1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /* 2 /*
3 * Copyright (C) STMicroelectronics 2021 - All 3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4 * Author: Alexandre Torgue <alexandre.torgue@f 4 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5 */ 5 */
6 #include <dt-bindings/interrupt-controller/arm 6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/stm32mp13-clks.h> 7 #include <dt-bindings/clock/stm32mp13-clks.h>
8 #include <dt-bindings/reset/stm32mp13-resets.h 8 #include <dt-bindings/reset/stm32mp13-resets.h>
9 9
10 / { 10 / {
11 #address-cells = <1>; 11 #address-cells = <1>;
12 #size-cells = <1>; 12 #size-cells = <1>;
13 13
14 cpus { 14 cpus {
15 #address-cells = <1>; 15 #address-cells = <1>;
16 #size-cells = <0>; 16 #size-cells = <0>;
17 17
18 cpu0: cpu@0 { 18 cpu0: cpu@0 {
19 compatible = "arm,cort 19 compatible = "arm,cortex-a7";
20 device_type = "cpu"; 20 device_type = "cpu";
21 reg = <0>; 21 reg = <0>;
22 }; 22 };
23 }; 23 };
24 24
25 arm-pmu { 25 arm-pmu {
26 compatible = "arm,cortex-a7-pm 26 compatible = "arm,cortex-a7-pmu";
27 interrupts = <GIC_SPI 133 IRQ_ 27 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
28 interrupt-affinity = <&cpu0>; 28 interrupt-affinity = <&cpu0>;
29 interrupt-parent = <&intc>; 29 interrupt-parent = <&intc>;
30 }; 30 };
31 31
32 firmware { 32 firmware {
33 optee { 33 optee {
34 method = "smc"; 34 method = "smc";
35 compatible = "linaro,o 35 compatible = "linaro,optee-tz";
36 interrupt-parent = <&i 36 interrupt-parent = <&intc>;
37 interrupts = <GIC_PPI 37 interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
38 }; 38 };
39 39
40 scmi: scmi { 40 scmi: scmi {
41 compatible = "linaro,s 41 compatible = "linaro,scmi-optee";
42 #address-cells = <1>; 42 #address-cells = <1>;
43 #size-cells = <0>; 43 #size-cells = <0>;
44 linaro,optee-channel-i 44 linaro,optee-channel-id = <0>;
45 45
46 scmi_clk: protocol@14 46 scmi_clk: protocol@14 {
47 reg = <0x14>; 47 reg = <0x14>;
48 #clock-cells = 48 #clock-cells = <1>;
49 }; 49 };
50 50
51 scmi_reset: protocol@1 51 scmi_reset: protocol@16 {
52 reg = <0x16>; 52 reg = <0x16>;
53 #reset-cells = 53 #reset-cells = <1>;
54 }; 54 };
55 55
56 scmi_voltd: protocol@1 56 scmi_voltd: protocol@17 {
57 reg = <0x17>; 57 reg = <0x17>;
58 58
59 scmi_regu: reg 59 scmi_regu: regulators {
60 #addre 60 #address-cells = <1>;
61 #size- 61 #size-cells = <0>;
62 62
63 scmi_r 63 scmi_reg11: regulator@0 {
64 64 reg = <VOLTD_SCMI_REG11>;
65 65 regulator-name = "reg11";
66 }; 66 };
67 scmi_r 67 scmi_reg18: regulator@1 {
68 68 reg = <VOLTD_SCMI_REG18>;
69 69 regulator-name = "reg18";
70 }; 70 };
71 scmi_u 71 scmi_usb33: regulator@2 {
72 72 reg = <VOLTD_SCMI_USB33>;
73 73 regulator-name = "usb33";
74 }; 74 };
75 }; 75 };
76 }; 76 };
77 }; 77 };
78 }; 78 };
79 79
80 intc: interrupt-controller@a0021000 { 80 intc: interrupt-controller@a0021000 {
81 compatible = "arm,cortex-a7-gi 81 compatible = "arm,cortex-a7-gic";
82 #interrupt-cells = <3>; 82 #interrupt-cells = <3>;
83 interrupt-controller; 83 interrupt-controller;
84 reg = <0xa0021000 0x1000>, 84 reg = <0xa0021000 0x1000>,
85 <0xa0022000 0x2000>; 85 <0xa0022000 0x2000>;
86 }; 86 };
87 87
88 psci { 88 psci {
89 compatible = "arm,psci-1.0"; 89 compatible = "arm,psci-1.0";
90 method = "smc"; 90 method = "smc";
91 }; 91 };
92 92
93 timer { 93 timer {
94 compatible = "arm,armv7-timer" 94 compatible = "arm,armv7-timer";
95 interrupts = <GIC_PPI 13 (GIC_ 95 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
96 <GIC_PPI 14 (GIC_ 96 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
97 <GIC_PPI 11 (GIC_ 97 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
98 <GIC_PPI 10 (GIC_ 98 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
99 interrupt-parent = <&intc>; 99 interrupt-parent = <&intc>;
100 always-on; 100 always-on;
101 }; 101 };
102 102
103 soc { 103 soc {
104 compatible = "simple-bus"; 104 compatible = "simple-bus";
105 #address-cells = <1>; 105 #address-cells = <1>;
106 #size-cells = <1>; 106 #size-cells = <1>;
107 interrupt-parent = <&intc>; 107 interrupt-parent = <&intc>;
108 ranges; 108 ranges;
109 109
110 timers2: timer@40000000 { 110 timers2: timer@40000000 {
111 #address-cells = <1>; 111 #address-cells = <1>;
112 #size-cells = <0>; 112 #size-cells = <0>;
113 compatible = "st,stm32 113 compatible = "st,stm32-timers";
114 reg = <0x40000000 0x40 114 reg = <0x40000000 0x400>;
115 interrupts = <GIC_SPI 115 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
116 interrupt-names = "glo 116 interrupt-names = "global";
117 clocks = <&rcc TIM2_K> 117 clocks = <&rcc TIM2_K>;
118 clock-names = "int"; 118 clock-names = "int";
119 dmas = <&dmamux1 18 0x 119 dmas = <&dmamux1 18 0x400 0x1>,
120 <&dmamux1 19 0x 120 <&dmamux1 19 0x400 0x1>,
121 <&dmamux1 20 0x 121 <&dmamux1 20 0x400 0x1>,
122 <&dmamux1 21 0x 122 <&dmamux1 21 0x400 0x1>,
123 <&dmamux1 22 0x 123 <&dmamux1 22 0x400 0x1>;
124 dma-names = "ch1", "ch 124 dma-names = "ch1", "ch2", "ch3", "ch4", "up";
125 status = "disabled"; 125 status = "disabled";
126 126
127 pwm { 127 pwm {
128 compatible = " 128 compatible = "st,stm32-pwm";
129 #pwm-cells = < 129 #pwm-cells = <3>;
130 status = "disa 130 status = "disabled";
131 }; 131 };
132 132
133 timer@1 { 133 timer@1 {
134 compatible = " 134 compatible = "st,stm32h7-timer-trigger";
135 reg = <1>; 135 reg = <1>;
136 status = "disa 136 status = "disabled";
137 }; 137 };
138 138
139 counter { 139 counter {
140 compatible = " 140 compatible = "st,stm32-timer-counter";
141 status = "disa 141 status = "disabled";
142 }; 142 };
143 }; 143 };
144 144
145 timers3: timer@40001000 { 145 timers3: timer@40001000 {
146 #address-cells = <1>; 146 #address-cells = <1>;
147 #size-cells = <0>; 147 #size-cells = <0>;
148 compatible = "st,stm32 148 compatible = "st,stm32-timers";
149 reg = <0x40001000 0x40 149 reg = <0x40001000 0x400>;
150 interrupts = <GIC_SPI 150 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
151 interrupt-names = "glo 151 interrupt-names = "global";
152 clocks = <&rcc TIM3_K> 152 clocks = <&rcc TIM3_K>;
153 clock-names = "int"; 153 clock-names = "int";
154 dmas = <&dmamux1 23 0x 154 dmas = <&dmamux1 23 0x400 0x1>,
155 <&dmamux1 24 0x 155 <&dmamux1 24 0x400 0x1>,
156 <&dmamux1 25 0x 156 <&dmamux1 25 0x400 0x1>,
157 <&dmamux1 26 0x 157 <&dmamux1 26 0x400 0x1>,
158 <&dmamux1 27 0x 158 <&dmamux1 27 0x400 0x1>,
159 <&dmamux1 28 0x 159 <&dmamux1 28 0x400 0x1>;
160 dma-names = "ch1", "ch 160 dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
161 status = "disabled"; 161 status = "disabled";
162 162
163 pwm { 163 pwm {
164 compatible = " 164 compatible = "st,stm32-pwm";
165 #pwm-cells = < 165 #pwm-cells = <3>;
166 status = "disa 166 status = "disabled";
167 }; 167 };
168 168
169 timer@2 { 169 timer@2 {
170 compatible = " 170 compatible = "st,stm32h7-timer-trigger";
171 reg = <2>; 171 reg = <2>;
172 status = "disa 172 status = "disabled";
173 }; 173 };
174 174
175 counter { 175 counter {
176 compatible = " 176 compatible = "st,stm32-timer-counter";
177 status = "disa 177 status = "disabled";
178 }; 178 };
179 }; 179 };
180 180
181 timers4: timer@40002000 { 181 timers4: timer@40002000 {
182 #address-cells = <1>; 182 #address-cells = <1>;
183 #size-cells = <0>; 183 #size-cells = <0>;
184 compatible = "st,stm32 184 compatible = "st,stm32-timers";
185 reg = <0x40002000 0x40 185 reg = <0x40002000 0x400>;
186 interrupts = <GIC_SPI 186 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
187 interrupt-names = "glo 187 interrupt-names = "global";
188 clocks = <&rcc TIM4_K> 188 clocks = <&rcc TIM4_K>;
189 clock-names = "int"; 189 clock-names = "int";
190 dmas = <&dmamux1 29 0x 190 dmas = <&dmamux1 29 0x400 0x1>,
191 <&dmamux1 30 0x 191 <&dmamux1 30 0x400 0x1>,
192 <&dmamux1 31 0x 192 <&dmamux1 31 0x400 0x1>,
193 <&dmamux1 32 0x 193 <&dmamux1 32 0x400 0x1>;
194 dma-names = "ch1", "ch 194 dma-names = "ch1", "ch2", "ch3", "up";
195 status = "disabled"; 195 status = "disabled";
196 196
197 pwm { 197 pwm {
198 compatible = " 198 compatible = "st,stm32-pwm";
199 #pwm-cells = < 199 #pwm-cells = <3>;
200 status = "disa 200 status = "disabled";
201 }; 201 };
202 202
203 timer@3 { 203 timer@3 {
204 compatible = " 204 compatible = "st,stm32h7-timer-trigger";
205 reg = <3>; 205 reg = <3>;
206 status = "disa 206 status = "disabled";
207 }; 207 };
208 208
209 counter { 209 counter {
210 compatible = " 210 compatible = "st,stm32-timer-counter";
211 status = "disa 211 status = "disabled";
212 }; 212 };
213 }; 213 };
214 214
215 timers5: timer@40003000 { 215 timers5: timer@40003000 {
216 #address-cells = <1>; 216 #address-cells = <1>;
217 #size-cells = <0>; 217 #size-cells = <0>;
218 compatible = "st,stm32 218 compatible = "st,stm32-timers";
219 reg = <0x40003000 0x40 219 reg = <0x40003000 0x400>;
220 interrupts = <GIC_SPI 220 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
221 interrupt-names = "glo 221 interrupt-names = "global";
222 clocks = <&rcc TIM5_K> 222 clocks = <&rcc TIM5_K>;
223 clock-names = "int"; 223 clock-names = "int";
224 dmas = <&dmamux1 55 0x 224 dmas = <&dmamux1 55 0x400 0x1>,
225 <&dmamux1 56 0x 225 <&dmamux1 56 0x400 0x1>,
226 <&dmamux1 57 0x 226 <&dmamux1 57 0x400 0x1>,
227 <&dmamux1 58 0x 227 <&dmamux1 58 0x400 0x1>,
