1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Samsung's Exynos4412 based p4note device fa
4 * Based on exynos4412-midas.dtsi.
5 *
6 * Copyright (c) 2013 Samsung Electronics Co.,
7 * http://www.samsung.com
8 */
9
10 /dts-v1/;
11 #include "exynos4412.dtsi"
12 #include "exynos4412-ppmu-common.dtsi"
13
14 #include <dt-bindings/clock/maxim,max77686.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/linux-event-codes.
17 #include <dt-bindings/interrupt-controller/irq
18 #include <dt-bindings/power/summit,smb347-char
19 #include "exynos-pinctrl.h"
20
21 / {
22 compatible = "samsung,p4note", "samsun
23
24 memory@40000000 {
25 device_type = "memory";
26 reg = <0x40000000 0x7fc00000>;
27 };
28
29 aliases {
30 mmc0 = &mshc_0;
31 mmc2 = &sdhci_2;
32 mmc3 = &sdhci_3;
33 };
34
35 chosen {
36 stdout-path = &serial_2;
37 };
38
39 firmware@204f000 {
40 compatible = "samsung,secure-f
41 reg = <0x0204f000 0x1000>;
42 };
43
44 fixed-rate-clocks {
45 xxti {
46 compatible = "samsung,
47 clock-frequency = <0>;
48 };
49
50 xusbxti {
51 compatible = "samsung,
52 clock-frequency = <240
53 };
54 };
55
56 gpio-keys {
57 compatible = "gpio-keys";
58 pinctrl-names = "default";
59 pinctrl-0 = <&gpio_keys>;
60
61 key-down {
62 gpios = <&gpx2 2 GPIO_
63 linux,code = <KEY_VOLU
64 label = "volume down";
65 debounce-interval = <1
66 };
67
68 key-up {
69 gpios = <&gpx3 3 GPIO_
70 linux,code = <KEY_VOLU
71 label = "volume up";
72 debounce-interval = <1
73 };
74
75 key-power {
76 gpios = <&gpx2 7 GPIO_
77 linux,code = <KEY_POWE
78 label = "power";
79 debounce-interval = <1
80 wakeup-source;
81 };
82 };
83
84 voltage-regulator-1 {
85 compatible = "regulator-fixed"
86 regulator-name = "TSP_LDO1";
87 pinctrl-names = "default";
88 pinctrl-0 = <&tsp_reg_gpio_1>;
89 gpios = <&gpm4 5 GPIO_ACTIVE_H
90 enable-active-high;
91 regulator-always-on;
92 };
93
94 voltage-regulator-2 {
95 compatible = "regulator-fixed"
96 regulator-name = "TSP_LDO2";
97 pinctrl-names = "default";
98 pinctrl-0 = <&tsp_reg_gpio_2>;
99 gpios = <&gpb 5 GPIO_ACTIVE_HI
100 enable-active-high;
101 regulator-always-on;
102 };
103
104 voltage-regulator-3 {
105 compatible = "regulator-fixed"
106 regulator-name = "TSP_LDO3";
107 pinctrl-names = "default";
108 pinctrl-0 = <&tsp_reg_gpio_3>;
109 gpios = <&gpb 7 GPIO_ACTIVE_HI
110 startup-delay-us = <20000>;
111 enable-active-high;
112 regulator-always-on;
113 };
114
115 panel_vdd: voltage-regulator-4 {
116 compatible = "regulator-fixed"
117 regulator-name = "LCD_ENABLE";
118 pinctrl-names = "default";
119 pinctrl-0 = <&lcd_enable>;
120 gpios = <&gpc0 1 GPIO_ACTIVE_H
121 enable-active-high;
122 regulator-boot-on;
123 };
124
125 wlan_pwrseq: sdhci3-pwrseq {
126 compatible = "mmc-pwrseq-simpl
127 reset-gpios = <&gpm3 5 GPIO_AC
128 pinctrl-0 = <&wifi_reset>;
129 pinctrl-names = "default";
130 clocks = <&max77686 MAX77686_C
131 clock-names = "ext_clock";
132 };
133
134 battery_cell: battery-cell {
135 compatible = "simple-battery";
136 device-chemistry = "lithium-io
137 constant-charge-current-max-mi
138 precharge-current-microamp = <
139 charge-term-current-microamp =
140 constant-charge-voltage-max-mi
141 };
142
143 i2c-gpio-1 {
144 compatible = "i2c-gpio";
145 sda-gpios = <&gpy2 4 (GPIO_ACT
146 scl-gpios = <&gpy2 5 (GPIO_ACT
147 i2c-gpio,delay-us = <2>;
148 #address-cells = <1>;
149 #size-cells = <0>;
150
151 magnetometer@c {
152 compatible = "asahi-ka
153 reg = <0x0c>;
154 pinctrl-0 = <&ak8975_i
155 pinctrl-names = "defau
156 interrupt-parent = <&g
157 interrupts = <7 IRQ_TY
158 };
159 };
160
161 i2c-gpio-2 {
