-microvolt = <3000000>;
439 }; 412 };
440 413
441 pm8941_l24: l24 { 414 pm8941_l24: l24 {
442 regulator-min-microvol 415 regulator-min-microvolt = <3075000>;
443 regulator-max-microvol 416 regulator-max-microvolt = <3075000>;
444 417
445 regulator-boot-on; 418 regulator-boot-on;
446 }; 419 };
447 420
448 pm8941_lvs3: lvs3 {}; 421 pm8941_lvs3: lvs3 {};
449 }; 422 };
450 }; 423 };
451 424
452 &sdhc_1 { 425 &sdhc_1 {
453 vmmc-supply = <&pm8941_l20>; 426 vmmc-supply = <&pm8941_l20>;
454 vqmmc-supply = <&pm8941_s3>; 427 vqmmc-supply = <&pm8941_s3>;
455 428
456 pinctrl-names = "default", "sleep"; 429 pinctrl-names = "default", "sleep";
457 pinctrl-0 = <&sdc1_on>; 430 pinctrl-0 = <&sdc1_on>;
458 pinctrl-1 = <&sdc1_off>; 431 pinctrl-1 = <&sdc1_off>;
459 432
460 status = "okay"; <<
461 }; <<
462 <<
463 &smbb { <<
464 status = "okay"; 433 status = "okay";
465 }; 434 };
466 435
467 &tlmm { 436 &tlmm {
468 gpio_hall_sensor_default: gpio-hall-se 437 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
469 pins = "gpio68"; 438 pins = "gpio68";
470 function = "gpio"; 439 function = "gpio";
471 drive-strength = <8>; 440 drive-strength = <8>;
472 bias-pull-up; 441 bias-pull-up;
473 }; 442 };
474 443
475 sdc1_on: sdc1-on-state { 444 sdc1_on: sdc1-on-state {
476 clk-pins { 445 clk-pins {
477 pins = "sdc1_clk"; 446 pins = "sdc1_clk";
478 drive-strength = <4>; 447 drive-strength = <4>;
479 bias-disable; 448 bias-disable;
480 }; 449 };
481 450
482 cmd-data-pins { 451 cmd-data-pins {
483 pins = "sdc1_cmd", "sd 452 pins = "sdc1_cmd", "sdc1_data";
484 drive-strength = <4>; 453 drive-strength = <4>;
485 bias-pull-up; 454 bias-pull-up;
486 }; 455 };
487 }; 456 };
488 457
489 touch_default_state: touch-default-sta 458 touch_default_state: touch-default-state {
490 int-pins { 459 int-pins {
491 pins = "gpio61"; 460 pins = "gpio61";
492 function = "gpio"; 461 function = "gpio";
493 drive-strength = <2>; 462 drive-strength = <2>;
494 bias-disable; 463 bias-disable;
495 }; 464 };
496 465
497 reset-pins { 466 reset-pins {
498 pins = "gpio60"; 467 pins = "gpio60";
499 function = "gpio"; 468 function = "gpio";
500 drive-strength = <2>; 469 drive-strength = <2>;
501 bias-pull-up; 470 bias-pull-up;
502 }; 471 };
503 }; 472 };
504 473
505 wcnss_pin_a: wcnss-pin-active-state { 474 wcnss_pin_a: wcnss-pin-active-state {
506 wlan-pins { 475 wlan-pins {
507 pins = "gpio36", "gpio 476 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
508 function = "wlan"; 477 function = "wlan";
509 drive-strength = <6>; 478 drive-strength = <6>;
510 bias-pull-down; 479 bias-pull-down;
511 }; 480 };
512 481
513 bt-pins { 482 bt-pins {
514 pins = "gpio35", "gpio 483 pins = "gpio35", "gpio43", "gpio44";
515 function = "bt"; 484 function = "bt";
516 drive-strength = <2>; 485 drive-strength = <2>;
517 bias-pull-down; 486 bias-pull-down;
518 }; 487 };
519 }; 488 };
520 }; 489 };
521 490
522 &usb { 491 &usb {
523 phys = <&usb_hs1_phy>; 492 phys = <&usb_hs1_phy>;
524 phy-select = <&tcsr 0xb000 0>; 493 phy-select = <&tcsr 0xb000 0>;
525 extcon = <&smbb>, <&usb_id>; 494 extcon = <&smbb>, <&usb_id>;
526 vbus-supply = <&chg_otg>; 495 vbus-supply = <&chg_otg>;
527 496
528 hnp-disable; 497 hnp-disable;
529 srp-disable; 498 srp-disable;
530 adp-disable; 499 adp-disable;
531 500
532 status = "okay"; 501 status = "okay";
533 }; 502 };
534 503
535 &usb_hs1_phy { 504 &usb_hs1_phy {
536 status = "okay"; 505 status = "okay";
537 506
538 v1p8-supply = <&pm8941_l6>; 507 v1p8-supply = <&pm8941_l6>;
539 v3p3-supply = <&pm8941_l24>; 508 v3p3-supply = <&pm8941_l24>;
540 509
541 extcon = <&smbb>; 510 extcon = <&smbb>;
542 qcom,init-seq = /bits/ 8 <0x1 0x64>; 511 qcom,init-seq = /bits/ 8 <0x1 0x64>;
543 }; 512 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.