1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Device Tree Include file for Freescale Laye 3 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
4 * 4 *
5 * Copyright 2014-2015 Freescale Semiconductor 5 * Copyright 2014-2015 Freescale Semiconductor, Inc.
6 * Copyright 2018-2021 NXP !! 6 * Copyright 2018 NXP
7 * 7 *
8 * Mingkai Hu <Mingkai.hu@freescale.com> 8 * Mingkai Hu <Mingkai.hu@freescale.com>
9 */ 9 */
10 10
11 /dts-v1/; 11 /dts-v1/;
12 #include "fsl-ls1043a.dtsi" 12 #include "fsl-ls1043a.dtsi"
13 13
14 / { 14 / {
15 model = "LS1043A QDS Board"; 15 model = "LS1043A QDS Board";
16 compatible = "fsl,ls1043a-qds", "fsl,l 16 compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
17 17
18 aliases { 18 aliases {
19 gpio0 = &gpio1; 19 gpio0 = &gpio1;
20 gpio1 = &gpio2; 20 gpio1 = &gpio2;
21 gpio2 = &gpio3; 21 gpio2 = &gpio3;
22 gpio3 = &gpio4; 22 gpio3 = &gpio4;
23 serial0 = &duart0; 23 serial0 = &duart0;
24 serial1 = &duart1; 24 serial1 = &duart1;
25 serial2 = &duart2; 25 serial2 = &duart2;
26 serial3 = &duart3; 26 serial3 = &duart3;
27 sgmii-riser-s1-p1 = &sgmii_phy <<
28 sgmii-riser-s2-p1 = &sgmii_phy <<
29 sgmii-riser-s3-p1 = &sgmii_phy <<
30 sgmii-riser-s4-p1 = &sgmii_phy <<
31 qsgmii-s1-p1 = &qsgmii_phy_s1_ <<
32 qsgmii-s1-p2 = &qsgmii_phy_s1_ <<
33 qsgmii-s1-p3 = &qsgmii_phy_s1_ <<
34 qsgmii-s1-p4 = &qsgmii_phy_s1_ <<
35 qsgmii-s2-p1 = &qsgmii_phy_s2_ <<
36 qsgmii-s2-p2 = &qsgmii_phy_s2_ <<
37 qsgmii-s2-p3 = &qsgmii_phy_s2_ <<
38 qsgmii-s2-p4 = &qsgmii_phy_s2_ <<
39 emi1-slot1 = &ls1043mdio_s1; <<
40 emi1-slot2 = &ls1043mdio_s2; <<
41 emi1-slot3 = &ls1043mdio_s3; <<
42 emi1-slot4 = &ls1043mdio_s4; <<
43 }; 27 };
44 28
45 chosen { 29 chosen {
46 stdout-path = "serial0:115200n 30 stdout-path = "serial0:115200n8";
47 }; 31 };
48 }; 32 };
49 33
50 &duart0 { 34 &duart0 {
51 status = "okay"; 35 status = "okay";
52 }; 36 };
53 37
54 &duart1 { 38 &duart1 {
55 status = "okay"; 39 status = "okay";
56 }; 40 };
57 41
58 &ifc { 42 &ifc {
59 #address-cells = <2>; 43 #address-cells = <2>;
60 #size-cells = <1>; 44 #size-cells = <1>;
61 /* NOR, NAND Flashes and FPGA on board 45 /* NOR, NAND Flashes and FPGA on board */
62 ranges = <0x0 0x0 0x0 0x60000000 0x080 46 ranges = <0x0 0x0 0x0 0x60000000 0x08000000
63 0x1 0x0 0x0 0x7e800000 0x000 47 0x1 0x0 0x0 0x7e800000 0x00010000
64 0x2 0x0 0x0 0x7fb00000 0x000 48 0x2 0x0 0x0 0x7fb00000 0x00000100>;
65 status = "okay"; 49 status = "okay";
66 50
67 flash@0,0 { !! 51 nor@0,0 {
68 compatible = "cfi-flash"; 52 compatible = "cfi-flash";
69 reg = <0x0 0x0 0x8000000>; 53 reg = <0x0 0x0 0x8000000>;
70 big-endian; 54 big-endian;
71 bank-width = <2>; 55 bank-width = <2>;
72 device-width = <1>; 56 device-width = <1>;
73 }; 57 };
74 58
75 nand@1,0 { 59 nand@1,0 {
76 compatible = "fsl,ifc-nand"; 60 compatible = "fsl,ifc-nand";
77 reg = <0x1 0x0 0x10000>; 61 reg = <0x1 0x0 0x10000>;
78 }; 62 };
79 63
80 fpga: board-control@2,0 { 64 fpga: board-control@2,0 {
81 compatible = "fsl,ls1043aqds-f !! 65 compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
