1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (c) 2023 ARM Ltd.
3
4 /dts-v1/;
5
6 #include "sun50i-a64.dtsi"
7 #include "sun50i-a64-cpu-opp.dtsi"
8
9 #include <dt-bindings/gpio/gpio.h>
10
11 / {
12 model = "Remix Mini PC";
13 compatible = "jide,remix-mini-pc", "al
14 "allwinner,sun50i-a64";
15
16 aliases {
17 ethernet1 = &rtl8723bs;
18 serial0 = &uart0;
19 };
20
21 chosen {
22 stdout-path = "serial0:115200n
23 };
24
25 hdmi-connector {
26 compatible = "hdmi-connector";
27 type = "a";
28
29 port {
30 hdmi_con_in: endpoint
31 remote-endpoin
32 };
33 };
34 };
35
36 reg_vcc5v: regulator-5v {
37 /* board wide 5V supply direct
38 compatible = "regulator-fixed"
39 regulator-name = "vcc-5v";
40 regulator-min-microvolt = <500
41 regulator-max-microvolt = <500
42 regulator-always-on;
43 };
44
45 wifi_pwrseq: pwrseq {
46 compatible = "mmc-pwrseq-simpl
47 reset-gpios = <&r_pio 0 2 GPIO
48 post-power-on-delay-ms = <200>
49 };
50 };
51
52 &codec {
53 status = "okay";
54 };
55
56 &codec_analog {
57 cpvdd-supply = <®_eldo1>;
58 status = "okay";
59 };
60
61 &cpu0 {
62 cpu-supply = <®_dcdc2>;
63 };
64
65 &cpu1 {
66 cpu-supply = <®_dcdc2>;
67 };
68
69 &cpu2 {
70 cpu-supply = <®_dcdc2>;
71 };
72
73 &cpu3 {
74 cpu-supply = <®_dcdc2>;
75 };
76
77 &dai {
78 status = "okay";
79 };
80
81 &de {
82 status = "okay";
83 };
84
85 &ehci0 {
86 status = "okay";
87 };
88
89 &ehci1 {
90 status = "okay";
91 };
92
93 &hdmi {
94 hvcc-supply = <®_dldo1>;
95 status = "okay";
96 };
97
98 &hdmi_out {
99 hdmi_out_con: endpoint {
100 remote-endpoint = <&hdmi_con_i
101 };
102 };
103
104 /* Connects to the AC200 chip */
105 &i2c0 {
106 pinctrl-names = "default";
107 pinctrl-0 = <&i2c0_pins>;
108 status = "okay";
109 };
110
111 &i2c0_pins {
112 bias-pull-up;
113 };
114
115 &mmc0 {
116 pinctrl-names = "default";
117 pinctrl-0 = <&mmc0_pins>;
118 vmmc-supply = <®_dcdc1>;
119 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
120 disable-wp;
121 bus-width = <4>;
122 status = "okay";
123 };
124
125 &mmc1 {
126 pinctrl-names = "default";
127 pinctrl-0 = <&mmc1_pins>;
128 vmmc-supply = <®_aldo1>;
129 vqmmc-supply = <®_dldo4>;
130 mmc-pwrseq = <&wifi_pwrseq>;
131 bus-width = <4>;
132 non-removable;
133 status = "okay";
134
135 rtl8723bs: wifi@1 {
136 reg = <1>;
137 interrupt-parent = <&r_pio>;
138 interrupts = <0 3 IRQ_TYPE_LEV
139 interrupt-names = "host-wake";
140 };
141 };
142
143 &mmc2 {
144 pinctrl-names = "default";
145 pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pi
146 vmmc-supply = <®_dcdc1>;
147 vqmmc-supply = <®_eldo1>;
148 bus-width = <8>;
149 non-removable;
150 mmc-hs200-1_8v;
151 mmc-hs400-1_8v;
152 cap-mmc-hw-reset;
153 status = "okay";
154 };
155
156 &ohci0 {
157 status = "okay";
158 };
159
160 &ohci1 {
161 status = "okay";
162 };
163
164 &pio {
165 vcc-pb-supply = <®_dcdc1>;
166 vcc-pc-supply = <®_dcdc1>;
167 vcc-pd-supply = <®_dcdc1>;
168 vcc-pe-supply = <®_dcdc1>;
169 vcc-pf-supply = <®_dcdc1>;
170 vcc-pg-supply = <®_dldo4>;
171 vcc-ph-supply = <®_dcdc1>;
172 };
173
174 &r_ir {
175 status = "okay";
176 };
177
178 &r_pio {
179 /*
180 * We cannot add that supply for now s
181 * dependency between pinctrl, the reg
182 *
183 * vcc-pl-supply = <®_aldo2>;
184 */
185 };
186
187 &r_rsb {
188 status = "okay";
189
190 axp803: pmic@3a3 {
191 compatible = "x-powers,axp803"
192 reg = <0x3a3>;
193 interrupt-parent = <&r_intc>;
194 interrupts = <GIC_SPI 32 IRQ_T
195 x-powers,drive-vbus-en;
196
197 vin1-supply = <®_vcc5v>;
198 vin2-supply = <®_vcc5v>;
199 vin3-supply = <®_vcc5v>;
