1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (c) 2023 BayLibre, SAS. 3 * Copyright (c) 2023 BayLibre, SAS.
4 * Author: Jerome Brunet <jbrunet@baylibre.com> 4 * Author: Jerome Brunet <jbrunet@baylibre.com>
5 */ 5 */
6 6
7 #include <dt-bindings/clock/g12a-clkc.h> 7 #include <dt-bindings/clock/g12a-clkc.h>
8 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/gpio/meson-g12a-gpio.h> 11 #include <dt-bindings/gpio/meson-g12a-gpio.h>
12 #include <dt-bindings/sound/meson-g12a-toacode 12 #include <dt-bindings/sound/meson-g12a-toacodec.h>
13 #include <dt-bindings/sound/meson-g12a-tohdmit 13 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
14 14
15 / { 15 / {
16 aliases { 16 aliases {
17 serial0 = &uart_AO; 17 serial0 = &uart_AO;
18 ethernet0 = ðmac; 18 ethernet0 = ðmac;
19 spi0 = &spifc; 19 spi0 = &spifc;
20 }; 20 };
21 21
22 memory@0 { 22 memory@0 {
23 device_type = "memory"; 23 device_type = "memory";
24 reg = <0x0 0x0 0x0 0x80000000> 24 reg = <0x0 0x0 0x0 0x80000000>;
25 }; 25 };
26 26
27 chosen { 27 chosen {
28 stdout-path = "serial0:115200n 28 stdout-path = "serial0:115200n8";
29 }; 29 };
30 30
31 dioo2133: audio-amplifier-0 { 31 dioo2133: audio-amplifier-0 {
32 compatible = "simple-audio-amp 32 compatible = "simple-audio-amplifier";
33 enable-gpios = <&gpio GPIOX_0 33 enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>;
34 VCC-supply = <&vcc_5v>; 34 VCC-supply = <&vcc_5v>;
35 sound-name-prefix = "10U2"; 35 sound-name-prefix = "10U2";
36 }; 36 };
37 37
38 /* TOFIX: handle CVBS_DET on SARADC ch 38 /* TOFIX: handle CVBS_DET on SARADC channel 0 */
39 cvbs-connector { 39 cvbs-connector {
40 compatible = "composite-video- 40 compatible = "composite-video-connector";
41 41
42 port { 42 port {
43 cvbs_connector_in: end 43 cvbs_connector_in: endpoint {
44 remote-endpoin 44 remote-endpoint = <&cvbs_vdac_out>;
45 }; 45 };
46 }; 46 };
47 }; 47 };
48 48
49 emmc_pwrseq: emmc-pwrseq { 49 emmc_pwrseq: emmc-pwrseq {
50 compatible = "mmc-pwrseq-emmc" 50 compatible = "mmc-pwrseq-emmc";
51 reset-gpios = <&gpio BOOT_12 G 51 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
52 }; 52 };
53 53
54 hdmi-connector { 54 hdmi-connector {
55 compatible = "hdmi-connector"; 55 compatible = "hdmi-connector";
56 type = "a"; 56 type = "a";
57 57
58 port { 58 port {
59 hdmi_connector_in: end 59 hdmi_connector_in: endpoint {
60 remote-endpoin 60 remote-endpoint = <&hdmi_tx_tmds_out>;
61 }; 61 };
62 }; 62 };
63 }; 63 };
64 64
65 led-blue { 65 led-blue {
66 compatible = "pwm-leds"; 66 compatible = "pwm-leds";
67 67
68 led { 68 led {
69 color = <LED_COLOR_ID_ 69 color = <LED_COLOR_ID_BLUE>;
70 function = LED_FUNCTIO 70 function = LED_FUNCTION_ACTIVITY;
71 linux,default-trigger 71 linux,default-trigger = "heartbeat";
72 max-brightness = <255> 72 max-brightness = <255>;
73 pwms = <&pwm_ab 1 1250 73 pwms = <&pwm_ab 1 1250 0>;
74 active-low; 74 active-low;
75 }; 75 };
76 }; 76 };
77 77
78 led-green { 78 led-green {
79 compatible = "pwm-leds"; 79 compatible = "pwm-leds";
80 80
81 led { 81 led {
82 color = <LED_COLOR_ID_ 82 color = <LED_COLOR_ID_GREEN>;
