1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" 6 #include "msm8916-modem-qdsp6.dtsi"
7 7
8 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq 10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/leds/common.h> 11 #include <dt-bindings/leds/common.h>
12 12
13 / { 13 / {
14 model = "Longcheer L8150"; 14 model = "Longcheer L8150";
15 compatible = "longcheer,l8150", "qcom, !! 15 compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
16 chassis-type = "handset"; 16 chassis-type = "handset";
17 17
18 aliases { 18 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ 19 mmc0 = &sdhc_1; /* eMMC */
20 mmc1 = &sdhc_2; /* SD card */ 20 mmc1 = &sdhc_2; /* SD card */
21 serial0 = &blsp_uart2; 21 serial0 = &blsp_uart2;
22 }; 22 };
23 23
24 chosen { 24 chosen {
25 stdout-path = "serial0"; 25 stdout-path = "serial0";
26 }; 26 };
27 27
28 /* 28 /*
29 * For some reason, the signed wcnss f 29 * For some reason, the signed wcnss firmware is not relocatable.
30 * It must be loaded at 0x8b600000. Un 30 * It must be loaded at 0x8b600000. Unfortunately, this also means that
31 * mpss_mem does not fit when loaded t 31 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
32 * 32 *
33 * Load wcnss_mem to the fixed address 33 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
34 * working higher address. For some re 34 * working higher address. For some reason the modem firmware does not
35 * boot when placed at 0x8a800000 to 0 35 * boot when placed at 0x8a800000 to 0x8e800000.
36 */ 36 */
37 reserved-memory { 37 reserved-memory {
38 /delete-node/ mpss@86800000; 38 /delete-node/ mpss@86800000;
39 /delete-node/ wcnss; 39 /delete-node/ wcnss;
40 40
41 wcnss_mem: wcnss@8b600000 { 41 wcnss_mem: wcnss@8b600000 {
42 reg = <0x0 0x8b600000 42 reg = <0x0 0x8b600000 0x0 0x600000>;
43 no-map; 43 no-map;
44 }; 44 };
45 45
46 mpss_mem: mpss@8e800000 { 46 mpss_mem: mpss@8e800000 {
47 reg = <0x0 0x8e800000 47 reg = <0x0 0x8e800000 0x0 0x5000000>;
48 no-map; 48 no-map;
49 }; 49 };
50 }; 50 };
51 51
52 battery: battery { 52 battery: battery {
53 compatible = "simple-battery"; 53 compatible = "simple-battery";
54 voltage-min-design-microvolt = 54 voltage-min-design-microvolt = <3400000>;
55 voltage-max-design-microvolt = 55 voltage-max-design-microvolt = <4350000>;
56 energy-full-design-microwatt-h 56 energy-full-design-microwatt-hours = <9500000>;
57 charge-full-design-microamp-ho 57 charge-full-design-microamp-hours = <2500000>;
58 58
59 ocv-capacity-celsius = <25>; 59 ocv-capacity-celsius = <25>;
60 ocv-capacity-table-0 = <433000 60 ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
61 <4208000 90>, <4153000 61 <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
62 <4001000 70>, <3962000 62 <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
63 <3839000 50>, <3817000 63 <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
64 <3767000 30>, <3747000 64 <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
65 <3688000 13>, <3681000 65 <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
66 <3677000 8>, <3674000 66 <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
67 <3597000 4>, <3537000 67 <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
68 <3000000 0>; 68 <3000000 0>;
69 }; 69 };
70 70
71 gpio-keys { 71 gpio-keys {
72 compatible = "gpio-keys"; 72 compatible = "gpio-keys";
73 73
74 pinctrl-names = "default"; 74 pinctrl-names = "default";
75 pinctrl-0 = <&gpio_keys_defaul 75 pinctrl-0 = <&gpio_keys_default>;
76 76
