1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (c) 2019 BayLibre, SAS 3 * Copyright (c) 2019 BayLibre, SAS
4 * Author: Neil Armstrong <narmstrong@baylibre. 4 * Author: Neil Armstrong <narmstrong@baylibre.com>
5 * Copyright (c) 2019 Christian Hewitt <christi 5 * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
6 */ 6 */
7 7
8 /dts-v1/; 8 /dts-v1/;
9 9
10 #include "meson-g12b-w400.dtsi" !! 10 #include "meson-g12b.dtsi"
>> 11 #include "meson-g12b-s922x.dtsi"
>> 12 #include <dt-bindings/input/input.h>
>> 13 #include <dt-bindings/gpio/meson-g12a-gpio.h>
11 #include <dt-bindings/sound/meson-g12a-tohdmit 14 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
12 15
13 / { 16 / {
14 compatible = "ugoos,am6", "amlogic,s92 17 compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
15 model = "Ugoos AM6"; 18 model = "Ugoos AM6";
16 19
>> 20 aliases {
>> 21 serial0 = &uart_AO;
>> 22 ethernet0 = ðmac;
>> 23 };
>> 24
>> 25 chosen {
>> 26 stdout-path = "serial0:115200n8";
>> 27 };
>> 28
>> 29 memory@0 {
>> 30 device_type = "memory";
>> 31 reg = <0x0 0x0 0x0 0x40000000>;
>> 32 };
>> 33
>> 34 emmc_pwrseq: emmc-pwrseq {
>> 35 compatible = "mmc-pwrseq-emmc";
>> 36 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
>> 37 };
>> 38
>> 39 sdio_pwrseq: sdio-pwrseq {
>> 40 compatible = "mmc-pwrseq-simple";
>> 41 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
>> 42 clocks = <&wifi32k>;
>> 43 clock-names = "ext_clock";
>> 44 };
>> 45
17 spdif_dit: audio-codec-1 { 46 spdif_dit: audio-codec-1 {
18 #sound-dai-cells = <0>; 47 #sound-dai-cells = <0>;
19 compatible = "linux,spdif-dit" 48 compatible = "linux,spdif-dit";
>> 49 status = "okay";
20 sound-name-prefix = "DIT"; 50 sound-name-prefix = "DIT";
21 }; 51 };
22 52
>> 53 flash_1v8: regulator-flash_1v8 {
>> 54 compatible = "regulator-fixed";
>> 55 regulator-name = "FLASH_1V8";
>> 56 regulator-min-microvolt = <1800000>;
>> 57 regulator-max-microvolt = <1800000>;
>> 58 vin-supply = <&vcc_3v3>;
>> 59 regulator-always-on;
>> 60 };
>> 61
>> 62 main_12v: regulator-main_12v {
>> 63 compatible = "regulator-fixed";
>> 64 regulator-name = "12V";
>> 65 regulator-min-microvolt = <12000000>;
>> 66 regulator-max-microvolt = <12000000>;
>> 67 regulator-always-on;
>> 68 };
>> 69
>> 70 vcc_5v: regulator-vcc_5v {
>> 71 compatible = "regulator-fixed";
>> 72 regulator-name = "VCC_5V";
>> 73 regulator-min-microvolt = <5000000>;
>> 74 regulator-max-microvolt = <5000000>;
>> 75 vin-supply = <&main_12v>;
>> 76
>> 77 gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
>> 78 enable-active-high;
>> 79 };
>> 80
>> 81 vcc_1v8: regulator-vcc_1v8 {
>> 82 compatible = "regulator-fixed";
>> 83 regulator-name = "VCC_1V8";
>> 84 regulator-min-microvolt = <1800000>;
>> 85 regulator-max-microvolt = <1800000>;
>> 86 vin-supply = <&vcc_3v3>;
>> 87 regulator-always-on;
>> 88 };
>> 89
>> 90 vcc_3v3: regulator-vcc_3v3 {
>> 91 compatible = "regulator-fixed";
>> 92 regulator-name = "VCC_3V3";
>> 93 regulator-min-microvolt = <3300000>;
>> 94 regulator-max-microvolt = <3300000>;
>> 95 vin-supply = <&vddao_3v3>;
>> 96 regulator-always-on;
>> 97 /* FIXME: actually controlled by VDDCPU_B_EN */
>> 98 };
>> 99
>> 100 vddcpu_a: regulator-vddcpu-a {
>> 101 /*
>> 102 * MP1653 Regulator.
