1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974pro.dtsi" 2 #include "qcom-msm8974pro.dtsi"
3 #include "pm8841.dtsi" 3 #include "pm8841.dtsi"
4 #include "pm8941.dtsi" 4 #include "pm8941.dtsi"
5 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 7
8 / { 8 / {
9 model = "OnePlus One"; 9 model = "OnePlus One";
10 compatible = "oneplus,bacon", "qcom,ms 10 compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
11 chassis-type = "handset"; 11 chassis-type = "handset";
12 qcom,msm-id = <194 0x10000>; 12 qcom,msm-id = <194 0x10000>;
13 qcom,board-id = <8 0>; 13 qcom,board-id = <8 0>;
14 14
15 aliases { 15 aliases {
16 serial0 = &blsp1_uart2; 16 serial0 = &blsp1_uart2;
17 }; 17 };
18 18
19 chosen { 19 chosen {
20 stdout-path = "serial0:115200n 20 stdout-path = "serial0:115200n8";
21 }; 21 };
22 22
23 gpio-keys { 23 gpio-keys {
24 compatible = "gpio-keys"; 24 compatible = "gpio-keys";
25 25
26 pinctrl-0 = <&gpio_keys_defaul 26 pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
27 pinctrl-names = "default"; 27 pinctrl-names = "default";
28 28
29 key-volume-down { 29 key-volume-down {
30 label = "Volume Down"; 30 label = "Volume Down";
31 gpios = <&pm8941_gpios 31 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_VOLU 32 linux,code = <KEY_VOLUMEDOWN>;
33 wakeup-source; 33 wakeup-source;
34 debounce-interval = <1 34 debounce-interval = <15>;
35 }; 35 };
36 36
37 key-volume-up { 37 key-volume-up {
38 label = "Volume Up"; 38 label = "Volume Up";
39 gpios = <&pm8941_gpios 39 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_VOLU 40 linux,code = <KEY_VOLUMEUP>;
41 wakeup-source; 41 wakeup-source;
42 debounce-interval = <1 42 debounce-interval = <15>;
43 }; 43 };
44 44
45 event-hall-sensor { 45 event-hall-sensor {
46 label = "Hall Effect S 46 label = "Hall Effect Sensor";
47 gpios = <&tlmm 68 GPIO 47 gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
48 linux,input-type = <EV 48 linux,input-type = <EV_SW>;
49 linux,code = <SW_LID>; 49 linux,code = <SW_LID>;
50 linux,can-disable; 50 linux,can-disable;
51 debounce-interval = <1 51 debounce-interval = <150>;
52 }; 52 };
53 }; 53 };
54 54
55 vreg_boost: vreg-boost { 55 vreg_boost: vreg-boost {
56 compatible = "regulator-fixed" 56 compatible = "regulator-fixed";
57 57
58 regulator-name = "vreg-boost"; 58 regulator-name = "vreg-boost";
59 regulator-min-microvolt = <315 59 regulator-min-microvolt = <3150000>;
60 regulator-max-microvolt = <315 60 regulator-max-microvolt = <3150000>;
61 61
62 regulator-always-on; 62 regulator-always-on;
63 regulator-boot-on; 63 regulator-boot-on;
64 64
65 gpio = <&pm8941_gpios 21 GPIO_ 65 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
66 enable-active-high; 66 enable-active-high;
67 67
68 pinctrl-names = "default"; 68 pinctrl-names = "default";
69 pinctrl-0 = <&boost_bypass_n_p 69 pinctrl-0 = <&boost_bypass_n_pin>;
70 }; 70 };
71 71
72 vreg_vph_pwr: vreg-vph-pwr { 72 vreg_vph_pwr: vreg-vph-pwr {
73 compatible = "regulator-fixed" 73 compatible = "regulator-fixed";
