1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/leds/common.h>
12 10
13 / { 11 / {
14 model = "Longcheer L8150"; 12 model = "Longcheer L8150";
15 compatible = "longcheer,l8150", "qcom, !! 13 compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
16 chassis-type = "handset"; 14 chassis-type = "handset";
17 15
18 aliases { 16 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ 17 mmc0 = &sdhc_1; /* eMMC */
20 mmc1 = &sdhc_2; /* SD card */ 18 mmc1 = &sdhc_2; /* SD card */
21 serial0 = &blsp_uart2; 19 serial0 = &blsp_uart2;
22 }; 20 };
23 21
24 chosen { 22 chosen {
25 stdout-path = "serial0"; 23 stdout-path = "serial0";
26 }; 24 };
27 25
28 /* <<
29 * For some reason, the signed wcnss f <<
30 * It must be loaded at 0x8b600000. Un <<
31 * mpss_mem does not fit when loaded t <<
32 * <<
33 * Load wcnss_mem to the fixed address <<
34 * working higher address. For some re <<
35 * boot when placed at 0x8a800000 to 0 <<
36 */ <<
37 reserved-memory { 26 reserved-memory {
38 /delete-node/ mpss@86800000; !! 27 /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
39 /delete-node/ wcnss; !! 28 /delete-node/ wcnss@89300000;
40 29
41 wcnss_mem: wcnss@8b600000 { 30 wcnss_mem: wcnss@8b600000 {
42 reg = <0x0 0x8b600000 31 reg = <0x0 0x8b600000 0x0 0x600000>;
43 no-map; 32 no-map;
44 }; 33 };
45 <<
46 mpss_mem: mpss@8e800000 { <<
47 reg = <0x0 0x8e800000 <<
48 no-map; <<
49 }; <<
50 }; <<
51 <<
52 battery: battery { <<
53 compatible = "simple-battery"; <<
54 voltage-min-design-microvolt = <<
55 voltage-max-design-microvolt = <<
56 energy-full-design-microwatt-h <<
57 charge-full-design-microamp-ho <<
58 <<
59 ocv-capacity-celsius = <25>; <<
60 ocv-capacity-table-0 = <433000 <<
61 <4208000 90>, <4153000 <<
62 <4001000 70>, <3962000 <<
63 <3839000 50>, <3817000 <<
64 <3767000 30>, <3747000 <<
65 <3688000 13>, <3681000 <<
66 <3677000 8>, <3674000 <<
67 <3597000 4>, <3537000 <<
68 <3000000 0>; <<
69 }; 34 };
70 35
71 gpio-keys { 36 gpio-keys {
72 compatible = "gpio-keys"; 37 compatible = "gpio-keys";
73 38
74 pinctrl-names = "default"; 39 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_keys_defaul 40 pinctrl-0 = <&gpio_keys_default>;
76 41
77 label = "GPIO Buttons"; 42 label = "GPIO Buttons";
78 43
79 button-volume-up { 44 button-volume-up {
80 label = "Volume Up"; 45 label = "Volume Up";
81 gpios = <&tlmm 107 GPI 46 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLU 47 linux,code = <KEY_VOLUMEUP>;
83 }; 48 };
84 }; 49 };
85 50
86 reg_ctp: regulator-ctp { 51 reg_ctp: regulator-ctp {
87 compatible = "regulator-fixed" 52 compatible = "regulator-fixed";
88 regulator-name = "ctp"; 53 regulator-name = "ctp";
89 54
90 regulator-min-microvolt = <280 55 regulator-min-microvolt = <2800000>;
91 regulator-max-microvolt = <280 56 regulator-max-microvolt = <2800000>;
92 57
93 gpio = <&tlmm 17 GPIO_ACTIVE_H 58 gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
94 enable-active-high; 59 enable-active-high;
95 60
96 pinctrl-names = "default"; 61 pinctrl-names = "default";
97 pinctrl-0 = <&ctp_pwr_en_defau 62 pinctrl-0 = <&ctp_pwr_en_default>;
98 }; 63 };
99 64
100 flash-led-controller { 65 flash-led-controller {
101 compatible = "sgmicro,sgm3140" 66 compatible = "sgmicro,sgm3140";
102 flash-gpios = <&tlmm 31 GPIO_A 67 flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 32 GPIO_ 68 enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
104 69
105 pinctrl-names = "default"; 70 pinctrl-names = "default";
106 pinctrl-0 = <&camera_flash_def 71 pinctrl-0 = <&camera_flash_default>;
107 72
108 flash_led: led { 73 flash_led: led {