77 label = "GPIO Buttons"; 77 label = "GPIO Buttons";
78 78
79 button-volume-up { 79 button-volume-up {
80 label = "Volume Up"; 80 label = "Volume Up";
81 gpios = <&tlmm 107 GPI 81 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLU 82 linux,code = <KEY_VOLUMEUP>;
83 }; 83 };
84 }; 84 };
85 85
86 reg_ctp: regulator-ctp { 86 reg_ctp: regulator-ctp {
87 compatible = "regulator-fixed" 87 compatible = "regulator-fixed";
88 regulator-name = "ctp"; 88 regulator-name = "ctp";
89 89
90 regulator-min-microvolt = <280 90 regulator-min-microvolt = <2800000>;
91 regulator-max-microvolt = <280 91 regulator-max-microvolt = <2800000>;
92 92
93 gpio = <&tlmm 17 GPIO_ACTIVE_H 93 gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
94 enable-active-high; 94 enable-active-high;
95 95
96 pinctrl-names = "default"; 96 pinctrl-names = "default";
97 pinctrl-0 = <&ctp_pwr_en_defau 97 pinctrl-0 = <&ctp_pwr_en_default>;
98 }; 98 };
99 99
100 flash-led-controller { 100 flash-led-controller {
101 compatible = "sgmicro,sgm3140" 101 compatible = "sgmicro,sgm3140";
102 flash-gpios = <&tlmm 31 GPIO_A 102 flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
103 enable-gpios = <&tlmm 32 GPIO_ 103 enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
104 104
105 pinctrl-names = "default"; 105 pinctrl-names = "default";
106 pinctrl-0 = <&camera_flash_def 106 pinctrl-0 = <&camera_flash_default>;
107 107
108 flash_led: led { 108 flash_led: led {
109 function = LED_FUNCTIO 109 function = LED_FUNCTION_FLASH;
110 color = <LED_COLOR_ID_ 110 color = <LED_COLOR_ID_WHITE>;
111 flash-max-timeout-us = 111 flash-max-timeout-us = <250000>;
112 }; 112 };
113 }; 113 };
114 }; 114 };
115 115
116 &blsp_i2c1 { 116 &blsp_i2c1 {
117 status = "okay"; 117 status = "okay";
118 118
119 led-controller@45 { 119 led-controller@45 {
120 compatible = "awinic,aw2013"; 120 compatible = "awinic,aw2013";
121 reg = <0x45>; 121 reg = <0x45>;
122 #address-cells = <1>; 122 #address-cells = <1>;
123 #size-cells = <0>; 123 #size-cells = <0>;
124 124
125 vcc-supply = <&pm8916_l17>; 125 vcc-supply = <&pm8916_l17>;
126 vio-supply = <&pm8916_l6>; 126 vio-supply = <&pm8916_l6>;
127 127
128 led@0 { 128 led@0 {
129 reg = <0>; 129 reg = <0>;
130 led-max-microamp = <50 130 led-max-microamp = <5000>;
131 function = LED_FUNCTIO 131 function = LED_FUNCTION_INDICATOR;
132 color = <LED_COLOR_ID_ 132 color = <LED_COLOR_ID_RED>;
133 }; 133 };
134 134
135 led@1 { 135 led@1 {
136 reg = <1>; 136 reg = <1>;
137 led-max-microamp = <50 137 led-max-microamp = <5000>;
138 function = LED_FUNCTIO 138 function = LED_FUNCTION_INDICATOR;
139 color = <LED_COLOR_ID_ 139 color = <LED_COLOR_ID_GREEN>;
140 }; 140 };
141 141
142 led@2 { 142 led@2 {
143 reg = <2>; 143 reg = <2>;
144 led-max-microamp = <50 144 led-max-microamp = <5000>;
145 function = LED_FUNCTIO 145 function = LED_FUNCTION_INDICATOR;
146 color = <LED_COLOR_ID_ 146 color = <LED_COLOR_ID_BLUE>;
147 }; 147 };
148 }; 148 };
149 }; 149 };
150 150
151 &blsp_i2c2 { 151 &blsp_i2c2 {
152 status = "okay"; 152 status = "okay";
153 153
154 accelerometer@10 { 154 accelerometer@10 {
155 compatible = "bosch,bmc156_acc 155 compatible = "bosch,bmc156_accel";
156 reg = <0x10>; 156 reg = <0x10>;
157 157
158 /* 158 /*
159 * For some reason the interru 159 * For some reason the interrupt line is usually not connected
160 * to the BMC156. However, the 160 * to the BMC156. However, there are two pads next to the chip
161 * that can be shorted to make 161 * that can be shorted to make it work if needed.
