1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h> 8 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
12 9
13 / { 10 / {
14 model = "BQ Aquaris X5 (Longcheer L891 11 model = "BQ Aquaris X5 (Longcheer L8910)";
15 compatible = "longcheer,l8910", "qcom, 12 compatible = "longcheer,l8910", "qcom,msm8916";
16 chassis-type = "handset"; <<
17 13
18 aliases { 14 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ !! 15 serial0 = &blsp1_uart2;
20 mmc1 = &sdhc_2; /* SD card */ <<
21 serial0 = &blsp_uart2; <<
22 }; 16 };
23 17
24 chosen { 18 chosen {
25 stdout-path = "serial0"; 19 stdout-path = "serial0";
26 }; 20 };
27 21
28 speaker_amp: audio-amplifier { <<
29 compatible = "awinic,aw8738"; <<
30 mode-gpios = <&tlmm 114 GPIO_A <<
31 awinic,mode = <5>; <<
32 sound-name-prefix = "Speaker A <<
33 <<
34 pinctrl-0 = <&spk_ext_pa_defau <<
35 pinctrl-names = "default"; <<
36 }; <<
37 <<
38 flash-led-controller { <<
39 compatible = "ocs,ocp8110"; <<
40 enable-gpios = <&tlmm 49 GPIO_ <<
41 flash-gpios = <&tlmm 119 GPIO_ <<
42 <<
43 pinctrl-0 = <&camera_front_fla <<
44 pinctrl-names = "default"; <<
45 <<
46 flash_led: led { <<
47 function = LED_FUNCTIO <<
48 color = <LED_COLOR_ID_ <<
49 flash-max-timeout-us = <<
50 }; <<
51 }; <<
52 <<
53 gpio-keys { 22 gpio-keys {
54 compatible = "gpio-keys"; 23 compatible = "gpio-keys";
55 24
56 pinctrl-names = "default"; 25 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_keys_defaul 26 pinctrl-0 = <&gpio_keys_default>;
58 27
59 label = "GPIO Buttons"; 28 label = "GPIO Buttons";
60 29
61 button-volume-up { !! 30 volume-up {
62 label = "Volume Up"; 31 label = "Volume Up";
63 gpios = <&tlmm 107 GPI !! 32 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLU 33 linux,code = <KEY_VOLUMEUP>;
65 }; 34 };
66 }; 35 };
67 36
68 leds { 37 leds {
69 compatible = "gpio-leds"; 38 compatible = "gpio-leds";
70 39
71 led-0 { 40 led-0 {
72 gpios = <&tlmm 17 GPIO !! 41 gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
73 color = <LED_COLOR_ID_ 42 color = <LED_COLOR_ID_WHITE>;
74 default-state = "off"; 43 default-state = "off";
75 function = LED_FUNCTIO 44 function = LED_FUNCTION_KBD_BACKLIGHT;
76 45
77 pinctrl-names = "defau 46 pinctrl-names = "default";
78 pinctrl-0 = <&button_b 47 pinctrl-0 = <&button_backlight_default>;
79 }; 48 };
80 }; 49 };
81 50
82 usb_id: usb-id { 51 usb_id: usb-id {
83 compatible = "linux,extcon-usb 52 compatible = "linux,extcon-usb-gpio";
84 id-gpios = <&tlmm 110 GPIO_ACT !! 53 id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
85 pinctrl-names = "default"; 54 pinctrl-names = "default";
86 pinctrl-0 = <&usb_id_default>; 55 pinctrl-0 = <&usb_id_default>;
87 }; 56 };
88 }; 57 };
89 58
90 &blsp_i2c2 { <<
91 status = "okay"; <<
92 <<
93 led-controller@30 { <<
94 compatible = "kinetic,ktd2026" <<
95 reg = <0x30>; <<
96 #address-cells = <1>; <<
97 #size-cells = <0>; <<
98 <<
99 vin-supply = <&pm8916_l17>; <<
100 vio-supply = <&pm8916_l6>; <<
101 <<
102 pinctrl-0 = <&status_led_defau <<
103 pinctrl-names = "default"; <<
104 <<
105 multi-led { <<
106 color = <LED_COLOR_ID_ <<
