1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 /* 2 /*
3 * Copyright (C) 2012 Texas Instruments Incorp 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 4 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
5 */ 5 */
6 /dts-v1/; 6 /dts-v1/;
7 7
8 #include "omap34xx.dtsi" 8 #include "omap34xx.dtsi"
9 9
10 /* Secure omaps have some devices inaccessible 10 /* Secure omaps have some devices inaccessible depending on the firmware */
11 &aes1_target { 11 &aes1_target {
12 status = "disabled"; 12 status = "disabled";
13 }; 13 };
14 14
15 &aes2_target { 15 &aes2_target {
16 status = "disabled"; 16 status = "disabled";
17 }; 17 };
18 18
19 &sham { 19 &sham {
20 status = "disabled"; 20 status = "disabled";
21 }; 21 };
22 22
23 / { 23 / {
24 cpus { 24 cpus {
25 cpu@0 { 25 cpu@0 {
26 cpu0-supply = <&vcc>; 26 cpu0-supply = <&vcc>;
27 }; 27 };
28 }; 28 };
29 29
30 memory@80000000 { 30 memory@80000000 {
31 device_type = "memory"; 31 device_type = "memory";
32 reg = <0x80000000 0x10000000>; 32 reg = <0x80000000 0x10000000>; /* 256 MB */
33 }; 33 };
34 34
35 /* HS USB Port 2 Power */ 35 /* HS USB Port 2 Power */
36 hsusb2_power: hsusb2_power_reg { 36 hsusb2_power: hsusb2_power_reg {
37 compatible = "regulator-fixed" 37 compatible = "regulator-fixed";
38 regulator-name = "hsusb2_vbus" 38 regulator-name = "hsusb2_vbus";
39 regulator-min-microvolt = <330 39 regulator-min-microvolt = <3300000>;
40 regulator-max-microvolt = <330 40 regulator-max-microvolt = <3300000>;
41 gpio = <&twl_gpio 18 GPIO_ACTI 41 gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
42 startup-delay-us = <70000>; 42 startup-delay-us = <70000>;
43 }; 43 };
44 44
45 /* HS USB Host PHY on PORT 2 */ 45 /* HS USB Host PHY on PORT 2 */
46 hsusb2_phy: hsusb2-phy-pins { 46 hsusb2_phy: hsusb2-phy-pins {
47 compatible = "usb-nop-xceiv"; 47 compatible = "usb-nop-xceiv";
48 reset-gpios = <&gpio6 2 GPIO_A 48 reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
49 vcc-supply = <&hsusb2_power>; 49 vcc-supply = <&hsusb2_power>;
50 #phy-cells = <0>; 50 #phy-cells = <0>;
51 }; 51 };
52 52
53 sound { 53 sound {
54 compatible = "ti,omap-twl4030" 54 compatible = "ti,omap-twl4030";
55 ti,model = "omap3beagle"; 55 ti,model = "omap3beagle";
56 56
57 /* McBSP2 is used for onboard 57 /* McBSP2 is used for onboard sound, same as on beagle */
58 ti,mcbsp = <&mcbsp2>; 58 ti,mcbsp = <&mcbsp2>;
59 }; 59 };
60 60
61 /* Regulator to enable/switch the vcc 61 /* Regulator to enable/switch the vcc of the Wifi module */
62 mmc2_sdio_poweron: regulator-mmc2-sdio 62 mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
63 compatible = "regulator-fixed" 63 compatible = "regulator-fixed";
64 regulator-name = "regulator-mm 64 regulator-name = "regulator-mmc2-sdio-poweron";
65 regulator-min-microvolt = <315 65 regulator-min-microvolt = <3150000>;
66 regulator-max-microvolt = <315 66 regulator-max-microvolt = <3150000>;
67 gpio = <&gpio5 29 GPIO_ACTIVE_ 67 gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
68 startup-delay-us = <10000>; 68 startup-delay-us = <10000>;
