1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
12 10
13 / { 11 / {
14 model = "Longcheer L8150"; 12 model = "Longcheer L8150";
15 compatible = "longcheer,l8150", "qcom, !! 13 compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
16 chassis-type = "handset"; 14 chassis-type = "handset";
17 15
18 aliases { 16 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ !! 17 serial0 = &blsp1_uart2;
20 mmc1 = &sdhc_2; /* SD card */ <<
21 serial0 = &blsp_uart2; <<
22 }; 18 };
23 19
24 chosen { 20 chosen {
25 stdout-path = "serial0"; 21 stdout-path = "serial0";
26 }; 22 };
27 23
28 /* <<
29 * For some reason, the signed wcnss f <<
30 * It must be loaded at 0x8b600000. Un <<
31 * mpss_mem does not fit when loaded t <<
32 * <<
33 * Load wcnss_mem to the fixed address <<
34 * working higher address. For some re <<
35 * boot when placed at 0x8a800000 to 0 <<
36 */ <<
37 reserved-memory { 24 reserved-memory {
38 /delete-node/ mpss@86800000; !! 25 // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000
39 /delete-node/ wcnss; !! 26 /delete-node/ wcnss@89300000;
40 27
41 wcnss_mem: wcnss@8b600000 { 28 wcnss_mem: wcnss@8b600000 {
42 reg = <0x0 0x8b600000 29 reg = <0x0 0x8b600000 0x0 0x600000>;
43 no-map; 30 no-map;
44 }; 31 };
45 <<
46 mpss_mem: mpss@8e800000 { <<
47 reg = <0x0 0x8e800000 <<
48 no-map; <<
49 }; <<
50 }; <<
51 <<
52 battery: battery { <<
53 compatible = "simple-battery"; <<
54 voltage-min-design-microvolt = <<
55 voltage-max-design-microvolt = <<
56 energy-full-design-microwatt-h <<
57 charge-full-design-microamp-ho <<
58 <<
59 ocv-capacity-celsius = <25>; <<
60 ocv-capacity-table-0 = <433000 <<
61 <4208000 90>, <4153000 <<
62 <4001000 70>, <3962000 <<
63 <3839000 50>, <3817000 <<
64 <3767000 30>, <3747000 <<
65 <3688000 13>, <3681000 <<
66 <3677000 8>, <3674000 <<
67 <3597000 4>, <3537000 <<
68 <3000000 0>; <<
69 }; 32 };
70 33
71 gpio-keys { 34 gpio-keys {
72 compatible = "gpio-keys"; 35 compatible = "gpio-keys";
73 36
74 pinctrl-names = "default"; 37 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_keys_defaul 38 pinctrl-0 = <&gpio_keys_default>;
76 39
77 label = "GPIO Buttons"; 40 label = "GPIO Buttons";
78 41
79 button-volume-up { !! 42 volume-up {
80 label = "Volume Up"; 43 label = "Volume Up";
81 gpios = <&tlmm 107 GPI !! 44 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLU 45 linux,code = <KEY_VOLUMEUP>;
83 }; 46 };
84 }; 47 };
85 48
86 reg_ctp: regulator-ctp { 49 reg_ctp: regulator-ctp {
87 compatible = "regulator-fixed" 50 compatible = "regulator-fixed";
88 regulator-name = "ctp"; 51 regulator-name = "ctp";
89 52
90 regulator-min-microvolt = <280 53 regulator-min-microvolt = <2800000>;
91 regulator-max-microvolt = <280 54 regulator-max-microvolt = <2800000>;
92 55
93 gpio = <&tlmm 17 GPIO_ACTIVE_H !! 56 gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
94 enable-active-high; 57 enable-active-high;
95 58
96 pinctrl-names = "default"; 59 pinctrl-names = "default";
97 pinctrl-0 = <&ctp_pwr_en_defau 60 pinctrl-0 = <&ctp_pwr_en_default>;
98 }; 61 };
99 62
100 flash-led-controller { 63 flash-led-controller {
101 compatible = "sgmicro,sgm3140" 64 compatible = "sgmicro,sgm3140";
102 flash-gpios = <&tlmm 31 GPIO_A !! 65 flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 32 GPIO_ !! 66 enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
