1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2019 BayLibre SAS. All rights
4 */
5
6 /dts-v1/;
7
8 #include "meson-sm1.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/gpio/meson-g12a-gpio.h>
12 #include <dt-bindings/sound/meson-g12a-tohdmit
13
14 / {
15 compatible = "seirobotics,sei610", "am
16 model = "SEI Robotics SEI610";
17
18 aliases {
19 serial0 = &uart_AO;
20 ethernet0 = ðmac;
21 };
22
23 mono_dac: audio-codec-0 {
24 compatible = "maxim,max98357a"
25 #sound-dai-cells = <0>;
26 sound-name-prefix = "U16";
27 sdmode-gpios = <&gpio GPIOX_8
28 };
29
30 dmics: audio-codec-1 {
31 #sound-dai-cells = <0>;
32 compatible = "dmic-codec";
33 num-channels = <2>;
34 wakeup-delay-ms = <50>;
35 sound-name-prefix = "MIC";
36 };
37
38 chosen {
39 stdout-path = "serial0:115200n
40 };
41
42 emmc_pwrseq: emmc-pwrseq {
43 compatible = "mmc-pwrseq-emmc"
44 reset-gpios = <&gpio BOOT_12 G
45 };
46
47 gpio-keys {
48 compatible = "gpio-keys";
49
50 key-1 {
51 label = "A";
52 linux,code = <BTN_0>;
53 gpios = <&gpio GPIOH_6
54 interrupt-parent = <&g
55 interrupts = <IRQID_GP
56 };
57
58 key-2 {
59 label = "B";
60 linux,code = <BTN_1>;
61 gpios = <&gpio GPIOH_7
62 interrupt-parent = <&g
63 interrupts = <IRQID_GP
64 };
65
66 key-3 {
67 label = "C";
68 linux,code = <BTN_2>;
69 gpios = <&gpio_ao GPIO
70 interrupt-parent = <&g
71 interrupts = <IRQID_GP
72 };
73
74 key-mic-mute {
75 label = "MicMute";
76 linux,code = <SW_MUTE_
77 linux,input-type = <EV
78 gpios = <&gpio_ao GPIO
79 interrupt-parent = <&g
80 interrupts = <IRQID_GP
81 };
82
83 key-power {
84 label = "PowerKey";
85 linux,code = <KEY_POWE
86 gpios = <&gpio_ao GPIO
87 interrupt-parent = <&g
88 interrupts = <IRQID_GP
89 };
90 };
91
92 hdmi-connector {
93 compatible = "hdmi-connector";
94 type = "a";
95
96 port {
97 hdmi_connector_in: end
98 remote-endpoin
99 };
100 };
101 };
102
103 led-controller-1 {
104 compatible = "gpio-leds";
105
106 led-1 {
107 label = "sei610:blue:b
108 gpios = <&gpio GPIOC_7
109 default-state = "off";
110 };
111 };
112
113 led-controller-2 {
114 compatible = "pwm-leds";
115
116 led-2 {
117 label = "sei610:red:po
118 pwms = <&pwm_AO_ab 0 3
119 max-brightness = <255>
120 linux,default-trigger
121 active-low;
122 };
123 };
124
125 memory@0 {
126 device_type = "memory";
127 reg = <0x0 0x0 0x0 0x40000000>
128 };
129
130 ao_5v: regulator-ao-5v {
131 compatible = "regulator-fixed"
132 regulator-name = "AO_5V";
133 regulator-min-microvolt = <500
134 regulator-max-microvolt = <500
135 vin-supply = <&dc_in>;
136 regulator-always-on;
137 };
138
139 dc_in: regulator-dc-in {
140 compatible = "regulator-fixed"
141 regulator-name = "DC_IN";
142 regulator-min-microvolt = <500
143 regulator-max-microvolt = <500
144 regulator-always-on;
145 };
146
147 emmc_1v8: regulator-emmc-1v8 {
148 compatible = "regulator-fixed"
149 regulator-name = "EMMC_1V8";
150 regulator-min-microvolt = <180
151 regulator-max-microvolt = <180
152 vin-supply = <&vddao_3v3>;
153 regulator-always-on;
154 };
155
