1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright 2024 NXP
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/usb/pd.h>
9 #include "imx93.dtsi"
10
11 / {
12 model = "NXP i.MX93 14X14 EVK board";
13 compatible = "fsl,imx93-14x14-evk", "f
14
15 chosen {
16 stdout-path = &lpuart1;
17 };
18
19 reserved-memory {
20 #address-cells = <2>;
21 #size-cells = <2>;
22 ranges;
23
24 linux,cma {
25 compatible = "shared-d
26 reusable;
27 alloc-ranges = <0 0x80
28 size = <0 0x10000000>;
29 linux,cma-default;
30 };
31
32 vdev0vring0: vdev0vring0@a4000
33 reg = <0 0xa4000000 0
34 no-map;
35 };
36
37 vdev0vring1: vdev0vring1@a4008
38 reg = <0 0xa4008000 0
39 no-map;
40 };
41
42 vdev1vring0: vdev1vring0@a4010
43 reg = <0 0xa4010000 0
44 no-map;
45 };
46
47 vdev1vring1: vdev1vring1@a4018
48 reg = <0 0xa4018000 0
49 no-map;
50 };
51
52 rsc_table: rsc-table@2021e000
53 reg = <0 0x2021e000 0
54 no-map;
55 };
56
57 vdevbuffer: vdevbuffer@a402000
58 compatible = "shared-d
59 reg = <0 0xa4020000 0
60 no-map;
61 };
62 };
63
64 reg_can1_stby: regulator-can1-stby {
65 compatible = "regulator-fixed"
66 regulator-name = "can1-stby";
67 regulator-min-microvolt = <330
68 regulator-max-microvolt = <330
69 gpio = <&pcal6524_2 10 GPIO_AC
70 enable-active-high;
71 vin-supply = <®_can1_en>;
72 };
73
74 reg_can1_en: regulator-can1-en {
75 compatible = "regulator-fixed"
76 regulator-name = "can1-en";
77 regulator-min-microvolt = <330
78 regulator-max-microvolt = <330
79 gpio = <&pcal6524_2 12 GPIO_AC
80 enable-active-high;
81 };
82
83 reg_can2_stby: regulator-can2-stby {
84 compatible = "regulator-fixed"
85 regulator-name = "can2-stby";
86 regulator-min-microvolt = <330
87 regulator-max-microvolt = <330
88 gpio = <&pcal6524_2 11 GPIO_AC
89 enable-active-high;
90 vin-supply = <®_can2_en>;
91 };
92
93 reg_can2_en: regulator-can2-en {
94 compatible = "regulator-fixed"
95 regulator-name = "can2-en";
96 regulator-min-microvolt = <330
97 regulator-max-microvolt = <330
98 gpio = <&pcal6524_2 13 GPIO_AC
99 enable-active-high;
100 };
101
102 reg_usdhc2_vmmc: regulator-usdhc2 {
103 compatible = "regulator-fixed"
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_reg_usdh
106 regulator-name = "VSD_3V3";
107 regulator-min-microvolt = <330
108 regulator-max-microvolt = <330
109 gpio = <&gpio3 7 GPIO_ACTIVE_H
110 enable-active-high;
111 off-on-delay-us = <12000>;
112 };
113
114 reg_vdd_12v: regulator-vdd-12v {
115 compatible = "regulator-fixed"
116 regulator-name = "reg_vdd_12v"
117 regulator-min-microvolt = <120
118 regulator-max-microvolt = <120
119 gpio = <&pcal6524 14 GPIO_ACTI
120 enable-active-high;
121 };
122
123 reg_vref_1v8: regulator-adc-vref {
124 compatible = "regulator-fixed"
125 regulator-name = "vref_1v8";
126 regulator-min-microvolt = <180
127 regulator-max-microvolt = <180
128 };
129 };
130
131 &adc1 {
132 vref-supply = <®_vref_1v8>;
133 status = "okay";
134 };
135
136 &cm33 {
137 mbox-names = "tx", "rx", "rxdb";
138 mboxes = <&mu1 0 1>,
139 <&mu1 1 1>,
140 <&mu1 3 1>;
141 memory-region = <&vdevbuffer>, <&vdev0
142 <&vdev1vring0>, <&vdev
143 status = "okay";
144 };
145
146 &fec {
147 pinctrl-names = "default";
148 pinctrl-0 = <&pinctrl_fec>;
149 phy-mode = "rgmii-id";
150 phy-handle = <ðphy2>;
151 fsl,magic-packet;
152 status = "okay";
153
154 mdio {
155 #address-cells = <1>;
156 #size-cells = <0>;
157 clock-frequency = <5000000>;