228 <&dmamux1 59 0x 228 <&dmamux1 59 0x400 0x1>,
229 <&dmamux1 60 0x 229 <&dmamux1 60 0x400 0x1>;
230 dma-names = "ch1", "ch 230 dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
231 status = "disabled"; 231 status = "disabled";
232 232
233 pwm { 233 pwm {
234 compatible = " 234 compatible = "st,stm32-pwm";
235 #pwm-cells = < 235 #pwm-cells = <3>;
236 status = "disa 236 status = "disabled";
237 }; 237 };
238 238
239 timer@4 { 239 timer@4 {
240 compatible = " 240 compatible = "st,stm32h7-timer-trigger";
241 reg = <4>; 241 reg = <4>;
242 status = "disa 242 status = "disabled";
243 }; 243 };
244 244
245 counter { 245 counter {
246 compatible = " 246 compatible = "st,stm32-timer-counter";
247 status = "disa 247 status = "disabled";
248 }; 248 };
249 }; 249 };
250 250
251 timers6: timer@40004000 { 251 timers6: timer@40004000 {
252 #address-cells = <1>; 252 #address-cells = <1>;
253 #size-cells = <0>; 253 #size-cells = <0>;
254 compatible = "st,stm32 254 compatible = "st,stm32-timers";
255 reg = <0x40004000 0x40 255 reg = <0x40004000 0x400>;
256 interrupts = <GIC_SPI 256 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
257 interrupt-names = "glo 257 interrupt-names = "global";
258 clocks = <&rcc TIM6_K> 258 clocks = <&rcc TIM6_K>;
259 clock-names = "int"; 259 clock-names = "int";
260 dmas = <&dmamux1 69 0x 260 dmas = <&dmamux1 69 0x400 0x1>;
261 dma-names = "up"; 261 dma-names = "up";
262 status = "disabled"; 262 status = "disabled";
263 263
264 timer@5 { 264 timer@5 {
265 compatible = " 265 compatible = "st,stm32h7-timer-trigger";
266 reg = <5>; 266 reg = <5>;
267 status = "disa 267 status = "disabled";
268 }; 268 };
269 }; 269 };
270 270
271 timers7: timer@40005000 { 271 timers7: timer@40005000 {
272 #address-cells = <1>; 272 #address-cells = <1>;
273 #size-cells = <0>; 273 #size-cells = <0>;
274 compatible = "st,stm32 274 compatible = "st,stm32-timers";
275 reg = <0x40005000 0x40 275 reg = <0x40005000 0x400>;
276 interrupts = <GIC_SPI 276 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
277 interrupt-names = "glo 277 interrupt-names = "global";
278 clocks = <&rcc TIM7_K> 278 clocks = <&rcc TIM7_K>;
279 clock-names = "int"; 279 clock-names = "int";
280 dmas = <&dmamux1 70 0x 280 dmas = <&dmamux1 70 0x400 0x1>;
281 dma-names = "up"; 281 dma-names = "up";
282 status = "disabled"; 282 status = "disabled";
283 283
284 timer@6 { 284 timer@6 {
285 compatible = " 285 compatible = "st,stm32h7-timer-trigger";
286 reg = <6>; 286 reg = <6>;
287 status = "disa 287 status = "disabled";
288 }; 288 };
289 }; 289 };
290 290
291 lptimer1: timer@40009000 { 291 lptimer1: timer@40009000 {
292 #address-cells = <1>; 292 #address-cells = <1>;
293 #size-cells = <0>; 293 #size-cells = <0>;
294 compatible = "st,stm32 294 compatible = "st,stm32-lptimer";
295 reg = <0x40009000 0x40 295 reg = <0x40009000 0x400>;
296 interrupts-extended = 296 interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
297 clocks = <&rcc LPTIM1_ 297 clocks = <&rcc LPTIM1_K>;
298 clock-names = "mux"; 298 clock-names = "mux";
299 wakeup-source; 299 wakeup-source;
300 status = "disabled"; 300 status = "disabled";
301 301
302 pwm { 302 pwm {
303 compatible = " 303 compatible = "st,stm32-pwm-lp";
304 #pwm-cells = < 304 #pwm-cells = <3>;
305 status = "disa 305 status = "disabled";
306 }; 306 };
307 307
308 trigger@0 { 308 trigger@0 {
309 compatible = " 309 compatible = "st,stm32-lptimer-trigger";
310 reg = <0>; 310 reg = <0>;
311 status = "disa 311 status = "disabled";
312 }; 312 };
313 313
314 counter { 314 counter {
315 compatible = " 315 compatible = "st,stm32-lptimer-counter";
316 status = "disa 316 status = "disabled";
317 }; 317 };
318 318
319 timer { 319 timer {
320 compatible = " 320 compatible = "st,stm32-lptimer-timer";
321 status = "disa 321 status = "disabled";
322 }; 322 };
323 }; 323 };
324 324
325 i2s2: audio-controller@4000b00 325 i2s2: audio-controller@4000b000 {
326 compatible = "st,stm32 326 compatible = "st,stm32h7-i2s";
327 reg = <0x4000b000 0x40 327 reg = <0x4000b000 0x400>;
328 #sound-dai-cells = <0> 328 #sound-dai-cells = <0>;
329 interrupts = <GIC_SPI 329 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
330 dmas = <&dmamux1 39 0x 330 dmas = <&dmamux1 39 0x400 0x01>,
331 <&dmamux1 40 0x 331 <&dmamux1 40 0x400 0x01>;
332 dma-names = "rx", "tx" 332 dma-names = "rx", "tx";
333 status = "disabled"; 333 status = "disabled";
334 }; 334 };
335 335
336 spi2: spi@4000b000 { 336 spi2: spi@4000b000 {
337 compatible = "st,stm32 337 compatible = "st,stm32h7-spi";
338 reg = <0x4000b000 0x40 338 reg = <0x4000b000 0x400>;
339 interrupts = <GIC_SPI 339 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
340 clocks = <&rcc SPI2_K> 340 clocks = <&rcc SPI2_K>;
341 resets = <&rcc SPI2_R> 341 resets = <&rcc SPI2_R>;
342 #address-cells = <1>; 342 #address-cells = <1>;
343 #size-cells = <0>; 343 #size-cells = <0>;
344 dmas = <&dmamux1 39 0x 344 dmas = <&dmamux1 39 0x400 0x01>,
345 <&dmamux1 40 0x 345 <&dmamux1 40 0x400 0x01>;
346 dma-names = "rx", "tx" 346 dma-names = "rx", "tx";
347 status = "disabled"; 347 status = "disabled";
348 }; 348 };
349 349
350 i2s3: audio-controller@4000c00 350 i2s3: audio-controller@4000c000 {
351 compatible = "st,stm32 351 compatible = "st,stm32h7-i2s";
352 reg = <0x4000c000 0x40 352 reg = <0x4000c000 0x400>;
353 #sound-dai-cells = <0> 353 #sound-dai-cells = <0>;
354 interrupts = <GIC_SPI 354 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
355 dmas = <&dmamux1 61 0x 355 dmas = <&dmamux1 61 0x400 0x01>,
356 <&dmamux1 62 0x 356 <&dmamux1 62 0x400 0x01>;
357 dma-names = "rx", "tx" 357 dma-names = "rx", "tx";
358 status = "disabled"; 358 status = "disabled";
359 }; 359 };
360 360
361 spi3: spi@4000c000 { 361 spi3: spi@4000c000 {
362 compatible = "st,stm32 362 compatible = "st,stm32h7-spi";
363 reg = <0x4000c000 0x40 363 reg = <0x4000c000 0x400>;
364 interrupts = <GIC_SPI 364 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
365 clocks = <&rcc SPI3_K> 365 clocks = <&rcc SPI3_K>;
366 resets = <&rcc SPI3_R> 366 resets = <&rcc SPI3_R>;
367 #address-cells = <1>; 367 #address-cells = <1>;
368 #size-cells = <0>; 368 #size-cells = <0>;
369 dmas = <&dmamux1 61 0x 369 dmas = <&dmamux1 61 0x400 0x01>,
370 <&dmamux1 62 0x 370 <&dmamux1 62 0x400 0x01>;
371 dma-names = "rx", "tx" 371 dma-names = "rx", "tx";
372 status = "disabled"; 372 status = "disabled";
373 }; 373 };
374 374
375 spdifrx: audio-controller@4000 375 spdifrx: audio-controller@4000d000 {
376 compatible = "st,stm32 376 compatible = "st,stm32h7-spdifrx";
377 reg = <0x4000d000 0x40 377 reg = <0x4000d000 0x400>;
378 #sound-dai-cells = <0> 378 #sound-dai-cells = <0>;
379 clocks = <&rcc SPDIF_K 379 clocks = <&rcc SPDIF_K>;
380 clock-names = "kclk"; 380 clock-names = "kclk";
381 interrupts = <GIC_SPI 381 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
382 dmas = <&dmamux1 93 0x 382 dmas = <&dmamux1 93 0x400 0x01>,
383 <&dmamux1 94 0x 383 <&dmamux1 94 0x400 0x01>;
384 dma-names = "rx", "rx- 384 dma-names = "rx", "rx-ctrl";
385 status = "disabled"; 385 status = "disabled";
386 }; 386 };
387 387
388 usart3: serial@4000f000 { 388 usart3: serial@4000f000 {
389 compatible = "st,stm32 389 compatible = "st,stm32h7-uart";
390 reg = <0x4000f000 0x40 390 reg = <0x4000f000 0x400>;
391 interrupts-extended = 391 interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
392 clocks = <&rcc USART3_ 392 clocks = <&rcc USART3_K>;
393 resets = <&rcc USART3_ 393 resets = <&rcc USART3_R>;
394 wakeup-source; 394 wakeup-source;
395 dmas = <&dmamux1 45 0x 395 dmas = <&dmamux1 45 0x400 0x5>,
396 <&dmamux1 46 0x 396 <&dmamux1 46 0x400 0x1>;
397 dma-names = "rx", "tx" 397 dma-names = "rx", "tx";
398 status = "disabled"; 398 status = "disabled";
399 }; 399 };
400 400
401 uart4: serial@40010000 { 401 uart4: serial@40010000 {
402 compatible = "st,stm32 402 compatible = "st,stm32h7-uart";
403 reg = <0x40010000 0x40 403 reg = <0x40010000 0x400>;
404 interrupts-extended = 404 interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
405 clocks = <&rcc UART4_K 405 clocks = <&rcc UART4_K>;
406 resets = <&rcc UART4_R 406 resets = <&rcc UART4_R>;
407 wakeup-source; 407 wakeup-source;
408 dmas = <&dmamux1 63 0x 408 dmas = <&dmamux1 63 0x400 0x5>,
409 <&dmamux1 64 0x 409 <&dmamux1 64 0x400 0x1>;
410 dma-names = "rx", "tx" 410 dma-names = "rx", "tx";
411 status = "disabled"; 411 status = "disabled";
412 }; 412 };
413 413
414 uart5: serial@40011000 { 414 uart5: serial@40011000 {
415 compatible = "st,stm32 415 compatible = "st,stm32h7-uart";
416 reg = <0x40011000 0x40 416 reg = <0x40011000 0x400>;
417 interrupts-extended = 417 interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
418 clocks = <&rcc UART5_K 418 clocks = <&rcc UART5_K>;
419 resets = <&rcc UART5_R 419 resets = <&rcc UART5_R>;
420 wakeup-source; 420 wakeup-source;
421 dmas = <&dmamux1 65 0x 421 dmas = <&dmamux1 65 0x400 0x5>,
422 <&dmamux1 66 0x 422 <&dmamux1 66 0x400 0x1>;
423 dma-names = "rx", "tx" 423 dma-names = "rx", "tx";
424 status = "disabled"; 424 status = "disabled";
425 }; 425 };
426 426
427 i2c1: i2c@40012000 { 427 i2c1: i2c@40012000 {
428 compatible = "st,stm32 428 compatible = "st,stm32mp13-i2c";
429 reg = <0x40012000 0x40 429 reg = <0x40012000 0x400>;
430 interrupt-names = "eve 430 interrupt-names = "event", "error";
