1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (C) 2023 Marek Vasut <marex@denx.d 3 * Copyright (C) 2023 Marek Vasut <marex@denx.de>
4 * 4 *
5 * DHCOM iMX8MP variant: 5 * DHCOM iMX8MP variant:
6 * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2- 6 * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
7 * DHCOM PCB number: 660-100 or newer 7 * DHCOM PCB number: 660-100 or newer
8 * PDK3 PCB number: 669-100 or newer 8 * PDK3 PCB number: 669-100 or newer
9 */ 9 */
10 10
11 /dts-v1/; 11 /dts-v1/;
12 12
13 #include <dt-bindings/leds/common.h> 13 #include <dt-bindings/leds/common.h>
14 #include <dt-bindings/phy/phy-imx8-pcie.h> 14 #include <dt-bindings/phy/phy-imx8-pcie.h>
15 #include "imx8mp-dhcom-som.dtsi" 15 #include "imx8mp-dhcom-som.dtsi"
16 16
17 / { 17 / {
18 model = "DH electronics i.MX8M Plus DH 18 model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
19 compatible = "dh,imx8mp-dhcom-pdk3", " 19 compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
20 "fsl,imx8mp"; 20 "fsl,imx8mp";
21 21
22 chosen { 22 chosen {
23 stdout-path = &uart1; 23 stdout-path = &uart1;
24 }; 24 };
25 25
26 clk_ext_audio_codec: clock-codec { 26 clk_ext_audio_codec: clock-codec {
27 compatible = "fixed-clock"; 27 compatible = "fixed-clock";
28 #clock-cells = <0>; 28 #clock-cells = <0>;
29 clock-frequency = <24000000>; 29 clock-frequency = <24000000>;
30 }; 30 };
31 31
32 clk_xtal25: clock-xtal25 { 32 clk_xtal25: clock-xtal25 {
33 compatible = "fixed-clock"; 33 compatible = "fixed-clock";
34 #clock-cells = <0>; 34 #clock-cells = <0>;
35 clock-frequency = <25000000>; 35 clock-frequency = <25000000>;
36 }; 36 };
37 37
38 gpio-keys { 38 gpio-keys {
39 compatible = "gpio-keys"; 39 compatible = "gpio-keys";
40 40
41 button-0 { 41 button-0 {
42 gpios = <&gpio1 9 GPIO 42 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
43 label = "TA1-GPIO-A"; 43 label = "TA1-GPIO-A";
44 linux,code = <KEY_A>; 44 linux,code = <KEY_A>;
45 pinctrl-0 = <&pinctrl_ 45 pinctrl-0 = <&pinctrl_dhcom_a>;
46 pinctrl-names = "defau 46 pinctrl-names = "default";
47 wakeup-source; 47 wakeup-source;
48 }; 48 };
49 49
50 button-1 { 50 button-1 {
51 gpios = <&gpio1 8 GPIO 51 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
52 label = "TA2-GPIO-B"; 52 label = "TA2-GPIO-B";
53 linux,code = <KEY_B>; 53 linux,code = <KEY_B>;
54 pinctrl-0 = <&pinctrl_ 54 pinctrl-0 = <&pinctrl_dhcom_b>;
55 pinctrl-names = "defau 55 pinctrl-names = "default";
56 wakeup-source; 56 wakeup-source;
57 }; 57 };
58 58
59 button-2 { 59 button-2 {
60 gpios = <&gpio5 2 GPIO 60 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
61 label = "TA3-GPIO-C"; 61 label = "TA3-GPIO-C";
62 linux,code = <KEY_C>; 62 linux,code = <KEY_C>;
63 pinctrl-0 = <&pinctrl_ 63 pinctrl-0 = <&pinctrl_dhcom_c>;
64 pinctrl-names = "defau 64 pinctrl-names = "default";
65 wakeup-source; 65 wakeup-source;
66 }; 66 };
67 67
68 button-3 { 68 button-3 {
