1 // SPDX-License-Identifier: GPL-2.0 1 // SPDX-License-Identifier: GPL-2.0
2 /* 2 /*
3 * Copyright (C) 2012 Texas Instruments Incorp 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 * Copyright (C) 2018 Robert Bosch Power Tools 4 * Copyright (C) 2018 Robert Bosch Power Tools GmbH
5 */ 5 */
6 /dts-v1/; 6 /dts-v1/;
7 7
8 #include "am33xx.dtsi" 8 #include "am33xx.dtsi"
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 10 #include <dt-bindings/interrupt-controller/irq.h>
11 11
12 / { 12 / {
13 model = "Bosch AM335x Guardian"; 13 model = "Bosch AM335x Guardian";
14 compatible = "bosch,am335x-guardian", 14 compatible = "bosch,am335x-guardian", "ti,am33xx";
15 15
16 chosen { 16 chosen {
17 stdout-path = &uart0; 17 stdout-path = &uart0;
18 tick-timer = &timer2; 18 tick-timer = &timer2;
19 }; 19 };
20 20
21 cpus { 21 cpus {
22 cpu@0 { 22 cpu@0 {
23 cpu0-supply = <&dcdc2_ 23 cpu0-supply = <&dcdc2_reg>;
24 }; 24 };
25 }; 25 };
26 26
27 memory@80000000 { 27 memory@80000000 {
28 device_type = "memory"; 28 device_type = "memory";
29 reg = <0x80000000 0x10000000>; 29 reg = <0x80000000 0x10000000>; /* 256 MB */
30 }; 30 };
31 31
32 guardian_buttons: gpio-keys { 32 guardian_buttons: gpio-keys {
33 pinctrl-names = "default"; 33 pinctrl-names = "default";
34 pinctrl-0 = <&guardian_button_ 34 pinctrl-0 = <&guardian_button_pins>;
35 compatible = "gpio-keys"; 35 compatible = "gpio-keys";
36 36
37 select-button { 37 select-button {
38 label = "guardian-sele 38 label = "guardian-select-button";
39 linux,code = <KEY_5>; 39 linux,code = <KEY_5>;
40 gpios = <&gpio1 31 GPI 40 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
41 wakeup-source; 41 wakeup-source;
42 }; 42 };
43 43
44 power-button { 44 power-button {
45 label = "guardian-powe 45 label = "guardian-power-button";
46 linux,code = <KEY_POWE 46 linux,code = <KEY_POWER>;
47 gpios = <&gpio2 21 GPI 47 gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
48 wakeup-source; 48 wakeup-source;
49 }; 49 };
50 }; 50 };
51 51
52 guardian_leds: gpio-leds { 52 guardian_leds: gpio-leds {
53 pinctrl-names = "default"; 53 pinctrl-names = "default";
54 pinctrl-0 = <&guardian_led_pin 54 pinctrl-0 = <&guardian_led_pins>;
55 compatible = "gpio-leds"; 55 compatible = "gpio-leds";
56 56
57 life-led { 57 life-led {
58 label = "guardian:life 58 label = "guardian:life-led";
59 gpios = <&gpio1 26 GPI 59 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
60 linux,default-trigger 60 linux,default-trigger = "heartbeat";
61 default-state = "off"; 61 default-state = "off";
62 }; 62 };
63 }; 63 };
64 64
65 gpio-poweroff { 65 gpio-poweroff {
66 compatible = "gpio-poweroff"; 66 compatible = "gpio-poweroff";
67 gpios = <&gpio0 1 GPIO_ACTIVE_ 67 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
68 }; 68 };
69 69
70 panel { 70 panel {
71 compatible = "ti,tilcdc,panel" 71 compatible = "ti,tilcdc,panel";
72 pinctrl-names = "default", "sl 72 pinctrl-names = "default", "sleep";
73 pinctrl-0 = <&lcd_pins_default 73 pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
74 pinctrl-1 = <&lcd_pins_sleep>; 74 pinctrl-1 = <&lcd_pins_sleep>;
75 75
76 display-timings { 76 display-timings {
77 timing-320x240 { 77 timing-320x240 {
78 hactive 78 hactive = <320>;
79 vactive 79 vactive = <240>;
80 hback-porch 80 hback-porch = <68>;
81 hfront-porch 81 hfront-porch = <20>;
82 hsync-len 82 hsync-len = <1>;
83 vback-porch 83 vback-porch = <18>;
84 vfront-porch 84 vfront-porch = <4>;
85 vsync-len 85 vsync-len = <1>;
86 clock-frequenc 86 clock-frequency = <9000000>;
87 hsync-active 87 hsync-active = <0>;
88 vsync-active 88 vsync-active = <0>;
89 }; 89 };
90 }; 90 };
91 panel-info { 91 panel-info {
92 ac-bias = <2 92 ac-bias = <255>;
93 ac-bias-intrpt = <0 93 ac-bias-intrpt = <0>;
94 dma-burst-sz = <1 94 dma-burst-sz = <16>;
95 bpp = <2 95 bpp = <24>;
96 bus-width = <1 96 bus-width = <16>;
97 fdd = <0 97 fdd = <0x80>;
98 sync-edge = <0 98 sync-edge = <0>;
99 sync-ctrl = <1 99 sync-ctrl = <1>;
100 raster-order = <0 100 raster-order = <0>;
101 fifo-th = <0 101 fifo-th = <0>;
102 }; 102 };
103 103
104 }; 104 };
105 105
106 guardian_beeper: pwm-7 { 106 guardian_beeper: pwm-7 {
107 compatible = "ti,omap-dmtimer- 107 compatible = "ti,omap-dmtimer-pwm";