431 interrupts = <GIC_SPI 431 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
432 <GIC_SPI 432 <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
433 clocks = <&rcc I2C1_K> 433 clocks = <&rcc I2C1_K>;
434 resets = <&rcc I2C1_R> 434 resets = <&rcc I2C1_R>;
435 #address-cells = <1>; 435 #address-cells = <1>;
436 #size-cells = <0>; 436 #size-cells = <0>;
437 dmas = <&dmamux1 33 0x 437 dmas = <&dmamux1 33 0x400 0x1>,
438 <&dmamux1 34 0x 438 <&dmamux1 34 0x400 0x1>;
439 dma-names = "rx", "tx" 439 dma-names = "rx", "tx";
440 st,syscfg-fmp = <&sysc 440 st,syscfg-fmp = <&syscfg 0x4 0x1>;
441 i2c-analog-filter; 441 i2c-analog-filter;
442 status = "disabled"; 442 status = "disabled";
443 }; 443 };
444 444
445 i2c2: i2c@40013000 { 445 i2c2: i2c@40013000 {
446 compatible = "st,stm32 446 compatible = "st,stm32mp13-i2c";
447 reg = <0x40013000 0x40 447 reg = <0x40013000 0x400>;
448 interrupt-names = "eve 448 interrupt-names = "event", "error";
449 interrupts = <GIC_SPI 449 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
450 <GIC_SPI 450 <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
451 clocks = <&rcc I2C2_K> 451 clocks = <&rcc I2C2_K>;
452 resets = <&rcc I2C2_R> 452 resets = <&rcc I2C2_R>;
453 #address-cells = <1>; 453 #address-cells = <1>;
454 #size-cells = <0>; 454 #size-cells = <0>;
455 dmas = <&dmamux1 35 0x 455 dmas = <&dmamux1 35 0x400 0x1>,
456 <&dmamux1 36 0x 456 <&dmamux1 36 0x400 0x1>;
457 dma-names = "rx", "tx" 457 dma-names = "rx", "tx";
458 st,syscfg-fmp = <&sysc 458 st,syscfg-fmp = <&syscfg 0x4 0x2>;
459 i2c-analog-filter; 459 i2c-analog-filter;
460 status = "disabled"; 460 status = "disabled";
461 }; 461 };
462 462
463 uart7: serial@40018000 { 463 uart7: serial@40018000 {
464 compatible = "st,stm32 464 compatible = "st,stm32h7-uart";
465 reg = <0x40018000 0x40 465 reg = <0x40018000 0x400>;
466 interrupts-extended = 466 interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
467 clocks = <&rcc UART7_K 467 clocks = <&rcc UART7_K>;
468 resets = <&rcc UART7_R 468 resets = <&rcc UART7_R>;
469 wakeup-source; 469 wakeup-source;
470 dmas = <&dmamux1 79 0x 470 dmas = <&dmamux1 79 0x400 0x5>,
471 <&dmamux1 80 0x 471 <&dmamux1 80 0x400 0x1>;
472 dma-names = "rx", "tx" 472 dma-names = "rx", "tx";
473 status = "disabled"; 473 status = "disabled";
474 }; 474 };
475 475
476 uart8: serial@40019000 { 476 uart8: serial@40019000 {
477 compatible = "st,stm32 477 compatible = "st,stm32h7-uart";
478 reg = <0x40019000 0x40 478 reg = <0x40019000 0x400>;
479 interrupts-extended = 479 interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
480 clocks = <&rcc UART8_K 480 clocks = <&rcc UART8_K>;
481 resets = <&rcc UART8_R 481 resets = <&rcc UART8_R>;
482 wakeup-source; 482 wakeup-source;
483 dmas = <&dmamux1 81 0x 483 dmas = <&dmamux1 81 0x400 0x5>,
484 <&dmamux1 82 0x 484 <&dmamux1 82 0x400 0x1>;
485 dma-names = "rx", "tx" 485 dma-names = "rx", "tx";
486 status = "disabled"; 486 status = "disabled";
487 }; 487 };
488 488
489 timers1: timer@44000000 { 489 timers1: timer@44000000 {
490 #address-cells = <1>; 490 #address-cells = <1>;
491 #size-cells = <0>; 491 #size-cells = <0>;
492 compatible = "st,stm32 492 compatible = "st,stm32-timers";
493 reg = <0x44000000 0x40 493 reg = <0x44000000 0x400>;
494 interrupts = <GIC_SPI 494 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
495 <GIC_SPI 495 <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
496 <GIC_SPI 496 <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
497 <GIC_SPI 497 <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
498 interrupt-names = "brk 498 interrupt-names = "brk", "up", "trg-com", "cc";
499 clocks = <&rcc TIM1_K> 499 clocks = <&rcc TIM1_K>;
500 clock-names = "int"; 500 clock-names = "int";
501 dmas = <&dmamux1 11 0x 501 dmas = <&dmamux1 11 0x400 0x1>,
502 <&dmamux1 12 0x 502 <&dmamux1 12 0x400 0x1>,
503 <&dmamux1 13 0x 503 <&dmamux1 13 0x400 0x1>,
504 <&dmamux1 14 0x 504 <&dmamux1 14 0x400 0x1>,
505 <&dmamux1 15 0x 505 <&dmamux1 15 0x400 0x1>,
506 <&dmamux1 16 0x 506 <&dmamux1 16 0x400 0x1>,
507 <&dmamux1 17 0x 507 <&dmamux1 17 0x400 0x1>;
508 dma-names = "ch1", "ch 508 dma-names = "ch1", "ch2", "ch3", "ch4",
509 "up", "tri 509 "up", "trig", "com";
510 status = "disabled"; 510 status = "disabled";
511 511
512 pwm { 512 pwm {
513 compatible = " 513 compatible = "st,stm32-pwm";
514 #pwm-cells = < 514 #pwm-cells = <3>;
515 status = "disa 515 status = "disabled";
516 }; 516 };
517 517
518 timer@0 { 518 timer@0 {
519 compatible = " 519 compatible = "st,stm32h7-timer-trigger";
520 reg = <0>; 520 reg = <0>;
521 status = "disa 521 status = "disabled";
522 }; 522 };
523 523
524 counter { 524 counter {
525 compatible = " 525 compatible = "st,stm32-timer-counter";
526 status = "disa 526 status = "disabled";
527 }; 527 };
528 }; 528 };
529 529
530 timers8: timer@44001000 { 530 timers8: timer@44001000 {
531 #address-cells = <1>; 531 #address-cells = <1>;
532 #size-cells = <0>; 532 #size-cells = <0>;
533 compatible = "st,stm32 533 compatible = "st,stm32-timers";
534 reg = <0x44001000 0x40 534 reg = <0x44001000 0x400>;
535 interrupts = <GIC_SPI 535 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
536 <GIC_SPI 536 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
537 <GIC_SPI 537 <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
538 <GIC_SPI 538 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
539 interrupt-names = "brk 539 interrupt-names = "brk", "up", "trg-com", "cc";
540 clocks = <&rcc TIM8_K> 540 clocks = <&rcc TIM8_K>;
541 clock-names = "int"; 541 clock-names = "int";
542 dmas = <&dmamux1 47 0x 542 dmas = <&dmamux1 47 0x400 0x1>,
543 <&dmamux1 48 0x 543 <&dmamux1 48 0x400 0x1>,
544 <&dmamux1 49 0x 544 <&dmamux1 49 0x400 0x1>,
545 <&dmamux1 50 0x 545 <&dmamux1 50 0x400 0x1>,
546 <&dmamux1 51 0x 546 <&dmamux1 51 0x400 0x1>,
547 <&dmamux1 52 0x 547 <&dmamux1 52 0x400 0x1>,
548 <&dmamux1 53 0x 548 <&dmamux1 53 0x400 0x1>;
549 dma-names = "ch1", "ch 549 dma-names = "ch1", "ch2", "ch3", "ch4",
550 "up", "tri 550 "up", "trig", "com";
551 status = "disabled"; 551 status = "disabled";
552 552
553 pwm { 553 pwm {
554 compatible = " 554 compatible = "st,stm32-pwm";
555 #pwm-cells = < 555 #pwm-cells = <3>;
556 status = "disa 556 status = "disabled";
557 }; 557 };
558 558
559 timer@7 { 559 timer@7 {
560 compatible = " 560 compatible = "st,stm32h7-timer-trigger";
561 reg = <7>; 561 reg = <7>;
562 status = "disa 562 status = "disabled";
563 }; 563 };
564 564
565 counter { 565 counter {
566 compatible = " 566 compatible = "st,stm32-timer-counter";
567 status = "disa 567 status = "disabled";
568 }; 568 };
569 }; 569 };
570 570
571 usart6: serial@44003000 { 571 usart6: serial@44003000 {
572 compatible = "st,stm32 572 compatible = "st,stm32h7-uart";
573 reg = <0x44003000 0x40 573 reg = <0x44003000 0x400>;
574 interrupts-extended = 574 interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
575 clocks = <&rcc USART6_ 575 clocks = <&rcc USART6_K>;
576 resets = <&rcc USART6_ 576 resets = <&rcc USART6_R>;
577 wakeup-source; 577 wakeup-source;
578 dmas = <&dmamux1 71 0x 578 dmas = <&dmamux1 71 0x400 0x5>,
579 <&dmamux1 72 0x 579 <&dmamux1 72 0x400 0x1>;
580 dma-names = "rx", "tx" 580 dma-names = "rx", "tx";
581 status = "disabled"; 581 status = "disabled";
582 }; 582 };
583 583
584 i2s1: audio-controller@4400400 584 i2s1: audio-controller@44004000 {
585 compatible = "st,stm32 585 compatible = "st,stm32h7-i2s";
586 reg = <0x44004000 0x40 586 reg = <0x44004000 0x400>;
587 #sound-dai-cells = <0> 587 #sound-dai-cells = <0>;
588 interrupts = <GIC_SPI 588 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
589 dmas = <&dmamux1 37 0x 589 dmas = <&dmamux1 37 0x400 0x01>,
590 <&dmamux1 38 0x 590 <&dmamux1 38 0x400 0x01>;
591 dma-names = "rx", "tx" 591 dma-names = "rx", "tx";
592 status = "disabled"; 592 status = "disabled";
593 }; 593 };
594 594
595 spi1: spi@44004000 { 595 spi1: spi@44004000 {
596 compatible = "st,stm32 596 compatible = "st,stm32h7-spi";
597 reg = <0x44004000 0x40 597 reg = <0x44004000 0x400>;
598 interrupts = <GIC_SPI 598 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
599 clocks = <&rcc SPI1_K> 599 clocks = <&rcc SPI1_K>;
600 resets = <&rcc SPI1_R> 600 resets = <&rcc SPI1_R>;
601 #address-cells = <1>; 601 #address-cells = <1>;
602 #size-cells = <0>; 602 #size-cells = <0>;
603 dmas = <&dmamux1 37 0x 603 dmas = <&dmamux1 37 0x400 0x01>,
604 <&dmamux1 38 0x 604 <&dmamux1 38 0x400 0x01>;
605 dma-names = "rx", "tx" 605 dma-names = "rx", "tx";
606 status = "disabled"; 606 status = "disabled";
607 }; 607 };
608 608
609 sai1: sai@4400a000 { 609 sai1: sai@4400a000 {
610 compatible = "st,stm32 610 compatible = "st,stm32h7-sai";
611 reg = <0x4400a000 0x4> 611 reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
612 ranges = <0 0x4400a000 612 ranges = <0 0x4400a000 0x400>;
613 #address-cells = <1>; 613 #address-cells = <1>;
614 #size-cells = <1>; 614 #size-cells = <1>;
615 interrupts = <GIC_SPI 615 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
616 resets = <&rcc SAI1_R> 616 resets = <&rcc SAI1_R>;
617 status = "disabled"; 617 status = "disabled";
618 618
619 sai1a: audio-controlle 619 sai1a: audio-controller@4400a004 {
620 compatible = " 620 compatible = "st,stm32-sai-sub-a";
