1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
12 10
13 / { 11 / {
14 model = "Longcheer L8150"; 12 model = "Longcheer L8150";
15 compatible = "longcheer,l8150", "qcom, !! 13 compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
16 chassis-type = "handset"; <<
17 14
18 aliases { 15 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ !! 16 serial0 = &blsp1_uart2;
20 mmc1 = &sdhc_2; /* SD card */ <<
21 serial0 = &blsp_uart2; <<
22 }; 17 };
23 18
24 chosen { 19 chosen {
25 stdout-path = "serial0"; 20 stdout-path = "serial0";
26 }; 21 };
27 22
28 /* <<
29 * For some reason, the signed wcnss f <<
30 * It must be loaded at 0x8b600000. Un <<
31 * mpss_mem does not fit when loaded t <<
32 * <<
33 * Load wcnss_mem to the fixed address <<
34 * working higher address. For some re <<
35 * boot when placed at 0x8a800000 to 0 <<
36 */ <<
37 reserved-memory { 23 reserved-memory {
38 /delete-node/ mpss@86800000; !! 24 // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
39 /delete-node/ wcnss; !! 25 /delete-node/ wcnss@89300000;
40 26
41 wcnss_mem: wcnss@8b600000 { 27 wcnss_mem: wcnss@8b600000 {
42 reg = <0x0 0x8b600000 28 reg = <0x0 0x8b600000 0x0 0x600000>;
43 no-map; 29 no-map;
44 }; 30 };
45 <<
46 mpss_mem: mpss@8e800000 { <<
47 reg = <0x0 0x8e800000 <<
48 no-map; <<
49 }; <<
50 }; 31 };
51 32
52 battery: battery { !! 33 // FIXME: Use extcon device provided by charger driver when available
53 compatible = "simple-battery"; !! 34 usb_vbus: usb-vbus {
54 voltage-min-design-microvolt = !! 35 compatible = "linux,extcon-usb-gpio";
55 voltage-max-design-microvolt = !! 36 vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
56 energy-full-design-microwatt-h !! 37 pinctrl-names = "default";
57 charge-full-design-microamp-ho !! 38 pinctrl-0 = <&usb_vbus_default>;
58 <<
59 ocv-capacity-celsius = <25>; <<
60 ocv-capacity-table-0 = <433000 <<
61 <4208000 90>, <4153000 <<
62 <4001000 70>, <3962000 <<
63 <3839000 50>, <3817000 <<
64 <3767000 30>, <3747000 <<
65 <3688000 13>, <3681000 <<
66 <3677000 8>, <3674000 <<
67 <3597000 4>, <3537000 <<
68 <3000000 0>; <<
69 }; 39 };
70 40
71 gpio-keys { 41 gpio-keys {
72 compatible = "gpio-keys"; 42 compatible = "gpio-keys";
73 43
74 pinctrl-names = "default"; 44 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_keys_defaul 45 pinctrl-0 = <&gpio_keys_default>;
76 46
77 label = "GPIO Buttons"; 47 label = "GPIO Buttons";
78 48
79 button-volume-up { !! 49 volume-up {
80 label = "Volume Up"; 50 label = "Volume Up";
81 gpios = <&tlmm 107 GPI !! 51 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLU 52 linux,code = <KEY_VOLUMEUP>;
83 }; 53 };
84 }; 54 };
85 55
86 reg_ctp: regulator-ctp { 56 reg_ctp: regulator-ctp {
87 compatible = "regulator-fixed" 57 compatible = "regulator-fixed";
88 regulator-name = "ctp"; 58 regulator-name = "ctp";
89 59
90 regulator-min-microvolt = <280 60 regulator-min-microvolt = <2800000>;
91 regulator-max-microvolt = <280 61 regulator-max-microvolt = <2800000>;
92 62
93 gpio = <&tlmm 17 GPIO_ACTIVE_H !! 63 gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
94 enable-active-high; 64 enable-active-high;
95 65
96 pinctrl-names = "default"; 66 pinctrl-names = "default";