83 function = LED_FUNCTIO 83 function = LED_FUNCTION_STATUS;
84 linux,default-trigger 84 linux,default-trigger = "default-on";
85 max-brightness = <255> 85 max-brightness = <255>;
86 pwms = <&pwm_cd 1 1250 86 pwms = <&pwm_cd 1 1250 0>;
87 active-low; 87 active-low;
88 }; 88 };
89 }; 89 };
90 90
91 led-orange { 91 led-orange {
92 compatible = "gpio-leds"; 92 compatible = "gpio-leds";
93 93
94 led { 94 led {
95 color = <LED_COLOR_ID_ 95 color = <LED_COLOR_ID_AMBER>;
96 function = LED_FUNCTIO 96 function = LED_FUNCTION_STANDBY;
97 gpios = <&gpio GPIOX_6 97 gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
98 panic-indicator; 98 panic-indicator;
99 }; 99 };
100 }; 100 };
101 101
102 dc_in: regulator-dc-in { 102 dc_in: regulator-dc-in {
103 compatible = "regulator-fixed" 103 compatible = "regulator-fixed";
104 regulator-name = "5V_IN"; 104 regulator-name = "5V_IN";
105 regulator-min-microvolt = <500 105 regulator-min-microvolt = <5000000>;
106 regulator-max-microvolt = <500 106 regulator-max-microvolt = <5000000>;
107 regulator-always-on; 107 regulator-always-on;
108 }; 108 };
109 109
110 flash_1v8: regulator-flash-1v8 { 110 flash_1v8: regulator-flash-1v8 {
111 compatible = "regulator-fixed" 111 compatible = "regulator-fixed";
112 regulator-name = "FLASH_1V8"; 112 regulator-name = "FLASH_1V8";
113 regulator-min-microvolt = <180 113 regulator-min-microvolt = <1800000>;
114 regulator-max-microvolt = <180 114 regulator-max-microvolt = <1800000>;
115 regulator-always-on; 115 regulator-always-on;
116 vin-supply = <&vcc_3v3>; 116 vin-supply = <&vcc_3v3>;
117 }; 117 };
118 118
119 vcc_card: regulator-vcc-card { 119 vcc_card: regulator-vcc-card {
120 compatible = "regulator-fixed" 120 compatible = "regulator-fixed";
121 regulator-name = "VCC_CARD"; 121 regulator-name = "VCC_CARD";
122 regulator-min-microvolt = <330 122 regulator-min-microvolt = <3300000>;
123 regulator-max-microvolt = <330 123 regulator-max-microvolt = <3300000>;
124 vin-supply = <&vddao_3v3>; 124 vin-supply = <&vddao_3v3>;
125 gpio = <&gpio GPIOX_2 (GPIO_AC 125 gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
126 enable-active-high; 126 enable-active-high;
127 gpio-open-drain; 127 gpio-open-drain;
128 }; 128 };
129 129
130 vcc_3v3: regulator-vcc-3v3 { 130 vcc_3v3: regulator-vcc-3v3 {
131 compatible = "regulator-fixed" 131 compatible = "regulator-fixed";
132 regulator-name = "VCC_3V3"; 132 regulator-name = "VCC_3V3";
133 regulator-min-microvolt = <330 133 regulator-min-microvolt = <3300000>;
134 regulator-max-microvolt = <330 134 regulator-max-microvolt = <3300000>;
135 regulator-always-on; 135 regulator-always-on;
136 vin-supply = <&vddao_3v3>; 136 vin-supply = <&vddao_3v3>;
137 137
138 /* FIXME: controlled by TEST_N 138 /* FIXME: controlled by TEST_N */
139 }; 139 };
140 140
141 vcc_5v: regulator-vcc-5v { 141 vcc_5v: regulator-vcc-5v {
142 compatible = "regulator-fixed" 142 compatible = "regulator-fixed";
143 regulator-name = "VCC_5V"; 143 regulator-name = "VCC_5V";
144 regulator-min-microvolt = <500 144 regulator-min-microvolt = <5000000>;
