1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /* 2 /*
3 * Copyright (C) 2020 Marvell International Lt 3 * Copyright (C) 2020 Marvell International Ltd.
4 * 4 *
5 * Device tree for the CN9132-DB board. 5 * Device tree for the CN9132-DB board.
6 */ 6 */
7 7
8 #include "cn9131-db.dtsi" 8 #include "cn9131-db.dtsi"
9 9
10 / { 10 / {
11 compatible = "marvell,cn9132", "marvel 11 compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
12 "marvell,armada-ap807-qua 12 "marvell,armada-ap807-quad", "marvell,armada-ap807";
13 13
14 aliases { 14 aliases {
15 gpio5 = &cp2_gpio1; 15 gpio5 = &cp2_gpio1;
16 gpio6 = &cp2_gpio2; 16 gpio6 = &cp2_gpio2;
17 ethernet5 = &cp2_eth0; 17 ethernet5 = &cp2_eth0;
18 }; 18 };
19 19
20 cp2_reg_usb3_vbus0: regulator-7 { !! 20 cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
21 compatible = "regulator-fixed" 21 compatible = "regulator-fixed";
22 regulator-name = "cp2-xhci0-vb 22 regulator-name = "cp2-xhci0-vbus";
23 regulator-min-microvolt = <500 23 regulator-min-microvolt = <5000000>;
24 regulator-max-microvolt = <500 24 regulator-max-microvolt = <5000000>;
25 enable-active-high; 25 enable-active-high;
26 gpio = <&cp2_gpio1 2 GPIO_ACTI 26 gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
27 }; 27 };
28 28
29 cp2_usb3_0_phy0: usb-phy-4 { !! 29 cp2_usb3_0_phy0: cp2_usb3_phy0 {
30 compatible = "usb-nop-xceiv"; 30 compatible = "usb-nop-xceiv";
31 vcc-supply = <&cp2_reg_usb3_vb 31 vcc-supply = <&cp2_reg_usb3_vbus0>;
32 }; 32 };
33 33
34 cp2_reg_usb3_vbus1: regulator-8 { !! 34 cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
35 compatible = "regulator-fixed" 35 compatible = "regulator-fixed";
36 regulator-name = "cp2-xhci1-vb 36 regulator-name = "cp2-xhci1-vbus";
37 regulator-min-microvolt = <500 37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <500 38 regulator-max-microvolt = <5000000>;
39 enable-active-high; 39 enable-active-high;
40 gpio = <&cp2_gpio1 3 GPIO_ACTI 40 gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
41 }; 41 };
42 42
43 cp2_usb3_0_phy1: usb-phy-5 { !! 43 cp2_usb3_0_phy1: cp2_usb3_phy1 {
44 compatible = "usb-nop-xceiv"; 44 compatible = "usb-nop-xceiv";
45 vcc-supply = <&cp2_reg_usb3_vb 45 vcc-supply = <&cp2_reg_usb3_vbus1>;
46 }; 46 };
47 47
48 cp2_reg_sd_vccq: regulator-9 { !! 48 cp2_reg_sd_vccq: cp2_sd_vccq@0 {
49 compatible = "regulator-gpio"; 49 compatible = "regulator-gpio";
50 regulator-name = "cp2_sd_vcc"; 50 regulator-name = "cp2_sd_vcc";
51 regulator-min-microvolt = <180 51 regulator-min-microvolt = <1800000>;
52 regulator-max-microvolt = <330 52 regulator-max-microvolt = <3300000>;
53 gpios = <&cp2_gpio2 17 GPIO_AC 53 gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
54 states = <1800000 0x1 3300000 54 states = <1800000 0x1 3300000 0x0>;
55 }; 55 };
56 56
57 cp2_sfp_eth0: sfp-eth-3 { !! 57 cp2_sfp_eth0: sfp-eth0 {
58 compatible = "sff,sfp"; 58 compatible = "sff,sfp";
59 i2c-bus = <&cp2_sfpp0_i2c>; 59 i2c-bus = <&cp2_sfpp0_i2c>;
60 los-gpios = <&cp2_module_expan !! 60 los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
61 mod-def0-gpios = <&cp2_module_ !! 61 mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
62 tx-disable-gpios = <&cp2_modul !! 62 tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
63 tx-fault-gpios = <&cp2_module_ !! 63 tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
64 /* 64 /*
65 * SFP cages are unconnected o 65 * SFP cages are unconnected on early PCBs because of an the I2C
66 * lanes not being connected. 66 * lanes not being connected. Prevent the port for being
67 * unusable by disabling the S 67 * unusable by disabling the SFP node.
