1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2017 Icenowy Zheng <icenowy@ao 2 // Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
3 // Based on sun50i-h5-orangepi-pc2.dts, which 3 // Based on sun50i-h5-orangepi-pc2.dts, which is:
4 // Copyright (C) 2016 ARM Ltd. 4 // Copyright (C) 2016 ARM Ltd.
5 5
6 /dts-v1/; 6 /dts-v1/;
7 #include "sun50i-h5.dtsi" 7 #include "sun50i-h5.dtsi"
8 8
9 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/input/input.h>
11 11
12 / { 12 / {
13 model = "Xunlong Orange Pi Prime"; 13 model = "Xunlong Orange Pi Prime";
14 compatible = "xunlong,orangepi-prime", 14 compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
15 15
16 aliases { 16 aliases {
17 ethernet0 = &emac; 17 ethernet0 = &emac;
18 serial0 = &uart0; 18 serial0 = &uart0;
19 }; 19 };
20 20
21 chosen { 21 chosen {
22 stdout-path = "serial0:115200n 22 stdout-path = "serial0:115200n8";
23 }; 23 };
24 24
25 connector { 25 connector {
26 compatible = "hdmi-connector"; 26 compatible = "hdmi-connector";
27 type = "a"; 27 type = "a";
28 28
29 port { 29 port {
30 hdmi_con_in: endpoint 30 hdmi_con_in: endpoint {
31 remote-endpoin 31 remote-endpoint = <&hdmi_out_con>;
32 }; 32 };
33 }; 33 };
34 }; 34 };
35 35
36 leds { 36 leds {
37 compatible = "gpio-leds"; 37 compatible = "gpio-leds";
38 38
39 led-0 { 39 led-0 {
40 label = "orangepi:gree 40 label = "orangepi:green:pwr";
41 gpios = <&r_pio 0 10 G 41 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
42 default-state = "on"; 42 default-state = "on";
43 }; 43 };
44 44
45 led-1 { 45 led-1 {
46 label = "orangepi:red: 46 label = "orangepi:red:status";
47 gpios = <&pio 0 20 GPI 47 gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
48 }; 48 };
49 }; 49 };
50 50
51 gpio-keys { 51 gpio-keys {
52 compatible = "gpio-keys"; 52 compatible = "gpio-keys";
53 53
54 key-sw4 { 54 key-sw4 {
55 label = "sw4"; 55 label = "sw4";
56 linux,code = <BTN_0>; 56 linux,code = <BTN_0>;
57 gpios = <&r_pio 0 3 GP 57 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
58 }; 58 };
59 }; 59 };
60 60
61 reg_gmac_3v3: gmac-3v3 { 61 reg_gmac_3v3: gmac-3v3 {
62 compatible = "regulator-fixed" 62 compatible = "regulator-fixed";
63 regulator-name = "gmac-3v3"; 63 regulator-name = "gmac-3v3";
64 regulator-min-microvolt = <330 64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <330 65 regulator-max-microvolt = <3300000>;
66 startup-delay-us = <100000>; 66 startup-delay-us = <100000>;
67 enable-active-high; 67 enable-active-high;
68 gpio = <&pio 3 6 GPIO_ACTIVE_H 68 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
69 }; 69 };
70 70
71 reg_vcc3v3: vcc3v3 { 71 reg_vcc3v3: vcc3v3 {
72 compatible = "regulator-fixed" 72 compatible = "regulator-fixed";
73 regulator-name = "vcc3v3"; 73 regulator-name = "vcc3v3";
74 regulator-min-microvolt = <330 74 regulator-min-microvolt = <3300000>;
75 regulator-max-microvolt = <330 75 regulator-max-microvolt = <3300000>;
76 }; 76 };
77 77
78 reg_usb0_vbus: usb0-vbus { 78 reg_usb0_vbus: usb0-vbus {
79 compatible = "regulator-fixed" 79 compatible = "regulator-fixed";
80 regulator-name = "usb0-vbus"; 80 regulator-name = "usb0-vbus";
81 regulator-min-microvolt = <500 81 regulator-min-microvolt = <5000000>;
82 regulator-max-microvolt = <500 82 regulator-max-microvolt = <5000000>;
83 enable-active-high; 83 enable-active-high;
84 gpio = <&r_pio 0 2 GPIO_ACTIVE 84 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
85 status = "okay"; 85 status = "okay";
86 }; 86 };
87 87
88 wifi_pwrseq: pwrseq { 88 wifi_pwrseq: pwrseq {
89 compatible = "mmc-pwrseq-simpl 89 compatible = "mmc-pwrseq-simple";
90 reset-gpios = <&pio 2 14 GPIO_ 90 reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
91 }; 91 };
92 }; 92 };
93 93
94 &codec { 94 &codec {
95 allwinner,audio-routing = 95 allwinner,audio-routing =
96 "Line Out", "LINEOUT", 96 "Line Out", "LINEOUT",
97 "MIC1", "Mic", 97 "MIC1", "Mic",