97 pinctrl-0 = <&ctp_pwr_en_defau 67 pinctrl-0 = <&ctp_pwr_en_default>;
98 }; 68 };
99 69
100 flash-led-controller { 70 flash-led-controller {
101 compatible = "sgmicro,sgm3140" 71 compatible = "sgmicro,sgm3140";
102 flash-gpios = <&tlmm 31 GPIO_A !! 72 flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 32 GPIO_ !! 73 enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
104 74
105 pinctrl-names = "default"; 75 pinctrl-names = "default";
106 pinctrl-0 = <&camera_flash_def 76 pinctrl-0 = <&camera_flash_default>;
107 77
108 flash_led: led { 78 flash_led: led {
109 function = LED_FUNCTIO 79 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 80 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 81 flash-max-timeout-us = <250000>;
112 }; 82 };
113 }; 83 };
114 }; 84 };
115 85
116 &blsp_i2c1 { 86 &blsp_i2c1 {
117 status = "okay"; 87 status = "okay";
118 88
119 led-controller@45 { 89 led-controller@45 {
120 compatible = "awinic,aw2013"; 90 compatible = "awinic,aw2013";
121 reg = <0x45>; 91 reg = <0x45>;
122 #address-cells = <1>; 92 #address-cells = <1>;
123 #size-cells = <0>; 93 #size-cells = <0>;
124 94
125 vcc-supply = <&pm8916_l17>; 95 vcc-supply = <&pm8916_l17>;
126 vio-supply = <&pm8916_l6>; <<
127 96
128 led@0 { 97 led@0 {
129 reg = <0>; 98 reg = <0>;
130 led-max-microamp = <50 99 led-max-microamp = <5000>;
131 function = LED_FUNCTIO 100 function = LED_FUNCTION_INDICATOR;
132 color = <LED_COLOR_ID_ 101 color = <LED_COLOR_ID_RED>;
133 }; 102 };
134 103
135 led@1 { 104 led@1 {
136 reg = <1>; 105 reg = <1>;
137 led-max-microamp = <50 106 led-max-microamp = <5000>;
138 function = LED_FUNCTIO 107 function = LED_FUNCTION_INDICATOR;
139 color = <LED_COLOR_ID_ 108 color = <LED_COLOR_ID_GREEN>;
140 }; 109 };
141 110
142 led@2 { 111 led@2 {
143 reg = <2>; 112 reg = <2>;
144 led-max-microamp = <50 113 led-max-microamp = <5000>;
145 function = LED_FUNCTIO 114 function = LED_FUNCTION_INDICATOR;
146 color = <LED_COLOR_ID_ 115 color = <LED_COLOR_ID_BLUE>;
147 }; 116 };
148 }; 117 };
149 }; 118 };
150 119
151 &blsp_i2c2 { 120 &blsp_i2c2 {
152 status = "okay"; 121 status = "okay";
153 122
154 accelerometer@10 { 123 accelerometer@10 {
155 compatible = "bosch,bmc156_acc !! 124 compatible = "bosch,bmc150_accel";
156 reg = <0x10>; 125 reg = <0x10>;
157 126
158 /* <<
159 * For some reason the interru <<
160 * to the BMC156. However, the <<
161 * that can be shorted to make <<
162 * <<
163 * interrupt-parent = <&tlmm>; <<
164 * interrupts = <116 IRQ_TYPE_ <<
165 */ <<
166 <<
167 pinctrl-names = "default"; <<
168 pinctrl-0 = <&accel_int_defaul <<
169 <<
170 vdd-supply = <&pm8916_l17>; 127 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 128 vddio-supply = <&pm8916_l6>;
172 129
173 mount-matrix = "0", "1", "0", 130 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 131 "-1", "0", "0",
175 "0", "0", "1"; 132 "0", "0", "1";
176 }; 133 };
177 134
178 magnetometer@12 { 135 magnetometer@12 {
179 compatible = "bosch,bmc156_mag !! 136 compatible = "bosch,bmc150_magn";
180 reg = <0x12>; 137 reg = <0x12>;
181 138
182 interrupt-parent = <&tlmm>; <<
183 interrupts = <113 IRQ_TYPE_EDG <<
184 <<
185 pinctrl-names = "default"; <<