82 reg = <0x2 0x0 0x0000100>; 66 reg = <0x2 0x0 0x0000100>;
83 #address-cells = <1>; <<
84 #size-cells = <1>; <<
85 ranges = <0 2 0 0x100>; <<
86 }; 67 };
87 }; 68 };
88 69
89 &i2c0 { 70 &i2c0 {
90 status = "okay"; 71 status = "okay";
91 72
92 i2c-mux@77 { !! 73 pca9547@77 {
93 compatible = "nxp,pca9547"; 74 compatible = "nxp,pca9547";
94 reg = <0x77>; 75 reg = <0x77>;
95 #address-cells = <1>; 76 #address-cells = <1>;
96 #size-cells = <0>; 77 #size-cells = <0>;
97 78
98 i2c@0 { 79 i2c@0 {
99 #address-cells = <1>; 80 #address-cells = <1>;
100 #size-cells = <0>; 81 #size-cells = <0>;
101 reg = <0x0>; 82 reg = <0x0>;
102 83
103 rtc@68 { 84 rtc@68 {
104 compatible = " 85 compatible = "dallas,ds3232";
105 reg = <0x68>; 86 reg = <0x68>;
106 /* IRQ10_B */ 87 /* IRQ10_B */
107 interrupts = < 88 interrupts = <0 150 0x4>;
108 }; 89 };
109 }; 90 };
110 91
111 i2c@2 { 92 i2c@2 {
112 #address-cells = <1>; 93 #address-cells = <1>;
113 #size-cells = <0>; 94 #size-cells = <0>;
114 reg = <0x2>; 95 reg = <0x2>;
115 96
116 ina220@40 { 97 ina220@40 {
117 compatible = " 98 compatible = "ti,ina220";
118 reg = <0x40>; 99 reg = <0x40>;
119 shunt-resistor 100 shunt-resistor = <1000>;
120 }; 101 };
121 102
122 ina220@41 { 103 ina220@41 {
123 compatible = " 104 compatible = "ti,ina220";
124 reg = <0x41>; 105 reg = <0x41>;
125 shunt-resistor 106 shunt-resistor = <1000>;
126 }; 107 };
127 }; 108 };
128 109
129 i2c@3 { 110 i2c@3 {
130 #address-cells = <1>; 111 #address-cells = <1>;
131 #size-cells = <0>; 112 #size-cells = <0>;
132 reg = <0x3>; 113 reg = <0x3>;
133 114
134 eeprom@56 { 115 eeprom@56 {
135 compatible = " 116 compatible = "atmel,24c512";
136 reg = <0x56>; 117 reg = <0x56>;
137 }; 118 };
138 119
139 eeprom@57 { 120 eeprom@57 {
140 compatible = " 121 compatible = "atmel,24c512";
141 reg = <0x57>; 122 reg = <0x57>;
142 }; 123 };
143 124
144 temp-sensor@4c { 125 temp-sensor@4c {
145 compatible = " 126 compatible = "adi,adt7461a";
146 reg = <0x4c>; 127 reg = <0x4c>;
147 }; 128 };
148 }; 129 };
149 }; 130 };
150 }; 131 };
151 132
152 &lpuart0 { 133 &lpuart0 {
153 status = "okay"; 134 status = "okay";
154 }; 135 };
155 136
156 &qspi { 137 &qspi {
157 status = "okay"; 138 status = "okay";
158 139
159 qflash0: flash@0 { 140 qflash0: flash@0 {
160 compatible = "spansion,m25p80" 141 compatible = "spansion,m25p80";
161 #address-cells = <1>; 142 #address-cells = <1>;
162 #size-cells = <1>; 143 #size-cells = <1>;
163 spi-max-frequency = <20000000> 144 spi-max-frequency = <20000000>;
164 spi-rx-bus-width = <4>; 145 spi-rx-bus-width = <4>;
165 spi-tx-bus-width = <4>; 146 spi-tx-bus-width = <4>;
166 reg = <0>; 147 reg = <0>;
167 }; 148 };
168 }; 149 };
169 150
170 &usb0 { 151 &usb0 {
171 status = "okay"; 152 status = "okay";
172 }; 153 };
173 154
174 #include "fsl-ls1043-post.dtsi" 155 #include "fsl-ls1043-post.dtsi"
175 <<
176 &fman0 { <<
177 ethernet@e0000 { <<
178 phy-handle = <&qsgmii_phy_s2_p <<
179 phy-connection-type = "sgmii"; <<