162 * 162 *
163 * interrupt-parent = <&tlmm>; 163 * interrupt-parent = <&tlmm>;
164 * interrupts = <116 IRQ_TYPE_ 164 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
165 */ 165 */
166 166
167 pinctrl-names = "default"; 167 pinctrl-names = "default";
168 pinctrl-0 = <&accel_int_defaul 168 pinctrl-0 = <&accel_int_default>;
169 169
170 vdd-supply = <&pm8916_l17>; 170 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 171 vddio-supply = <&pm8916_l6>;
172 172
173 mount-matrix = "0", "1", "0", 173 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 174 "-1", "0", "0",
175 "0", "0", "1"; 175 "0", "0", "1";
176 }; 176 };
177 177
178 magnetometer@12 { 178 magnetometer@12 {
179 compatible = "bosch,bmc156_mag 179 compatible = "bosch,bmc156_magn";
180 reg = <0x12>; 180 reg = <0x12>;
181 181
182 interrupt-parent = <&tlmm>; 182 interrupt-parent = <&tlmm>;
183 interrupts = <113 IRQ_TYPE_EDG 183 interrupts = <113 IRQ_TYPE_EDGE_RISING>;
184 184
185 pinctrl-names = "default"; 185 pinctrl-names = "default";
186 pinctrl-0 = <&magn_int_default 186 pinctrl-0 = <&magn_int_default>;
187 187
188 vdd-supply = <&pm8916_l17>; 188 vdd-supply = <&pm8916_l17>;
189 vddio-supply = <&pm8916_l6>; 189 vddio-supply = <&pm8916_l6>;
190 }; 190 };
191 191
192 light-sensor@23 { 192 light-sensor@23 {
193 compatible = "liteon,ltr559"; 193 compatible = "liteon,ltr559";
194 reg = <0x23>; 194 reg = <0x23>;
195 proximity-near-level = <75>; 195 proximity-near-level = <75>;
196 196
197 interrupt-parent = <&tlmm>; 197 interrupt-parent = <&tlmm>;
198 interrupts = <115 IRQ_TYPE_EDG 198 interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
199 199
200 pinctrl-names = "default"; 200 pinctrl-names = "default";
201 pinctrl-0 = <&light_int_defaul 201 pinctrl-0 = <&light_int_default>;
202 202
203 vdd-supply = <&pm8916_l17>; 203 vdd-supply = <&pm8916_l17>;
204 vddio-supply = <&pm8916_l6>; 204 vddio-supply = <&pm8916_l6>;
205 }; 205 };
206 206
207 gyroscope@68 { 207 gyroscope@68 {
208 compatible = "bosch,bmg160"; 208 compatible = "bosch,bmg160";
209 reg = <0x68>; 209 reg = <0x68>;
210 210
211 interrupt-parent = <&tlmm>; 211 interrupt-parent = <&tlmm>;
212 interrupts = <23 IRQ_TYPE_EDGE 212 interrupts = <23 IRQ_TYPE_EDGE_RISING>,
213 <22 IRQ_TYPE_EDGE 213 <22 IRQ_TYPE_EDGE_RISING>;
214 214
215 pinctrl-names = "default"; 215 pinctrl-names = "default";
216 pinctrl-0 = <&gyro_int_default 216 pinctrl-0 = <&gyro_int_default>;
217 217
218 vdd-supply = <&pm8916_l17>; 218 vdd-supply = <&pm8916_l17>;
219 vddio-supply = <&pm8916_l6>; 219 vddio-supply = <&pm8916_l6>;
220 }; 220 };
221 }; 221 };
222 222
223 &blsp_i2c5 { 223 &blsp_i2c5 {
224 status = "okay"; 224 status = "okay";
225 225
226 rmi4@20 { 226 rmi4@20 {
227 compatible = "syna,rmi4-i2c"; 227 compatible = "syna,rmi4-i2c";
228 reg = <0x20>; 228 reg = <0x20>;
229 #address-cells = <1>; 229 #address-cells = <1>;
230 #size-cells = <0>; 230 #size-cells = <0>;
231 231
232 interrupt-parent = <&tlmm>; 232 interrupt-parent = <&tlmm>;
233 interrupts = <13 IRQ_TYPE_EDGE 233 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
234 234
235 vdd-supply = <®_ctp>; 235 vdd-supply = <®_ctp>;
