1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> <<
10 #include <dt-bindings/interrupt-controller/irq <<
11 7
12 / { 8 / {
13 model = "Asus Zenfone 2 Laser"; 9 model = "Asus Zenfone 2 Laser";
14 compatible = "asus,z00l", "qcom,msm891 10 compatible = "asus,z00l", "qcom,msm8916";
15 chassis-type = "handset"; <<
16 11
17 aliases { 12 aliases {
18 mmc0 = &sdhc_1; /* eMMC */ !! 13 serial0 = &blsp1_uart2;
19 mmc1 = &sdhc_2; /* SD card */ <<
20 serial0 = &blsp_uart2; <<
21 }; 14 };
22 15
23 chosen { 16 chosen {
24 stdout-path = "serial0"; 17 stdout-path = "serial0";
25 }; 18 };
26 19
27 gpio-keys { 20 gpio-keys {
28 compatible = "gpio-keys"; 21 compatible = "gpio-keys";
29 22
30 pinctrl-names = "default"; 23 pinctrl-names = "default";
31 pinctrl-0 = <&gpio_keys_defaul 24 pinctrl-0 = <&gpio_keys_default>;
32 25
33 label = "GPIO Buttons"; 26 label = "GPIO Buttons";
34 27
35 button-volume-up { !! 28 volume-up {
36 label = "Volume Up"; 29 label = "Volume Up";
37 gpios = <&tlmm 107 GPI !! 30 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_VOLU 31 linux,code = <KEY_VOLUMEUP>;
39 debounce-interval = <1 32 debounce-interval = <15>;
40 }; 33 };
41 34
42 button-volume-down { !! 35 volume-down {
43 label = "Volume Down"; 36 label = "Volume Down";
44 gpios = <&tlmm 117 GPI !! 37 gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_VOLU 38 linux,code = <KEY_VOLUMEDOWN>;
46 debounce-interval = <1 39 debounce-interval = <15>;
47 }; 40 };
48 }; 41 };
49 42
50 reg_sd_vmmc: regulator-sdcard-vmmc { <<
51 compatible = "regulator-fixed" <<
52 regulator-name = "sdcard-vmmc" <<
53 regulator-min-microvolt = <295 <<
54 regulator-max-microvolt = <295 <<
55 <<
56 gpio = <&tlmm 87 GPIO_ACTIVE_H <<
57 enable-active-high; <<
58 <<
59 startup-delay-us = <200>; <<
60 <<
61 pinctrl-names = "default"; <<
62 pinctrl-0 = <&sd_vmmc_en_defau <<
63 }; <<
64 <<
65 usb_id: usb-id { 43 usb_id: usb-id {
66 compatible = "linux,extcon-usb 44 compatible = "linux,extcon-usb-gpio";
67 id-gpios = <&tlmm 110 GPIO_ACT !! 45 id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
68 pinctrl-names = "default"; 46 pinctrl-names = "default";
69 pinctrl-0 = <&usb_id_default>; 47 pinctrl-0 = <&usb_id_default>;
70 }; 48 };
71 }; 49 };
72 50
73 &blsp_i2c2 { !! 51 &blsp1_uart2 {
74 status = "okay"; 52 status = "okay";
75 <<
76 magnetometer@c { <<
77 compatible = "asahi-kasei,ak09 <<
78 reg = <0x0c>; <<
79 <<
80 vdd-supply = <&pm8916_l8>; <<
81 vid-supply = <&pm8916_l6>; <<
82 <<
83 reset-gpios = <&tlmm 112 GPIO_ <<
84 <<
85 pinctrl-names = "default"; <<
86 pinctrl-0 = <&mag_reset_defaul <<
87 }; <<
88 <<
89 imu@68 { <<
90 compatible = "invensense,mpu65 <<
91 reg = <0x68>; <<
92 <<
93 interrupt-parent = <&tlmm>; <<
94 interrupts = <36 IRQ_TYPE_EDGE <<
95 <<
96 vdd-supply = <&pm8916_l17>; <<
97 vddio-supply = <&pm8916_l6>; <<
98 <<
99 pinctrl-names = "default"; <<
100 pinctrl-0 = <&imu_default>; <<
101 <<
102 mount-matrix = "1", "0", "0", <<
103 "0", "-1", "0", <<
104 "0", "0", "1"; <<
105 }; <<
106 }; 53 };
107 54
108 &blsp_i2c5 { !! 55 &pronto {
109 status = "okay"; 56 status = "okay";
110 <<