104 67
105 pinctrl-names = "default"; 68 pinctrl-names = "default";
106 pinctrl-0 = <&camera_flash_def 69 pinctrl-0 = <&camera_flash_default>;
107 70
108 flash_led: led { 71 flash_led: led {
109 function = LED_FUNCTIO 72 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 73 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 74 flash-max-timeout-us = <250000>;
112 }; 75 };
113 }; 76 };
114 }; 77 };
115 78
116 &blsp_i2c1 { 79 &blsp_i2c1 {
117 status = "okay"; 80 status = "okay";
118 81
119 led-controller@45 { 82 led-controller@45 {
120 compatible = "awinic,aw2013"; 83 compatible = "awinic,aw2013";
121 reg = <0x45>; 84 reg = <0x45>;
122 #address-cells = <1>; 85 #address-cells = <1>;
123 #size-cells = <0>; 86 #size-cells = <0>;
124 87
125 vcc-supply = <&pm8916_l17>; 88 vcc-supply = <&pm8916_l17>;
126 vio-supply = <&pm8916_l6>; <<
127 89
128 led@0 { 90 led@0 {
129 reg = <0>; 91 reg = <0>;
130 led-max-microamp = <50 92 led-max-microamp = <5000>;
131 function = LED_FUNCTIO 93 function = LED_FUNCTION_INDICATOR;
132 color = <LED_COLOR_ID_ 94 color = <LED_COLOR_ID_RED>;
133 }; 95 };
134 96
135 led@1 { 97 led@1 {
136 reg = <1>; 98 reg = <1>;
137 led-max-microamp = <50 99 led-max-microamp = <5000>;
138 function = LED_FUNCTIO 100 function = LED_FUNCTION_INDICATOR;
139 color = <LED_COLOR_ID_ 101 color = <LED_COLOR_ID_GREEN>;
140 }; 102 };
141 103
142 led@2 { 104 led@2 {
143 reg = <2>; 105 reg = <2>;
144 led-max-microamp = <50 106 led-max-microamp = <5000>;
145 function = LED_FUNCTIO 107 function = LED_FUNCTION_INDICATOR;
146 color = <LED_COLOR_ID_ 108 color = <LED_COLOR_ID_BLUE>;
147 }; 109 };
148 }; 110 };
149 }; 111 };
150 112
151 &blsp_i2c2 { 113 &blsp_i2c2 {
152 status = "okay"; 114 status = "okay";
153 115
154 accelerometer@10 { 116 accelerometer@10 {
155 compatible = "bosch,bmc156_acc 117 compatible = "bosch,bmc156_accel";
156 reg = <0x10>; 118 reg = <0x10>;
157 119
158 /* 120 /*
159 * For some reason the interru 121 * For some reason the interrupt line is usually not connected
160 * to the BMC156. However, the 122 * to the BMC156. However, there are two pads next to the chip
161 * that can be shorted to make 123 * that can be shorted to make it work if needed.
162 * 124 *
163 * interrupt-parent = <&tlmm>; !! 125 * interrupt-parent = <&msmgpio>;
164 * interrupts = <116 IRQ_TYPE_ 126 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
165 */ 127 */
166 128
167 pinctrl-names = "default"; 129 pinctrl-names = "default";
168 pinctrl-0 = <&accel_int_defaul 130 pinctrl-0 = <&accel_int_default>;
169 131
170 vdd-supply = <&pm8916_l17>; 132 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 133 vddio-supply = <&pm8916_l6>;
172 134
173 mount-matrix = "0", "1", "0", 135 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 136 "-1", "0", "0",
175 "0", "0", "1"; 137 "0", "0", "1";
176 }; 138 };
177 139
178 magnetometer@12 { 140 magnetometer@12 {
179 compatible = "bosch,bmc156_mag 141 compatible = "bosch,bmc156_magn";
180 reg = <0x12>; 142 reg = <0x12>;
181 143
182 interrupt-parent = <&tlmm>; !! 144 interrupt-parent = <&msmgpio>;
183 interrupts = <113 IRQ_TYPE_EDG 145 interrupts = <113 IRQ_TYPE_EDGE_RISING>;
184 146
185 pinctrl-names = "default"; 147 pinctrl-names = "default";