108 #pwm-cells = <3>; 108 #pwm-cells = <3>;
109 ti,timers = <&timer7>; 109 ti,timers = <&timer7>;
110 pinctrl-names = "default"; 110 pinctrl-names = "default";
111 pinctrl-0 = <&guardian_beeper_ 111 pinctrl-0 = <&guardian_beeper_pins>;
112 ti,clock-source = <0x01>; 112 ti,clock-source = <0x01>;
113 }; 113 };
114 114
115 vmmcsd_fixed: fixedregulator0 { 115 vmmcsd_fixed: fixedregulator0 {
116 compatible = "regulator-fixed" 116 compatible = "regulator-fixed";
117 regulator-name = "vmmcsd_fixed 117 regulator-name = "vmmcsd_fixed";
118 regulator-min-microvolt = <330 118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <330 119 regulator-max-microvolt = <3300000>;
120 }; 120 };
121 121
122 mt_keypad: mt_keypad@0 { 122 mt_keypad: mt_keypad@0 {
123 compatible = "gpio-mt-keypad"; 123 compatible = "gpio-mt-keypad";
124 debounce-delay-ms = <10>; 124 debounce-delay-ms = <10>;
125 col-scan-delay-us = <2>; 125 col-scan-delay-us = <2>;
126 keypad,num-lines = <5>; 126 keypad,num-lines = <5>;
127 linux,no-autorepeat; 127 linux,no-autorepeat;
128 gpio-activelow; 128 gpio-activelow;
129 line-gpios = < 129 line-gpios = <
130 &gpio1 24 GPIO_ACTIVE_ 130 &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/
131 &gpio1 23 GPIO_ACTIVE_ 131 &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/
132 &gpio1 22 GPIO_ACTIVE_ 132 &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/
133 &gpio1 20 GPIO_ACTIVE_ 133 &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/
134 &gpio1 16 GPIO_ACTIVE_ 134 &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/
135 >; 135 >;
136 }; 136 };
137 }; 137 };
138 138
139 &elm { 139 &elm {
140 status = "okay"; 140 status = "okay";
141 }; 141 };
142 142
143 &gpmc { 143 &gpmc {
144 pinctrl-names = "default"; 144 pinctrl-names = "default";
145 pinctrl-0 = <&nandflash_pins>; 145 pinctrl-0 = <&nandflash_pins>;
146 ranges = <0 0 0x08000000 0x1000000>; 146 ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
147 status = "okay"; 147 status = "okay";
148 148
149 nand@0,0 { 149 nand@0,0 {
150 compatible = "ti,omap2-nand"; 150 compatible = "ti,omap2-nand";
151 reg = <0 0 4>; /* CS0, offset 151 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
152 interrupt-parent = <&gpmc>; 152 interrupt-parent = <&gpmc>;
153 interrupts = <0 IRQ_TYPE_NONE> 153 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
154 <1 IRQ_TYPE_NONE> 154 <1 IRQ_TYPE_NONE>; /* termcount */
155 rb-gpios = <&gpmc 0 GPIO_ACTIV 155 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
156 ti,nand-xfer-type = "prefetch- 156 ti,nand-xfer-type = "prefetch-dma";
157 ti,nand-ecc-opt = "bch16"; 157 ti,nand-ecc-opt = "bch16";
158 ti,elm-id = <&elm>; 158 ti,elm-id = <&elm>;
159 nand-bus-width = <8>; 159 nand-bus-width = <8>;
160 gpmc,device-width = <1>; 160 gpmc,device-width = <1>;
161 gpmc,sync-clk-ps = <0>; 161 gpmc,sync-clk-ps = <0>;
162 gpmc,cs-on-ns = <0>; 162 gpmc,cs-on-ns = <0>;
163 gpmc,cs-rd-off-ns = <30>; 163 gpmc,cs-rd-off-ns = <30>;
164 gpmc,cs-wr-off-ns = <30>; 164 gpmc,cs-wr-off-ns = <30>;
165 gpmc,adv-on-ns = <0>; 165 gpmc,adv-on-ns = <0>;
166 gpmc,adv-rd-off-ns = <30>; 166 gpmc,adv-rd-off-ns = <30>;
167 gpmc,adv-wr-off-ns = <30>; 167 gpmc,adv-wr-off-ns = <30>;
168 gpmc,we-on-ns = <0>; 168 gpmc,we-on-ns = <0>;
169 gpmc,we-off-ns = <15>; 169 gpmc,we-off-ns = <15>;
170 gpmc,oe-on-ns = <1>; 170 gpmc,oe-on-ns = <1>;
171 gpmc,oe-off-ns = <15>; 171 gpmc,oe-off-ns = <15>;
172 gpmc,access-ns = <30>; 172 gpmc,access-ns = <30>;
173 gpmc,rd-cycle-ns = <30>; 173 gpmc,rd-cycle-ns = <30>;
174 gpmc,wr-cycle-ns = <30>; 174 gpmc,wr-cycle-ns = <30>;
175 gpmc,bus-turnaround-ns = <0>; 175 gpmc,bus-turnaround-ns = <0>;
176 gpmc,cycle2cycle-delay-ns = <0 176 gpmc,cycle2cycle-delay-ns = <0>;
177 gpmc,clk-activation-ns = <0>; 177 gpmc,clk-activation-ns = <0>;
178 gpmc,wr-access-ns = <0>; 178 gpmc,wr-access-ns = <0>;
179 gpmc,wr-data-mux-bus-ns = <0>; 179 gpmc,wr-data-mux-bus-ns = <0>;
180 180
181 /* 181 /*
182 * MTD partition table 182 * MTD partition table
183 * 183 *
184 * All SPL-* partitions are si 184 * All SPL-* partitions are sized to minimal length which can
185 * be independently programmab 185 * be independently programmable. For NAND flash this is equal
186 * to size of erase-block. 186 * to size of erase-block.