158
159 ethphy2: ethernet-phy@2 {
160 compatible = "ethernet
161 reg = <2>;
162 eee-broken-1000t;
163 reset-gpios = <&pcal65
164 reset-assert-us = <100
165 reset-deassert-us = <8
166 realtek,clkout-disable
167 };
168 };
169 };
170
171 &flexcan1 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_flexcan1>;
174 xceiver-supply = <®_can1_stby>;
175 status = "okay";
176 };
177
178 &flexcan2 {
179 pinctrl-names = "default";
180 pinctrl-0 = <&pinctrl_flexcan2>;
181 xceiver-supply = <®_can2_stby>;
182 status = "okay";
183 };
184
185 &lpi2c1 {
186 clock-frequency = <400000>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_lpi2c1>;
189 status = "okay";
190
191 lsm6dsm@6a {
192 compatible = "st,lsm6dso";
193 reg = <0x6a>;
194 };
195 };
196
197 &lpi2c2 {
198 clock-frequency = <400000>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_lpi2c2>;
201 status = "okay";
202
203 pcal6524_2: gpio@20 {
204 compatible = "nxp,pcal6524";
205 reg = <0x20>;
206 gpio-controller;
207 #gpio-cells = <2>;
208 };
209
210 pcal6524: gpio@22 {
211 compatible = "nxp,pcal6524";
212 pinctrl-names = "default";
213 pinctrl-0 = <&pinctrl_pcal6524
214 reg = <0x22>;
215 gpio-controller;
216 #gpio-cells = <2>;
217 interrupt-controller;
218 #interrupt-cells = <2>;
219 interrupt-parent = <&gpio3>;
220 interrupts = <27 IRQ_TYPE_LEVE
221 };
222 };
223
224 &lpi2c3 {
225 clock-frequency = <400000>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&pinctrl_lpi2c3>;
228 status = "okay";
229 };
230
231 &lpuart1 { /* console */
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_uart1>;
234 status = "okay";
235 };
236
237 &mu1 {
238 status = "okay";
239 };
240
241 &mu2 {
242 status = "okay";
243 };
244
245 &usbotg1 {
246 dr_mode = "otg";
247 hnp-disable;
248 srp-disable;
249 adp-disable;
250 disable-over-current;
251 samsung,picophy-pre-emp-curr-control =
252 samsung,picophy-dc-vol-level-adjust =
253 status = "okay";
254 };
255
256 &usbotg2 {
257 dr_mode = "host";
258 disable-over-current;
259 samsung,picophy-pre-emp-curr-control =
260 samsung,picophy-dc-vol-level-adjust =
261 status = "okay";
262 };
263
264 &usdhc1 {
265 pinctrl-names = "default", "state_100m
266 pinctrl-0 = <&pinctrl_usdhc1>;
267 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
268 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
269 bus-width = <8>;
270 non-removable;
271 status = "okay";
272 };
273
274 &usdhc2 {
275 pinctrl-names = "default", "state_100m
276 pinctrl-0 = <&pinctrl_usdhc2>, <&pinct
277 pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
278 pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
279 cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>
280 vmmc-supply = <®_usdhc2_vmmc>;
281 bus-width = <4>;
282 no-mmc;
283 status = "okay";
284 };
285
286 &wdog3 {
287 status = "okay";
288 };
289
290 &iomuxc {
291 pinctrl_flexcan1: flexcan1grp {
292 fsl,pins = <
293 MX93_PAD_PDM_CLK__CAN1
294 MX93_PAD_PDM_BIT_STREA
295 >;
296 };
297
298 pinctrl_flexcan2: flexcan2grp {
299 fsl,pins = <
300 MX93_PAD_GPIO_IO25__CA
301 MX93_PAD_GPIO_IO27__CA
302 >;
303 };
304
305 pinctrl_lpi2c1: lpi2c1grp {
306 fsl,pins = <
307 MX93_PAD_I2C1_SCL__LPI
308 MX93_PAD_I2C1_SDA__LPI
309 >;
310 };
311
312 pinctrl_lpi2c2: lpi2c2grp {
313 fsl,pins = <
314 MX93_PAD_I2C2_SCL__LPI
315 MX93_PAD_I2C2_SDA__LPI
316 >;
317 };
318
319 pinctrl_lpi2c3: lpi2c3grp {
