1 // SPDX-License-Identifier: (GPL-2.0-or-later
2 /*
3 * Copyright (c) 2022-2023 TQ-Systems GmbH <lin
4 * D-82229 Seefeld, Germany.
5 * Author: Markus Niebel
6 * Author: Alexander Stein
7 */
8 /dts-v1/;
9
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/net/ti-dp83867.h>
13 #include <dt-bindings/pwm/pwm.h>
14
15 #include "imx93-tqma9352.dtsi"
16
17 /{
18 model = "TQ-Systems i.MX93 TQMa93xxLA/
19 compatible = "tq,imx93-tqma9352-mba93x
20 "tq,imx93-tqma9352", "fsl
21 chassis-type = "embedded";
22
23 chosen {
24 stdout-path = &lpuart1;
25 };
26
27 aliases {
28 eeprom0 = &eeprom0;
29 ethernet0 = &fec;
30 ethernet1 = &eqos;
31 rtc0 = &pcf85063;
32 rtc1 = &bbnsm_rtc;
33 };
34
35 backlight_lvds: backlight {
36 compatible = "pwm-backlight";
37 pwms = <&tpm5 0 5000000 0>;
38 brightness-levels = <0 4 8 16
39 default-brightness-level = <7>
40 power-supply = <®_12v0>;
41 enable-gpios = <&expander2 2 G
42 status = "disabled";
43 };
44
45 fan0: pwm-fan {
46 compatible = "pwm-fan";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_pwmfan>;
49 fan-supply = <®_pwm_fan>;
50 #cooling-cells = <2>;
51 /* typical 25 kHz -> 40.000 ns
52 pwms = <&tpm6 0 40000 PWM_POLA
53 cooling-levels = <0 32 64 128
54 pulses-per-revolution = <2>;
55 interrupt-parent = <&gpio2>;
56 interrupts = <9 IRQ_TYPE_EDGE_
57 status = "disabled";
58 };
59
60 gpio-keys {
61 compatible = "gpio-keys";
62 autorepeat;
63
64 switch-a {
65 label = "switcha";
66 linux,code = <BTN_0>;
67 gpios = <&expander0 6
68 wakeup-source;
69 };
70
71 switch-b {
72 label = "switchb";
73 linux,code = <BTN_1>;
74 gpios = <&expander0 7
75 wakeup-source;
76 };
77 };
78
79 gpio-leds {
80 compatible = "gpio-leds";
81
82 led-1 {
83 color = <LED_COLOR_ID_
84 function = LED_FUNCTIO
85 gpios = <&expander2 6
86 linux,default-trigger
87 };
88
89 led-2 {
90 color = <LED_COLOR_ID_
91 function = LED_FUNCTIO
92 gpios = <&expander2 7
93 linux,default-trigger
94 };
95 };
96
97 iio-hwmon {
98 compatible = "iio-hwmon";
99 io-channels = <&adc1 0>, <&adc
100 };
101
102 reg_3v3: regulator-3v3 {
103 compatible = "regulator-fixed"
104 regulator-name = "V_3V3_MB";
105 regulator-min-microvolt = <330
106 regulator-max-microvolt = <330
107 };
108
109 reg_5v0: regulator-5v0 {
110 compatible = "regulator-fixed"
111 regulator-name = "V_5V0_MB";
112 regulator-min-microvolt = <500
113 regulator-max-microvolt = <500
114 };
115
116 reg_12v0: regulator-12v0 {
117 compatible = "regulator-fixed"
118 regulator-name = "V_12V";
119 regulator-min-microvolt = <120
120 regulator-max-microvolt = <120
121 gpio = <&expander1 7 GPIO_ACTI
122 enable-active-high;
123 };
124
125 reg_mpcie_1v5: regulator-mpcie-1v5 {
126 compatible = "regulator-fixed"
