1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (C) 2023 Marek Vasut <marex@denx.d
4 *
5 * DHCOM iMX8MP variant:
6 * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-
7 * DHCOM PCB number: 660-100 or newer
8 * PDK3 PCB number: 669-100 or newer
9 */
10
11 /dts-v1/;
12
13 #include <dt-bindings/leds/common.h>
14 #include <dt-bindings/phy/phy-imx8-pcie.h>
15 #include "imx8mp-dhcom-som.dtsi"
16
17 / {
18 model = "DH electronics i.MX8M Plus DH
19 compatible = "dh,imx8mp-dhcom-pdk3", "
20 "fsl,imx8mp";
21
22 chosen {
23 stdout-path = &uart1;
24 };
25
26 clk_ext_audio_codec: clock-codec {
27 compatible = "fixed-clock";
28 #clock-cells = <0>;
29 clock-frequency = <24000000>;
30 };
31
32 clk_xtal25: clock-xtal25 {
33 compatible = "fixed-clock";
34 #clock-cells = <0>;
35 clock-frequency = <25000000>;
36 };
37
38 gpio-keys {
39 compatible = "gpio-keys";
40
41 button-0 {
42 gpios = <&gpio1 9 GPIO
43 label = "TA1-GPIO-A";
44 linux,code = <KEY_A>;
45 pinctrl-0 = <&pinctrl_
46 pinctrl-names = "defau
47 wakeup-source;
48 };
49
50 button-1 {
51 gpios = <&gpio1 8 GPIO
52 label = "TA2-GPIO-B";
53 linux,code = <KEY_B>;
54 pinctrl-0 = <&pinctrl_
55 pinctrl-names = "defau
56 wakeup-source;
57 };
58
59 button-2 {
60 gpios = <&gpio5 2 GPIO
61 label = "TA3-GPIO-C";
62 linux,code = <KEY_C>;
63 pinctrl-0 = <&pinctrl_
64 pinctrl-names = "defau
65 wakeup-source;
66 };
67
68 button-3 {
69 gpios = <&gpio5 22 GPI
70 label = "TA4-GPIO-E";
71 linux,code = <KEY_E>;
72 pinctrl-0 = <&pinctrl_
73 pinctrl-names = "defau
74 wakeup-source;
75 };
76 };
77
78 hdmi-connector {
79 compatible = "hdmi-connector";
80 label = "X28";
81 type = "a";
82
83 port {
84 hdmi_connector_in: end
85 remote-endpoin
86 };
87 };
88 };
89
90 led {
91 compatible = "gpio-leds";
92
93 led-0 {
94 color = <LED_COLOR_ID_
95 default-state = "off";
96 function = LED_FUNCTIO
97 function-enumerator =
98 gpios = <&gpio4 27 GPI
99 pinctrl-0 = <&pinctrl_
100 pinctrl-names = "defau
101 };
102
103 led-1 {
104 color = <LED_COLOR_ID_
105 default-state = "off";
106 function = LED_FUNCTIO
107 function-enumerator =
108 gpios = <&gpio5 23 GPI
109 pinctrl-0 = <&pinctrl_
110 pinctrl-names = "defau
111 };
112
113 led-2 {
114 color = <LED_COLOR_ID_
115 default-state = "off";
116 function = LED_FUNCTIO
117 function-enumerator =
118 gpios = <&gpio1 0 GPIO
119 pinctrl-0 = <&pinctrl_
120 pinctrl-names = "defau
121 };
122
123 led-3 {
124 color = <LED_COLOR_ID_
125 default-state = "off";
126 function = LED_FUNCTIO
127 function-enumerator =
128 gpios = <&gpio1 5 GPIO
129 pinctrl-0 = <&pinctrl_
130 pinctrl-names = "defau
131 };
132 };
133
134 reg_3p3vdd: regulator-3p3vdd { /* 3.3
135 compatible = "regulator-fixed"
136 regulator-always-on;
137 regulator-min-microvolt = <330
138 regulator-max-microvolt = <330
139 regulator-name = "3P3VDD";
140 };
141
142 sound {
143 compatible = "simple-audio-car
144 simple-audio-card,name = "SGTL
145 simple-audio-card,format = "i2
146 simple-audio-card,bitclock-mas
147 simple-audio-card,frame-master
148 simple-audio-card,widgets = "H
149 simple-audio-card,routing = "H
150
151 cpu_dai: simple-audio-card,cpu
152 sound-dai = <&sai3>;
153 };
154
155 codec_dai: simple-audio-card,c
156 sound-dai = <&sgtl5000
157 };
158 };
159 };
160
161 &i2c5 {
162 i2c-mux@70 {
163 compatible = "nxp,pca9540";
164 reg = <0x70>;