162 compatible = "i2c-gpio";
163 sda-gpios = <&gpy0 2 (GPIO_ACT
164 scl-gpios = <&gpy0 3 (GPIO_ACT
165 i2c-gpio,delay-us = <2>;
166 #address-cells = <1>;
167 #size-cells = <0>;
168
169 fuel-gauge@36 {
170 compatible = "maxim,ma
171 reg = <0x36>;
172 pinctrl-0 = <&fuel_ale
173 pinctrl-names = "defau
174 interrupt-parent = <&g
175 interrupts = <3 IRQ_TY
176 maxim,rsns-microohm =
177 maxim,over-heat-temp =
178 maxim,over-volt = <430
179 };
180 };
181
182 i2c-gpio-3 {
183 compatible = "i2c-gpio";
184 sda-gpios = <&gpm4 1 (GPIO_ACT
185 scl-gpios = <&gpm4 0 (GPIO_ACT
186 i2c-gpio,delay-us = <5>;
187 #address-cells = <1>;
188 #size-cells = <0>;
189
190 adc@41 {
191 compatible = "st,stmpe
192 reg = <0x41>;
193 pinctrl-0 = <&stmpe_ad
194 pinctrl-names = "defau
195 interrupt-parent = <&g
196 interrupts = <1 IRQ_TY
197 st,adc-freq = <3>;
198 st,mod-12b = <1>;
199 st,ref-sel = <0>;
200 st,sample-time = <3>;
201
202 adc {
203 compatible = "
204 #io-channel-ce
205 st,norequest-m
206 };
207 };
208 };
209
210 i2c-gpio-4 {
211 compatible = "i2c-gpio";
212 sda-gpios = <&gpm2 0 (GPIO_ACT
213 scl-gpios = <&gpm2 1 (GPIO_ACT
214
215 i2c-gpio,delay-us = <2>;
216 #address-cells = <1>;
217 #size-cells = <0>;
218
219 power_supply: charger@6 {
220 compatible = "summit,s
221 reg = <0x6>;
222 summit,enable-usb-char
223 summit,enable-charge-c
224 summit,fast-voltage-th
225 summit,chip-temperatur
226 summit,usb-current-lim
227
228 monitored-battery = <&
229 };
230 };
231
232 panel {
233 compatible = "samsung,ltl101al
234 pinctrl-0 = <&lvds_nshdn>;
235 pinctrl-names = "default";
236 power-supply = <&panel_vdd>;
237 enable-gpios = <&gpm0 5 GPIO_A
238 backlight = <&backlight>;
239
240 port {
241 lcd_ep: endpoint {
242 remote-endpoin
243 };
244 };
245 };
246
247 backlight: backlight {
248 compatible = "pwm-backlight";
249 pinctrl-0 = <&led_bl_reset>;
250 pinctrl-names = "default";
251 enable-gpios = <&gpm0 1 GPIO_A
252 power-supply = <&panel_vdd>;
253 pwms = <&pwm 1 78770 0>;
254 brightness-levels = <0 48 128
255 num-interpolated-steps = <8>;
256 default-brightness-level = <12
257 };
258 };
259
260 &adc {
261 vdd-supply = <&ldo3_reg>;
262 /* not verified */
263 status = "okay";
264 };
265
266 &bus_dmc {
267 devfreq-events = <&ppmu_dmc0_3>, <&ppm
268 vdd-supply = <&buck1_reg>;
269 status = "okay";
270 };
271
272 &bus_acp {
273 devfreq = <&bus_dmc>;
274 status = "okay";
275 };
276
277 &bus_c2c {
278 devfreq = <&bus_dmc>;
279 status = "okay";
280 };
281
282 &bus_leftbus {
283 devfreq-events = <&ppmu_leftbus_3>, <&
284 vdd-supply = <&buck3_reg>;
285 status = "okay";
286 };
287
288 &bus_rightbus {
289 devfreq = <&bus_leftbus>;
290 status = "okay";
291 };
292
293 &bus_display {
294 devfreq = <&bus_leftbus>;
295 status = "okay";
296 };
297
298 &bus_fsys {
299 devfreq = <&bus_leftbus>;
300 status = "okay";
301 };
302
303 &bus_peri {
304 devfreq = <&bus_leftbus>;
305 status = "okay";
306 };
307
308 &bus_mfc {
309 devfreq = <&bus_leftbus>;
310 status = "okay";
311 };
312
313 &cpu0 {
314 cpu0-supply = <&buck2_reg>;
315 };
316
317 &cpu_thermal {
318 cooling-maps {
319 map0 {
320 /* Corresponds to 800M
321 cooling-device = <&cpu
322 <&cpu
323 };
324 map1 {
325 /* Corresponds to 200M
326 cooling-device = <&cpu
327 <&cpu
328 };
329 };
330 };
331
332 &exynos_usbphy {
333 status = "okay";
334 };
335
336 &fimd {
337 pinctrl-0 = <&lcd_clk &lcd_data24>;
338 pinctrl-names = "default";
339 #address-cells = <1>;
340 #size-cells = <0>;
341 status = "okay";
342
343 samsung,invert-vclk;
344
345 port@3 {
346 reg = <3>;
347
