1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) <<
2 /* 1 /*
3 * Device Tree Include file for NXP Layerscape 2 * Device Tree Include file for NXP Layerscape-1088A family SoC.
4 * 3 *
5 * Copyright 2017-2020 NXP !! 4 * Copyright 2017 NXP
6 * 5 *
7 * Harninder Rai <harninder.rai@nxp.com> 6 * Harninder Rai <harninder.rai@nxp.com>
8 * 7 *
>> 8 * This file is dual-licensed: you can use it either under the terms
>> 9 * of the GPLv2 or the X11 license, at your option. Note that this dual
>> 10 * licensing only applies to this file, and not this project as a
>> 11 * whole.
>> 12 *
>> 13 * a) This library is free software; you can redistribute it and/or
>> 14 * modify it under the terms of the GNU General Public License as
>> 15 * published by the Free Software Foundation; either version 2 of the
>> 16 * License, or (at your option) any later version.
>> 17 *
>> 18 * This library is distributed in the hope that it will be useful,
>> 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> 21 * GNU General Public License for more details.
>> 22 *
>> 23 * Or, alternatively,
>> 24 *
>> 25 * b) Permission is hereby granted, free of charge, to any person
>> 26 * obtaining a copy of this software and associated documentation
>> 27 * files (the "Software"), to deal in the Software without
>> 28 * restriction, including without limitation the rights to use,
>> 29 * copy, modify, merge, publish, distribute, sublicense, and/or
>> 30 * sell copies of the Software, and to permit persons to whom the
>> 31 * Software is furnished to do so, subject to the following
>> 32 * conditions:
>> 33 *
>> 34 * The above copyright notice and this permission notice shall be
>> 35 * included in all copies or substantial portions of the Software.
>> 36 *
>> 37 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> 38 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> 39 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> 40 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> 41 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> 42 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> 43 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> 44 * OTHER DEALINGS IN THE SOFTWARE.
9 */ 45 */
10 #include <dt-bindings/clock/fsl,qoriq-clockgen <<
11 #include <dt-bindings/interrupt-controller/arm 46 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/thermal/thermal.h> 47 #include <dt-bindings/thermal/thermal.h>
13 48
14 / { 49 / {
15 compatible = "fsl,ls1088a"; 50 compatible = "fsl,ls1088a";
16 interrupt-parent = <&gic>; 51 interrupt-parent = <&gic>;
17 #address-cells = <2>; 52 #address-cells = <2>;
18 #size-cells = <2>; 53 #size-cells = <2>;
19 54
20 aliases { 55 aliases {
21 crypto = &crypto; 56 crypto = &crypto;
22 rtc1 = &ftm_alarm0; <<
23 }; 57 };
24 58
25 cpus { 59 cpus {
26 #address-cells = <1>; 60 #address-cells = <1>;
27 #size-cells = <0>; 61 #size-cells = <0>;
28 62
29 /* We have 2 clusters having 4 63 /* We have 2 clusters having 4 Cortex-A53 cores each */
30 cpu0: cpu@0 { 64 cpu0: cpu@0 {
31 device_type = "cpu"; 65 device_type = "cpu";
32 compatible = "arm,cort 66 compatible = "arm,cortex-a53";
33 reg = <0x0>; 67 reg = <0x0>;
34 clocks = <&clockgen QO !! 68 clocks = <&clockgen 1 0>;
35 cpu-idle-states = <&CP 69 cpu-idle-states = <&CPU_PH20>;
36 #cooling-cells = <2>; 70 #cooling-cells = <2>;
37 }; 71 };
38 72
39 cpu1: cpu@1 { 73 cpu1: cpu@1 {
40 device_type = "cpu"; 74 device_type = "cpu";
41 compatible = "arm,cort 75 compatible = "arm,cortex-a53";
42 reg = <0x1>; 76 reg = <0x1>;
43 clocks = <&clockgen QO !! 77 clocks = <&clockgen 1 0>;
44 cpu-idle-states = <&CP 78 cpu-idle-states = <&CPU_PH20>;
45 #cooling-cells = <2>; <<
46 }; 79 };
47 80
48 cpu2: cpu@2 { 81 cpu2: cpu@2 {
49 device_type = "cpu"; 82 device_type = "cpu";
50 compatible = "arm,cort 83 compatible = "arm,cortex-a53";
51 reg = <0x2>; 84 reg = <0x2>;
52 clocks = <&clockgen QO !! 85 clocks = <&clockgen 1 0>;
53 cpu-idle-states = <&CP 86 cpu-idle-states = <&CPU_PH20>;
54 #cooling-cells = <2>; <<
55 }; 87 };
56 88
57 cpu3: cpu@3 { 89 cpu3: cpu@3 {
58 device_type = "cpu"; 90 device_type = "cpu";
59 compatible = "arm,cort 91 compatible = "arm,cortex-a53";
60 reg = <0x3>; 92 reg = <0x3>;