145 regulator-max-microvolt = <500 145 regulator-max-microvolt = <5000000>;
146 regulator-always-on; 146 regulator-always-on;
147 vin-supply = <&dc_in>; 147 vin-supply = <&dc_in>;
148 gpio = <&gpio GPIOH_8 (GPIO_AC 148 gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
149 enable-active-high; 149 enable-active-high;
150 gpio-open-drain; 150 gpio-open-drain;
151 }; 151 };
152 152
153 vddao_3v3: regulator-vddao-3v3 { 153 vddao_3v3: regulator-vddao-3v3 {
154 compatible = "regulator-fixed" 154 compatible = "regulator-fixed";
155 regulator-name = "VDDAO_3V3"; 155 regulator-name = "VDDAO_3V3";
156 regulator-min-microvolt = <330 156 regulator-min-microvolt = <3300000>;
157 regulator-max-microvolt = <330 157 regulator-max-microvolt = <3300000>;
158 regulator-always-on; 158 regulator-always-on;
159 vin-supply = <&dc_in>; 159 vin-supply = <&dc_in>;
160 }; 160 };
161 161
162 vddcpu_b: regulator-vddcpu-b { 162 vddcpu_b: regulator-vddcpu-b {
163 compatible = "pwm-regulator"; 163 compatible = "pwm-regulator";
164 regulator-name = "VDDCPU_B"; 164 regulator-name = "VDDCPU_B";
165 regulator-min-microvolt = <730 165 regulator-min-microvolt = <730000>;
166 regulator-max-microvolt = <101 166 regulator-max-microvolt = <1011000>;
167 regulator-boot-on; 167 regulator-boot-on;
168 regulator-always-on; 168 regulator-always-on;
169 pwm-supply = <&dc_in>; 169 pwm-supply = <&dc_in>;
170 pwms = <&pwm_AO_cd 1 1250 0>; 170 pwms = <&pwm_AO_cd 1 1250 0>;
171 pwm-dutycycle-range = <100 0>; 171 pwm-dutycycle-range = <100 0>;
172 }; 172 };
173 173
174 vddio_ao18: regulator-vddio-ao18 { 174 vddio_ao18: regulator-vddio-ao18 {
175 compatible = "regulator-fixed" 175 compatible = "regulator-fixed";
176 regulator-name = "VDDIO_AO18"; 176 regulator-name = "VDDIO_AO18";
177 regulator-min-microvolt = <180 177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <180 178 regulator-max-microvolt = <1800000>;
179 regulator-always-on; 179 regulator-always-on;
180 vin-supply = <&vddao_3v3>; 180 vin-supply = <&vddao_3v3>;
181 }; 181 };
182 182
183 vddio_c: regulator-vddio-c { 183 vddio_c: regulator-vddio-c {
184 compatible = "regulator-gpio"; 184 compatible = "regulator-gpio";
185 regulator-name = "VDDIO_C"; 185 regulator-name = "VDDIO_C";
186 regulator-min-microvolt = <180 186 regulator-min-microvolt = <1800000>;
187 regulator-max-microvolt = <330 187 regulator-max-microvolt = <3300000>;
188 regulator-settling-time-up-us 188 regulator-settling-time-up-us = <200>;
189 regulator-settling-time-down-u 189 regulator-settling-time-down-us = <50000>;
190 vin-supply = <&vddao_3v3>; 190 vin-supply = <&vddao_3v3>;
191 gpios = <&gpio GPIOX_4 GPIO_AC 191 gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>;
192 states = <3300000 0>, 192 states = <3300000 0>,
193 <1800000 1>; 193 <1800000 1>;
194 }; 194 };
195 195
196 sound { 196 sound {
197 compatible = "amlogic,axg-soun 197 compatible = "amlogic,axg-sound-card";
198 audio-widgets = "Line", "Lineo 198 audio-widgets = "Line", "Lineout";
199 audio-aux-devs = <&tdmout_a>, 199 audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