69 gpios = <&gpio5 22 GPI 69 gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
70 label = "TA4-GPIO-E"; 70 label = "TA4-GPIO-E";
71 linux,code = <KEY_E>; 71 linux,code = <KEY_E>;
72 pinctrl-0 = <&pinctrl_ 72 pinctrl-0 = <&pinctrl_dhcom_e>;
73 pinctrl-names = "defau 73 pinctrl-names = "default";
74 wakeup-source; 74 wakeup-source;
75 }; 75 };
76 }; 76 };
77 77
78 hdmi-connector { 78 hdmi-connector {
79 compatible = "hdmi-connector"; 79 compatible = "hdmi-connector";
80 label = "X28"; 80 label = "X28";
81 type = "a"; 81 type = "a";
82 82
83 port { 83 port {
84 hdmi_connector_in: end 84 hdmi_connector_in: endpoint {
85 remote-endpoin 85 remote-endpoint = <&hdmi_tx_out>;
86 }; 86 };
87 }; 87 };
88 }; 88 };
89 89
90 led { 90 led {
91 compatible = "gpio-leds"; 91 compatible = "gpio-leds";
92 92
93 led-0 { 93 led-0 {
94 color = <LED_COLOR_ID_ 94 color = <LED_COLOR_ID_GREEN>;
95 default-state = "off"; 95 default-state = "off";
96 function = LED_FUNCTIO 96 function = LED_FUNCTION_INDICATOR;
97 function-enumerator = 97 function-enumerator = <0>;
98 gpios = <&gpio4 27 GPI 98 gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
99 pinctrl-0 = <&pinctrl_ 99 pinctrl-0 = <&pinctrl_dhcom_d>;
100 pinctrl-names = "defau 100 pinctrl-names = "default";
101 }; 101 };
102 102
103 led-1 { 103 led-1 {
104 color = <LED_COLOR_ID_ 104 color = <LED_COLOR_ID_GREEN>;
105 default-state = "off"; 105 default-state = "off";
106 function = LED_FUNCTIO 106 function = LED_FUNCTION_INDICATOR;
107 function-enumerator = 107 function-enumerator = <1>;
108 gpios = <&gpio5 23 GPI 108 gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
109 pinctrl-0 = <&pinctrl_ 109 pinctrl-0 = <&pinctrl_dhcom_f>;
110 pinctrl-names = "defau 110 pinctrl-names = "default";
111 }; 111 };
112 112
113 led-2 { 113 led-2 {
114 color = <LED_COLOR_ID_ 114 color = <LED_COLOR_ID_GREEN>;
115 default-state = "off"; 115 default-state = "off";
116 function = LED_FUNCTIO 116 function = LED_FUNCTION_INDICATOR;
117 function-enumerator = 117 function-enumerator = <2>;
118 gpios = <&gpio1 0 GPIO 118 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
119 pinctrl-0 = <&pinctrl_ 119 pinctrl-0 = <&pinctrl_dhcom_g>;
120 pinctrl-names = "defau 120 pinctrl-names = "default";
121 }; 121 };
122 122
123 led-3 { 123 led-3 {
124 color = <LED_COLOR_ID_ 124 color = <LED_COLOR_ID_GREEN>;
125 default-state = "off"; 125 default-state = "off";
126 function = LED_FUNCTIO 126 function = LED_FUNCTION_INDICATOR;
127 function-enumerator = 127 function-enumerator = <3>;
128 gpios = <&gpio1 5 GPIO 128 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
129 pinctrl-0 = <&pinctrl_ 129 pinctrl-0 = <&pinctrl_dhcom_i>;
130 pinctrl-names = "defau 130 pinctrl-names = "default";
131 }; 131 };
132 }; 132 };
133 133
134 reg_3p3vdd: regulator-3p3vdd { /* 3.3 134 reg_3p3vdd: regulator-3p3vdd { /* 3.3VDD */
135 compatible = "regulator-fixed" 135 compatible = "regulator-fixed";