61 clocks = <&clockgen QO !! 93 clocks = <&clockgen 1 0>;
62 cpu-idle-states = <&CP 94 cpu-idle-states = <&CPU_PH20>;
63 #cooling-cells = <2>; <<
64 }; 95 };
65 96
66 cpu4: cpu@100 { 97 cpu4: cpu@100 {
67 device_type = "cpu"; 98 device_type = "cpu";
68 compatible = "arm,cort 99 compatible = "arm,cortex-a53";
69 reg = <0x100>; 100 reg = <0x100>;
70 clocks = <&clockgen QO !! 101 clocks = <&clockgen 1 1>;
71 cpu-idle-states = <&CP 102 cpu-idle-states = <&CPU_PH20>;
72 #cooling-cells = <2>; 103 #cooling-cells = <2>;
73 }; 104 };
74 105
75 cpu5: cpu@101 { 106 cpu5: cpu@101 {
76 device_type = "cpu"; 107 device_type = "cpu";
77 compatible = "arm,cort 108 compatible = "arm,cortex-a53";
78 reg = <0x101>; 109 reg = <0x101>;
79 clocks = <&clockgen QO !! 110 clocks = <&clockgen 1 1>;
80 cpu-idle-states = <&CP 111 cpu-idle-states = <&CPU_PH20>;
81 #cooling-cells = <2>; <<
82 }; 112 };
83 113
84 cpu6: cpu@102 { 114 cpu6: cpu@102 {
85 device_type = "cpu"; 115 device_type = "cpu";
86 compatible = "arm,cort 116 compatible = "arm,cortex-a53";
87 reg = <0x102>; 117 reg = <0x102>;
88 clocks = <&clockgen QO !! 118 clocks = <&clockgen 1 1>;
89 cpu-idle-states = <&CP 119 cpu-idle-states = <&CPU_PH20>;
90 #cooling-cells = <2>; <<
91 }; 120 };
92 121
93 cpu7: cpu@103 { 122 cpu7: cpu@103 {
94 device_type = "cpu"; 123 device_type = "cpu";
95 compatible = "arm,cort 124 compatible = "arm,cortex-a53";
96 reg = <0x103>; 125 reg = <0x103>;
97 clocks = <&clockgen QO !! 126 clocks = <&clockgen 1 1>;
98 cpu-idle-states = <&CP 127 cpu-idle-states = <&CPU_PH20>;
99 #cooling-cells = <2>; <<
100 }; 128 };
101 129
102 CPU_PH20: cpu-ph20 { 130 CPU_PH20: cpu-ph20 {
103 compatible = "arm,idle 131 compatible = "arm,idle-state";
104 idle-state-name = "PH2 132 idle-state-name = "PH20";
105 arm,psci-suspend-param !! 133 arm,psci-suspend-param = <0x00010000>;
106 entry-latency-us = <10 134 entry-latency-us = <1000>;
107 exit-latency-us = <100 135 exit-latency-us = <1000>;
108 min-residency-us = <30 136 min-residency-us = <3000>;
109 }; 137 };
110 }; 138 };
111 139
112 gic: interrupt-controller@6000000 { 140 gic: interrupt-controller@6000000 {
113 compatible = "arm,gic-v3"; 141 compatible = "arm,gic-v3";
114 #interrupt-cells = <3>; 142 #interrupt-cells = <3>;
115 interrupt-controller; 143 interrupt-controller;
116 reg = <0x0 0x06000000 0 0x1000 144 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
117 <0x0 0x06100000 0 0x1000 145 <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
118 <0x0 0x0c0c0000 0 0x2000 146 <0x0 0x0c0c0000 0 0x2000>, /* GICC */
119 <0x0 0x0c0d0000 0 0x1000 147 <0x0 0x0c0d0000 0 0x1000>, /* GICH */
120 <0x0 0x0c0e0000 0 0x2000 148 <0x0 0x0c0e0000 0 0x20000>; /* GICV */
121 interrupts = <GIC_PPI 9 IRQ_TY !! 149 interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
122 #address-cells = <2>; <<
123 #size-cells = <2>; <<
124 ranges; <<
125 <<
126 its: msi-controller@6020000 { <<
127 compatible = "arm,gic- <<
128 msi-controller; <<
129 #msi-cells = <1>; <<
130 reg = <0x0 0x6020000 0 <<
131 }; <<
132 }; <<
133 <<
134 thermal-zones { <<
135 cluster-thermal { <<
136 polling-delay-passive <<
137 polling-delay = <5000> <<
138 thermal-sensors = <&tm <<
139 <<
140 trips { <<
141 core_cluster_a <<
142 temper <<
143 hyster <<
144 type = <<
145 }; <<
146 <<
147 core-cluster-c <<
148 temper <<
149 hyster <<
150 type = <<
151 }; <<
152 }; <<
153 <<
154 cooling-maps { <<
155 map0 { <<
156 trip = <<
157 coolin <<
158 <<
159 <<
160 <<
161 <<
162 <<
163 <<
164 <<
165 <<
166 }; <<
167 }; <<
168 }; <<
169 <<
170 soc-thermal { <<
171 polling-delay-passive <<
172 polling-delay = <5000> <<
173 thermal-sensors = <&tm <<
174 <<
175 trips { <<
176 soc-crit { <<
177 temper <<
178 hyster <<
179 type = <<
180 }; <<
181 }; <<
182 }; <<
183 }; 150 };
184 151
185 timer { 152 timer {
186 compatible = "arm,armv8-timer" 153 compatible = "arm,armv8-timer";
187 interrupts = <GIC_PPI 13 IRQ_T !! 154 interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
188 <GIC_PPI 14 IRQ_T !! 155 <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
189 <GIC_PPI 11 IRQ_T !! 156 <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
190 <GIC_PPI 10 IRQ_T !! 157 <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