>> 103 */
>> 104 compatible = "pwm-regulator";
>> 105
>> 106 regulator-name = "VDDCPU_A";
>> 107 regulator-min-microvolt = <721000>;
>> 108 regulator-max-microvolt = <1022000>;
>> 109
>> 110 vin-supply = <&main_12v>;
>> 111
>> 112 pwms = <&pwm_ab 0 1250 0>;
>> 113 pwm-dutycycle-range = <100 0>;
>> 114
>> 115 regulator-boot-on;
>> 116 regulator-always-on;
>> 117 };
>> 118
>> 119 vddcpu_b: regulator-vddcpu-b {
>> 120 /*
>> 121 * MP1652 Regulator.
>> 122 */
>> 123 compatible = "pwm-regulator";
>> 124
>> 125 regulator-name = "VDDCPU_B";
>> 126 regulator-min-microvolt = <721000>;
>> 127 regulator-max-microvolt = <1022000>;
>> 128
>> 129 vin-supply = <&main_12v>;
>> 130
>> 131 pwms = <&pwm_AO_cd 1 1250 0>;
>> 132 pwm-dutycycle-range = <100 0>;
>> 133
>> 134 regulator-boot-on;
>> 135 regulator-always-on;
>> 136 };
>> 137
>> 138 usb1_pow: regulator-usb1-pow {
>> 139 compatible = "regulator-fixed";
>> 140 regulator-name = "USB1_POW";
>> 141 regulator-min-microvolt = <5000000>;
>> 142 regulator-max-microvolt = <5000000>;
>> 143 vin-supply = <&vcc_5v>;
>> 144
>> 145 /* connected to SY6280A Power Switch */
>> 146 gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
>> 147 enable-active-high;
>> 148 };
>> 149
>> 150 usb_pwr_en: regulator-usb-pwr-en {
>> 151 compatible = "regulator-fixed";
>> 152 regulator-name = "USB_PWR_EN";
>> 153 regulator-min-microvolt = <5000000>;
>> 154 regulator-max-microvolt = <5000000>;
>> 155 vin-supply = <&vcc_5v>;
>> 156
>> 157 /* Connected to USB3 Type-A Port power enable */
>> 158 gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
>> 159 enable-active-high;
>> 160 };
>> 161
>> 162 vddao_1v8: regulator-vddao-1v8 {
>> 163 compatible = "regulator-fixed";
>> 164 regulator-name = "VDDAO_1V8";
>> 165 regulator-min-microvolt = <1800000>;
>> 166 regulator-max-microvolt = <1800000>;
>> 167 vin-supply = <&vddao_3v3>;
>> 168 regulator-always-on;
>> 169 };
>> 170
>> 171 vddao_3v3: regulator-vddao-3v3 {
>> 172 compatible = "regulator-fixed";
>> 173 regulator-name = "VDDAO_3V3";
>> 174 regulator-min-microvolt = <3300000>;
>> 175 regulator-max-microvolt = <3300000>;
>> 176 vin-supply = <&main_12v>;
>> 177 regulator-always-on;
>> 178 };
>> 179
>> 180 cvbs-connector {
>> 181 compatible = "composite-video-connector";
>> 182
>> 183 port {
>> 184 cvbs_connector_in: endpoint {
>> 185 remote-endpoint = <&cvbs_vdac_out>;
>> 186 };
>> 187 };
>> 188 };
>> 189
>> 190 hdmi-connector {
>> 191 compatible = "hdmi-connector";
>> 192 type = "a";
>> 193
>> 194 port {
>> 195 hdmi_connector_in: endpoint {
>> 196 remote-endpoint = <&hdmi_tx_tmds_out>;
>> 197 };
>> 198 };
>> 199 };
>> 200
23 sound { 201 sound {