74 regulator-name = "vph-pwr"; 74 regulator-name = "vph-pwr";
75 75
76 regulator-min-microvolt = <360 76 regulator-min-microvolt = <3600000>;
77 regulator-max-microvolt = <360 77 regulator-max-microvolt = <3600000>;
78 78
79 regulator-always-on; 79 regulator-always-on;
80 }; 80 };
81 }; 81 };
82 82
83 &blsp1_i2c1 { 83 &blsp1_i2c1 {
84 status = "okay"; 84 status = "okay";
85 85
86 fuel-gauge@55 { 86 fuel-gauge@55 {
87 compatible = "ti,bq27541"; 87 compatible = "ti,bq27541";
88 reg = <0x55>; 88 reg = <0x55>;
89 power-supplies = <&bq24196_cha 89 power-supplies = <&bq24196_charger>;
90 }; 90 };
91 }; 91 };
92 92
93 &blsp1_i2c2 { 93 &blsp1_i2c2 {
94 status = "okay"; 94 status = "okay";
95 95
96 rmi4-i2c-dev@20 { 96 rmi4-i2c-dev@20 {
97 compatible = "syna,rmi4-i2c"; 97 compatible = "syna,rmi4-i2c";
98 reg = <0x20>; 98 reg = <0x20>;
99 99
100 syna,startup-delay-ms = <100>; 100 syna,startup-delay-ms = <100>;
101 101
102 interrupts-extended = <&tlmm 6 102 interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
103 vdd-supply = <&pm8941_l22>; 103 vdd-supply = <&pm8941_l22>;
104 vio-supply = <&pm8941_lvs3>; 104 vio-supply = <&pm8941_lvs3>;
105 105
106 pinctrl-names = "default"; 106 pinctrl-names = "default";
107 pinctrl-0 = <&touch_default_st 107 pinctrl-0 = <&touch_default_state>;
108 108
109 #address-cells = <1>; 109 #address-cells = <1>;
110 #size-cells = <0>; 110 #size-cells = <0>;
111 111
112 rmi4-f01@1 { 112 rmi4-f01@1 {
113 reg = <0x1>; 113 reg = <0x1>;
114 syna,nosleep-mode = <1 114 syna,nosleep-mode = <1>;
115 }; 115 };
116 116
117 rmi4-f12@12 { 117 rmi4-f12@12 {
118 reg = <0x12>; 118 reg = <0x12>;
119 syna,sensor-type = <1> 119 syna,sensor-type = <1>;
120 /* 120 /*
121 * Touchscreen size is 121 * Touchscreen size is 2040x1080, y-values between
122 * 1920-2040 are used 122 * 1920-2040 are used for touchkey (menu, home & back).
123 * For now clip it off 123 * For now clip it off so we don't get touch events
124 * outside of the disp 124 * outside of the display area.
125 */ 125 */
126 syna,clip-y-high = <19 126 syna,clip-y-high = <1920>;
127 }; 127 };
128 }; 128 };
129 129
130 led-controller@36 { 130 led-controller@36 {
131 compatible = "ti,lm3630a"; 131 compatible = "ti,lm3630a";
132 reg = <0x36>; 132 reg = <0x36>;
133 133
134 #address-cells = <1>; 134 #address-cells = <1>;
135 #size-cells = <0>; 135 #size-cells = <0>;
136 136
137 led@0 { 137 led@0 {
138 reg = <0>; 138 reg = <0>;
139 led-sources = <0 1>; 139 led-sources = <0 1>;
140 label = "lcd-backlight 140 label = "lcd-backlight";
141 default-brightness = < 141 default-brightness = <80>;
142 }; 142 };
143 }; 143 };
144 144
145 led-controller@68 { 145 led-controller@68 {
146 compatible = "si-en,sn3193"; 146 compatible = "si-en,sn3193";
147 reg = <0x68>; 147 reg = <0x68>;
148 148
149 shutdown-gpios = <&tlmm 45 GPI 149 shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
150 150
151 #address-cells = <1>; 151 #address-cells = <1>;