191 }; <<
192 <<
193 pmu { <<
194 compatible = "arm,cortex-a53-p <<
195 interrupts = <GIC_PPI 7 IRQ_TY <<
196 }; 158 };
197 159
198 psci { 160 psci {
199 compatible = "arm,psci-0.2"; 161 compatible = "arm,psci-0.2";
200 method = "smc"; 162 method = "smc";
201 }; 163 };
202 164
203 sysclk: sysclk { 165 sysclk: sysclk {
204 compatible = "fixed-clock"; 166 compatible = "fixed-clock";
205 #clock-cells = <0>; 167 #clock-cells = <0>;
206 clock-frequency = <100000000>; 168 clock-frequency = <100000000>;
207 clock-output-names = "sysclk"; 169 clock-output-names = "sysclk";
208 }; 170 };
209 171
210 reboot { <<
211 compatible = "syscon-reboot"; <<
212 regmap = <&reset>; <<
213 offset = <0x0>; <<
214 mask = <0x02>; <<
215 }; <<
216 <<
217 soc { 172 soc {
218 compatible = "simple-bus"; 173 compatible = "simple-bus";
219 #address-cells = <2>; 174 #address-cells = <2>;
220 #size-cells = <2>; 175 #size-cells = <2>;
221 ranges; 176 ranges;
222 dma-ranges = <0x0 0x0 0x0 0x0 <<
223 177
224 clockgen: clocking@1300000 { 178 clockgen: clocking@1300000 {
225 compatible = "fsl,ls10 179 compatible = "fsl,ls1088a-clockgen";
226 reg = <0 0x1300000 0 0 180 reg = <0 0x1300000 0 0xa0000>;
227 #clock-cells = <2>; 181 #clock-cells = <2>;
228 clocks = <&sysclk>; 182 clocks = <&sysclk>;
229 }; 183 };
230 184
231 dcfg: dcfg@1e00000 { <<
232 compatible = "fsl,ls10 <<
233 reg = <0x0 0x1e00000 0 <<
234 little-endian; <<
235 }; <<
236 <<
237 reset: syscon@1e60000 { <<
238 compatible = "fsl,ls10 <<
239 reg = <0x0 0x1e60000 0 <<
240 }; <<
241 <<
242 isc: syscon@1f70000 { <<
243 compatible = "fsl,ls10 <<
244 reg = <0x0 0x1f70000 0 <<
245 little-endian; <<
246 #address-cells = <1>; <<
247 #size-cells = <1>; <<
248 ranges = <0x0 0x0 0x1f <<
249 <<
250 extirq: interrupt-cont <<
251 compatible = " <<
252 #interrupt-cel <<
253 #address-cells <<
254 interrupt-cont <<
255 reg = <0x14 4> <<
256 interrupt-map <<
257 <0 0 & <<
258 <1 0 & <<
259 <2 0 & <<
260 <3 0 & <<
261 <4 0 & <<
262 <5 0 & <<
263 <6 0 & <<
264 <7 0 & <<
265 <8 0 & <<
266 <9 0 & <<
267 <10 0 <<
268 <11 0 <<
269 interrupt-map- <<
270 }; <<
271 }; <<
272 <<
273 sfp: efuse@1e80000 { <<
274 compatible = "fsl,ls10 <<
275 reg = <0x0 0x1e80000 0 <<
276 clocks = <&clockgen QO <<
277 QO <<
278 clock-names = "sfp"; <<
279 }; <<
280 <<
281 tmu: tmu@1f80000 { 185 tmu: tmu@1f80000 {
282 compatible = "fsl,qori 186 compatible = "fsl,qoriq-tmu";
283 reg = <0x0 0x1f80000 0 187 reg = <0x0 0x1f80000 0x0 0x10000>;
284 interrupts = <GIC_SPI !! 188 interrupts = <0 23 0x4>;
285 fsl,tmu-range = <0xb00 !! 189 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
286 fsl,tmu-calibration = 190 fsl,tmu-calibration =
287 /* Calibration 191 /* Calibration data group 1 */
288 <0x00000000 0x !! 192 <0x00000000 0x00000026
289 <0x00000001 0x !! 193 0x00000001 0x0000002d
290 <0x00000002 0x !! 194 0x00000002 0x00000032
291 <0x00000003 0x !! 195 0x00000003 0x00000039
292 <0x00000004 0x !! 196 0x00000004 0x0000003f
293 <0x00000005 0x !! 197 0x00000005 0x00000046
294 <0x00000006 0x !! 198 0x00000006 0x0000004d
295 <0x00000007 0x !! 199 0x00000007 0x00000054
296 <0x00000008 0x !! 200 0x00000008 0x0000005a
297 <0x00000009 0x !! 201 0x00000009 0x00000061
298 <0x0000000a 0x !! 202 0x0000000a 0x0000006a
299 <0x0000000b 0x !! 203 0x0000000b 0x00000071
300 /* Calibration 204 /* Calibration data group 2 */
301 <0x00010000 0x !! 205 0x00010000 0x00000025
302 <0x00010001 0x !! 206 0x00010001 0x0000002c
303 <0x00010002 0x !! 207 0x00010002 0x00000035
304 <0x00010003 0x !! 208 0x00010003 0x0000003d
305 <0x00010004 0x !! 209 0x00010004 0x00000045
306 <0x00010005 0x !! 210 0x00010005 0x0000004e
307 <0x00010006 0x !! 211 0x00010006 0x00000057
308 <0x00010007 0x !! 212 0x00010007 0x00000061
309 <0x00010008 0x !! 213 0x00010008 0x0000006b
310 <0x00010009 0x !! 214 0x00010009 0x00000076
311 /* Calibration 215 /* Calibration data group 3 */
312 <0x00020000 0x !! 216 0x00020000 0x00000029
313 <0x00020001 0x !! 217 0x00020001 0x00000033
314 <0x00020002 0x !! 218 0x00020002 0x0000003d
315 <0x00020003 0x !! 219 0x00020003 0x00000049
316 <0x00020004 0x !! 220 0x00020004 0x00000056
317 <0x00020005 0x !! 221 0x00020005 0x00000061
318 <0x00020006 0x !! 222 0x00020006 0x0000006d