320 fsl,pins = <
321 MX93_PAD_GPIO_IO28__LP
322 MX93_PAD_GPIO_IO29__LP
323 >;
324 };
325
326 pinctrl_pcal6524: pcal6524grp {
327 fsl,pins = <
328 MX93_PAD_CCM_CLKO2__GP
329 >;
330 };
331
332 pinctrl_fec: fecgrp {
333 fsl,pins = <
334 MX93_PAD_ENET2_MDC__EN
335 MX93_PAD_ENET2_MDIO__E
336 MX93_PAD_ENET2_RD0__EN
337 MX93_PAD_ENET2_RD1__EN
338 MX93_PAD_ENET2_RD2__EN
339 MX93_PAD_ENET2_RD3__EN
340 MX93_PAD_ENET2_RXC__EN
341 MX93_PAD_ENET2_RX_CTL_
342 MX93_PAD_ENET2_TD0__EN
343 MX93_PAD_ENET2_TD1__EN
344 MX93_PAD_ENET2_TD2__EN
345 MX93_PAD_ENET2_TD3__EN
346 MX93_PAD_ENET2_TXC__EN
347 MX93_PAD_ENET2_TX_CTL_
348 >;
349 };
350
351 pinctrl_uart1: uart1grp {
352 fsl,pins = <
353 MX93_PAD_UART1_RXD__LP
354 MX93_PAD_UART1_TXD__LP
355 >;
356 };
357
358 pinctrl_uart5: uart5grp {
359 fsl,pins = <
360 MX93_PAD_DAP_TDO_TRACE
361 MX93_PAD_DAP_TDI__LPUA
362 MX93_PAD_DAP_TMS_SWDIO
363 MX93_PAD_DAP_TCLK_SWCL
364 >;
365 };
366
367 /* need to config the SION for data an
368 pinctrl_usdhc1: usdhc1grp {
369 fsl,pins = <
370 MX93_PAD_SD1_CLK__USDH
371 MX93_PAD_SD1_CMD__USDH
372 MX93_PAD_SD1_DATA0__US
373 MX93_PAD_SD1_DATA1__US
374 MX93_PAD_SD1_DATA2__US
375 MX93_PAD_SD1_DATA3__US
376 MX93_PAD_SD1_DATA4__US
377 MX93_PAD_SD1_DATA5__US
378 MX93_PAD_SD1_DATA6__US
379 MX93_PAD_SD1_DATA7__US
380 MX93_PAD_SD1_STROBE__U
381 >;
382 };
383
384 /* need to config the SION for data an
385 pinctrl_usdhc1_100mhz: usdhc1-100mhzgr
386 fsl,pins = <
387 MX93_PAD_SD1_CLK__USDH
388 MX93_PAD_SD1_CMD__USDH
389 MX93_PAD_SD1_DATA0__US
390 MX93_PAD_SD1_DATA1__US
391 MX93_PAD_SD1_DATA2__US
392 MX93_PAD_SD1_DATA3__US
393 MX93_PAD_SD1_DATA4__US
394 MX93_PAD_SD1_DATA5__US
395 MX93_PAD_SD1_DATA6__US
396 MX93_PAD_SD1_DATA7__US
397 MX93_PAD_SD1_STROBE__U
398 >;
399 };
400
401 /* need to config the SION for data an
402 pinctrl_usdhc1_200mhz: usdhc1-200mhzgr
403 fsl,pins = <
404 MX93_PAD_SD1_CLK__USDH
405 MX93_PAD_SD1_CMD__USDH
406 MX93_PAD_SD1_DATA0__US
407 MX93_PAD_SD1_DATA1__US
408 MX93_PAD_SD1_DATA2__US
409 MX93_PAD_SD1_DATA3__US
410 MX93_PAD_SD1_DATA4__US
411 MX93_PAD_SD1_DATA5__US
412 MX93_PAD_SD1_DATA6__US
413 MX93_PAD_SD1_DATA7__US
414 MX93_PAD_SD1_STROBE__U
415 >;
416 };
417
418 pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc
419 fsl,pins = <
420 MX93_PAD_SD2_RESET_B__
421 >;
422 };
423
424 pinctrl_usdhc2_gpio: usdhc2gpiogrp {
425 fsl,pins = <
426 MX93_PAD_SD2_CD_B__GPI
427 >;
428 };
429
430 /* need to config the SION for data an
431 pinctrl_usdhc2: usdhc2grp {
432 fsl,pins = <
433 MX93_PAD_SD2_CLK__USDH
434 MX93_PAD_SD2_CMD__USDH
435 MX93_PAD_SD2_DATA0__US
436 MX93_PAD_SD2_DATA1__US
437 MX93_PAD_SD2_DATA2__US
438 MX93_PAD_SD2_DATA3__US
439 MX93_PAD_SD2_VSELECT__
440 >;
441 };
442
443 /* need to config the SION for data an
444 pinctrl_usdhc2_100mhz: usdhc2-100mhzgr
445 fsl,pins = <
446 MX93_PAD_SD2_CLK__USDH
447 MX93_PAD_SD2_CMD__USDH
448 MX93_PAD_SD2_DATA0__US
449 MX93_PAD_SD2_DATA1__US
450 MX93_PAD_SD2_DATA2__US
451 MX93_PAD_SD2_DATA3__US
452 MX93_PAD_SD2_VSELECT__
453 >;
454 };
455
456 /* need to config the SION for data an
457 pinctrl_usdhc2_200mhz: usdhc2-200mhzgr
458 fsl,pins = <
459 MX93_PAD_SD2_CLK__USDH
460 MX93_PAD_SD2_CMD__USDH
461 MX93_PAD_SD2_DATA0__US
462 MX93_PAD_SD2_DATA1__US
463 MX93_PAD_SD2_DATA2__US
464 MX93_PAD_SD2_DATA3__US
465 MX93_PAD_SD2_VSELECT__
466 >;
467 };
468 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.