127 regulator-name = "V_1V5_MPCIE"
128 regulator-min-microvolt = <150
129 regulator-max-microvolt = <150
130 gpio = <&expander0 2 GPIO_ACTI
131 enable-active-high;
132 };
133
134 reg_mpcie_3v3: regulator-mpcie-3v3 {
135 compatible = "regulator-fixed"
136 regulator-name = "V_3V3_MPCIE"
137 regulator-min-microvolt = <330
138 regulator-max-microvolt = <330
139 gpio = <&expander0 3 GPIO_ACTI
140 enable-active-high;
141 };
142
143 reg_pwm_fan: regulator-pwm-fan {
144 compatible = "regulator-fixed"
145 regulator-name = "FAN_PWR";
146 regulator-min-microvolt = <120
147 regulator-max-microvolt = <120
148 gpio = <&expander0 0 GPIO_ACTI
149 enable-active-high;
150 vin-supply = <®_12v0>;
151 };
152
153 thermal-zones {
154 cpu-thermal {
155 trips {
156 cpu_active0: t
157 temper
158 hyster
159 type =
160 };
161
162 cpu_active1: t
163 temper
164 hyster
165 type =
166 };
167
168 cpu_active2: t
169 temper
170 hyster
171 type =
172 };
173 };
174
175 cooling-maps {
176 map1 {
177 trip =
178 coolin
179 };
180
181 map2 {
182 trip =
183 coolin
184 };
185
186 map3 {
187 trip =
188 coolin
189 };
190 };
191 };
192 };
193 };
194
195 &adc1 {
196 status = "okay";
197 };
198
199 &eqos {
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_eqos>;
202 phy-mode = "rgmii-id";
203 phy-handle = <ðphy_eqos>;
204 status = "okay";
205
206 mdio {
207 compatible = "snps,dwmac-mdio"
208 #address-cells = <1>;
209 #size-cells = <0>;
210
211 ethphy_eqos: ethernet-phy@0 {
212 compatible = "ethernet
213 reg = <0>;
214 pinctrl-names = "defau
215 pinctrl-0 = <&pinctrl_
216 reset-gpios = <&expand
217 reset-assert-us = <500
218 reset-deassert-us = <5
219 interrupt-parent = <&g
220 interrupts = <26 IRQ_T
221 enet-phy-lane-no-swap;
222 ti,rx-internal-delay =
223 ti,tx-internal-delay =
224 ti,fifo-depth = <DP838
225 ti,dp83867-rxctrl-stra
226 ti,clk-output-sel = <D
227 };
228 };
229 };
230
231 &fec {
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_fec>;
234 phy-mode = "rgmii-id";
235 phy-handle = <ðphy_fec>;
236 fsl,magic-packet;
237 status = "okay";
238
239 mdio {
240 #address-cells = <1>;
241 #size-cells = <0>;
242 clock-frequency = <5000000>;
243
244 ethphy_fec: ethernet-phy@0 {
245 compatible = "ethernet
246 reg = <0>;
247 pinctrl-names = "defau
248 pinctrl-0 = <&pinctrl_
249 reset-gpios = <&expand
250 reset-assert-us = <500
251 reset-deassert-us = <5
252 interrupt-parent = <&g
253 interrupts = <27 IRQ_T
254 enet-phy-lane-no-swap;
255 ti,rx-internal-delay =
256 ti,tx-internal-delay =
257 ti,fifo-depth = <DP838
258 ti,dp83867-rxctrl-stra
259 ti,clk-output-sel = <D
260 };
261 };
262 };
263
264 &flexcan1 {
265 pinctrl-names = "default";
266 pinctrl-0 = <&pinctrl_flexcan1>;