68 */ 68 */
69 status = "disabled"; 69 status = "disabled";
70 }; 70 };
71 }; 71 };
72 72
73 /* 73 /*
74 * Instantiate the second slave CP115 74 * Instantiate the second slave CP115
75 */ 75 */
76 76
77 #define CP11X_NAME cp2 77 #define CP11X_NAME cp2
78 #define CP11X_BASE f6000000 78 #define CP11X_BASE f6000000
79 #define CP11X_PCIEx_MEM_BASE(iface) (0xe500000 79 #define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
80 #define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 80 #define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
81 #define CP11X_PCIE0_BASE f6600000 81 #define CP11X_PCIE0_BASE f6600000
82 #define CP11X_PCIE1_BASE f6620000 82 #define CP11X_PCIE1_BASE f6620000
83 #define CP11X_PCIE2_BASE f6640000 83 #define CP11X_PCIE2_BASE f6640000
84 84
85 #include "armada-cp115.dtsi" 85 #include "armada-cp115.dtsi"
86 86
87 #undef CP11X_NAME 87 #undef CP11X_NAME
88 #undef CP11X_BASE 88 #undef CP11X_BASE
89 #undef CP11X_PCIEx_MEM_BASE 89 #undef CP11X_PCIEx_MEM_BASE
90 #undef CP11X_PCIEx_MEM_SIZE 90 #undef CP11X_PCIEx_MEM_SIZE
91 #undef CP11X_PCIE0_BASE 91 #undef CP11X_PCIE0_BASE
92 #undef CP11X_PCIE1_BASE 92 #undef CP11X_PCIE1_BASE
93 #undef CP11X_PCIE2_BASE 93 #undef CP11X_PCIE2_BASE
94 94
95 &cp2_crypto { 95 &cp2_crypto {
96 status = "disabled"; 96 status = "disabled";
97 }; 97 };
98 98
99 &cp2_ethernet { 99 &cp2_ethernet {
100 status = "okay"; 100 status = "okay";
101 }; 101 };
102 102
103 /* SLM-1521-V2, CON9 */ 103 /* SLM-1521-V2, CON9 */
104 &cp2_eth0 { 104 &cp2_eth0 {
105 status = "disabled"; 105 status = "disabled";
106 phy-mode = "10gbase-r"; 106 phy-mode = "10gbase-r";
107 /* Generic PHY, providing serdes lanes 107 /* Generic PHY, providing serdes lanes */
108 phys = <&cp2_comphy4 0>; 108 phys = <&cp2_comphy4 0>;
109 managed = "in-band-status"; 109 managed = "in-band-status";
110 sfp = <&cp2_sfp_eth0>; 110 sfp = <&cp2_sfp_eth0>;
111 }; 111 };
112 112
113 &cp2_gpio1 { 113 &cp2_gpio1 {
114 status = "okay"; 114 status = "okay";
115 }; 115 };
116 116
117 &cp2_gpio2 { 117 &cp2_gpio2 {
118 status = "okay"; 118 status = "okay";
119 }; 119 };
120 120
121 &cp2_i2c0 { 121 &cp2_i2c0 {
122 clock-frequency = <100000>; 122 clock-frequency = <100000>;
123 123
124 /* SLM-1521-V2 - U3 */ 124 /* SLM-1521-V2 - U3 */
125 i2c-mux@72 { 125 i2c-mux@72 {
126 compatible = "nxp,pca9544"; 126 compatible = "nxp,pca9544";
127 #address-cells = <1>; 127 #address-cells = <1>;
128 #size-cells = <0>; 128 #size-cells = <0>;
129 reg = <0x72>; 129 reg = <0x72>;
130 cp2_sfpp0_i2c: i2c@0 { 130 cp2_sfpp0_i2c: i2c@0 {
131 #address-cells = <1>; 131 #address-cells = <1>;
132 #size-cells = <0>; 132 #size-cells = <0>;
133 reg = <0>; 133 reg = <0>;
134 }; 134 };
135 135
136 i2c@1 { 136 i2c@1 {
137 #address-cells = <1>; 137 #address-cells = <1>;
138 #size-cells = <0>; 138 #size-cells = <0>;
139 reg = <1>; 139 reg = <1>;
140 /* U12 */ 140 /* U12 */
141 cp2_module_expander1: 141 cp2_module_expander1: pca9555@21 {
142 compatible = " 142 compatible = "nxp,pca9555";
143 pinctrl-names 143 pinctrl-names = "default";
144 gpio-controlle 144 gpio-controller;
145 #gpio-cells = 145 #gpio-cells = <2>;
146 reg = <0x21>; 146 reg = <0x21>;
147 }; 147 };
148 }; 148 };
149 }; 149 };
150 }; 150 };
151 151
152 /* SLM-1521-V2, CON6 */ 152 /* SLM-1521-V2, CON6 */
153 &cp2_pcie0 { 153 &cp2_pcie0 {