107 function = LED_FUNCTIO <<
108 <<
109 #address-cells = <1>; <<
110 #size-cells = <0>; <<
111 <<
112 led@0 { <<
113 reg = <0>; <<
114 color = <LED_C <<
115 }; <<
116 <<
117 led@1 { <<
118 reg = <1>; <<
119 color = <LED_C <<
120 }; <<
121 <<
122 led@2 { <<
123 reg = <2>; <<
124 color = <LED_C <<
125 }; <<
126 }; <<
127 }; <<
128 <<
129 flash-led-controller@53 { <<
130 compatible = "silergy,sy7802"; <<
131 reg = <0x53>; <<
132 <<
133 enable-gpios = <&tlmm 16 GPIO_ <<
134 <<
135 pinctrl-0 = <&camera_rear_flas <<
136 pinctrl-names = "default"; <<
137 <<
138 #address-cells = <1>; <<
139 #size-cells = <0>; <<
140 <<
141 led@0 { <<
142 reg = <0>; <<
143 function = LED_FUNCTIO <<
144 color = <LED_COLOR_ID_ <<
145 led-sources = <0>, <1> <<
146 }; <<
147 }; <<
148 }; <<
149 <<
150 &blsp_i2c3 { 59 &blsp_i2c3 {
151 status = "okay"; 60 status = "okay";
152 61
153 magnetometer@d { 62 magnetometer@d {
154 compatible = "asahi-kasei,ak09 63 compatible = "asahi-kasei,ak09911";
155 reg = <0x0d>; 64 reg = <0x0d>;
156 65
157 vdd-supply = <&pm8916_l17>; 66 vdd-supply = <&pm8916_l17>;
158 vid-supply = <&pm8916_l6>; 67 vid-supply = <&pm8916_l6>;
159 68
160 reset-gpios = <&tlmm 111 GPIO_ !! 69 reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
161 70
162 pinctrl-names = "default"; 71 pinctrl-names = "default";
163 pinctrl-0 = <&mag_reset_defaul 72 pinctrl-0 = <&mag_reset_default>;
164 }; 73 };
165 74
166 imu@68 { 75 imu@68 {
167 compatible = "bosch,bmi160"; 76 compatible = "bosch,bmi160";
168 reg = <0x68>; 77 reg = <0x68>;
169 78
170 vdd-supply = <&pm8916_l17>; 79 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 80 vddio-supply = <&pm8916_l6>;
172 81
173 mount-matrix = "0", "1", "0", 82 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 83 "-1", "0", "0",
175 "0", "0", "1"; 84 "0", "0", "1";
176 }; 85 };
177 }; 86 };
178 87
179 &blsp_uart2 { !! 88 &blsp1_uart2 {
180 status = "okay"; 89 status = "okay";
181 }; 90 };
182 91
183 &mpss_mem { <<
184 reg = <0x0 0x86800000 0x0 0x5000000>; <<
185 }; <<
186 <<
187 &pm8916_codec { <<
188 qcom,micbias-lvl = <2800>; <<
189 qcom,mbhc-vthreshold-low = <75 100 120 <<
190 qcom,mbhc-vthreshold-high = <75 100 12 <<
191 qcom,hphl-jack-type-normally-open; <<
192 }; <<
193 <<
194 &pm8916_gpios { <<
195 status_led_default: status-led-default <<
196 pins = "gpio3"; <<
197 function = PMIC_GPIO_FUNC_NORM <<
198 power-source = <PM8916_GPIO_VP <<
199 bias-disable; <<
200 output-high; <<
201 }; <<
202 }; <<
203 <<
204 &pm8916_resin { 92 &pm8916_resin {
205 status = "okay"; 93 status = "okay";
206 linux,code = <KEY_VOLUMEDOWN>; 94 linux,code = <KEY_VOLUMEDOWN>;
207 }; 95 };
208 96
209 &pm8916_rpm_regulators { !! 97 &pm8916_vib {
210 pm8916_l17: l17 { !! 98 status = "okay";
211 regulator-min-microvolt = <285 <<
212 regulator-max-microvolt = <285 <<
213 }; <<
214 }; 99 };
215 100
216 &pm8916_vib { !! 101 &pronto {
217 status = "okay"; 102 status = "okay";
218 }; 103 };
219 104
220 &sdhc_1 { 105 &sdhc_1 {
221 status = "okay"; 106 status = "okay";
>> 107
>> 108 pinctrl-names = "default", "sleep";