187 */ 187 */
188 #address-cells = <1>; 188 #address-cells = <1>;
189 #size-cells = <1>; 189 #size-cells = <1>;
190 190
191 partition@0 { 191 partition@0 {
192 label = "SPL"; 192 label = "SPL";
193 reg = <0x0 0x40000>; 193 reg = <0x0 0x40000>;
194 }; 194 };
195 195
196 partition@1 { 196 partition@1 {
197 label = "SPL.backup1"; 197 label = "SPL.backup1";
198 reg = <0x40000 0x4000 198 reg = <0x40000 0x40000>;
199 }; 199 };
200 200
201 partition@2 { 201 partition@2 {
202 label = "SPL.backup2"; 202 label = "SPL.backup2";
203 reg = <0x80000 0x4000 203 reg = <0x80000 0x40000>;
204 }; 204 };
205 205
206 partition@3 { 206 partition@3 {
207 label = "SPL.backup3"; 207 label = "SPL.backup3";
208 reg = <0xc0000 0x4000 208 reg = <0xc0000 0x40000>;
209 }; 209 };
210 210
211 partition@4 { 211 partition@4 {
212 label = "u-boot"; 212 label = "u-boot";
213 reg = <0x100000 0x1000 213 reg = <0x100000 0x100000>;
214 }; 214 };
215 215
216 partition@5 { 216 partition@5 {
217 label = "u-boot.backup 217 label = "u-boot.backup1";
218 reg = <0x200000 0x1000 218 reg = <0x200000 0x100000>;
219 }; 219 };
220 220
221 partition@6 { 221 partition@6 {
222 label = "u-boot-2"; 222 label = "u-boot-2";
223 reg = <0x300000 0x1000 223 reg = <0x300000 0x100000>;
224 }; 224 };
225 225
226 partition@7 { 226 partition@7 {
227 label = "u-boot-2.back 227 label = "u-boot-2.backup1";
228 reg = <0x400000 0x1000 228 reg = <0x400000 0x100000>;
229 }; 229 };
230 230
231 partition@8 { 231 partition@8 {
232 label = "u-boot-env"; 232 label = "u-boot-env";
233 reg = <0x500000 0x4000 233 reg = <0x500000 0x40000>;
234 }; 234 };
235 235
236 partition@9 { 236 partition@9 {
237 label = "u-boot-env.ba 237 label = "u-boot-env.backup1";
238 reg = <0x540000 0x4000 238 reg = <0x540000 0x40000>;
239 }; 239 };
240 240
241 partition@10 { 241 partition@10 {
242 label = "splash-screen 242 label = "splash-screen";
243 reg = <0x580000 0x4000 243 reg = <0x580000 0x40000>;
244 }; 244 };
245 245
246 partition@11 { 246 partition@11 {
247 label = "UBI"; 247 label = "UBI";
248 reg = <0x5c0000 0x1fa4 248 reg = <0x5c0000 0x1fa40000>;
249 }; 249 };
250 }; 250 };
251 }; 251 };
252 252
253 &i2c0 { 253 &i2c0 {
254 pinctrl-names = "default"; 254 pinctrl-names = "default";
255 pinctrl-0 = <&i2c0_pins>; 255 pinctrl-0 = <&i2c0_pins>;
256 clock-frequency = <400000>; 256 clock-frequency = <400000>;
257 status = "okay"; 257 status = "okay";
258 258
259 tps: tps@24 { 259 tps: tps@24 {
260 reg = <0x24>; 260 reg = <0x24>;
261 }; 261 };
262 }; 262 };
263 263
264 &lcdc { 264 &lcdc {
265 blue-and-red-wiring = "crossed"; 265 blue-and-red-wiring = "crossed";
266 status = "okay"; 266 status = "okay";
267 port { 267 port {
268 lcdc_0: endpoint@0 { 268 lcdc_0: endpoint@0 {
269 remote-endpoint = <0>; 269 remote-endpoint = <0>;
270 }; 270 };
271 }; 271 };
272 }; 272 };
273 273
274 &mmc1 { 274 &mmc1 {
275 bus-width = <0x4>; 275 bus-width = <0x4>;
276 pinctrl-names = "default"; 276 pinctrl-names = "default";
277 pinctrl-0 = <&mmc1_pins>; 277 pinctrl-0 = <&mmc1_pins>;
278 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 278 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
279 vmmc-supply = <&vmmcsd_fixed>; 279 vmmc-supply = <&vmmcsd_fixed>;
280 status = "okay"; 280 status = "okay";
281 }; 281 };
282 282
283 &rtc { 283 &rtc {
284 clocks = <&clk_32768_ck>, <&clk_24mhz_ 284 clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
285 clock-names = "ext-clk", "int-clk"; 285 clock-names = "ext-clk", "int-clk";
286 }; 286 };
287 287
288 &spi0 { 288 &spi0 {
289 ti,pindir-d0-out-d1-in; 289 ti,pindir-d0-out-d1-in;
290 pinctrl-names = "default"; 290 pinctrl-names = "default";
291 pinctrl-0 = <&spi0_pins>; 291 pinctrl-0 = <&spi0_pins>;
292 status = "okay"; 292 status = "okay";
293 }; 293 };
294 294
295 #include "../../tps65217.dtsi" 295 #include "../../tps65217.dtsi"
296 296
297 &tps { 297 &tps {
298 /* 298 /*
299 * Configure pmic to enter OFF-state instead 299 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
300 * mode") at poweroff. Most BeagleBone vers 300 * mode") at poweroff. Most BeagleBone versions do not support RTC-only
301 * mode and risk hardware damage if this mod 301 * mode and risk hardware damage if this mode is entered.