267 xceiver-supply = <®_3v3>;
268 status = "okay";
269 };
270
271 &flexcan2 {
272 pinctrl-names = "default";
273 pinctrl-0 = <&pinctrl_flexcan2>;
274 xceiver-supply = <®_3v3>;
275 status = "okay";
276 };
277
278 &gpio1 {
279 gpio-line-names =
280 /* 00 */ "", "", "USB_C_ALERT#
281 /* 04 */ "", "", "", "",
282 /* 08 */ "", "", "", "BM2_TEMP
283 /* 12 */ "PEX_INT#", "", "RTC_
284 /* 16 */ "", "", "", "",
285 /* 20 */ "", "", "", "",
286 /* 24 */ "", "", "", "",
287 /* 28 */ "", "", "", "";
288
289 expander-irq-hog {
290 gpio-hog;
291 gpios = <12 GPIO_ACTIVE_LOW>;
292 input;
293 line-name = "PEX_INT#";
294 };
295
296 tcpc-irq-hog {
297 gpio-hog;
298 gpios = <2 GPIO_ACTIVE_LOW>;
299 input;
300 line-name = "USB_C_ALERT#";
301 };
302 };
303
304 &gpio2 {
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_gpio2>;
307
308 gpio-line-names =
309 /* 00 */ "SPI6_PCS0#", "", "",
310 /* 04 */ "", "", "", "",
311 /* 08 */ "", "FAN_RPM", "MIPI_
312 /* 12 */ "", "", "", "",
313 /* 16 */ "X1_11", "X1_21", "X1
314 /* 20 */ "X1_15", "X1_9", "",
315 /* 24 */ "", "", "X1_7", "",
316 /* 28 */ "", "", "", "";
317 };
318
319 &gpio3 {
320 gpio-line-names =
321 /* 00 */ "SD2_CD#", "", "", ""
322 /* 04 */ "", "", "", "SD2_RST#
323 /* 08 */ "", "", "", "",
324 /* 12 */ "", "", "", "",
325 /* 16 */ "", "", "", "",
326 /* 20 */ "", "", "", "",
327 /* 24 */ "", "", "ENET1_INT#",
328 /* 28 */ "", "", "", "";
329 };
330
331 &gpio4 {
332 gpio-line-names =
333 /* 00 */ "", "", "", "",
334 /* 04 */ "", "", "", "",
335 /* 08 */ "", "", "", "",
336 /* 12 */ "", "", "", "",
337 /* 16 */ "", "", "", "",
338 /* 20 */ "", "", "", "",
339 /* 24 */ "", "", "", "",
340 /* 28 */ "", "DP_INT", "", "";
341 };
342
343 &lpi2c3 {
344 #address-cells = <1>;
345 #size-cells = <0>;
346 clock-frequency = <400000>;
347 pinctrl-names = "default", "sleep";
348 pinctrl-0 = <&pinctrl_lpi2c3>;
349 pinctrl-1 = <&pinctrl_lpi2c3>;
350 status = "okay";
351
352 temperature-sensor@1c {
353 compatible = "nxp,se97b", "jed
354 reg = <0x1c>;
355 };
356
357 ptn5110: usb-typec@50 {
358 compatible = "nxp,ptn5110", "t
359 reg = <0x50>;
360 pinctrl-names = "default";
361 pinctrl-0 = <&pinctrl_typec>;
362 interrupt-parent = <&gpio1>;
363 interrupts = <2 IRQ_TYPE_EDGE_
364
365 connector {
366 compatible = "usb-c-co
367 label = "X17";
368 power-role = "dual";
369 data-role = "dual";
370 try-power-role = "sink
371 typec-power-opmode = "
372 pd-disable;
373 self-powered;
374
375 port {
376 typec_con_hs:
377 remote
378 };
379 };
380 };
381 };
382
383 eeprom2: eeprom@54 {
384 compatible = "nxp,se97b", "atm
385 reg = <0x54>;
386 pagesize = <16>;
387 vcc-supply = <®_3v3>;
388 };
389
390 expander0: gpio@70 {
391 compatible = "nxp,pca9538";