109 function = LED_FUNCTIO 74 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 75 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 76 flash-max-timeout-us = <250000>;
112 }; 77 };
113 }; 78 };
114 }; 79 };
115 80
116 &blsp_i2c1 { 81 &blsp_i2c1 {
117 status = "okay"; 82 status = "okay";
118 83
119 led-controller@45 { 84 led-controller@45 {
120 compatible = "awinic,aw2013"; 85 compatible = "awinic,aw2013";
121 reg = <0x45>; 86 reg = <0x45>;
122 #address-cells = <1>; 87 #address-cells = <1>;
123 #size-cells = <0>; 88 #size-cells = <0>;
124 89
125 vcc-supply = <&pm8916_l17>; 90 vcc-supply = <&pm8916_l17>;
126 vio-supply = <&pm8916_l6>; 91 vio-supply = <&pm8916_l6>;
127 92
128 led@0 { 93 led@0 {
129 reg = <0>; 94 reg = <0>;
130 led-max-microamp = <50 95 led-max-microamp = <5000>;
131 function = LED_FUNCTIO 96 function = LED_FUNCTION_INDICATOR;
132 color = <LED_COLOR_ID_ 97 color = <LED_COLOR_ID_RED>;
133 }; 98 };
134 99
135 led@1 { 100 led@1 {
136 reg = <1>; 101 reg = <1>;
137 led-max-microamp = <50 102 led-max-microamp = <5000>;
138 function = LED_FUNCTIO 103 function = LED_FUNCTION_INDICATOR;
139 color = <LED_COLOR_ID_ 104 color = <LED_COLOR_ID_GREEN>;
140 }; 105 };
141 106
142 led@2 { 107 led@2 {
143 reg = <2>; 108 reg = <2>;
144 led-max-microamp = <50 109 led-max-microamp = <5000>;
145 function = LED_FUNCTIO 110 function = LED_FUNCTION_INDICATOR;
146 color = <LED_COLOR_ID_ 111 color = <LED_COLOR_ID_BLUE>;
147 }; 112 };
148 }; 113 };
149 }; 114 };
150 115
151 &blsp_i2c2 { 116 &blsp_i2c2 {
152 status = "okay"; 117 status = "okay";
153 118
154 accelerometer@10 { 119 accelerometer@10 {
155 compatible = "bosch,bmc156_acc 120 compatible = "bosch,bmc156_accel";
156 reg = <0x10>; 121 reg = <0x10>;
157 122
158 /* 123 /*
159 * For some reason the interru 124 * For some reason the interrupt line is usually not connected
160 * to the BMC156. However, the 125 * to the BMC156. However, there are two pads next to the chip
161 * that can be shorted to make 126 * that can be shorted to make it work if needed.
162 * 127 *
163 * interrupt-parent = <&tlmm>; 128 * interrupt-parent = <&tlmm>;
164 * interrupts = <116 IRQ_TYPE_ 129 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
165 */ 130 */
166 131
167 pinctrl-names = "default"; 132 pinctrl-names = "default";
168 pinctrl-0 = <&accel_int_defaul 133 pinctrl-0 = <&accel_int_default>;
169 134
170 vdd-supply = <&pm8916_l17>; 135 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 136 vddio-supply = <&pm8916_l6>;
172 137
173 mount-matrix = "0", "1", "0", 138 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 139 "-1", "0", "0",
175 "0", "0", "1"; 140 "0", "0", "1";
176 }; 141 };
177 142
178 magnetometer@12 { 143 magnetometer@12 {
179 compatible = "bosch,bmc156_mag 144 compatible = "bosch,bmc156_magn";
180 reg = <0x12>; 145 reg = <0x12>;
181 146
182 interrupt-parent = <&tlmm>; 147 interrupt-parent = <&tlmm>;
183 interrupts = <113 IRQ_TYPE_EDG 148 interrupts = <113 IRQ_TYPE_EDGE_RISING>;
184 149
185 pinctrl-names = "default"; 150 pinctrl-names = "default";
186 pinctrl-0 = <&magn_int_default 151 pinctrl-0 = <&magn_int_default>;
187 152
188 vdd-supply = <&pm8916_l17>; 153 vdd-supply = <&pm8916_l17>;
189 vddio-supply = <&pm8916_l6>; 154 vddio-supply = <&pm8916_l6>;
190 }; 155 };
191 156
192 light-sensor@23 { 157 light-sensor@23 {
193 compatible = "liteon,ltr559"; 158 compatible = "liteon,ltr559";
194 reg = <0x23>; 159 reg = <0x23>;
195 proximity-near-level = <75>; 160 proximity-near-level = <75>;
196 161
197 interrupt-parent = <&tlmm>; 162 interrupt-parent = <&tlmm>;