302 * 302 *
303 * For details, see linux-omap mailing list 303 * For details, see linux-omap mailing list May 2015 thread
304 * [PATCH] ARM: dts: am335x-bone* enable pm 304 * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
305 * In particular, messages: 305 * In particular, messages:
306 * https://www.spinics.net/lists/linux-omap 306 * https://www.spinics.net/lists/linux-omap/msg118585.html
307 * https://www.spinics.net/lists/linux-omap 307 * https://www.spinics.net/lists/linux-omap/msg118615.html
308 * 308 *
309 * You can override this later with 309 * You can override this later with
310 * &tps { /delete-property/ ti,pmic-shutdo 310 * &tps { /delete-property/ ti,pmic-shutdown-controller; }
311 * if you want to use RTC-only mode and made 311 * if you want to use RTC-only mode and made sure you are not affected
312 * by the hardware problems. (Tip: double-ch 312 * by the hardware problems. (Tip: double-check by performing a current
313 * measurement after shutdown: it should be 313 * measurement after shutdown: it should be less than 1 mA.)
314 */ 314 */
315 ti,pmic-shutdown-controller; 315 ti,pmic-shutdown-controller;
316 interrupt-parent = <&intc>; 316 interrupt-parent = <&intc>;
317 interrupts = <7>; /* NMI */ 317 interrupts = <7>; /* NMI */
318 318
319 backlight { 319 backlight {
320 isel = <1>; /* 1 - ISET1, 2 I 320 isel = <1>; /* 1 - ISET1, 2 ISET2 */
321 fdim = <500>; /* TPS65217_BL_F 321 fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
322 default-brightness = <50>; 322 default-brightness = <50>;
323 /* 1(on) - enable current sink 323 /* 1(on) - enable current sink, while initialization */
324 /* 0(off) - disable current si 324 /* 0(off) - disable current sink, while initialization */
325 isink-en = <1>; 325 isink-en = <1>;
326 }; 326 };
327 327
328 regulators { 328 regulators {
329 dcdc1_reg: regulator@0 { 329 dcdc1_reg: regulator@0 {
330 regulator-name = "vdds 330 regulator-name = "vdds_dpr";
331 regulator-always-on; 331 regulator-always-on;
332 }; 332 };
333 333
334 dcdc2_reg: regulator@1 { 334 dcdc2_reg: regulator@1 {
335 /* VDD_MPU voltage lim 335 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
336 regulator-name = "vdd_ 336 regulator-name = "vdd_mpu";
337 regulator-min-microvol 337 regulator-min-microvolt = <925000>;
338 regulator-max-microvol 338 regulator-max-microvolt = <1351500>;
339 regulator-boot-on; 339 regulator-boot-on;
340 regulator-always-on; 340 regulator-always-on;
341 }; 341 };
342 342
343 dcdc3_reg: regulator@2 { 343 dcdc3_reg: regulator@2 {
344 /* VDD_CORE voltage li 344 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
345 regulator-name = "vdd_ 345 regulator-name = "vdd_core";
346 regulator-min-microvol 346 regulator-min-microvolt = <925000>;
347 regulator-max-microvol 347 regulator-max-microvolt = <1150000>;
348 regulator-boot-on; 348 regulator-boot-on;
349 regulator-always-on; 349 regulator-always-on;
350 }; 350 };
351 351
352 ldo1_reg: regulator@3 { 352 ldo1_reg: regulator@3 {
353 regulator-name = "vio, 353 regulator-name = "vio,vrtc,vdds";
354 regulator-always-on; 354 regulator-always-on;
355 }; 355 };
356 356
357 ldo2_reg: regulator@4 { 357 ldo2_reg: regulator@4 {
358 regulator-name = "vdd_ 358 regulator-name = "vdd_3v3aux";
359 regulator-always-on; 359 regulator-always-on;
360 }; 360 };
361 361
362 ldo3_reg: regulator@5 { 362 ldo3_reg: regulator@5 {
363 regulator-name = "vdd_ 363 regulator-name = "vdd_1v8";
364 regulator-min-microvol 364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvol 365 regulator-max-microvolt = <1800000>;
366 regulator-always-on; 366 regulator-always-on;
367 }; 367 };
368 368
369 ldo4_reg: regulator@6 { 369 ldo4_reg: regulator@6 {
370 regulator-name = "vdd_ 370 regulator-name = "vdd_3v3a";
371 regulator-always-on; 371 regulator-always-on;
372 }; 372 };
373 }; 373 };
374 }; 374 };
375 375
376 &tscadc { 376 &tscadc {
377 status = "okay"; 377 status = "okay";
378 378
379 adc { 379 adc {
380 ti,adc-channels = <0 1 2 3 4 5 380 ti,adc-channels = <0 1 2 3 4 5 6>;
381 }; 381 };
382 }; 382 };
383 383
384 &gpio0 { 384 &gpio0 {
385 gpio-line-names = 385 gpio-line-names =
386 "", 386 "",
387 "", 387 "",
388 "", 388 "",
389 "", 389 "",
390 "", 390 "",
391 "", 391 "",
392 "", 392 "",
393 "", 393 "",
394 "", 394 "",
395 "", 395 "",
396 "", 396 "",
397 "", 397 "",
398 "", 398 "",
399 "", 399 "",
400 "", 400 "",
401 "", 401 "",
402 "", 402 "",
403 "", 403 "",
404 "", 404 "",
405 "", 405 "",
406 "", 406 "",
407 "", 407 "",
408 "", 408 "",
409 "", 409 "",
410 "", 410 "",