156 vddao_3v3: regulator-vddao-3v3 {
157 compatible = "regulator-fixed"
158 regulator-name = "VDDAO_3V3";
159 regulator-min-microvolt = <330
160 regulator-max-microvolt = <330
161 vin-supply = <&dc_in>;
162 regulator-always-on;
163 };
164
165 /* Used by Tuner, RGB Led & IR Emitter
166 vddao_3v3_t: regulator-vddao-3v3-t {
167 compatible = "regulator-fixed"
168 regulator-name = "VDDAO_3V3_T"
169 regulator-min-microvolt = <330
170 regulator-max-microvolt = <330
171 vin-supply = <&vddao_3v3>;
172 gpio = <&gpio GPIOH_8 GPIO_OPE
173 regulator-always-on;
174 };
175
176 vddcpu: regulator-vddcpu {
177 /*
178 * SY8120B1ABC DC/DC Regulator
179 */
180 compatible = "pwm-regulator";
181
182 regulator-name = "VDDCPU";
183 regulator-min-microvolt = <690
184 regulator-max-microvolt = <105
185
186 pwm-supply = <&dc_in>;
187
188 pwms = <&pwm_AO_cd 1 1500 0>;
189 pwm-dutycycle-range = <100 0>;
190
191 regulator-boot-on;
192 regulator-always-on;
193 };
194
195 vddio_ao1v8: regulator-vddio-ao1v8 {
196 compatible = "regulator-fixed"
197 regulator-name = "VDDIO_AO1V8"
198 regulator-min-microvolt = <180
199 regulator-max-microvolt = <180
200 vin-supply = <&vddao_3v3>;
201 regulator-always-on;
202 };
203
204 sdio_pwrseq: sdio-pwrseq {
205 compatible = "mmc-pwrseq-simpl
206 reset-gpios = <&gpio GPIOX_6 G
207 clocks = <&wifi32k>;
208 clock-names = "ext_clock";
209 };
210
211 sound {
212 compatible = "amlogic,axg-soun
213 model = "SEI610";
214 audio-aux-devs = <&tdmout_a>,
215 <&tdmin_a>, <
216 audio-routing = "TDMOUT_A IN 0
217 "TDMOUT_A IN 1
218 "TDMOUT_A IN 2
219 "TDM_A Playbac
220 "TDMOUT_B IN 0
221 "TDMOUT_B IN 1
222 "TDMOUT_B IN 2
223 "TDM_B Playbac
224 "TODDR_A IN 4"
225 "TODDR_B IN 4"
226 "TODDR_C IN 4"
227 "TDMIN_A IN 0"
228 "TDMIN_A IN 3"
229 "TDMIN_B IN 0"
230 "TDMIN_B IN 3"
231 "TDMIN_A IN 1"
232 "TDMIN_A IN 4"
233 "TDMIN_B IN 1"
234 "TDMIN_B IN 4"
235 "TODDR_A IN 0"
236 "TODDR_B IN 0"
237 "TODDR_C IN 0"
238 "TODDR_A IN 1"
239 "TODDR_B IN 1"
240 "TODDR_C IN 1"
241
242 clocks = <&clkc CLKID_MPLL2>,
243 <&clkc CLKID_MPLL0>,
244 <&clkc CLKID_MPLL1>;
245
246 assigned-clocks = <&clkc CLKID
247 <&clkc CLKID
248 <&clkc CLKID
249 assigned-clock-parents = <0>,
250 assigned-clock-rates = <294912
251 <270950
252 <393216
253
254 dai-link-0 {
255 sound-dai = <&frddr_a>
256 };
257
258 dai-link-1 {
259 sound-dai = <&frddr_b>
260 };
261
262 dai-link-2 {
263 sound-dai = <&frddr_c>
264 };
265
266 dai-link-3 {
267 sound-dai = <&toddr_a>
268 };
269
270 dai-link-4 {
271 sound-dai = <&toddr_b>
272 };
273
274 dai-link-5 {
275 sound-dai = <&toddr_c>
276 };
277
278 /* internal speaker interface
279 dai-link-6 {
280 sound-dai = <&tdmif_a>
281 dai-format = "i2s";
282 dai-tdm-slot-tx-mask-0
283 mclk-fs = <256>;
284
285 codec-0 {
286 sound-dai = <&
287 };
288
289 codec-1 {
290 sound-dai = <&
291 };
292 };
293
294 /* 8ch hdmi interface */
295 dai-link-7 {
296 sound-dai = <&tdmif_b>
297 dai-format = "i2s";
298 dai-tdm-slot-tx-mask-0
299 dai-tdm-slot-tx-mask-1
300 dai-tdm-slot-tx-mask-2