186 pinctrl-0 = <&magn_int_default <<
187 <<
188 vdd-supply = <&pm8916_l17>; <<
189 vddio-supply = <&pm8916_l6>; <<
190 }; <<
191 <<
192 light-sensor@23 { <<
193 compatible = "liteon,ltr559"; <<
194 reg = <0x23>; <<
195 proximity-near-level = <75>; <<
196 <<
197 interrupt-parent = <&tlmm>; <<
198 interrupts = <115 IRQ_TYPE_EDG <<
199 <<
200 pinctrl-names = "default"; <<
201 pinctrl-0 = <&light_int_defaul <<
202 <<
203 vdd-supply = <&pm8916_l17>; 139 vdd-supply = <&pm8916_l17>;
204 vddio-supply = <&pm8916_l6>; 140 vddio-supply = <&pm8916_l6>;
205 }; 141 };
206 142
207 gyroscope@68 { 143 gyroscope@68 {
208 compatible = "bosch,bmg160"; 144 compatible = "bosch,bmg160";
209 reg = <0x68>; 145 reg = <0x68>;
210 146
211 interrupt-parent = <&tlmm>; !! 147 interrupt-parent = <&msmgpio>;
212 interrupts = <23 IRQ_TYPE_EDGE !! 148 interrupts = <23 IRQ_TYPE_EDGE_RISING>;
213 <22 IRQ_TYPE_EDGE <<
214 149
215 pinctrl-names = "default"; 150 pinctrl-names = "default";
216 pinctrl-0 = <&gyro_int_default 151 pinctrl-0 = <&gyro_int_default>;
217 152
218 vdd-supply = <&pm8916_l17>; 153 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 154 vddio-supply = <&pm8916_l6>;
220 }; 155 };
221 }; 156 };
222 157
223 &blsp_i2c5 { 158 &blsp_i2c5 {
224 status = "okay"; 159 status = "okay";
225 160
226 rmi4@20 { 161 rmi4@20 {
227 compatible = "syna,rmi4-i2c"; 162 compatible = "syna,rmi4-i2c";
228 reg = <0x20>; 163 reg = <0x20>;
229 #address-cells = <1>; 164 #address-cells = <1>;
230 #size-cells = <0>; 165 #size-cells = <0>;
231 166
232 interrupt-parent = <&tlmm>; !! 167 interrupt-parent = <&msmgpio>;
233 interrupts = <13 IRQ_TYPE_EDGE 168 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
234 169
235 vdd-supply = <®_ctp>; 170 vdd-supply = <®_ctp>;
236 vio-supply = <&pm8916_l6>; 171 vio-supply = <&pm8916_l6>;
237 172
238 pinctrl-names = "default"; 173 pinctrl-names = "default";
239 pinctrl-0 = <&tp_int_default>; 174 pinctrl-0 = <&tp_int_default>;
240 175
241 syna,startup-delay-ms = <10>; 176 syna,startup-delay-ms = <10>;
242 177
243 rmi4-f01@1 { 178 rmi4-f01@1 {
244 reg = <0x1>; 179 reg = <0x1>;
245 syna,nosleep-mode = <1 !! 180 syna,nosleep-mode = <1>; // Allow sleeping
246 }; 181 };
247 182
248 rmi4-f12@12 { 183 rmi4-f12@12 {
249 reg = <0x12>; 184 reg = <0x12>;
250 syna,sensor-type = <1> !! 185 syna,sensor-type = <1>; // Touchscreen
251 }; 186 };
252 }; 187 };
253 }; 188 };
254 189
255 &blsp_uart2 { !! 190 &blsp1_uart2 {
256 status = "okay"; 191 status = "okay";
257 }; 192 };
258 193
259 &pm8916_bms { <<
260 status = "okay"; <<
261 <<
262 monitored-battery = <&battery>; <<
263 power-supplies = <&pm8916_charger>; <<
264 }; <<
265 <<
266 &pm8916_charger { <<
267 status = "okay"; <<
268 <<
269 monitored-battery = <&battery>; <<
270 <<
271 qcom,fast-charge-safe-current = <90000 <<
272 qcom,fast-charge-safe-voltage = <43000 <<
273 }; <<
274 <<
275 &pm8916_codec { <<
276 qcom,micbias-lvl = <2800>; <<
277 qcom,mbhc-vthreshold-low = <75 150 237 <<
278 qcom,mbhc-vthreshold-high = <75 150 23 <<
279 qcom,hphl-jack-type-normally-open; <<
280 }; <<
281 <<
282 &pm8916_resin { 194 &pm8916_resin {
283 status = "okay"; 195 status = "okay";
