1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
12 10
13 / { 11 / {
14 model = "Longcheer L8150"; 12 model = "Longcheer L8150";
15 compatible = "longcheer,l8150", "qcom, !! 13 compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
16 chassis-type = "handset"; 14 chassis-type = "handset";
17 15
18 aliases { 16 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ 17 mmc0 = &sdhc_1; /* eMMC */
20 mmc1 = &sdhc_2; /* SD card */ 18 mmc1 = &sdhc_2; /* SD card */
21 serial0 = &blsp_uart2; 19 serial0 = &blsp_uart2;
22 }; 20 };
23 21
24 chosen { 22 chosen {
25 stdout-path = "serial0"; 23 stdout-path = "serial0";
26 }; 24 };
27 25
28 /* <<
29 * For some reason, the signed wcnss f <<
30 * It must be loaded at 0x8b600000. Un <<
31 * mpss_mem does not fit when loaded t <<
32 * <<
33 * Load wcnss_mem to the fixed address <<
34 * working higher address. For some re <<
35 * boot when placed at 0x8a800000 to 0 <<
36 */ <<
37 reserved-memory { 26 reserved-memory {
38 /delete-node/ mpss@86800000; !! 27 /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
39 /delete-node/ wcnss; !! 28 /delete-node/ wcnss@89300000;
40 29
41 wcnss_mem: wcnss@8b600000 { 30 wcnss_mem: wcnss@8b600000 {
42 reg = <0x0 0x8b600000 31 reg = <0x0 0x8b600000 0x0 0x600000>;
43 no-map; 32 no-map;
44 }; 33 };
45 <<
46 mpss_mem: mpss@8e800000 { <<
47 reg = <0x0 0x8e800000 <<
48 no-map; <<
49 }; <<
50 }; <<
51 <<
52 battery: battery { <<
53 compatible = "simple-battery"; <<
54 voltage-min-design-microvolt = <<
55 voltage-max-design-microvolt = <<
56 energy-full-design-microwatt-h <<
57 charge-full-design-microamp-ho <<
58 <<
59 ocv-capacity-celsius = <25>; <<
60 ocv-capacity-table-0 = <433000 <<
61 <4208000 90>, <4153000 <<
62 <4001000 70>, <3962000 <<
63 <3839000 50>, <3817000 <<
64 <3767000 30>, <3747000 <<
65 <3688000 13>, <3681000 <<
66 <3677000 8>, <3674000 <<
67 <3597000 4>, <3537000 <<
68 <3000000 0>; <<
69 }; 34 };
70 35
71 gpio-keys { 36 gpio-keys {
72 compatible = "gpio-keys"; 37 compatible = "gpio-keys";
73 38
74 pinctrl-names = "default"; 39 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_keys_defaul 40 pinctrl-0 = <&gpio_keys_default>;
76 41
77 label = "GPIO Buttons"; 42 label = "GPIO Buttons";
78 43
79 button-volume-up { 44 button-volume-up {
80 label = "Volume Up"; 45 label = "Volume Up";
81 gpios = <&tlmm 107 GPI 46 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLU 47 linux,code = <KEY_VOLUMEUP>;
83 }; 48 };
84 }; 49 };
85 50
86 reg_ctp: regulator-ctp { 51 reg_ctp: regulator-ctp {
87 compatible = "regulator-fixed" 52 compatible = "regulator-fixed";
88 regulator-name = "ctp"; 53 regulator-name = "ctp";
89 54
90 regulator-min-microvolt = <280 55 regulator-min-microvolt = <2800000>;
91 regulator-max-microvolt = <280 56 regulator-max-microvolt = <2800000>;
92 57
93 gpio = <&tlmm 17 GPIO_ACTIVE_H 58 gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
94 enable-active-high; 59 enable-active-high;
95 60
96 pinctrl-names = "default"; 61 pinctrl-names = "default";
97 pinctrl-0 = <&ctp_pwr_en_defau 62 pinctrl-0 = <&ctp_pwr_en_default>;
98 }; 63 };
99 64
100 flash-led-controller { 65 flash-led-controller {
101 compatible = "sgmicro,sgm3140" 66 compatible = "sgmicro,sgm3140";
102 flash-gpios = <&tlmm 31 GPIO_A 67 flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 32 GPIO_ 68 enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
104 69
105 pinctrl-names = "default"; 70 pinctrl-names = "default";
106 pinctrl-0 = <&camera_flash_def 71 pinctrl-0 = <&camera_flash_default>;
107 72
108 flash_led: led { 73 flash_led: led {