621 reg = <0x4 0x2 621 reg = <0x4 0x20>;
622 #sound-dai-cel 622 #sound-dai-cells = <0>;
623 clocks = <&rcc 623 clocks = <&rcc SAI1_K>;
624 clock-names = 624 clock-names = "sai_ck";
625 dmas = <&dmamu 625 dmas = <&dmamux1 87 0x400 0x01>;
626 status = "disa 626 status = "disabled";
627 }; 627 };
628 628
629 sai1b: audio-controlle 629 sai1b: audio-controller@4400a024 {
630 compatible = " 630 compatible = "st,stm32-sai-sub-b";
631 reg = <0x24 0x 631 reg = <0x24 0x20>;
632 #sound-dai-cel 632 #sound-dai-cells = <0>;
633 clocks = <&rcc 633 clocks = <&rcc SAI1_K>;
634 clock-names = 634 clock-names = "sai_ck";
635 dmas = <&dmamu 635 dmas = <&dmamux1 88 0x400 0x01>;
636 status = "disa 636 status = "disabled";
637 }; 637 };
638 }; 638 };
639 639
640 sai2: sai@4400b000 { 640 sai2: sai@4400b000 {
641 compatible = "st,stm32 641 compatible = "st,stm32h7-sai";
642 reg = <0x4400b000 0x4> 642 reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
643 ranges = <0 0x4400b000 643 ranges = <0 0x4400b000 0x400>;
644 #address-cells = <1>; 644 #address-cells = <1>;
645 #size-cells = <1>; 645 #size-cells = <1>;
646 interrupts = <GIC_SPI 646 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
647 resets = <&rcc SAI2_R> 647 resets = <&rcc SAI2_R>;
648 status = "disabled"; 648 status = "disabled";
649 649
650 sai2a: audio-controlle 650 sai2a: audio-controller@4400b004 {
651 compatible = " 651 compatible = "st,stm32-sai-sub-a";
652 reg = <0x4 0x2 652 reg = <0x4 0x20>;
653 #sound-dai-cel 653 #sound-dai-cells = <0>;
654 clocks = <&rcc 654 clocks = <&rcc SAI2_K>;
655 clock-names = 655 clock-names = "sai_ck";
656 dmas = <&dmamu 656 dmas = <&dmamux1 89 0x400 0x01>;
657 status = "disa 657 status = "disabled";
658 }; 658 };
659 659
660 sai2b: audio-controlle 660 sai2b: audio-controller@4400b024 {
661 compatible = " 661 compatible = "st,stm32-sai-sub-b";
662 reg = <0x24 0x 662 reg = <0x24 0x20>;
663 #sound-dai-cel 663 #sound-dai-cells = <0>;
664 clocks = <&rcc 664 clocks = <&rcc SAI2_K>;
665 clock-names = 665 clock-names = "sai_ck";
666 dmas = <&dmamu 666 dmas = <&dmamux1 90 0x400 0x01>;
667 status = "disa 667 status = "disabled";
668 }; 668 };
669 }; 669 };
670 670
671 dfsdm: dfsdm@4400d000 { 671 dfsdm: dfsdm@4400d000 {
672 compatible = "st,stm32 672 compatible = "st,stm32mp1-dfsdm";
673 reg = <0x4400d000 0x80 673 reg = <0x4400d000 0x800>;
674 clocks = <&rcc DFSDM_K 674 clocks = <&rcc DFSDM_K>;
675 clock-names = "dfsdm"; 675 clock-names = "dfsdm";
676 #address-cells = <1>; 676 #address-cells = <1>;
677 #size-cells = <0>; 677 #size-cells = <0>;
678 status = "disabled"; 678 status = "disabled";
679 679
680 dfsdm0: filter@0 { 680 dfsdm0: filter@0 {
681 compatible = " 681 compatible = "st,stm32-dfsdm-adc";
682 reg = <0>; 682 reg = <0>;
683 #io-channel-ce 683 #io-channel-cells = <1>;
684 interrupts = < 684 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
685 dmas = <&dmamu 685 dmas = <&dmamux1 101 0x400 0x01>;
686 dma-names = "r 686 dma-names = "rx";
687 status = "disa 687 status = "disabled";
688 }; 688 };
689 689
690 dfsdm1: filter@1 { 690 dfsdm1: filter@1 {
691 compatible = " 691 compatible = "st,stm32-dfsdm-adc";
692 reg = <1>; 692 reg = <1>;
693 #io-channel-ce 693 #io-channel-cells = <1>;
694 interrupts = < 694 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
695 dmas = <&dmamu 695 dmas = <&dmamux1 102 0x400 0x01>;
696 dma-names = "r 696 dma-names = "rx";
697 status = "disa 697 status = "disabled";
698 }; 698 };
699 }; 699 };
700 700
701 dma1: dma-controller@48000000 701 dma1: dma-controller@48000000 {
702 compatible = "st,stm32 702 compatible = "st,stm32-dma";
703 reg = <0x48000000 0x40 703 reg = <0x48000000 0x400>;
704 interrupts = <GIC_SPI 704 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
705 <GIC_SPI 705 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
706 <GIC_SPI 706 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
707 <GIC_SPI 707 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
708 <GIC_SPI 708 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
709 <GIC_SPI 709 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
710 <GIC_SPI 710 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
711 <GIC_SPI 711 <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
712 clocks = <&rcc DMA1>; 712 clocks = <&rcc DMA1>;
713 resets = <&rcc DMA1_R> 713 resets = <&rcc DMA1_R>;
714 #dma-cells = <4>; 714 #dma-cells = <4>;
715 st,mem2mem; 715 st,mem2mem;
716 dma-requests = <8>; 716 dma-requests = <8>;
717 }; 717 };
718 718
719 dma2: dma-controller@48001000 719 dma2: dma-controller@48001000 {
720 compatible = "st,stm32 720 compatible = "st,stm32-dma";
721 reg = <0x48001000 0x40 721 reg = <0x48001000 0x400>;
722 interrupts = <GIC_SPI 722 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
723 <GIC_SPI 723 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
724 <GIC_SPI 724 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
725 <GIC_SPI 725 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
726 <GIC_SPI 726 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
727 <GIC_SPI 727 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
728 <GIC_SPI 728 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
729 <GIC_SPI 729 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
730 clocks = <&rcc DMA2>; 730 clocks = <&rcc DMA2>;
731 resets = <&rcc DMA2_R> 731 resets = <&rcc DMA2_R>;
732 #dma-cells = <4>; 732 #dma-cells = <4>;
733 st,mem2mem; 733 st,mem2mem;
734 dma-requests = <8>; 734 dma-requests = <8>;
735 }; 735 };
736 736
737 dmamux1: dma-router@48002000 { 737 dmamux1: dma-router@48002000 {
738 compatible = "st,stm32 738 compatible = "st,stm32h7-dmamux";
739 reg = <0x48002000 0x40 739 reg = <0x48002000 0x40>;
740 clocks = <&rcc DMAMUX1 740 clocks = <&rcc DMAMUX1>;
741 resets = <&rcc DMAMUX1 741 resets = <&rcc DMAMUX1_R>;
742 #dma-cells = <3>; 742 #dma-cells = <3>;
743 dma-masters = <&dma1 & 743 dma-masters = <&dma1 &dma2>;
744 dma-requests = <128>; 744 dma-requests = <128>;
745 dma-channels = <16>; 745 dma-channels = <16>;
746 }; 746 };
747 747
748 rcc: rcc@50000000 { 748 rcc: rcc@50000000 {
749 compatible = "st,stm32 749 compatible = "st,stm32mp13-rcc", "syscon";
750 reg = <0x50000000 0x10 750 reg = <0x50000000 0x1000>;
751 #clock-cells = <1>; 751 #clock-cells = <1>;
752 #reset-cells = <1>; 752 #reset-cells = <1>;
753 clock-names = "hse", " 753 clock-names = "hse", "hsi", "csi", "lse", "lsi";
754 clocks = <&scmi_clk CK 754 clocks = <&scmi_clk CK_SCMI_HSE>,
755 <&scmi_clk CK 755 <&scmi_clk CK_SCMI_HSI>,
756 <&scmi_clk CK 756 <&scmi_clk CK_SCMI_CSI>,
757 <&scmi_clk CK 757 <&scmi_clk CK_SCMI_LSE>,
758 <&scmi_clk CK 758 <&scmi_clk CK_SCMI_LSI>;
759 }; 759 };
760 760
761 pwr_regulators: pwr@50001000 { 761 pwr_regulators: pwr@50001000 {
762 compatible = "st,stm32 762 compatible = "st,stm32mp1,pwr-reg";
763 reg = <0x50001000 0x10 763 reg = <0x50001000 0x10>;
764 status = "disabled"; 764 status = "disabled";
765 765
766 reg11: reg11 { 766 reg11: reg11 {
767 regulator-name 767 regulator-name = "reg11";
768 regulator-min- 768 regulator-min-microvolt = <1100000>;
769 regulator-max- 769 regulator-max-microvolt = <1100000>;
770 }; 770 };
771 771
772 reg18: reg18 { 772 reg18: reg18 {
773 regulator-name 773 regulator-name = "reg18";
774 regulator-min- 774 regulator-min-microvolt = <1800000>;
775 regulator-max- 775 regulator-max-microvolt = <1800000>;
776 }; 776 };
777 777
778 usb33: usb33 { 778 usb33: usb33 {
779 regulator-name 779 regulator-name = "usb33";
780 regulator-min- 780 regulator-min-microvolt = <3300000>;
781 regulator-max- 781 regulator-max-microvolt = <3300000>;
782 }; 782 };
783 }; 783 };
784 784
785 exti: interrupt-controller@500 785 exti: interrupt-controller@5000d000 {
786 compatible = "st,stm32 786 compatible = "st,stm32mp1-exti", "syscon";
787 interrupt-controller; 787 interrupt-controller;
788 #interrupt-cells = <2> 788 #interrupt-cells = <2>;
789 reg = <0x5000d000 0x40 789 reg = <0x5000d000 0x400>;
790 interrupts-extended = 790 interrupts-extended =
791 <&intc GIC_SPI 791 <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_0 */
792 <&intc GIC_SPI 792 <&intc GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
793 <&intc GIC_SPI 793 <&intc GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
794 <&intc GIC_SPI 794 <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
795 <&intc GIC_SPI 795 <&intc GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
796 <&intc GIC_SPI 796 <&intc GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
797 <&intc GIC_SPI 797 <&intc GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
798 <&intc GIC_SPI 798 <&intc GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
799 <&intc GIC_SPI 799 <&intc GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
800 <&intc GIC_SPI 800 <&intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
801 <&intc GIC_SPI 801 <&intc GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_10 */
802 <&intc GIC_SPI 802 <&intc GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
803 <&intc GIC_SPI 803 <&intc GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
804 <&intc GIC_SPI 804 <&intc GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