24 compatible = "amlogic,axg-soun 202 compatible = "amlogic,axg-sound-card";
25 model = "UGOOS-AM6"; !! 203 model = "G12B-UGOOS-AM6";
26 audio-aux-devs = <&tdmout_b>; 204 audio-aux-devs = <&tdmout_b>;
27 audio-routing = "TDMOUT_B IN 0 205 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
28 "TDMOUT_B IN 1 206 "TDMOUT_B IN 1", "FRDDR_B OUT 1",
29 "TDMOUT_B IN 2 207 "TDMOUT_B IN 2", "FRDDR_C OUT 1",
30 "TDM_B Playbac 208 "TDM_B Playback", "TDMOUT_B OUT",
31 "SPDIFOUT_A IN !! 209 "SPDIFOUT IN 0", "FRDDR_A OUT 3",
32 "SPDIFOUT_A IN !! 210 "SPDIFOUT IN 1", "FRDDR_B OUT 3",
33 "SPDIFOUT_A IN !! 211 "SPDIFOUT IN 2", "FRDDR_C OUT 3";
34 <<
35 clocks = <&clkc CLKID_MPLL2>, <<
36 <&clkc CLKID_MPLL0>, <<
37 <&clkc CLKID_MPLL1>; <<
38 212
39 assigned-clocks = <&clkc CLKID 213 assigned-clocks = <&clkc CLKID_MPLL2>,
40 <&clkc CLKID 214 <&clkc CLKID_MPLL0>,
41 <&clkc CLKID 215 <&clkc CLKID_MPLL1>;
42 assigned-clock-parents = <0>, 216 assigned-clock-parents = <0>, <0>, <0>;
43 assigned-clock-rates = <294912 217 assigned-clock-rates = <294912000>,
44 <270950 218 <270950400>,
45 <393216 219 <393216000>;
>> 220 status = "okay";
46 221
47 dai-link-0 { 222 dai-link-0 {
48 sound-dai = <&frddr_a> 223 sound-dai = <&frddr_a>;
49 }; 224 };
50 225
51 dai-link-1 { 226 dai-link-1 {
52 sound-dai = <&frddr_b> 227 sound-dai = <&frddr_b>;
53 }; 228 };
54 229
55 dai-link-2 { 230 dai-link-2 {
56 sound-dai = <&frddr_c> 231 sound-dai = <&frddr_c>;
57 }; 232 };
58 233
59 /* 8ch hdmi interface */ 234 /* 8ch hdmi interface */
60 dai-link-3 { 235 dai-link-3 {
61 sound-dai = <&tdmif_b> 236 sound-dai = <&tdmif_b>;
62 dai-format = "i2s"; 237 dai-format = "i2s";
63 dai-tdm-slot-tx-mask-0 238 dai-tdm-slot-tx-mask-0 = <1 1>;
64 dai-tdm-slot-tx-mask-1 239 dai-tdm-slot-tx-mask-1 = <1 1>;
65 dai-tdm-slot-tx-mask-2 240 dai-tdm-slot-tx-mask-2 = <1 1>;
66 dai-tdm-slot-tx-mask-3 241 dai-tdm-slot-tx-mask-3 = <1 1>;
67 mclk-fs = <256>; 242 mclk-fs = <256>;
68 243
69 codec { 244 codec {
70 sound-dai = <& 245 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
71 }; 246 };
72 }; 247 };
73 248
74 /* spdif hdmi or toslink inter 249 /* spdif hdmi or toslink interface */
75 dai-link-4 { 250 dai-link-4 {
76 sound-dai = <&spdifout !! 251 sound-dai = <&spdifout>;
77 252
78 codec-0 { 253 codec-0 {
79 sound-dai = <& 254 sound-dai = <&spdif_dit>;
80 }; 255 };
81 256
82 codec-1 { 257 codec-1 {
83 sound-dai = <& 258 sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
84 }; 259 };
85 }; 260 };
86 261
87 /* spdif hdmi interface */ 262 /* spdif hdmi interface */
88 dai-link-5 { 263 dai-link-5 {
89 sound-dai = <&spdifout 264 sound-dai = <&spdifout_b>;
90 265
91 codec { 266 codec {