319 /* Calibration 223 /* Calibration data group 4 */
320 <0x00030000 0x !! 224 0x00030000 0x00000021
321 <0x00030001 0x !! 225 0x00030001 0x0000002a
322 <0x00030002 0x !! 226 0x00030002 0x0000003c
323 <0x00030003 0x !! 227 0x00030003 0x0000004e>;
324 <0x00030004 0x <<
325 <0x00030005 0x <<
326 <0x00030006 0x <<
327 <0x00030007 0x <<
328 little-endian; 228 little-endian;
329 #thermal-sensor-cells 229 #thermal-sensor-cells = <1>;
330 }; 230 };
331 231
332 dspi: spi@2100000 { !! 232 thermal-zones {
333 compatible = "fsl,ls10 !! 233 cpu_thermal: cpu-thermal {
334 "fsl,ls10 !! 234 polling-delay-passive = <1000>;
335 #address-cells = <1>; !! 235 polling-delay = <5000>;
336 #size-cells = <0>; !! 236 thermal-sensors = <&tmu 0>;
337 reg = <0x0 0x2100000 0 !! 237
338 interrupts = <GIC_SPI !! 238 trips {
339 clock-names = "dspi"; !! 239 cpu_alert: cpu-alert {
340 clocks = <&clockgen QO !! 240 temperature = <85000>;
341 QO !! 241 hysteresis = <2000>;
342 spi-num-chipselects = !! 242 type = "passive";
343 status = "disabled"; !! 243 };
>> 244
>> 245 cpu_crit: cpu-crit {
>> 246 temperature = <95000>;
>> 247 hysteresis = <2000>;
>> 248 type = "critical";
>> 249 };
>> 250 };
>> 251
>> 252 cooling-maps {
>> 253 map0 {
>> 254 trip = <&cpu_alert>;
>> 255 cooling-device =
>> 256 <&cpu0 THERMAL_NO_LIMIT
>> 257 THERMAL_NO_LIMIT>;
>> 258 };
>> 259
>> 260 map1 {
>> 261 trip = <&cpu_alert>;
>> 262 cooling-device =
>> 263 <&cpu4 THERMAL_NO_LIMIT
>> 264 THERMAL_NO_LIMIT>;
>> 265 };
>> 266 };
>> 267 };
344 }; 268 };
345 269
346 duart0: serial@21c0500 { 270 duart0: serial@21c0500 {
347 compatible = "fsl,ns16 271 compatible = "fsl,ns16550", "ns16550a";
348 reg = <0x0 0x21c0500 0 272 reg = <0x0 0x21c0500 0x0 0x100>;
349 clocks = <&clockgen QO !! 273 clocks = <&clockgen 4 3>;
350 QO !! 274 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
351 interrupts = <GIC_SPI <<
352 status = "disabled"; 275 status = "disabled";
353 }; 276 };
354 277
355 duart1: serial@21c0600 { 278 duart1: serial@21c0600 {
356 compatible = "fsl,ns16 279 compatible = "fsl,ns16550", "ns16550a";
357 reg = <0x0 0x21c0600 0 280 reg = <0x0 0x21c0600 0x0 0x100>;
358 clocks = <&clockgen QO !! 281 clocks = <&clockgen 4 3>;
359 QO !! 282 interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
360 interrupts = <GIC_SPI <<
361 status = "disabled"; 283 status = "disabled";
362 }; 284 };
363 285
364 gpio0: gpio@2300000 { 286 gpio0: gpio@2300000 {
365 compatible = "fsl,ls10 !! 287 compatible = "fsl,qoriq-gpio";
366 reg = <0x0 0x2300000 0 288 reg = <0x0 0x2300000 0x0 0x10000>;
367 interrupts = <GIC_SPI !! 289 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
368 little-endian; <<
369 gpio-controller; 290 gpio-controller;
370 #gpio-cells = <2>; 291 #gpio-cells = <2>;
371 interrupt-controller; 292 interrupt-controller;
372 #interrupt-cells = <2> 293 #interrupt-cells = <2>;
373 }; 294 };
374 295
375 gpio1: gpio@2310000 { 296 gpio1: gpio@2310000 {
376 compatible = "fsl,ls10 !! 297 compatible = "fsl,qoriq-gpio";
377 reg = <0x0 0x2310000 0 298 reg = <0x0 0x2310000 0x0 0x10000>;
378 interrupts = <GIC_SPI !! 299 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
379 little-endian; <<
380 gpio-controller; 300 gpio-controller;
381 #gpio-cells = <2>; 301 #gpio-cells = <2>;
382 interrupt-controller; 302 interrupt-controller;
383 #interrupt-cells = <2> 303 #interrupt-cells = <2>;
384 }; 304 };
385 305
386 gpio2: gpio@2320000 { 306 gpio2: gpio@2320000 {
387 compatible = "fsl,ls10 !! 307 compatible = "fsl,qoriq-gpio";
388 reg = <0x0 0x2320000 0 308 reg = <0x0 0x2320000 0x0 0x10000>;
389 interrupts = <GIC_SPI !! 309 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
390 little-endian; <<
391 gpio-controller; 310 gpio-controller;
392 #gpio-cells = <2>; 311 #gpio-cells = <2>;
393 interrupt-controller; 312 interrupt-controller;
394 #interrupt-cells = <2> 313 #interrupt-cells = <2>;
395 }; 314 };
396 315
397 gpio3: gpio@2330000 { 316 gpio3: gpio@2330000 {
398 compatible = "fsl,ls10 !! 317 compatible = "fsl,qoriq-gpio";
399 reg = <0x0 0x2330000 0 318 reg = <0x0 0x2330000 0x0 0x10000>;
400 interrupts = <GIC_SPI !! 319 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
401 little-endian; <<