200 vin5-supply = <®_vcc5v>;
201 vin6-supply = <®_vcc5v>;
202 aldoin-supply = <®_vcc5v>;
203 dldoin-supply = <®_vcc5v>;
204 eldoin-supply = <®_vcc5v>;
205 fldoin-supply = <®_vcc5v>;
206 drivevbus-supply = <®_vcc5v
207 ips-supply = <®_vcc5v>;
208
209 status = "okay";
210 };
211 };
212
213 #include "axp803.dtsi"
214
215 &ac_power_supply {
216 status = "okay";
217 };
218
219 ®_dcdc1 {
220 regulator-always-on;
221 regulator-min-microvolt = <3300000>;
222 regulator-max-microvolt = <3300000>;
223 regulator-name = "vcc-3v3";
224 };
225
226 ®_dcdc2 {
227 regulator-always-on;
228 regulator-min-microvolt = <1040000>;
229 regulator-max-microvolt = <1300000>;
230 regulator-name = "vdd-cpux";
231 };
232
233 /* DCDC3 is polyphased with DCDC2 */
234
235 ®_dcdc5 {
236 regulator-always-on;
237 regulator-min-microvolt = <1500000>;
238 regulator-max-microvolt = <1500000>;
239 regulator-name = "vcc-dram";
240 };
241
242 /* Deviates from the reset default of 1.1V. */
243 ®_dcdc6 {
244 regulator-always-on;
245 regulator-min-microvolt = <1200000>;
246 regulator-max-microvolt = <1200000>;
247 regulator-name = "vdd-sys";
248 };
249
250 ®_aldo1 {
251 regulator-min-microvolt = <3300000>;
252 regulator-max-microvolt = <3300000>;
253 regulator-name = "vcc-wifi";
254 };
255
256 ®_aldo2 {
257 /* Specifying R_PIO consumer would cre
258 regulator-always-on;
259 regulator-min-microvolt = <3300000>;
260 regulator-max-microvolt = <3300000>;
261 regulator-name = "vcc-pl";
262 };
263
264 ®_aldo3 {
265 regulator-always-on;
266 regulator-min-microvolt = <3000000>;
267 regulator-max-microvolt = <3000000>;
268 regulator-name = "vcc-pll-avcc";
269 };
270
271 /* AC200 power supply */
272 ®_dldo1 {
273 regulator-always-on;
274 regulator-min-microvolt = <3300000>;
275 regulator-max-microvolt = <3300000>;
276 regulator-name = "vcc-ave-33";
277 };
278
279 ®_dldo4 {
280 regulator-min-microvolt = <3300000>;
281 regulator-max-microvolt = <3300000>;
282 regulator-name = "vcc-wifi-io";
283 };
284
285 ®_drivevbus {
286 regulator-name = "usb0-vbus";
287 status = "okay";
288 };
289
290 ®_eldo1 {
291 regulator-always-on;
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-name = "vcc-cpvdd-dram-emmc"
295 };
296
297 /* Supplies the arisc management core, needed
298 ®_fldo2 {
299 regulator-always-on;
300 regulator-min-microvolt = <1100000>;
301 regulator-max-microvolt = <1100000>;
302 regulator-name = "vdd-cpus";
303 };
304
305 ®_rtc_ldo {
306 regulator-name = "vcc-rtc";
307 };
308
309 &simplefb_hdmi {
310 vcc-hdmi-supply = <®_dcdc1>;
311 };
312
313 &sound {
314 simple-audio-card,aux-devs = <&codec_a
315 simple-audio-card,widgets = "Microphon
316 "Headphone
317 simple-audio-card,routing =
318 "Left DAC", "DACL",
319 "Right DAC", "DACR",
320 "Headphone Jack", "HP"
321 "ADCL", "Left ADC",
322 "ADCR", "Right ADC",
323 "MIC2", "Microphone Ja
324 status = "okay";
325 };
326
327 /* On the (unpopulated) UART pads. */
328 &uart0 {
329 pinctrl-names = "default";
330 pinctrl-0 = <&uart0_pb_pins>;
331 status = "okay";
332 };
333
334 &uart1 {
335 pinctrl-names = "default";
336 pinctrl-0 = <&uart1_pins>, <&uart1_rts
337 uart-has-rtscts;
338 status = "okay";
339
340 bluetooth {
341 compatible = "realtek,rtl8723b
342 enable-gpios = <&r_pio 0 4 GPI
343 max-speed = <1500000>;
344 };
345 };
346
347 &usb_otg {
348 dr_mode = "host";
349 status = "okay";
350 };
351
352 &usbphy {
353 usb0_vbus-supply = <®_drivevbus>;
354 usb1_vbus-supply = <®_drivevbus>;
355 status = "okay";
356 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.