392 reg = <0x70>;
393 pinctrl-names = "default";
394 pinctrl-0 = <&pinctrl_pexp_irq
395 gpio-controller;
396 #gpio-cells = <2>;
397 interrupt-controller;
398 #interrupt-cells = <2>;
399 interrupt-parent = <&gpio1>;
400 interrupts = <12 IRQ_TYPE_LEVE
401 vcc-supply = <®_3v3>;
402 gpio-line-names = "FAN_PWR_EN"
403 "MPCIE_1V5_E
404 "MPCIE_PERST
405 "BUTTON_A#",
406
407 mpcie-wake-hog {
408 gpio-hog;
409 gpios = <1 GPIO_ACTIVE
410 input;
411 line-name = "MPCIE_WAK
412 };
413
414 /*
415 * Controls the mPCIE slot res
416 * reset signal. The output-lo
417 * inactive, e.g. not in reset
418 */
419 mpcie_rst_hog: mpcie-rst-hog {
420 gpio-hog;
421 gpios = <4 GPIO_ACTIVE
422 output-low;
423 line-name = "MPCIE_PER
424 };
425
426 /*
427 * Controls the mPCIE slot WDI
428 * as disable signal. The outp
429 * inactive, e.g. not disabled
430 */
431 mpcie_wdisable_hog: mpcie-wdis
432 gpio-hog;
433 gpios = <5 GPIO_ACTIVE
434 output-low;
435 line-name = "MPCIE_WDI
436 };
437 };
438
439 expander1: gpio@71 {
440 compatible = "nxp,pca9538";
441 reg = <0x71>;
442 gpio-controller;
443 #gpio-cells = <2>;
444 vcc-supply = <®_3v3>;
445 gpio-line-names = "ENET1_RESET
446 "USB_RESET#"
447 "WLAN_PD#",
448 "WLAN_PERST#
449
450 /*
451 * Controls the WiFi card PD p
452 * as power down signal. The o
453 * is active, e.g. card is pow
454 */
455 wlan-pd-hog {
456 gpio-hog;
457 gpios = <4 GPIO_ACTIVE
458 output-high;
459 line-name = "WLAN_PD#"
460 };
461
462 /*
463 * Controls the WiFi card disa
464 * as disable signal. The outp
465 * is active, e.g. card is dis
466 */
467 wlan-wdisable-hog {
468 gpio-hog;
469 gpios = <5 GPIO_ACTIVE
470 output-high;
471 line-name = "WLAN_W_DI
472 };
473
474 /*
475 * Controls the WiFi card rese
476 * as reset signal. The output
477 * is active, e.g. card in res
478 */
479 wlan-perst-hog {
480 gpio-hog;
481 gpios = <6 GPIO_ACTIVE
482 output-high;
483 line-name = "WLAN_PERS
484 };
485 };
486
487 expander2: gpio@72 {
488 compatible = "nxp,pca9538";
489 reg = <0x72>;
490 gpio-controller;
491 #gpio-cells = <2>;
492 vcc-supply = <®_3v3>;
493 gpio-line-names = "LCD_RESET#"
494 "LCD_BLT_EN"
495 "MIPI_CSI_EN
496 "USER_LED1",
497 };
498 };
499
500 &lpi2c5 {
501 #address-cells = <1>;
502 #size-cells = <0>;
503 clock-frequency = <400000>;
504 pinctrl-names = "default", "sleep";
505 pinctrl-0 = <&pinctrl_lpi2c5>;
506 pinctrl-1 = <&pinctrl_lpi2c5>;
507 status = "okay";
508 };
509
510 &lpspi6 {
511 pinctrl-names = "default", "sleep";
512 pinctrl-0 = <&pinctrl_lpspi6>;
513 pinctrl-1 = <&pinctrl_lpspi6>;
514 status = "okay";
515 };
516
517 &lpuart1 {
518 pinctrl-names = "default";
519 pinctrl-0 = <&pinctrl_uart1>;
520 status = "okay";
521 };
522
523 &lpuart2 {