805 <&intc GIC_SPI 805 <&intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
806 <&intc GIC_SPI 806 <&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
807 <&intc GIC_SPI 807 <&intc GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
808 <0>, 808 <0>,
809 <0>, 809 <0>,
810 <&intc GIC_SPI 810 <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
811 <0>, 811 <0>, /* EXTI_20 */
812 <&intc GIC_SPI 812 <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
813 <&intc GIC_SPI 813 <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
814 <&intc GIC_SPI 814 <&intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
815 <&intc GIC_SPI 815 <&intc GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
816 <&intc GIC_SPI 816 <&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
817 <&intc GIC_SPI 817 <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
818 <&intc GIC_SPI 818 <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
819 <&intc GIC_SPI 819 <&intc GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
820 <&intc GIC_SPI 820 <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
821 <&intc GIC_SPI 821 <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_30 */
822 <&intc GIC_SPI 822 <&intc GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
823 <&intc GIC_SPI 823 <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
824 <&intc GIC_SPI 824 <&intc GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
825 <0>, 825 <0>,
826 <0>, 826 <0>,
827 <0>, 827 <0>,
828 <0>, 828 <0>,
829 <0>, 829 <0>,
830 <0>, 830 <0>,
831 <0>, 831 <0>, /* EXTI_40 */
832 <0>, 832 <0>,
833 <0>, 833 <0>,
834 <0>, 834 <0>,
835 <&intc GIC_SPI 835 <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
836 <0>, 836 <0>,
837 <0>, 837 <0>,
838 <&intc GIC_SPI 838 <&intc GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
839 <&intc GIC_SPI 839 <&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
840 <0>, 840 <0>,
841 <&intc GIC_SPI 841 <&intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* EXTI_50 */
842 <0>, 842 <0>,
843 <&intc GIC_SPI 843 <&intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
844 <&intc GIC_SPI 844 <&intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
845 <0>, 845 <0>,
846 <0>, 846 <0>,
847 <0>, 847 <0>,
848 <0>, 848 <0>,
849 <0>, 849 <0>,
850 <0>, 850 <0>,
851 <0>, 851 <0>, /* EXTI_60 */
852 <0>, 852 <0>,
853 <0>, 853 <0>,
854 <0>, 854 <0>,
855 <0>, 855 <0>,
856 <0>, 856 <0>,
857 <0>, 857 <0>,
858 <0>, 858 <0>,
859 <&intc GIC_SPI 859 <&intc GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
860 <0>, 860 <0>,
861 <&intc GIC_SPI 861 <&intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* EXTI_70 */
862 }; 862 };
863 863
864 syscfg: syscon@50020000 { 864 syscfg: syscon@50020000 {
865 compatible = "st,stm32 865 compatible = "st,stm32mp157-syscfg", "syscon";
866 reg = <0x50020000 0x40 866 reg = <0x50020000 0x400>;
867 clocks = <&rcc SYSCFG> 867 clocks = <&rcc SYSCFG>;
868 }; 868 };
869 869
870 lptimer4: timer@50023000 { 870 lptimer4: timer@50023000 {
871 compatible = "st,stm32 871 compatible = "st,stm32-lptimer";
872 reg = <0x50023000 0x40 872 reg = <0x50023000 0x400>;
873 interrupts-extended = 873 interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
874 clocks = <&rcc LPTIM4_ 874 clocks = <&rcc LPTIM4_K>;
875 clock-names = "mux"; 875 clock-names = "mux";
876 wakeup-source; 876 wakeup-source;
877 status = "disabled"; 877 status = "disabled";
878 878
879 pwm { 879 pwm {
880 compatible = " 880 compatible = "st,stm32-pwm-lp";
881 #pwm-cells = < 881 #pwm-cells = <3>;
882 status = "disa 882 status = "disabled";
883 }; 883 };
884 884
885 timer { 885 timer {
886 compatible = " 886 compatible = "st,stm32-lptimer-timer";
887 status = "disa 887 status = "disabled";
888 }; 888 };
889 }; 889 };
890 890
891 lptimer5: timer@50024000 { 891 lptimer5: timer@50024000 {
892 compatible = "st,stm32 892 compatible = "st,stm32-lptimer";
893 reg = <0x50024000 0x40 893 reg = <0x50024000 0x400>;
894 interrupts-extended = 894 interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
895 clocks = <&rcc LPTIM5_ 895 clocks = <&rcc LPTIM5_K>;
896 clock-names = "mux"; 896 clock-names = "mux";
897 wakeup-source; 897 wakeup-source;
898 status = "disabled"; 898 status = "disabled";
899 899
900 pwm { 900 pwm {
901 compatible = " 901 compatible = "st,stm32-pwm-lp";
902 #pwm-cells = < 902 #pwm-cells = <3>;
903 status = "disa 903 status = "disabled";
904 }; 904 };
905 905
906 timer { 906 timer {
907 compatible = " 907 compatible = "st,stm32-lptimer-timer";
908 status = "disa 908 status = "disabled";
909 }; 909 };
910 }; 910 };
911 911
912 mdma: dma-controller@58000000 912 mdma: dma-controller@58000000 {
913 compatible = "st,stm32 913 compatible = "st,stm32h7-mdma";
914 reg = <0x58000000 0x10 914 reg = <0x58000000 0x1000>;
915 interrupts = <GIC_SPI 915 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
916 clocks = <&rcc MDMA>; 916 clocks = <&rcc MDMA>;
917 #dma-cells = <5>; 917 #dma-cells = <5>;
918 dma-channels = <32>; 918 dma-channels = <32>;
919 dma-requests = <48>; 919 dma-requests = <48>;
920 }; 920 };
921 921
922 crc1: crc@58009000 { 922 crc1: crc@58009000 {
923 compatible = "st,stm32 923 compatible = "st,stm32f7-crc";
924 reg = <0x58009000 0x40 924 reg = <0x58009000 0x400>;
925 clocks = <&rcc CRC1>; 925 clocks = <&rcc CRC1>;
926 status = "disabled"; 926 status = "disabled";
927 }; 927 };
928 928
929 usbh_ohci: usb@5800c000 { 929 usbh_ohci: usb@5800c000 {
930 compatible = "generic- 930 compatible = "generic-ohci";
931 reg = <0x5800c000 0x10 931 reg = <0x5800c000 0x1000>;
932 clocks = <&usbphyc>, < 932 clocks = <&usbphyc>, <&rcc USBH>;
933 resets = <&rcc USBH_R> 933 resets = <&rcc USBH_R>;
934 interrupts = <GIC_SPI 934 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
935 status = "disabled"; 935 status = "disabled";
936 }; 936 };
937 937
938 usbh_ehci: usb@5800d000 { 938 usbh_ehci: usb@5800d000 {
939 compatible = "generic- 939 compatible = "generic-ehci";
940 reg = <0x5800d000 0x10 940 reg = <0x5800d000 0x1000>;
941 clocks = <&usbphyc>, < 941 clocks = <&usbphyc>, <&rcc USBH>;
942 resets = <&rcc USBH_R> 942 resets = <&rcc USBH_R>;
943 interrupts = <GIC_SPI 943 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
944 companion = <&usbh_ohc 944 companion = <&usbh_ohci>;
945 status = "disabled"; 945 status = "disabled";
946 }; 946 };
947 947
948 iwdg2: watchdog@5a002000 { 948 iwdg2: watchdog@5a002000 {
949 compatible = "st,stm32 949 compatible = "st,stm32mp1-iwdg";
950 reg = <0x5a002000 0x40 950 reg = <0x5a002000 0x400>;
951 clocks = <&rcc IWDG2>, 951 clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
952 clock-names = "pclk", 952 clock-names = "pclk", "lsi";
953 status = "disabled"; 953 status = "disabled";
954 }; 954 };
955 955
956 rtc: rtc@5c004000 { 956 rtc: rtc@5c004000 {
957 compatible = "st,stm32 957 compatible = "st,stm32mp1-rtc";
958 reg = <0x5c004000 0x40 958 reg = <0x5c004000 0x400>;
959 interrupts-extended = 959 interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
960 clocks = <&scmi_clk CK 960 clocks = <&scmi_clk CK_SCMI_RTCAPB>,
961 <&scmi_clk CK 961 <&scmi_clk CK_SCMI_RTC>;
962 clock-names = "pclk", 962 clock-names = "pclk", "rtc_ck";
963 status = "disabled"; 963 status = "disabled";
964 }; 964 };
965 965
966 bsec: efuse@5c005000 { 966 bsec: efuse@5c005000 {
967 compatible = "st,stm32 967 compatible = "st,stm32mp13-bsec";
968 reg = <0x5c005000 0x40 968 reg = <0x5c005000 0x400>;
969 #address-cells = <1>; 969 #address-cells = <1>;
970 #size-cells = <1>; 970 #size-cells = <1>;
971 971
972 part_number_otp: part_ 972 part_number_otp: part_number_otp@4 {
973 reg = <0x4 0x2 973 reg = <0x4 0x2>;
974 bits = <0 12>; 974 bits = <0 12>;
975 }; 975 };
976 ts_cal1: calib@5c { 976 ts_cal1: calib@5c {
977 reg = <0x5c 0x 977 reg = <0x5c 0x2>;
978 }; 978 };
979 ts_cal2: calib@5e { 979 ts_cal2: calib@5e {
980 reg = <0x5e 0x 980 reg = <0x5e 0x2>;
981 }; 981 };
982 ethernet_mac1_address: <<
983 reg = <0xe4 0x <<
984 }; <<
985 ethernet_mac2_address: <<
986 reg = <0xea 0x <<
987 }; <<
988 }; 982 };
989 983
990 etzpc: bus@5c007000 { 984 etzpc: bus@5c007000 {
991 compatible = "st,stm32 985 compatible = "st,stm32-etzpc", "simple-bus";
992 reg = <0x5c007000 0x40 986 reg = <0x5c007000 0x400>;
993 #address-cells = <1>; 987 #address-cells = <1>;
994 #size-cells = <1>; 988 #size-cells = <1>;
995 #access-controller-cel 989 #access-controller-cells = <1>;
996 ranges; 990 ranges;
997 991
998 adc_2: adc@48004000 { 992 adc_2: adc@48004000 {
999 compatible = " 993 compatible = "st,stm32mp13-adc-core";
1000 reg = <0x4800 994 reg = <0x48004000 0x400>;
1001 interrupts = 995 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
1002 clocks = <&rc 996 clocks = <&rcc ADC2>, <&rcc ADC2_K>;
1003 clock-names = 997 clock-names = "bus", "adc";
1004 interrupt-con 998 interrupt-controller;
1005 #interrupt-ce 999 #interrupt-cells = <1>;
1006 #address-cell 1000 #address-cells = <1>;
1007 #size-cells = 1001 #size-cells = <0>;
1008 access-contro 1002 access-controllers = <&etzpc 33>;
1009 status = "dis 1003 status = "disabled";
1010 1004
1011 adc2: adc@0 { 1005 adc2: adc@0 {
1012 compa 1006 compatible = "st,stm32mp13-adc";
1013 #io-c 1007 #io-channel-cells = <1>;
1014 #addr 1008 #address-cells = <1>;
1015 #size 1009 #size-cells = <0>;
