1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 /* 2 /*
3 * Copyright (C) 2014-2017 Phytec Messtechnik 3 * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
4 * Author: Wadim Egorov <w.egorov@phytec.de> 4 * Author: Wadim Egorov <w.egorov@phytec.de>
5 * Teresa Remmet <t.remmet@phytec.de> 5 * Teresa Remmet <t.remmet@phytec.de>
6 */ 6 */
7 7
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 9
10 / { 10 / {
11 model = "Phytec AM335x PCM-953"; 11 model = "Phytec AM335x PCM-953";
12 compatible = "phytec,am335x-pcm-953", 12 compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
13 13
14 /* Power */ 14 /* Power */
15 vcc3v3: fixedregulator1 { 15 vcc3v3: fixedregulator1 {
16 compatible = "regulator-fixed" 16 compatible = "regulator-fixed";
17 regulator-name = "vcc3v3"; 17 regulator-name = "vcc3v3";
18 regulator-min-microvolt = <330 18 regulator-min-microvolt = <3300000>;
19 regulator-max-microvolt = <330 19 regulator-max-microvolt = <3300000>;
20 regulator-boot-on; 20 regulator-boot-on;
21 }; 21 };
22 22
23 vcc1v8: fixedregulator2 { 23 vcc1v8: fixedregulator2 {
24 compatible = "regulator-fixed" 24 compatible = "regulator-fixed";
25 regulator-name = "vcc1v8"; 25 regulator-name = "vcc1v8";
26 regulator-min-microvolt = <180 26 regulator-min-microvolt = <1800000>;
27 regulator-max-microvolt = <180 27 regulator-max-microvolt = <1800000>;
28 regulator-boot-on; 28 regulator-boot-on;
29 }; 29 };
30 30
31 /* User IO */ 31 /* User IO */
32 user_leds: user-leds { 32 user_leds: user-leds {
33 compatible = "gpio-leds"; 33 compatible = "gpio-leds";
34 pinctrl-names = "default"; 34 pinctrl-names = "default";
35 pinctrl-0 = <&user_leds_pins>; 35 pinctrl-0 = <&user_leds_pins>;
36 36
37 user-led0 { 37 user-led0 {
38 gpios = <&gpio1 30 GPI 38 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
39 default-state = "on"; 39 default-state = "on";
40 }; 40 };
41 41
42 user-led1 { 42 user-led1 {
43 gpios = <&gpio1 31 GPI 43 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
44 default-state = "on"; 44 default-state = "on";
45 }; 45 };
46 }; 46 };
47 47
48 user_buttons: user-buttons { 48 user_buttons: user-buttons {
49 compatible = "gpio-keys"; 49 compatible = "gpio-keys";
50 pinctrl-names = "default"; 50 pinctrl-names = "default";
51 pinctrl-0 = <&user_buttons_pin 51 pinctrl-0 = <&user_buttons_pins>;
52 52
53 button-0 { 53 button-0 {
54 label = "home"; 54 label = "home";
55 linux,code = <KEY_HOME 55 linux,code = <KEY_HOME>;
56 gpios = <&gpio3 7 GPIO 56 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
57 wakeup-source; 57 wakeup-source;
58 }; 58 };
59 59
60 button-1 { 60 button-1 {
61 label = "menu"; 61 label = "menu";
62 linux,code = <KEY_MENU 62 linux,code = <KEY_MENU>;
63 gpios = <&gpio3 8 GPIO 63 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
64 wakeup-source; 64 wakeup-source;
65 }; 65 };
66 66
67 }; 67 };
68 }; 68 };
69 69
70 &am33xx_pinmux { 70 &am33xx_pinmux {
71 user_buttons_pins: pinmux-user-buttons 71 user_buttons_pins: pinmux-user-buttons-pins {
72 pinctrl-single,pins = < 72 pinctrl-single,pins = <
73 AM33XX_PADCONF(AM335X_ 73 AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */
74 AM33XX_PADCONF(AM335X_ 74 AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */
75 >; 75 >;
76 }; 76 };
77 77
78 user_leds_pins: pinmux-user-leds-pins 78 user_leds_pins: pinmux-user-leds-pins {
79 pinctrl-single,pins = < 79 pinctrl-single,pins = <
80 AM33XX_PADCONF(AM335X_ 80 AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */
