1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 /* 2 /*
3 * Device Tree for DA850 EVM board 3 * Device Tree for DA850 EVM board
4 * 4 *
5 * Copyright (C) 2012 Texas Instruments Incorp 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
6 */ 6 */
7 /dts-v1/; 7 /dts-v1/;
8 #include "da850.dtsi" 8 #include "da850.dtsi"
9 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
10 10
11 / { 11 / {
12 compatible = "ti,da850-evm", "ti,da850 12 compatible = "ti,da850-evm", "ti,da850";
13 model = "DA850/AM1808/OMAP-L138 EVM"; 13 model = "DA850/AM1808/OMAP-L138 EVM";
14 14
15 chosen { 15 chosen {
16 stdout-path = &serial2; 16 stdout-path = &serial2;
17 }; 17 };
18 18
19 aliases { 19 aliases {
20 serial0 = &serial0; 20 serial0 = &serial0;
21 serial1 = &serial1; 21 serial1 = &serial1;
22 serial2 = &serial2; 22 serial2 = &serial2;
23 ethernet0 = ð0; 23 ethernet0 = ð0;
24 spi0 = &spi1; 24 spi0 = &spi1;
25 }; 25 };
26 26
27 backlight: backlight-pwm { 27 backlight: backlight-pwm {
28 pinctrl-names = "default"; 28 pinctrl-names = "default";
29 pinctrl-0 = <&ecap2_pins>; 29 pinctrl-0 = <&ecap2_pins>;
30 power-supply = <&backlight_lcd 30 power-supply = <&backlight_lcd>;
31 compatible = "pwm-backlight"; 31 compatible = "pwm-backlight";
32 /* 32 /*
33 * The PWM here corresponds to 33 * The PWM here corresponds to production hardware. The
34 * schematic needs to be 10151 34 * schematic needs to be 1015171 (15 March 2010), Rev A
35 * or newer. 35 * or newer.
36 */ 36 */
37 pwms = <&ecap2 0 50000 0>; 37 pwms = <&ecap2 0 50000 0>;
38 brightness-levels = <0 10 20 3 38 brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
39 default-brightness-level = <7> 39 default-brightness-level = <7>;
40 }; 40 };
41 41
42 panel { 42 panel {
43 compatible = "ti,tilcdc,panel" 43 compatible = "ti,tilcdc,panel";
44 pinctrl-names = "default"; 44 pinctrl-names = "default";
45 pinctrl-0 = <&lcd_pins>; 45 pinctrl-0 = <&lcd_pins>;
46 /* 46 /*
47 * The vpif and the LCD are mu 47 * The vpif and the LCD are mutually exclusive.
48 * To enable VPIF, change the 48 * To enable VPIF, change the status below to 'disabled' then
49 * then change the status of t 49 * then change the status of the vpif below to 'okay'
50 */ 50 */
51 status = "okay"; 51 status = "okay";
52 enable-gpios = <&gpio 40 GPIO_ 52 enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
53 53
54 panel-info { 54 panel-info {
55 ac-bias = <255>; 55 ac-bias = <255>;
56 ac-bias-intrpt = <0>; 56 ac-bias-intrpt = <0>;
57 dma-burst-sz = <16>; 57 dma-burst-sz = <16>;
58 bpp = <16>; 58 bpp = <16>;
59 fdd = <0x80>; 59 fdd = <0x80>;
60 sync-edge = <0>; 60 sync-edge = <0>;
61 sync-ctrl = <1>; 61 sync-ctrl = <1>;
62 raster-order = <0>; 62 raster-order = <0>;
63 fifo-th = <0>; 63 fifo-th = <0>;
64 }; 64 };
65 65
66 display-timings { 66 display-timings {
67 native-mode = <&timing 67 native-mode = <&timing0>;
68 timing0: timing-480x27 68 timing0: timing-480x272 {
69 clock-frequenc 69 clock-frequency = <9000000>;
70 hactive = <480 70 hactive = <480>;
71 vactive = <272 71 vactive = <272>;
72 hfront-porch = 72 hfront-porch = <3>;
73 hback-porch = 73 hback-porch = <2>;
74 hsync-len = <4 74 hsync-len = <42>;
75 vback-porch = 75 vback-porch = <3>;
