1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
11 9
12 / { 10 / {
13 model = "Asus Zenfone 2 Laser"; 11 model = "Asus Zenfone 2 Laser";
14 compatible = "asus,z00l", "qcom,msm891 12 compatible = "asus,z00l", "qcom,msm8916";
15 chassis-type = "handset"; 13 chassis-type = "handset";
16 14
17 aliases { 15 aliases {
18 mmc0 = &sdhc_1; /* eMMC */ !! 16 serial0 = &blsp1_uart2;
19 mmc1 = &sdhc_2; /* SD card */ <<
20 serial0 = &blsp_uart2; <<
21 }; 17 };
22 18
23 chosen { 19 chosen {
24 stdout-path = "serial0"; 20 stdout-path = "serial0";
25 }; 21 };
26 22
27 gpio-keys { 23 gpio-keys {
28 compatible = "gpio-keys"; 24 compatible = "gpio-keys";
29 25
30 pinctrl-names = "default"; 26 pinctrl-names = "default";
31 pinctrl-0 = <&gpio_keys_defaul 27 pinctrl-0 = <&gpio_keys_default>;
32 28
33 label = "GPIO Buttons"; 29 label = "GPIO Buttons";
34 30
35 button-volume-up { 31 button-volume-up {
36 label = "Volume Up"; 32 label = "Volume Up";
37 gpios = <&tlmm 107 GPI !! 33 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_VOLU 34 linux,code = <KEY_VOLUMEUP>;
39 debounce-interval = <1 35 debounce-interval = <15>;
40 }; 36 };
41 37
42 button-volume-down { 38 button-volume-down {
43 label = "Volume Down"; 39 label = "Volume Down";
44 gpios = <&tlmm 117 GPI !! 40 gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_VOLU 41 linux,code = <KEY_VOLUMEDOWN>;
46 debounce-interval = <1 42 debounce-interval = <15>;
47 }; 43 };
48 }; 44 };
49 45
50 reg_sd_vmmc: regulator-sdcard-vmmc { 46 reg_sd_vmmc: regulator-sdcard-vmmc {
51 compatible = "regulator-fixed" 47 compatible = "regulator-fixed";
52 regulator-name = "sdcard-vmmc" 48 regulator-name = "sdcard-vmmc";
53 regulator-min-microvolt = <295 49 regulator-min-microvolt = <2950000>;
54 regulator-max-microvolt = <295 50 regulator-max-microvolt = <2950000>;
55 51
56 gpio = <&tlmm 87 GPIO_ACTIVE_H !! 52 gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
57 enable-active-high; 53 enable-active-high;
58 54
59 startup-delay-us = <200>; 55 startup-delay-us = <200>;
60 56
61 pinctrl-names = "default"; 57 pinctrl-names = "default";
62 pinctrl-0 = <&sd_vmmc_en_defau 58 pinctrl-0 = <&sd_vmmc_en_default>;
63 }; 59 };
64 60
65 usb_id: usb-id { 61 usb_id: usb-id {
66 compatible = "linux,extcon-usb 62 compatible = "linux,extcon-usb-gpio";
67 id-gpios = <&tlmm 110 GPIO_ACT !! 63 id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
68 pinctrl-names = "default"; 64 pinctrl-names = "default";
69 pinctrl-0 = <&usb_id_default>; 65 pinctrl-0 = <&usb_id_default>;
70 }; 66 };
71 }; 67 };
72 68
73 &blsp_i2c2 { 69 &blsp_i2c2 {
74 status = "okay"; 70 status = "okay";
75 71
76 magnetometer@c { 72 magnetometer@c {
77 compatible = "asahi-kasei,ak09 73 compatible = "asahi-kasei,ak09911";
78 reg = <0x0c>; 74 reg = <0x0c>;
79 75
80 vdd-supply = <&pm8916_l8>; 76 vdd-supply = <&pm8916_l8>;
81 vid-supply = <&pm8916_l6>; 77 vid-supply = <&pm8916_l6>;
82 78