1016 reg = 1010 reg = <0x0>;
1017 inter 1011 interrupt-parent = <&adc_2>;
1018 inter 1012 interrupts = <0>;
1019 dmas 1013 dmas = <&dmamux1 10 0x400 0x80000001>;
1020 dma-n 1014 dma-names = "rx";
1021 statu 1015 status = "disabled";
1022 1016
1023 chann 1017 channel@13 {
1024 1018 reg = <13>;
1025 1019 label = "vrefint";
1026 }; 1020 };
1027 chann 1021 channel@14 {
1028 1022 reg = <14>;
1029 1023 label = "vddcore";
1030 }; 1024 };
1031 chann 1025 channel@16 {
1032 1026 reg = <16>;
1033 1027 label = "vddcpu";
1034 }; 1028 };
1035 chann 1029 channel@17 {
1036 1030 reg = <17>;
1037 1031 label = "vddq_ddr";
1038 }; 1032 };
1039 }; 1033 };
1040 }; 1034 };
1041 1035
1042 usbotg_hs: usb@490000 1036 usbotg_hs: usb@49000000 {
1043 compatible = 1037 compatible = "st,stm32mp15-hsotg", "snps,dwc2";
1044 reg = <0x4900 1038 reg = <0x49000000 0x40000>;
1045 clocks = <&rc 1039 clocks = <&rcc USBO_K>;
1046 clock-names = 1040 clock-names = "otg";
1047 resets = <&rc 1041 resets = <&rcc USBO_R>;
1048 reset-names = 1042 reset-names = "dwc2";
1049 interrupts = 1043 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1050 g-rx-fifo-siz 1044 g-rx-fifo-size = <512>;
1051 g-np-tx-fifo- 1045 g-np-tx-fifo-size = <32>;
1052 g-tx-fifo-siz 1046 g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
1053 dr_mode = "ot 1047 dr_mode = "otg";
1054 otg-rev = <0x 1048 otg-rev = <0x200>;
1055 usb33d-supply 1049 usb33d-supply = <&scmi_usb33>;
1056 access-contro 1050 access-controllers = <&etzpc 34>;
1057 status = "dis 1051 status = "disabled";
1058 }; 1052 };
1059 1053
1060 usart1: serial@4c0000 1054 usart1: serial@4c000000 {
1061 compatible = 1055 compatible = "st,stm32h7-uart";
1062 reg = <0x4c00 1056 reg = <0x4c000000 0x400>;
1063 interrupts-ex 1057 interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
1064 clocks = <&rc 1058 clocks = <&rcc USART1_K>;
1065 resets = <&rc 1059 resets = <&rcc USART1_R>;
1066 wakeup-source 1060 wakeup-source;
1067 dmas = <&dmam 1061 dmas = <&dmamux1 41 0x400 0x5>,
1068 <&dmamux1 42 1062 <&dmamux1 42 0x400 0x1>;
1069 dma-names = " 1063 dma-names = "rx", "tx";
1070 access-contro 1064 access-controllers = <&etzpc 16>;
1071 status = "dis 1065 status = "disabled";
1072 }; 1066 };
1073 1067
1074 usart2: serial@4c0010 1068 usart2: serial@4c001000 {
1075 compatible = 1069 compatible = "st,stm32h7-uart";
1076 reg = <0x4c00 1070 reg = <0x4c001000 0x400>;
1077 interrupts-ex 1071 interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
1078 clocks = <&rc 1072 clocks = <&rcc USART2_K>;
1079 resets = <&rc 1073 resets = <&rcc USART2_R>;
1080 wakeup-source 1074 wakeup-source;
1081 dmas = <&dmam 1075 dmas = <&dmamux1 43 0x400 0x5>,
1082 <&dmamux1 44 1076 <&dmamux1 44 0x400 0x1>;
1083 dma-names = " 1077 dma-names = "rx", "tx";
1084 access-contro 1078 access-controllers = <&etzpc 17>;
1085 status = "dis 1079 status = "disabled";
1086 }; 1080 };
1087 1081
1088 i2s4: audio-controlle 1082 i2s4: audio-controller@4c002000 {
1089 compatible = 1083 compatible = "st,stm32h7-i2s";
1090 reg = <0x4c00 1084 reg = <0x4c002000 0x400>;
1091 #sound-dai-ce 1085 #sound-dai-cells = <0>;
1092 interrupts = 1086 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1093 dmas = <&dmam 1087 dmas = <&dmamux1 83 0x400 0x01>,
1094 <&dmamux1 84 1088 <&dmamux1 84 0x400 0x01>;
1095 dma-names = " 1089 dma-names = "rx", "tx";
1096 access-contro 1090 access-controllers = <&etzpc 13>;
1097 status = "dis 1091 status = "disabled";
1098 }; 1092 };
1099 1093
1100 spi4: spi@4c002000 { 1094 spi4: spi@4c002000 {
1101 compatible = 1095 compatible = "st,stm32h7-spi";
1102 reg = <0x4c00 1096 reg = <0x4c002000 0x400>;
1103 interrupts = 1097 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1104 clocks = <&rc 1098 clocks = <&rcc SPI4_K>;
1105 resets = <&rc 1099 resets = <&rcc SPI4_R>;
1106 #address-cell 1100 #address-cells = <1>;
1107 #size-cells = 1101 #size-cells = <0>;
1108 dmas = <&dmam 1102 dmas = <&dmamux1 83 0x400 0x01>,
1109 <&dmam 1103 <&dmamux1 84 0x400 0x01>;
1110 dma-names = " 1104 dma-names = "rx", "tx";
1111 access-contro 1105 access-controllers = <&etzpc 18>;
1112 status = "dis 1106 status = "disabled";
1113 }; 1107 };
1114 1108
1115 spi5: spi@4c003000 { 1109 spi5: spi@4c003000 {
1116 compatible = 1110 compatible = "st,stm32h7-spi";
1117 reg = <0x4c00 1111 reg = <0x4c003000 0x400>;
1118 interrupts = 1112 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1119 clocks = <&rc 1113 clocks = <&rcc SPI5_K>;
1120 resets = <&rc 1114 resets = <&rcc SPI5_R>;
1121 #address-cell 1115 #address-cells = <1>;
1122 #size-cells = 1116 #size-cells = <0>;
1123 dmas = <&dmam 1117 dmas = <&dmamux1 85 0x400 0x01>,
1124 <&dmam 1118 <&dmamux1 86 0x400 0x01>;
1125 dma-names = " 1119 dma-names = "rx", "tx";
1126 access-contro 1120 access-controllers = <&etzpc 19>;
1127 status = "dis 1121 status = "disabled";
1128 }; 1122 };
1129 1123
1130 i2c3: i2c@4c004000 { 1124 i2c3: i2c@4c004000 {
1131 compatible = 1125 compatible = "st,stm32mp13-i2c";
1132 reg = <0x4c00 1126 reg = <0x4c004000 0x400>;
1133 interrupt-nam 1127 interrupt-names = "event", "error";
1134 interrupts = 1128 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1135 1129 <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1136 clocks = <&rc 1130 clocks = <&rcc I2C3_K>;
1137 resets = <&rc 1131 resets = <&rcc I2C3_R>;
1138 #address-cell 1132 #address-cells = <1>;
1139 #size-cells = 1133 #size-cells = <0>;
1140 dmas = <&dmam 1134 dmas = <&dmamux1 73 0x400 0x1>,
1141 <&dmam 1135 <&dmamux1 74 0x400 0x1>;
1142 dma-names = " 1136 dma-names = "rx", "tx";
1143 st,syscfg-fmp 1137 st,syscfg-fmp = <&syscfg 0x4 0x4>;
1144 i2c-analog-fi 1138 i2c-analog-filter;
1145 access-contro 1139 access-controllers = <&etzpc 20>;
1146 status = "dis 1140 status = "disabled";
1147 }; 1141 };
1148 1142
1149 i2c4: i2c@4c005000 { 1143 i2c4: i2c@4c005000 {
1150 compatible = 1144 compatible = "st,stm32mp13-i2c";
1151 reg = <0x4c00 1145 reg = <0x4c005000 0x400>;
1152 interrupt-nam 1146 interrupt-names = "event", "error";
1153 interrupts = 1147 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
1154 1148 <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
1155 clocks = <&rc 1149 clocks = <&rcc I2C4_K>;
1156 resets = <&rc 1150 resets = <&rcc I2C4_R>;
1157 #address-cell 1151 #address-cells = <1>;
1158 #size-cells = 1152 #size-cells = <0>;
1159 dmas = <&dmam 1153 dmas = <&dmamux1 75 0x400 0x1>,
1160 <&dmam 1154 <&dmamux1 76 0x400 0x1>;
1161 dma-names = " 1155 dma-names = "rx", "tx";
1162 st,syscfg-fmp 1156 st,syscfg-fmp = <&syscfg 0x4 0x8>;
1163 i2c-analog-fi 1157 i2c-analog-filter;
1164 access-contro 1158 access-controllers = <&etzpc 21>;
1165 status = "dis 1159 status = "disabled";
1166 }; 1160 };
1167 1161
1168 i2c5: i2c@4c006000 { 1162 i2c5: i2c@4c006000 {
1169 compatible = 1163 compatible = "st,stm32mp13-i2c";
1170 reg = <0x4c00 1164 reg = <0x4c006000 0x400>;
1171 interrupt-nam 1165 interrupt-names = "event", "error";
1172 interrupts = 1166 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1173 1167 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
1174 clocks = <&rc 1168 clocks = <&rcc I2C5_K>;
1175 resets = <&rc 1169 resets = <&rcc I2C5_R>;
1176 #address-cell 1170 #address-cells = <1>;
1177 #size-cells = 1171 #size-cells = <0>;
1178 dmas = <&dmam 1172 dmas = <&dmamux1 115 0x400 0x1>,
1179 <&dmam 1173 <&dmamux1 116 0x400 0x1>;
1180 dma-names = " 1174 dma-names = "rx", "tx";
1181 st,syscfg-fmp 1175 st,syscfg-fmp = <&syscfg 0x4 0x10>;
1182 i2c-analog-fi 1176 i2c-analog-filter;
1183 access-contro 1177 access-controllers = <&etzpc 22>;
1184 status = "dis 1178 status = "disabled";
1185 }; 1179 };
1186 1180
1187 timers12: timer@4c007 1181 timers12: timer@4c007000 {
1188 #address-cell 1182 #address-cells = <1>;
1189 #size-cells = 1183 #size-cells = <0>;
1190 compatible = 1184 compatible = "st,stm32-timers";
1191 reg = <0x4c00 1185 reg = <0x4c007000 0x400>;
1192 interrupts = 1186 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1193 interrupt-nam 1187 interrupt-names = "global";
1194 clocks = <&rc 1188 clocks = <&rcc TIM12_K>;
1195 clock-names = 1189 clock-names = "int";
1196 access-contro 1190 access-controllers = <&etzpc 23>;
1197 status = "dis 1191 status = "disabled";
1198 1192
1199 pwm { 1193 pwm {
1200 compa 1194 compatible = "st,stm32-pwm";
1201 #pwm- 1195 #pwm-cells = <3>;
1202 statu 1196 status = "disabled";
1203 }; 1197 };
1204 1198
1205 timer@11 { 1199 timer@11 {
1206 compa 1200 compatible = "st,stm32h7-timer-trigger";
1207 reg = 1201 reg = <11>;
1208 statu 1202 status = "disabled";
1209 }; 1203 };
1210 }; 1204 };
1211 1205
1212 timers13: timer@4c008 1206 timers13: timer@4c008000 {
1213 #address-cell 1207 #address-cells = <1>;
1214 #size-cells = 1208 #size-cells = <0>;
1215 compatible = 1209 compatible = "st,stm32-timers";
1216 reg = <0x4c00 1210 reg = <0x4c008000 0x400>;
1217 interrupts = 1211 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
1218 interrupt-nam 1212 interrupt-names = "global";
1219 clocks = <&rc 1213 clocks = <&rcc TIM13_K>;
1220 clock-names = 1214 clock-names = "int";
1221 access-contro 1215 access-controllers = <&etzpc 24>;
1222 status = "dis 1216 status = "disabled";
1223 1217
1224 pwm { 1218 pwm {
1225 compa 1219 compatible = "st,stm32-pwm";
