1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (c) 2019 Linaro Ltd. 3 * Copyright (c) 2019 Linaro Ltd.
4 * Author: Manivannan Sadhasivam <manivannan.sa 4 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
5 */ 5 */
6 6
7 /dts-v1/; 7 /dts-v1/;
8 8
9 #include "bm1880.dtsi" 9 #include "bm1880.dtsi"
10 10
11 /* 11 /*
12 * GPIO name legend: proper name = the GPIO li 12 * GPIO name legend: proper name = the GPIO line is used as GPIO
13 * NC = not connected (pin out but not 13 * NC = not connected (pin out but not routed from the chip to
14 * anything the board) 14 * anything the board)
15 * "[PER]" = pin is muxed for [periphe 15 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
16 * LSEC = Low Speed External Connector 16 * LSEC = Low Speed External Connector
17 * HSEC = High Speed External Connecto 17 * HSEC = High Speed External Connector
18 * 18 *
19 * Line names are taken from the schematic "so 19 * Line names are taken from the schematic "sophon-edge-schematics"
20 * version, 1.0210. 20 * version, 1.0210.
21 * 21 *
22 * For the lines routed to the external connec 22 * For the lines routed to the external connectors the
23 * lines are named after the 96Boards CE Speci 23 * lines are named after the 96Boards CE Specification 1.0,
24 * Appendix "Expansion Connector Signal Descri 24 * Appendix "Expansion Connector Signal Description".
25 * 25 *
26 * When the 96Board naming of a line and the s 26 * When the 96Board naming of a line and the schematic name of
27 * the same line are in conflict, the 96Board 27 * the same line are in conflict, the 96Board specification
28 * takes precedence. This is only for the info 28 * takes precedence. This is only for the informational
29 * lines i.e. "[FOO]", the GPIO named lines "G 29 * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
30 * are the only ones actually used for GPIO. 30 * are the only ones actually used for GPIO.
31 */ 31 */
32 32
33 / { 33 / {
34 compatible = "bitmain,sophon-edge", "b 34 compatible = "bitmain,sophon-edge", "bitmain,bm1880";
35 model = "Sophon Edge"; 35 model = "Sophon Edge";
36 36
37 aliases { 37 aliases {
38 serial0 = &uart0; 38 serial0 = &uart0;
39 serial1 = &uart2; 39 serial1 = &uart2;
40 serial2 = &uart1; 40 serial2 = &uart1;
41 }; 41 };
42 42
43 chosen { 43 chosen {
44 stdout-path = "serial0:115200n 44 stdout-path = "serial0:115200n8";
45 }; 45 };
46 46
47 memory@0 { 47 memory@0 {
48 device_type = "memory"; 48 device_type = "memory";
49 reg = <0x1 0x00000000 0x0 0x40 49 reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
50 }; 50 };
51 51
52 soc { 52 soc {
53 gpio0: gpio@50027000 { 53 gpio0: gpio@50027000 {
54 porta: gpio-controller 54 porta: gpio-controller@0 {
55 gpio-line-name 55 gpio-line-names =
56 "GPIO- 56 "GPIO-A", /* GPIO0, LSEC pin 23 */
57 "GPIO- 57 "GPIO-C", /* GPIO1, LSEC pin 25 */
58 "[GPIO 58 "[GPIO2_PHY0_RST]", /* GPIO2 */
59 "GPIO- 59 "GPIO-E", /* GPIO3, LSEC pin 27 */
60 "[USB_ 60 "[USB_DET]", /* GPIO4 */
61 "[EN_P 61 "[EN_P5V]", /* GPIO5 */
62 "[VDDI 62 "[VDDIO_MS1_SEL]", /* GPIO6 */
63 "GPIO- 63 "GPIO-G", /* GPIO7, LSEC pin 29 */
64 "[BM_T 64 "[BM_TUSB_RST_L]", /* GPIO8 */
65 "[EN_P 65 "[EN_P5V_USBHUB]", /* GPIO9 */
66 "NC", 66 "NC",
67 "LED_W 67 "LED_WIFI", /* GPIO11 */
68 "LED_B 68 "LED_BT", /* GPIO12 */
69 "[BM_B 69 "[BM_BLM8221_EN_L]", /* GPIO13 */
70 "NC", 70 "NC", /* GPIO14 */
71 "NC", 71 "NC", /* GPIO15 */
72 "NC", 72 "NC", /* GPIO16 */
73 "NC", 73 "NC", /* GPIO17 */
74 "NC", 74 "NC", /* GPIO18 */
75 "NC", 75 "NC", /* GPIO19 */
76 "NC", 76 "NC", /* GPIO20 */
77 "NC", 77 "NC", /* GPIO21 */
78 "NC", 78 "NC", /* GPIO22 */
79 "NC", 79 "NC", /* GPIO23 */
80 "NC", 80 "NC", /* GPIO24 */
81 "NC", 81 "NC", /* GPIO25 */
82 "NC", 82 "NC", /* GPIO26 */
83 "NC", 83 "NC", /* GPIO27 */
84 "NC", 84 "NC", /* GPIO28 */
85 "NC", 85 "NC", /* GPIO29 */
86 "NC", 86 "NC", /* GPIO30 */
87 "NC"; 87 "NC"; /* GPIO31 */
88 }; 88 };
89 }; 89 };
90 90
91 gpio1: gpio@50027400 { 91 gpio1: gpio@50027400 {