81 AM33XX_PADCONF(AM335X_ 81 AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */
82 >; 82 >;
83 }; 83 };
84 }; 84 };
85 85
86 /* CAN */ 86 /* CAN */
87 &am33xx_pinmux { 87 &am33xx_pinmux {
88 dcan1_pins: pinmux-dcan1-pins { 88 dcan1_pins: pinmux-dcan1-pins {
89 pinctrl-single,pins = < 89 pinctrl-single,pins = <
90 AM33XX_PADCONF(AM335X_ 90 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */
91 AM33XX_PADCONF(AM335X_ 91 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */
92 >; 92 >;
93 }; 93 };
94 }; 94 };
95 95
96 &dcan1 { 96 &dcan1 {
97 pinctrl-names = "default"; 97 pinctrl-names = "default";
98 pinctrl-0 = <&dcan1_pins>; 98 pinctrl-0 = <&dcan1_pins>;
99 status = "okay"; 99 status = "okay";
100 }; 100 };
101 101
102 /* Ethernet */ 102 /* Ethernet */
103 &am33xx_pinmux { 103 &am33xx_pinmux {
104 ethernet1_pins: ethernet1-pins { 104 ethernet1_pins: ethernet1-pins {
105 pinctrl-single,pins = < 105 pinctrl-single,pins = <
106 AM33XX_PADCONF(AM335X_ 106 AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
107 AM33XX_PADCONF(AM335X_ 107 AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
108 AM33XX_PADCONF(AM335X_ 108 AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
109 AM33XX_PADCONF(AM335X_ 109 AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
110 AM33XX_PADCONF(AM335X_ 110 AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
111 AM33XX_PADCONF(AM335X_ 111 AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
112 AM33XX_PADCONF(AM335X_ 112 AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
113 AM33XX_PADCONF(AM335X_ 113 AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
114 AM33XX_PADCONF(AM335X_ 114 AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
115 AM33XX_PADCONF(AM335X_ 115 AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
116 AM33XX_PADCONF(AM335X_ 116 AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
117 AM33XX_PADCONF(AM335X_ 117 AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
118 >; 118 >;
119 }; 119 };
120 }; 120 };
121 121
122 &cpsw_port2 { 122 &cpsw_port2 {
123 phy-handle = <&phy1>; 123 phy-handle = <&phy1>;
124 phy-mode = "rgmii-id"; 124 phy-mode = "rgmii-id";
125 ti,dual-emac-pvid = <2>; 125 ti,dual-emac-pvid = <2>;
126 status = "okay"; 126 status = "okay";
127 }; 127 };
128 128
129 &davinci_mdio_sw { 129 &davinci_mdio_sw {
130 phy1: ethernet-phy@2 { 130 phy1: ethernet-phy@2 {
131 reg = <2>; 131 reg = <2>;
132 }; 132 };
133 }; 133 };
134 134
135 &mac_sw { 135 &mac_sw {
136 pinctrl-names = "default"; 136 pinctrl-names = "default";
137 pinctrl-0 = <ðernet0_pins ðernet 137 pinctrl-0 = <ðernet0_pins ðernet1_pins>;
138 }; 138 };
139 139
140 /* Misc */ 140 /* Misc */
141 &am33xx_pinmux { 141 &am33xx_pinmux {
142 pinctrl-names = "default"; 142 pinctrl-names = "default";
143 pinctrl-0 = <&cb_gpio_pins>; 143 pinctrl-0 = <&cb_gpio_pins>;
144 144
145 cb_gpio_pins: pinmux-cb-gpio-pins { 145 cb_gpio_pins: pinmux-cb-gpio-pins {
146 pinctrl-single,pins = < 146 pinctrl-single,pins = <
147 AM33XX_PADCONF(AM335X_ 147 AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
148 AM33XX_PADCONF(AM335X_ 148 AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
149 >; 149 >;
150 }; 150 };
151 }; 151 };
152 152
153 /* MMC */ 153 /* MMC */
154 &am33xx_pinmux { 154 &am33xx_pinmux {
155 mmc1_pins: pinmux-mmc1-pins { 155 mmc1_pins: pinmux-mmc1-pins {
156 pinctrl-single,pins = < 156 pinctrl-single,pins = <
157 AM33XX_PADCONF(AM335X_ 157 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
158 AM33XX_PADCONF(AM335X_ 158 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