98 "Mic", "MBIAS"; 98 "Mic", "MBIAS";
99 status = "okay"; 99 status = "okay";
100 }; 100 };
101 101
102 &de { 102 &de {
103 status = "okay"; 103 status = "okay";
104 }; 104 };
105 105
106 &ehci0 { 106 &ehci0 {
107 status = "okay"; 107 status = "okay";
108 }; 108 };
109 109
110 &ehci1 { 110 &ehci1 {
111 status = "okay"; 111 status = "okay";
112 }; 112 };
113 113
114 &ehci2 { 114 &ehci2 {
115 status = "okay"; 115 status = "okay";
116 }; 116 };
117 117
118 &ehci3 { 118 &ehci3 {
119 status = "okay"; 119 status = "okay";
120 }; 120 };
121 121
122 &emac { 122 &emac {
123 pinctrl-names = "default"; 123 pinctrl-names = "default";
124 pinctrl-0 = <&emac_rgmii_pins>; 124 pinctrl-0 = <&emac_rgmii_pins>;
125 phy-supply = <®_gmac_3v3>; 125 phy-supply = <®_gmac_3v3>;
126 phy-handle = <&ext_rgmii_phy>; 126 phy-handle = <&ext_rgmii_phy>;
127 phy-mode = "rgmii-id"; 127 phy-mode = "rgmii-id";
128 status = "okay"; 128 status = "okay";
129 }; 129 };
130 130
131 &external_mdio { 131 &external_mdio {
132 ext_rgmii_phy: ethernet-phy@1 { 132 ext_rgmii_phy: ethernet-phy@1 {
133 compatible = "ethernet-phy-iee 133 compatible = "ethernet-phy-ieee802.3-c22";
134 reg = <1>; 134 reg = <1>;
135 }; 135 };
136 }; 136 };
137 137
138 &hdmi { 138 &hdmi {
139 status = "okay"; 139 status = "okay";
140 }; 140 };
141 141
142 &hdmi_out { 142 &hdmi_out {
143 hdmi_out_con: endpoint { 143 hdmi_out_con: endpoint {
144 remote-endpoint = <&hdmi_con_i 144 remote-endpoint = <&hdmi_con_in>;
145 }; 145 };
146 }; 146 };
147 147
148 &ir { 148 &ir {
149 pinctrl-names = "default"; 149 pinctrl-names = "default";
150 pinctrl-0 = <&r_ir_rx_pin>; 150 pinctrl-0 = <&r_ir_rx_pin>;
151 status = "okay"; 151 status = "okay";
152 }; 152 };
153 153
154 &mmc0 { 154 &mmc0 {
155 vmmc-supply = <®_vcc3v3>; 155 vmmc-supply = <®_vcc3v3>;
156 bus-width = <4>; 156 bus-width = <4>;
157 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; 157 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
158 status = "okay"; 158 status = "okay";
159 }; 159 };
160 160
161 &mmc1 { 161 &mmc1 {
162 vmmc-supply = <®_vcc3v3>; 162 vmmc-supply = <®_vcc3v3>;
163 mmc-pwrseq = <&wifi_pwrseq>; 163 mmc-pwrseq = <&wifi_pwrseq>;
164 bus-width = <4>; 164 bus-width = <4>;
165 non-removable; 165 non-removable;
166 status = "okay"; 166 status = "okay";
167 }; 167 };
168 168
169 &ohci0 { 169 &ohci0 {
170 status = "okay"; 170 status = "okay";
171 }; 171 };
172 172
173 &ohci1 { 173 &ohci1 {
174 status = "okay"; 174 status = "okay";
175 }; 175 };
176 176
177 &ohci2 { 177 &ohci2 {
178 status = "okay"; 178 status = "okay";
179 }; 179 };
180 180
181 &ohci3 { 181 &ohci3 {
182 status = "okay"; 182 status = "okay";
183 }; 183 };
184 184
185 &uart0 { 185 &uart0 {
186 pinctrl-names = "default"; 186 pinctrl-names = "default";
187 pinctrl-0 = <&uart0_pa_pins>; 187 pinctrl-0 = <&uart0_pa_pins>;
188 status = "okay"; 188 status = "okay";
189 }; 189 };
190 190
191 &uart1 { 191 &uart1 {
192 pinctrl-names = "default"; 192 pinctrl-names = "default";
193 pinctrl-0 = <&uart1_pins>; 193 pinctrl-0 = <&uart1_pins>;
194 status = "disabled"; 194 status = "disabled";
195 }; 195 };
196 196
197 &uart2 { 197 &uart2 {
198 pinctrl-names = "default"; 198 pinctrl-names = "default";
199 pinctrl-0 = <&uart2_pins>; 199 pinctrl-0 = <&uart2_pins>;
200 status = "disabled"; 200 status = "disabled";
201 }; 201 };
202 202
203 &usb_otg { 203 &usb_otg {
204 dr_mode = "otg"; 204 dr_mode = "otg";
205 status = "okay"; 205 status = "okay";
206 }; 206 };
207 207
208 &usbphy { 208 &usbphy {
209 /* USB Type-A ports' VBUS is always on 209 /* USB Type-A ports' VBUS is always on */
210 usb0_id_det-gpios = <&pio 0 21 GPIO_AC 210 usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
211 usb0_vbus-supply = <®_usb0_vbus>; 211 usb0_vbus-supply = <®_usb0_vbus>;
212 status = "okay"; 212 status = "okay";
213 }; 213 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.