69 }; 69 };
70 }; 70 };
71 71
72 &omap3_pmx_core { 72 &omap3_pmx_core {
73 hsusbb2_pins: hsusbb2-pins { 73 hsusbb2_pins: hsusbb2-pins {
74 pinctrl-single,pins = < 74 pinctrl-single,pins = <
75 OMAP3_CORE1_IOPAD(0x25 75 OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
76 OMAP3_CORE1_IOPAD(0x25 76 OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
77 OMAP3_CORE1_IOPAD(0x25 77 OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
78 OMAP3_CORE1_IOPAD(0x25 78 OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
79 OMAP3_CORE1_IOPAD(0x25 79 OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
80 OMAP3_CORE1_IOPAD(0x25 80 OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
81 OMAP3_CORE1_IOPAD(0x21 81 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
82 OMAP3_CORE1_IOPAD(0x21 82 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
83 OMAP3_CORE1_IOPAD(0x21 83 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
84 OMAP3_CORE1_IOPAD(0x21 84 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
85 OMAP3_CORE1_IOPAD(0x21 85 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
86 OMAP3_CORE1_IOPAD(0x21 86 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
87 >; 87 >;
88 }; 88 };
89 89
90 mmc1_pins: mmc1-pins { 90 mmc1_pins: mmc1-pins {
91 pinctrl-single,pins = < 91 pinctrl-single,pins = <
92 OMAP3_CORE1_IOPAD(0x21 92 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
93 OMAP3_CORE1_IOPAD(0x21 93 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
94 OMAP3_CORE1_IOPAD(0x21 94 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
95 OMAP3_CORE1_IOPAD(0x21 95 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
96 OMAP3_CORE1_IOPAD(0x21 96 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
97 OMAP3_CORE1_IOPAD(0x21 97 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
98 OMAP3_CORE1_IOPAD(0x21 98 OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
99 OMAP3_CORE1_IOPAD(0x21 99 OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
100 OMAP3_CORE1_IOPAD(0x21 100 OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
101 OMAP3_CORE1_IOPAD(0x21 101 OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
102 >; 102 >;
103 }; 103 };
104 104
105 mmc2_pins: mmc2-pins { 105 mmc2_pins: mmc2-pins {
106 pinctrl-single,pins = < 106 pinctrl-single,pins = <
107 OMAP3_CORE1_IOPAD(0x21 107 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
108 OMAP3_CORE1_IOPAD(0x21 108 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
109 OMAP3_CORE1_IOPAD(0x21 109 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
110 OMAP3_CORE1_IOPAD(0x21 110 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
111 OMAP3_CORE1_IOPAD(0x21 111 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
112 OMAP3_CORE1_IOPAD(0x21 112 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
113 >; 113 >;
114 }; 114 };
115 115
116 /* wlan GPIO output for WLAN_EN */ 116 /* wlan GPIO output for WLAN_EN */
117 wlan_gpio: wlan-gpio-pins { 117 wlan_gpio: wlan-gpio-pins {
118 pinctrl-single,pins = < 118 pinctrl-single,pins = <
