1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 /dts-v1/; 3 /dts-v1/;
4 4
5 #include "msm8916-pm8916.dtsi" 5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi" <<
7 <<
8 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h> 8 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
12 9
13 / { 10 / {
14 model = "BQ Aquaris X5 (Longcheer L891 11 model = "BQ Aquaris X5 (Longcheer L8910)";
15 compatible = "longcheer,l8910", "qcom, 12 compatible = "longcheer,l8910", "qcom,msm8916";
16 chassis-type = "handset"; 13 chassis-type = "handset";
17 14
18 aliases { 15 aliases {
19 mmc0 = &sdhc_1; /* eMMC */ !! 16 serial0 = &blsp1_uart2;
20 mmc1 = &sdhc_2; /* SD card */ <<
21 serial0 = &blsp_uart2; <<
22 }; 17 };
23 18
24 chosen { 19 chosen {
25 stdout-path = "serial0"; 20 stdout-path = "serial0";
26 }; 21 };
27 22
28 speaker_amp: audio-amplifier { <<
29 compatible = "awinic,aw8738"; <<
30 mode-gpios = <&tlmm 114 GPIO_A <<
31 awinic,mode = <5>; <<
32 sound-name-prefix = "Speaker A <<
33 <<
34 pinctrl-0 = <&spk_ext_pa_defau <<
35 pinctrl-names = "default"; <<
36 }; <<
37 <<
38 flash-led-controller { 23 flash-led-controller {
39 compatible = "ocs,ocp8110"; 24 compatible = "ocs,ocp8110";
40 enable-gpios = <&tlmm 49 GPIO_ 25 enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
41 flash-gpios = <&tlmm 119 GPIO_ 26 flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
42 27
43 pinctrl-0 = <&camera_front_fla 28 pinctrl-0 = <&camera_front_flash_default>;
44 pinctrl-names = "default"; 29 pinctrl-names = "default";
45 30
46 flash_led: led { 31 flash_led: led {
47 function = LED_FUNCTIO 32 function = LED_FUNCTION_FLASH;
48 color = <LED_COLOR_ID_ 33 color = <LED_COLOR_ID_WHITE>;
49 flash-max-timeout-us = 34 flash-max-timeout-us = <250000>;
50 }; 35 };
51 }; 36 };
52 37
53 gpio-keys { 38 gpio-keys {
54 compatible = "gpio-keys"; 39 compatible = "gpio-keys";
55 40
56 pinctrl-names = "default"; 41 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_keys_defaul 42 pinctrl-0 = <&gpio_keys_default>;
58 43
59 label = "GPIO Buttons"; 44 label = "GPIO Buttons";
60 45
61 button-volume-up { 46 button-volume-up {
62 label = "Volume Up"; 47 label = "Volume Up";
63 gpios = <&tlmm 107 GPI 48 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLU 49 linux,code = <KEY_VOLUMEUP>;
65 }; 50 };
66 }; 51 };
67 52
68 leds { 53 leds {
69 compatible = "gpio-leds"; 54 compatible = "gpio-leds";
70 55
71 led-0 { 56 led-0 {
72 gpios = <&tlmm 17 GPIO 57 gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
73 color = <LED_COLOR_ID_ 58 color = <LED_COLOR_ID_WHITE>;
74 default-state = "off"; 59 default-state = "off";
75 function = LED_FUNCTIO 60 function = LED_FUNCTION_KBD_BACKLIGHT;
76 61
77 pinctrl-names = "defau 62 pinctrl-names = "default";
78 pinctrl-0 = <&button_b 63 pinctrl-0 = <&button_backlight_default>;
79 }; 64 };
80 }; 65 };
81 66
82 usb_id: usb-id { 67 usb_id: usb-id {
83 compatible = "linux,extcon-usb 68 compatible = "linux,extcon-usb-gpio";
84 id-gpios = <&tlmm 110 GPIO_ACT !! 69 id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
85 pinctrl-names = "default"; 70 pinctrl-names = "default";
86 pinctrl-0 = <&usb_id_default>; 71 pinctrl-0 = <&usb_id_default>;
87 }; 72 };
88 }; 73 };
89 74
90 &blsp_i2c2 { <<
91 status = "okay"; <<
92 <<
93 led-controller@30 { <<
94 compatible = "kinetic,ktd2026" <<
95 reg = <0x30>; <<
96 #address-cells = <1>; <<
97 #size-cells = <0>; <<
98 <<
99 vin-supply = <&pm8916_l17>; <<
100 vio-supply = <&pm8916_l6>; <<
101 <<
102 pinctrl-0 = <&status_led_defau <<
103 pinctrl-names = "default"; <<
104 <<
105 multi-led { <<
106 color = <LED_COLOR_ID_ <<