159 AM33XX_PADCONF(AM335X_ 159 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
160 AM33XX_PADCONF(AM335X_ 160 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
161 AM33XX_PADCONF(AM335X_ 161 AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
162 AM33XX_PADCONF(AM335X_ 162 AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
163 AM33XX_PADCONF(AM335X_ 163 AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
164 >; 164 >;
165 }; 165 };
166 }; 166 };
167 167
168 &mmc1 { 168 &mmc1 {
169 vmmc-supply = <&vcc3v3>; 169 vmmc-supply = <&vcc3v3>;
170 bus-width = <4>; 170 bus-width = <4>;
171 pinctrl-names = "default"; 171 pinctrl-names = "default";
172 pinctrl-0 = <&mmc1_pins>; 172 pinctrl-0 = <&mmc1_pins>;
173 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 173 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
174 status = "okay"; 174 status = "okay";
175 }; 175 };
176 176
177 /* UARTs */ 177 /* UARTs */
178 &am33xx_pinmux { 178 &am33xx_pinmux {
179 uart0_pins: pinmux-uart0-pins { 179 uart0_pins: pinmux-uart0-pins {
180 pinctrl-single,pins = < 180 pinctrl-single,pins = <
181 AM33XX_PADCONF(AM335X_ 181 AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
182 AM33XX_PADCONF(AM335X_ 182 AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
183 >; 183 >;
184 }; 184 };
185 185
186 uart1_pins: pinmux-uart1-pins { 186 uart1_pins: pinmux-uart1-pins {
187 pinctrl-single,pins = < 187 pinctrl-single,pins = <
188 AM33XX_PADCONF(AM335X_ 188 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
189 AM33XX_PADCONF(AM335X_ 189 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
190 AM33XX_PADCONF(AM335X_ 190 AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
191 AM33XX_PADCONF(AM335X_ 191 AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
192 >; 192 >;
193 }; 193 };
194 194
195 uart2_pins: pinmux-uart2-pins { 195 uart2_pins: pinmux-uart2-pins {
196 pinctrl-single,pins = < 196 pinctrl-single,pins = <
197 AM33XX_PADCONF(AM335X_ 197 AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
198 AM33XX_PADCONF(AM335X_ 198 AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
199 >; 199 >;
200 }; 200 };
201 201
202 uart3_pins: pinmux-uart3-pins { 202 uart3_pins: pinmux-uart3-pins {
203 pinctrl-single,pins = < 203 pinctrl-single,pins = <
204 AM33XX_PADCONF(AM335X_ 204 AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */
205 AM33XX_PADCONF(AM335X_ 205 AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */
206 >; 206 >;
207 }; 207 };
208 }; 208 };
209 209
210 &uart0 { 210 &uart0 {
211 pinctrl-names = "default"; 211 pinctrl-names = "default";
212 pinctrl-0 = <&uart0_pins>; 212 pinctrl-0 = <&uart0_pins>;
213 status = "okay"; 213 status = "okay";
214 }; 214 };
215 215
216 &uart1 { 216 &uart1 {
217 pinctrl-names = "default"; 217 pinctrl-names = "default";
218 pinctrl-0 = <&uart1_pins>; 218 pinctrl-0 = <&uart1_pins>;
219 }; 219 };
220 220
221 &uart2 { 221 &uart2 {
222 pinctrl-names = "default"; 222 pinctrl-names = "default";
223 pinctrl-0 = <&uart2_pins>; 223 pinctrl-0 = <&uart2_pins>;
224 status = "okay"; 224 status = "okay";
225 }; 225 };
226 226
227 &uart3 { 227 &uart3 {
228 pinctrl-names = "default"; 228 pinctrl-names = "default";
229 pinctrl-0 = <&uart3_pins>; 229 pinctrl-0 = <&uart3_pins>;
230 status = "okay"; 230 status = "okay";
231 }; 231 };
232 232
233 /* USB */ 233 /* USB */
234 &usb1 { 234 &usb1 {
235 dr_mode = "host"; 235 dr_mode = "host";
236 }; 236 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.