119 OMAP3_CORE1_IOPAD(0x21 119 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */
120 >; 120 >;
121 }; 121 };
122 122
123 uart3_pins: uart3-pins { 123 uart3_pins: uart3-pins {
124 pinctrl-single,pins = < 124 pinctrl-single,pins = <
125 OMAP3_CORE1_IOPAD(0x21 125 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
126 OMAP3_CORE1_IOPAD(0x21 126 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
127 >; 127 >;
128 }; 128 };
129 129
130 i2c3_pins: i2c3-pins { 130 i2c3_pins: i2c3-pins {
131 pinctrl-single,pins = < 131 pinctrl-single,pins = <
132 OMAP3_CORE1_IOPAD(0x21 132 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */
133 OMAP3_CORE1_IOPAD(0x21 133 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */
134 >; 134 >;
135 }; 135 };
136 136
137 mcspi1_pins: mcspi1-pins { 137 mcspi1_pins: mcspi1-pins {
138 pinctrl-single,pins = < 138 pinctrl-single,pins = <
139 OMAP3_CORE1_IOPAD(0x21 139 OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
140 OMAP3_CORE1_IOPAD(0x21 140 OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
141 OMAP3_CORE1_IOPAD(0x21 141 OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
142 OMAP3_CORE1_IOPAD(0x21 142 OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
143 >; 143 >;
144 }; 144 };
145 145
146 mcspi3_pins: mcspi3-pins { 146 mcspi3_pins: mcspi3-pins {
147 pinctrl-single,pins = < 147 pinctrl-single,pins = <
148 OMAP3_CORE1_IOPAD(0x25 148 OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
149 OMAP3_CORE1_IOPAD(0x25 149 OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
150 OMAP3_CORE1_IOPAD(0x25 150 OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
151 OMAP3_CORE1_IOPAD(0x25 151 OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
152 >; 152 >;
153 }; 153 };
154 154
155 mcbsp3_pins: mcbsp3-pins { 155 mcbsp3_pins: mcbsp3-pins {
156 pinctrl-single,pins = < 156 pinctrl-single,pins = <
157 OMAP3_CORE1_IOPAD(0x21 157 OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */
158 OMAP3_CORE1_IOPAD(0x21 158 OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */
159 OMAP3_CORE1_IOPAD(0x21 159 OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */
160 OMAP3_CORE1_IOPAD(0x21 160 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */
161 >; 161 >;
162 }; 162 };
163 }; 163 };
164 164
165 /* McBSP1: mux'ed with GPIO158 as clock for HA 165 /* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
166 &mcbsp1 { 166 &mcbsp1 {
167 status = "disabled"; 167 status = "disabled";
168 }; 168 };
169 169
170 &mcbsp2 { 170 &mcbsp2 {
171 status = "okay"; 171 status = "okay";
172 }; 172 };
173 173
174 &i2c1 { 174 &i2c1 {
175 clock-frequency = <2600000>; 175 clock-frequency = <2600000>;
176 176
177 twl: twl@48 { 177 twl: twl@48 {
178 reg = <0x48>; 178 reg = <0x48>;
179 interrupts = <7>; /* SYS_NIRQ 179 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
180 interrupt-parent = <&intc>; 180 interrupt-parent = <&intc>;
181 181
182 twl_audio: audio { 182 twl_audio: audio {
183 compatible = "ti,twl40 183 compatible = "ti,twl4030-audio";
184 codec { 184 codec {
185 }; 185 };