348 fimd_ep: endpoint {
349 remote-endpoint = <&lc
350 };
351 };
352 };
353
354 &gpu {
355 mali-supply = <&buck4_reg>;
356 status = "okay";
357 };
358
359 &hsotg {
360 vusb_a-supply = <&ldo12_reg>;
361 dr_mode = "peripheral";
362 status = "okay";
363 };
364
365 &i2c_1 {
366 samsung,i2c-sda-delay = <100>;
367 samsung,i2c-slave-addr = <0x10>;
368 samsung,i2c-max-bus-freq = <400000>;
369 pinctrl-0 = <&i2c1_bus>;
370 pinctrl-names = "default";
371 status = "okay";
372
373 accelerometer@19 {
374 compatible = "st,lsm330dlc-acc
375 reg = <0x19>;
376 interrupt-parent = <&gpx0>;
377 interrupts = <0 IRQ_TYPE_EDGE_
378 pinctrl-0 = <&accelerometer_ir
379 pinctrl-names = "default";
380 mount-matrix = "1", "0", "0
381 "0", "-1", "0
382 "0", "0", "-1
383 };
384
385 gyro@6b {
386 compatible = "st,lsm330dlc-gyr
387 reg = <0x6b>;
388 interrupt-parent = <&gpx0>;
389 interrupts = <6 IRQ_TYPE_EDGE_
390 pinctrl-0 = <&gyro_data_enable
391 pinctrl-names = "default";
392 mount-matrix = "1", "0", "0
393 "0", "-1", "0
394 "0", "0", "-1
395 };
396 };
397
398 &i2c_3 {
399 samsung,i2c-sda-delay = <100>;
400 samsung,i2c-slave-addr = <0x10>;
401 samsung,i2c-max-bus-freq = <400000>;
402 pinctrl-0 = <&i2c3_bus>;
403 pinctrl-names = "default";
404 status = "okay";
405
406 touchscreen@4a {
407 compatible = "atmel,maxtouch";
408 reg = <0x4a>;
409 pinctrl-0 = <&tsp_rst &tsp_irq
410 pinctrl-names = "default";
411 interrupt-parent = <&gpm2>;
412 interrupts = <3 IRQ_TYPE_LEVEL
413 reset-gpios = <&gpm0 4 GPIO_AC
414 };
415 };
416
417 &i2c_7 {
418 samsung,i2c-sda-delay = <100>;
419 samsung,i2c-slave-addr = <0x10>;
420 samsung,i2c-max-bus-freq = <400000>;
421 pinctrl-0 = <&i2c7_bus>;
422 pinctrl-names = "default";
423 status = "okay";
424
425 max77686: pmic@9 {
426 compatible = "maxim,max77686";
427 interrupt-parent = <&gpx0>;
428 interrupts = <7 IRQ_TYPE_LEVEL
429 pinctrl-0 = <&max77686_irq>;
430 pinctrl-names = "default";
431 wakeup-source;
432 reg = <0x09>;
433 #clock-cells = <1>;
434
435 voltage-regulators {
436 ldo1_reg: LDO1 {
437 regulator-name
438 regulator-alwa
439 };
440
441 ldo2_reg: LDO2 {
442 regulator-name
443 regulator-alwa
444 };
445
446 /* WM8994 audio */
447 ldo3_reg: LDO3 {
448 regulator-name
449 regulator-min-
450 regulator-max-
451 regulator-alwa
452 regulator-boot
453
454 regulator-stat
455 regula
456 };
457 };
458
459 ldo4_reg: LDO4 {
460 regulator-name
461 regulator-alwa
462 };
463
464 ldo5_reg: LDO5 {
465 regulator-name
466 regulator-min-
467 regulator-max-
468
469 regulator-stat
470 regula
471 };
472 };
473
474 ldo6_reg: LDO6 {
475 regulator-name
476 regulator-alwa
477 };
478
479 ldo7_reg: LDO7 {
480 regulator-name
481 regulator-alwa
482 };
483
484 /* CSI IP block */
485 ldo8_reg: LDO8 {
486 regulator-name
487 regulator-min-
488 regulator-max-
489 regulator-alwa
490 regulator-boot
491
492 regulator-stat
493 regula
494 };
495 };
496
497 /* IR LED on/off */
498 ldo9_reg: LDO9 {
499 regulator-name
500 regulator-min-
501 regulator-max-
502
503 regulator-stat
504 regula
505 };
506 };
507
508 /* CSI IP block */
509 ldo10_reg: LDO10 {
510 regulator-name
511 regulator-min-
512 regulator-max-
513 regulator-alwa
514 regulator-boot
515
516 regulator-stat
517 regula
518 };
519 };
520
521 ldo11_reg: LDO11 {
522 regulator-name
523 regulator-min-
524 regulator-max-
525 regulator-alwa
526 regulator-boot
527
528 regulator-stat
529 regula
530 };
531 };
532
533 /* USB OTG */
534 ldo12_reg: LDO12 {
535 regulator-name
536 regulator-min-
537 regulator-max-
538 regulator-alwa
539 regulator-boot
540
541 regulator-stat
542 regula