111 touchscreen@38 { <<
112 compatible = "edt,edt-ft5306"; <<
113 reg = <0x38>; <<
114 <<
115 interrupt-parent = <&tlmm>; <<
116 interrupts = <13 IRQ_TYPE_EDGE <<
117 <<
118 reset-gpios = <&tlmm 12 GPIO_A <<
119 <<
120 vcc-supply = <&pm8916_l11>; <<
121 iovcc-supply = <&pm8916_l6>; <<
122 <<
123 touchscreen-size-x = <720>; <<
124 touchscreen-size-y = <1280>; <<
125 <<
126 pinctrl-names = "default"; <<
127 pinctrl-0 = <&touchscreen_defa <<
128 }; <<
129 }; <<
130 <<
131 &blsp_uart2 { <<
132 status = "okay"; <<
133 }; <<
134 <<
135 &mpss_mem { <<
136 reg = <0x0 0x86800000 0x0 0x5500000>; <<
137 }; <<
138 <<
139 &pm8916_codec { <<
140 qcom,micbias-lvl = <2800>; <<
141 qcom,mbhc-vthreshold-low = <75 150 237 <<
142 qcom,mbhc-vthreshold-high = <75 150 23 <<
143 qcom,micbias1-ext-cap; <<
144 qcom,hphl-jack-type-normally-open; <<
145 }; <<
146 <<
147 &pm8916_rpm_regulators { <<
148 pm8916_l17: l17 { <<
149 regulator-min-microvolt = <285 <<
150 regulator-max-microvolt = <285 <<
151 }; <<
152 }; 57 };
153 58
154 &sdhc_1 { 59 &sdhc_1 {
155 status = "okay"; 60 status = "okay";
156 }; <<
157 <<
158 &sdhc_2 { <<
159 status = "okay"; <<
160 vmmc-supply = <®_sd_vmmc>; <<
161 61
162 pinctrl-names = "default", "sleep"; 62 pinctrl-names = "default", "sleep";
163 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 63 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
164 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 64 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
165 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; <<
166 }; <<
167 <<
168 &sound { <<
169 audio-routing = <<
170 "AMIC1", "MIC BIAS External1", <<
171 "AMIC2", "MIC BIAS Internal2", <<
172 "AMIC3", "MIC BIAS External1"; <<
173 }; 65 };
174 66
175 &usb { 67 &usb {
176 status = "okay"; 68 status = "okay";
177 extcon = <&usb_id>, <&usb_id>; 69 extcon = <&usb_id>, <&usb_id>;
178 }; 70 };
179 71
180 &usb_hs_phy { 72 &usb_hs_phy {
181 extcon = <&usb_id>; 73 extcon = <&usb_id>;
182 }; 74 };
183 75
184 &venus { !! 76 &smd_rpm_regulators {
185 status = "okay"; !! 77 vdd_l1_l2_l3-supply = <&pm8916_s3>;
186 }; !! 78 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 79 vdd_l7-supply = <&pm8916_s4>;
187 80
188 &venus_mem { !! 81 s3 {
189 status = "okay"; !! 82 regulator-min-microvolt = <1200000>;
190 }; !! 83 regulator-max-microvolt = <1300000>;
>> 84 };
191 85
192 &wcnss { !! 86 s4 {
193 status = "okay"; !! 87 regulator-min-microvolt = <1800000>;
194 }; !! 88 regulator-max-microvolt = <2100000>;
>> 89 };
195 90
196 &wcnss_iris { !! 91 l1 {
197 compatible = "qcom,wcn3620"; !! 92 regulator-min-microvolt = <1225000>;
198 }; !! 93 regulator-max-microvolt = <1225000>;
>> 94 };
199 95
200 &wcnss_mem { !! 96 l2 {
201 status = "okay"; !! 97 regulator-min-microvolt = <1200000>;
202 }; !! 98 regulator-max-microvolt = <1200000>;
>> 99 };
203 100
204 &tlmm { !! 101 l4 {
205 gpio_keys_default: gpio-keys-default-s !! 102 regulator-min-microvolt = <2050000>;
206 pins = "gpio107", "gpio117"; !! 103 regulator-max-microvolt = <2050000>;
207 function = "gpio"; !! 104 };
208 105
209 drive-strength = <2>; !! 106 l5 {