186 }; 186 };
187 }; 187 };
188 }; 188 };
189 189
190 &i2c3 { 190 &i2c3 {
191 clock-frequency = <100000>; 191 clock-frequency = <100000>;
192 192
193 pinctrl-names = "default"; 193 pinctrl-names = "default";
194 pinctrl-0 = <&i2c3_pins>; 194 pinctrl-0 = <&i2c3_pins>;
195 }; 195 };
196 196
197 &mcspi1 { 197 &mcspi1 {
198 pinctrl-names = "default"; 198 pinctrl-names = "default";
199 pinctrl-0 = <&mcspi1_pins>; 199 pinctrl-0 = <&mcspi1_pins>;
200 }; 200 };
201 201
202 &mcspi3 { 202 &mcspi3 {
203 pinctrl-names = "default"; 203 pinctrl-names = "default";
204 pinctrl-0 = <&mcspi3_pins>; 204 pinctrl-0 = <&mcspi3_pins>;
205 }; 205 };
206 206
207 #include "twl4030.dtsi" 207 #include "twl4030.dtsi"
208 #include "twl4030_omap3.dtsi" 208 #include "twl4030_omap3.dtsi"
209 209
210 &mmc1 { 210 &mmc1 {
211 pinctrl-names = "default"; 211 pinctrl-names = "default";
212 pinctrl-0 = <&mmc1_pins>; 212 pinctrl-0 = <&mmc1_pins>;
213 vmmc-supply = <&vmmc1>; 213 vmmc-supply = <&vmmc1>;
214 vqmmc-supply = <&vsim>; 214 vqmmc-supply = <&vsim>;
215 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LO 215 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
216 bus-width = <8>; 216 bus-width = <8>;
217 }; 217 };
218 218
219 // WiFi (Marvell 88W8686) on MMC2/SDIO 219 // WiFi (Marvell 88W8686) on MMC2/SDIO
220 &mmc2 { 220 &mmc2 {
221 pinctrl-names = "default"; 221 pinctrl-names = "default";
222 pinctrl-0 = <&mmc2_pins>; 222 pinctrl-0 = <&mmc2_pins>;
223 vmmc-supply = <&mmc2_sdio_poweron>; 223 vmmc-supply = <&mmc2_sdio_poweron>;
224 non-removable; 224 non-removable;
225 bus-width = <4>; 225 bus-width = <4>;
226 cap-power-off-card; 226 cap-power-off-card;
227 }; 227 };
228 228
229 &mmc3 { 229 &mmc3 {
230 status = "disabled"; 230 status = "disabled";
231 }; 231 };
232 232
233 &usbhshost { 233 &usbhshost {
234 port2-mode = "ehci-phy"; 234 port2-mode = "ehci-phy";
235 }; 235 };
236 236
237 &usbhsehci { 237 &usbhsehci {
238 phys = <0 &hsusb2_phy>; 238 phys = <0 &hsusb2_phy>;
239 }; 239 };
240 240
241 &twl_gpio { 241 &twl_gpio {
242 ti,use-leds; 242 ti,use-leds;
243 /* pullups: BIT(1) */ 243 /* pullups: BIT(1) */
244 ti,pullups = <0x000002>; 244 ti,pullups = <0x000002>;
245 /* 245 /*
246 * pulldowns: 246 * pulldowns:
247 * BIT(2), BIT(6), BIT(7), BIT(8), BIT 247 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
248 * BIT(15), BIT(16), BIT(17) 248 * BIT(15), BIT(16), BIT(17)
249 */ 249 */
250 ti,pulldowns = <0x03a1c4>; 250 ti,pulldowns = <0x03a1c4>;
251 }; 251 };
252 252
253 &uart3 { 253 &uart3 {
254 pinctrl-names = "default"; 254 pinctrl-names = "default";
255 pinctrl-0 = <&uart3_pins>; 255 pinctrl-0 = <&uart3_pins>;
256 }; 256 };
257 257
258 &mcbsp3 { 258 &mcbsp3 {
259 status = "okay"; 259 status = "okay";
260 pinctrl-names = "default"; 260 pinctrl-names = "default";
261 pinctrl-0 = <&mcbsp3_pins>; 261 pinctrl-0 = <&mcbsp3_pins>;
262 }; 262 };
263 263
264 &gpmc { 264 &gpmc {
265 ranges = <0 0 0x30000000 0x01000000>; 265 ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
266 266
267 nand@0,0 { 267 nand@0,0 {