200 <&tdmin_a>, < 200 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
201 <&dioo2133>; 201 <&dioo2133>;
202 202
203 clocks = <&clkc CLKID_MPLL2>, 203 clocks = <&clkc CLKID_MPLL2>,
204 <&clkc CLKID_MPLL0>, 204 <&clkc CLKID_MPLL0>,
205 <&clkc CLKID_MPLL1>; 205 <&clkc CLKID_MPLL1>;
206 206
207 assigned-clocks = <&clkc CLKID 207 assigned-clocks = <&clkc CLKID_MPLL2>,
208 <&clkc CLKID 208 <&clkc CLKID_MPLL0>,
209 <&clkc CLKID 209 <&clkc CLKID_MPLL1>;
210 assigned-clock-parents = <0>, 210 assigned-clock-parents = <0>, <0>, <0>;
211 assigned-clock-rates = <294912 211 assigned-clock-rates = <294912000>,
212 <270950 212 <270950400>,
213 <393216 213 <393216000>;
214 214
215 dai-link-0 { 215 dai-link-0 {
216 sound-dai = <&frddr_a> 216 sound-dai = <&frddr_a>;
217 }; 217 };
218 218
219 dai-link-1 { 219 dai-link-1 {
220 sound-dai = <&frddr_b> 220 sound-dai = <&frddr_b>;
221 }; 221 };
222 222
223 dai-link-2 { 223 dai-link-2 {
224 sound-dai = <&frddr_c> 224 sound-dai = <&frddr_c>;
225 }; 225 };
226 226
227 dai-link-3 { 227 dai-link-3 {
228 sound-dai = <&toddr_a> 228 sound-dai = <&toddr_a>;
229 }; 229 };
230 230
231 dai-link-4 { 231 dai-link-4 {
232 sound-dai = <&toddr_b> 232 sound-dai = <&toddr_b>;
233 }; 233 };
234 234
235 dai-link-5 { 235 dai-link-5 {
236 sound-dai = <&toddr_c> 236 sound-dai = <&toddr_c>;
237 }; 237 };
238 238
239 /* 239 /*
240 * Audio setup: The 40 pins he 240 * Audio setup: The 40 pins header provides access to 2 TDMs,
241 * SPDIF In/Out and PDM inputs 241 * SPDIF In/Out and PDM inputs.
242 * - TDM A: 2 lanes 242 * - TDM A: 2 lanes
243 * D0: 40/X9 243 * D0: 40/X9
244 * D1: 38/X8 244 * D1: 38/X8
245 * BCLK: 12/X11 245 * BCLK: 12/X11
246 * FS: 35/X10 246 * FS: 35/X10
247 * - TDM B: 4 lanes 247 * - TDM B: 4 lanes
248 * D0: 37/A3 248 * D0: 37/A3
249 * D1: 16/A4 249 * D1: 16/A4
250 * D2: 18/A5 or 7/AO6 250 * D2: 18/A5 or 7/AO6
251 * D3: 22/A6 or 21/H5 251 * D3: 22/A6 or 21/H5
252 * BCLK: 29/A1 or 8/AO8 252 * BCLK: 29/A1 or 8/AO8
253 * FS: 31/A2 or 11/AO7 253 * FS: 31/A2 or 11/AO7
254 * - 2 Master Clocks: 254 * - 2 Master Clocks:
255 * MCLK0: 15/A0 or 10/AO9 255 * MCLK0: 15/A0 or 10/AO9
256 * MCLK1: 33/X15 256 * MCLK1: 33/X15
257 * - SPDIF: 257 * - SPDIF:
258 * OUT: 32/A11 258 * OUT: 32/A11
259 * IN: 21/H5 259 * IN: 21/H5
260 * - PDM Input: 260 * - PDM Input:
261 * DO: 13/A8 261 * DO: 13/A8
262 * D1: 26/A9 262 * D1: 26/A9
263 * D2: 22/A6 263 * D2: 22/A6
264 * D3: 18/A5 264 * D3: 18/A5
265 * DCLK: 36/A7 265 * DCLK: 36/A7
266 * 266 *
267 * TDM C is not usable on the 267 * TDM C is not usable on the 40 pins connector so it is
268 * setup for the HDMI 4 lanes 268 * setup for the HDMI 4 lanes i2s.
269 * 269 *
270 * No pinctrl is enabled by de 270 * No pinctrl is enabled by default to preserve the
271 * genericity of the 40 pins h 271 * genericity of the 40 pins header. Many configurations are
272 * possible based on the desir 272 * possible based on the desired use case. Please adjust TDM
273 * masks, clock setups and pin 273 * masks, clock setups and pinctrl accordingly.