>> 109 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 110 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
222 }; 111 };
223 112
224 &sdhc_2 { 113 &sdhc_2 {
225 status = "okay"; 114 status = "okay";
226 115
227 pinctrl-names = "default", "sleep"; 116 pinctrl-names = "default", "sleep";
228 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 117 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
229 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 118 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
230 <<
231 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; <<
232 }; <<
233 119
234 &sound { !! 120 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
235 /* <<
236 * Provide widgets/pin-switches to all <<
237 * The hardware does not provide a way <<
238 * headphone jack when the speaker is <<
239 */ <<
240 model = "bq-paella"; <<
241 widgets = <<
242 "Speaker", "Speaker", <<
243 "Headphone", "Headphones"; <<
244 pin-switches = "Speaker"; <<
245 audio-routing = <<
246 "Speaker", "Speaker Amp OUT", <<
247 "Speaker Amp IN", "HPH_R", <<
248 "Headphones", "HPH_L", <<
249 "Headphones", "HPH_R", <<
250 "AMIC1", "MIC BIAS External1", <<
251 "AMIC2", "MIC BIAS Internal2", <<
252 "AMIC3", "MIC BIAS External1"; <<
253 aux-devs = <&speaker_amp>; <<
254 }; 121 };
255 122
256 &usb { 123 &usb {
257 status = "okay"; 124 status = "okay";
258 extcon = <&usb_id>, <&usb_id>; 125 extcon = <&usb_id>, <&usb_id>;
259 }; 126 };
260 127
261 &usb_hs_phy { 128 &usb_hs_phy {
262 extcon = <&usb_id>; 129 extcon = <&usb_id>;
263 }; 130 };
264 131
265 &venus { !! 132 &smd_rpm_regulators {
266 status = "okay"; !! 133 vdd_l1_l2_l3-supply = <&pm8916_s3>;
267 }; !! 134 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 135 vdd_l7-supply = <&pm8916_s4>;
268 136
269 &venus_mem { !! 137 s3 {
270 status = "okay"; !! 138 regulator-min-microvolt = <1200000>;
271 }; !! 139 regulator-max-microvolt = <1300000>;
>> 140 };
272 141
273 &wcnss { !! 142 s4 {
274 status = "okay"; !! 143 regulator-min-microvolt = <1800000>;
275 }; !! 144 regulator-max-microvolt = <2100000>;
>> 145 };
276 146
277 &wcnss_iris { !! 147 l1 {
278 compatible = "qcom,wcn3620"; !! 148 regulator-min-microvolt = <1225000>;
279 }; !! 149 regulator-max-microvolt = <1225000>;
>> 150 };
280 151
281 &wcnss_mem { !! 152 l2 {
282 status = "okay"; !! 153 regulator-min-microvolt = <1200000>;
283 }; !! 154 regulator-max-microvolt = <1200000>;
>> 155 };
284 156
285 &tlmm { !! 157 l4 {
286 button_backlight_default: button-backl !! 158 regulator-min-microvolt = <2050000>;
287 pins = "gpio17"; !! 159 regulator-max-microvolt = <2050000>;
288 function = "gpio"; !! 160 };
289 161
290 drive-strength = <2>; !! 162 l5 {
291 bias-disable; !! 163 regulator-min-microvolt = <1800000>;
>> 164 regulator-max-microvolt = <1800000>;
292 }; 165 };
293 166
294 camera_front_flash_default: camera-fro !! 167 l6 {
295 pins = "gpio49", "gpio119"; !! 168 regulator-min-microvolt = <1800000>;
296 function = "gpio"; !! 169 regulator-max-microvolt = <1800000>;
297 drive-strength = <2>; <<
298 bias-disable; <<
299 }; 170 };