76 vfront-porch = 76 vfront-porch = <4>;
77 vsync-len = <1 77 vsync-len = <11>;
78 hsync-active = 78 hsync-active = <0>;
79 vsync-active = 79 vsync-active = <0>;
80 de-active = <1 80 de-active = <1>;
81 pixelclk-activ 81 pixelclk-active = <1>;
82 }; 82 };
83 }; 83 };
84 }; 84 };
85 85
86 vbat: fixedregulator0 { 86 vbat: fixedregulator0 {
87 compatible = "regulator-fixed" 87 compatible = "regulator-fixed";
88 regulator-name = "vbat"; 88 regulator-name = "vbat";
89 regulator-min-microvolt = <500 89 regulator-min-microvolt = <5000000>;
90 regulator-max-microvolt = <500 90 regulator-max-microvolt = <5000000>;
91 regulator-boot-on; 91 regulator-boot-on;
92 }; 92 };
93 93
94 baseboard_3v3: fixedregulator-3v3 { 94 baseboard_3v3: fixedregulator-3v3 {
95 /* TPS73701DCQ */ 95 /* TPS73701DCQ */
96 compatible = "regulator-fixed" 96 compatible = "regulator-fixed";
97 regulator-name = "baseboard_3v 97 regulator-name = "baseboard_3v3";
98 regulator-min-microvolt = <330 98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <330 99 regulator-max-microvolt = <3300000>;
100 vin-supply = <&vbat>; 100 vin-supply = <&vbat>;
101 regulator-always-on; 101 regulator-always-on;
102 regulator-boot-on; 102 regulator-boot-on;
103 }; 103 };
104 104
105 baseboard_1v8: fixedregulator-1v8 { 105 baseboard_1v8: fixedregulator-1v8 {
106 /* TPS73701DCQ */ 106 /* TPS73701DCQ */
107 compatible = "regulator-fixed" 107 compatible = "regulator-fixed";
108 regulator-name = "baseboard_1v 108 regulator-name = "baseboard_1v8";
109 regulator-min-microvolt = <180 109 regulator-min-microvolt = <1800000>;
110 regulator-max-microvolt = <180 110 regulator-max-microvolt = <1800000>;
111 vin-supply = <&vbat>; 111 vin-supply = <&vbat>;
112 regulator-always-on; 112 regulator-always-on;
113 regulator-boot-on; 113 regulator-boot-on;
114 }; 114 };
115 115
116 backlight_lcd: backlight-regulator { 116 backlight_lcd: backlight-regulator {
117 compatible = "regulator-fixed" 117 compatible = "regulator-fixed";
118 regulator-name = "lcd_backligh 118 regulator-name = "lcd_backlight_pwr";
119 regulator-min-microvolt = <330 119 regulator-min-microvolt = <3300000>;
120 regulator-max-microvolt = <330 120 regulator-max-microvolt = <3300000>;
121 gpio = <&gpio 47 GPIO_ACTIVE_H 121 gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
122 enable-active-high; 122 enable-active-high;
123 }; 123 };
124 124
125 sound { 125 sound {
126 compatible = "simple-audio-car 126 compatible = "simple-audio-card";
127 simple-audio-card,name = "DA85 127 simple-audio-card,name = "DA850-OMAPL138 EVM";
128 simple-audio-card,widgets = 128 simple-audio-card,widgets =
129 "Line", "Line In", 129 "Line", "Line In",
130 "Line", "Line Out"; 130 "Line", "Line Out";
131 simple-audio-card,routing = 131 simple-audio-card,routing =
132 "LINE1L", "Line In", 132 "LINE1L", "Line In",
133 "LINE1R", "Line In", 133 "LINE1R", "Line In",
134 "Line Out", "LLOUT", 134 "Line Out", "LLOUT",
135 "Line Out", "RLOUT"; 135 "Line Out", "RLOUT";
136 simple-audio-card,format = "ds 136 simple-audio-card,format = "dsp_b";
137 simple-audio-card,bitclock-mas 137 simple-audio-card,bitclock-master = <&link0_codec>;
138 simple-audio-card,frame-master 138 simple-audio-card,frame-master = <&link0_codec>;