402 gpio-controller; 320 gpio-controller;
403 #gpio-cells = <2>; 321 #gpio-cells = <2>;
404 interrupt-controller; 322 interrupt-controller;
405 #interrupt-cells = <2> 323 #interrupt-cells = <2>;
406 }; 324 };
407 325
408 ifc: memory-controller@2240000 !! 326 ifc: ifc@2240000 {
409 compatible = "fsl,ifc" !! 327 compatible = "fsl,ifc", "simple-bus";
410 reg = <0x0 0x2240000 0 328 reg = <0x0 0x2240000 0x0 0x20000>;
411 interrupts = <GIC_SPI !! 329 interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
412 little-endian; 330 little-endian;
413 #address-cells = <2>; 331 #address-cells = <2>;
414 #size-cells = <1>; 332 #size-cells = <1>;
415 status = "disabled"; 333 status = "disabled";
416 }; 334 };
417 335
418 i2c0: i2c@2000000 { 336 i2c0: i2c@2000000 {
419 compatible = "fsl,vf61 337 compatible = "fsl,vf610-i2c";
420 #address-cells = <1>; 338 #address-cells = <1>;
421 #size-cells = <0>; 339 #size-cells = <0>;
422 reg = <0x0 0x2000000 0 340 reg = <0x0 0x2000000 0x0 0x10000>;
423 interrupts = <GIC_SPI !! 341 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
424 clocks = <&clockgen QO !! 342 clocks = <&clockgen 4 3>;
425 QO <<
426 status = "disabled"; 343 status = "disabled";
427 }; 344 };
428 345
429 i2c1: i2c@2010000 { 346 i2c1: i2c@2010000 {
430 compatible = "fsl,vf61 347 compatible = "fsl,vf610-i2c";
431 #address-cells = <1>; 348 #address-cells = <1>;
432 #size-cells = <0>; 349 #size-cells = <0>;
433 reg = <0x0 0x2010000 0 350 reg = <0x0 0x2010000 0x0 0x10000>;
434 interrupts = <GIC_SPI !! 351 interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
435 clocks = <&clockgen QO !! 352 clocks = <&clockgen 4 3>;
436 QO <<
437 status = "disabled"; 353 status = "disabled";
438 }; 354 };
439 355
440 i2c2: i2c@2020000 { 356 i2c2: i2c@2020000 {
441 compatible = "fsl,vf61 357 compatible = "fsl,vf610-i2c";
442 #address-cells = <1>; 358 #address-cells = <1>;
443 #size-cells = <0>; 359 #size-cells = <0>;
444 reg = <0x0 0x2020000 0 360 reg = <0x0 0x2020000 0x0 0x10000>;
445 interrupts = <GIC_SPI !! 361 interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
446 clocks = <&clockgen QO !! 362 clocks = <&clockgen 4 3>;
447 QO <<
448 status = "disabled"; 363 status = "disabled";
449 }; 364 };
450 365
451 i2c3: i2c@2030000 { 366 i2c3: i2c@2030000 {
452 compatible = "fsl,vf61 367 compatible = "fsl,vf610-i2c";
453 #address-cells = <1>; 368 #address-cells = <1>;
454 #size-cells = <0>; 369 #size-cells = <0>;
455 reg = <0x0 0x2030000 0 370 reg = <0x0 0x2030000 0x0 0x10000>;
456 interrupts = <GIC_SPI !! 371 interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
457 clocks = <&clockgen QO !! 372 clocks = <&clockgen 4 3>;
458 QO <<
459 status = "disabled"; 373 status = "disabled";
460 }; 374 };
461 375
462 qspi: spi@20c0000 { !! 376 esdhc: esdhc@2140000 {
463 compatible = "fsl,ls20 <<
464 #address-cells = <1>; <<
465 #size-cells = <0>; <<
466 reg = <0x0 0x20c0000 0 <<
467 <0x0 0x20000000 <<
468 reg-names = "QuadSPI", <<
469 interrupts = <GIC_SPI <<
470 clock-names = "qspi_en <<
471 clocks = <&clockgen QO <<
472 QO <<
473 <&clockgen QO <<
474 QO <<
475 status = "disabled"; <<
476 }; <<
477 <<
478 esdhc: mmc@2140000 { <<
479 compatible = "fsl,ls10 377 compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
480 reg = <0x0 0x2140000 0 378 reg = <0x0 0x2140000 0x0 0x10000>;
481 interrupts = <GIC_SPI !! 379 interrupts = <0 28 0x4>; /* Level high type */
482 clock-frequency = <0>; 380 clock-frequency = <0>;
483 clocks = <&clockgen QO <<
484 voltage-ranges = <1800 381 voltage-ranges = <1800 1800 3300 3300>;
485 sdhci,auto-cmd12; 382 sdhci,auto-cmd12;
486 little-endian; 383 little-endian;
487 bus-width = <4>; 384 bus-width = <4>;
488 status = "disabled"; 385 status = "disabled";
489 }; 386 };
490 387
491 usb0: usb@3100000 { <<
492 compatible = "snps,dwc <<
493 reg = <0x0 0x3100000 0 <<
494 interrupts = <GIC_SPI <<
495 dr_mode = "host"; <<
496 snps,quirk-frame-lengt <<
497 snps,dis_rxdet_inp3_qu <<
498 snps,incr-burst-type-a <<
499 status = "disabled"; <<
500 }; <<
501 <<
502 usb1: usb@3110000 { <<
503 compatible = "snps,dwc <<
504 reg = <0x0 0x3110000 0 <<
505 interrupts = <GIC_SPI <<
506 dr_mode = "host"; <<
507 snps,quirk-frame-lengt <<
508 snps,dis_rxdet_inp3_qu <<