274 */ 274 */
275 275
276 dai-link-6 { 276 dai-link-6 {
277 sound-dai = <&tdmif_a> 277 sound-dai = <&tdmif_a>;
278 dai-format = "dsp_a"; 278 dai-format = "dsp_a";
279 dai-tdm-slot-tx-mask-0 279 dai-tdm-slot-tx-mask-0 = <1 1>;
280 mclk-fs = <256>; 280 mclk-fs = <256>;
281 281
282 codec-0 { 282 codec-0 {
283 sound-dai = <& 283 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
284 }; 284 };
285 285
286 codec-1 { 286 codec-1 {
287 sound-dai = <& 287 sound-dai = <&toacodec TOACODEC_IN_A>;
288 }; 288 };
289 }; 289 };
290 290
291 dai-link-7 { 291 dai-link-7 {
292 sound-dai = <&tdmif_b> 292 sound-dai = <&tdmif_b>;
293 dai-format = "i2s"; 293 dai-format = "i2s";
294 dai-tdm-slot-tx-mask-0 294 dai-tdm-slot-tx-mask-0 = <1 1>;
295 dai-tdm-slot-rx-mask-1 295 dai-tdm-slot-rx-mask-1 = <1 1>;
296 mclk-fs = <256>; 296 mclk-fs = <256>;
297 297
298 codec-0 { 298 codec-0 {
299 sound-dai = <& 299 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
300 }; 300 };
301 301
302 codec-1 { 302 codec-1 {
303 sound-dai = <& 303 sound-dai = <&toacodec TOACODEC_IN_B>;
304 }; 304 };
305 }; 305 };
306 306
307 dai-link-8 { 307 dai-link-8 {
308 sound-dai = <&tdmif_c> 308 sound-dai = <&tdmif_c>;
309 dai-format = "i2s"; 309 dai-format = "i2s";
310 dai-tdm-slot-tx-mask-0 310 dai-tdm-slot-tx-mask-0 = <1 1>;
311 dai-tdm-slot-tx-mask-1 311 dai-tdm-slot-tx-mask-1 = <1 1>;
312 dai-tdm-slot-tx-mask-2 312 dai-tdm-slot-tx-mask-2 = <1 1>;
313 dai-tdm-slot-tx-mask-3 313 dai-tdm-slot-tx-mask-3 = <1 1>;
314 mclk-fs = <256>; 314 mclk-fs = <256>;
315 315
316 codec-0 { 316 codec-0 {
317 sound-dai = <& 317 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
318 }; 318 };
319 319
320 codec-1 { 320 codec-1 {
321 sound-dai = <& 321 sound-dai = <&toacodec TOACODEC_IN_C>;
322 }; 322 };
323 }; 323 };
324 324
325 dai-link-9 { 325 dai-link-9 {
326 sound-dai = <&tohdmitx 326 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
327 327
328 codec { 328 codec {
329 sound-dai = <& 329 sound-dai = <&hdmi_tx>;
330 }; 330 };
331 }; 331 };
332 332
333 dai-link-10 { 333 dai-link-10 {
334 sound-dai = <&toacodec 334 sound-dai = <&toacodec TOACODEC_OUT>;
335 335
336 codec { 336 codec {
337 sound-dai = <& 337 sound-dai = <&acodec>;
338 }; 338 };
339 }; 339 };
340 }; 340 };
341 }; 341 };
342 342
343 &acodec { 343 &acodec {
344 status = "okay"; 344 status = "okay";
345 AVDD-supply = <&vddio_ao18>; 345 AVDD-supply = <&vddio_ao18>;
346 }; 346 };
347 347
348 &arb { 348 &arb {
349 status = "okay"; 349 status = "okay";
350 }; 350 };
351 351
352 &cecb_AO { 352 &cecb_AO {
353 status = "okay"; 353 status = "okay";
354 pinctrl-0 = <&cec_ao_b_h_pins>; 354 pinctrl-0 = <&cec_ao_b_h_pins>;
355 pinctrl-names = "default"; 355 pinctrl-names = "default";
356 hdmi-phandle = <&hdmi_tx>; 356 hdmi-phandle = <&hdmi_tx>;
357 }; 357 };
358 358
359 &clkc_audio { 359 &clkc_audio {
360 status = "okay"; 360 status = "okay";
361 }; 361 };
362 362
363 &cvbs_vdac_port { 363 &cvbs_vdac_port {
364 cvbs_vdac_out: endpoint { 364 cvbs_vdac_out: endpoint {