524 pinctrl-names = "default";
525 pinctrl-0 = <&pinctrl_uart2>;
526 linux,rs485-enabled-at-boot-time;
527 status = "okay";
528 };
529
530 /* disabled per default, console for M33 */
531 &lpuart3 {
532 pinctrl-names = "default";
533 pinctrl-0 = <&pinctrl_uart3>;
534 status = "disabled";
535 };
536
537 &lpuart6 {
538 pinctrl-names = "default";
539 pinctrl-0 = <&pinctrl_uart6>;
540 status = "okay";
541 };
542
543 &lpuart8 {
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_uart8>;
546 status = "okay";
547 };
548
549 &pcf85063 {
550 /* RTC_EVENT# from SoM is connected on
551 pinctrl-names = "default";
552 pinctrl-0 = <&pinctrl_pcf85063>;
553 interrupt-parent = <&gpio1>;
554 interrupts = <14 IRQ_TYPE_EDGE_FALLING
555 };
556
557 &se97_som {
558 /* TEMP_EVENT# from SoM is connected o
559 pinctrl-names = "default";
560 pinctrl-0 = <&pinctrl_temp_sensor_som>
561 interrupt-parent = <&gpio1>;
562 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
563 };
564
565 &tpm5 {
566 pinctrl-names = "default";
567 pinctrl-0 = <&pinctrl_tpm5>;
568 };
569
570 &tpm6 {
571 pinctrl-names = "default";
572 pinctrl-0 = <&pinctrl_tpm6>;
573 status = "okay";
574 };
575
576 &usbotg1 {
577 dr_mode = "otg";
578 hnp-disable;
579 srp-disable;
580 adp-disable;
581 usb-role-switch;
582 disable-over-current;
583 samsung,picophy-pre-emp-curr-control =
584 samsung,picophy-dc-vol-level-adjust =
585 status = "okay";
586
587 port {
588 typec_hs: endpoint {
589 remote-endpoint = <&ty
590 };
591 };
592 };
593
594 &usbotg2 {
595 dr_mode = "host";
596 #address-cells = <1>;
597 #size-cells = <0>;
598 disable-over-current;
599 samsung,picophy-pre-emp-curr-control =
600 samsung,picophy-dc-vol-level-adjust =
601 status = "okay";
602
603 hub_2_0: usb-hub@1 {
604 compatible = "usb424,2517";
605 reg = <1>;
606 reset-gpios = <&expander1 2 GP
607 vdd-supply = <®_3v3>;
608 };
609 };
610
611 &usdhc2 {
612 pinctrl-names = "default", "state_100m
613 pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pi
614 pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&p
615 pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&p
616 cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
617 vmmc-supply = <®_usdhc2_vmmc>;
618 bus-width = <4>;
619 no-sdio;
620 no-mmc;
621 disable-wp;
622 status = "okay";
623 };
624
625 &iomuxc {
626 pinctrl_eqos: eqosgrp {
627 fsl,pins = <
628 /* PD | FSEL_2 | DSE X
629 MX93_PAD_ENET1_MDC__EN
630 /* SION | HYS | FSEL_2
631 MX93_PAD_ENET1_MDIO__E
632 /* HYS | FSEL_0 | DSE
633 MX93_PAD_ENET1_RD0__EN
634 MX93_PAD_ENET1_RD1__EN
635 MX93_PAD_ENET1_RD2__EN
636 MX93_PAD_ENET1_RD3__EN
637 MX93_PAD_ENET1_RX_CTL_
638 /* HYS | PD | FSEL_0 |
639 MX93_PAD_ENET1_RXC__CC