236 vio-supply = <&pm8916_l6>; 236 vio-supply = <&pm8916_l6>;
237 237
238 pinctrl-names = "default"; 238 pinctrl-names = "default";
239 pinctrl-0 = <&tp_int_default>; 239 pinctrl-0 = <&tp_int_default>;
240 240
241 syna,startup-delay-ms = <10>; 241 syna,startup-delay-ms = <10>;
242 242
243 rmi4-f01@1 { 243 rmi4-f01@1 {
244 reg = <0x1>; 244 reg = <0x1>;
245 syna,nosleep-mode = <1 245 syna,nosleep-mode = <1>; /* Allow sleeping */
246 }; 246 };
247 247
248 rmi4-f12@12 { 248 rmi4-f12@12 {
249 reg = <0x12>; 249 reg = <0x12>;
250 syna,sensor-type = <1> 250 syna,sensor-type = <1>; /* Touchscreen */
251 }; 251 };
252 }; 252 };
253 }; 253 };
254 254
255 &blsp_uart2 { 255 &blsp_uart2 {
256 status = "okay"; 256 status = "okay";
257 }; 257 };
258 258
259 &pm8916_bms { 259 &pm8916_bms {
260 status = "okay"; 260 status = "okay";
261 261
262 monitored-battery = <&battery>; 262 monitored-battery = <&battery>;
263 power-supplies = <&pm8916_charger>; 263 power-supplies = <&pm8916_charger>;
264 }; 264 };
265 265
266 &pm8916_charger { 266 &pm8916_charger {
267 status = "okay"; 267 status = "okay";
268 268
269 monitored-battery = <&battery>; 269 monitored-battery = <&battery>;
270 270
271 qcom,fast-charge-safe-current = <90000 271 qcom,fast-charge-safe-current = <900000>;
272 qcom,fast-charge-safe-voltage = <43000 272 qcom,fast-charge-safe-voltage = <4300000>;
273 }; 273 };
274 274
275 &pm8916_codec { 275 &pm8916_codec {
276 qcom,micbias-lvl = <2800>; 276 qcom,micbias-lvl = <2800>;
277 qcom,mbhc-vthreshold-low = <75 150 237 277 qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
278 qcom,mbhc-vthreshold-high = <75 150 23 278 qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
279 qcom,hphl-jack-type-normally-open; 279 qcom,hphl-jack-type-normally-open;
280 }; 280 };
281 281
282 &pm8916_resin { 282 &pm8916_resin {
283 status = "okay"; 283 status = "okay";
284 linux,code = <KEY_VOLUMEDOWN>; 284 linux,code = <KEY_VOLUMEDOWN>;
285 }; 285 };
286 286
287 &pm8916_rpm_regulators { 287 &pm8916_rpm_regulators {
288 pm8916_l17: l17 { 288 pm8916_l17: l17 {
289 regulator-min-microvolt = <285 289 regulator-min-microvolt = <2850000>;
290 regulator-max-microvolt = <285 290 regulator-max-microvolt = <2850000>;
291 }; 291 };
292 }; 292 };
293 293
294 &pm8916_vib { 294 &pm8916_vib {
295 status = "okay"; 295 status = "okay";
296 }; 296 };
297 297
298 &sdhc_1 { 298 &sdhc_1 {
299 status = "okay"; 299 status = "okay";
300 }; 300 };
301 301
302 &sdhc_2 { 302 &sdhc_2 {
303 status = "okay"; 303 status = "okay";
304 non-removable; 304 non-removable;
305 }; 305 };
306 306
307 &sound { 307 &sound {
308 audio-routing = 308 audio-routing =
309 "AMIC1", "MIC BIAS Internal1", 309 "AMIC1", "MIC BIAS Internal1",
310 "AMIC2", "MIC BIAS Internal2", 310 "AMIC2", "MIC BIAS Internal2",
311 "AMIC3", "MIC BIAS Internal3"; 311 "AMIC3", "MIC BIAS Internal3";
312 }; 312 };
313 313
314 &usb { 314 &usb {
315 status = "okay"; 315 status = "okay";
316 dr_mode = "peripheral"; 316 dr_mode = "peripheral";
317 extcon = <&pm8916_charger>; 317 extcon = <&pm8916_charger>;
318 }; 318 };
319 319