411 "", 411 "",
412 "", 412 "",
413 "", 413 "",
414 "", 414 "",
415 "MirxWakeup", 415 "MirxWakeup",
416 "", 416 "",
417 ""; 417 "";
418 }; 418 };
419 419
420 &gpio3 { 420 &gpio3 {
421 ti,gpio-always-on; 421 ti,gpio-always-on;
422 ti,no-reset-on-init; 422 ti,no-reset-on-init;
423 gpio-line-names = 423 gpio-line-names =
424 "", 424 "",
425 "MirxBtReset", 425 "MirxBtReset",
426 "", 426 "",
427 "CcVolAdcEn", 427 "CcVolAdcEn",
428 "MirxBlePause", 428 "MirxBlePause",
429 "", 429 "",
430 "", 430 "",
431 "", 431 "",
432 "", 432 "",
433 "", 433 "",
434 "", 434 "",
435 "", 435 "",
436 "", 436 "",
437 "", 437 "",
438 "AspEn", 438 "AspEn",
439 "", 439 "",
440 "", 440 "",
441 "", 441 "",
442 "", 442 "",
443 "", 443 "",
444 "", 444 "",
445 "BatVolAdcEn", 445 "BatVolAdcEn",
446 "", 446 "",
447 "", 447 "",
448 "", 448 "",
449 "", 449 "",
450 "", 450 "",
451 "", 451 "",
452 "", 452 "",
453 "", 453 "",
454 "", 454 "",
455 ""; 455 "";
456 }; 456 };
457 457
458 &uart0 { 458 &uart0 {
459 pinctrl-names = "default"; 459 pinctrl-names = "default";
460 pinctrl-0 = <&uart0_pins>; 460 pinctrl-0 = <&uart0_pins>;
461 status = "okay"; 461 status = "okay";
462 }; 462 };
463 463
464 &uart2 { 464 &uart2 {
465 pinctrl-names = "default"; 465 pinctrl-names = "default";
466 pinctrl-0 = <&uart2_pins>; 466 pinctrl-0 = <&uart2_pins>;
467 status = "okay"; 467 status = "okay";
468 }; 468 };
469 469
470 &usb0 { 470 &usb0 {
471 dr_mode = "peripheral"; 471 dr_mode = "peripheral";
472 }; 472 };
473 473
474 &usb1 { 474 &usb1 {
475 dr_mode = "host"; 475 dr_mode = "host";
476 /delete-property/dmas; 476 /delete-property/dmas;
477 /delete-property/dma-names; 477 /delete-property/dma-names;
478 }; 478 };
479 479
480 &am33xx_pinmux { 480 &am33xx_pinmux {
481 pinctrl-names = "default"; 481 pinctrl-names = "default";
482 pinctrl-0 = <&clkout2_pin &guardian_in 482 pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
483 483
484 clkout2_pin: clkout2-pins { 484 clkout2_pin: clkout2-pins {
485 pinctrl-single,pins = < 485 pinctrl-single,pins = <
486 /* xdma_event_intr1.cl 486 /* xdma_event_intr1.clkout2 */
487 AM33XX_IOPAD(0x9b4, PI 487 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
488 >; 488 >;
489 }; 489 };
490 490
491 guardian_interface_pins: interface-pin 491 guardian_interface_pins: interface-pins {
492 pinctrl-single,pins = < 492 pinctrl-single,pins = <
493 /* ADC_BATSENSE_EN */ 493 /* ADC_BATSENSE_EN */
494 /* (A14) MCASP0_AHCLKx 494 /* (A14) MCASP0_AHCLKx.gpio3[21] */
495 AM33XX_IOPAD(0x9ac, PI 495 AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
496 /* ADC_COINCELL_EN */ 496 /* ADC_COINCELL_EN */
497 /* (J16) MII1_TX_EN.gp 497 /* (J16) MII1_TX_EN.gpio3[3] */
498 AM33XX_IOPAD(0x914, PI 498 AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
499 /* ASP_ENABLE */ 499 /* ASP_ENABLE */
500 /* (A13) MCASP0_ACLKx. 500 /* (A13) MCASP0_ACLKx.gpio3[14] */
501 AM33XX_IOPAD(0x990, PI 501 AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
502 /* (D16) uart1_rxd.uar 502 /* (D16) uart1_rxd.uart1_rxd */
503 AM33XX_IOPAD(0x980, PI 503 AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
504 /* (D15) uart1_txd.uar 504 /* (D15) uart1_txd.uart1_txd */
505 AM33XX_IOPAD(0x984, PI 505 AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
506 /*SWITCH-OFF_3V6*/ 506 /*SWITCH-OFF_3V6*/
507 /* (M18) gpio0[1] */ 507 /* (M18) gpio0[1] */
508 AM33XX_IOPAD(0x94c, PI 508 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
509 /* MIRACULIX */ 509 /* MIRACULIX */
510 /* (H17) gmii1_crs.gpi 510 /* (H17) gmii1_crs.gpio3[1] */
511 AM33XX_IOPAD(0x90c, PI 511 AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
512 /* (H18) rmii1_refclk. 512 /* (H18) rmii1_refclk.gpio0[29] */
513 AM33XX_IOPAD(0x944, PI 513 AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
514 /* (J18) gmii1_txd3.gp 514 /* (J18) gmii1_txd3.gpio0[16] */
515 AM33XX_IOPAD(0x91c, PI 515 AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 )
516 /* (J17) gmii1_rxdv.gp 516 /* (J17) gmii1_rxdv.gpio3[4] */
517 AM33XX_IOPAD(0x918, PI 517 AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
518 >; 518 >;
519 }; 519 };
520 520
521 guardian_beeper_pins: dmtimer7-pins { 521 guardian_beeper_pins: dmtimer7-pins {
522 pinctrl-single,pins = < 522 pinctrl-single,pins = <
523 AM33XX_IOPAD(0x968, PI 523 AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
524 >; 524 >;
525 }; 525 };
526 526
527 guardian_button_pins: guardian-button- 527 guardian_button_pins: guardian-button-pins {
528 pinctrl-single,pins = < 528 pinctrl-single,pins = <