300 171
301 camera_rear_flash_default: camera-rear !! 172 l7 {
302 pins = "gpio9", "gpio16", "gpi !! 173 regulator-min-microvolt = <1800000>;
303 function = "gpio"; !! 174 regulator-max-microvolt = <1800000>;
304 drive-strength = <2>; <<
305 bias-disable; <<
306 }; 175 };
307 176
308 gpio_keys_default: gpio-keys-default-s !! 177 l8 {
309 pins = "gpio107"; !! 178 regulator-min-microvolt = <2850000>;
310 function = "gpio"; !! 179 regulator-max-microvolt = <2900000>;
>> 180 };
311 181
312 drive-strength = <2>; !! 182 l9 {
313 bias-pull-up; !! 183 regulator-min-microvolt = <3300000>;
>> 184 regulator-max-microvolt = <3300000>;
314 }; 185 };
315 186
316 mag_reset_default: mag-reset-default-s !! 187 l10 {
317 pins = "gpio111"; !! 188 regulator-min-microvolt = <2700000>;
>> 189 regulator-max-microvolt = <2800000>;
>> 190 };
>> 191
>> 192 l11 {
>> 193 regulator-min-microvolt = <1800000>;
>> 194 regulator-max-microvolt = <2950000>;
>> 195 regulator-allow-set-load;
>> 196 regulator-system-load = <200000>;
>> 197 };
>> 198
>> 199 l12 {
>> 200 regulator-min-microvolt = <1800000>;
>> 201 regulator-max-microvolt = <2950000>;
>> 202 };
>> 203
>> 204 l13 {
>> 205 regulator-min-microvolt = <3075000>;
>> 206 regulator-max-microvolt = <3075000>;
>> 207 };
>> 208
>> 209 l14 {
>> 210 regulator-min-microvolt = <1800000>;
>> 211 regulator-max-microvolt = <3300000>;
>> 212 };
>> 213
>> 214 l15 {
>> 215 regulator-min-microvolt = <1800000>;
>> 216 regulator-max-microvolt = <3300000>;
>> 217 };
>> 218
>> 219 l16 {
>> 220 regulator-min-microvolt = <1800000>;
>> 221 regulator-max-microvolt = <3300000>;
>> 222 };
>> 223
>> 224 l17 {
>> 225 regulator-min-microvolt = <2850000>;
>> 226 regulator-max-microvolt = <2850000>;
>> 227 };
>> 228
>> 229 l18 {
>> 230 regulator-min-microvolt = <2700000>;
>> 231 regulator-max-microvolt = <2700000>;
>> 232 };
>> 233 };
>> 234
>> 235 &msmgpio {
>> 236 button_backlight_default: button-backlight-default {
>> 237 pins = "gpio17";
318 function = "gpio"; 238 function = "gpio";
319 239
320 drive-strength = <2>; 240 drive-strength = <2>;
321 bias-disable; 241 bias-disable;
322 }; 242 };
323 243
324 sdc2_cd_default: sdc2-cd-default-state !! 244 gpio_keys_default: gpio-keys-default {
325 pins = "gpio38"; !! 245 pins = "gpio107";
326 function = "gpio"; 246 function = "gpio";
>> 247
327 drive-strength = <2>; 248 drive-strength = <2>;
328 bias-disable; !! 249 bias-pull-up;
329 }; 250 };
330 251
331 spk_ext_pa_default: spk-ext-pa-default !! 252 mag_reset_default: mag-reset-default {
332 pins = "gpio114"; !! 253 pins = "gpio111";
333 function = "gpio"; 254 function = "gpio";
>> 255
334 drive-strength = <2>; 256 drive-strength = <2>;
335 bias-disable; 257 bias-disable;
336 }; 258 };
337 259
338 usb_id_default: usb-id-default-state { !! 260 usb_id_default: usb-id-default {
339 pins = "gpio110"; 261 pins = "gpio110";
340 function = "gpio"; 262 function = "gpio";
341 263
342 drive-strength = <8>; 264 drive-strength = <8>;
343 bias-pull-up; 265 bias-pull-up;
344 }; 266 };
345 }; 267 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.