1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2019 BayLibre, SAS
4 * Author: Neil Armstrong <narmstrong@baylibre.
5 */
6
7 #include "meson-g12b-odroid.dtsi"
8
9 / {
10 aliases {
11 rtc0 = &rtc;
12 };
13
14 dio2133: audio-amplifier-0 {
15 compatible = "simple-audio-amp
16 enable-gpios = <&gpio_ao GPIOA
17 VCC-supply = <&vcc_5v>;
18 sound-name-prefix = "U19";
19 status = "okay";
20 };
21
22 hub_5v: regulator-hub-5v {
23 compatible = "regulator-fixed"
24 regulator-name = "HUB_5V";
25 regulator-min-microvolt = <500
26 regulator-max-microvolt = <500
27 vin-supply = <&vcc_5v>;
28
29 /* Connected to the Hub CHIPEN
30 gpio = <&gpio GPIOH_5 GPIO_ACT
31 enable-active-high;
32 };
33
34 /* USB hub supports both USB 2.0 and U
35 usb-hub {
36 dr_mode = "host";
37 #address-cells = <1>;
38 #size-cells = <0>;
39
40 /* 2.0 hub on port 1 */
41 hub_2_0: hub@1 {
42 compatible = "usb5e3,6
43 reg = <1>;
44 peer-hub = <&hub_3_0>;
45 vdd-supply = <&usb_pwr
46 };
47
48 /* 3.0 hub on port 4 */
49 hub_3_0: hub@2 {
50 compatible = "usb5e3,6
51 reg = <2>;
52 peer-hub = <&hub_2_0>;
53 reset-gpios = <&gpio G
54 vdd-supply = <&vcc_5v>
55 };
56 };
57
58 sound {
59 compatible = "amlogic,axg-soun
60 model = "ODROID-N2";
61 audio-widgets = "Line", "Lineo
62 audio-aux-devs = <&tdmout_b>,
63 <&tdmin_b>, <
64 <&dio2133>;
65 audio-routing = "TDMOUT_B IN 0
66 "TDMOUT_B IN 1
67 "TDMOUT_B IN 2
68 "TDM_B Playbac
69 "TDMOUT_C IN 0
70 "TDMOUT_C IN 1
71 "TDMOUT_C IN 2
72 "TDM_C Playbac
73 "TDMIN_A IN 4"
74 "TDMIN_B IN 4"
75 "TDMIN_C IN 4"
76 "TDMIN_LB IN 1
77 "TDMIN_A IN 5"
78 "TDMIN_B IN 5"
79 "TDMIN_C IN 5"
80 "TDMIN_LB IN 2
81 "TODDR_A IN 0"
82 "TODDR_B IN 0"
83 "TODDR_C IN 0"
84 "TODDR_A IN 1"
85 "TODDR_B IN 1"
86 "TODDR_C IN 1"
87 "TODDR_A IN 2"
88 "TODDR_B IN 2"
89 "TODDR_C IN 2"
90 "TODDR_A IN 6"
91 "TODDR_B IN 6"
92 "TODDR_C IN 6"
93 "U19 INL", "AC
94 "U19 INR", "AC
95 "Lineout", "U1
96 "Lineout", "U1
97
98 clocks = <&clkc CLKID_MPLL2>,
99 <&clkc CLKID_MPLL0>,
100 <&clkc CLKID_MPLL1>;
101
102 assigned-clocks = <&clkc CLKID
103 <&clkc CLKID
104 <&clkc CLKID
105 assigned-clock-parents = <0>,
106 assigned-clock-rates = <294912
107 <270950
108 <393216
109
110 dai-link-0 {
111 sound-dai = <&frddr_a>
112 };
113
114 dai-link-1 {
115 sound-dai = <&frddr_b>
116 };
117
118 dai-link-2 {
119 sound-dai = <&frddr_c>
120 };
121
122 dai-link-3 {
123 sound-dai = <&toddr_a>
124 };
125
126 dai-link-4 {
127 sound-dai = <&toddr_b>
128 };
129
130 dai-link-5 {
131 sound-dai = <&toddr_c>
132 };
133
134 /* 8ch hdmi interface */
135 dai-link-6 {
136 sound-dai = <&tdmif_b>
137 dai-format = "i2s";
138 dai-tdm-slot-tx-mask-0
139 dai-tdm-slot-tx-mask-1
140 dai-tdm-slot-tx-mask-2
141 dai-tdm-slot-tx-mask-3
142 mclk-fs = <256>;
143
144 codec-0 {
145 sound-dai = <&
146 };
147
148 codec-1 {
149 sound-dai = <&
150 };
151 };
152
153 /* i2s jack output interface *
154 dai-link-7 {
155 sound-dai = <&tdmif_c>
156 dai-format = "i2s";
157 dai-tdm-slot-tx-mask-0
158 mclk-fs = <256>;
159
160 codec-0 {
161 sound-dai = <&
162 };
163
164 codec-1 {
165 sound-dai = <&
166 };
167 };
168
169 /* hdmi glue */
170 dai-link-8 {
171 sound-dai = <&tohdmitx
172
173 codec {
174 sound-dai = <&
175 };
176 };