92 sound-dai = <& 267 sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
93 }; 268 };
94 }; 269 };
95 270
96 /* hdmi glue */ 271 /* hdmi glue */
97 dai-link-6 { 272 dai-link-6 {
98 sound-dai = <&tohdmitx 273 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
99 274
100 codec { 275 codec {
101 sound-dai = <& 276 sound-dai = <&hdmi_tx>;
102 }; 277 };
103 }; 278 };
104 }; 279 };
>> 280
>> 281 wifi32k: wifi32k {
>> 282 compatible = "pwm-clock";
>> 283 #clock-cells = <0>;
>> 284 clock-frequency = <32768>;
>> 285 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
>> 286 };
105 }; 287 };
106 288
107 &arb { 289 &arb {
108 status = "okay"; 290 status = "okay";
109 }; 291 };
110 292
>> 293 &cec_AO {
>> 294 pinctrl-0 = <&cec_ao_a_h_pins>;
>> 295 pinctrl-names = "default";
>> 296 status = "disabled";
>> 297 hdmi-phandle = <&hdmi_tx>;
>> 298 };
>> 299
>> 300 &cecb_AO {
>> 301 pinctrl-0 = <&cec_ao_b_h_pins>;
>> 302 pinctrl-names = "default";
>> 303 status = "okay";
>> 304 hdmi-phandle = <&hdmi_tx>;
>> 305 };
>> 306
111 &clkc_audio { 307 &clkc_audio {
112 status = "okay"; 308 status = "okay";
113 }; 309 };
114 310
>> 311 &cpu0 {
>> 312 cpu-supply = <&vddcpu_b>;
>> 313 operating-points-v2 = <&cpu_opp_table_0>;
>> 314 clocks = <&clkc CLKID_CPU_CLK>;
>> 315 clock-latency = <50000>;
>> 316 };
>> 317
>> 318 &cpu1 {
>> 319 cpu-supply = <&vddcpu_b>;
>> 320 operating-points-v2 = <&cpu_opp_table_0>;
>> 321 clocks = <&clkc CLKID_CPU_CLK>;
>> 322 clock-latency = <50000>;
>> 323 };
>> 324
>> 325 &cpu100 {
>> 326 cpu-supply = <&vddcpu_a>;
>> 327 operating-points-v2 = <&cpub_opp_table_1>;
>> 328 clocks = <&clkc CLKID_CPUB_CLK>;
>> 329 clock-latency = <50000>;
>> 330 };
>> 331
>> 332 &cpu101 {
>> 333 cpu-supply = <&vddcpu_a>;
>> 334 operating-points-v2 = <&cpub_opp_table_1>;
>> 335 clocks = <&clkc CLKID_CPUB_CLK>;
>> 336 clock-latency = <50000>;
>> 337 };
>> 338
>> 339 &cpu102 {
>> 340 cpu-supply = <&vddcpu_a>;
>> 341 operating-points-v2 = <&cpub_opp_table_1>;
>> 342 clocks = <&clkc CLKID_CPUB_CLK>;
>> 343 clock-latency = <50000>;
>> 344 };
>> 345
>> 346 &cpu103 {
>> 347 cpu-supply = <&vddcpu_a>;
>> 348 operating-points-v2 = <&cpub_opp_table_1>;
>> 349 clocks = <&clkc CLKID_CPUB_CLK>;
>> 350 clock-latency = <50000>;
>> 351 };
>> 352
>> 353 &cvbs_vdac_port {
>> 354 cvbs_vdac_out: endpoint {
>> 355 remote-endpoint = <&cvbs_connector_in>;
>> 356 };
>> 357 };
>> 358
>> 359 &ext_mdio {
>> 360 external_phy: ethernet-phy@0 {
>> 361 /* Realtek RTL8211F (0x001cc916) */
>> 362 reg = <0>;
>> 363 max-speed = <1000>;
>> 364
>> 365 reset-assert-us = <10000>;
>> 366 reset-deassert-us = <30000>;
>> 367 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
>> 368