529 AM33XX_IOPAD(0x940, PI 529 AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
530 AM33XX_IOPAD(0x884, PI 530 AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */
531 >; 531 >;
532 }; 532 };
533 533
534 534
535 i2c0_pins: i2c0-pins { 535 i2c0_pins: i2c0-pins {
536 pinctrl-single,pins = < 536 pinctrl-single,pins = <
537 AM33XX_IOPAD(0x988, PI 537 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
538 AM33XX_IOPAD(0x98c, PI 538 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
539 >; 539 >;
540 }; 540 };
541 541
542 led_bl_pins: gpio-led-bl-pins { 542 led_bl_pins: gpio-led-bl-pins {
543 pinctrl-single,pins = < 543 pinctrl-single,pins = <
544 /* P9_14, gpmc_a[2].GP 544 /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
545 AM33XX_IOPAD(0x848, PI 545 AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
546 >; 546 >;
547 }; 547 };
548 548
549 lcd_disen_pins: lcd-disen-pins { 549 lcd_disen_pins: lcd-disen-pins {
550 pinctrl-single,pins = < 550 pinctrl-single,pins = <
551 /* P9_27, mcasp0_fsr.g 551 /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
552 AM33XX_IOPAD(0x9a4, PI 552 AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
553 >; 553 >;
554 }; 554 };
555 555
556 lcd_pins_default: lcd-default-pins { 556 lcd_pins_default: lcd-default-pins {
557 pinctrl-single,pins = < 557 pinctrl-single,pins = <
558 /* (U10) gpmc_ad8.lcd_ 558 /* (U10) gpmc_ad8.lcd_data23 */
559 AM33XX_IOPAD(0x820, PI 559 AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
560 /* (T10) gpmc_ad9.lcd_ 560 /* (T10) gpmc_ad9.lcd_data22 */
561 AM33XX_IOPAD(0x824, PI 561 AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
562 /* (T11) gpmc_ad10.lcd 562 /* (T11) gpmc_ad10.lcd_data21 */
563 AM33XX_IOPAD(0x828, PI 563 AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
564 /* (U12) gpmc_ad11.lcd 564 /* (U12) gpmc_ad11.lcd_data20 */
565 AM33XX_IOPAD(0x82c, PI 565 AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
566 /* (T12) gpmc_ad12.lcd 566 /* (T12) gpmc_ad12.lcd_data19 */
567 AM33XX_IOPAD(0x830, PI 567 AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
568 /* (R12) gpmc_ad13.lcd 568 /* (R12) gpmc_ad13.lcd_data18 */
569 AM33XX_IOPAD(0x834, PI 569 AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
570 /* (V13) gpmc_ad14.lcd 570 /* (V13) gpmc_ad14.lcd_data17 */
571 AM33XX_IOPAD(0x838, PI 571 AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
572 /* (U13) gpmc_ad15.lcd 572 /* (U13) gpmc_ad15.lcd_data16 */
573 AM33XX_IOPAD(0x83c, PI 573 AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
574 /* lcd_data0.lcd_data0 574 /* lcd_data0.lcd_data0 */
575 AM33XX_IOPAD(0x8a0, PI 575 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
576 /* lcd_data1.lcd_data1 576 /* lcd_data1.lcd_data1 */
577 AM33XX_IOPAD(0x8a4, PI 577 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
578 /* lcd_data2.lcd_data2 578 /* lcd_data2.lcd_data2 */
579 AM33XX_IOPAD(0x8a8, PI 579 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
580 /* lcd_data3.lcd_data3 580 /* lcd_data3.lcd_data3 */
581 AM33XX_IOPAD(0x8ac, PI 581 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
582 /* lcd_data4.lcd_data4 582 /* lcd_data4.lcd_data4 */
583 AM33XX_IOPAD(0x8b0, PI 583 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
584 /* lcd_data5.lcd_data5 584 /* lcd_data5.lcd_data5 */
585 AM33XX_IOPAD(0x8b4, PI 585 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
586 /* lcd_data6.lcd_data6 586 /* lcd_data6.lcd_data6 */
587 AM33XX_IOPAD(0x8b8, PI 587 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
588 /* lcd_data7.lcd_data7 588 /* lcd_data7.lcd_data7 */
589 AM33XX_IOPAD(0x8bc, PI 589 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
590 /* lcd_data8.lcd_data8 590 /* lcd_data8.lcd_data8 */
591 AM33XX_IOPAD(0x8c0, PI 591 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
592 /* lcd_data9.lcd_data9 592 /* lcd_data9.lcd_data9 */
593 AM33XX_IOPAD(0x8c4, PI 593 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
594 /* lcd_data10.lcd_data 594 /* lcd_data10.lcd_data10 */
595 AM33XX_IOPAD(0x8c8, PI 595 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
596 /* lcd_data11.lcd_data 596 /* lcd_data11.lcd_data11 */
597 AM33XX_IOPAD(0x8cc, PI 597 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
598 /* lcd_data12.lcd_data 598 /* lcd_data12.lcd_data12 */
599 AM33XX_IOPAD(0x8d0, PI 599 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
600 /* lcd_data13.lcd_data 600 /* lcd_data13.lcd_data13 */
601 AM33XX_IOPAD(0x8d4, PI 601 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