284 linux,code = <KEY_VOLUMEDOWN>; 196 linux,code = <KEY_VOLUMEDOWN>;
285 }; 197 };
286 198
287 &pm8916_rpm_regulators { !! 199 &pm8916_vib {
288 pm8916_l17: l17 { !! 200 status = "okay";
289 regulator-min-microvolt = <285 <<
290 regulator-max-microvolt = <285 <<
291 }; <<
292 }; 201 };
293 202
294 &pm8916_vib { !! 203 &pronto {
295 status = "okay"; 204 status = "okay";
296 }; 205 };
297 206
298 &sdhc_1 { 207 &sdhc_1 {
299 status = "okay"; 208 status = "okay";
>> 209
>> 210 pinctrl-names = "default", "sleep";
>> 211 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 212 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
300 }; 213 };
301 214
302 &sdhc_2 { 215 &sdhc_2 {
303 status = "okay"; 216 status = "okay";
304 non-removable; <<
305 }; <<
306 217
307 &sound { !! 218 pinctrl-names = "default", "sleep";
308 audio-routing = !! 219 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
309 "AMIC1", "MIC BIAS Internal1", !! 220 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
310 "AMIC2", "MIC BIAS Internal2", !! 221
311 "AMIC3", "MIC BIAS Internal3"; !! 222 non-removable;
312 }; 223 };
313 224
314 &usb { 225 &usb {
315 status = "okay"; 226 status = "okay";
316 dr_mode = "peripheral"; 227 dr_mode = "peripheral";
317 extcon = <&pm8916_charger>; !! 228 extcon = <&usb_vbus>;
318 }; 229 };
319 230
320 &usb_hs_phy { 231 &usb_hs_phy {
321 extcon = <&pm8916_charger>; !! 232 extcon = <&usb_vbus>;
322 }; 233 };
323 234
324 &venus { !! 235 &smd_rpm_regulators {
325 status = "okay"; !! 236 vdd_l1_l2_l3-supply = <&pm8916_s3>;
326 }; !! 237 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 238 vdd_l7-supply = <&pm8916_s4>;
327 239
328 &venus_mem { !! 240 s3 {
329 status = "okay"; !! 241 regulator-min-microvolt = <1200000>;
330 }; !! 242 regulator-max-microvolt = <1300000>;
>> 243 };
331 244
332 &wcnss { !! 245 s4 {
333 status = "okay"; !! 246 regulator-min-microvolt = <1800000>;
334 }; !! 247 regulator-max-microvolt = <2100000>;
>> 248 };
335 249
336 &wcnss_iris { !! 250 l1 {
337 compatible = "qcom,wcn3620"; !! 251 regulator-min-microvolt = <1225000>;
338 }; !! 252 regulator-max-microvolt = <1225000>;
>> 253 };
339 254
340 &wcnss_mem { !! 255 l2 {
341 status = "okay"; !! 256 regulator-min-microvolt = <1200000>;
342 }; !! 257 regulator-max-microvolt = <1200000>;
>> 258 };
343 259
344 &tlmm { !! 260 l4 {
345 accel_int_default: accel-int-default-s !! 261 regulator-min-microvolt = <2050000>;
346 pins = "gpio116"; !! 262 regulator-max-microvolt = <2050000>;
347 function = "gpio"; !! 263 };
348 264
349 drive-strength = <2>; !! 265 l5 {
350 bias-disable; !! 266 regulator-min-microvolt = <1800000>;
>> 267 regulator-max-microvolt = <1800000>;
>> 268 };
>> 269
>> 270 l6 {
>> 271 regulator-min-microvolt = <1800000>;
>> 272 regulator-max-microvolt = <1800000>;
>> 273 };
>> 274
>> 275 l7 {
>> 276 regulator-min-microvolt = <1800000>;
>> 277 regulator-max-microvolt = <1800000>;
>> 278 };
>> 279
>> 280 l8 {
>> 281 regulator-min-microvolt = <2850000>;
>> 282 regulator-max-microvolt = <2900000>;
>> 283 };
>> 284
>> 285 l9 {
>> 286 regulator-min-microvolt = <3300000>;
>> 287 regulator-max-microvolt = <3300000>;
>> 288 };
>> 289
>> 290 l10 {