>> 369 interrupt-parent = <&gpio_intc>;
>> 370 /* MAC_INTR on GPIOZ_14 */
>> 371 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
>> 372 };
>> 373 };
>> 374
>> 375 ðmac {
>> 376 pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
>> 377 pinctrl-names = "default";
>> 378 status = "okay";
>> 379 phy-mode = "rgmii";
>> 380 phy-handle = <&external_phy>;
>> 381 amlogic,tx-delay-ns = <2>;
>> 382 };
>> 383
115 &frddr_a { 384 &frddr_a {
116 status = "okay"; 385 status = "okay";
117 }; 386 };
118 387
119 &frddr_b { 388 &frddr_b {
120 status = "okay"; 389 status = "okay";
121 }; 390 };
122 391
123 &frddr_c { 392 &frddr_c {
124 status = "okay"; 393 status = "okay";
125 }; 394 };
126 395
>> 396 &hdmi_tx {
>> 397 status = "okay";
>> 398 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
>> 399 pinctrl-names = "default";
>> 400 hdmi-supply = <&vcc_5v>;
>> 401 };
>> 402
>> 403 &hdmi_tx_tmds_port {
>> 404 hdmi_tx_tmds_out: endpoint {
>> 405 remote-endpoint = <&hdmi_connector_in>;
>> 406 };
>> 407 };
>> 408
127 &ir { 409 &ir {
>> 410 status = "okay";
>> 411 pinctrl-0 = <&remote_input_ao_pins>;
>> 412 pinctrl-names = "default";
128 linux,rc-map-name = "rc-khadas"; 413 linux,rc-map-name = "rc-khadas";
129 }; 414 };
130 415
131 &spdifout_a { !! 416 &pwm_ab {
>> 417 pinctrl-0 = <&pwm_a_e_pins>;
>> 418 pinctrl-names = "default";
>> 419 clocks = <&xtal>;
>> 420 clock-names = "clkin0";
>> 421 status = "okay";
>> 422 };
>> 423
>> 424 &pwm_AO_cd {
>> 425 pinctrl-0 = <&pwm_ao_d_e_pins>;
>> 426 pinctrl-names = "default";
>> 427 clocks = <&xtal>;
>> 428 clock-names = "clkin1";
>> 429 status = "okay";
>> 430 };
>> 431
>> 432 &pwm_ef {
>> 433 pinctrl-0 = <&pwm_e_pins>;
>> 434 pinctrl-names = "default";
>> 435 clocks = <&xtal>;
>> 436 clock-names = "clkin0";
>> 437 status = "okay";
>> 438 };
>> 439
>> 440 /* SDIO */
>> 441 &sd_emmc_a {
>> 442 status = "okay";
>> 443 pinctrl-0 = <&sdio_pins>;
>> 444 pinctrl-1 = <&sdio_clk_gate_pins>;
>> 445 pinctrl-names = "default", "clk-gate";
>> 446 #address-cells = <1>;
>> 447 #size-cells = <0>;
>> 448
>> 449 bus-width = <4>;
>> 450 cap-sd-highspeed;
>> 451 sd-uhs-sdr50;
>> 452 max-frequency = <100000000>;
>> 453
>> 454 non-removable;
>> 455 disable-wp;
>> 456
>> 457 mmc-pwrseq = <&sdio_pwrseq>;
>> 458
>> 459 vmmc-supply = <&vddao_3v3>;
>> 460 vqmmc-supply = <&vddao_1v8>;
>> 461
>> 462 brcmf: wifi@1 {
>> 463 reg = <1>;
>> 464 compatible = "brcm,bcm4329-fmac";
>> 465 };
>> 466 };
>> 467
>> 468 /* SD card */
>> 469 &sd_emmc_b {
>> 470 status = "okay";
>> 471 pinctrl-0 = <&sdcard_c_pins>;
>> 472 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
>> 473 pinctrl-names = "default", "clk-gate";
>> 474
>> 475 bus-width = <4>;