602 /* lcd_data14.lcd_data 602 /* lcd_data14.lcd_data14 */
603 AM33XX_IOPAD(0x8d8, PI 603 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
604 /* lcd_data15.lcd_data 604 /* lcd_data15.lcd_data15 */
605 AM33XX_IOPAD(0x8dc, PI 605 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
606 /* lcd_vsync.lcd_vsync 606 /* lcd_vsync.lcd_vsync */
607 AM33XX_IOPAD(0x8e0, PI 607 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
608 /* lcd_hsync.lcd_hsync 608 /* lcd_hsync.lcd_hsync */
609 AM33XX_IOPAD(0x8e4, PI 609 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
610 /* lcd_pclk.lcd_pclk * 610 /* lcd_pclk.lcd_pclk */
611 AM33XX_IOPAD(0x8e8, PI 611 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
612 /* lcd_ac_bias_en.lcd_ 612 /* lcd_ac_bias_en.lcd_ac_bias_en */
613 AM33XX_IOPAD(0x8ec, PI 613 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
614 >; 614 >;
615 }; 615 };
616 616
617 lcd_pins_sleep: lcd-sleep-pins { 617 lcd_pins_sleep: lcd-sleep-pins {
618 pinctrl-single,pins = < 618 pinctrl-single,pins = <
619 /* lcd_data0.lcd_data0 619 /* lcd_data0.lcd_data0 */
620 AM33XX_IOPAD(0x8a0, PU 620 AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
621 /* lcd_data1.lcd_data1 621 /* lcd_data1.lcd_data1 */
622 AM33XX_IOPAD(0x8a4, PU 622 AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
623 /* lcd_data2.lcd_data2 623 /* lcd_data2.lcd_data2 */
624 AM33XX_IOPAD(0x8a8, PU 624 AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
625 /* lcd_data3.lcd_data3 625 /* lcd_data3.lcd_data3 */
626 AM33XX_IOPAD(0x8ac, PU 626 AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
627 /* lcd_data4.lcd_data4 627 /* lcd_data4.lcd_data4 */
628 AM33XX_IOPAD(0x8b0, PU 628 AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
629 /* lcd_data5.lcd_data5 629 /* lcd_data5.lcd_data5 */
630 AM33XX_IOPAD(0x8b4, PU 630 AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
631 /* lcd_data6.lcd_data6 631 /* lcd_data6.lcd_data6 */
632 AM33XX_IOPAD(0x8b8, PU 632 AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
633 /* lcd_data7.lcd_data7 633 /* lcd_data7.lcd_data7 */
634 AM33XX_IOPAD(0x8bc, PU 634 AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
635 /* lcd_data8.lcd_data8 635 /* lcd_data8.lcd_data8 */
636 AM33XX_IOPAD(0x8c0, PU 636 AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
637 /* lcd_data9.lcd_data9 637 /* lcd_data9.lcd_data9 */
638 AM33XX_IOPAD(0x8c4, PU 638 AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
639 /* lcd_data10.lcd_data 639 /* lcd_data10.lcd_data10 */
640 AM33XX_IOPAD(0x8c8, PU 640 AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
641 /* lcd_data11.lcd_data 641 /* lcd_data11.lcd_data11 */
642 AM33XX_IOPAD(0x8cc, PU 642 AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
643 /* lcd_data12.lcd_data 643 /* lcd_data12.lcd_data12 */
644 AM33XX_IOPAD(0x8d0, PU 644 AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
645 /* lcd_data13.lcd_data 645 /* lcd_data13.lcd_data13 */
646 AM33XX_IOPAD(0x8d4, PU 646 AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
647 /* lcd_data14.lcd_data 647 /* lcd_data14.lcd_data14 */
648 AM33XX_IOPAD(0x8d8, PU 648 AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
649 /* lcd_data15.lcd_data 649 /* lcd_data15.lcd_data15 */
650 AM33XX_IOPAD(0x8dc, PU 650 AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
651 /* lcd_vsync.lcd_vsync 651 /* lcd_vsync.lcd_vsync */
652 AM33XX_IOPAD(0x8e0, PI 652 AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
653 /* lcd_hsync.lcd_hsync 653 /* lcd_hsync.lcd_hsync */
654 AM33XX_IOPAD(0x8e4, PI 654 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
655 /* lcd_pclk.lcd_pclk * 655 /* lcd_pclk.lcd_pclk */
656 AM33XX_IOPAD(0x8e8, PI 656 AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
657 /* lcd_ac_bias_en.lcd_ 657 /* lcd_ac_bias_en.lcd_ac_bias_en */
658 AM33XX_IOPAD(0x8ec, PI 658 AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
659 >; 659 >;
660 }; 660 };
661 661
662 guardian_led_pins: guardian-led-pins { 662 guardian_led_pins: guardian-led-pins {
663 pinctrl-single,pins = < 663 pinctrl-single,pins = <
664 AM33XX_IOPAD(0x868, PI 664 AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
665 >; 665 >;
666 }; 666 };
667 667
668 mmc1_pins: mmc1-pins { 668 mmc1_pins: mmc1-pins {
669 pinctrl-single,pins = < 669 pinctrl-single,pins = <
670 AM33XX_IOPAD(0x8f0, PI 670 AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
671 AM33XX_IOPAD(0x8f4, PI 671 AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