186 pinctrl-0 = <&magn_int_default 148 pinctrl-0 = <&magn_int_default>;
187 149
188 vdd-supply = <&pm8916_l17>; 150 vdd-supply = <&pm8916_l17>;
189 vddio-supply = <&pm8916_l6>; 151 vddio-supply = <&pm8916_l6>;
190 }; 152 };
191 153
192 light-sensor@23 { <<
193 compatible = "liteon,ltr559"; <<
194 reg = <0x23>; <<
195 proximity-near-level = <75>; <<
196 <<
197 interrupt-parent = <&tlmm>; <<
198 interrupts = <115 IRQ_TYPE_EDG <<
199 <<
200 pinctrl-names = "default"; <<
201 pinctrl-0 = <&light_int_defaul <<
202 <<
203 vdd-supply = <&pm8916_l17>; <<
204 vddio-supply = <&pm8916_l6>; <<
205 }; <<
206 <<
207 gyroscope@68 { 154 gyroscope@68 {
208 compatible = "bosch,bmg160"; 155 compatible = "bosch,bmg160";
209 reg = <0x68>; 156 reg = <0x68>;
210 157
211 interrupt-parent = <&tlmm>; !! 158 interrupt-parent = <&msmgpio>;
212 interrupts = <23 IRQ_TYPE_EDGE 159 interrupts = <23 IRQ_TYPE_EDGE_RISING>,
213 <22 IRQ_TYPE_EDGE 160 <22 IRQ_TYPE_EDGE_RISING>;
214 161
215 pinctrl-names = "default"; 162 pinctrl-names = "default";
216 pinctrl-0 = <&gyro_int_default 163 pinctrl-0 = <&gyro_int_default>;
217 164
218 vdd-supply = <&pm8916_l17>; 165 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 166 vddio-supply = <&pm8916_l6>;
220 }; 167 };
221 }; 168 };
222 169
223 &blsp_i2c5 { 170 &blsp_i2c5 {
224 status = "okay"; 171 status = "okay";
225 172
226 rmi4@20 { 173 rmi4@20 {
227 compatible = "syna,rmi4-i2c"; 174 compatible = "syna,rmi4-i2c";
228 reg = <0x20>; 175 reg = <0x20>;
229 #address-cells = <1>; 176 #address-cells = <1>;
230 #size-cells = <0>; 177 #size-cells = <0>;
231 178
232 interrupt-parent = <&tlmm>; !! 179 interrupt-parent = <&msmgpio>;
233 interrupts = <13 IRQ_TYPE_EDGE 180 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
234 181
235 vdd-supply = <®_ctp>; 182 vdd-supply = <®_ctp>;
236 vio-supply = <&pm8916_l6>; 183 vio-supply = <&pm8916_l6>;
237 184
238 pinctrl-names = "default"; 185 pinctrl-names = "default";
239 pinctrl-0 = <&tp_int_default>; 186 pinctrl-0 = <&tp_int_default>;
240 187
241 syna,startup-delay-ms = <10>; 188 syna,startup-delay-ms = <10>;
242 189
243 rmi4-f01@1 { 190 rmi4-f01@1 {
244 reg = <0x1>; 191 reg = <0x1>;
245 syna,nosleep-mode = <1 !! 192 syna,nosleep-mode = <1>; // Allow sleeping
246 }; 193 };
247 194
248 rmi4-f12@12 { 195 rmi4-f12@12 {
249 reg = <0x12>; 196 reg = <0x12>;
250 syna,sensor-type = <1> !! 197 syna,sensor-type = <1>; // Touchscreen
251 }; 198 };
252 }; 199 };
253 }; 200 };
254 201
255 &blsp_uart2 { !! 202 &blsp1_uart2 {
256 status = "okay"; 203 status = "okay";
257 }; 204 };
258 205
259 &pm8916_bms { !! 206 &pm8916_resin {
260 status = "okay"; 207 status = "okay";
261 !! 208 linux,code = <KEY_VOLUMEDOWN>;
262 monitored-battery = <&battery>; <<
263 power-supplies = <&pm8916_charger>; <<
264 }; 209 };
265 210
266 &pm8916_charger { !! 211 &pm8916_usbin {
267 status = "okay"; 212 status = "okay";
268 <<
269 monitored-battery = <&battery>; <<
270 <<
271 qcom,fast-charge-safe-current = <90000 <<
272 qcom,fast-charge-safe-voltage = <43000 <<
273 }; <<
274 <<
275 &pm8916_codec { <<
276 qcom,micbias-lvl = <2800>; <<
277 qcom,mbhc-vthreshold-low = <75 150 237 <<
278 qcom,mbhc-vthreshold-high = <75 150 23 <<
279 qcom,hphl-jack-type-normally-open; <<
280 }; 213 };
281 214