301 dai-tdm-slot-tx-mask-3
302 mclk-fs = <256>;
303
304 codec {
305 sound-dai = <&
306 };
307 };
308
309 /* internal digital mics */
310 dai-link-8 {
311 sound-dai = <&pdm>;
312
313 codec {
314 sound-dai = <&
315 };
316 };
317
318 /* hdmi glue */
319 dai-link-9 {
320 sound-dai = <&tohdmitx
321
322 codec {
323 sound-dai = <&
324 };
325 };
326 };
327
328 wifi32k: wifi32k {
329 compatible = "pwm-clock";
330 #clock-cells = <0>;
331 clock-frequency = <32768>;
332 pwms = <&pwm_ef 0 30518 0>; /*
333 };
334 };
335
336 &arb {
337 status = "okay";
338 };
339
340 &cec_AO {
341 pinctrl-0 = <&cec_ao_a_h_pins>;
342 pinctrl-names = "default";
343 status = "disabled";
344 hdmi-phandle = <&hdmi_tx>;
345 };
346
347 &cecb_AO {
348 pinctrl-0 = <&cec_ao_b_h_pins>;
349 pinctrl-names = "default";
350 status = "okay";
351 hdmi-phandle = <&hdmi_tx>;
352 };
353
354 &clkc_audio {
355 status = "okay";
356 };
357
358 &cpu0 {
359 cpu-supply = <&vddcpu>;
360 operating-points-v2 = <&cpu_opp_table>
361 clocks = <&clkc CLKID_CPU_CLK>;
362 clock-latency = <50000>;
363 };
364
365 &cpu1 {
366 cpu-supply = <&vddcpu>;
367 operating-points-v2 = <&cpu_opp_table>
368 clocks = <&clkc CLKID_CPU1_CLK>;
369 clock-latency = <50000>;
370 };
371
372 &cpu2 {
373 cpu-supply = <&vddcpu>;
374 operating-points-v2 = <&cpu_opp_table>
375 clocks = <&clkc CLKID_CPU2_CLK>;
376 clock-latency = <50000>;
377 };
378
379 &cpu3 {
380 cpu-supply = <&vddcpu>;
381 operating-points-v2 = <&cpu_opp_table>
382 clocks = <&clkc CLKID_CPU3_CLK>;
383 clock-latency = <50000>;
384 };
385
386 ðmac {
387 status = "okay";
388 phy-handle = <&internal_ephy>;
389 phy-mode = "rmii";
390 };
391
392 &frddr_a {
393 status = "okay";
394 };
395
396 &frddr_b {
397 status = "okay";
398 };
399
400 &frddr_c {
401 status = "okay";
402 };
403
404 &hdmi_tx {
405 status = "okay";
406 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmi
407 pinctrl-names = "default";
408 };
409
410 &hdmi_tx_tmds_port {
411 hdmi_tx_tmds_out: endpoint {
412 remote-endpoint = <&hdmi_conne
413 };
414 };
415
416 &i2c3 {
417 status = "okay";
418 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3
419 pinctrl-names = "default";
420 };
421
422 &ir {
423 status = "okay";
424 pinctrl-0 = <&remote_input_ao_pins>;
425 pinctrl-names = "default";
426 };
427
428 &pdm {
429 pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_
430 pinctrl-names = "default";
431 status = "okay";
432 };
433
434 &pwm_AO_ab {
435 status = "okay";
436 pinctrl-0 = <&pwm_ao_a_pins>;
437 pinctrl-names = "default";
438 clocks = <&xtal>;
439 clock-names = "clkin0";
440 };
441
442 &pwm_AO_cd {
443 pinctrl-0 = <&pwm_ao_d_e_pins>;
444 pinctrl-names = "default";
445 clocks = <&xtal>;
446 clock-names = "clkin1";
447 status = "okay";
448 };
449
450 &pwm_ef {
451 status = "okay";
452 pinctrl-0 = <&pwm_e_pins>;
453 pinctrl-names = "default";
454 clocks = <&xtal>;
455 clock-names = "clkin0";
456 };
457
458 &saradc {
459 status = "okay";
460 vref-supply = <&vddio_ao1v8>;
461 };
462
463 /* SDIO */