365 remote-endpoint = <&cvbs_conne 365 remote-endpoint = <&cvbs_connector_in>;
366 }; 366 };
367 }; 367 };
368 368
369 &dwc3 { 369 &dwc3 {
370 #address-cells = <1>; 370 #address-cells = <1>;
371 #size-cells = <0>; 371 #size-cells = <0>;
372 372
373 hub: hub@1 { 373 hub: hub@1 {
374 compatible = "usb5e3,626"; 374 compatible = "usb5e3,626";
375 reg = <1>; 375 reg = <1>;
376 reset-gpios = <&gpio GPIOC_7 ( 376 reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
377 vdd-supply = <&vcc_5v>; 377 vdd-supply = <&vcc_5v>;
378 }; 378 };
379 }; 379 };
380 380
381 ðmac { 381 ðmac {
382 pinctrl-0 = <ð_pins>, <ð_rgmii_p 382 pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>;
383 pinctrl-names = "default"; 383 pinctrl-names = "default";
384 status = "okay"; 384 status = "okay";
385 phy-mode = "rgmii"; 385 phy-mode = "rgmii";
386 phy-handle = <&external_phy>; 386 phy-handle = <&external_phy>;
387 amlogic,tx-delay-ns = <2>; 387 amlogic,tx-delay-ns = <2>;
388 }; 388 };
389 389
390 &ext_mdio { 390 &ext_mdio {
391 external_phy: ethernet-phy@0 { 391 external_phy: ethernet-phy@0 {
392 /* Realtek RTL8211F (0x001cc91 392 /* Realtek RTL8211F (0x001cc916) */
393 reg = <0>; 393 reg = <0>;
394 max-speed = <1000>; 394 max-speed = <1000>;
395 395
396 reset-assert-us = <100000>; 396 reset-assert-us = <100000>;
397 reset-deassert-us = <100000>; 397 reset-deassert-us = <100000>;
398 reset-gpios = <&gpio GPIOZ_15 398 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
399 399
400 interrupt-parent = <&gpio_intc 400 interrupt-parent = <&gpio_intc>;
401 /* MAC_INTR on GPIOZ_14 */ 401 /* MAC_INTR on GPIOZ_14 */
402 interrupts = <26 IRQ_TYPE_LEVE 402 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
403 }; 403 };
404 }; 404 };
405 405
406 &frddr_a { 406 &frddr_a {
407 status = "okay"; 407 status = "okay";
408 }; 408 };
409 409
410 &frddr_b { 410 &frddr_b {
411 status = "okay"; 411 status = "okay";
412 }; 412 };
413 413
414 &frddr_c { 414 &frddr_c {
415 status = "okay"; 415 status = "okay";
416 }; 416 };
417 417
418 &hdmi_tx { 418 &hdmi_tx {
419 status = "okay"; 419 status = "okay";
420 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmi 420 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
421 pinctrl-names = "default"; 421 pinctrl-names = "default";
422 hdmi-supply = <&vcc_5v>; 422 hdmi-supply = <&vcc_5v>;
423 }; 423 };
424 424
425 &hdmi_tx_tmds_port { 425 &hdmi_tx_tmds_port {
426 hdmi_tx_tmds_out: endpoint { 426 hdmi_tx_tmds_out: endpoint {
427 remote-endpoint = <&hdmi_conne 427 remote-endpoint = <&hdmi_connector_in>;
428 }; 428 };
429 }; 429 };
430 430
431 &ir { 431 &ir {
432 status = "okay"; 432 status = "okay";
433 pinctrl-0 = <&remote_input_ao_pins>; 433 pinctrl-0 = <&remote_input_ao_pins>;
434 pinctrl-names = "default"; 434 pinctrl-names = "default";
435 }; 435 };
436 436
437 &periphs_pinctrl { 437 &periphs_pinctrl {
438 spi_cs_disable_pins: spi-cs-disable { 438 spi_cs_disable_pins: spi-cs-disable {
439 mux { 439 mux {
440 groups = "BOOT_14"; 440 groups = "BOOT_14";