107 function = LED_FUNCTIO <<
108 <<
109 #address-cells = <1>; <<
110 #size-cells = <0>; <<
111 <<
112 led@0 { <<
113 reg = <0>; <<
114 color = <LED_C <<
115 }; <<
116 <<
117 led@1 { <<
118 reg = <1>; <<
119 color = <LED_C <<
120 }; <<
121 <<
122 led@2 { <<
123 reg = <2>; <<
124 color = <LED_C <<
125 }; <<
126 }; <<
127 }; <<
128 <<
129 flash-led-controller@53 { <<
130 compatible = "silergy,sy7802"; <<
131 reg = <0x53>; <<
132 <<
133 enable-gpios = <&tlmm 16 GPIO_ <<
134 <<
135 pinctrl-0 = <&camera_rear_flas <<
136 pinctrl-names = "default"; <<
137 <<
138 #address-cells = <1>; <<
139 #size-cells = <0>; <<
140 <<
141 led@0 { <<
142 reg = <0>; <<
143 function = LED_FUNCTIO <<
144 color = <LED_COLOR_ID_ <<
145 led-sources = <0>, <1> <<
146 }; <<
147 }; <<
148 }; <<
149 <<
150 &blsp_i2c3 { 75 &blsp_i2c3 {
151 status = "okay"; 76 status = "okay";
152 77
153 magnetometer@d { 78 magnetometer@d {
154 compatible = "asahi-kasei,ak09 79 compatible = "asahi-kasei,ak09911";
155 reg = <0x0d>; 80 reg = <0x0d>;
156 81
157 vdd-supply = <&pm8916_l17>; 82 vdd-supply = <&pm8916_l17>;
158 vid-supply = <&pm8916_l6>; 83 vid-supply = <&pm8916_l6>;
159 84
160 reset-gpios = <&tlmm 111 GPIO_ 85 reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
161 86
162 pinctrl-names = "default"; 87 pinctrl-names = "default";
163 pinctrl-0 = <&mag_reset_defaul 88 pinctrl-0 = <&mag_reset_default>;
164 }; 89 };
165 90
166 imu@68 { 91 imu@68 {
167 compatible = "bosch,bmi160"; 92 compatible = "bosch,bmi160";
168 reg = <0x68>; 93 reg = <0x68>;
169 94
170 vdd-supply = <&pm8916_l17>; 95 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>; 96 vddio-supply = <&pm8916_l6>;
172 97
173 mount-matrix = "0", "1", "0", 98 mount-matrix = "0", "1", "0",
174 "-1", "0", "0", 99 "-1", "0", "0",
175 "0", "0", "1"; 100 "0", "0", "1";
176 }; 101 };
177 }; 102 };
178 103
179 &blsp_uart2 { !! 104 &blsp1_uart2 {
180 status = "okay"; 105 status = "okay";
181 }; 106 };
182 107
183 &mpss_mem { <<
184 reg = <0x0 0x86800000 0x0 0x5000000>; <<
185 }; <<
186 <<
187 &pm8916_codec { <<
188 qcom,micbias-lvl = <2800>; <<
189 qcom,mbhc-vthreshold-low = <75 100 120 <<
190 qcom,mbhc-vthreshold-high = <75 100 12 <<
191 qcom,hphl-jack-type-normally-open; <<
192 }; <<
193 <<
194 &pm8916_gpios { <<
195 status_led_default: status-led-default <<
196 pins = "gpio3"; <<
197 function = PMIC_GPIO_FUNC_NORM <<
198 power-source = <PM8916_GPIO_VP <<
199 bias-disable; <<
200 output-high; <<
201 }; <<
202 }; <<
203 <<
204 &pm8916_resin { 108 &pm8916_resin {
205 status = "okay"; 109 status = "okay";
206 linux,code = <KEY_VOLUMEDOWN>; 110 linux,code = <KEY_VOLUMEDOWN>;
207 }; 111 };
208 112
209 &pm8916_rpm_regulators { 113 &pm8916_rpm_regulators {
210 pm8916_l17: l17 { 114 pm8916_l17: l17 {
211 regulator-min-microvolt = <285 115 regulator-min-microvolt = <2850000>;
212 regulator-max-microvolt = <285 116 regulator-max-microvolt = <2850000>;
213 }; 117 };
214 }; 118 };
215 119
216 &pm8916_vib { 120 &pm8916_vib {
217 status = "okay"; 121 status = "okay";
218 }; 122 };
219 123
220 &sdhc_1 { 124 &sdhc_1 {
221 status = "okay"; 125 status = "okay";
>> 126
>> 127 pinctrl-names = "default", "sleep";
>> 128 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 129 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
222 }; 130 };
223 131
224 &sdhc_2 { 132 &sdhc_2 {
225 status = "okay"; 133 status = "okay";
226 134
227 pinctrl-names = "default", "sleep"; 135 pinctrl-names = "default", "sleep";
228 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 136 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