1226 #pwm- 1220 #pwm-cells = <3>;
1227 statu 1221 status = "disabled";
1228 }; 1222 };
1229 1223
1230 timer@12 { 1224 timer@12 {
1231 compa 1225 compatible = "st,stm32h7-timer-trigger";
1232 reg = 1226 reg = <12>;
1233 statu 1227 status = "disabled";
1234 }; 1228 };
1235 }; 1229 };
1236 1230
1237 timers14: timer@4c009 1231 timers14: timer@4c009000 {
1238 #address-cell 1232 #address-cells = <1>;
1239 #size-cells = 1233 #size-cells = <0>;
1240 compatible = 1234 compatible = "st,stm32-timers";
1241 reg = <0x4c00 1235 reg = <0x4c009000 0x400>;
1242 interrupts = 1236 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
1243 interrupt-nam 1237 interrupt-names = "global";
1244 clocks = <&rc 1238 clocks = <&rcc TIM14_K>;
1245 clock-names = 1239 clock-names = "int";
1246 access-contro 1240 access-controllers = <&etzpc 25>;
1247 status = "dis 1241 status = "disabled";
1248 1242
1249 pwm { 1243 pwm {
1250 compa 1244 compatible = "st,stm32-pwm";
1251 #pwm- 1245 #pwm-cells = <3>;
1252 statu 1246 status = "disabled";
1253 }; 1247 };
1254 1248
1255 timer@13 { 1249 timer@13 {
1256 compa 1250 compatible = "st,stm32h7-timer-trigger";
1257 reg = 1251 reg = <13>;
1258 statu 1252 status = "disabled";
1259 }; 1253 };
1260 }; 1254 };
1261 1255
1262 timers15: timer@4c00a 1256 timers15: timer@4c00a000 {
1263 #address-cell 1257 #address-cells = <1>;
1264 #size-cells = 1258 #size-cells = <0>;
1265 compatible = 1259 compatible = "st,stm32-timers";
1266 reg = <0x4c00 1260 reg = <0x4c00a000 0x400>;
1267 interrupts = 1261 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1268 interrupt-nam 1262 interrupt-names = "global";
1269 clocks = <&rc 1263 clocks = <&rcc TIM15_K>;
1270 clock-names = 1264 clock-names = "int";
1271 dmas = <&dmam 1265 dmas = <&dmamux1 105 0x400 0x1>,
1272 <&dmamux1 106 1266 <&dmamux1 106 0x400 0x1>,
1273 <&dmamux1 107 1267 <&dmamux1 107 0x400 0x1>,
1274 <&dmamux1 108 1268 <&dmamux1 108 0x400 0x1>;
1275 dma-names = " 1269 dma-names = "ch1", "up", "trig", "com";
1276 access-contro 1270 access-controllers = <&etzpc 26>;
1277 status = "dis 1271 status = "disabled";
1278 1272
1279 pwm { 1273 pwm {
1280 compa 1274 compatible = "st,stm32-pwm";
1281 #pwm- 1275 #pwm-cells = <3>;
1282 statu 1276 status = "disabled";
1283 }; 1277 };
1284 1278
1285 timer@14 { 1279 timer@14 {
1286 compa 1280 compatible = "st,stm32h7-timer-trigger";
1287 reg = 1281 reg = <14>;
1288 statu 1282 status = "disabled";
1289 }; 1283 };
1290 }; 1284 };
1291 1285
1292 timers16: timer@4c00b 1286 timers16: timer@4c00b000 {
1293 #address-cell 1287 #address-cells = <1>;
1294 #size-cells = 1288 #size-cells = <0>;
1295 compatible = 1289 compatible = "st,stm32-timers";
1296 reg = <0x4c00 1290 reg = <0x4c00b000 0x400>;
1297 interrupts = 1291 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1298 interrupt-nam 1292 interrupt-names = "global";
1299 clocks = <&rc 1293 clocks = <&rcc TIM16_K>;
1300 clock-names = 1294 clock-names = "int";
1301 dmas = <&dmam 1295 dmas = <&dmamux1 109 0x400 0x1>,
1302 <&dmamux1 110 1296 <&dmamux1 110 0x400 0x1>;
1303 dma-names = " 1297 dma-names = "ch1", "up";
1304 access-contro 1298 access-controllers = <&etzpc 27>;
1305 status = "dis 1299 status = "disabled";
1306 1300
1307 pwm { 1301 pwm {
1308 compa 1302 compatible = "st,stm32-pwm";
1309 #pwm- 1303 #pwm-cells = <3>;
1310 statu 1304 status = "disabled";
1311 }; 1305 };
1312 1306
1313 timer@15 { 1307 timer@15 {
1314 compa 1308 compatible = "st,stm32h7-timer-trigger";
1315 reg = 1309 reg = <15>;
1316 statu 1310 status = "disabled";
1317 }; 1311 };
1318 }; 1312 };
1319 1313
1320 timers17: timer@4c00c 1314 timers17: timer@4c00c000 {
1321 #address-cell 1315 #address-cells = <1>;
1322 #size-cells = 1316 #size-cells = <0>;
1323 compatible = 1317 compatible = "st,stm32-timers";
1324 reg = <0x4c00 1318 reg = <0x4c00c000 0x400>;
1325 interrupts = 1319 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1326 interrupt-nam 1320 interrupt-names = "global";
1327 clocks = <&rc 1321 clocks = <&rcc TIM17_K>;
1328 clock-names = 1322 clock-names = "int";
1329 dmas = <&dmam 1323 dmas = <&dmamux1 111 0x400 0x1>,
1330 <&dmam 1324 <&dmamux1 112 0x400 0x1>;
1331 dma-names = " 1325 dma-names = "ch1", "up";
1332 access-contro 1326 access-controllers = <&etzpc 28>;
1333 status = "dis 1327 status = "disabled";
1334 1328
1335 pwm { 1329 pwm {
1336 compa 1330 compatible = "st,stm32-pwm";
1337 #pwm- 1331 #pwm-cells = <3>;
1338 statu 1332 status = "disabled";
1339 }; 1333 };
1340 1334
1341 timer@16 { 1335 timer@16 {
1342 compa 1336 compatible = "st,stm32h7-timer-trigger";
1343 reg = 1337 reg = <16>;
1344 statu 1338 status = "disabled";
1345 }; 1339 };
1346 }; 1340 };
1347 1341
1348 lptimer2: timer@50021 1342 lptimer2: timer@50021000 {
1349 #address-cell 1343 #address-cells = <1>;
1350 #size-cells = 1344 #size-cells = <0>;
1351 compatible = 1345 compatible = "st,stm32-lptimer";
1352 reg = <0x5002 1346 reg = <0x50021000 0x400>;
1353 interrupts-ex 1347 interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
1354 clocks = <&rc 1348 clocks = <&rcc LPTIM2_K>;
1355 clock-names = 1349 clock-names = "mux";
1356 wakeup-source 1350 wakeup-source;
1357 access-contro 1351 access-controllers = <&etzpc 1>;
1358 status = "dis 1352 status = "disabled";
1359 1353
1360 pwm { 1354 pwm {
1361 compa 1355 compatible = "st,stm32-pwm-lp";
1362 #pwm- 1356 #pwm-cells = <3>;
1363 statu 1357 status = "disabled";
1364 }; 1358 };
1365 1359
1366 trigger@1 { 1360 trigger@1 {
1367 compa 1361 compatible = "st,stm32-lptimer-trigger";
1368 reg = 1362 reg = <1>;
1369 statu 1363 status = "disabled";
1370 }; 1364 };
1371 1365
1372 counter { 1366 counter {
1373 compa 1367 compatible = "st,stm32-lptimer-counter";
1374 statu 1368 status = "disabled";
1375 }; 1369 };
1376 1370
1377 timer { 1371 timer {
1378 compa 1372 compatible = "st,stm32-lptimer-timer";
1379 statu 1373 status = "disabled";
1380 }; 1374 };
1381 }; 1375 };
1382 1376
1383 lptimer3: timer@50022 1377 lptimer3: timer@50022000 {
1384 #address-cell 1378 #address-cells = <1>;
1385 #size-cells = 1379 #size-cells = <0>;
1386 compatible = 1380 compatible = "st,stm32-lptimer";
1387 reg = <0x5002 1381 reg = <0x50022000 0x400>;
1388 interrupts-ex 1382 interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
1389 clocks = <&rc 1383 clocks = <&rcc LPTIM3_K>;
1390 clock-names = 1384 clock-names = "mux";
1391 wakeup-source 1385 wakeup-source;
1392 access-contro 1386 access-controllers = <&etzpc 2>;
1393 status = "dis 1387 status = "disabled";
1394 1388
1395 pwm { 1389 pwm {
1396 compa 1390 compatible = "st,stm32-pwm-lp";
1397 #pwm- 1391 #pwm-cells = <3>;
1398 statu 1392 status = "disabled";
1399 }; 1393 };
1400 1394
1401 trigger@2 { 1395 trigger@2 {
1402 compa 1396 compatible = "st,stm32-lptimer-trigger";
1403 reg = 1397 reg = <2>;
1404 statu 1398 status = "disabled";
1405 }; 1399 };
1406 1400
1407 timer { 1401 timer {
1408 compa 1402 compatible = "st,stm32-lptimer-timer";
1409 statu 1403 status = "disabled";
1410 }; 1404 };
1411 }; 1405 };
1412 1406
1413 hash: hash@54003000 { 1407 hash: hash@54003000 {
1414 compatible = 1408 compatible = "st,stm32mp13-hash";
1415 reg = <0x5400 1409 reg = <0x54003000 0x400>;
1416 interrupts = 1410 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1417 clocks = <&rc 1411 clocks = <&rcc HASH1>;
1418 resets = <&rc 1412 resets = <&rcc HASH1_R>;
1419 dmas = <&mdma 1413 dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
1420 dma-names = " 1414 dma-names = "in";
1421 access-contro 1415 access-controllers = <&etzpc 41>;
1422 status = "dis 1416 status = "disabled";
1423 }; 1417 };
1424 1418
1425 rng: rng@54004000 { 1419 rng: rng@54004000 {
1426 compatible = 1420 compatible = "st,stm32mp13-rng";
1427 reg = <0x5400 1421 reg = <0x54004000 0x400>;
1428 clocks = <&rc 1422 clocks = <&rcc RNG1_K>;
1429 resets = <&rc 1423 resets = <&rcc RNG1_R>;
1430 access-contro 1424 access-controllers = <&etzpc 40>;
1431 status = "dis 1425 status = "disabled";
1432 }; 1426 };
1433 1427
1434 fmc: memory-controlle 1428 fmc: memory-controller@58002000 {
1435 compatible = 1429 compatible = "st,stm32mp1-fmc2-ebi";
1436 reg = <0x5800 1430 reg = <0x58002000 0x1000>;
1437 ranges = <0 0 1431 ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
1438 <1 0 1432 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
1439 <2 0 1433 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
1440 <3 0 1434 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
1441 <4 0 1435 <4 0 0x80000000 0x10000000>; /* NAND */
1442 #address-cell 1436 #address-cells = <2>;
1443 #size-cells = 1437 #size-cells = <1>;
1444 clocks = <&rc 1438 clocks = <&rcc FMC_K>;
1445 resets = <&rc 1439 resets = <&rcc FMC_R>;
1446 access-contro 1440 access-controllers = <&etzpc 54>;
1447 status = "dis 1441 status = "disabled";
1448 1442
1449 nand-controll 1443 nand-controller@4,0 {
1450 compa 1444 compatible = "st,stm32mp1-fmc2-nfc";
1451 reg = 1445 reg = <4 0x00000000 0x1000>,
1452 1446 <4 0x08010000 0x1000>,
1453 1447 <4 0x08020000 0x1000>,
1454 1448 <4 0x01000000 0x1000>,
1455 1449 <4 0x09010000 0x1000>,
1456 1450 <4 0x09020000 0x1000>;
1457 #addr 1451 #address-cells = <1>;
1458 #size 1452 #size-cells = <0>;
1459 inter 1453 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1460 dmas 1454 dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