282 &pm8916_resin { !! 215 &pm8916_vib {
283 status = "okay"; 216 status = "okay";
284 linux,code = <KEY_VOLUMEDOWN>; <<
285 }; 217 };
286 218
287 &pm8916_rpm_regulators { !! 219 &pronto {
288 pm8916_l17: l17 { <<
289 regulator-min-microvolt = <285 <<
290 regulator-max-microvolt = <285 <<
291 }; <<
292 }; <<
293 <<
294 &pm8916_vib { <<
295 status = "okay"; 220 status = "okay";
296 }; 221 };
297 222
298 &sdhc_1 { 223 &sdhc_1 {
299 status = "okay"; 224 status = "okay";
>> 225
>> 226 pinctrl-names = "default", "sleep";
>> 227 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 228 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
300 }; 229 };
301 230
302 &sdhc_2 { 231 &sdhc_2 {
303 status = "okay"; 232 status = "okay";
304 non-removable; <<
305 }; <<
306 233
307 &sound { !! 234 pinctrl-names = "default", "sleep";
308 audio-routing = !! 235 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
309 "AMIC1", "MIC BIAS Internal1", !! 236 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
310 "AMIC2", "MIC BIAS Internal2", !! 237
311 "AMIC3", "MIC BIAS Internal3"; !! 238 non-removable;
312 }; 239 };
313 240
314 &usb { 241 &usb {
315 status = "okay"; 242 status = "okay";
316 dr_mode = "peripheral"; 243 dr_mode = "peripheral";
317 extcon = <&pm8916_charger>; !! 244 extcon = <&pm8916_usbin>;
318 }; 245 };
319 246
320 &usb_hs_phy { 247 &usb_hs_phy {
321 extcon = <&pm8916_charger>; !! 248 extcon = <&pm8916_usbin>;
322 }; 249 };
323 250
324 &venus { !! 251 &smd_rpm_regulators {
325 status = "okay"; !! 252 vdd_l1_l2_l3-supply = <&pm8916_s3>;
326 }; !! 253 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 254 vdd_l7-supply = <&pm8916_s4>;
327 255
328 &venus_mem { !! 256 s3 {
329 status = "okay"; !! 257 regulator-min-microvolt = <1200000>;
330 }; !! 258 regulator-max-microvolt = <1300000>;
>> 259 };
331 260
332 &wcnss { !! 261 s4 {
333 status = "okay"; !! 262 regulator-min-microvolt = <1800000>;
334 }; !! 263 regulator-max-microvolt = <2100000>;
>> 264 };
335 265
336 &wcnss_iris { !! 266 l1 {
337 compatible = "qcom,wcn3620"; !! 267 regulator-min-microvolt = <1225000>;
338 }; !! 268 regulator-max-microvolt = <1225000>;
>> 269 };
339 270
340 &wcnss_mem { !! 271 l2 {
341 status = "okay"; !! 272 regulator-min-microvolt = <1200000>;
>> 273 regulator-max-microvolt = <1200000>;
>> 274 };
>> 275
>> 276 l4 {
>> 277 regulator-min-microvolt = <2050000>;
>> 278 regulator-max-microvolt = <2050000>;
>> 279 };
>> 280
>> 281 l5 {
>> 282 regulator-min-microvolt = <1800000>;
>> 283 regulator-max-microvolt = <1800000>;
>> 284 };
>> 285
>> 286 l6 {
>> 287 regulator-min-microvolt = <1800000>;
>> 288 regulator-max-microvolt = <1800000>;
>> 289 };
>> 290
>> 291 l7 {
>> 292 regulator-min-microvolt = <1800000>;
>> 293 regulator-max-microvolt = <1800000>;
>> 294 };
>> 295
>> 296 l8 {
>> 297 regulator-min-microvolt = <2850000>;
>> 298 regulator-max-microvolt = <2900000>;
>> 299 };
>> 300
>> 301 l9 {
>> 302 regulator-min-microvolt = <3300000>;
>> 303 regulator-max-microvolt = <3300000>;
>> 304 };
>> 305
>> 306 l10 {
>> 307 regulator-min-microvolt = <2700000>;
>> 308 regulator-max-microvolt = <2800000>;
>> 309 };
>> 310
>> 311 l11 {
>> 312 regulator-min-microvolt = <1800000>;
>> 313 regulator-max-microvolt = <2950000>;
>> 314 regulator-allow-set-load;