198 interrupts = <115 IRQ_TYPE_EDG 163 interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
199 164
200 pinctrl-names = "default"; 165 pinctrl-names = "default";
201 pinctrl-0 = <&light_int_defaul 166 pinctrl-0 = <&light_int_default>;
202 167
203 vdd-supply = <&pm8916_l17>; 168 vdd-supply = <&pm8916_l17>;
204 vddio-supply = <&pm8916_l6>; 169 vddio-supply = <&pm8916_l6>;
205 }; 170 };
206 171
207 gyroscope@68 { 172 gyroscope@68 {
208 compatible = "bosch,bmg160"; 173 compatible = "bosch,bmg160";
209 reg = <0x68>; 174 reg = <0x68>;
210 175
211 interrupt-parent = <&tlmm>; 176 interrupt-parent = <&tlmm>;
212 interrupts = <23 IRQ_TYPE_EDGE 177 interrupts = <23 IRQ_TYPE_EDGE_RISING>,
213 <22 IRQ_TYPE_EDGE 178 <22 IRQ_TYPE_EDGE_RISING>;
214 179
215 pinctrl-names = "default"; 180 pinctrl-names = "default";
216 pinctrl-0 = <&gyro_int_default 181 pinctrl-0 = <&gyro_int_default>;
217 182
218 vdd-supply = <&pm8916_l17>; 183 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 184 vddio-supply = <&pm8916_l6>;
220 }; 185 };
221 }; 186 };
222 187
223 &blsp_i2c5 { 188 &blsp_i2c5 {
224 status = "okay"; 189 status = "okay";
225 190
226 rmi4@20 { 191 rmi4@20 {
227 compatible = "syna,rmi4-i2c"; 192 compatible = "syna,rmi4-i2c";
228 reg = <0x20>; 193 reg = <0x20>;
229 #address-cells = <1>; 194 #address-cells = <1>;
230 #size-cells = <0>; 195 #size-cells = <0>;
231 196
232 interrupt-parent = <&tlmm>; 197 interrupt-parent = <&tlmm>;
233 interrupts = <13 IRQ_TYPE_EDGE 198 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
234 199
235 vdd-supply = <®_ctp>; 200 vdd-supply = <®_ctp>;
236 vio-supply = <&pm8916_l6>; 201 vio-supply = <&pm8916_l6>;
237 202
238 pinctrl-names = "default"; 203 pinctrl-names = "default";
239 pinctrl-0 = <&tp_int_default>; 204 pinctrl-0 = <&tp_int_default>;
240 205
241 syna,startup-delay-ms = <10>; 206 syna,startup-delay-ms = <10>;
242 207
243 rmi4-f01@1 { 208 rmi4-f01@1 {
244 reg = <0x1>; 209 reg = <0x1>;
245 syna,nosleep-mode = <1 210 syna,nosleep-mode = <1>; /* Allow sleeping */
246 }; 211 };
247 212
248 rmi4-f12@12 { 213 rmi4-f12@12 {
249 reg = <0x12>; 214 reg = <0x12>;
250 syna,sensor-type = <1> 215 syna,sensor-type = <1>; /* Touchscreen */
251 }; 216 };
252 }; 217 };
253 }; 218 };
254 219
255 &blsp_uart2 { 220 &blsp_uart2 {
256 status = "okay"; 221 status = "okay";
257 }; 222 };
258 223
259 &pm8916_bms { <<
260 status = "okay"; <<
261 <<
262 monitored-battery = <&battery>; <<
263 power-supplies = <&pm8916_charger>; <<
264 }; <<
265 <<
266 &pm8916_charger { <<
267 status = "okay"; <<
268 <<
269 monitored-battery = <&battery>; <<
270 <<
271 qcom,fast-charge-safe-current = <90000 <<
272 qcom,fast-charge-safe-voltage = <43000 <<
273 }; <<
274 <<
275 &pm8916_codec { <<
276 qcom,micbias-lvl = <2800>; <<
277 qcom,mbhc-vthreshold-low = <75 150 237 <<
278 qcom,mbhc-vthreshold-high = <75 150 23 <<
279 qcom,hphl-jack-type-normally-open; <<
280 }; <<
281 <<
282 &pm8916_resin { 224 &pm8916_resin {
283 status = "okay"; 225 status = "okay";
284 linux,code = <KEY_VOLUMEDOWN>; 226 linux,code = <KEY_VOLUMEDOWN>;
285 }; 227 };
286 228
287 &pm8916_rpm_regulators { 229 &pm8916_rpm_regulators {
288 pm8916_l17: l17 { 230 pm8916_l17: l17 {
289 regulator-min-microvolt = <285 231 regulator-min-microvolt = <2850000>;
290 regulator-max-microvolt = <285 232 regulator-max-microvolt = <2850000>;
291 }; 233 };
292 }; 234 };
293 235
>> 236 &pm8916_usbin {
>> 237 status = "okay";
>> 238 };
>> 239
294 &pm8916_vib { 240 &pm8916_vib {
295 status = "okay"; 241 status = "okay";
296 }; 242 };
297 243
298 &sdhc_1 { 244 &sdhc_1 {