152 #size-cells = <0>; 152 #size-cells = <0>;
153 153
154 led@1 { 154 led@1 {
155 reg = <1>; 155 reg = <1>;
156 label = "red:status"; 156 label = "red:status";
157 led-max-microamp = <17 157 led-max-microamp = <17500>;
158 }; 158 };
159 159
160 led@2 { 160 led@2 {
161 reg = <2>; 161 reg = <2>;
162 label = "green:status" 162 label = "green:status";
163 led-max-microamp = <17 163 led-max-microamp = <17500>;
164 }; 164 };
165 165
166 led@3 { 166 led@3 {
167 reg = <3>; 167 reg = <3>;
168 label = "blue:status"; 168 label = "blue:status";
169 led-max-microamp = <17 169 led-max-microamp = <17500>;
170 }; 170 };
171 }; 171 };
172 }; 172 };
173 173
174 &blsp1_i2c6 { 174 &blsp1_i2c6 {
175 status = "okay"; 175 status = "okay";
176 176
177 bq24196_charger: charger@6b { 177 bq24196_charger: charger@6b {
178 compatible = "ti,bq24196"; 178 compatible = "ti,bq24196";
179 reg = <0x6b>; 179 reg = <0x6b>;
180 interrupts-extended = <&tlmm 3 180 interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
181 omit-battery-class; 181 omit-battery-class;
182 }; 182 };
183 }; 183 };
184 184
185 &blsp1_uart2 { 185 &blsp1_uart2 {
186 status = "okay"; 186 status = "okay";
187 }; 187 };
188 188
189 &gcc { 189 &gcc {
190 compatible = "qcom,gcc-msm8974pro-ac"; 190 compatible = "qcom,gcc-msm8974pro-ac";
191 }; 191 };
192 192
193 &pm8941_coincell { 193 &pm8941_coincell {
194 qcom,rset-ohms = <800>; 194 qcom,rset-ohms = <800>;
195 qcom,vset-millivolts = <3200>; 195 qcom,vset-millivolts = <3200>;
196 196
197 status = "okay"; 197 status = "okay";
198 }; 198 };
199 199
200 &pm8941_gpios { 200 &pm8941_gpios {
201 gpio_keys_default: gpio-keys-active-st 201 gpio_keys_default: gpio-keys-active-state {
202 pins = "gpio2", "gpio5"; 202 pins = "gpio2", "gpio5";
203 function = "normal"; 203 function = "normal";
204 input-enable; 204 input-enable;
205 bias-disable; 205 bias-disable;
206 power-source = <PM8941_GPIO_S3 206 power-source = <PM8941_GPIO_S3>;
207 }; 207 };
208 }; 208 };
209 209
210 &pm8941_vib { 210 &pm8941_vib {
211 status = "okay"; 211 status = "okay";
212 }; 212 };
213 213
214 &pronto { 214 &pronto {
215 vddmx-supply = <&pm8841_s1>; 215 vddmx-supply = <&pm8841_s1>;
216 vddcx-supply = <&pm8841_s2>; 216 vddcx-supply = <&pm8841_s2>;
217 vddpx-supply = <&pm8941_s3>; 217 vddpx-supply = <&pm8941_s3>;
218 218
219 pinctrl-names = "default"; 219 pinctrl-names = "default";
220 pinctrl-0 = <&wcnss_pin_a>; 220 pinctrl-0 = <&wcnss_pin_a>;
221 221
222 status = "okay"; 222 status = "okay";
223 223
224 iris { 224 iris {
225 vddxo-supply = <&pm8941_l6>; 225 vddxo-supply = <&pm8941_l6>;
226 vddrfa-supply = <&pm8941_l11>; 226 vddrfa-supply = <&pm8941_l11>;
227 vddpa-supply = <&pm8941_l19>; 227 vddpa-supply = <&pm8941_l19>;
228 vdddig-supply = <&pm8941_s3>; 228 vdddig-supply = <&pm8941_s3>;
229 }; 229 };
230 230
231 smd-edge { 231 smd-edge {
232 qcom,remote-pid = <4>; 232 qcom,remote-pid = <4>;
233 label = "pronto"; 233 label = "pronto";
234 234
235 wcnss { 235 wcnss {
236 status = "okay"; 236 status = "okay";