210 bias-pull-up; !! 107 regulator-min-microvolt = <1800000>;
>> 108 regulator-max-microvolt = <1800000>;
211 }; 109 };
212 110
213 imu_default: imu-default-state { !! 111 l6 {
214 pins = "gpio36"; !! 112 regulator-min-microvolt = <1800000>;
215 function = "gpio"; !! 113 regulator-max-microvolt = <1800000>;
>> 114 };
216 115
217 drive-strength = <2>; !! 116 l7 {
218 bias-disable; !! 117 regulator-min-microvolt = <1800000>;
>> 118 regulator-max-microvolt = <1800000>;
219 }; 119 };
220 120
221 mag_reset_default: mag-reset-default-s !! 121 l8 {
222 pins = "gpio112"; !! 122 regulator-min-microvolt = <2850000>;
223 function = "gpio"; !! 123 regulator-max-microvolt = <2900000>;
>> 124 };
224 125
225 drive-strength = <2>; !! 126 l9 {
226 bias-disable; !! 127 regulator-min-microvolt = <3300000>;
>> 128 regulator-max-microvolt = <3300000>;
227 }; 129 };
228 130
229 sd_vmmc_en_default: sd-vmmc-en-default !! 131 l10 {
230 pins = "gpio87"; !! 132 regulator-min-microvolt = <2700000>;
231 function = "gpio"; !! 133 regulator-max-microvolt = <2800000>;
>> 134 };
232 135
233 drive-strength = <2>; !! 136 l11 {
234 bias-disable; !! 137 regulator-min-microvolt = <1800000>;
>> 138 regulator-max-microvolt = <2950000>;
>> 139 regulator-allow-set-load;
>> 140 regulator-system-load = <200000>;
235 }; 141 };
236 142
237 sdc2_cd_default: sdc2-cd-default-state !! 143 l12 {
238 pins = "gpio38"; !! 144 regulator-min-microvolt = <1800000>;
239 function = "gpio"; !! 145 regulator-max-microvolt = <2950000>;
240 drive-strength = <2>; !! 146 };
241 bias-disable; !! 147
>> 148 l13 {
>> 149 regulator-min-microvolt = <3075000>;
>> 150 regulator-max-microvolt = <3075000>;
242 }; 151 };
243 152
244 touchscreen_default: touchscreen-defau !! 153 l14 {
245 touch-pins { !! 154 regulator-min-microvolt = <1800000>;
246 pins = "gpio13"; !! 155 regulator-max-microvolt = <3300000>;
247 function = "gpio"; !! 156 };
248 157
249 drive-strength = <2>; !! 158 l15 {
250 bias-pull-up; !! 159 regulator-min-microvolt = <1800000>;
251 }; !! 160 regulator-max-microvolt = <3300000>;
>> 161 };
252 162
253 reset-pins { !! 163 l16 {
254 pins = "gpio12"; !! 164 regulator-min-microvolt = <1800000>;
255 function = "gpio"; !! 165 regulator-max-microvolt = <3300000>;
>> 166 };
256 167
257 drive-strength = <2>; !! 168 l17 {
258 bias-disable; !! 169 regulator-min-microvolt = <2850000>;
259 }; !! 170 regulator-max-microvolt = <2850000>;
>> 171 };
>> 172
>> 173 l18 {
>> 174 regulator-min-microvolt = <2700000>;
>> 175 regulator-max-microvolt = <2700000>;
>> 176 };
>> 177 };
>> 178
>> 179 &msmgpio {
>> 180 gpio_keys_default: gpio-keys-default {
>> 181 pins = "gpio107", "gpio117";
>> 182 function = "gpio";
>> 183
>> 184 drive-strength = <2>;
>> 185 bias-pull-up;
260 }; 186 };
261 187
262 usb_id_default: usb-id-default-state { !! 188 usb_id_default: usb-id-default {
263 pins = "gpio110"; 189 pins = "gpio110";
264 function = "gpio"; 190 function = "gpio";
265 191
266 drive-strength = <8>; 192 drive-strength = <8>;
267 bias-pull-up; 193 bias-pull-up;
268 }; 194 };
269 }; 195 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.