92 portb: gpio-controller 92 portb: gpio-controller@0 {
93 gpio-line-name 93 gpio-line-names =
94 "NC", 94 "NC", /* GPIO32 */
95 "NC", 95 "NC", /* GPIO33 */
96 "[I2C0 96 "[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
97 "[I2C0 97 "[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
98 "[JTAG 98 "[JTAG0_TDO]", /* GPIO36 */
99 "[JTAG 99 "[JTAG0_TCK]", /* GPIO37 */
100 "[JTAG 100 "[JTAG0_TDI]", /* GPIO38 */
101 "[JTAG 101 "[JTAG0_TMS]", /* GPIO39 */
102 "[JTAG 102 "[JTAG0_TRST_X]", /* GPIO40 */
103 "[JTAG 103 "[JTAG1_TDO]", /* GPIO41 */
104 "[JTAG 104 "[JTAG1_TCK]", /* GPIO42 */
105 "[JTAG 105 "[JTAG1_TDI]", /* GPIO43 */
106 "[CPU_ 106 "[CPU_TX]", /* GPIO44 */
107 "[CPU_ 107 "[CPU_RX]", /* GPIO45 */
108 "[UART 108 "[UART1_TXD]", /* GPIO46 */
109 "[UART 109 "[UART1_RXD]", /* GPIO47 */
110 "[UART 110 "[UART0_TXD]", /* GPIO48 */
111 "[UART 111 "[UART0_RXD]", /* GPIO49 */
112 "GPIO- 112 "GPIO-I", /* GPIO50, LSEC pin 31 */
113 "GPIO- 113 "GPIO-K", /* GPIO51, LSEC pin 33 */
114 "USER_ 114 "USER_LED2", /* GPIO52 */
115 "USER_ 115 "USER_LED1", /* GPIO53 */
116 "[UART 116 "[UART0_RTS]", /* GPIO54 */
117 "[UART 117 "[UART0_CTS]", /* GPIO55 */
118 "USER_ 118 "USER_LED4", /* GPIO56, JTAG1_TRST_X */
119 "USER_ 119 "USER_LED3", /* GPIO57, JTAG1_TMS */
120 "[I2S0 120 "[I2S0_SCLK]", /* GPIO58 */
121 "[I2S0 121 "[I2S0_FS]", /* GPIO59 */
122 "[I2S0 122 "[I2S0_SDI]", /* GPIO60 */
123 "[I2S0 123 "[I2S0_SDO]", /* GPIO61 */
124 "GPIO- 124 "GPIO-B", /* GPIO62, LSEC pin 24 */
125 "GPIO- 125 "GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
126 }; 126 };
127 }; 127 };
128 128
129 gpio2: gpio@50027800 { 129 gpio2: gpio@50027800 {
130 portc: gpio-controller 130 portc: gpio-controller@0 {
131 gpio-line-name 131 gpio-line-names =
132 "GPIO- 132 "GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
133 "GPIO- 133 "GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
134 "GPIO- 134 "GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
135 "GPIO- 135 "GPIO-L", /* GPIO67, LSEC pin 34 */
136 "[SPI0 136 "[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
137 "[SPI0 137 "[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
138 "[SPI0 138 "[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
139 "[SPI0 139 "[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
140 }; 140 };
141 }; 141 };
142 }; 142 };
143 }; 143 };
144 144
145 &pinctrl { 145 &pinctrl {
146 pinctrl_uart0_default: pinctrl-uart0-d 146 pinctrl_uart0_default: pinctrl-uart0-default {
147 pinmux { 147 pinmux {
148 groups = "uart0_grp"; 148 groups = "uart0_grp";
149 function = "uart0"; 149 function = "uart0";
150 }; 150 };
151 }; 151 };
152 152
153 pinctrl_uart1_default: pinctrl-uart1-d 153 pinctrl_uart1_default: pinctrl-uart1-default {
154 pinmux { 154 pinmux {
155 groups = "uart1_grp"; 155 groups = "uart1_grp";
156 function = "uart1"; 156 function = "uart1";
157 }; 157 };
158 }; 158 };
159 159
160 pinctrl_uart2_default: pinctrl-uart2-d 160 pinctrl_uart2_default: pinctrl-uart2-default {
161 pinmux { 161 pinmux {
162 groups = "uart2_grp"; 162 groups = "uart2_grp";
163 function = "uart2"; 163 function = "uart2";
164 }; 164 };
165 }; 165 };
166 }; 166 };
167 167
168 &uart0 { 168 &uart0 {
169 status = "okay"; 169 status = "okay";
170 pinctrl-names = "default"; 170 pinctrl-names = "default";
171 pinctrl-0 = <&pinctrl_uart0_default>; 171 pinctrl-0 = <&pinctrl_uart0_default>;
172 }; 172 };
173 173
174 &uart1 { 174 &uart1 {
175 status = "okay"; 175 status = "okay";
176 pinctrl-names = "default"; 176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_uart1_default>; 177 pinctrl-0 = <&pinctrl_uart1_default>;
178 }; 178 };
179 179
180 &uart2 { 180 &uart2 {
181 status = "okay"; 181 status = "okay";
182 pinctrl-names = "default"; 182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_uart2_default>; 183 pinctrl-0 = <&pinctrl_uart2_default>;
184 }; 184 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.