1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Device Tree file for Marvell Armada 3720 de 3 * Device Tree file for Marvell Armada 3720 development board
4 * (DB-88F3720-DDR3) 4 * (DB-88F3720-DDR3)
5 * Copyright (C) 2016 Marvell 5 * Copyright (C) 2016 Marvell
6 * 6 *
7 * Gregory CLEMENT <gregory.clement@free-electr 7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 * 8 *
9 * This file is compatible with the version 1. 9 * This file is compatible with the version 1.4 and the version 2.0 of
10 * the board, however the CON numbers are diff 10 * the board, however the CON numbers are different between the 2
11 * version 11 * version
12 */ 12 */
13 13
14 /dts-v1/; 14 /dts-v1/;
15 15
16 #include <dt-bindings/gpio/gpio.h> 16 #include <dt-bindings/gpio/gpio.h>
17 #include "armada-372x.dtsi" 17 #include "armada-372x.dtsi"
18 18
19 / { 19 / {
20 model = "Marvell Armada 3720 Developme 20 model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
21 compatible = "marvell,armada-3720-db", 21 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
22 22
23 chosen { 23 chosen {
24 stdout-path = "serial0:115200n 24 stdout-path = "serial0:115200n8";
25 }; 25 };
26 26
27 memory@0 { 27 memory@0 {
28 device_type = "memory"; 28 device_type = "memory";
29 reg = <0x00000000 0x00000000 0 29 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
30 }; 30 };
31 31
32 exp_usb3_vbus: usb3-vbus { 32 exp_usb3_vbus: usb3-vbus {
33 compatible = "regulator-fixed" 33 compatible = "regulator-fixed";
34 regulator-name = "usb3-vbus"; 34 regulator-name = "usb3-vbus";
35 regulator-min-microvolt = <500 35 regulator-min-microvolt = <5000000>;
36 regulator-max-microvolt = <500 36 regulator-max-microvolt = <5000000>;
37 enable-active-high; 37 enable-active-high;
38 regulator-always-on; 38 regulator-always-on;
39 gpio = <&gpio_exp 1 GPIO_ACTIV 39 gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
40 }; 40 };
41 41
42 usb3_phy: usb3-phy { 42 usb3_phy: usb3-phy {
43 compatible = "usb-nop-xceiv"; 43 compatible = "usb-nop-xceiv";
44 vcc-supply = <&exp_usb3_vbus>; 44 vcc-supply = <&exp_usb3_vbus>;
45 }; 45 };
46 46
47 vcc_sd_reg1: regulator { 47 vcc_sd_reg1: regulator {
48 compatible = "regulator-gpio"; 48 compatible = "regulator-gpio";
49 regulator-name = "vcc_sd1"; 49 regulator-name = "vcc_sd1";
50 regulator-min-microvolt = <180 50 regulator-min-microvolt = <1800000>;
51 regulator-max-microvolt = <330 51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on; 52 regulator-boot-on;
53 53
54 gpios = <&gpiosb 23 GPIO_ACTIV 54 gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
55 gpios-states = <0>; 55 gpios-states = <0>;
56 states = <1800000 0x1 56 states = <1800000 0x1
57 3300000 0x0>; 57 3300000 0x0>;
58 enable-active-high; 58 enable-active-high;
59 }; 59 };
60 60
61 vcc_sd_reg2: regulator-vmcc { 61 vcc_sd_reg2: regulator-vmcc {
62 compatible = "regulator-fixed" 62 compatible = "regulator-fixed";
63 regulator-name = "vcc_sd2"; 63 regulator-name = "vcc_sd2";
64 regulator-min-microvolt = <330 64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <330 65 regulator-max-microvolt = <3300000>;
66 regulator-boot-on; 66 regulator-boot-on;