139 simple-audio-card,bitclock-inv 139 simple-audio-card,bitclock-inversion;
140 140
141 simple-audio-card,cpu { 141 simple-audio-card,cpu {
142 sound-dai = <&mcasp0>; 142 sound-dai = <&mcasp0>;
143 system-clock-frequency 143 system-clock-frequency = <24576000>;
144 }; 144 };
145 145
146 link0_codec: simple-audio-card 146 link0_codec: simple-audio-card,codec {
147 sound-dai = <&tlv320ai 147 sound-dai = <&tlv320aic3106>;
148 system-clock-frequency 148 system-clock-frequency = <24576000>;
149 }; 149 };
150 }; 150 };
151 }; 151 };
152 152
153 &ecap2 { 153 &ecap2 {
154 status = "okay"; 154 status = "okay";
155 }; 155 };
156 156
157 &ref_clk { 157 &ref_clk {
158 clock-frequency = <24000000>; 158 clock-frequency = <24000000>;
159 }; 159 };
160 160
161 &pmx_core { 161 &pmx_core {
162 status = "okay"; 162 status = "okay";
163 163
164 mcasp0_pins: mcasp0-pins { 164 mcasp0_pins: mcasp0-pins {
165 pinctrl-single,bits = < 165 pinctrl-single,bits = <
166 /* 166 /*
167 * AHCLKX, ACLKX, AFSX 167 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
168 * AFSR, AMUTE 168 * AFSR, AMUTE
169 */ 169 */
170 0x00 0x11111111 0xffff 170 0x00 0x11111111 0xffffffff
171 /* AXR11, AXR12 */ 171 /* AXR11, AXR12 */
172 0x04 0x00011000 0x000f 172 0x04 0x00011000 0x000ff000
173 >; 173 >;
174 }; 174 };
175 nand_pins: nand-pins { 175 nand_pins: nand-pins {
176 pinctrl-single,bits = < 176 pinctrl-single,bits = <
177 /* EMA_WAIT[0], EMA_OE 177 /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
178 0x1c 0x10110110 0xf0f 178 0x1c 0x10110110 0xf0ff0ff0
179 /* 179 /*
180 * EMA_D[0], EMA_D[1], 180 * EMA_D[0], EMA_D[1], EMA_D[2],
181 * EMA_D[3], EMA_D[4], 181 * EMA_D[3], EMA_D[4], EMA_D[5],
182 * EMA_D[6], EMA_D[7] 182 * EMA_D[6], EMA_D[7]
183 */ 183 */
184 0x24 0x11111111 0xfff 184 0x24 0x11111111 0xffffffff
185 /* EMA_A[1], EMA_A[2] 185 /* EMA_A[1], EMA_A[2] */
186 0x30 0x01100000 0x0ff 186 0x30 0x01100000 0x0ff00000
187 >; 187 >;
188 }; 188 };
189 }; 189 };
190 190
191 &cpu { 191 &cpu {
192 cpu-supply = <&vdcdc3_reg>; 192 cpu-supply = <&vdcdc3_reg>;
193 }; 193 };
194 194
195 /* 195 /*
196 * The standard da850-evm kits and SOM's are 3 196 * The standard da850-evm kits and SOM's are 375MHz so enable this operating
197 * point by default. Higher frequencies must b 197 * point by default. Higher frequencies must be enabled for custom boards with
198 * other variants of the SoC. 198 * other variants of the SoC.
199 */ 199 */
200 &opp_375 { 200 &opp_375 {
201 status = "okay"; 201 status = "okay";
202 }; 202 };
203 203
204 &sata { 204 &sata {
205 status = "okay"; 205 status = "okay";
206 }; 206 };
207 207
208 &serial0 { 208 &serial0 {
209 status = "okay"; 209 status = "okay";
210 }; 210 };
211 211
212 &serial1 { 212 &serial1 {
213 status = "okay"; 213 status = "okay";
214 }; 214 };
215 215
216 &serial2 { 216 &serial2 {
217 status = "okay"; 217 status = "okay";
218 }; 218 };
219 219
220 &rtc0 { 220 &rtc0 {
221 status = "okay"; 221 status = "okay";
222 }; 222 };
223 223
224 &lcdc { 224 &lcdc {
225 status = "okay"; 225 status = "okay";
226 }; 226 };
227 227
228 &i2c0 { 228 &i2c0 {
229 status = "okay"; 229 status = "okay";
230 clock-frequency = <100000>; 230 clock-frequency = <100000>;
231 pinctrl-names = "default"; 231 pinctrl-names = "default";