109 function = LED_FUNCTIO 74 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 75 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 76 flash-max-timeout-us = <250000>;
112 }; 77 };
113 }; 78 };
114 }; 79 };
115 80
116 &blsp_i2c1 { 81 &blsp_i2c1 {
117 status = "okay"; 82 status = "okay";
118 83
119 led-controller@45 { 84 led-controller@45 {
120 compatible = "awinic,aw2013"; 85 compatible = "awinic,aw2013";
121 reg = <0x45>; 86 reg = <0x45>;
122 #address-cells = <1>; 87 #address-cells = <1>;
123 #size-cells = <0>; 88 #size-cells = <0>;
124 89
125 vcc-supply = <&pm8916_l17>; 90 vcc-supply = <&pm8916_l17>;
126 vio-supply = <&pm8916_l6>; <<
127 91
128 led@0 { 92 led@0 {
129 reg = <0>; 93 reg = <0>;
130 led-max-microamp = <50 94 led-max-microamp = <5000>;
131 function = LED_FUNCTIO 95 function = LED_FUNCTION_INDICATOR;
132 color = <LED_COLOR_ID_ 96 color = <LED_COLOR_ID_RED>;
133 }; 97 };
134 98
135 led@1 { 99 led@1 {
136 reg = <1>; 100 reg = <1>;
137 led-max-microamp = <50 101 led-max-microamp = <5000>;
138 function = LED_FUNCTIO 102 function = LED_FUNCTION_INDICATOR;
139 color = <LED_COLOR_ID_ 103 color = <LED_COLOR_ID_GREEN>;
140 }; 104 };
141 105
142 led@2 { 106 led@2 {
143 reg = <2>; 107 reg = <2>;
144 led-max-microamp = <50 108 led-max-microamp = <5000>;
145 function = LED_FUNCTIO 109 function = LED_FUNCTION_INDICATOR;
146 color = <LED_COLOR_ID_ 110 color = <LED_COLOR_ID_BLUE>;
147 }; 111 };
148 }; 112 };
149 }; 113 };
150 114
151 &blsp_i2c2 { 115 &blsp_i2c2 {
152 status = "okay"; 116 status = "okay";
153 117
154 accelerometer@10 { 118 accelerometer@10 {
155 compatible = "bosch,bmc156_acc 119 compatible = "bosch,bmc156_accel";
156 reg = <0x10>; 120 reg = <0x10>;
157 121
158 /* 122 /*
159 * For some reason the interru 123 * For some reason the interrupt line is usually not connected
160 * to the BMC156. However, the 124 * to the BMC156. However, there are two pads next to the chip
161 * that can be shorted to make 125 * that can be shorted to make it work if needed.
162 * 126 *
163 * interrupt-parent = <&tlmm>; 127 * interrupt-parent = <&tlmm>;
164 * interrupts = <116 IRQ_TYPE_ 128 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
165 */ 129 */
166 130
167 pinctrl-names = "default"; 131 pinctrl-names = "default";
168 pinctrl-0 = <&accel_int_defaul 132 pinctrl-0 = <&accel_int_default>;
169 133
170 vdd-supply = <&pm8916_l17>; 134 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 135 vddio-supply = <&pm8916_l6>;
172 136
173 mount-matrix = "0", "1", "0", 137 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 138 "-1", "0", "0",
175 "0", "0", "1"; 139 "0", "0", "1";
176 }; 140 };
177 141
178 magnetometer@12 { 142 magnetometer@12 {
179 compatible = "bosch,bmc156_mag 143 compatible = "bosch,bmc156_magn";
180 reg = <0x12>; 144 reg = <0x12>;
181 145
182 interrupt-parent = <&tlmm>; 146 interrupt-parent = <&tlmm>;
183 interrupts = <113 IRQ_TYPE_EDG 147 interrupts = <113 IRQ_TYPE_EDGE_RISING>;
184 148
185 pinctrl-names = "default"; 149 pinctrl-names = "default";
186 pinctrl-0 = <&magn_int_default 150 pinctrl-0 = <&magn_int_default>;
187 151
188 vdd-supply = <&pm8916_l17>; 152 vdd-supply = <&pm8916_l17>;
189 vddio-supply = <&pm8916_l6>; 153 vddio-supply = <&pm8916_l6>;
190 }; 154 };
191 155
192 light-sensor@23 { 156 light-sensor@23 {
193 compatible = "liteon,ltr559"; 157 compatible = "liteon,ltr559";
194 reg = <0x23>; 158 reg = <0x23>;
195 proximity-near-level = <75>; 159 proximity-near-level = <75>;
196 160
197 interrupt-parent = <&tlmm>; 161 interrupt-parent = <&tlmm>;