543 };
544 };
545
546 /* not connected */
547 ldo13_reg: LDO13 {
548 regulator-name
549 };
550
551 ldo14_reg: LDO14 {
552 regulator-name
553 regulator-min-
554 regulator-max-
555 regulator-alwa
556 regulator-boot
557
558 regulator-stat
559 regula
560 };
561 };
562
563 ldo15_reg: LDO15 {
564 regulator-name
565 regulator-alwa
566 };
567
568 ldo16_reg: LDO16 {
569 regulator-name
570 regulator-alwa
571 };
572
573 /* not connected */
574 ldo17_reg: LDO17 {
575 regulator-name
576 };
577
578 /* Camera ISX012 */
579 ldo18_reg: LDO18 {
580 regulator-name
581 regulator-min-
582 regulator-max-
583
584 regulator-stat
585 regula
586 };
587 };
588
589 /* Camera S5K6A3 */
590 ldo19_reg: LDO19 {
591 regulator-name
592 regulator-min-
593 regulator-max-
594
595 regulator-stat
596 regula
597 };
598 };
599
600 /* not connected */
601 ldo20_reg: LDO20 {
602 regulator-name
603 };
604
605 /* MMC2 */
606 ldo21_reg: LDO21 {
607 regulator-name
608 regulator-min-
609 regulator-max-
610 maxim,ena-gpio
611 };
612
613 /* not connected */
614 ldo22_reg: LDO22 {
615 regulator-name
616 };
617
618 /* ADC */
619 ldo23_reg: LDO23 {
620 regulator-name
621 regulator-min-
622 regulator-max-
623 regulator-alwa
624 regulator-boot
625
626 regulator-stat
627 regula
628 };
629 };
630
631 /* Camera S5K6A3 */
632 ldo24_reg: LDO24 {
633 regulator-name
634 regulator-min-
635 regulator-max-
636
637 regulator-stat
638 regula
639 };
640 };
641
642 ldo25_reg: LDO25 {
643 regulator-name
644 regulator-min-
645 regulator-max-
646
647 regulator-stat
648 regula
649 };
650 };
651
652 /* Camera ISX012 */
653 ldo26_reg: LDO26 {
654 regulator-name
655 regulator-min-
656 regulator-max-
657
658 regulator-stat
659 regula
660 };
661 };
662
663 buck1_reg: BUCK1 {
664 regulator-name
665 regulator-min-
666 regulator-max-
667 regulator-alwa
668 regulator-boot
669 };
670
671 buck2_reg: BUCK2 {
672 regulator-name
673 regulator-min-
674 regulator-max-
675 regulator-alwa
676 regulator-boot
677 };
678
679 buck3_reg: BUCK3 {
680 regulator-name
681 regulator-min-
682 regulator-max-
683 regulator-alwa
684 regulator-boot
685 };
686
687 buck4_reg: BUCK4 {
688 regulator-name
689 regulator-min-
690 regulator-max-
691 regulator-boot
692 };
693
694 buck5_reg: BUCK5 {
695 regulator-name
696 regulator-alwa
697 };
698
699 buck6_reg: BUCK6 {
700 regulator-name
701 regulator-alwa
702 };
703
704 buck7_reg: BUCK7 {
705 regulator-name
706 regulator-alwa
707 };
708
709 /* not connected */
710 buck8_reg: BUCK8 {
711 regulator-name
712 };
713
714 buck9_reg: BUCK9 {
715 regulator-name
716 regulator-min-
717 regulator-max-
718
719 regulator-stat
720 regula
721 };
722 };
723 };
724 };
725 };
726
727 &mshc_0 {
728 broken-cd;
729 non-removable;
730 card-detect-delay = <200>;
731 clock-frequency = <400000000>;
732 samsung,dw-mshc-ciu-div = <0>;
733 samsung,dw-mshc-sdr-timing = <2 3>;
734 samsung,dw-mshc-ddr-timing = <1 2>;
735 mmc-ddr-1_8v;
736 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bu
737 pinctrl-names = "default";
738 bus-width = <4>;
739 cap-mmc-highspeed;
740 cap-sd-highspeed;
741 status = "okay";
742 };
743
744 &pinctrl_0 {
745 pinctrl-names = "default";
746 pinctrl-0 = <&sleep0>;
747
748 tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
749 samsung,pins = "gpb-5";
750 samsung,pin-function = <EXYNOS
751 samsung,pin-pud = <EXYNOS_PIN_
752 };
753
754 tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
755 samsung,pins = "gpb-7";
756 samsung,pin-function = <EXYNOS
757 samsung,pin-pud = <EXYNOS_PIN_
758 };
759
760 lcd_enable: lcd-enable-pins {