>> 291 regulator-min-microvolt = <2700000>;
>> 292 regulator-max-microvolt = <2800000>;
>> 293 };
>> 294
>> 295 l11 {
>> 296 regulator-min-microvolt = <1800000>;
>> 297 regulator-max-microvolt = <2950000>;
>> 298 regulator-allow-set-load;
>> 299 regulator-system-load = <200000>;
>> 300 };
>> 301
>> 302 l12 {
>> 303 regulator-min-microvolt = <1800000>;
>> 304 regulator-max-microvolt = <2950000>;
>> 305 };
>> 306
>> 307 l13 {
>> 308 regulator-min-microvolt = <3075000>;
>> 309 regulator-max-microvolt = <3075000>;
>> 310 };
>> 311
>> 312 l14 {
>> 313 regulator-min-microvolt = <1800000>;
>> 314 regulator-max-microvolt = <3300000>;
>> 315 };
>> 316
>> 317 l15 {
>> 318 regulator-min-microvolt = <1800000>;
>> 319 regulator-max-microvolt = <3300000>;
>> 320 };
>> 321
>> 322 l16 {
>> 323 regulator-min-microvolt = <1800000>;
>> 324 regulator-max-microvolt = <3300000>;
351 }; 325 };
352 326
353 camera_flash_default: camera-flash-def !! 327 l17 {
>> 328 regulator-min-microvolt = <2850000>;
>> 329 regulator-max-microvolt = <2850000>;
>> 330 };
>> 331
>> 332 l18 {
>> 333 regulator-min-microvolt = <2700000>;
>> 334 regulator-max-microvolt = <2700000>;
>> 335 };
>> 336 };
>> 337
>> 338 &msmgpio {
>> 339 camera_flash_default: camera-flash-default {
354 pins = "gpio31", "gpio32"; 340 pins = "gpio31", "gpio32";
355 function = "gpio"; 341 function = "gpio";
356 342
357 drive-strength = <2>; 343 drive-strength = <2>;
358 bias-disable; 344 bias-disable;
359 }; 345 };
360 346
361 ctp_pwr_en_default: ctp-pwr-en-default !! 347 ctp_pwr_en_default: ctp-pwr-en-default {
362 pins = "gpio17"; 348 pins = "gpio17";
363 function = "gpio"; 349 function = "gpio";
364 350
365 drive-strength = <2>; 351 drive-strength = <2>;
366 bias-disable; 352 bias-disable;
367 }; 353 };
368 354
369 gpio_keys_default: gpio-keys-default-s !! 355 gpio_keys_default: gpio-keys-default {
370 pins = "gpio107"; 356 pins = "gpio107";
371 function = "gpio"; 357 function = "gpio";
372 358
373 drive-strength = <2>; 359 drive-strength = <2>;
374 bias-pull-up; 360 bias-pull-up;
375 }; 361 };
376 362
377 gyro_int_default: gyro-int-default-sta !! 363 gyro_int_default: gyro-int-default {
378 pins = "gpio22", "gpio23"; !! 364 pins = "gpio23";
379 function = "gpio"; <<
380 <<
381 drive-strength = <2>; <<
382 bias-disable; <<
383 }; <<
384 <<
385 light_int_default: light-int-default-s <<
386 pins = "gpio115"; <<
387 function = "gpio"; 365 function = "gpio";
388 366
389 drive-strength = <2>; 367 drive-strength = <2>;
390 bias-disable; 368 bias-disable;
391 }; 369 };
392 370
393 magn_int_default: magn-int-default-sta !! 371 tp_int_default: tp-int-default {
394 pins = "gpio113"; !! 372 pins = "gpio13";
395 function = "gpio"; 373 function = "gpio";
396 374
397 drive-strength = <2>; 375 drive-strength = <2>;
398 bias-disable; 376 bias-disable;
399 }; 377 };
400 378
401 tp_int_default: tp-int-default-state { !! 379 usb_vbus_default: usb-vbus-default {
402 pins = "gpio13"; !! 380 pins = "gpio62";
403 function = "gpio"; 381 function = "gpio";
404 382
405 drive-strength = <2>; !! 383 bias-pull-up;
406 bias-disable; <<
407 }; 384 };
408 }; 385 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.