232 pinctrl-0 = <&i2c0_pins>; 232 pinctrl-0 = <&i2c0_pins>;
233 233
234 tps: tps@48 { 234 tps: tps@48 {
235 reg = <0x48>; 235 reg = <0x48>;
236 }; 236 };
237 tlv320aic3106: tlv320aic3106@18 { 237 tlv320aic3106: tlv320aic3106@18 {
238 #sound-dai-cells = <0>; 238 #sound-dai-cells = <0>;
239 compatible = "ti,tlv320aic3106 239 compatible = "ti,tlv320aic3106";
240 reg = <0x18>; 240 reg = <0x18>;
241 status = "okay"; 241 status = "okay";
242 242
243 /* Regulators */ 243 /* Regulators */
244 IOVDD-supply = <&vdcdc2_reg>; 244 IOVDD-supply = <&vdcdc2_reg>;
245 AVDD-supply = <&baseboard_3v3> 245 AVDD-supply = <&baseboard_3v3>;
246 DRVDD-supply = <&baseboard_3v3 246 DRVDD-supply = <&baseboard_3v3>;
247 DVDD-supply = <&baseboard_1v8> 247 DVDD-supply = <&baseboard_1v8>;
248 }; 248 };
249 tca6416: gpio@20 { 249 tca6416: gpio@20 {
250 compatible = "ti,tca6416"; 250 compatible = "ti,tca6416";
251 reg = <0x20>; 251 reg = <0x20>;
252 gpio-controller; 252 gpio-controller;
253 #gpio-cells = <2>; 253 #gpio-cells = <2>;
254 }; 254 };
255 tca6416_bb: gpio@21 { 255 tca6416_bb: gpio@21 {
256 compatible = "ti,tca6416"; 256 compatible = "ti,tca6416";
257 reg = <0x21>; 257 reg = <0x21>;
258 gpio-controller; 258 gpio-controller;
259 #gpio-cells = <2>; 259 #gpio-cells = <2>;
260 }; 260 };
261 }; 261 };
262 262
263 &wdt { 263 &wdt {
264 status = "okay"; 264 status = "okay";
265 }; 265 };
266 266
267 &mmc0 { 267 &mmc0 {
268 max-frequency = <50000000>; 268 max-frequency = <50000000>;
269 bus-width = <4>; 269 bus-width = <4>;
270 status = "okay"; 270 status = "okay";
271 pinctrl-names = "default"; 271 pinctrl-names = "default";
272 pinctrl-0 = <&mmc0_pins>; 272 pinctrl-0 = <&mmc0_pins>;
273 cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; 273 cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
274 wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH> 274 wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
275 }; 275 };
276 276
277 &spi1 { 277 &spi1 {
278 status = "okay"; 278 status = "okay";
279 pinctrl-names = "default"; 279 pinctrl-names = "default";
280 pinctrl-0 = <&spi1_pins &spi1_cs0_pin> 280 pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
281 flash: flash@0 { 281 flash: flash@0 {
282 #address-cells = <1>; 282 #address-cells = <1>;
283 #size-cells = <1>; 283 #size-cells = <1>;
284 compatible = "jedec,spi-nor"; 284 compatible = "jedec,spi-nor";
285 spi-max-frequency = <30000000> 285 spi-max-frequency = <30000000>;
286 m25p,fast-read; 286 m25p,fast-read;
287 reg = <0>; 287 reg = <0>;
288 partition@0 { 288 partition@0 {
289 label = "U-Boot-SPL"; 289 label = "U-Boot-SPL";
290 reg = <0x00000000 0x00 290 reg = <0x00000000 0x00010000>;
291 read-only; 291 read-only;
292 }; 292 };
293 partition@1 { 293 partition@1 {
294 label = "U-Boot"; 294 label = "U-Boot";
295 reg = <0x00010000 0x00 295 reg = <0x00010000 0x00080000>;
296 read-only; 296 read-only;
297 }; 297 };
298 partition@2 { 298 partition@2 {
299 label = "U-Boot-Env"; 299 label = "U-Boot-Env";
300 reg = <0x00090000 0x00 300 reg = <0x00090000 0x00010000>;
301 read-only; 301 read-only;
302 }; 302 };
303 partition@3 { 303 partition@3 {
304 label = "Kernel"; 304 label = "Kernel";