165 #address-cells = <1>;
166 #size-cells = <0>;
167
168 i2cmuxed0: i2c@0 {
169 #address-cells = <1>;
170 #size-cells = <0>;
171 reg = <0>;
172
173 sgtl5000: codec@a {
174 compatible = "
175 reg = <0x0a>;
176 #sound-dai-cel
177 clocks = <&clk
178 VDDA-supply =
179 VDDIO-supply =
180 };
181
182 csi2exp: gpio@24 {
183 compatible = "
184 reg = <0x24>;
185 gpio-controlle
186 #gpio-cells =
187 gpio-line-name
188 "CSI2_
189 "CSI_#
190 };
191
192 typec@3d {
193 compatible = "
194 reg = <0x3d>;
195 interrupt-pare
196 interrupts = <
197 pinctrl-names
198 pinctrl-0 = <&
199
200 port {
201
202 ptn515
203
204 };
205 };
206 };
207
208 power-sensor@40 {
209 compatible = "
210 reg = <0x40>;
211 shunt-resistor
212 ti,shunt-gain
213 };
214
215 eeprom_board: eeprom@5
216 compatible = "
217 pagesize = <16
218 reg = <0x54>;
219 };
220
221 pcieclk: clock@6b {
222 compatible = "
223 reg = <0x6b>;
224 clocks = <&clk
225 #clock-cells =
226 };
227 };
228
229 i2cmuxed1: i2c@1 { /* HDM
230 #address-cells = <1>;
231 #size-cells = <0>;
232 reg = <1>;
233 };
234 };
235 };
236
237 &fec { /* Second ethernet */
238 pinctrl-0 = <&pinctrl_fec_rgmii>;
239 phy-handle = <ðphypdk>;
240 phy-mode = "rgmii-id";
241
242 mdio {
243 ethphypdk: ethernet-phy@7 { /*
244 compatible = "ethernet
245 "ethernet
246 interrupt-parent = <&g
247 interrupts = <3 IRQ_TY
248 pinctrl-0 = <&pinctrl_
249 pinctrl-names = "defau
250 reg = <7>;
251 reset-assert-us = <100
252 /* RESET_N signal rise
253 reset-deassert-us = <1
254 reset-gpios = <&gpio4
255 };
256 };
257 };
258
259 &flexcan1 {
260 status = "okay";
261 };
262
263 &hdmi_pvi {
264 status = "okay";
265 };
266
267 &hdmi_tx {
268 ddc-i2c-bus = <&i2cmuxed1>;
269 pinctrl-names = "default";
270 pinctrl-0 = <&pinctrl_hdmi>;
271 status = "okay";
272
273 ports {
274 port@1 {
275 hdmi_tx_out: endpoint
276 remote-endpoin
277 };
278 };
279 };
280 };
281
282 &hdmi_tx_phy {
283 status = "okay";
284 };
285
286 &lcdif3 {
287 status = "okay";
288 };
289
290 &pcie_phy {
291 clocks = <&pcieclk 1>;
292 clock-names = "ref";
293 fsl,refclk-pad-mode = <IMX8_PCIE_REFCL
294 status = "okay";
295 };
296
297 &pcie {
298 fsl,max-link-speed = <3>;
299 reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW
300 status = "okay";
301 };
302
303 &sai3 {
304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_sai3>;
306 assigned-clocks = <&clk IMX8MP_CLK_SAI
307 assigned-clock-parents = <&clk IMX8MP_
308 assigned-clock-rates = <12288000>;
309 fsl,sai-mclk-direction-output;
310 status = "okay";
311 };
312
313 &usb_dwc3_0 {
314 usb-role-switch;
315
316 port {
317 dwc3_0_ep: endpoint {
318 remote-endpoint = <&pt
319 };
320 };
321 };
322
323 &usb3_1 {
324 fsl,disable-port-power-control;
325 fsl,permanently-attached;
326 };
327
328 &usb_dwc3_1 {
329 /* This port has USB5734 Hub connected
330 /delete-property/ pinctrl-names;
331 /delete-property/ pinctrl-0;
332 };
333
334 &iomuxc {
335 /*
336 * GPIO_A,B,C,E are connected to butto
337 * GPIO_D,F,G,I are connected to LEDs.
338 * GPIO_H is connected to USB Hub RESE
339 * GPIO_M is connected to CLKOUT2.
340 */
341 pinctrl-0 = <&pinctrl_hog_base
342 &pinctrl_dhcom_h &pinctrl
343 &pinctrl_dhcom_l
344 &pinctrl_dhcom_int>;
345
346 pinctrl_ptn5150: ptn5150grp {
347 fsl,pins = <
348 MX8MP_IOMUXC_SAI2_TXC_
349 >;
350 };
351 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.