441 function = "gpio_perip 441 function = "gpio_periphs";
442 bias-disable; 442 bias-disable;
443 output-high; 443 output-high;
444 }; 444 };
445 }; 445 };
446 446
447 eth_phy_irq_pins: eth-phy-irq { 447 eth_phy_irq_pins: eth-phy-irq {
448 mux { 448 mux {
449 groups = "GPIOZ_14"; 449 groups = "GPIOZ_14";
450 function = "gpio_perip 450 function = "gpio_periphs";
451 bias-pull-up; 451 bias-pull-up;
452 output-disable; 452 output-disable;
453 }; 453 };
454 }; 454 };
455 }; 455 };
456 456
457 &pwm_AO_cd { 457 &pwm_AO_cd {
458 status = "okay"; 458 status = "okay";
459 pinctrl-0 = <&pwm_ao_d_e_pins>; 459 pinctrl-0 = <&pwm_ao_d_e_pins>;
460 pinctrl-names = "default"; 460 pinctrl-names = "default";
461 clocks = <&xtal>; 461 clocks = <&xtal>;
462 clock-names = "clkin1"; 462 clock-names = "clkin1";
463 }; 463 };
464 464
465 &pwm_ab { 465 &pwm_ab {
466 status = "okay"; 466 status = "okay";
467 pinctrl-0 = <&pwm_b_x7_pins>; 467 pinctrl-0 = <&pwm_b_x7_pins>;
468 pinctrl-names = "default"; 468 pinctrl-names = "default";
469 clocks = <&xtal>; 469 clocks = <&xtal>;
470 clock-names = "clkin1"; 470 clock-names = "clkin1";
471 }; 471 };
472 472
473 &pwm_cd { 473 &pwm_cd {
474 status = "okay"; 474 status = "okay";
475 pinctrl-0 = <&pwm_d_x3_pins>; 475 pinctrl-0 = <&pwm_d_x3_pins>;
476 pinctrl-names = "default"; 476 pinctrl-names = "default";
477 clocks = <&xtal>; 477 clocks = <&xtal>;
478 clock-names = "clkin1"; 478 clock-names = "clkin1";
479 }; 479 };
480 480
481 &saradc { 481 &saradc {
482 status = "okay"; 482 status = "okay";
483 vref-supply = <&vddio_ao18>; 483 vref-supply = <&vddio_ao18>;
484 }; 484 };
485 485
486 /* SD card */ 486 /* SD card */
487 &sd_emmc_b { 487 &sd_emmc_b {
488 status = "okay"; 488 status = "okay";
489 pinctrl-0 = <&sdcard_c_pins>; 489 pinctrl-0 = <&sdcard_c_pins>;
490 pinctrl-1 = <&sdcard_clk_gate_c_pins>; 490 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
491 pinctrl-names = "default", "clk-gate"; 491 pinctrl-names = "default", "clk-gate";
492 492
493 bus-width = <4>; 493 bus-width = <4>;
494 cap-sd-highspeed; 494 cap-sd-highspeed;
495 sd-uhs-sdr12; 495 sd-uhs-sdr12;
496 sd-uhs-sdr25; 496 sd-uhs-sdr25;
497 sd-uhs-sdr50; 497 sd-uhs-sdr50;
498 sd-uhs-sdr104; 498 sd-uhs-sdr104;
499 max-frequency = <200000000>; 499 max-frequency = <200000000>;
500 disable-wp; 500 disable-wp;
501 501
502 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_ 502 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
503 vmmc-supply = <&vcc_card>; 503 vmmc-supply = <&vcc_card>;
504 vqmmc-supply = <&vddio_c>; 504 vqmmc-supply = <&vddio_c>;
505 }; 505 };
506 506
507 /* 507 /*
508 * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins 508 * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
509 * and eMMC Data 4 to 7 pins. 509 * and eMMC Data 4 to 7 pins.
510 * Replace emmc_data_8b_pins to emmc_data_4b_p 510 * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
511 * and change bus-width to 4 then spifc can be 511 * and change bus-width to 4 then spifc can be enabled.