237 }; 237 };
238 }; 238 };
239 }; 239 };
240 240
241 &remoteproc_adsp { 241 &remoteproc_adsp {
242 cx-supply = <&pm8841_s2>; 242 cx-supply = <&pm8841_s2>;
243 243
244 status = "okay"; 244 status = "okay";
245 }; 245 };
246 246
247 &rpm_requests { 247 &rpm_requests {
248 regulators-0 { 248 regulators-0 {
249 compatible = "qcom,rpm-pm8841- 249 compatible = "qcom,rpm-pm8841-regulators";
250 250
251 pm8841_s1: s1 { 251 pm8841_s1: s1 {
252 regulator-min-microvol 252 regulator-min-microvolt = <675000>;
253 regulator-max-microvol 253 regulator-max-microvolt = <1050000>;
254 }; 254 };
255 255
256 pm8841_s2: s2 { 256 pm8841_s2: s2 {
257 regulator-min-microvol 257 regulator-min-microvolt = <875000>;
258 regulator-max-microvol 258 regulator-max-microvolt = <1050000>;
259 regulator-always-on; 259 regulator-always-on;
260 }; 260 };
261 261
262 pm8841_s3: s3 { 262 pm8841_s3: s3 {
263 regulator-min-microvol 263 regulator-min-microvolt = <1050000>;
264 regulator-max-microvol 264 regulator-max-microvolt = <1050000>;
265 }; 265 };
266 }; 266 };
267 267
268 regulators-1 { 268 regulators-1 {
269 compatible = "qcom,rpm-pm8941- 269 compatible = "qcom,rpm-pm8941-regulators";
270 270
271 vdd_l1_l3-supply = <&pm8941_s1 271 vdd_l1_l3-supply = <&pm8941_s1>;
272 vdd_l2_lvs1_2_3-supply = <&pm8 272 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
273 vdd_l4_l11-supply = <&pm8941_s 273 vdd_l4_l11-supply = <&pm8941_s1>;
274 vdd_l5_l7-supply = <&pm8941_s2 274 vdd_l5_l7-supply = <&pm8941_s2>;
275 vdd_l6_l12_l14_l15-supply = <& 275 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
276 vdd_l8_l16_l18_l19-supply = <& 276 vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
277 vdd_l9_l10_l17_l22-supply = <& 277 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
278 vdd_l13_l20_l23_l24-supply = < 278 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
279 vdd_l21-supply = <&vreg_boost> 279 vdd_l21-supply = <&vreg_boost>;
280 280
281 pm8941_s1: s1 { 281 pm8941_s1: s1 {
282 regulator-min-microvol 282 regulator-min-microvolt = <1300000>;
283 regulator-max-microvol 283 regulator-max-microvolt = <1300000>;
284 284
285 regulator-always-on; 285 regulator-always-on;
286 regulator-boot-on; 286 regulator-boot-on;
287 }; 287 };
288 288
289 pm8941_s2: s2 { 289 pm8941_s2: s2 {
290 regulator-min-microvol 290 regulator-min-microvolt = <2150000>;
291 regulator-max-microvol 291 regulator-max-microvolt = <2150000>;
292 292
293 regulator-boot-on; 293 regulator-boot-on;
294 }; 294 };
295 295
296 pm8941_s3: s3 { 296 pm8941_s3: s3 {
297 regulator-min-microvol 297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvol 298 regulator-max-microvolt = <1800000>;
299 regulator-system-load 299 regulator-system-load = <154000>;
300 300
301 regulator-always-on; 301 regulator-always-on;
302 regulator-boot-on; 302 regulator-boot-on;
303 regulator-allow-set-lo 303 regulator-allow-set-load;
304 }; 304 };
305 305
306 pm8941_l1: l1 { 306 pm8941_l1: l1 {