299 status = "okay"; 245 status = "okay";
300 }; 246 };
301 247
302 &sdhc_2 { 248 &sdhc_2 {
303 status = "okay"; 249 status = "okay";
304 non-removable; 250 non-removable;
305 }; 251 };
306 252
307 &sound { <<
308 audio-routing = <<
309 "AMIC1", "MIC BIAS Internal1", <<
310 "AMIC2", "MIC BIAS Internal2", <<
311 "AMIC3", "MIC BIAS Internal3"; <<
312 }; <<
313 <<
314 &usb { 253 &usb {
315 status = "okay"; 254 status = "okay";
316 dr_mode = "peripheral"; 255 dr_mode = "peripheral";
317 extcon = <&pm8916_charger>; !! 256 extcon = <&pm8916_usbin>;
318 }; 257 };
319 258
320 &usb_hs_phy { 259 &usb_hs_phy {
321 extcon = <&pm8916_charger>; !! 260 extcon = <&pm8916_usbin>;
322 }; <<
323 <<
324 &venus { <<
325 status = "okay"; <<
326 }; <<
327 <<
328 &venus_mem { <<
329 status = "okay"; <<
330 }; 261 };
331 262
332 &wcnss { 263 &wcnss {
333 status = "okay"; 264 status = "okay";
334 }; 265 };
335 266
336 &wcnss_iris { 267 &wcnss_iris {
337 compatible = "qcom,wcn3620"; 268 compatible = "qcom,wcn3620";
338 }; <<
339 <<
340 &wcnss_mem { <<
341 status = "okay"; <<
342 }; 269 };
343 270
344 &tlmm { 271 &tlmm {
345 accel_int_default: accel-int-default-s 272 accel_int_default: accel-int-default-state {
346 pins = "gpio116"; 273 pins = "gpio116";
347 function = "gpio"; 274 function = "gpio";
348 275
349 drive-strength = <2>; 276 drive-strength = <2>;
350 bias-disable; 277 bias-disable;
351 }; 278 };
352 279
353 camera_flash_default: camera-flash-def 280 camera_flash_default: camera-flash-default-state {
354 pins = "gpio31", "gpio32"; 281 pins = "gpio31", "gpio32";
355 function = "gpio"; 282 function = "gpio";
356 283
357 drive-strength = <2>; 284 drive-strength = <2>;
358 bias-disable; 285 bias-disable;
359 }; 286 };
360 287
361 ctp_pwr_en_default: ctp-pwr-en-default 288 ctp_pwr_en_default: ctp-pwr-en-default-state {
362 pins = "gpio17"; 289 pins = "gpio17";
363 function = "gpio"; 290 function = "gpio";
364 291
365 drive-strength = <2>; 292 drive-strength = <2>;
366 bias-disable; 293 bias-disable;
367 }; 294 };
368 295
369 gpio_keys_default: gpio-keys-default-s 296 gpio_keys_default: gpio-keys-default-state {
370 pins = "gpio107"; 297 pins = "gpio107";
371 function = "gpio"; 298 function = "gpio";
372 299
373 drive-strength = <2>; 300 drive-strength = <2>;
374 bias-pull-up; 301 bias-pull-up;
375 }; 302 };
376 303
377 gyro_int_default: gyro-int-default-sta 304 gyro_int_default: gyro-int-default-state {
378 pins = "gpio22", "gpio23"; 305 pins = "gpio22", "gpio23";
379 function = "gpio"; 306 function = "gpio";
380 307
381 drive-strength = <2>; 308 drive-strength = <2>;
382 bias-disable; 309 bias-disable;
383 }; 310 };
384 311
385 light_int_default: light-int-default-s 312 light_int_default: light-int-default-state {
386 pins = "gpio115"; 313 pins = "gpio115";
387 function = "gpio"; 314 function = "gpio";
388 315
389 drive-strength = <2>; 316 drive-strength = <2>;
390 bias-disable; 317 bias-disable;
391 }; 318 };
392 319
393 magn_int_default: magn-int-default-sta 320 magn_int_default: magn-int-default-state {
394 pins = "gpio113"; 321 pins = "gpio113";
395 function = "gpio"; 322 function = "gpio";
396 323
397 drive-strength = <2>; 324 drive-strength = <2>;
398 bias-disable; 325 bias-disable;
399 }; 326 };
400 327
401 tp_int_default: tp-int-default-state { 328 tp_int_default: tp-int-default-state {
402 pins = "gpio13"; 329 pins = "gpio13";
403 function = "gpio"; 330 function = "gpio";
404 331
405 drive-strength = <2>; 332 drive-strength = <2>;
406 bias-disable; 333 bias-disable;
407 }; 334 };
408 }; 335 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.