67 enable-active-high; 67 enable-active-high;
68 gpio = <&gpio_exp 4 GPIO_ACTIV 68 gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
69 }; 69 };
70 }; 70 };
71 71
72 /* Gigabit module on CON19(V2.0)/CON21(V1.4) * 72 /* Gigabit module on CON19(V2.0)/CON21(V1.4) */
73 ð0 { 73 ð0 {
74 pinctrl-names = "default"; 74 pinctrl-names = "default";
75 pinctrl-0 = <&rgmii_pins>; 75 pinctrl-0 = <&rgmii_pins>;
76 phy-mode = "rgmii-id"; 76 phy-mode = "rgmii-id";
77 phy = <&phy0>; 77 phy = <&phy0>;
78 status = "okay"; 78 status = "okay";
79 }; 79 };
80 80
81 /* Gigabit module on CON18(V2.0)/CON20(V1.4) * 81 /* Gigabit module on CON18(V2.0)/CON20(V1.4) */
82 ð1 { 82 ð1 {
83 phy-mode = "sgmii"; 83 phy-mode = "sgmii";
84 phy = <&phy1>; 84 phy = <&phy1>;
85 status = "okay"; 85 status = "okay";
86 }; 86 };
87 87
88 &i2c0 { 88 &i2c0 {
89 pinctrl-names = "default"; 89 pinctrl-names = "default";
90 pinctrl-0 = <&i2c1_pins>; 90 pinctrl-0 = <&i2c1_pins>;
91 status = "okay"; 91 status = "okay";
92 92
93 gpio_exp: pca9555@22 { 93 gpio_exp: pca9555@22 {
94 compatible = "nxp,pca9555"; 94 compatible = "nxp,pca9555";
95 gpio-controller; 95 gpio-controller;
96 #gpio-cells = <2>; 96 #gpio-cells = <2>;
97 97
98 reg = <0x22>; 98 reg = <0x22>;
99 /* 99 /*
100 * IO0_0: PWR_EN_USB2 IO1_0: 100 * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT
101 * IO0_1: PWR_EN_USB23 IO1_1: 101 * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE
102 * IO0_2: PWR_EN_SATA IO1_2: 102 * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN
103 * IO0_3: PWR_EN_PCIE IO1_3: 103 * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN
104 * IO0_4: PWR_EN_SD 104 * IO0_4: PWR_EN_SD
105 * IO0_5: PWR_EN_EMMC 105 * IO0_5: PWR_EN_EMMC
106 * IO0_6: PWR_EN_RGMII IO1_6: 106 * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL
107 * IO0_7: PWR_EN_SGMII IO1_7: 107 * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS
108 */ 108 */
109 }; 109 };
110 110
111 rtc@68 { 111 rtc@68 {
112 /* PT7C4337A from pericom full 112 /* PT7C4337A from pericom fully compatible with the ds1337 */
113 compatible = "dallas,ds1337"; 113 compatible = "dallas,ds1337";
114 reg = <0x68>; 114 reg = <0x68>;
115 }; 115 };
116 }; 116 };
117 117
118 &mdio { 118 &mdio {
119 status = "okay"; 119 status = "okay";
120 phy0: ethernet-phy@0 { 120 phy0: ethernet-phy@0 {
121 reg = <0>; 121 reg = <0>;
122 }; 122 };
123 123
124 phy1: ethernet-phy@1 { 124 phy1: ethernet-phy@1 {
125 reg = <1>; 125 reg = <1>;
126 }; 126 };
127 }; 127 };
128 128
129 /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0 129 /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
130 &pcie0 { 130 &pcie0 {
131 pinctrl-names = "default"; 131 pinctrl-names = "default";
132 pinctrl-0 = <&pcie_reset_pins &pcie_cl 132 pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
133 reset-gpios = <&gpiosb 3 GPIO_ACTIVE_L 133 reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
134 status = "okay"; 134 status = "okay";
135 }; 135 };
136 136
137 /* CON3 */ 137 /* CON3 */
138 &sata { 138 &sata {
139 status = "okay"; 139 status = "okay";
140 }; 140 };
141 141
142 &sdhci0 { 142 &sdhci0 {
143 non-removable; 143 non-removable;
144 bus-width = <8>; 144 bus-width = <8>;