509 snps,incr-burst-type-a <<
510 status = "disabled"; <<
511 }; <<
512 <<
513 sata: sata@3200000 { 388 sata: sata@3200000 {
514 compatible = "fsl,ls10 389 compatible = "fsl,ls1088a-ahci";
515 reg = <0x0 0x3200000 0 390 reg = <0x0 0x3200000 0x0 0x10000>,
516 <0x7 0x100520 391 <0x7 0x100520 0x0 0x4>;
517 reg-names = "ahci", "s 392 reg-names = "ahci", "sata-ecc";
518 interrupts = <GIC_SPI !! 393 interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
519 clocks = <&clockgen QO !! 394 clocks = <&clockgen 4 3>;
520 QO <<
521 dma-coherent; 395 dma-coherent;
522 status = "disabled"; 396 status = "disabled";
523 }; 397 };
524 398
525 crypto: crypto@8000000 { 399 crypto: crypto@8000000 {
526 compatible = "fsl,sec- 400 compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
527 fsl,sec-era = <8>; 401 fsl,sec-era = <8>;
528 #address-cells = <1>; 402 #address-cells = <1>;
529 #size-cells = <1>; 403 #size-cells = <1>;
530 ranges = <0x0 0x00 0x8 404 ranges = <0x0 0x00 0x8000000 0x100000>;
531 reg = <0x00 0x8000000 405 reg = <0x00 0x8000000 0x0 0x100000>;
532 interrupts = <GIC_SPI 406 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
533 dma-coherent; 407 dma-coherent;
534 408
535 sec_jr0: jr@10000 { 409 sec_jr0: jr@10000 {
536 compatible = " 410 compatible = "fsl,sec-v5.0-job-ring",
537 " 411 "fsl,sec-v4.0-job-ring";
538 reg = <0x10000 !! 412 reg = <0x10000 0x10000>;
539 interrupts = < 413 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
540 }; 414 };
541 415
542 sec_jr1: jr@20000 { 416 sec_jr1: jr@20000 {
543 compatible = " 417 compatible = "fsl,sec-v5.0-job-ring",
544 " 418 "fsl,sec-v4.0-job-ring";
545 reg = <0x20000 !! 419 reg = <0x20000 0x10000>;
546 interrupts = < 420 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
547 }; 421 };
548 422
549 sec_jr2: jr@30000 { 423 sec_jr2: jr@30000 {
550 compatible = " 424 compatible = "fsl,sec-v5.0-job-ring",
551 " 425 "fsl,sec-v4.0-job-ring";
552 reg = <0x30000 !! 426 reg = <0x30000 0x10000>;
553 interrupts = < 427 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
554 }; 428 };
555 429
556 sec_jr3: jr@40000 { 430 sec_jr3: jr@40000 {
557 compatible = " 431 compatible = "fsl,sec-v5.0-job-ring",
558 " 432 "fsl,sec-v4.0-job-ring";
559 reg = <0x40000 !! 433 reg = <0x40000 0x10000>;
560 interrupts = < 434 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
561 }; 435 };
562 }; 436 };
563 <<
564 pcie1: pcie@3400000 { <<
565 compatible = "fsl,ls10 <<
566 reg = <0x00 0x03400000 <<
567 <0x20 0x00000000 <<
568 reg-names = "regs", "c <<
569 interrupts = <GIC_SPI <<
570 interrupt-names = "aer <<
571 #address-cells = <3>; <<
572 #size-cells = <2>; <<
573 device_type = "pci"; <<
574 dma-coherent; <<
575 num-viewport = <256>; <<
576 bus-range = <0x0 0xff> <<
577 ranges = <0x81000000 0 <<
578 0x82000000 0 <<
579 msi-parent = <&its 0>; <<
580 #interrupt-cells = <1> <<
581 interrupt-map-mask = < <<
582 interrupt-map = <0000 <<
583 <0000 <<
584 <0000 <<
585 <0000 <<
586 iommu-map = <0 &smmu 0 <<
587 status = "disabled"; <<
588 }; <<
589 <<
590 pcie_ep1: pcie-ep@3400000 { <<
591 compatible = "fsl,ls10 <<
592 reg = <0x00 0x03400000 <<
593 <0x20 0x00000000 <<
594 reg-names = "regs", "a <<
595 interrupts = <GIC_SPI <<
596 interrupt-names = "pme <<
597 num-ib-windows = <24>; <<
598 num-ob-windows = <256> <<
599 max-functions = /bits/ <<
600 status = "disabled"; <<
601 }; <<
602 <<
603 pcie2: pcie@3500000 { <<
604 compatible = "fsl,ls10 <<
605 reg = <0x00 0x03500000 <<
606 <0x28 0x00000000 <<
607 reg-names = "regs", "c <<
608 interrupts = <GIC_SPI <<
609 interrupt-names = "aer <<
610 #address-cells = <3>; <<
611 #size-cells = <2>; <<
612 device_type = "pci"; <<
613 dma-coherent; <<
614 num-viewport = <6>; <<
615 bus-range = <0x0 0xff> <<
616 ranges = <0x81000000 0 <<
617 0x82000000 0 <<
618 msi-parent = <&its 0>; <<
619 #interrupt-cells = <1> <<
620 interrupt-map-mask = < <<
621 interrupt-map = <0000 <<
622 <0000 <<
623 <0000 <<
624 <0000 <<
625 iommu-map = <0 &smmu 0 <<
626 status = "disabled"; <<
627 }; <<
628 <<
629 pcie_ep2: pcie-ep@3500000 { <<
630 compatible = "fsl,ls10 <<
631 reg = <0x00 0x03500000 <<
632 <0x28 0x00000000 <<
633 reg-names = "regs", "a <<
634 interrupts = <GIC_SPI <<