320 &usb_hs_phy { 320 &usb_hs_phy {
321 extcon = <&pm8916_charger>; 321 extcon = <&pm8916_charger>;
322 }; 322 };
323 323
324 &venus { 324 &venus {
325 status = "okay"; 325 status = "okay";
326 }; 326 };
327 327
328 &venus_mem { 328 &venus_mem {
329 status = "okay"; 329 status = "okay";
330 }; 330 };
331 331
332 &wcnss { 332 &wcnss {
333 status = "okay"; 333 status = "okay";
334 }; 334 };
335 335
336 &wcnss_iris { 336 &wcnss_iris {
337 compatible = "qcom,wcn3620"; 337 compatible = "qcom,wcn3620";
338 }; 338 };
339 339
340 &wcnss_mem { 340 &wcnss_mem {
341 status = "okay"; 341 status = "okay";
342 }; 342 };
343 343
344 &tlmm { 344 &tlmm {
345 accel_int_default: accel-int-default-s 345 accel_int_default: accel-int-default-state {
346 pins = "gpio116"; 346 pins = "gpio116";
347 function = "gpio"; 347 function = "gpio";
348 348
349 drive-strength = <2>; 349 drive-strength = <2>;
350 bias-disable; 350 bias-disable;
351 }; 351 };
352 352
353 camera_flash_default: camera-flash-def 353 camera_flash_default: camera-flash-default-state {
354 pins = "gpio31", "gpio32"; 354 pins = "gpio31", "gpio32";
355 function = "gpio"; 355 function = "gpio";
356 356
357 drive-strength = <2>; 357 drive-strength = <2>;
358 bias-disable; 358 bias-disable;
359 }; 359 };
360 360
361 ctp_pwr_en_default: ctp-pwr-en-default 361 ctp_pwr_en_default: ctp-pwr-en-default-state {
362 pins = "gpio17"; 362 pins = "gpio17";
363 function = "gpio"; 363 function = "gpio";
364 364
365 drive-strength = <2>; 365 drive-strength = <2>;
366 bias-disable; 366 bias-disable;
367 }; 367 };
368 368
369 gpio_keys_default: gpio-keys-default-s 369 gpio_keys_default: gpio-keys-default-state {
370 pins = "gpio107"; 370 pins = "gpio107";
371 function = "gpio"; 371 function = "gpio";
372 372
373 drive-strength = <2>; 373 drive-strength = <2>;
374 bias-pull-up; 374 bias-pull-up;
375 }; 375 };
376 376
377 gyro_int_default: gyro-int-default-sta 377 gyro_int_default: gyro-int-default-state {
378 pins = "gpio22", "gpio23"; 378 pins = "gpio22", "gpio23";
379 function = "gpio"; 379 function = "gpio";
380 380
381 drive-strength = <2>; 381 drive-strength = <2>;
382 bias-disable; 382 bias-disable;
383 }; 383 };
384 384
385 light_int_default: light-int-default-s 385 light_int_default: light-int-default-state {
386 pins = "gpio115"; 386 pins = "gpio115";
387 function = "gpio"; 387 function = "gpio";
388 388
389 drive-strength = <2>; 389 drive-strength = <2>;
390 bias-disable; 390 bias-disable;
391 }; 391 };
392 392
393 magn_int_default: magn-int-default-sta 393 magn_int_default: magn-int-default-state {
394 pins = "gpio113"; 394 pins = "gpio113";
395 function = "gpio"; 395 function = "gpio";
396 396
397 drive-strength = <2>; 397 drive-strength = <2>;
398 bias-disable; 398 bias-disable;
399 }; 399 };
400 400
401 tp_int_default: tp-int-default-state { 401 tp_int_default: tp-int-default-state {
402 pins = "gpio13"; 402 pins = "gpio13";
403 function = "gpio"; 403 function = "gpio";
404 404
405 drive-strength = <2>; 405 drive-strength = <2>;
406 bias-disable; 406 bias-disable;
407 }; 407 };
408 }; 408 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.