136 regulator-always-on; 136 regulator-always-on;
137 regulator-min-microvolt = <330 137 regulator-min-microvolt = <3300000>;
138 regulator-max-microvolt = <330 138 regulator-max-microvolt = <3300000>;
139 regulator-name = "3P3VDD"; 139 regulator-name = "3P3VDD";
140 }; 140 };
141 141
142 sound { 142 sound {
143 compatible = "simple-audio-car 143 compatible = "simple-audio-card";
144 simple-audio-card,name = "SGTL 144 simple-audio-card,name = "SGTL5000-Card";
145 simple-audio-card,format = "i2 145 simple-audio-card,format = "i2s";
146 simple-audio-card,bitclock-mas 146 simple-audio-card,bitclock-master = <&codec_dai>;
147 simple-audio-card,frame-master 147 simple-audio-card,frame-master = <&codec_dai>;
148 simple-audio-card,widgets = "H 148 simple-audio-card,widgets = "Headphone", "Headphone Jack";
149 simple-audio-card,routing = "H 149 simple-audio-card,routing = "Headphone Jack", "HP_OUT";
150 150
151 cpu_dai: simple-audio-card,cpu 151 cpu_dai: simple-audio-card,cpu {
152 sound-dai = <&sai3>; 152 sound-dai = <&sai3>;
153 }; 153 };
154 154
155 codec_dai: simple-audio-card,c 155 codec_dai: simple-audio-card,codec {
156 sound-dai = <&sgtl5000 156 sound-dai = <&sgtl5000>;
157 }; 157 };
158 }; 158 };
159 }; 159 };
160 160
161 &i2c5 { 161 &i2c5 {
162 i2c-mux@70 { 162 i2c-mux@70 {
163 compatible = "nxp,pca9540"; 163 compatible = "nxp,pca9540";
164 reg = <0x70>; 164 reg = <0x70>;
165 #address-cells = <1>; 165 #address-cells = <1>;
166 #size-cells = <0>; 166 #size-cells = <0>;
167 167
168 i2cmuxed0: i2c@0 { 168 i2cmuxed0: i2c@0 {
169 #address-cells = <1>; 169 #address-cells = <1>;
170 #size-cells = <0>; 170 #size-cells = <0>;
171 reg = <0>; 171 reg = <0>;
172 172
173 sgtl5000: codec@a { 173 sgtl5000: codec@a {
174 compatible = " 174 compatible = "fsl,sgtl5000";
175 reg = <0x0a>; 175 reg = <0x0a>;
176 #sound-dai-cel 176 #sound-dai-cells = <0>;
177 clocks = <&clk 177 clocks = <&clk_ext_audio_codec>;
178 VDDA-supply = 178 VDDA-supply = <®_3p3vdd>;
179 VDDIO-supply = 179 VDDIO-supply = <®_vdd_3p3v_awo>;
180 }; 180 };
181 181
182 csi2exp: gpio@24 { 182 csi2exp: gpio@24 {
183 compatible = " 183 compatible = "nxp,pca9570";
184 reg = <0x24>; 184 reg = <0x24>;
185 gpio-controlle 185 gpio-controller;
186 #gpio-cells = 186 #gpio-cells = <2>;
187 gpio-line-name 187 gpio-line-names =
188 "CSI2_ 188 "CSI2_#RESET", "CSI2_#PWDN",
189 "CSI_# 189 "CSI_#PWDN", "CSI_#RESET";
190 }; 190 };
191 191
192 typec@3d { 192 typec@3d {
193 compatible = " 193 compatible = "nxp,ptn5150";
194 reg = <0x3d>; 194 reg = <0x3d>;
195 interrupt-pare 195 interrupt-parent = <&gpio4>;
196 interrupts = < 196 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
197 pinctrl-names 197 pinctrl-names = "default";
198 pinctrl-0 = <& 198 pinctrl-0 = <&pinctrl_ptn5150>;
199 199
200 port { 200 port {
201 201
202 ptn515 202 ptn5150_out_ep: endpoint {
203 203 remote-endpoint = <&dwc3_0_ep>;
204 }; 204 };
205 }; 205 };
206 }; 206 };