640 /* PD | FSEL_2 | DSE X
641 MX93_PAD_ENET1_TD0__EN
642 MX93_PAD_ENET1_TD1__EN
643 MX93_PAD_ENET1_TD2__EN
644 MX93_PAD_ENET1_TD3__EN
645 MX93_PAD_ENET1_TX_CTL_
646 /* PD | FSEL_3 | DSE X
647 MX93_PAD_ENET1_TXC__CC
648 >;
649 };
650
651 pinctrl_eqos_phy: eqosphygrp {
652 fsl,pins = <
653 /* HYS | FSEL_0 | DSE
654 MX93_PAD_CCM_CLKO1__GP
655 >;
656 };
657
658 pinctrl_fec: fecgrp {
659 fsl,pins = <
660 /* PD | FSEL_2 | DSE X
661 MX93_PAD_ENET2_MDC__EN
662 /* SION | HYS | FSEL_2
663 MX93_PAD_ENET2_MDIO__E
664 /* HYS | FSEL_0 | DSE
665 MX93_PAD_ENET2_RD0__EN
666 MX93_PAD_ENET2_RD1__EN
667 MX93_PAD_ENET2_RD2__EN
668 MX93_PAD_ENET2_RD3__EN
669 MX93_PAD_ENET2_RX_CTL_
670 /* HYS | PD | FSEL_0 |
671 MX93_PAD_ENET2_RXC__EN
672 /* PD | FSEL_2 | DSE X
673 MX93_PAD_ENET2_TD0__EN
674 MX93_PAD_ENET2_TD1__EN
675 MX93_PAD_ENET2_TD2__EN
676 MX93_PAD_ENET2_TD3__EN
677 MX93_PAD_ENET2_TX_CTL_
678 /* PD | FSEL_3 | DSE X
679 MX93_PAD_ENET2_TXC__EN
680 >;
681 };
682
683 pinctrl_fec_phy: fecphygrp {
684 fsl,pins = <
685 /* HYS | FSEL_0 | DSE
686 MX93_PAD_CCM_CLKO2__GP
687 >;
688 };
689
690 pinctrl_flexcan1: flexcan1grp {
691 fsl,pins = <
692 /* HYS | PU | FSEL_0 |
693 MX93_PAD_PDM_BIT_STREA
694 /* PU | FSEL_3 | DSE X
695 MX93_PAD_PDM_CLK__CAN1
696 >;
697 };
698
699 pinctrl_flexcan2: flexcan2grp {
700 fsl,pins = <
701 /* HYS | PU | FSEL_0 |
702 MX93_PAD_GPIO_IO27__CA
703 /* PU | FSEL_3 | DSE X
704 MX93_PAD_GPIO_IO25__CA
705 >;
706 };
707
708 pinctrl_gpio2: gpio2grp {
709 fsl,pins = <
710 /* HYS | PD | FSEL_2 |
711 MX93_PAD_GPIO_IO16__GP
712 MX93_PAD_GPIO_IO17__GP
713 MX93_PAD_GPIO_IO18__GP
714 MX93_PAD_GPIO_IO19__GP
715 MX93_PAD_GPIO_IO20__GP
716 MX93_PAD_GPIO_IO21__GP
717 MX93_PAD_GPIO_IO26__GP
718 >;
719 };
720
721 pinctrl_jtag: jtaggrp {
722 fsl,pins = <
723 MX93_PAD_DAP_TCLK_SWCL
724 MX93_PAD_DAP_TDI__JTAG
725 MX93_PAD_DAP_TDO_TRACE
726 MX93_PAD_DAP_TMS_SWDIO
727 >;
728 };
729
730 pinctrl_lpi2c3: lpi2c3grp {
731 fsl,pins = <
732 /* SION | HYS | OD | F
733 MX93_PAD_GPIO_IO28__LP
734 MX93_PAD_GPIO_IO29__LP
735 >;
736 };
737
738 pinctrl_lpi2c5: lpi2c5grp {
739 fsl,pins = <
740 /* SION | HYS | OD | F
741 MX93_PAD_GPIO_IO22__LP
742 MX93_PAD_GPIO_IO23__LP
743 >;
744 };
745
746 pinctrl_lpspi6: lpspi6grp {
747 fsl,pins = <
748 /* FSEL_2 | DSE X4 */
749 MX93_PAD_GPIO_IO00__LP
750 /* HYS | PD | FSEL_0 |
751 MX93_PAD_GPIO_IO01__LP
752 /* PD | FSEL_2 | DSE X
753 MX93_PAD_GPIO_IO02__LP
754 MX93_PAD_GPIO_IO03__LP
755 >;
756 };
757
758 pinctrl_pcf85063: pcf85063grp {
759 fsl,pins = <
760 MX93_PAD_SAI1_RXD0__GP
761 >;
762 };
763
764 pinctrl_mipi_csi: mipicsigrp {
765 fsl,pins = <
766 MX93_PAD_CCM_CLKO3__CC
767 MX93_PAD_GPIO_IO10__GP
768 MX93_PAD_GPIO_IO11__GP
769 >;
770 };
771