83 reset-gpios = <&tlmm 112 GPIO_ !! 79 reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
84 80
85 pinctrl-names = "default"; 81 pinctrl-names = "default";
86 pinctrl-0 = <&mag_reset_defaul 82 pinctrl-0 = <&mag_reset_default>;
87 }; 83 };
88 84
89 imu@68 { 85 imu@68 {
90 compatible = "invensense,mpu65 86 compatible = "invensense,mpu6515";
91 reg = <0x68>; 87 reg = <0x68>;
92 88
93 interrupt-parent = <&tlmm>; !! 89 interrupt-parent = <&msmgpio>;
94 interrupts = <36 IRQ_TYPE_EDGE 90 interrupts = <36 IRQ_TYPE_EDGE_RISING>;
95 91
96 vdd-supply = <&pm8916_l17>; 92 vdd-supply = <&pm8916_l17>;
97 vddio-supply = <&pm8916_l6>; 93 vddio-supply = <&pm8916_l6>;
98 94
99 pinctrl-names = "default"; 95 pinctrl-names = "default";
100 pinctrl-0 = <&imu_default>; 96 pinctrl-0 = <&imu_default>;
101 97
102 mount-matrix = "1", "0", "0", 98 mount-matrix = "1", "0", "0",
103 "0", "-1", "0", 99 "0", "-1", "0",
104 "0", "0", "1"; 100 "0", "0", "1";
105 }; 101 };
106 }; 102 };
107 103
108 &blsp_i2c5 { 104 &blsp_i2c5 {
109 status = "okay"; 105 status = "okay";
110 106
111 touchscreen@38 { 107 touchscreen@38 {
112 compatible = "edt,edt-ft5306"; 108 compatible = "edt,edt-ft5306";
113 reg = <0x38>; 109 reg = <0x38>;
114 110
115 interrupt-parent = <&tlmm>; !! 111 interrupt-parent = <&msmgpio>;
116 interrupts = <13 IRQ_TYPE_EDGE 112 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
117 113
118 reset-gpios = <&tlmm 12 GPIO_A !! 114 reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
119 115
120 vcc-supply = <&pm8916_l11>; 116 vcc-supply = <&pm8916_l11>;
121 iovcc-supply = <&pm8916_l6>; 117 iovcc-supply = <&pm8916_l6>;
122 118
123 touchscreen-size-x = <720>; 119 touchscreen-size-x = <720>;
124 touchscreen-size-y = <1280>; 120 touchscreen-size-y = <1280>;
125 121
126 pinctrl-names = "default"; 122 pinctrl-names = "default";
127 pinctrl-0 = <&touchscreen_defa 123 pinctrl-0 = <&touchscreen_default>;
128 }; 124 };
129 }; 125 };
130 126
131 &blsp_uart2 { !! 127 &blsp1_uart2 {
132 status = "okay"; 128 status = "okay";
133 }; 129 };
134 130
135 &mpss_mem { !! 131 &pronto {
136 reg = <0x0 0x86800000 0x0 0x5500000>; !! 132 status = "okay";
137 }; <<
138 <<
139 &pm8916_codec { <<
140 qcom,micbias-lvl = <2800>; <<
141 qcom,mbhc-vthreshold-low = <75 150 237 <<
142 qcom,mbhc-vthreshold-high = <75 150 23 <<
143 qcom,micbias1-ext-cap; <<
144 qcom,hphl-jack-type-normally-open; <<
145 }; <<
146 <<
147 &pm8916_rpm_regulators { <<
148 pm8916_l17: l17 { <<
149 regulator-min-microvolt = <285 <<
150 regulator-max-microvolt = <285 <<
151 }; <<
152 }; 133 };
153 134
154 &sdhc_1 { 135 &sdhc_1 {
155 status = "okay"; 136 status = "okay";
>> 137
>> 138 pinctrl-names = "default", "sleep";
>> 139 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 140 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
156 }; 141 };
157 142
158 &sdhc_2 { 143 &sdhc_2 {
159 status = "okay"; 144 status = "okay";
160 vmmc-supply = <®_sd_vmmc>; 145 vmmc-supply = <®_sd_vmmc>;
161 146