307 regulator-min-microvol 307 regulator-min-microvolt = <1225000>;
308 regulator-max-microvol 308 regulator-max-microvolt = <1225000>;
309 309
310 regulator-always-on; 310 regulator-always-on;
311 regulator-boot-on; 311 regulator-boot-on;
312 }; 312 };
313 313
314 pm8941_l2: l2 { 314 pm8941_l2: l2 {
315 regulator-min-microvol 315 regulator-min-microvolt = <1200000>;
316 regulator-max-microvol 316 regulator-max-microvolt = <1200000>;
317 }; 317 };
318 318
319 pm8941_l3: l3 { 319 pm8941_l3: l3 {
320 regulator-min-microvol 320 regulator-min-microvolt = <1225000>;
321 regulator-max-microvol 321 regulator-max-microvolt = <1225000>;
322 }; 322 };
323 323
324 pm8941_l4: l4 { 324 pm8941_l4: l4 {
325 regulator-min-microvol 325 regulator-min-microvolt = <1225000>;
326 regulator-max-microvol 326 regulator-max-microvolt = <1225000>;
327 }; 327 };
328 328
329 pm8941_l5: l5 { 329 pm8941_l5: l5 {
330 regulator-min-microvol 330 regulator-min-microvolt = <1800000>;
331 regulator-max-microvol 331 regulator-max-microvolt = <1800000>;
332 }; 332 };
333 333
334 pm8941_l6: l6 { 334 pm8941_l6: l6 {
335 regulator-min-microvol 335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvol 336 regulator-max-microvolt = <1800000>;
337 337
338 regulator-boot-on; 338 regulator-boot-on;
339 }; 339 };
340 340
341 pm8941_l7: l7 { 341 pm8941_l7: l7 {
342 regulator-min-microvol 342 regulator-min-microvolt = <1800000>;
343 regulator-max-microvol 343 regulator-max-microvolt = <1800000>;
344 344
345 regulator-boot-on; 345 regulator-boot-on;
346 }; 346 };
347 347
348 pm8941_l8: l8 { 348 pm8941_l8: l8 {
349 regulator-min-microvol 349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvol 350 regulator-max-microvolt = <1800000>;
351 }; 351 };
352 352
353 pm8941_l9: l9 { 353 pm8941_l9: l9 {
354 regulator-min-microvol 354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvol 355 regulator-max-microvolt = <2950000>;
356 }; 356 };
357 357
358 pm8941_l10: l10 { 358 pm8941_l10: l10 {
359 regulator-min-microvol 359 regulator-min-microvolt = <1800000>;
360 regulator-max-microvol 360 regulator-max-microvolt = <2950000>;
361 }; 361 };
362 362
363 pm8941_l11: l11 { 363 pm8941_l11: l11 {
364 regulator-min-microvol 364 regulator-min-microvolt = <1225000>;
365 regulator-max-microvol 365 regulator-max-microvolt = <1350000>;
366 }; 366 };
367 367
368 pm8941_l12: l12 { 368 pm8941_l12: l12 {
369 regulator-min-microvol 369 regulator-min-microvolt = <1800000>;
370 regulator-max-microvol 370 regulator-max-microvolt = <1800000>;
371 371
372 regulator-always-on; 372 regulator-always-on;
373 regulator-boot-on; 373 regulator-boot-on;
374 regulator-allow-set-lo 374 regulator-allow-set-load;
375 }; 375 };
376 376
377 pm8941_l13: l13 { 377 pm8941_l13: l13 {
378 regulator-min-microvol 378 regulator-min-microvolt = <1800000>;
379 regulator-max-microvol 379 regulator-max-microvolt = <2950000>;
380 380
381 regulator-boot-on; 381 regulator-boot-on;
382 }; 382 };
383 383
384 pm8941_l14: l14 { 384 pm8941_l14: l14 {