198 interrupts = <115 IRQ_TYPE_EDG 162 interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
199 163
200 pinctrl-names = "default"; 164 pinctrl-names = "default";
201 pinctrl-0 = <&light_int_defaul 165 pinctrl-0 = <&light_int_default>;
202 166
203 vdd-supply = <&pm8916_l17>; 167 vdd-supply = <&pm8916_l17>;
204 vddio-supply = <&pm8916_l6>; 168 vddio-supply = <&pm8916_l6>;
205 }; 169 };
206 170
207 gyroscope@68 { 171 gyroscope@68 {
208 compatible = "bosch,bmg160"; 172 compatible = "bosch,bmg160";
209 reg = <0x68>; 173 reg = <0x68>;
210 174
211 interrupt-parent = <&tlmm>; 175 interrupt-parent = <&tlmm>;
212 interrupts = <23 IRQ_TYPE_EDGE 176 interrupts = <23 IRQ_TYPE_EDGE_RISING>,
213 <22 IRQ_TYPE_EDGE 177 <22 IRQ_TYPE_EDGE_RISING>;
214 178
215 pinctrl-names = "default"; 179 pinctrl-names = "default";
216 pinctrl-0 = <&gyro_int_default 180 pinctrl-0 = <&gyro_int_default>;
217 181
218 vdd-supply = <&pm8916_l17>; 182 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 183 vddio-supply = <&pm8916_l6>;
220 }; 184 };
221 }; 185 };
222 186
223 &blsp_i2c5 { 187 &blsp_i2c5 {
224 status = "okay"; 188 status = "okay";
225 189
226 rmi4@20 { 190 rmi4@20 {
227 compatible = "syna,rmi4-i2c"; 191 compatible = "syna,rmi4-i2c";
228 reg = <0x20>; 192 reg = <0x20>;
229 #address-cells = <1>; 193 #address-cells = <1>;
230 #size-cells = <0>; 194 #size-cells = <0>;
231 195
232 interrupt-parent = <&tlmm>; 196 interrupt-parent = <&tlmm>;
233 interrupts = <13 IRQ_TYPE_EDGE 197 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
234 198
235 vdd-supply = <®_ctp>; 199 vdd-supply = <®_ctp>;
236 vio-supply = <&pm8916_l6>; 200 vio-supply = <&pm8916_l6>;
237 201
238 pinctrl-names = "default"; 202 pinctrl-names = "default";
239 pinctrl-0 = <&tp_int_default>; 203 pinctrl-0 = <&tp_int_default>;
240 204
241 syna,startup-delay-ms = <10>; 205 syna,startup-delay-ms = <10>;
242 206
243 rmi4-f01@1 { 207 rmi4-f01@1 {
244 reg = <0x1>; 208 reg = <0x1>;
245 syna,nosleep-mode = <1 209 syna,nosleep-mode = <1>; /* Allow sleeping */
246 }; 210 };
247 211
248 rmi4-f12@12 { 212 rmi4-f12@12 {
249 reg = <0x12>; 213 reg = <0x12>;
250 syna,sensor-type = <1> 214 syna,sensor-type = <1>; /* Touchscreen */
251 }; 215 };
252 }; 216 };
253 }; 217 };
254 218
255 &blsp_uart2 { 219 &blsp_uart2 {
256 status = "okay"; 220 status = "okay";
257 }; 221 };
258 222
259 &pm8916_bms { <<
260 status = "okay"; <<
261 <<
262 monitored-battery = <&battery>; <<
263 power-supplies = <&pm8916_charger>; <<
264 }; <<
265 <<
266 &pm8916_charger { <<
267 status = "okay"; <<
268 <<
269 monitored-battery = <&battery>; <<
270 <<
271 qcom,fast-charge-safe-current = <90000 <<
272 qcom,fast-charge-safe-voltage = <43000 <<
273 }; <<
274 <<
275 &pm8916_codec { <<
276 qcom,micbias-lvl = <2800>; <<
277 qcom,mbhc-vthreshold-low = <75 150 237 <<
278 qcom,mbhc-vthreshold-high = <75 150 23 <<
279 qcom,hphl-jack-type-normally-open; <<
280 }; <<
281 <<
282 &pm8916_resin { 223 &pm8916_resin {
283 status = "okay"; 224 status = "okay";
284 linux,code = <KEY_VOLUMEDOWN>; 225 linux,code = <KEY_VOLUMEDOWN>;
285 }; 226 };
286 227
287 &pm8916_rpm_regulators { 228 &pm8916_rpm_regulators {
288 pm8916_l17: l17 { 229 pm8916_l17: l17 {
289 regulator-min-microvolt = <285 230 regulator-min-microvolt = <2850000>;
290 regulator-max-microvolt = <285 231 regulator-max-microvolt = <2850000>;
291 }; 232 };
292 }; 233 };
293 234
>> 235 &pm8916_usbin {
>> 236 status = "okay";
>> 237 };
>> 238
294 &pm8916_vib { 239 &pm8916_vib {
295 status = "okay"; 240 status = "okay";
296 }; 241 };
297 242
298 &sdhc_1 { 243 &sdhc_1 {
299 status = "okay"; 244 status = "okay";