154 status = "okay"; 154 status = "okay";
155 num-lanes = <2>; 155 num-lanes = <2>;
156 num-viewport = <8>; 156 num-viewport = <8>;
157 /* Generic PHY, providing serdes lanes 157 /* Generic PHY, providing serdes lanes */
158 phys = <&cp2_comphy0 0 158 phys = <&cp2_comphy0 0
159 &cp2_comphy1 0>; 159 &cp2_comphy1 0>;
160 }; 160 };
161 161
162 /* SLM-1521-V2, CON8 */ 162 /* SLM-1521-V2, CON8 */
163 &cp2_pcie2 { 163 &cp2_pcie2 {
164 status = "okay"; 164 status = "okay";
165 num-lanes = <1>; 165 num-lanes = <1>;
166 num-viewport = <8>; 166 num-viewport = <8>;
167 /* Generic PHY, providing serdes lanes 167 /* Generic PHY, providing serdes lanes */
168 phys = <&cp2_comphy5 2>; 168 phys = <&cp2_comphy5 2>;
169 }; 169 };
170 170
171 &cp2_sata0 { 171 &cp2_sata0 {
172 status = "okay"; 172 status = "okay";
173 173
174 /* SLM-1521-V2, CON4 */ 174 /* SLM-1521-V2, CON4 */
175 sata-port@0 { 175 sata-port@0 {
176 /* Generic PHY, providing serd 176 /* Generic PHY, providing serdes lanes */
177 phys = <&cp2_comphy2 0>; 177 phys = <&cp2_comphy2 0>;
178 }; 178 };
179 }; 179 };
180 180
181 /* CON 2 on SLM-1683 - microSD */ 181 /* CON 2 on SLM-1683 - microSD */
182 &cp2_sdhci0 { 182 &cp2_sdhci0 {
183 status = "okay"; 183 status = "okay";
184 pinctrl-names = "default"; 184 pinctrl-names = "default";
185 pinctrl-0 = <&cp2_sdhci_pins>; 185 pinctrl-0 = <&cp2_sdhci_pins>;
186 bus-width = <4>; 186 bus-width = <4>;
187 cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_ 187 cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
188 vqmmc-supply = <&cp2_reg_sd_vccq>; 188 vqmmc-supply = <&cp2_reg_sd_vccq>;
189 }; 189 };
190 190
191 &cp2_syscon0 { 191 &cp2_syscon0 {
192 cp2_pinctrl: pinctrl { 192 cp2_pinctrl: pinctrl {
193 compatible = "marvell,cp115-st 193 compatible = "marvell,cp115-standalone-pinctrl";
194 194
195 cp2_i2c0_pins: cp2-i2c-pins-0 195 cp2_i2c0_pins: cp2-i2c-pins-0 {
196 marvell,pins = "mpp37" 196 marvell,pins = "mpp37", "mpp38";
197 marvell,function = "i2 197 marvell,function = "i2c0";
198 }; 198 };
199 cp2_sdhci_pins: cp2-sdhi-pins- 199 cp2_sdhci_pins: cp2-sdhi-pins-0 {
200 marvell,pins = "mpp56" 200 marvell,pins = "mpp56", "mpp57", "mpp58",
201 "mpp59" 201 "mpp59", "mpp60", "mpp61";
202 marvell,function = "sd 202 marvell,function = "sdio";
203 }; 203 };
204 }; 204 };
205 }; 205 };
206 206
207 &cp2_utmi { 207 &cp2_utmi {
208 status = "okay"; 208 status = "okay";
209 }; 209 };
210 210
211 &cp2_usb3_0 { 211 &cp2_usb3_0 {
212 status = "okay"; 212 status = "okay";
213 usb-phy = <&cp2_usb3_0_phy0>; 213 usb-phy = <&cp2_usb3_0_phy0>;
214 phys = <&cp2_utmi0>; 214 phys = <&cp2_utmi0>;
215 phy-names = "usb"; 215 phy-names = "usb";
216 dr_mode = "host"; 216 dr_mode = "host";
217 }; 217 };
218 218
219 /* SLM-1521-V2, CON11 */ 219 /* SLM-1521-V2, CON11 */
220 &cp2_usb3_1 { 220 &cp2_usb3_1 {
221 status = "okay"; 221 status = "okay";
222 usb-phy = <&cp2_usb3_0_phy1>; 222 usb-phy = <&cp2_usb3_0_phy1>;
223 /* Generic PHY, providing serdes lanes 223 /* Generic PHY, providing serdes lanes */
224 phys = <&cp2_comphy3 1>, <&cp2_utmi1>; 224 phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
225 phy-names = "usb", "utmi"; 225 phy-names = "usb", "utmi";
226 dr_mode = "host"; 226 dr_mode = "host";
227 }; 227 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.