761 samsung,pins = "gpc0-1";
762 samsung,pin-function = <EXYNOS
763 samsung,pin-pud = <EXYNOS_PIN_
764 };
765
766 sleep0: sleep-state {
767 PIN_SLP(gpa0-0, INPUT, NONE);
768 PIN_SLP(gpa0-1, OUT0, NONE);
769 PIN_SLP(gpa0-2, INPUT, NONE);
770 PIN_SLP(gpa0-3, INPUT, UP);
771 PIN_SLP(gpa0-4, INPUT, NONE);
772 PIN_SLP(gpa0-5, INPUT, DOWN);
773 PIN_SLP(gpa0-6, INPUT, DOWN);
774 PIN_SLP(gpa0-7, INPUT, UP);
775
776 PIN_SLP(gpa1-0, INPUT, DOWN);
777 PIN_SLP(gpa1-1, INPUT, DOWN);
778 PIN_SLP(gpa1-2, INPUT, DOWN);
779 PIN_SLP(gpa1-3, INPUT, DOWN);
780 PIN_SLP(gpa1-4, INPUT, DOWN);
781 PIN_SLP(gpa1-5, INPUT, DOWN);
782
783 PIN_SLP(gpb-0, INPUT, NONE);
784 PIN_SLP(gpb-1, INPUT, NONE);
785 PIN_SLP(gpb-2, INPUT, NONE);
786 PIN_SLP(gpb-3, INPUT, NONE);
787 PIN_SLP(gpb-4, INPUT, DOWN);
788 PIN_SLP(gpb-5, INPUT, DOWN);
789 PIN_SLP(gpb-6, INPUT, DOWN);
790 PIN_SLP(gpb-7, INPUT, DOWN);
791
792 PIN_SLP(gpc0-0, INPUT, DOWN);
793 PIN_SLP(gpc0-1, INPUT, DOWN);
794 PIN_SLP(gpc0-2, INPUT, DOWN);
795 PIN_SLP(gpc0-3, INPUT, DOWN);
796 PIN_SLP(gpc0-4, INPUT, DOWN);
797
798 PIN_SLP(gpc1-0, INPUT, UP);
799 PIN_SLP(gpc1-1, PREV, NONE);
800 PIN_SLP(gpc1-2, INPUT, UP);
801 PIN_SLP(gpc1-3, INPUT, UP);
802 PIN_SLP(gpc1-4, INPUT, UP);
803
804 PIN_SLP(gpd0-0, INPUT, DOWN);
805 PIN_SLP(gpd0-1, OUT0, NONE);
806 PIN_SLP(gpd0-2, INPUT, NONE);
807 PIN_SLP(gpd0-3, INPUT, NONE);
808
809 PIN_SLP(gpd1-0, INPUT, DOWN);
810 PIN_SLP(gpd1-1, INPUT, DOWN);
811 PIN_SLP(gpd1-2, INPUT, NONE);
812 PIN_SLP(gpd1-3, INPUT, NONE);
813
814 PIN_SLP(gpf0-0, OUT0, NONE);
815 PIN_SLP(gpf0-1, OUT0, NONE);
816 PIN_SLP(gpf0-2, OUT0, NONE);
817 PIN_SLP(gpf0-3, OUT0, NONE);
818 PIN_SLP(gpf0-4, OUT0, NONE);
819 PIN_SLP(gpf0-5, OUT0, NONE);
820 PIN_SLP(gpf0-6, OUT0, NONE);
821 PIN_SLP(gpf0-7, OUT0, NONE);
822
823 PIN_SLP(gpf1-0, OUT0, NONE);
824 PIN_SLP(gpf1-1, OUT0, NONE);
825 PIN_SLP(gpf1-2, OUT0, NONE);
826 PIN_SLP(gpf1-3, OUT0, NONE);
827 PIN_SLP(gpf1-4, OUT0, NONE);
828 PIN_SLP(gpf1-5, OUT0, NONE);
829 PIN_SLP(gpf1-6, OUT0, NONE);
830 PIN_SLP(gpf1-7, OUT0, NONE);
831
832 PIN_SLP(gpf2-0, OUT0, NONE);
833 PIN_SLP(gpf2-1, OUT0, NONE);
834 PIN_SLP(gpf2-2, OUT0, NONE);
835 PIN_SLP(gpf2-3, OUT0, NONE);
836 PIN_SLP(gpf2-4, OUT0, NONE);
837 PIN_SLP(gpf2-5, OUT0, NONE);
838 PIN_SLP(gpf2-6, OUT0, NONE);
839 PIN_SLP(gpf2-7, OUT0, NONE);
840
841 PIN_SLP(gpf3-0, OUT0, NONE);
842 PIN_SLP(gpf3-1, OUT0, NONE);
843 PIN_SLP(gpf3-2, OUT0, NONE);
844 PIN_SLP(gpf3-3, OUT0, NONE);
845 PIN_SLP(gpf3-4, OUT0, NONE);
846 PIN_SLP(gpf3-5, OUT0, NONE);
847
848 PIN_SLP(gpj0-0, INPUT, DOWN);
849 PIN_SLP(gpj0-1, INPUT, DOWN);
850 PIN_SLP(gpj0-2, INPUT, DOWN);
851 PIN_SLP(gpj0-3, PREV, NONE);
852 PIN_SLP(gpj0-4, PREV, NONE);
853 PIN_SLP(gpj0-5, OUT0, NONE);
854 PIN_SLP(gpj0-6, OUT0, NONE);
855 PIN_SLP(gpj0-7, OUT0, NONE);
856
857 PIN_SLP(gpj1-0, OUT0, NONE);
858 PIN_SLP(gpj1-1, INPUT, DOWN);
859 PIN_SLP(gpj1-2, PREV, NONE);
860 PIN_SLP(gpj1-3, OUT0, NONE);
861 };
862 };
863
864 &pinctrl_1 {
865 pinctrl-names = "default";
866 pinctrl-0 = <&sleep1>;
867
868 sd3_wifi: sd3-wifi-pins {
869 samsung,pins = "gpk3-3", "gpk3
870 samsung,pin-function = <EXYNOS
871 samsung,pin-pud = <EXYNOS_PIN_
872 };
873
874 bt_shutdown: bt-shutdown-pins {
875 samsung,pins = "gpl0-6";
876 samsung,pin-function = <EXYNOS
877 samsung,pin-pud = <EXYNOS_PIN_
878 };
879
880 gyro_data_enable: gyro-data-enable-pin
881 samsung,pins = "gpl2-0";
882 samsung,pin-function = <EXYNOS
883 samsung,pin-pud = <EXYNOS_PIN_
884 };
885
886 uart_sel: uart-sel-pins {
887 samsung,pins = "gpl2-7";
888 samsung,pin-function = <EXYNOS