464 &sd_emmc_a {
465 status = "okay";
466 pinctrl-0 = <&sdio_pins>;
467 pinctrl-1 = <&sdio_clk_gate_pins>;
468 pinctrl-names = "default", "clk-gate";
469 #address-cells = <1>;
470 #size-cells = <0>;
471
472 bus-width = <4>;
473 cap-sd-highspeed;
474 sd-uhs-sdr50;
475 max-frequency = <100000000>;
476
477 non-removable;
478 disable-wp;
479
480 /* WiFi firmware requires power to be
481 keep-power-in-suspend;
482
483 mmc-pwrseq = <&sdio_pwrseq>;
484
485 vmmc-supply = <&vddao_3v3>;
486 vqmmc-supply = <&vddio_ao1v8>;
487
488 brcmf: wifi@1 {
489 reg = <1>;
490 compatible = "brcm,bcm4329-fma
491 };
492 };
493
494 /* SD card */
495 &sd_emmc_b {
496 status = "okay";
497 pinctrl-0 = <&sdcard_c_pins>;
498 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
499 pinctrl-names = "default", "clk-gate";
500
501 bus-width = <4>;
502 cap-sd-highspeed;
503 max-frequency = <50000000>;
504 disable-wp;
505
506 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_
507 vmmc-supply = <&vddao_3v3>;
508 vqmmc-supply = <&vddao_3v3>;
509 };
510
511 /* eMMC */
512 &sd_emmc_c {
513 status = "okay";
514 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_
515 pinctrl-1 = <&emmc_clk_gate_pins>;
516 pinctrl-names = "default", "clk-gate";
517
518 bus-width = <8>;
519 cap-mmc-highspeed;
520 mmc-ddr-1_8v;
521 mmc-hs200-1_8v;
522 max-frequency = <200000000>;
523 non-removable;
524 disable-wp;
525
526 mmc-pwrseq = <&emmc_pwrseq>;
527 vmmc-supply = <&vddao_3v3>;
528 vqmmc-supply = <&emmc_1v8>;
529 };
530
531 &tdmif_a {
532 pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm
533 pinctrl-names = "default";
534 status = "okay";
535
536 assigned-clocks = <&clkc_audio AUD_CLK
537 <&clkc_audio AUD_CLK
538 assigned-clock-parents = <&clkc_audio
539 <&clkc_audio
540 assigned-clock-rates = <0>, <0>;
541 };
542
543 &tdmif_b {
544 status = "okay";
545 };
546
547 &tdmin_a {
548 status = "okay";
549 };
550
551 &tdmin_b {
552 status = "okay";
553 };
554
555 &tdmout_a {
556 status = "okay";
557 };
558
559 &tdmout_b {
560 status = "okay";
561 };
562
563 &toddr_a {
564 status = "okay";
565 };
566
567 &toddr_b {
568 status = "okay";
569 };
570
571 &toddr_c {
572 status = "okay";
573 };
574
575 &tohdmitx {
576 status = "okay";
577 };
578
579 &uart_A {
580 status = "okay";
581 pinctrl-0 = <&uart_a_pins>, <&uart_a_c
582 pinctrl-names = "default";
583 uart-has-rtscts;
584
585 bluetooth {
586 compatible = "brcm,bcm43438-bt
587 interrupt-parent = <&gpio_intc
588 interrupts = <IRQID_GPIOX_18 I
589 interrupt-names = "host-wakeup
590 shutdown-gpios = <&gpio GPIOX_
591 max-speed = <2000000>;
592 clocks = <&wifi32k>;
593 clock-names = "lpo";
594 vbat-supply = <&vddao_3v3>;
595 vddio-supply = <&vddio_ao1v8>;
596 };
597 };
598
599 /* Exposed via the on-board USB to Serial FT23
600 &uart_AO {
601 status = "okay";
602 pinctrl-0 = <&uart_ao_a_pins>;
603 pinctrl-names = "default";
604 };
605
606 &usb {
607 status = "okay";
608 dr_mode = "otg";
609 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.