162 pinctrl-names = "default", "sleep"; 147 pinctrl-names = "default", "sleep";
163 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 148 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
164 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 149 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
165 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; !! 150 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
166 }; <<
167 <<
168 &sound { <<
169 audio-routing = <<
170 "AMIC1", "MIC BIAS External1", <<
171 "AMIC2", "MIC BIAS Internal2", <<
172 "AMIC3", "MIC BIAS External1"; <<
173 }; 151 };
174 152
175 &usb { 153 &usb {
176 status = "okay"; 154 status = "okay";
177 extcon = <&usb_id>, <&usb_id>; 155 extcon = <&usb_id>, <&usb_id>;
178 }; 156 };
179 157
180 &usb_hs_phy { 158 &usb_hs_phy {
181 extcon = <&usb_id>; 159 extcon = <&usb_id>;
182 }; 160 };
183 161
184 &venus { !! 162 &smd_rpm_regulators {
185 status = "okay"; !! 163 vdd_l1_l2_l3-supply = <&pm8916_s3>;
186 }; !! 164 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 165 vdd_l7-supply = <&pm8916_s4>;
187 166
188 &venus_mem { !! 167 s3 {
189 status = "okay"; !! 168 regulator-min-microvolt = <1200000>;
190 }; !! 169 regulator-max-microvolt = <1300000>;
>> 170 };
191 171
192 &wcnss { !! 172 s4 {
193 status = "okay"; !! 173 regulator-min-microvolt = <1800000>;
194 }; !! 174 regulator-max-microvolt = <2100000>;
>> 175 };
195 176
196 &wcnss_iris { !! 177 l1 {
197 compatible = "qcom,wcn3620"; !! 178 regulator-min-microvolt = <1225000>;
198 }; !! 179 regulator-max-microvolt = <1225000>;
>> 180 };
199 181
200 &wcnss_mem { !! 182 l2 {
201 status = "okay"; !! 183 regulator-min-microvolt = <1200000>;
>> 184 regulator-max-microvolt = <1200000>;
>> 185 };
>> 186
>> 187 l4 {
>> 188 regulator-min-microvolt = <2050000>;
>> 189 regulator-max-microvolt = <2050000>;
>> 190 };
>> 191
>> 192 l5 {
>> 193 regulator-min-microvolt = <1800000>;
>> 194 regulator-max-microvolt = <1800000>;
>> 195 };
>> 196
>> 197 l6 {
>> 198 regulator-min-microvolt = <1800000>;
>> 199 regulator-max-microvolt = <1800000>;
>> 200 };
>> 201
>> 202 l7 {
>> 203 regulator-min-microvolt = <1800000>;
>> 204 regulator-max-microvolt = <1800000>;
>> 205 };
>> 206
>> 207 l8 {
>> 208 regulator-min-microvolt = <2850000>;
>> 209 regulator-max-microvolt = <2900000>;
>> 210 };
>> 211
>> 212 l9 {
>> 213 regulator-min-microvolt = <3300000>;
>> 214 regulator-max-microvolt = <3300000>;
>> 215 };
>> 216
>> 217 l10 {
>> 218 regulator-min-microvolt = <2700000>;
>> 219 regulator-max-microvolt = <2800000>;
>> 220 };
>> 221
>> 222 l11 {
>> 223 regulator-min-microvolt = <1800000>;
>> 224 regulator-max-microvolt = <2950000>;
>> 225 regulator-allow-set-load;
>> 226 regulator-system-load = <200000>;
>> 227 };
>> 228
>> 229 l12 {
>> 230 regulator-min-microvolt = <1800000>;
>> 231 regulator-max-microvolt = <2950000>;
>> 232 };
>> 233
>> 234 l13 {
>> 235 regulator-min-microvolt = <3075000>;
>> 236 regulator-max-microvolt = <3075000>;