889 samsung,pin-pud = <EXYNOS_PIN_
890 samsung,pin-val = <1>;
891 /* 0 = CP, 1 = AP (serial outp
892 };
893
894 led_bl_reset: led-bl-reset-pins {
895 samsung,pins = "gpm0-1";
896 samsung,pin-function = <EXYNOS
897 samsung,pin-pud = <EXYNOS_PIN_
898 };
899
900 tsp_rst: tsp-rst-pins {
901 samsung,pins = "gpm0-4";
902 samsung,pin-function = <EXYNOS
903 samsung,pin-pud = <EXYNOS_PIN_
904 };
905
906 lvds_nshdn: lvds-nshdn-pins {
907 samsung,pins = "gpm0-5";
908 samsung,pin-function = <EXYNOS
909 samsung,pin-pud = <EXYNOS_PIN_
910 };
911
912 tsp_irq: tsp-irq-pins {
913 samsung,pins = "gpm2-3";
914 samsung,pin-function = <EXYNOS
915 samsung,pin-pud = <EXYNOS_PIN_
916 };
917
918 wifi_reset: wifi-reset-pins {
919 samsung,pins = "gpm3-5";
920 samsung,pin-function = <EXYNOS
921 samsung,pin-pud = <EXYNOS_PIN_
922 };
923
924 tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
925 samsung,pins = "gpm4-5";
926 samsung,pin-function = <EXYNOS
927 samsung,pin-pud = <EXYNOS_PIN_
928 };
929
930 ak8975_irq: ak8975-irq-pins {
931 samsung,pins = "gpm4-7";
932 samsung,pin-function = <EXYNOS
933 samsung,pin-pud = <EXYNOS_PIN_
934 };
935
936 accelerometer_irq: accelerometer-irq-p
937 samsung,pins = "gpx0-0";
938 samsung,pin-function = <EXYNOS
939 samsung,pin-pud = <EXYNOS_PIN_
940 };
941
942 stmpe_adc_irq: stmpe-adc-irq-pins {
943 samsung,pins = "gpx0-1";
944 samsung,pin-function = <EXYNOS
945 samsung,pin-pud = <EXYNOS_PIN_
946 };
947
948 gyro_irq: gyro-irq-pins {
949 samsung,pins = "gpx0-6";
950 samsung,pin-function = <EXYNOS
951 samsung,pin-pud = <EXYNOS_PIN_
952 };
953
954 max77686_irq: max77686-irq-pins {
955 samsung,pins = "gpx0-7";
956 samsung,pin-pud = <EXYNOS_PIN_
957 };
958
959 gpio_keys: gpio-keys-pins {
960 samsung,pins = "gpx2-2", "gpx2
961 samsung,pin-pud = <EXYNOS_PIN_
962 };
963
964 fuel_alert_irq: fuel-alert-irq-pins {
965 samsung,pins = "gpx2-3";
966 samsung,pin-function = <EXYNOS
967 samsung,pin-pud = <EXYNOS_PIN_
968 };
969
970 wifi_host_wake: wifi-host-wake-pins {
971 samsung,pins = "gpx2-5";
972 samsung,pin-function = <EXYNOS
973 samsung,pin-pud = <EXYNOS_PIN_
974 };
975
976 bt_host_wakeup: bt-host-wakeup-pins {
977 samsung,pins = "gpx2-6";
978 samsung,pin-function = <EXYNOS
979 samsung,pin-pud = <EXYNOS_PIN_
980 };
981
982 bt_device_wakeup: bt-device-wakeup-pin
983 samsung,pins = "gpx3-1";
984 samsung,pin-function = <EXYNOS
985 samsung,pin-pud = <EXYNOS_PIN_
986 };
987
988 sdhci2_cd: sdhci2-cd-pins {
989 samsung,pins = "gpx3-4";
990 samsung,pin-pud = <EXYNOS_PIN_
991 };
992
993 sleep1: sleep-state {
994 PIN_SLP(gpk0-0, PREV, NONE);
995 PIN_SLP(gpk0-1, PREV, NONE);
996 PIN_SLP(gpk0-2, PREV, NONE);
997 PIN_SLP(gpk0-3, PREV, NONE);
998 PIN_SLP(gpk0-4, PREV, NONE);
999 PIN_SLP(gpk0-5, PREV, NONE);
1000 PIN_SLP(gpk0-6, PREV, NONE);
1001
1002 PIN_SLP(gpk1-0, INPUT, DOWN);
1003 PIN_SLP(gpk1-1, INPUT, DOWN);
1004 PIN_SLP(gpk1-2, INPUT, DOWN);
1005 PIN_SLP(gpk1-3, PREV, NONE);
1006 PIN_SLP(gpk1-4, PREV, NONE);
1007 PIN_SLP(gpk1-5, PREV, NONE);
1008 PIN_SLP(gpk1-6, PREV, NONE);
1009
1010 PIN_SLP(gpk2-0, INPUT, DOWN);
1011 PIN_SLP(gpk2-1, INPUT, DOWN);
1012 PIN_SLP(gpk2-2, INPUT, DOWN);
1013 PIN_SLP(gpk2-3, INPUT, DOWN);
1014 PIN_SLP(gpk2-4, INPUT, DOWN);
1015 PIN_SLP(gpk2-5, INPUT, DOWN);
1016 PIN_SLP(gpk2-6, INPUT, DOWN);
1017
1018 PIN_SLP(gpk3-0, OUT0, NONE);
1019 PIN_SLP(gpk3-1, INPUT, NONE);
1020 PIN_SLP(gpk3-2, INPUT, DOWN);
1021 PIN_SLP(gpk3-3, INPUT, NONE);
1022 PIN_SLP(gpk3-4, INPUT, NONE);
1023 PIN_SLP(gpk3-5, INPUT, NONE);
1024 PIN_SLP(gpk3-6, INPUT, NONE);
1025
1026 PIN_SLP(gpl0-0, OUT0, NONE);