207 207
208 power-sensor@40 { 208 power-sensor@40 {
209 compatible = " 209 compatible = "ti,ina238";
210 reg = <0x40>; 210 reg = <0x40>;
211 shunt-resistor 211 shunt-resistor = <20000>; /* 0.02 R */
212 ti,shunt-gain 212 ti,shunt-gain = <1>; /* Drop cca. 40mV */
213 }; 213 };
214 214
215 eeprom_board: eeprom@5 215 eeprom_board: eeprom@54 {
216 compatible = " 216 compatible = "atmel,24c04";
217 pagesize = <16 217 pagesize = <16>;
218 reg = <0x54>; 218 reg = <0x54>;
219 }; 219 };
220 220
221 pcieclk: clock@6b { 221 pcieclk: clock@6b {
222 compatible = " 222 compatible = "skyworks,si52144";
223 reg = <0x6b>; 223 reg = <0x6b>;
224 clocks = <&clk 224 clocks = <&clk_xtal25>;
225 #clock-cells = 225 #clock-cells = <1>;
226 }; 226 };
227 }; 227 };
228 228
229 i2cmuxed1: i2c@1 { /* HDM 229 i2cmuxed1: i2c@1 { /* HDMI DDC I2C */
230 #address-cells = <1>; 230 #address-cells = <1>;
231 #size-cells = <0>; 231 #size-cells = <0>;
232 reg = <1>; 232 reg = <1>;
233 }; 233 };
234 }; 234 };
235 }; 235 };
236 236
237 &fec { /* Second ethernet */ 237 &fec { /* Second ethernet */
238 pinctrl-0 = <&pinctrl_fec_rgmii>; 238 pinctrl-0 = <&pinctrl_fec_rgmii>;
239 phy-handle = <ðphypdk>; 239 phy-handle = <ðphypdk>;
240 phy-mode = "rgmii-id"; 240 phy-mode = "rgmii-id";
241 241
242 mdio { 242 mdio {
243 ethphypdk: ethernet-phy@7 { /* 243 ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
244 compatible = "ethernet 244 compatible = "ethernet-phy-id0022.1642",
245 "ethernet 245 "ethernet-phy-ieee802.3-c22";
246 interrupt-parent = <&g 246 interrupt-parent = <&gpio4>;
247 interrupts = <3 IRQ_TY 247 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
248 pinctrl-0 = <&pinctrl_ 248 pinctrl-0 = <&pinctrl_ethphy1>;
249 pinctrl-names = "defau 249 pinctrl-names = "default";
250 reg = <7>; 250 reg = <7>;
251 reset-assert-us = <100 251 reset-assert-us = <1000>;
252 /* RESET_N signal rise 252 /* RESET_N signal rise time ~100ms */
253 reset-deassert-us = <1 253 reset-deassert-us = <120000>;
254 reset-gpios = <&gpio4 254 reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
255 }; 255 };
256 }; 256 };
257 }; 257 };
258 258
259 &flexcan1 { 259 &flexcan1 {
260 status = "okay"; 260 status = "okay";
261 }; 261 };
262 262
263 &hdmi_pvi { 263 &hdmi_pvi {
264 status = "okay"; 264 status = "okay";
265 }; 265 };
266 266
267 &hdmi_tx { 267 &hdmi_tx {
268 ddc-i2c-bus = <&i2cmuxed1>; 268 ddc-i2c-bus = <&i2cmuxed1>;
269 pinctrl-names = "default"; 269 pinctrl-names = "default";
270 pinctrl-0 = <&pinctrl_hdmi>; 270 pinctrl-0 = <&pinctrl_hdmi>;
271 status = "okay"; 271 status = "okay";
272 272
273 ports { 273 ports {
274 port@1 { 274 port@1 {
275 hdmi_tx_out: endpoint 275 hdmi_tx_out: endpoint {
276 remote-endpoin 276 remote-endpoint = <&hdmi_connector_in>;
277 }; 277 };
278 }; 278 };
279 }; 279 };
280 }; 280 };
281 281
282 &hdmi_tx_phy { 282 &hdmi_tx_phy {
283 status = "okay"; 283 status = "okay";
284 }; 284 };
285 285