305 reg = <0x000a0000 0x00 305 reg = <0x000a0000 0x00280000>;
306 }; 306 };
307 partition@4 { 307 partition@4 {
308 label = "Filesystem"; 308 label = "Filesystem";
309 reg = <0x00320000 0x00 309 reg = <0x00320000 0x00400000>;
310 }; 310 };
311 partition@5 { 311 partition@5 {
312 label = "MAC-Address"; 312 label = "MAC-Address";
313 reg = <0x007f0000 0x00 313 reg = <0x007f0000 0x00010000>;
314 read-only; 314 read-only;
315 }; 315 };
316 }; 316 };
317 }; 317 };
318 318
319 &mdio { 319 &mdio {
320 status = "okay"; 320 status = "okay";
321 pinctrl-names = "default"; 321 pinctrl-names = "default";
322 pinctrl-0 = <&mdio_pins>; 322 pinctrl-0 = <&mdio_pins>;
323 bus_freq = <2200000>; 323 bus_freq = <2200000>;
324 }; 324 };
325 325
326 ð0 { 326 ð0 {
327 status = "okay"; 327 status = "okay";
328 pinctrl-names = "default"; 328 pinctrl-names = "default";
329 pinctrl-0 = <&mii_pins>; 329 pinctrl-0 = <&mii_pins>;
330 }; 330 };
331 331
332 &gpio { 332 &gpio {
333 status = "okay"; 333 status = "okay";
334 }; 334 };
335 335
336 /include/ "../../tps6507x.dtsi" 336 /include/ "../../tps6507x.dtsi"
337 337
338 &tps { 338 &tps {
339 vdcdc1_2-supply = <&vbat>; 339 vdcdc1_2-supply = <&vbat>;
340 vdcdc3-supply = <&vbat>; 340 vdcdc3-supply = <&vbat>;
341 vldo1_2-supply = <&vbat>; 341 vldo1_2-supply = <&vbat>;
342 342
343 regulators { 343 regulators {
344 vdcdc1_reg: regulator@0 { 344 vdcdc1_reg: regulator@0 {
345 regulator-name = "VDCD 345 regulator-name = "VDCDC1_3.3V";
346 regulator-min-microvol 346 regulator-min-microvolt = <3150000>;
347 regulator-max-microvol 347 regulator-max-microvolt = <3450000>;
348 regulator-always-on; 348 regulator-always-on;
349 regulator-boot-on; 349 regulator-boot-on;
350 }; 350 };
351 351
352 vdcdc2_reg: regulator@1 { 352 vdcdc2_reg: regulator@1 {
353 regulator-name = "VDCD 353 regulator-name = "VDCDC2_3.3V";
354 regulator-min-microvol 354 regulator-min-microvolt = <1710000>;
355 regulator-max-microvol 355 regulator-max-microvolt = <3450000>;
356 regulator-always-on; 356 regulator-always-on;
357 regulator-boot-on; 357 regulator-boot-on;
358 ti,defdcdc_default = < 358 ti,defdcdc_default = <1>;
359 }; 359 };
360 360
361 vdcdc3_reg: regulator@2 { 361 vdcdc3_reg: regulator@2 {
362 regulator-name = "VDCD 362 regulator-name = "VDCDC3_1.2V";
363 regulator-min-microvol 363 regulator-min-microvolt = <950000>;
364 regulator-max-microvol 364 regulator-max-microvolt = <1350000>;
365 regulator-always-on; 365 regulator-always-on;
366 regulator-boot-on; 366 regulator-boot-on;
367 ti,defdcdc_default = < 367 ti,defdcdc_default = <1>;
368 }; 368 };
369 369
370 ldo1_reg: regulator@3 { 370 ldo1_reg: regulator@3 {
371 regulator-name = "LDO1 371 regulator-name = "LDO1_1.8V";
372 regulator-min-microvol 372 regulator-min-microvolt = <1710000>;
373 regulator-max-microvol 373 regulator-max-microvolt = <1890000>;
374 regulator-always-on; 374 regulator-always-on;
375 regulator-boot-on; 375 regulator-boot-on;
376 }; 376 };
377 377
378 ldo2_reg: regulator@4 { 378 ldo2_reg: regulator@4 {
379 regulator-name = "LDO2 379 regulator-name = "LDO2_1.2V";
380 regulator-min-microvol 380 regulator-min-microvolt = <1140000>;
381 regulator-max-microvol 381 regulator-max-microvolt = <1320000>;
382 regulator-always-on; 382 regulator-always-on;