772 pinctrl_pexp_irq: pexpirqgrp {
773 fsl,pins = <
774 /* HYS | FSEL_0 | No D
775 MX93_PAD_SAI1_TXC__GPI
776 >;
777 };
778
779 pinctrl_pwmfan: pwmfangrp {
780 fsl,pins = <
781 /* HYS | PU | FSEL_0 |
782 MX93_PAD_GPIO_IO09__GP
783 >;
784 };
785
786 pinctrl_temp_sensor_som: tempsensorsom
787 fsl,pins = <
788 /* HYS | FSEL_0 | no D
789 MX93_PAD_SAI1_TXFS__GP
790 >;
791 };
792
793 pinctrl_tc9595: tc9595-grp {
794 fsl,pins = <
795 /* HYS | PD | FSEL_0 |
796 MX93_PAD_CCM_CLKO4__GP
797 >;
798 };
799
800 pinctrl_tpm5: tpm5grp {
801 fsl,pins = <
802 MX93_PAD_GPIO_IO06__TP
803 >;
804 };
805
806 pinctrl_tpm6: tpm6grp {
807 fsl,pins = <
808 MX93_PAD_GPIO_IO08__TP
809 >;
810 };
811
812 pinctrl_typec: typecgrp {
813 fsl,pins = <
814 /* HYS | FSEL_0 | No D
815 MX93_PAD_I2C2_SCL__GPI
816 >;
817 };
818
819 pinctrl_uart1: uart1grp {
820 fsl,pins = <
821 /* HYS | FSEL_0 | No D
822 MX93_PAD_UART1_RXD__LP
823 /* FSEL_2 | DSE X4 */
824 MX93_PAD_UART1_TXD__LP
825 >;
826 };
827
828 pinctrl_uart2: uart2grp {
829 fsl,pins = <
830 /* HYS | FSEL_0 | No D
831 MX93_PAD_UART2_RXD__LP
832 /* FSEL_2 | DSE X4 */
833 MX93_PAD_UART2_TXD__LP
834 /* FSEL_2 | DSE X4 */
835 MX93_PAD_SAI1_TXD0__LP
836 >;
837 };
838
839 pinctrl_uart3: uart3grp {
840 fsl,pins = <
841 /* HYS | FSEL_0 | No D
842 MX93_PAD_GPIO_IO15__LP
843 /* FSEL_2 | DSE X4 */
844 MX93_PAD_GPIO_IO14__LP
845 >;
846 };
847
848 pinctrl_uart6: uart6grp {
849 fsl,pins = <
850 /* HYS | FSEL_0 | No D
851 MX93_PAD_GPIO_IO05__LP
852 /* FSEL_2 | DSE X4 */
853 MX93_PAD_GPIO_IO04__LP
854 >;
855 };
856
857 pinctrl_uart8: uart8grp {
858 fsl,pins = <
859 /* HYS | FSEL_0 | No D
860 MX93_PAD_GPIO_IO13__LP
861 /* FSEL_2 | DSE X4 */
862 MX93_PAD_GPIO_IO12__LP
863 >;
864 };
865
866 pinctrl_usdhc2_gpio: usdhc2gpiogrp {
867 fsl,pins = <
868 /* HYS | FSEL_0 | No D
869 MX93_PAD_SD2_CD_B__GPI
870 >;
871 };
872
873 /* enable SION for data and cmd pad du
874 pinctrl_usdhc2_hs: usdhc2hsgrp {
875 fsl,pins = <
876 /* PD | FSEL_3 | DSE X
877 MX93_PAD_SD2_CLK__USDH
878 /* HYS | PU | FSEL_3 |
879 MX93_PAD_SD2_CMD__USDH
880 /* HYS | PU | FSEL_3 |
881 MX93_PAD_SD2_DATA0__US
882 MX93_PAD_SD2_DATA1__US
883 MX93_PAD_SD2_DATA2__US
884 MX93_PAD_SD2_DATA3__US
885 /* FSEL_2 | DSE X3 */
886 MX93_PAD_SD2_VSELECT__
887 >;
888 };
889
890 /* enable SION for data and cmd pad du
891 pinctrl_usdhc2_uhs: usdhc2uhsgrp {
892 fsl,pins = <
893 /* PD | FSEL_3 | DSE X
894 MX93_PAD_SD2_CLK__USDH
895 /* HYS | PU | FSEL_3 |
896 MX93_PAD_SD2_CMD__USDH
897 MX93_PAD_SD2_DATA0__US
898 MX93_PAD_SD2_DATA1__US
899 MX93_PAD_SD2_DATA2__US
900 MX93_PAD_SD2_DATA3__US
901 /* FSEL_2 | DSE X3 */
902 MX93_PAD_SD2_VSELECT__
903 >;
904 };
905 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.