635 interrupt-names = "pme <<
636 num-ib-windows = <6>; <<
637 num-ob-windows = <6>; <<
638 status = "disabled"; <<
639 }; <<
640 <<
641 pcie3: pcie@3600000 { <<
642 compatible = "fsl,ls10 <<
643 reg = <0x00 0x03600000 <<
644 <0x30 0x00000000 <<
645 reg-names = "regs", "c <<
646 interrupts = <GIC_SPI <<
647 interrupt-names = "aer <<
648 #address-cells = <3>; <<
649 #size-cells = <2>; <<
650 device_type = "pci"; <<
651 dma-coherent; <<
652 num-viewport = <6>; <<
653 bus-range = <0x0 0xff> <<
654 ranges = <0x81000000 0 <<
655 0x82000000 0 <<
656 msi-parent = <&its 0>; <<
657 #interrupt-cells = <1> <<
658 interrupt-map-mask = < <<
659 interrupt-map = <0000 <<
660 <0000 <<
661 <0000 <<
662 <0000 <<
663 iommu-map = <0 &smmu 0 <<
664 status = "disabled"; <<
665 }; <<
666 <<
667 pcie_ep3: pcie-ep@3600000 { <<
668 compatible = "fsl,ls10 <<
669 reg = <0x00 0x03600000 <<
670 <0x30 0x00000000 <<
671 reg-names = "regs", "a <<
672 interrupts = <GIC_SPI <<
673 interrupt-names = "pme <<
674 num-ib-windows = <6>; <<
675 num-ob-windows = <6>; <<
676 status = "disabled"; <<
677 }; <<
678 <<
679 smmu: iommu@5000000 { <<
680 compatible = "arm,mmu- <<
681 reg = <0 0x5000000 0 0 <<
682 #iommu-cells = <1>; <<
683 stream-match-mask = <0 <<
684 dma-coherent; <<
685 #global-interrupts = < <<
686 // global <<
687 interrupts = <GIC_SPI <<
688 // combin <<
689 <GIC_SPI <<
690 // global <<
691 <GIC_SPI <<
692 // combin <<
693 <GIC_SPI <<
694 // perfor <<
695 <GIC_SPI <<
696 <GIC_SPI <<
697 <GIC_SPI <<
698 <GIC_SPI <<
699 <GIC_SPI <<
700 <GIC_SPI <<
701 <GIC_SPI <<
702 <GIC_SPI <<
703 // per co <<
704 <GIC_SPI <<
705 <GIC_SPI <<
706 <GIC_SPI <<
707 <GIC_SPI <<
708 <GIC_SPI <<
709 <GIC_SPI <<
710 <GIC_SPI <<
711 <GIC_SPI <<
712 <GIC_SPI <<
713 <GIC_SPI <<
714 <GIC_SPI <<
715 <GIC_SPI <<
716 <GIC_SPI <<
717 <GIC_SPI <<
718 <GIC_SPI <<
719 <GIC_SPI <<
720 <GIC_SPI <<
721 <GIC_SPI <<
722 <GIC_SPI <<
723 <GIC_SPI <<
724 <GIC_SPI <<
725 <GIC_SPI <<
726 <GIC_SPI <<
727 <GIC_SPI <<
728 <GIC_SPI <<
729 <GIC_SPI <<
730 <GIC_SPI <<
731 <GIC_SPI <<
732 <GIC_SPI <<
733 <GIC_SPI <<
734 <GIC_SPI <<
735 <GIC_SPI <<
736 <GIC_SPI <<
737 <GIC_SPI <<
738 <GIC_SPI <<
739 <GIC_SPI <<
740 <GIC_SPI <<
741 <GIC_SPI <<
742 <GIC_SPI <<
743 <GIC_SPI <<
744 <GIC_SPI <<
745 <GIC_SPI <<
746 <GIC_SPI <<
747 <GIC_SPI <<
748 <GIC_SPI <<
749 <GIC_SPI <<
750 <GIC_SPI <<
751 <GIC_SPI <<
752 <GIC_SPI <<
753 <GIC_SPI <<
754 <GIC_SPI <<
755 <GIC_SPI <<
756 <GIC_SPI <<
757 <GIC_SPI <<
758 <GIC_SPI <<
759 <GIC_SPI <<
760 <GIC_SPI <<
761 <GIC_SPI <<
762 <GIC_SPI <<
763 <GIC_SPI <<
764 <GIC_SPI <<
765 <GIC_SPI <<
766 <GIC_SPI <<
767 <GIC_SPI <<
768 }; <<
769 <<
770 console@8340020 { <<
771 compatible = "fsl,dpaa <<
772 reg = <0x00000000 0x08 <<
773 }; <<
774 <<
775 ptp-timer@8b95000 { <<
776 compatible = "fsl,dpaa <<
777 reg = <0x0 0x8b95000 0 <<
778 clocks = <&clockgen QO <<
779 QO <<
780 little-endian; <<
781 fsl,extts-fifo; <<
782 }; <<
783 <<
784 emdio1: mdio@8b96000 { <<
785 compatible = "fsl,fman <<
786 reg = <0x0 0x8b96000 0 <<
787 little-endian; <<
788 #address-cells = <1>; <<
789 #size-cells = <0>; <<
790 clock-frequency = <250 <<
791 clocks = <&clockgen QO <<
792 QO <<
793 status = "disabled"; <<
794 }; <<
795 <<
796 emdio2: mdio@8b97000 { <<
797 compatible = "fsl,fman <<
798 reg = <0x0 0x8b97000 0 <<
799 little-endian; <<
800 #address-cells = <1>; <<
801 #size-cells = <0>; <<
802 clock-frequency = <250 <<
803 clocks = <&clockgen QO <<
804 QO <<
805 status = "disabled"; <<
806 }; <<
807 <<
808 pcs_mdio1: mdio@8c07000 { <<
809 compatible = "fsl,fman <<
810 reg = <0x0 0x8c07000 0 <<
811 little-endian; <<
812 #address-cells = <1>; <<
813 #size-cells = <0>; <<
814 status = "disabled"; <<
815 <<
816 pcs1: ethernet-phy@0 { <<
817 reg = <0>; <<
818 }; <<
819 }; <<
820 <<
821 pcs_mdio2: mdio@8c0b000 { <<
822 compatible = "fsl,fman <<
823 reg = <0x0 0x8c0b000 0 <<
824 little-endian; <<
825 #address-cells = <1>; <<
826 #size-cells = <0>; <<
827 status = "disabled"; <<
828 <<
829 pcs2: ethernet-phy@0 { <<
830 reg = <0>; <<
831 }; <<
832 }; <<
833 <<
834 pcs_mdio3: mdio@8c0f000 { <<
835 compatible = "fsl,fman <<
836 reg = <0x0 0x8c0f000 0 <<
837 little-endian; <<
838 #address-cells = <1>; <<
839 #size-cells = <0>; <<