229 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 137 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
230 138
231 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 139 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
232 }; 140 };
233 141
234 &sound { <<
235 /* <<
236 * Provide widgets/pin-switches to all <<
237 * The hardware does not provide a way <<
238 * headphone jack when the speaker is <<
239 */ <<
240 model = "bq-paella"; <<
241 widgets = <<
242 "Speaker", "Speaker", <<
243 "Headphone", "Headphones"; <<
244 pin-switches = "Speaker"; <<
245 audio-routing = <<
246 "Speaker", "Speaker Amp OUT", <<
247 "Speaker Amp IN", "HPH_R", <<
248 "Headphones", "HPH_L", <<
249 "Headphones", "HPH_R", <<
250 "AMIC1", "MIC BIAS External1", <<
251 "AMIC2", "MIC BIAS Internal2", <<
252 "AMIC3", "MIC BIAS External1"; <<
253 aux-devs = <&speaker_amp>; <<
254 }; <<
255 <<
256 &usb { 142 &usb {
257 status = "okay"; 143 status = "okay";
258 extcon = <&usb_id>, <&usb_id>; 144 extcon = <&usb_id>, <&usb_id>;
259 }; 145 };
260 146
261 &usb_hs_phy { 147 &usb_hs_phy {
262 extcon = <&usb_id>; 148 extcon = <&usb_id>;
263 }; 149 };
264 150
265 &venus { <<
266 status = "okay"; <<
267 }; <<
268 <<
269 &venus_mem { <<
270 status = "okay"; <<
271 }; <<
272 <<
273 &wcnss { 151 &wcnss {
274 status = "okay"; 152 status = "okay";
275 }; 153 };
276 154
277 &wcnss_iris { 155 &wcnss_iris {
278 compatible = "qcom,wcn3620"; 156 compatible = "qcom,wcn3620";
279 }; 157 };
280 158
281 &wcnss_mem { <<
282 status = "okay"; <<
283 }; <<
284 <<
285 &tlmm { 159 &tlmm {
286 button_backlight_default: button-backl 160 button_backlight_default: button-backlight-default-state {
287 pins = "gpio17"; 161 pins = "gpio17";
288 function = "gpio"; 162 function = "gpio";
289 163
290 drive-strength = <2>; 164 drive-strength = <2>;
291 bias-disable; 165 bias-disable;
292 }; 166 };
293 167
294 camera_front_flash_default: camera-fro 168 camera_front_flash_default: camera-front-flash-default-state {
295 pins = "gpio49", "gpio119"; 169 pins = "gpio49", "gpio119";
296 function = "gpio"; 170 function = "gpio";
297 drive-strength = <2>; 171 drive-strength = <2>;
298 bias-disable; 172 bias-disable;
299 }; 173 };
300 174
301 camera_rear_flash_default: camera-rear <<
302 pins = "gpio9", "gpio16", "gpi <<
303 function = "gpio"; <<
304 drive-strength = <2>; <<
305 bias-disable; <<
306 }; <<
307 <<
308 gpio_keys_default: gpio-keys-default-s 175 gpio_keys_default: gpio-keys-default-state {
309 pins = "gpio107"; 176 pins = "gpio107";
310 function = "gpio"; 177 function = "gpio";
311 178
312 drive-strength = <2>; 179 drive-strength = <2>;
313 bias-pull-up; 180 bias-pull-up;
314 }; 181 };
315 182
316 mag_reset_default: mag-reset-default-s 183 mag_reset_default: mag-reset-default-state {
317 pins = "gpio111"; 184 pins = "gpio111";
318 function = "gpio"; 185 function = "gpio";
319 186
320 drive-strength = <2>; <<
321 bias-disable; <<
322 }; <<
323 <<
324 sdc2_cd_default: sdc2-cd-default-state <<
325 pins = "gpio38"; <<
326 function = "gpio"; <<
327 drive-strength = <2>; <<
328 bias-disable; <<
329 }; <<
330 <<
331 spk_ext_pa_default: spk-ext-pa-default <<
332 pins = "gpio114"; <<
333 function = "gpio"; <<
334 drive-strength = <2>; 187 drive-strength = <2>;
335 bias-disable; 188 bias-disable;
336 }; 189 };
337 190
338 usb_id_default: usb-id-default-state { 191 usb_id_default: usb-id-default-state {
339 pins = "gpio110"; 192 pins = "gpio110";
340 function = "gpio"; 193 function = "gpio";
341 194
342 drive-strength = <8>; 195 drive-strength = <8>;
343 bias-pull-up; 196 bias-pull-up;
344 }; 197 };
345 }; 198 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.