385 regulator-min-microvol 385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvol 386 regulator-max-microvolt = <1800000>;
387 }; 387 };
388 388
389 pm8941_l15: l15 { 389 pm8941_l15: l15 {
390 regulator-min-microvol 390 regulator-min-microvolt = <2050000>;
391 regulator-max-microvol 391 regulator-max-microvolt = <2050000>;
392 }; 392 };
393 393
394 pm8941_l16: l16 { 394 pm8941_l16: l16 {
395 regulator-min-microvol 395 regulator-min-microvolt = <2700000>;
396 regulator-max-microvol 396 regulator-max-microvolt = <2700000>;
397 }; 397 };
398 398
399 pm8941_l17: l17 { 399 pm8941_l17: l17 {
400 regulator-min-microvol 400 regulator-min-microvolt = <2850000>;
401 regulator-max-microvol 401 regulator-max-microvolt = <2850000>;
402 }; 402 };
403 403
404 pm8941_l18: l18 { 404 pm8941_l18: l18 {
405 regulator-min-microvol 405 regulator-min-microvolt = <2850000>;
406 regulator-max-microvol 406 regulator-max-microvolt = <2850000>;
407 }; 407 };
408 408
409 pm8941_l19: l19 { 409 pm8941_l19: l19 {
410 regulator-min-microvol 410 regulator-min-microvolt = <2900000>;
411 regulator-max-microvol 411 regulator-max-microvolt = <3350000>;
412 }; 412 };
413 413
414 pm8941_l20: l20 { 414 pm8941_l20: l20 {
415 regulator-min-microvol 415 regulator-min-microvolt = <2950000>;
416 regulator-max-microvol 416 regulator-max-microvolt = <2950000>;
417 417
418 regulator-system-load 418 regulator-system-load = <200000>;
419 regulator-allow-set-lo 419 regulator-allow-set-load;
420 regulator-boot-on; 420 regulator-boot-on;
421 }; 421 };
422 422
423 pm8941_l21: l21 { 423 pm8941_l21: l21 {
424 regulator-min-microvol 424 regulator-min-microvolt = <2950000>;
425 regulator-max-microvol 425 regulator-max-microvolt = <2950000>;
426 426
427 regulator-boot-on; 427 regulator-boot-on;
428 }; 428 };
429 429
430 pm8941_l22: l22 { 430 pm8941_l22: l22 {
431 regulator-min-microvol 431 regulator-min-microvolt = <3000000>;
432 regulator-max-microvol 432 regulator-max-microvolt = <3000000>;
433 regulator-allow-set-lo 433 regulator-allow-set-load;
434 }; 434 };
435 435
436 pm8941_l23: l23 { 436 pm8941_l23: l23 {
437 regulator-min-microvol 437 regulator-min-microvolt = <3000000>;
438 regulator-max-microvol 438 regulator-max-microvolt = <3000000>;
439 }; 439 };
440 440
441 pm8941_l24: l24 { 441 pm8941_l24: l24 {
442 regulator-min-microvol 442 regulator-min-microvolt = <3075000>;
443 regulator-max-microvol 443 regulator-max-microvolt = <3075000>;
444 444
445 regulator-boot-on; 445 regulator-boot-on;
446 }; 446 };
447 447
448 pm8941_lvs3: lvs3 {}; 448 pm8941_lvs3: lvs3 {};
449 }; 449 };
450 }; 450 };
451 451
452 &sdhc_1 { 452 &sdhc_1 {
453 vmmc-supply = <&pm8941_l20>; 453 vmmc-supply = <&pm8941_l20>;
454 vqmmc-supply = <&pm8941_s3>; 454 vqmmc-supply = <&pm8941_s3>;
455 455
456 pinctrl-names = "default", "sleep"; 456 pinctrl-names = "default", "sleep";
457 pinctrl-0 = <&sdc1_on>; 457 pinctrl-0 = <&sdc1_on>;
458 pinctrl-1 = <&sdc1_off>; 458 pinctrl-1 = <&sdc1_off>;
459 459
460 status = "okay"; 460 status = "okay";