1027 PIN_SLP(gpl0-1, INPUT, NONE);
1028 PIN_SLP(gpl0-2, INPUT, NONE);
1029 PIN_SLP(gpl0-3, INPUT, DOWN);
1030 PIN_SLP(gpl0-4, PREV, NONE);
1031 PIN_SLP(gpl0-6, PREV, NONE);
1032
1033 PIN_SLP(gpl1-0, OUT0, NONE);
1034 PIN_SLP(gpl1-1, OUT0, NONE);
1035
1036 PIN_SLP(gpl2-0, INPUT, DOWN);
1037 PIN_SLP(gpl2-1, INPUT, DOWN);
1038 PIN_SLP(gpl2-2, INPUT, DOWN);
1039 PIN_SLP(gpl2-3, INPUT, DOWN);
1040 PIN_SLP(gpl2-4, OUT0, NONE);
1041 PIN_SLP(gpl2-5, INPUT, DOWN);
1042 PIN_SLP(gpl2-6, PREV, NONE);
1043 PIN_SLP(gpl2-7, PREV, NONE);
1044
1045 PIN_SLP(gpm0-0, PREV, NONE);
1046 PIN_SLP(gpm0-1, OUT0, NONE);
1047 PIN_SLP(gpm0-2, INPUT, DOWN);
1048 PIN_SLP(gpm0-3, INPUT, NONE);
1049 PIN_SLP(gpm0-4, OUT0, NONE);
1050 PIN_SLP(gpm0-5, OUT0, NONE);
1051 PIN_SLP(gpm0-6, INPUT, DOWN);
1052 PIN_SLP(gpm0-7, OUT0, NONE);
1053
1054 PIN_SLP(gpm1-0, INPUT, NONE);
1055 PIN_SLP(gpm1-1, INPUT, NONE);
1056 PIN_SLP(gpm1-2, INPUT, NONE);
1057 PIN_SLP(gpm1-3, INPUT, NONE);
1058 PIN_SLP(gpm1-4, INPUT, NONE);
1059 PIN_SLP(gpm1-5, INPUT, NONE);
1060 PIN_SLP(gpm1-6, INPUT, DOWN);
1061
1062 PIN_SLP(gpm2-0, INPUT, NONE);
1063 PIN_SLP(gpm2-1, INPUT, NONE);
1064 PIN_SLP(gpm2-2, OUT0, NONE);
1065 PIN_SLP(gpm2-3, OUT0, DOWN);
1066 PIN_SLP(gpm2-4, INPUT, DOWN);
1067
1068 PIN_SLP(gpm3-0, PREV, NONE);
1069 PIN_SLP(gpm3-1, PREV, NONE);
1070 PIN_SLP(gpm3-2, PREV, NONE);
1071 PIN_SLP(gpm3-3, OUT1, NONE);
1072 PIN_SLP(gpm3-4, OUT0, DOWN);
1073 PIN_SLP(gpm3-5, PREV, NONE);
1074 PIN_SLP(gpm3-6, PREV, NONE);
1075 PIN_SLP(gpm3-7, OUT0, NONE);
1076
1077 PIN_SLP(gpm4-0, INPUT, NONE);
1078 PIN_SLP(gpm4-1, INPUT, NONE);
1079 PIN_SLP(gpm4-2, INPUT, DOWN);
1080 PIN_SLP(gpm4-3, INPUT, DOWN);
1081 PIN_SLP(gpm4-4, PREV, NONE);
1082 PIN_SLP(gpm4-5, OUT0, NONE);
1083 PIN_SLP(gpm4-6, OUT0, NONE);
1084 PIN_SLP(gpm4-7, INPUT, DOWN);
1085
1086 PIN_SLP(gpy0-0, INPUT, DOWN);
1087 PIN_SLP(gpy0-1, INPUT, DOWN);
1088 PIN_SLP(gpy0-2, INPUT, NONE);
1089 PIN_SLP(gpy0-3, INPUT, NONE);
1090 PIN_SLP(gpy0-4, INPUT, NONE);
1091 PIN_SLP(gpy0-5, INPUT, NONE);
1092
1093 PIN_SLP(gpy1-0, INPUT, DOWN);
1094 PIN_SLP(gpy1-1, INPUT, DOWN);
1095 PIN_SLP(gpy1-2, INPUT, DOWN);
1096 PIN_SLP(gpy1-3, INPUT, DOWN);
1097
1098 PIN_SLP(gpy2-0, PREV, NONE);
1099 PIN_SLP(gpy2-1, INPUT, DOWN);
1100 PIN_SLP(gpy2-2, INPUT, NONE);
1101 PIN_SLP(gpy2-3, INPUT, NONE);
1102 PIN_SLP(gpy2-4, INPUT, NONE);
1103 PIN_SLP(gpy2-5, INPUT, NONE);
1104
1105 PIN_SLP(gpy3-0, INPUT, DOWN);
1106 PIN_SLP(gpy3-1, INPUT, DOWN);
1107 PIN_SLP(gpy3-2, INPUT, DOWN);
1108 PIN_SLP(gpy3-3, INPUT, DOWN);
1109 PIN_SLP(gpy3-4, INPUT, DOWN);
1110 PIN_SLP(gpy3-5, INPUT, DOWN);
1111 PIN_SLP(gpy3-6, INPUT, DOWN);
1112 PIN_SLP(gpy3-7, INPUT, DOWN);
1113
1114 PIN_SLP(gpy4-0, INPUT, DOWN);
1115 PIN_SLP(gpy4-1, INPUT, DOWN);
1116 PIN_SLP(gpy4-2, INPUT, DOWN);
1117 PIN_SLP(gpy4-3, INPUT, DOWN);
1118 PIN_SLP(gpy4-4, INPUT, DOWN);
1119 PIN_SLP(gpy4-5, INPUT, DOWN);
1120 PIN_SLP(gpy4-6, INPUT, DOWN);
1121 PIN_SLP(gpy4-7, INPUT, DOWN);
1122
1123 PIN_SLP(gpy5-0, INPUT, DOWN);
1124 PIN_SLP(gpy5-1, INPUT, DOWN);
1125 PIN_SLP(gpy5-2, INPUT, DOWN);
1126 PIN_SLP(gpy5-3, INPUT, DOWN);
1127 PIN_SLP(gpy5-4, INPUT, DOWN);
1128 PIN_SLP(gpy5-5, INPUT, DOWN);
1129 PIN_SLP(gpy5-6, INPUT, DOWN);
1130 PIN_SLP(gpy5-7, INPUT, DOWN);
1131
1132 PIN_SLP(gpy6-0, INPUT, DOWN);
1133 PIN_SLP(gpy6-1, INPUT, DOWN);
1134 PIN_SLP(gpy6-2, INPUT, DOWN);
1135 PIN_SLP(gpy6-3, INPUT, DOWN);
1136 PIN_SLP(gpy6-4, INPUT, DOWN);
1137 PIN_SLP(gpy6-5, INPUT, DOWN);
1138 PIN_SLP(gpy6-6, INPUT, DOWN);
1139 PIN_SLP(gpy6-7, INPUT, DOWN);
1140 };
1141 };
1142