512 */ 512 */
513 &sd_emmc_c { 513 &sd_emmc_c {
514 status = "okay"; 514 status = "okay";
515 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_ 515 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>,
516 <&spi_cs_disable_pins>; 516 <&spi_cs_disable_pins>;
517 pinctrl-1 = <&emmc_clk_gate_pins>; 517 pinctrl-1 = <&emmc_clk_gate_pins>;
518 pinctrl-names = "default", "clk-gate"; 518 pinctrl-names = "default", "clk-gate";
519 519
520 bus-width = <8>; 520 bus-width = <8>;
521 cap-mmc-highspeed; 521 cap-mmc-highspeed;
522 mmc-hs200-1_8v; 522 mmc-hs200-1_8v;
523 max-frequency = <200000000>; 523 max-frequency = <200000000>;
524 disable-wp; 524 disable-wp;
525 525
526 mmc-pwrseq = <&emmc_pwrseq>; 526 mmc-pwrseq = <&emmc_pwrseq>;
527 vmmc-supply = <&vcc_3v3>; 527 vmmc-supply = <&vcc_3v3>;
528 vqmmc-supply = <&flash_1v8>; 528 vqmmc-supply = <&flash_1v8>;
529 }; 529 };
530 530
531 &spifc { 531 &spifc {
532 status = "disabled"; 532 status = "disabled";
533 pinctrl-0 = <&nor_pins>; 533 pinctrl-0 = <&nor_pins>;
534 pinctrl-names = "default"; 534 pinctrl-names = "default";
535 cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_ 535 cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>;
536 536
537 w25lq128d: flash@0 { 537 w25lq128d: flash@0 {
538 compatible = "jedec,spi-nor"; 538 compatible = "jedec,spi-nor";
539 reg = <0>; 539 reg = <0>;
540 #address-cells = <1>; 540 #address-cells = <1>;
541 #size-cells = <1>; 541 #size-cells = <1>;
542 spi-max-frequency = <80000000> 542 spi-max-frequency = <80000000>;
543 }; 543 };
544 }; 544 };
545 545
546 &tdmif_a { 546 &tdmif_a {
547 status = "okay"; 547 status = "okay";
548 }; 548 };
549 549
550 &tdmif_b { 550 &tdmif_b {
551 status = "okay"; 551 status = "okay";
552 }; 552 };
553 553
554 &tdmif_c { 554 &tdmif_c {
555 status = "okay"; 555 status = "okay";
556 }; 556 };
557 557
558 &tdmin_a { 558 &tdmin_a {
559 status = "okay"; 559 status = "okay";
560 }; 560 };
561 561
562 &tdmin_b { 562 &tdmin_b {
563 status = "okay"; 563 status = "okay";
564 }; 564 };
565 565
566 &tdmin_c { 566 &tdmin_c {
567 status = "okay"; 567 status = "okay";
568 }; 568 };
569 569
570 &tdmout_a { 570 &tdmout_a {
571 status = "okay"; 571 status = "okay";
572 }; 572 };
573 573
574 &tdmout_b { 574 &tdmout_b {
575 status = "okay"; 575 status = "okay";
576 }; 576 };
577 577
578 &tdmout_c { 578 &tdmout_c {
579 status = "okay"; 579 status = "okay";
580 }; 580 };
581 581
582 &toacodec { 582 &toacodec {
583 status = "okay"; 583 status = "okay";
584 }; 584 };
585 585
586 &toddr_a { 586 &toddr_a {
587 status = "okay"; 587 status = "okay";
588 }; 588 };
589 589
590 &toddr_b { 590 &toddr_b {
591 status = "okay"; 591 status = "okay";
592 }; 592 };
593 593
594 &toddr_c { 594 &toddr_c {
595 status = "okay"; 595 status = "okay";
596 }; 596 };
597 597
598 &tohdmitx { 598 &tohdmitx {
599 status = "okay"; 599 status = "okay";
600 }; 600 };
601 601
602 &uart_AO { 602 &uart_AO {
603 status = "okay"; 603 status = "okay";
604 pinctrl-0 = <&uart_ao_a_pins>; 604 pinctrl-0 = <&uart_ao_a_pins>;
605 pinctrl-names = "default"; 605 pinctrl-names = "default";
606 }; 606 };
607 607
608 &usb2_phy1 { 608 &usb2_phy1 {
609 phy-supply = <&dc_in>; 609 phy-supply = <&dc_in>;
610 }; 610 };
611 611
612 &usb3_pcie_phy { 612 &usb3_pcie_phy {
613 phy-supply = <&vcc_5v>; 613 phy-supply = <&vcc_5v>;
614 }; 614 };
615 615
616 &usb { 616 &usb {
617 status = "okay"; 617 status = "okay";
618 }; 618 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.