145 mmc-ddr-1_8v; 145 mmc-ddr-1_8v;
146 mmc-hs400-1_8v; 146 mmc-hs400-1_8v;
147 marvell,pad-type = "fixed-1-8v"; 147 marvell,pad-type = "fixed-1-8v";
148 status = "okay"; 148 status = "okay";
149 }; 149 };
150 150
151 /* SD slot module on CON14(V2.0)/CON15(V1.4) * 151 /* SD slot module on CON14(V2.0)/CON15(V1.4) */
152 &sdhci1 { 152 &sdhci1 {
153 wp-inverted; 153 wp-inverted;
154 cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW> 154 cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
155 bus-width = <4>; 155 bus-width = <4>;
156 marvell,pad-type = "sd"; 156 marvell,pad-type = "sd";
157 vqmmc-supply = <&vcc_sd_reg1>; 157 vqmmc-supply = <&vcc_sd_reg1>;
158 vmmc-supply = <&vcc_sd_reg2>; 158 vmmc-supply = <&vcc_sd_reg2>;
159 status = "okay"; 159 status = "okay";
160 }; 160 };
161 161
162 &spi0 { 162 &spi0 {
163 status = "okay"; 163 status = "okay";
164 pinctrl-names = "default"; 164 pinctrl-names = "default";
165 pinctrl-0 = <&spi_quad_pins>; 165 pinctrl-0 = <&spi_quad_pins>;
166 166
167 flash@0 { 167 flash@0 {
168 compatible = "jedec,spi-nor"; 168 compatible = "jedec,spi-nor";
169 reg = <0>; 169 reg = <0>;
170 spi-max-frequency = <108000000 170 spi-max-frequency = <108000000>;
171 spi-rx-bus-width = <4>; 171 spi-rx-bus-width = <4>;
172 spi-tx-bus-width = <4>; 172 spi-tx-bus-width = <4>;
173 173
174 partitions { 174 partitions {
175 compatible = "fixed-pa 175 compatible = "fixed-partitions";
176 #address-cells = <1>; 176 #address-cells = <1>;
177 #size-cells = <1>; 177 #size-cells = <1>;
178 partition@0 { 178 partition@0 {
179 label = "bootl 179 label = "bootloader";
180 reg = <0x0 0x2 180 reg = <0x0 0x200000>;
181 }; 181 };
182 partition@200000 { 182 partition@200000 {
183 label = "U-boo 183 label = "U-boot Env";
184 reg = <0x20000 184 reg = <0x200000 0x10000>;
185 }; 185 };
186 partition@210000 { 186 partition@210000 {
187 label = "Linux 187 label = "Linux";
188 reg = <0x21000 188 reg = <0x210000 0xDF0000>;
189 }; 189 };
190 }; 190 };
191 }; 191 };
192 }; 192 };
193 193
194 /* 194 /*
195 * Exported on the micro USB connector CON30(V 195 * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
196 * an FTDI (also on CON24(V2.0)/CON26(V1.4)). 196 * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
197 */ 197 */
198 &uart0 { 198 &uart0 {
199 pinctrl-names = "default"; 199 pinctrl-names = "default";
200 pinctrl-0 = <&uart1_pins>; 200 pinctrl-0 = <&uart1_pins>;
201 status = "okay"; 201 status = "okay";
202 }; 202 };
203 203
204 /* CON26(V2.0)/CON28(V1.4) */ 204 /* CON26(V2.0)/CON28(V1.4) */
205 &uart1 { 205 &uart1 {
206 pinctrl-names = "default"; 206 pinctrl-names = "default";
207 pinctrl-0 = <&uart2_pins>; 207 pinctrl-0 = <&uart2_pins>;
208 status = "okay"; 208 status = "okay";
209 }; 209 };
210 210
211 /* CON27(V2.0)/CON29(V1.4) */ 211 /* CON27(V2.0)/CON29(V1.4) */
212 &usb2 { 212 &usb2 {
213 status = "okay"; 213 status = "okay";
214 }; 214 };
215 215
216 /* CON29(V2.0)/CON31(V1.4) */ 216 /* CON29(V2.0)/CON31(V1.4) */
217 &usb3 { 217 &usb3 {
218 status = "okay"; 218 status = "okay";
219 usb-phy = <&usb3_phy>; 219 usb-phy = <&usb3_phy>;
220 }; 220 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.