286 &lcdif3 { 286 &lcdif3 {
287 status = "okay"; 287 status = "okay";
288 }; 288 };
289 289
290 &pcie_phy { 290 &pcie_phy {
291 clocks = <&pcieclk 1>; 291 clocks = <&pcieclk 1>;
292 clock-names = "ref"; 292 clock-names = "ref";
293 fsl,refclk-pad-mode = <IMX8_PCIE_REFCL 293 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
294 status = "okay"; 294 status = "okay";
295 }; 295 };
296 296
297 &pcie { 297 &pcie {
298 fsl,max-link-speed = <3>; 298 fsl,max-link-speed = <3>;
299 reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW 299 reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
300 status = "okay"; 300 status = "okay";
301 }; 301 };
302 302
303 &sai3 { 303 &sai3 {
304 pinctrl-names = "default"; 304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_sai3>; 305 pinctrl-0 = <&pinctrl_sai3>;
306 assigned-clocks = <&clk IMX8MP_CLK_SAI 306 assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
307 assigned-clock-parents = <&clk IMX8MP_ 307 assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
308 assigned-clock-rates = <12288000>; 308 assigned-clock-rates = <12288000>;
309 fsl,sai-mclk-direction-output; 309 fsl,sai-mclk-direction-output;
310 status = "okay"; 310 status = "okay";
311 }; 311 };
312 312
313 &usb_dwc3_0 { 313 &usb_dwc3_0 {
314 usb-role-switch; 314 usb-role-switch;
315 315
316 port { 316 port {
317 dwc3_0_ep: endpoint { 317 dwc3_0_ep: endpoint {
318 remote-endpoint = <&pt 318 remote-endpoint = <&ptn5150_out_ep>;
319 }; 319 };
320 }; 320 };
321 }; 321 };
322 322
323 &usb3_1 { 323 &usb3_1 {
324 fsl,disable-port-power-control; 324 fsl,disable-port-power-control;
325 fsl,permanently-attached; 325 fsl,permanently-attached;
326 }; 326 };
327 327
328 &usb_dwc3_1 { 328 &usb_dwc3_1 {
329 /* This port has USB5734 Hub connected 329 /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
330 /delete-property/ pinctrl-names; 330 /delete-property/ pinctrl-names;
331 /delete-property/ pinctrl-0; 331 /delete-property/ pinctrl-0;
332 }; 332 };
333 333
334 &iomuxc { 334 &iomuxc {
335 /* 335 /*
336 * GPIO_A,B,C,E are connected to butto 336 * GPIO_A,B,C,E are connected to buttons.
337 * GPIO_D,F,G,I are connected to LEDs. 337 * GPIO_D,F,G,I are connected to LEDs.
338 * GPIO_H is connected to USB Hub RESE 338 * GPIO_H is connected to USB Hub RESET_N.
339 * GPIO_M is connected to CLKOUT2. 339 * GPIO_M is connected to CLKOUT2.
340 */ 340 */
341 pinctrl-0 = <&pinctrl_hog_base 341 pinctrl-0 = <&pinctrl_hog_base
342 &pinctrl_dhcom_h &pinctrl 342 &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
343 &pinctrl_dhcom_l 343 &pinctrl_dhcom_l
344 &pinctrl_dhcom_int>; 344 &pinctrl_dhcom_int>;
345 345
346 pinctrl_ptn5150: ptn5150grp { 346 pinctrl_ptn5150: ptn5150grp {
347 fsl,pins = < 347 fsl,pins = <
348 MX8MP_IOMUXC_SAI2_TXC_ 348 MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000
349 >; 349 >;
350 }; 350 };
351 }; 351 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.