461 }; 461 };
462 462
463 &smbb { 463 &smbb {
464 status = "okay"; 464 status = "okay";
465 }; 465 };
466 466
467 &tlmm { 467 &tlmm {
468 gpio_hall_sensor_default: gpio-hall-se 468 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
469 pins = "gpio68"; 469 pins = "gpio68";
470 function = "gpio"; 470 function = "gpio";
471 drive-strength = <8>; 471 drive-strength = <8>;
472 bias-pull-up; 472 bias-pull-up;
473 }; 473 };
474 474
475 sdc1_on: sdc1-on-state { 475 sdc1_on: sdc1-on-state {
476 clk-pins { 476 clk-pins {
477 pins = "sdc1_clk"; 477 pins = "sdc1_clk";
478 drive-strength = <4>; 478 drive-strength = <4>;
479 bias-disable; 479 bias-disable;
480 }; 480 };
481 481
482 cmd-data-pins { 482 cmd-data-pins {
483 pins = "sdc1_cmd", "sd 483 pins = "sdc1_cmd", "sdc1_data";
484 drive-strength = <4>; 484 drive-strength = <4>;
485 bias-pull-up; 485 bias-pull-up;
486 }; 486 };
487 }; 487 };
488 488
489 touch_default_state: touch-default-sta 489 touch_default_state: touch-default-state {
490 int-pins { 490 int-pins {
491 pins = "gpio61"; 491 pins = "gpio61";
492 function = "gpio"; 492 function = "gpio";
493 drive-strength = <2>; 493 drive-strength = <2>;
494 bias-disable; 494 bias-disable;
495 }; 495 };
496 496
497 reset-pins { 497 reset-pins {
498 pins = "gpio60"; 498 pins = "gpio60";
499 function = "gpio"; 499 function = "gpio";
500 drive-strength = <2>; 500 drive-strength = <2>;
501 bias-pull-up; 501 bias-pull-up;
502 }; 502 };
503 }; 503 };
504 504
505 wcnss_pin_a: wcnss-pin-active-state { 505 wcnss_pin_a: wcnss-pin-active-state {
506 wlan-pins { 506 wlan-pins {
507 pins = "gpio36", "gpio 507 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
508 function = "wlan"; 508 function = "wlan";
509 drive-strength = <6>; 509 drive-strength = <6>;
510 bias-pull-down; 510 bias-pull-down;
511 }; 511 };
512 512
513 bt-pins { 513 bt-pins {
514 pins = "gpio35", "gpio 514 pins = "gpio35", "gpio43", "gpio44";
515 function = "bt"; 515 function = "bt";
516 drive-strength = <2>; 516 drive-strength = <2>;
517 bias-pull-down; 517 bias-pull-down;
518 }; 518 };
519 }; 519 };
520 }; 520 };
521 521
522 &usb { 522 &usb {
523 phys = <&usb_hs1_phy>; 523 phys = <&usb_hs1_phy>;
524 phy-select = <&tcsr 0xb000 0>; 524 phy-select = <&tcsr 0xb000 0>;
525 extcon = <&smbb>, <&usb_id>; 525 extcon = <&smbb>, <&usb_id>;
526 vbus-supply = <&chg_otg>; 526 vbus-supply = <&chg_otg>;
527 527
528 hnp-disable; 528 hnp-disable;
529 srp-disable; 529 srp-disable;
530 adp-disable; 530 adp-disable;
531 531
532 status = "okay"; 532 status = "okay";
533 }; 533 };
534 534
535 &usb_hs1_phy { 535 &usb_hs1_phy {
536 status = "okay"; 536 status = "okay";
537 537
538 v1p8-supply = <&pm8941_l6>; 538 v1p8-supply = <&pm8941_l6>;
539 v3p3-supply = <&pm8941_l24>; 539 v3p3-supply = <&pm8941_l24>;
540 540
541 extcon = <&smbb>; 541 extcon = <&smbb>;
542 qcom,init-seq = /bits/ 8 <0x1 0x64>; 542 qcom,init-seq = /bits/ 8 <0x1 0x64>;
543 }; 543 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.