1143 &pinctrl_2 {
1144 pinctrl-names = "default";
1145 pinctrl-0 = <&sleep2>;
1146
1147 sleep2: sleep-state {
1148 PIN_SLP(gpz-0, INPUT, DOWN);
1149 PIN_SLP(gpz-1, INPUT, DOWN);
1150 PIN_SLP(gpz-2, INPUT, DOWN);
1151 PIN_SLP(gpz-3, INPUT, DOWN);
1152 PIN_SLP(gpz-4, INPUT, DOWN);
1153 PIN_SLP(gpz-5, INPUT, DOWN);
1154 PIN_SLP(gpz-6, INPUT, DOWN);
1155 };
1156 };
1157
1158 &pinctrl_3 {
1159 pinctrl-names = "default";
1160 pinctrl-0 = <&sleep3>;
1161
1162 sleep3: sleep-state {
1163 PIN_SLP(gpv0-0, INPUT, DOWN);
1164 PIN_SLP(gpv0-1, INPUT, DOWN);
1165 PIN_SLP(gpv0-2, INPUT, DOWN);
1166 PIN_SLP(gpv0-3, INPUT, DOWN);
1167 PIN_SLP(gpv0-4, INPUT, DOWN);
1168 PIN_SLP(gpv0-5, INPUT, DOWN);
1169 PIN_SLP(gpv0-6, INPUT, DOWN);
1170 PIN_SLP(gpv0-7, INPUT, DOWN);
1171
1172 PIN_SLP(gpv1-0, INPUT, DOWN);
1173 PIN_SLP(gpv1-1, INPUT, DOWN);
1174 PIN_SLP(gpv1-2, INPUT, DOWN);
1175 PIN_SLP(gpv1-3, INPUT, DOWN);
1176 PIN_SLP(gpv1-4, INPUT, DOWN);
1177 PIN_SLP(gpv1-5, INPUT, DOWN);
1178 PIN_SLP(gpv1-6, INPUT, DOWN);
1179 PIN_SLP(gpv1-7, INPUT, DOWN);
1180
1181 PIN_SLP(gpv2-0, INPUT, DOWN);
1182 PIN_SLP(gpv2-1, INPUT, DOWN);
1183 PIN_SLP(gpv2-2, INPUT, DOWN);
1184 PIN_SLP(gpv2-3, INPUT, DOWN);
1185 PIN_SLP(gpv2-4, INPUT, DOWN);
1186 PIN_SLP(gpv2-5, INPUT, DOWN);
1187 PIN_SLP(gpv2-6, INPUT, DOWN);
1188 PIN_SLP(gpv2-7, INPUT, DOWN);
1189
1190 PIN_SLP(gpv3-0, INPUT, DOWN);
1191 PIN_SLP(gpv3-1, INPUT, DOWN);
1192 PIN_SLP(gpv3-2, INPUT, DOWN);
1193 PIN_SLP(gpv3-3, INPUT, DOWN);
1194 PIN_SLP(gpv3-4, INPUT, DOWN);
1195 PIN_SLP(gpv3-5, INPUT, DOWN);
1196 PIN_SLP(gpv3-6, INPUT, DOWN);
1197 PIN_SLP(gpv3-7, INPUT, DOWN);
1198
1199 PIN_SLP(gpv4-0, INPUT, DOWN);
1200 PIN_SLP(gpv4-1, INPUT, DOWN);
1201 };
1202 };
1203
1204 &pmu_system_controller {
1205 assigned-clocks = <&pmu_system_contro
1206 assigned-clock-parents = <&clock CLK_
1207 };
1208
1209 &pwm {
1210 pinctrl-0 = <&pwm1_out>;
1211 pinctrl-names = "default";
1212 samsung,pwm-outputs = <1>;
1213 status = "okay";
1214 };
1215
1216 &rtc {
1217 clocks = <&clock CLK_RTC>, <&max77686
1218 clock-names = "rtc", "rtc_src";
1219 status = "okay";
1220 };
1221
1222 &sdhci_2 {
1223 bus-width = <4>;
1224 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1225 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_b
1226 pinctrl-names = "default";
1227 vmmc-supply = <&ldo21_reg>;
1228 status = "okay";
1229 };
1230
1231 &sdhci_3 {
1232 #address-cells = <1>;
1233 #size-cells = <0>;
1234 non-removable;
1235 bus-width = <4>;
1236 mmc-pwrseq = <&wlan_pwrseq>;
1237
1238 pinctrl-names = "default";
1239 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_w
1240 status = "okay";
1241
1242 wifi@1 {
1243 compatible = "brcm,bcm4329-fm
1244 reg = <0x1>;
1245 pinctrl-names = "default";
1246 pinctrl-0 = <&wifi_host_wake>
1247 interrupt-parent = <&gpx2>;
1248 interrupts = <5 IRQ_TYPE_LEVE
1249 interrupt-names = "host-wake"
1250 };
1251 };
1252
1253 &serial_0 {
1254 pinctrl-0 = <&uart0_data &uart0_fctl>
1255 pinctrl-names = "default";
1256 status = "okay";
1257
1258 bluetooth {
1259 compatible = "brcm,bcm4330-bt
1260 pinctrl-0 = <&bt_shutdown &bt
1261 pinctrl-names = "default";
1262
1263 max-speed = <2000000>;
1264 shutdown-gpios = <&gpl0 6 GPI
1265 device-wakeup-gpios = <&gpx3
1266 host-wakeup-gpios = <&gpx2 6
1267 clocks = <&max77686 MAX77686_
1268 clock-names = "lpo";
1269 };
1270 };
1271
1272 &serial_2 {
1273 pinctrl-0 = <&uart_sel>;
1274 pinctrl-names = "default";
1275 status = "okay";
1276 };
1277
1278 &tmu {
1279 status = "okay";
1280 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.