>> 476 cap-sd-highspeed;
>> 477 max-frequency = <50000000>;
>> 478 disable-wp;
>> 479
>> 480 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
>> 481 vmmc-supply = <&vddao_3v3>;
>> 482 vqmmc-supply = <&vddao_3v3>;
>> 483 };
>> 484
>> 485 /* eMMC */
>> 486 &sd_emmc_c {
>> 487 status = "okay";
>> 488 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
>> 489 pinctrl-1 = <&emmc_clk_gate_pins>;
>> 490 pinctrl-names = "default", "clk-gate";
>> 491
>> 492 bus-width = <8>;
>> 493 cap-mmc-highspeed;
>> 494 max-frequency = <100000000>;
>> 495 disable-wp;
>> 496
>> 497 mmc-pwrseq = <&emmc_pwrseq>;
>> 498 vmmc-supply = <&vcc_3v3>;
>> 499 vqmmc-supply = <&flash_1v8>;
>> 500 };
>> 501
>> 502 &spdifout {
132 pinctrl-0 = <&spdif_out_h_pins>; 503 pinctrl-0 = <&spdif_out_h_pins>;
133 pinctrl-names = "default"; 504 pinctrl-names = "default";
134 status = "okay"; 505 status = "okay";
135 }; 506 };
136 507
137 &spdifout_b { 508 &spdifout_b {
138 status = "okay"; 509 status = "okay";
139 }; 510 };
140 511
141 &tdmif_b { 512 &tdmif_b {
142 status = "okay"; 513 status = "okay";
143 }; 514 };
144 515
145 &tdmout_b { 516 &tdmout_b {
146 status = "okay"; 517 status = "okay";
147 }; 518 };
148 519
149 &tohdmitx { 520 &tohdmitx {
150 status = "okay"; 521 status = "okay";
151 }; 522 };
152 523
153 &uart_A { 524 &uart_A {
154 status = "okay"; 525 status = "okay";
155 pinctrl-0 = <&uart_a_pins>, <&uart_a_c 526 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
156 pinctrl-names = "default"; 527 pinctrl-names = "default";
157 uart-has-rtscts; 528 uart-has-rtscts;
158 529
159 bluetooth { 530 bluetooth {
160 compatible = "brcm,bcm43438-bt 531 compatible = "brcm,bcm43438-bt";
161 shutdown-gpios = <&gpio GPIOX_ 532 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
162 max-speed = <2000000>; 533 max-speed = <2000000>;
163 clocks = <&wifi32k>; 534 clocks = <&wifi32k>;
164 clock-names = "lpo"; 535 clock-names = "lpo";
165 }; 536 };
166 }; 537 };
167 538
168 &uart_AO { 539 &uart_AO {
169 status = "okay"; 540 status = "okay";
170 pinctrl-0 = <&uart_ao_a_pins>; 541 pinctrl-0 = <&uart_ao_a_pins>;
171 pinctrl-names = "default"; 542 pinctrl-names = "default";
172 }; 543 };
173 544
174 &usb { 545 &usb {
175 status = "okay"; 546 status = "okay";
176 dr_mode = "host"; 547 dr_mode = "host";
177 vbus-supply = <&usb_pwr_en>; 548 vbus-supply = <&usb_pwr_en>;
178 }; 549 };
179 550
180 &usb2_phy0 { 551 &usb2_phy0 {
181 phy-supply = <&usb1_pow>; 552 phy-supply = <&usb1_pow>;
182 }; 553 };
183 554
184 &usb2_phy1 { 555 &usb2_phy1 {
185 phy-supply = <&usb1_pow>; 556 phy-supply = <&usb1_pow>;
186 }; 557 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.