>> 237 };
>> 238
>> 239 l14 {
>> 240 regulator-min-microvolt = <1800000>;
>> 241 regulator-max-microvolt = <3300000>;
>> 242 };
>> 243
>> 244 l15 {
>> 245 regulator-min-microvolt = <1800000>;
>> 246 regulator-max-microvolt = <3300000>;
>> 247 };
>> 248
>> 249 l16 {
>> 250 regulator-min-microvolt = <1800000>;
>> 251 regulator-max-microvolt = <3300000>;
>> 252 };
>> 253
>> 254 l17 {
>> 255 regulator-min-microvolt = <2850000>;
>> 256 regulator-max-microvolt = <2850000>;
>> 257 };
>> 258
>> 259 l18 {
>> 260 regulator-min-microvolt = <2700000>;
>> 261 regulator-max-microvolt = <2700000>;
>> 262 };
202 }; 263 };
203 264
204 &tlmm { !! 265 &msmgpio {
205 gpio_keys_default: gpio-keys-default-s !! 266 gpio_keys_default: gpio-keys-default {
206 pins = "gpio107", "gpio117"; 267 pins = "gpio107", "gpio117";
207 function = "gpio"; 268 function = "gpio";
208 269
209 drive-strength = <2>; 270 drive-strength = <2>;
210 bias-pull-up; 271 bias-pull-up;
211 }; 272 };
212 273
213 imu_default: imu-default-state { !! 274 imu_default: imu-default {
214 pins = "gpio36"; 275 pins = "gpio36";
215 function = "gpio"; 276 function = "gpio";
216 277
217 drive-strength = <2>; 278 drive-strength = <2>;
218 bias-disable; 279 bias-disable;
219 }; 280 };
220 281
221 mag_reset_default: mag-reset-default-s !! 282 mag_reset_default: mag-reset-default {
222 pins = "gpio112"; 283 pins = "gpio112";
223 function = "gpio"; 284 function = "gpio";
224 285
225 drive-strength = <2>; 286 drive-strength = <2>;
226 bias-disable; 287 bias-disable;
227 }; 288 };
228 289
229 sd_vmmc_en_default: sd-vmmc-en-default !! 290 sd_vmmc_en_default: sd-vmmc-en-default {
230 pins = "gpio87"; 291 pins = "gpio87";
231 function = "gpio"; 292 function = "gpio";
232 293
233 drive-strength = <2>; 294 drive-strength = <2>;
234 bias-disable; 295 bias-disable;
235 }; 296 };
236 297
237 sdc2_cd_default: sdc2-cd-default-state !! 298 touchscreen_default: touchscreen-default {
238 pins = "gpio38"; !! 299 pins = "gpio13";
239 function = "gpio"; 300 function = "gpio";
240 drive-strength = <2>; <<
241 bias-disable; <<
242 }; <<
243 <<
244 touchscreen_default: touchscreen-defau <<
245 touch-pins { <<
246 pins = "gpio13"; <<
247 function = "gpio"; <<
248 301
249 drive-strength = <2>; !! 302 drive-strength = <2>;
250 bias-pull-up; !! 303 bias-pull-up;
251 }; <<
252 304
253 reset-pins { !! 305 reset {
254 pins = "gpio12"; 306 pins = "gpio12";
255 function = "gpio"; 307 function = "gpio";
256 308
257 drive-strength = <2>; 309 drive-strength = <2>;
258 bias-disable; 310 bias-disable;
259 }; 311 };
260 }; 312 };
261 313
262 usb_id_default: usb-id-default-state { !! 314 usb_id_default: usb-id-default {
263 pins = "gpio110"; 315 pins = "gpio110";
264 function = "gpio"; 316 function = "gpio";
265 317
266 drive-strength = <8>; 318 drive-strength = <8>;
267 bias-pull-up; 319 bias-pull-up;
268 }; 320 };
269 }; 321 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.