268 compatible = "ti,omap2-nand"; 268 compatible = "ti,omap2-nand";
269 reg = <0 0 4>; /* CS0, offset 269 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
270 interrupt-parent = <&gpmc>; 270 interrupt-parent = <&gpmc>;
271 interrupts = <0 IRQ_TYPE_NONE> 271 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
272 <1 IRQ_TYPE_NONE> 272 <1 IRQ_TYPE_NONE>; /* termcount */
273 nand-bus-width = <16>; 273 nand-bus-width = <16>;
274 gpmc,device-width = <2>; 274 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
275 ti,nand-ecc-opt = "sw"; 275 ti,nand-ecc-opt = "sw";
276 276
277 gpmc,cs-on-ns = <0>; 277 gpmc,cs-on-ns = <0>;
278 gpmc,cs-rd-off-ns = <36>; 278 gpmc,cs-rd-off-ns = <36>;
279 gpmc,cs-wr-off-ns = <36>; 279 gpmc,cs-wr-off-ns = <36>;
280 gpmc,adv-on-ns = <6>; 280 gpmc,adv-on-ns = <6>;
281 gpmc,adv-rd-off-ns = <24>; 281 gpmc,adv-rd-off-ns = <24>;
282 gpmc,adv-wr-off-ns = <36>; 282 gpmc,adv-wr-off-ns = <36>;
283 gpmc,oe-on-ns = <6>; 283 gpmc,oe-on-ns = <6>;
284 gpmc,oe-off-ns = <48>; 284 gpmc,oe-off-ns = <48>;
285 gpmc,we-on-ns = <6>; 285 gpmc,we-on-ns = <6>;
286 gpmc,we-off-ns = <30>; 286 gpmc,we-off-ns = <30>;
287 gpmc,rd-cycle-ns = <72>; 287 gpmc,rd-cycle-ns = <72>;
288 gpmc,wr-cycle-ns = <72>; 288 gpmc,wr-cycle-ns = <72>;
289 gpmc,access-ns = <54>; 289 gpmc,access-ns = <54>;
290 gpmc,wr-access-ns = <30>; 290 gpmc,wr-access-ns = <30>;
291 291
292 #address-cells = <1>; 292 #address-cells = <1>;
293 #size-cells = <1>; 293 #size-cells = <1>;
294 294
295 x-loader@0 { 295 x-loader@0 {
296 label = "X-Loader"; 296 label = "X-Loader";
297 reg = <0 0x80000>; 297 reg = <0 0x80000>;
298 }; 298 };
299 299
300 bootloaders@80000 { 300 bootloaders@80000 {
301 label = "U-Boot"; 301 label = "U-Boot";
302 reg = <0x80000 0x1e000 302 reg = <0x80000 0x1e0000>;
303 }; 303 };
304 304
305 bootloaders_env@260000 { 305 bootloaders_env@260000 {
306 label = "U-Boot Env"; 306 label = "U-Boot Env";
307 reg = <0x260000 0x2000 307 reg = <0x260000 0x20000>;
308 }; 308 };
309 309
310 kernel@280000 { 310 kernel@280000 {
311 label = "Kernel"; 311 label = "Kernel";
312 reg = <0x280000 0x4000 312 reg = <0x280000 0x400000>;
313 }; 313 };
314 314
315 filesystem@680000 { 315 filesystem@680000 {
316 label = "File System"; 316 label = "File System";
317 reg = <0x680000 0xf980 317 reg = <0x680000 0xf980000>;
318 }; 318 };
319 }; 319 };
320 }; 320 };
321 321
322 &usb_otg_hs { 322 &usb_otg_hs {
323 interface-type = <0>; 323 interface-type = <0>;
324 usb-phy = <&usb2_phy>; 324 usb-phy = <&usb2_phy>;
325 phys = <&usb2_phy>; 325 phys = <&usb2_phy>;
326 phy-names = "usb2-phy"; 326 phy-names = "usb2-phy";
327 mode = <3>; 327 mode = <3>;
328 power = <50>; 328 power = <50>;
329 }; 329 };
330 330
331 &vaux2 { 331 &vaux2 {
332 regulator-name = "vdd_ehci"; 332 regulator-name = "vdd_ehci";
333 regulator-min-microvolt = <1800000>; 333 regulator-min-microvolt = <1800000>;
334 regulator-max-microvolt = <1800000>; 334 regulator-max-microvolt = <1800000>;
335 regulator-always-on; 335 regulator-always-on;
336 }; 336 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.