1461 1455 <&mdma 24 0x2 0x12000a08 0x0 0x0>,
1462 1456 <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
1463 dma-n 1457 dma-names = "tx", "rx", "ecc";
1464 statu 1458 status = "disabled";
1465 }; 1459 };
1466 }; 1460 };
1467 1461
1468 qspi: spi@58003000 { 1462 qspi: spi@58003000 {
1469 compatible = 1463 compatible = "st,stm32f469-qspi";
1470 reg = <0x5800 1464 reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
1471 reg-names = " 1465 reg-names = "qspi", "qspi_mm";
1472 #address-cell 1466 #address-cells = <1>;
1473 #size-cells = 1467 #size-cells = <0>;
1474 interrupts = 1468 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1475 dmas = <&mdma 1469 dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
1476 <&mdma 1470 <&mdma 26 0x2 0x10100008 0x0 0x0>;
1477 dma-names = " 1471 dma-names = "tx", "rx";
1478 clocks = <&rc 1472 clocks = <&rcc QSPI_K>;
1479 resets = <&rc 1473 resets = <&rcc QSPI_R>;
1480 access-contro 1474 access-controllers = <&etzpc 55>;
1481 status = "dis 1475 status = "disabled";
1482 }; 1476 };
1483 1477
1484 sdmmc1: mmc@58005000 1478 sdmmc1: mmc@58005000 {
1485 compatible = 1479 compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1486 arm,primecell 1480 arm,primecell-periphid = <0x20253180>;
1487 reg = <0x5800 1481 reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
1488 interrupts = 1482 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
1489 clocks = <&rc 1483 clocks = <&rcc SDMMC1_K>;
1490 clock-names = 1484 clock-names = "apb_pclk";
1491 resets = <&rc 1485 resets = <&rcc SDMMC1_R>;
1492 cap-sd-highsp 1486 cap-sd-highspeed;
1493 cap-mmc-highs 1487 cap-mmc-highspeed;
1494 max-frequency 1488 max-frequency = <130000000>;
1495 access-contro 1489 access-controllers = <&etzpc 50>;
1496 status = "dis 1490 status = "disabled";
1497 }; 1491 };
1498 1492
1499 sdmmc2: mmc@58007000 1493 sdmmc2: mmc@58007000 {
1500 compatible = 1494 compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1501 arm,primecell 1495 arm,primecell-periphid = <0x20253180>;
1502 reg = <0x5800 1496 reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
1503 interrupts = 1497 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1504 clocks = <&rc 1498 clocks = <&rcc SDMMC2_K>;
1505 clock-names = 1499 clock-names = "apb_pclk";
1506 resets = <&rc 1500 resets = <&rcc SDMMC2_R>;
1507 cap-sd-highsp 1501 cap-sd-highspeed;
1508 cap-mmc-highs 1502 cap-mmc-highspeed;
1509 max-frequency 1503 max-frequency = <130000000>;
1510 access-contro 1504 access-controllers = <&etzpc 51>;
1511 status = "dis 1505 status = "disabled";
1512 }; <<
1513 <<
1514 ethernet1: ethernet@5 <<
1515 compatible = <<
1516 reg = <0x5800 <<
1517 reg-names = " <<
1518 interrupts-ex <<
1519 <<
1520 interrupt-nam <<
1521 clock-names = <<
1522 <<
1523 <<
1524 <<
1525 <<
1526 clocks = <&rc <<
1527 <&rc <<
1528 <&rc <<
1529 <&rc <<
1530 <&rc <<
1531 st,syscon = < <<
1532 snps,mixed-bu <<
1533 snps,pbl = <2 <<
1534 snps,axi-conf <<
1535 snps,tso; <<
1536 access-contro <<
1537 status = "dis <<
1538 <<
1539 stmmac_axi_co <<
1540 snps, <<
1541 snps, <<
1542 snps, <<
1543 }; <<
1544 }; 1506 };
1545 1507
1546 usbphyc: usbphyc@5a00 1508 usbphyc: usbphyc@5a006000 {
1547 #address-cell 1509 #address-cells = <1>;
1548 #size-cells = 1510 #size-cells = <0>;
1549 #clock-cells 1511 #clock-cells = <0>;
1550 compatible = 1512 compatible = "st,stm32mp1-usbphyc";
1551 reg = <0x5a00 1513 reg = <0x5a006000 0x1000>;
1552 clocks = <&rc 1514 clocks = <&rcc USBPHY_K>;
1553 resets = <&rc 1515 resets = <&rcc USBPHY_R>;
1554 vdda1v1-suppl 1516 vdda1v1-supply = <&scmi_reg11>;
1555 vdda1v8-suppl 1517 vdda1v8-supply = <&scmi_reg18>;
1556 access-contro 1518 access-controllers = <&etzpc 5>;
1557 status = "dis 1519 status = "disabled";
1558 1520
1559 usbphyc_port0 1521 usbphyc_port0: usb-phy@0 {
1560 #phy- 1522 #phy-cells = <0>;
1561 reg = 1523 reg = <0>;
1562 }; 1524 };
1563 1525
1564 usbphyc_port1 1526 usbphyc_port1: usb-phy@1 {
1565 #phy- 1527 #phy-cells = <1>;
1566 reg = 1528 reg = <1>;
1567 }; 1529 };
1568 }; 1530 };
1569 }; 1531 };
1570 1532
1571 /* 1533 /*
1572 * Break node order to solve 1534 * Break node order to solve dependency probe issue between
1573 * pinctrl and exti. 1535 * pinctrl and exti.
1574 */ 1536 */
1575 pinctrl: pinctrl@50002000 { 1537 pinctrl: pinctrl@50002000 {
1576 #address-cells = <1>; 1538 #address-cells = <1>;
1577 #size-cells = <1>; 1539 #size-cells = <1>;
1578 compatible = "st,stm3 1540 compatible = "st,stm32mp135-pinctrl";
1579 ranges = <0 0x5000200 1541 ranges = <0 0x50002000 0x8400>;
1580 interrupt-parent = <& 1542 interrupt-parent = <&exti>;
1581 st,syscfg = <&exti 0x 1543 st,syscfg = <&exti 0x60 0xff>;
1582 1544
1583 gpioa: gpio@50002000 1545 gpioa: gpio@50002000 {
1584 gpio-controll 1546 gpio-controller;
1585 #gpio-cells = 1547 #gpio-cells = <2>;
1586 interrupt-con 1548 interrupt-controller;
1587 #interrupt-ce 1549 #interrupt-cells = <2>;
1588 reg = <0x0 0x 1550 reg = <0x0 0x400>;
1589 clocks = <&rc 1551 clocks = <&rcc GPIOA>;
1590 st,bank-name 1552 st,bank-name = "GPIOA";
1591 ngpios = <16> 1553 ngpios = <16>;
1592 gpio-ranges = 1554 gpio-ranges = <&pinctrl 0 0 16>;
1593 }; 1555 };
1594 1556
1595 gpiob: gpio@50003000 1557 gpiob: gpio@50003000 {
1596 gpio-controll 1558 gpio-controller;
1597 #gpio-cells = 1559 #gpio-cells = <2>;
1598 interrupt-con 1560 interrupt-controller;
1599 #interrupt-ce 1561 #interrupt-cells = <2>;
1600 reg = <0x1000 1562 reg = <0x1000 0x400>;
1601 clocks = <&rc 1563 clocks = <&rcc GPIOB>;
1602 st,bank-name 1564 st,bank-name = "GPIOB";
1603 ngpios = <16> 1565 ngpios = <16>;
1604 gpio-ranges = 1566 gpio-ranges = <&pinctrl 0 16 16>;
1605 }; 1567 };
1606 1568
1607 gpioc: gpio@50004000 1569 gpioc: gpio@50004000 {
1608 gpio-controll 1570 gpio-controller;
1609 #gpio-cells = 1571 #gpio-cells = <2>;
1610 interrupt-con 1572 interrupt-controller;
1611 #interrupt-ce 1573 #interrupt-cells = <2>;
1612 reg = <0x2000 1574 reg = <0x2000 0x400>;
1613 clocks = <&rc 1575 clocks = <&rcc GPIOC>;
1614 st,bank-name 1576 st,bank-name = "GPIOC";
1615 ngpios = <16> 1577 ngpios = <16>;
1616 gpio-ranges = 1578 gpio-ranges = <&pinctrl 0 32 16>;
1617 }; 1579 };
1618 1580
1619 gpiod: gpio@50005000 1581 gpiod: gpio@50005000 {
1620 gpio-controll 1582 gpio-controller;
1621 #gpio-cells = 1583 #gpio-cells = <2>;
1622 interrupt-con 1584 interrupt-controller;
1623 #interrupt-ce 1585 #interrupt-cells = <2>;
1624 reg = <0x3000 1586 reg = <0x3000 0x400>;
1625 clocks = <&rc 1587 clocks = <&rcc GPIOD>;
1626 st,bank-name 1588 st,bank-name = "GPIOD";
1627 ngpios = <16> 1589 ngpios = <16>;
1628 gpio-ranges = 1590 gpio-ranges = <&pinctrl 0 48 16>;
1629 }; 1591 };
1630 1592
1631 gpioe: gpio@50006000 1593 gpioe: gpio@50006000 {
1632 gpio-controll 1594 gpio-controller;
1633 #gpio-cells = 1595 #gpio-cells = <2>;
1634 interrupt-con 1596 interrupt-controller;
1635 #interrupt-ce 1597 #interrupt-cells = <2>;
1636 reg = <0x4000 1598 reg = <0x4000 0x400>;
1637 clocks = <&rc 1599 clocks = <&rcc GPIOE>;
1638 st,bank-name 1600 st,bank-name = "GPIOE";
1639 ngpios = <16> 1601 ngpios = <16>;
1640 gpio-ranges = 1602 gpio-ranges = <&pinctrl 0 64 16>;
1641 }; 1603 };
1642 1604
1643 gpiof: gpio@50007000 1605 gpiof: gpio@50007000 {
1644 gpio-controll 1606 gpio-controller;
1645 #gpio-cells = 1607 #gpio-cells = <2>;
1646 interrupt-con 1608 interrupt-controller;
1647 #interrupt-ce 1609 #interrupt-cells = <2>;
1648 reg = <0x5000 1610 reg = <0x5000 0x400>;
1649 clocks = <&rc 1611 clocks = <&rcc GPIOF>;
1650 st,bank-name 1612 st,bank-name = "GPIOF";
1651 ngpios = <16> 1613 ngpios = <16>;
1652 gpio-ranges = 1614 gpio-ranges = <&pinctrl 0 80 16>;
1653 }; 1615 };
1654 1616
1655 gpiog: gpio@50008000 1617 gpiog: gpio@50008000 {
1656 gpio-controll 1618 gpio-controller;
1657 #gpio-cells = 1619 #gpio-cells = <2>;
1658 interrupt-con 1620 interrupt-controller;
1659 #interrupt-ce 1621 #interrupt-cells = <2>;
1660 reg = <0x6000 1622 reg = <0x6000 0x400>;
1661 clocks = <&rc 1623 clocks = <&rcc GPIOG>;
1662 st,bank-name 1624 st,bank-name = "GPIOG";
1663 ngpios = <16> 1625 ngpios = <16>;
1664 gpio-ranges = 1626 gpio-ranges = <&pinctrl 0 96 16>;
1665 }; 1627 };
1666 1628
1667 gpioh: gpio@50009000 1629 gpioh: gpio@50009000 {
1668 gpio-controll 1630 gpio-controller;
1669 #gpio-cells = 1631 #gpio-cells = <2>;
1670 interrupt-con 1632 interrupt-controller;
1671 #interrupt-ce 1633 #interrupt-cells = <2>;
1672 reg = <0x7000 1634 reg = <0x7000 0x400>;
1673 clocks = <&rc 1635 clocks = <&rcc GPIOH>;
1674 st,bank-name 1636 st,bank-name = "GPIOH";
1675 ngpios = <15> 1637 ngpios = <15>;
1676 gpio-ranges = 1638 gpio-ranges = <&pinctrl 0 112 15>;
1677 }; 1639 };
1678 1640
1679 gpioi: gpio@5000a000 1641 gpioi: gpio@5000a000 {
1680 gpio-controll 1642 gpio-controller;
1681 #gpio-cells = 1643 #gpio-cells = <2>;
1682 interrupt-con 1644 interrupt-controller;
1683 #interrupt-ce 1645 #interrupt-cells = <2>;
1684 reg = <0x8000 1646 reg = <0x8000 0x400>;
1685 clocks = <&rc 1647 clocks = <&rcc GPIOI>;
1686 st,bank-name 1648 st,bank-name = "GPIOI";
1687 ngpios = <8>; 1649 ngpios = <8>;
1688 gpio-ranges = 1650 gpio-ranges = <&pinctrl 0 128 8>;
1689 }; 1651 };
1690 }; 1652 };
1691 }; 1653 };
1692 }; 1654 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.