>> 315 regulator-system-load = <200000>;
>> 316 };
>> 317
>> 318 l12 {
>> 319 regulator-min-microvolt = <1800000>;
>> 320 regulator-max-microvolt = <2950000>;
>> 321 };
>> 322
>> 323 l13 {
>> 324 regulator-min-microvolt = <3075000>;
>> 325 regulator-max-microvolt = <3075000>;
>> 326 };
>> 327
>> 328 l14 {
>> 329 regulator-min-microvolt = <1800000>;
>> 330 regulator-max-microvolt = <3300000>;
>> 331 };
>> 332
>> 333 l15 {
>> 334 regulator-min-microvolt = <1800000>;
>> 335 regulator-max-microvolt = <3300000>;
>> 336 };
>> 337
>> 338 l16 {
>> 339 regulator-min-microvolt = <1800000>;
>> 340 regulator-max-microvolt = <3300000>;
>> 341 };
>> 342
>> 343 l17 {
>> 344 regulator-min-microvolt = <2850000>;
>> 345 regulator-max-microvolt = <2850000>;
>> 346 };
>> 347
>> 348 l18 {
>> 349 regulator-min-microvolt = <2700000>;
>> 350 regulator-max-microvolt = <2700000>;
>> 351 };
342 }; 352 };
343 353
344 &tlmm { !! 354 &msmgpio {
345 accel_int_default: accel-int-default-s !! 355 accel_int_default: accel-int-default {
346 pins = "gpio116"; 356 pins = "gpio116";
347 function = "gpio"; 357 function = "gpio";
348 358
349 drive-strength = <2>; 359 drive-strength = <2>;
350 bias-disable; 360 bias-disable;
351 }; 361 };
352 362
353 camera_flash_default: camera-flash-def !! 363 camera_flash_default: camera-flash-default {
354 pins = "gpio31", "gpio32"; 364 pins = "gpio31", "gpio32";
355 function = "gpio"; 365 function = "gpio";
356 366
357 drive-strength = <2>; 367 drive-strength = <2>;
358 bias-disable; 368 bias-disable;
359 }; 369 };
360 370
361 ctp_pwr_en_default: ctp-pwr-en-default !! 371 ctp_pwr_en_default: ctp-pwr-en-default {
362 pins = "gpio17"; 372 pins = "gpio17";
363 function = "gpio"; 373 function = "gpio";
364 374
365 drive-strength = <2>; 375 drive-strength = <2>;
366 bias-disable; 376 bias-disable;
367 }; 377 };
368 378
369 gpio_keys_default: gpio-keys-default-s !! 379 gpio_keys_default: gpio-keys-default {
370 pins = "gpio107"; 380 pins = "gpio107";
371 function = "gpio"; 381 function = "gpio";
372 382
373 drive-strength = <2>; 383 drive-strength = <2>;
374 bias-pull-up; 384 bias-pull-up;
375 }; 385 };
376 386
377 gyro_int_default: gyro-int-default-sta !! 387 gyro_int_default: gyro-int-default {
378 pins = "gpio22", "gpio23"; 388 pins = "gpio22", "gpio23";
379 function = "gpio"; 389 function = "gpio";
380 390
381 drive-strength = <2>; 391 drive-strength = <2>;
382 bias-disable; 392 bias-disable;
383 }; 393 };
384 394
385 light_int_default: light-int-default-s !! 395 magn_int_default: magn-int-default {
386 pins = "gpio115"; <<
387 function = "gpio"; <<
388 <<
389 drive-strength = <2>; <<
390 bias-disable; <<
391 }; <<
392 <<
393 magn_int_default: magn-int-default-sta <<
394 pins = "gpio113"; 396 pins = "gpio113";
395 function = "gpio"; 397 function = "gpio";
396 398
397 drive-strength = <2>; 399 drive-strength = <2>;
398 bias-disable; 400 bias-disable;
399 }; 401 };
400 402
401 tp_int_default: tp-int-default-state { !! 403 tp_int_default: tp-int-default {
402 pins = "gpio13"; 404 pins = "gpio13";
403 function = "gpio"; 405 function = "gpio";
404 406
405 drive-strength = <2>; 407 drive-strength = <2>;
406 bias-disable; 408 bias-disable;
407 }; 409 };
408 }; 410 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.