300 }; 245 };
301 246
302 &sdhc_2 { 247 &sdhc_2 {
303 status = "okay"; 248 status = "okay";
304 non-removable; 249 non-removable;
305 }; 250 };
306 251
307 &sound { <<
308 audio-routing = <<
309 "AMIC1", "MIC BIAS Internal1", <<
310 "AMIC2", "MIC BIAS Internal2", <<
311 "AMIC3", "MIC BIAS Internal3"; <<
312 }; <<
313 <<
314 &usb { 252 &usb {
315 status = "okay"; 253 status = "okay";
316 dr_mode = "peripheral"; 254 dr_mode = "peripheral";
317 extcon = <&pm8916_charger>; !! 255 extcon = <&pm8916_usbin>;
318 }; 256 };
319 257
320 &usb_hs_phy { 258 &usb_hs_phy {
321 extcon = <&pm8916_charger>; !! 259 extcon = <&pm8916_usbin>;
322 }; <<
323 <<
324 &venus { <<
325 status = "okay"; <<
326 }; <<
327 <<
328 &venus_mem { <<
329 status = "okay"; <<
330 }; 260 };
331 261
332 &wcnss { 262 &wcnss {
333 status = "okay"; 263 status = "okay";
334 }; 264 };
335 265
336 &wcnss_iris { 266 &wcnss_iris {
337 compatible = "qcom,wcn3620"; 267 compatible = "qcom,wcn3620";
338 }; <<
339 <<
340 &wcnss_mem { <<
341 status = "okay"; <<
342 }; 268 };
343 269
344 &tlmm { 270 &tlmm {
345 accel_int_default: accel-int-default-s 271 accel_int_default: accel-int-default-state {
346 pins = "gpio116"; 272 pins = "gpio116";
347 function = "gpio"; 273 function = "gpio";
348 274
349 drive-strength = <2>; 275 drive-strength = <2>;
350 bias-disable; 276 bias-disable;
351 }; 277 };
352 278
353 camera_flash_default: camera-flash-def 279 camera_flash_default: camera-flash-default-state {
354 pins = "gpio31", "gpio32"; 280 pins = "gpio31", "gpio32";
355 function = "gpio"; 281 function = "gpio";
356 282
357 drive-strength = <2>; 283 drive-strength = <2>;
358 bias-disable; 284 bias-disable;
359 }; 285 };
360 286
361 ctp_pwr_en_default: ctp-pwr-en-default 287 ctp_pwr_en_default: ctp-pwr-en-default-state {
362 pins = "gpio17"; 288 pins = "gpio17";
363 function = "gpio"; 289 function = "gpio";
364 290
365 drive-strength = <2>; 291 drive-strength = <2>;
366 bias-disable; 292 bias-disable;
367 }; 293 };
368 294
369 gpio_keys_default: gpio-keys-default-s 295 gpio_keys_default: gpio-keys-default-state {
370 pins = "gpio107"; 296 pins = "gpio107";
371 function = "gpio"; 297 function = "gpio";
372 298
373 drive-strength = <2>; 299 drive-strength = <2>;
374 bias-pull-up; 300 bias-pull-up;
375 }; 301 };
376 302
377 gyro_int_default: gyro-int-default-sta 303 gyro_int_default: gyro-int-default-state {
378 pins = "gpio22", "gpio23"; 304 pins = "gpio22", "gpio23";
379 function = "gpio"; 305 function = "gpio";
380 306
381 drive-strength = <2>; 307 drive-strength = <2>;
382 bias-disable; 308 bias-disable;
383 }; 309 };
384 310
385 light_int_default: light-int-default-s 311 light_int_default: light-int-default-state {
386 pins = "gpio115"; 312 pins = "gpio115";
387 function = "gpio"; 313 function = "gpio";
388 314
389 drive-strength = <2>; 315 drive-strength = <2>;
390 bias-disable; 316 bias-disable;
391 }; 317 };
392 318
393 magn_int_default: magn-int-default-sta 319 magn_int_default: magn-int-default-state {
394 pins = "gpio113"; 320 pins = "gpio113";
395 function = "gpio"; 321 function = "gpio";
396 322
397 drive-strength = <2>; 323 drive-strength = <2>;
398 bias-disable; 324 bias-disable;
399 }; 325 };
400 326
401 tp_int_default: tp-int-default-state { 327 tp_int_default: tp-int-default-state {
402 pins = "gpio13"; 328 pins = "gpio13";
403 function = "gpio"; 329 function = "gpio";
404 330
405 drive-strength = <2>; 331 drive-strength = <2>;
406 bias-disable; 332 bias-disable;
407 }; 333 };
408 }; 334 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.