672 AM33XX_IOPAD(0x8f8, PI 672 AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
673 AM33XX_IOPAD(0x8fc, PI 673 AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
674 AM33XX_IOPAD(0x900, PI 674 AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
675 AM33XX_IOPAD(0x904, PI 675 AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
676 AM33XX_IOPAD(0x960, PI 676 AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
677 >; 677 >;
678 }; 678 };
679 679
680 spi0_pins: spi0-pins { 680 spi0_pins: spi0-pins {
681 pinctrl-single,pins = < 681 pinctrl-single,pins = <
682 /* SPI0_CLK - spi0_cl 682 /* SPI0_CLK - spi0_clk.spi */
683 AM33XX_IOPAD(0x950, PI 683 AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
684 /* SPI0_MOSI - spi0_d0 684 /* SPI0_MOSI - spi0_d0.spi0 */
685 AM33XX_IOPAD(0x954, PI 685 AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
686 /* SPI0_MISO - spi0_d1 686 /* SPI0_MISO - spi0_d1.spi0 */
687 AM33XX_IOPAD(0x958, PI 687 AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
688 /* SPI0_CS0 - spi */ 688 /* SPI0_CS0 - spi */
689 AM33XX_IOPAD(0x95c, PI 689 AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
690 >; 690 >;
691 }; 691 };
692 692
693 uart0_pins: uart0-pins { 693 uart0_pins: uart0-pins {
694 pinctrl-single,pins = < 694 pinctrl-single,pins = <
695 /* uart0_rxd.uart0_rxd 695 /* uart0_rxd.uart0_rxd */
696 AM33XX_IOPAD(0x970, PI 696 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
697 /* uart0_txd.uart0_txd 697 /* uart0_txd.uart0_txd */
698 AM33XX_IOPAD(0x974, PI 698 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
699 >; 699 >;
700 }; 700 };
701 701
702 uart2_pins: uart2-pins { 702 uart2_pins: uart2-pins {
703 pinctrl-single,pins = < 703 pinctrl-single,pins = <
704 /* K18 uart2_rxd.mirx_ 704 /* K18 uart2_rxd.mirx_txd */
705 AM33XX_IOPAD(0x92c, PI 705 AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
706 /* L18 uart2_txd.mirx_ 706 /* L18 uart2_txd.mirx_rxd */
707 AM33XX_IOPAD(0x930, PI 707 AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
708 >; 708 >;
709 }; 709 };
710 710
711 nandflash_pins: nandflash-pins { 711 nandflash_pins: nandflash-pins {
712 pinctrl-single,pins = < 712 pinctrl-single,pins = <
713 /* (U7) gpmc_ad0.gpmc_ 713 /* (U7) gpmc_ad0.gpmc_ad0 */
714 AM33XX_IOPAD(0x800, PI 714 AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
715 /* (V7) gpmc_ad1.gpmc_ 715 /* (V7) gpmc_ad1.gpmc_ad1 */
716 AM33XX_IOPAD(0x804, PI 716 AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
717 /* (R8) gpmc_ad2.gpmc_ 717 /* (R8) gpmc_ad2.gpmc_ad2 */
718 AM33XX_IOPAD(0x808, PI 718 AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
719 /* (T8) gpmc_ad3.gpmc_ 719 /* (T8) gpmc_ad3.gpmc_ad3 */
720 AM33XX_IOPAD(0x80c, PI 720 AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
721 /* (U8) gpmc_ad4.gpmc_ 721 /* (U8) gpmc_ad4.gpmc_ad4 */
722 AM33XX_IOPAD(0x810, PI 722 AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
723 /* (V8) gpmc_ad5.gpmc_ 723 /* (V8) gpmc_ad5.gpmc_ad5 */
724 AM33XX_IOPAD(0x814, PI 724 AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
725 /* (R9) gpmc_ad6.gpmc_ 725 /* (R9) gpmc_ad6.gpmc_ad6 */
726 AM33XX_IOPAD(0x818, PI 726 AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
727 /* (T9) gpmc_ad7.gpmc_ 727 /* (T9) gpmc_ad7.gpmc_ad7 */
728 AM33XX_IOPAD(0x81c, PI 728 AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
729 /* (T17) gpmc_wait0.gp 729 /* (T17) gpmc_wait0.gpmc_wait0 */
730 AM33XX_IOPAD(0x870, PI 730 AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
731 /* (U17) gpmc_wpn.gpmc 731 /* (U17) gpmc_wpn.gpmc_wpn */
732 AM33XX_IOPAD(0x874, PI 732 AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
733 /* (V6) gpmc_csn0.gpmc 733 /* (V6) gpmc_csn0.gpmc_csn0 */
734 AM33XX_IOPAD(0x87c, PI 734 AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
735 /* (R7) gpmc_advn_ale. 735 /* (R7) gpmc_advn_ale.gpmc_advn_ale */
736 AM33XX_IOPAD(0x890, PI 736 AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
737 /* (T7) gpmc_oen_ren.g 737 /* (T7) gpmc_oen_ren.gpmc_oen_ren */
738 AM33XX_IOPAD(0x894, PI 738 AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
739 /* (U6) gpmc_wen.gpmc_ 739 /* (U6) gpmc_wen.gpmc_wen */
740 AM33XX_IOPAD(0x898, PI 740 AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
741 /* (T6) gpmc_be0n_cle. 741 /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
742 AM33XX_IOPAD(0x89c, PI 742 AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
743 >; 743 >;
744 }; 744 };
745 }; 745 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.