177
178 /* acodec glue */
179 dai-link-9 {
180 sound-dai = <&toacodec
181
182 codec {
183 sound-dai = <&
184 };
185 };
186 };
187 };
188
189 &acodec {
190 AVDD-supply = <&vddao_1v8>;
191 status = "okay";
192 };
193
194 ðmac {
195 pinctrl-0 = <ð_pins>, <ð_rgmii_p
196 pinctrl-names = "default";
197 status = "okay";
198 phy-mode = "rgmii";
199 phy-handle = <&external_phy>;
200 amlogic,tx-delay-ns = <2>;
201 };
202
203 &ext_mdio {
204 external_phy: ethernet-phy@0 {
205 /* Realtek RTL8211F (0x001cc91
206 reg = <0>;
207 max-speed = <1000>;
208
209 reset-assert-us = <10000>;
210 reset-deassert-us = <80000>;
211 reset-gpios = <&gpio GPIOZ_15
212
213 interrupt-parent = <&gpio_intc
214 /* MAC_INTR on GPIOZ_14 */
215 interrupts = <IRQID_GPIOZ_14 I
216 };
217 };
218
219 &gpio {
220 gpio-line-names =
221 /* GPIOZ */
222 "", "", "", "", "", "", "", ""
223 "", "", "", "", "", "", "", ""
224 /* GPIOH */
225 "", "", "", "", "", "", "", ""
226 "",
227 /* BOOT */
228 "", "", "", "", "", "", "", ""
229 "", "", "", "", "", "", "", ""
230 /* GPIOC */
231 "", "", "", "", "", "", "", ""
232 /* GPIOA */
233 "PIN_44", /* GPIOA_0 */
234 "PIN_46", /* GPIOA_1 */
235 "PIN_45", /* GPIOA_2 */
236 "PIN_47", /* GPIOA_3 */
237 "PIN_26", /* GPIOA_4 */
238 "", "", "", "", "", "",
239 "PIN_42", /* GPIOA_11 */
240 "PIN_32", /* GPIOA_12 */
241 "PIN_7", /* GPIOA_13 */
242 "PIN_27", /* GPIOA_14 */
243 "PIN_28", /* GPIOA_15 */
244 /* GPIOX */
245 "PIN_16", /* GPIOX_0 */
246 "PIN_18", /* GPIOX_1 */
247 "PIN_22", /* GPIOX_2 */
248 "PIN_11", /* GPIOX_3 */
249 "PIN_13", /* GPIOX_4 */
250 "PIN_33", /* GPIOX_5 */
251 "PIN_35", /* GPIOX_6 */
252 "PIN_15", /* GPIOX_7 */
253 "PIN_19", /* GPIOX_8 */
254 "PIN_21", /* GPIOX_9 */
255 "PIN_24", /* GPIOX_10 */
256 "PIN_23", /* GPIOX_11 */
257 "PIN_8", /* GPIOX_12 */
258 "PIN_10", /* GPIOX_13 */
259 "PIN_29", /* GPIOX_14 */
260 "PIN_31", /* GPIOX_15 */
261 "PIN_12", /* GPIOX_16 */
262 "PIN_3", /* GPIOX_17 */
263 "PIN_5", /* GPIOX_18 */
264 "PIN_36"; /* GPIOX_19 */
265 };
266
267 &i2c3 {
268 status = "okay";
269 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3
270 pinctrl-names = "default";
271
272 rtc: rtc@51 {
273 compatible = "nxp,pcf8563";
274 reg = <0x51>;
275 wakeup-source;
276 };
277 };
278
279 &ir {
280 status = "okay";
281 pinctrl-0 = <&remote_input_ao_pins>;
282 pinctrl-names = "default";
283 linux,rc-map-name = "rc-odroid";
284 };
285
286 /*
287 * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins
288 * and eMMC Data 4 to 7 pins.
289 * Replace emmc_data_8b_pins to emmc_data_4b_p
290 * and change bus-width to 4 then spifc can be
291 * The SW1 slide should also be set to the cor
292 */
293 &spifc {
294 status = "disabled";
295 pinctrl-0 = <&nor_pins>;
296 pinctrl-names = "default";
297
298 mx25u64: flash@0 {
299 #address-cells = <1>;
300 #size-cells = <1>;
301 compatible = "mxicy,mx25u6435f
302 reg = <0>;
303 spi-max-frequency = <104000000
304 };
305 };
306
307 &toacodec {
308 status = "okay";
309 };
310
311 &usb {
312 vbus-supply = <&usb_pwr_en>;
313 };
314
315 &usb2_phy1 {
316 /* Enable the hub which is connected t
317 phy-supply = <&hub_5v>;
318 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.