1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the RZ/A1H RSK board
4 *
5 * Copyright (C) 2016 Renesas Electronics
6 */
7
8 /dts-v1/;
9 #include "r7s72100.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/pinctrl/r7s72100-pinctrl
13
14 / {
15 model = "RSKRZA1";
16 compatible = "renesas,rskrza1", "renes
17
18 aliases {
19 serial0 = &scif2;
20 };
21
22 chosen {
23 bootargs = "ignore_loglevel";
24 stdout-path = "serial0:115200n
25 };
26
27 memory@8000000 {
28 device_type = "memory";
29 reg = <0x08000000 0x02000000>;
30 };
31
32 flash@18000000 {
33 compatible = "mtd-rom";
34 reg = <0x18000000 0x08000000>;
35 clocks = <&mstp9_clks R7S72100
36 power-domains = <&cpg_clocks>;
37 bank-width = <4>;
38 device-width = <1>;
39 #address-cells = <1>;
40 #size-cells = <1>;
41
42 partitions {
43 compatible = "fixed-pa
44 #address-cells = <1>;
45 #size-cells = <1>;
46
47 partition@0 {
48 label = "uboot
49 reg = <0x00000
50 };
51
52 partition@80000 {
53 label = "uboot
54 reg = <0x00080
55 };
56
57 partition@c0000 {
58 label = "dt";
59 reg = <0x000c0
60 };
61
62 partition@100000 {
63 label = "kerne
64 reg = <0x00100
65 };
66
67 partition@400000 {
68 label = "rootf
69 reg = <0x00400
70 };
71 };
72 };
73
74 keyboard {
75 compatible = "gpio-keys";
76
77 pinctrl-names = "default";
78 pinctrl-0 = <&keyboard_pins>;
79
80 key-1 {
81 interrupt-parent = <&i
82 interrupts = <3 IRQ_TY
83 linux,code = <KEY_1>;
84 label = "SW1";
85 wakeup-source;
86 };
87
88 key-2 {
89 interrupt-parent = <&i
90 interrupts = <2 IRQ_TY
91 linux,code = <KEY_2>;
92 label = "SW2";
93 wakeup-source;
94 };
95
96 key-3 {
97 interrupt-parent = <&i
98 interrupts = <5 IRQ_TY
99 linux,code = <KEY_3>;
100 label = "SW3";
101 wakeup-source;
102 };
103 };
104
105 leds {
106 compatible = "gpio-leds";
107
108 led0 {
109 gpios = <&port7 1 GPIO
110 };
111
112 led1 {
113 gpios = <&io_expander1
114 };
115
116 led2 {
117 gpios = <&io_expander1
118 };
119
120 led3 {
121 gpios = <&io_expander1
122 };
123 };
124 };
125
126 &extal_clk {
127 clock-frequency = <13330000>;
128 };
129
130 &i2c3 {
131 pinctrl-names = "default";
132 pinctrl-0 = <&i2c3_pins>;
133 status = "okay";
134
135 clock-frequency = <400000>;
136
137 io_expander1: gpio@20 {
138 compatible = "onnn,cat9554";
139 reg = <0x20>;
140 gpio-controller;
141 #gpio-cells = <2>;
142 };
143
144 io_expander2: gpio@21 {
145 compatible = "onnn,cat9554";
146 reg = <0x21>;
147 gpio-controller;
148 #gpio-cells = <2>;
149 };
150
151 eeprom@50 {
152 compatible = "renesas,r1ex2401
153 reg = <0x50>;
154 pagesize = <16>;
155 };
156 };
157
158 &bsc {
159 flash@0 {
160 compatible = "cfi-flash";
161 reg = <0x00000000 0x4000000>;
162 bank-width = <2>;
163
164 partitions {
165 compatible = "fixed-pa
166 #address-cells = <1>;
167 #size-cells = <1>;
168
169 partition@0 {
170 label = "apps"
171 reg = <0x00000
172 };
173
174 partition@1000000 {
175 label = "data"
176 reg = <0x01000
177 };
178 };
179 };
180 };
181
182 &usb_x1_clk {
183 clock-frequency = <48000000>;
184 };
185
186 &rtc_x1_clk {
187 clock-frequency = <32768>;
188 };
189
190 &pinctrl {
191 /* RIIC ch3 (Port Expander, EEPROM (MA
192 i2c3_pins: i2c3 {
193 pinmux = <RZA1_PINMUX(1, 6, 1)
194 <RZA1_PINMUX(1, 7, 1)
195 };
196
197 keyboard_pins: keyboard {
198 pinmux = <RZA1_PINMUX(1, 9, 3)
199 <RZA1_PINMUX(1, 8, 3)
200 <RZA1_PINMUX(1, 11, 3
201 };
202
203 /* Serial Console */
204 scif2_pins: serial2 {
205 pinmux = <RZA1_PINMUX(3, 0, 6)
206 <RZA1_PINMUX(3, 2, 4)
207 };
208
209 /* Ethernet */
210 ether_pins: ether {
211 /* Ethernet on Ports 1,2,3,5 *
212 pinmux = <RZA1_PINMUX(1, 14, 4
213 <RZA1_PINMUX(5, 9, 2)
214 <RZA1_PINMUX(3, 3, 2)
215 <RZA1_PINMUX(3, 4, 2)
216 <RZA1_PINMUX(3, 5, 2)
217 <RZA1_PINMUX(3, 6, 2)
218 <RZA1_PINMUX(2, 0, 2)
219 <RZA1_PINMUX(2, 1, 2)
220 <RZA1_PINMUX(2, 2, 2)
221 <RZA1_PINMUX(2, 3, 2)
222 <RZA1_PINMUX(2, 4, 2)
223 <RZA1_PINMUX(2, 5, 2)
224 <RZA1_PINMUX(2, 6, 2)
225 <RZA1_PINMUX(2, 7, 2)
226 <RZA1_PINMUX(2, 8, 2)
227 <RZA1_PINMUX(2, 9, 2)
228 <RZA1_PINMUX(2, 10, 2
229 <RZA1_PINMUX(2, 11, 2
230 };
231
232 /* SDHI ch1 on CN1 */
233 sdhi1_pins: sdhi1 {
234 pinmux = <RZA1_PINMUX(3, 8, 7)
235 <RZA1_PINMUX(3, 9, 7)
236 <RZA1_PINMUX(3, 10, 7
237 <RZA1_PINMUX(3, 11, 7
238 <RZA1_PINMUX(3, 12, 7
239 <RZA1_PINMUX(3, 13, 7
240 <RZA1_PINMUX(3, 14, 7
241 <RZA1_PINMUX(3, 15, 7
242 };
243 };
244
245 &mtu2 {
246 status = "okay";
247 };
248
249 ðer {
250 pinctrl-names = "default";
251 pinctrl-0 = <ðer_pins>;
252 status = "okay";
253 renesas,no-ether-link;
254 phy-handle = <&phy0>;
255 phy0: ethernet-phy@0 {
256 compatible = "ethernet-phy-idb
257 "ethernet-phy-iee
258 reg = <0>;
259 };
260 };
261
262 &sdhi1 {
263 pinctrl-names = "default";
264 pinctrl-0 = <&sdhi1_pins>;
265 bus-width = <4>;
266 status = "okay";
267 };
268
269 &ostm0 {
270 status = "okay";
271 };
272
273 &ostm1 {
274 status = "okay";
275 };
276
277 &rtc {
278 status = "okay";
279 };
280
281 &scif2 {
282 pinctrl-names = "default";
283 pinctrl-0 = <&scif2_pins>;
284 status = "okay";
285 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.