180 }; <<
181 <<
182 ethernet@e2000 { <<
183 phy-handle = <&qsgmii_phy_s2_p <<
184 phy-connection-type = "sgmii"; <<
185 }; <<
186 <<
187 ethernet@e4000 { <<
188 phy-handle = <&rgmii_phy1>; <<
189 phy-connection-type = "rgmii"; <<
190 }; <<
191 <<
192 ethernet@e6000 { <<
193 phy-handle = <&rgmii_phy2>; <<
194 phy-connection-type = "rgmii"; <<
195 }; <<
196 <<
197 ethernet@e8000 { <<
198 phy-handle = <&qsgmii_phy_s2_p <<
199 phy-connection-type = "sgmii"; <<
200 }; <<
201 <<
202 ethernet@ea000 { <<
203 phy-handle = <&qsgmii_phy_s2_p <<
204 phy-connection-type = "sgmii"; <<
205 }; <<
206 <<
207 ethernet@f0000 { /* DTSEC9/10GEC1 */ <<
208 fixed-link = <1 1 10000 0 0>; <<
209 phy-connection-type = "xgmii"; <<
210 }; <<
211 }; <<
212 <<
213 &fpga { <<
214 mdio-mux@54 { <<
215 compatible = "mdio-mux-mmioreg <<
216 mdio-parent-bus = <&mdio0>; <<
217 #address-cells = <1>; <<
218 #size-cells = <0>; <<
219 reg = <0x54 1>; /* BRDCFG4 <<
220 mux-mask = <0xe0>; /* EMI1 */ <<
221 <<
222 /* On-board RGMII1 PHY */ <<
223 ls1043mdio0: mdio@0 { <<
224 reg = <0>; <<
225 #address-cells = <1>; <<
226 #size-cells = <0>; <<
227 <<
228 rgmii_phy1: ethernet-p <<
229 reg = <0x1>; <<
230 }; <<
231 }; <<
232 <<
233 /* On-board RGMII2 PHY */ <<
234 ls1043mdio1: mdio@20 { <<
235 reg = <0x20>; <<
236 #address-cells = <1>; <<
237 #size-cells = <0>; <<
238 <<
239 rgmii_phy2: ethernet-p <<
240 reg = <0x2>; <<
241 }; <<
242 }; <<
243 <<
244 /* Slot 1 */ <<
245 ls1043mdio_s1: mdio@40 { <<
246 reg = <0x40>; <<
247 #address-cells = <1>; <<
248 #size-cells = <0>; <<
249 status = "disabled"; <<
250 <<
251 qsgmii_phy_s1_p1: ethe <<
252 reg = <0x4>; <<
253 }; <<
254 <<
255 qsgmii_phy_s1_p2: ethe <<
256 reg = <0x5>; <<
257 }; <<
258 <<
259 qsgmii_phy_s1_p3: ethe <<
260 reg = <0x6>; <<
261 }; <<
262 <<
263 qsgmii_phy_s1_p4: ethe <<
264 reg = <0x7>; <<
265 }; <<
266 <<
267 sgmii_phy_s1_p1: ether <<
268 reg = <0x1c>; <<
269 }; <<
270 }; <<
271 <<
272 /* Slot 2 */ <<
273 ls1043mdio_s2: mdio@60 { <<
274 reg = <0x60>; <<
275 #address-cells = <1>; <<
276 #size-cells = <0>; <<
277 status = "disabled"; <<
278 <<
279 qsgmii_phy_s2_p1: ethe <<
280 reg = <0x8>; <<
281 }; <<
282 <<
283 qsgmii_phy_s2_p2: ethe <<
284 reg = <0x9>; <<
285 }; <<
286 <<
287 qsgmii_phy_s2_p3: ethe <<
288 reg = <0xa>; <<
289 }; <<
290 <<
291 qsgmii_phy_s2_p4: ethe <<
292 reg = <0xb>; <<
293 }; <<
294 <<
295 sgmii_phy_s2_p1: ether <<
296 reg = <0x1c>; <<
297 }; <<
298 }; <<
299 <<
300 /* Slot 3 */ <<
301 ls1043mdio_s3: mdio@80 { <<
302 reg = <0x80>; <<
303 #address-cells = <1>; <<
304 #size-cells = <0>; <<
305 status = "disabled"; <<
306 <<
307 sgmii_phy_s3_p1: ether <<
308 reg = <0x1c>; <<
309 }; <<
310 }; <<
311 <<
312 /* Slot 4 */ <<
313 ls1043mdio_s4: mdio@a0 { <<
314 reg = <0xa0>; <<
315 #address-cells = <1>; <<
316 #size-cells = <0>; <<
317 status = "disabled"; <<
318 <<
319 sgmii_phy_s4_p1: ether <<
320 reg = <0x1c>; <<
321 }; <<
322 }; <<
323 }; <<
324 }; <<
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.