383 regulator-boot-on; 383 regulator-boot-on;
384 }; 384 };
385 }; 385 };
386 }; 386 };
387 387
388 &mcasp0 { 388 &mcasp0 {
389 #sound-dai-cells = <0>; 389 #sound-dai-cells = <0>;
390 status = "okay"; 390 status = "okay";
391 pinctrl-names = "default"; 391 pinctrl-names = "default";
392 pinctrl-0 = <&mcasp0_pins>; 392 pinctrl-0 = <&mcasp0_pins>;
393 393
394 op-mode = <0>; /* MCASP_IIS_M 394 op-mode = <0>; /* MCASP_IIS_MODE */
395 tdm-slots = <2>; 395 tdm-slots = <2>;
396 /* 4 serializer */ 396 /* 4 serializer */
397 serial-dir = < /* 0: INACTIVE, 1: TX, 397 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
398 0 0 0 0 398 0 0 0 0
399 0 0 0 0 399 0 0 0 0
400 0 0 0 1 400 0 0 0 1
401 2 0 0 0 401 2 0 0 0
402 >; 402 >;
403 tx-num-evt = <32>; 403 tx-num-evt = <32>;
404 rx-num-evt = <32>; 404 rx-num-evt = <32>;
405 }; 405 };
406 406
407 &edma0 { 407 &edma0 {
408 ti,edma-reserved-slot-ranges = <32 50> 408 ti,edma-reserved-slot-ranges = <32 50>;
409 }; 409 };
410 410
411 &edma1 { 411 &edma1 {
412 ti,edma-reserved-slot-ranges = <32 90> 412 ti,edma-reserved-slot-ranges = <32 90>;
413 }; 413 };
414 414
415 &aemif { 415 &aemif {
416 pinctrl-names = "default"; 416 pinctrl-names = "default";
417 pinctrl-0 = <&nand_pins>; 417 pinctrl-0 = <&nand_pins>;
418 status = "okay"; 418 status = "okay";
419 cs3 { 419 cs3 {
420 #address-cells = <2>; 420 #address-cells = <2>;
421 #size-cells = <1>; 421 #size-cells = <1>;
422 clock-ranges; 422 clock-ranges;
423 ranges; 423 ranges;
424 424
425 ti,cs-chipselect = <3>; 425 ti,cs-chipselect = <3>;
426 426
427 nand@2000000,0 { 427 nand@2000000,0 {
428 compatible = "ti,davin 428 compatible = "ti,davinci-nand";
429 #address-cells = <1>; 429 #address-cells = <1>;
430 #size-cells = <1>; 430 #size-cells = <1>;
431 reg = <0 0x02000000 0x 431 reg = <0 0x02000000 0x02000000
432 1 0x00000000 0x 432 1 0x00000000 0x00008000>;
433 433
434 ti,davinci-chipselect 434 ti,davinci-chipselect = <1>;
435 ti,davinci-mask-ale = 435 ti,davinci-mask-ale = <0>;
436 ti,davinci-mask-cle = 436 ti,davinci-mask-cle = <0>;
437 ti,davinci-mask-chipse 437 ti,davinci-mask-chipsel = <0>;
438 ti,davinci-ecc-mode = 438 ti,davinci-ecc-mode = "hw";
439 ti,davinci-ecc-bits = 439 ti,davinci-ecc-bits = <4>;
440 ti,davinci-nand-use-bb 440 ti,davinci-nand-use-bbt;
441 }; 441 };
442 }; 442 };
443 }; 443 };
444 444
445 &usb_phy { 445 &usb_phy {
446 status = "okay"; 446 status = "okay";
447 }; 447 };
448 448
449 &usb0 { 449 &usb0 {
450 status = "okay"; 450 status = "okay";
451 }; 451 };
452 452
453 &usb1 { 453 &usb1 {
454 status = "okay"; 454 status = "okay";
455 }; 455 };
456 456
457 &vpif { 457 &vpif {
458 pinctrl-names = "default"; 458 pinctrl-names = "default";
459 pinctrl-0 = <&vpif_capture_pins>, <&vp 459 pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
460 /* 460 /*
461 * The vpif and the LCD are mutually e 461 * The vpif and the LCD are mutually exclusive.
462 * To enable VPIF, disable the ti,tilc 462 * To enable VPIF, disable the ti,tilcdc,panel then
463 * change the status below to 'okay' 463 * change the status below to 'okay'
464 */ 464 */
465 status = "disabled"; 465 status = "disabled";
466 }; 466 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.