840 status = "disabled"; <<
841 <<
842 pcs3_0: ethernet-phy@0 <<
843 reg = <0>; <<
844 }; <<
845 <<
846 pcs3_1: ethernet-phy@1 <<
847 reg = <1>; <<
848 }; <<
849 <<
850 pcs3_2: ethernet-phy@2 <<
851 reg = <2>; <<
852 }; <<
853 <<
854 pcs3_3: ethernet-phy@3 <<
855 reg = <3>; <<
856 }; <<
857 }; <<
858 <<
859 pcs_mdio7: mdio@8c1f000 { <<
860 compatible = "fsl,fman <<
861 reg = <0x0 0x8c1f000 0 <<
862 little-endian; <<
863 #address-cells = <1>; <<
864 #size-cells = <0>; <<
865 status = "disabled"; <<
866 <<
867 pcs7_0: ethernet-phy@0 <<
868 reg = <0>; <<
869 }; <<
870 <<
871 pcs7_1: ethernet-phy@1 <<
872 reg = <1>; <<
873 }; <<
874 <<
875 pcs7_2: ethernet-phy@2 <<
876 reg = <2>; <<
877 }; <<
878 <<
879 pcs7_3: ethernet-phy@3 <<
880 reg = <3>; <<
881 }; <<
882 }; <<
883 <<
884 cluster1_core0_watchdog: watch <<
885 compatible = "arm,sp80 <<
886 reg = <0x0 0xc000000 0 <<
887 clocks = <&clockgen QO <<
888 QO <<
889 <&clockgen QO <<
890 QO <<
891 clock-names = "wdog_cl <<
892 }; <<
893 <<
894 cluster1_core1_watchdog: watch <<
895 compatible = "arm,sp80 <<
896 reg = <0x0 0xc010000 0 <<
897 clocks = <&clockgen QO <<
898 QO <<
899 <&clockgen QO <<
900 QO <<
901 clock-names = "wdog_cl <<
902 }; <<
903 <<
904 cluster1_core2_watchdog: watch <<
905 compatible = "arm,sp80 <<
906 reg = <0x0 0xc020000 0 <<
907 clocks = <&clockgen QO <<
908 QO <<
909 <&clockgen QO <<
910 QO <<
911 clock-names = "wdog_cl <<
912 }; <<
913 <<
914 cluster1_core3_watchdog: watch <<
915 compatible = "arm,sp80 <<
916 reg = <0x0 0xc030000 0 <<
917 clocks = <&clockgen QO <<
918 QO <<
919 <&clockgen QO <<
920 QO <<
921 clock-names = "wdog_cl <<
922 }; <<
923 <<
924 cluster2_core0_watchdog: watch <<
925 compatible = "arm,sp80 <<
926 reg = <0x0 0xc100000 0 <<
927 clocks = <&clockgen QO <<
928 QO <<
929 <&clockgen QO <<
930 QO <<
931 clock-names = "wdog_cl <<
932 }; <<
933 <<
934 cluster2_core1_watchdog: watch <<
935 compatible = "arm,sp80 <<
936 reg = <0x0 0xc110000 0 <<
937 clocks = <&clockgen QO <<
938 QO <<
939 <&clockgen QO <<
940 QO <<
941 clock-names = "wdog_cl <<
942 }; <<
943 <<
944 cluster2_core2_watchdog: watch <<
945 compatible = "arm,sp80 <<
946 reg = <0x0 0xc120000 0 <<
947 clocks = <&clockgen QO <<
948 QO <<
949 <&clockgen QO <<
950 QO <<
951 clock-names = "wdog_cl <<
952 }; <<
953 <<
954 cluster2_core3_watchdog: watch <<
955 compatible = "arm,sp80 <<
956 reg = <0x0 0xc130000 0 <<
957 clocks = <&clockgen QO <<
958 QO <<
959 <&clockgen QO <<
960 QO <<
961 clock-names = "wdog_cl <<
962 }; <<
963 <<
964 fsl_mc: fsl-mc@80c000000 { <<
965 compatible = "fsl,qori <<
966 reg = <0x00000008 0x0c <<
967 <0x00000000 0x08 <<
968 msi-parent = <&its 0>; <<
969 iommu-map = <0 &smmu 0 <<
970 dma-coherent; <<
971 #address-cells = <3>; <<
972 #size-cells = <1>; <<
973 <<
974 /* <<
975 * Region type 0x0 - M <<
976 * Region type 0x1 - Q <<
977 */ <<
978 ranges = <0x0 0x0 0x0 <<
979 0x1 0x0 0x0 <<
980 <<
981 dpmacs { <<
982 #address-cells <<
983 #size-cells = <<
984 <<
985 dpmac1: ethern <<
986 compat <<
987 reg = <<
988 }; <<
989 <<
990 dpmac2: ethern <<
991 compat <<
992 reg = <<
993 }; <<
994 <<
995 dpmac3: ethern <<
996 compat <<
997 reg = <<
998 }; <<
999 <<
1000 dpmac4: ether <<
1001 compa <<
1002 reg = <<
1003 }; <<
1004 <<
1005 dpmac5: ether <<
1006 compa <<
1007 reg = <<
1008 }; <<
1009 <<
1010 dpmac6: ether <<
1011 compa <<
1012 reg = <<
1013 }; <<
1014 <<
1015 dpmac7: ether <<
1016 compa <<
1017 reg = <<
1018 }; <<
1019 <<
1020 dpmac8: ether <<
1021 compa <<
1022 reg = <<
1023 }; <<
1024 <<
1025 dpmac9: ether <<
1026 compa <<
1027 reg = <<
1028 }; <<
1029 <<
1030 dpmac10: ethe <<
1031 compa <<
1032 reg = <<
1033 }; <<
1034 }; <<
1035 }; <<
1036 <<
1037 rcpm: wakeup-controller@1e340 <<
1038 compatible = "fsl,ls1 <<
1039 reg = <0x0 0x1e34040 <<
1040 #fsl,rcpm-wakeup-cell <<
1041 little-endian; <<
1042 }; <<
1043 <<
1044 ftm_alarm0: rtc@2800000 { <<
1045 compatible = "fsl,ls1 <<
1046 reg = <0x0 0x2800000 <<
1047 fsl,rcpm-wakeup = <&r <<
1048 interrupts = <GIC_SPI <<
1049 }; <<
1050 }; 437 };
1051 438
1052 firmware { <<
1053 optee { <<
1054 compatible = "linaro, <<
1055 method = "smc"; <<
1056 }; <<
1057 }; <<
1058 }; 439 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.