1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 #include "msm8916-pm8916.dtsi" 3 #include "msm8916-pm8916.dtsi"
4 #include "msm8916-modem-qdsp6.dtsi" 4 #include "msm8916-modem-qdsp6.dtsi"
5 5
6 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq 8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/sound/apq8016-lpass.h> 10 #include <dt-bindings/sound/apq8016-lpass.h>
11 11
12 / { 12 / {
13 aliases { 13 aliases {
14 mmc0 = &sdhc_1; /* eMMC */ 14 mmc0 = &sdhc_1; /* eMMC */
15 mmc1 = &sdhc_2; /* SD card */ 15 mmc1 = &sdhc_2; /* SD card */
16 serial0 = &blsp_uart2; 16 serial0 = &blsp_uart2;
17 }; 17 };
18 18
19 chosen { 19 chosen {
20 stdout-path = "serial0"; 20 stdout-path = "serial0";
21 }; 21 };
22 22
23 reserved-memory { 23 reserved-memory {
24 /* Additional memory used by S 24 /* Additional memory used by Samsung firmware modifications */
25 tz-apps@85500000 { 25 tz-apps@85500000 {
26 reg = <0x0 0x85500000 26 reg = <0x0 0x85500000 0x0 0xb00000>;
27 no-map; 27 no-map;
28 }; 28 };
29 }; 29 };
30 30
31 battery: battery { 31 battery: battery {
32 compatible = "simple-battery"; 32 compatible = "simple-battery";
33 precharge-current-microamp = < 33 precharge-current-microamp = <450000>;
34 precharge-upper-limit-microvol 34 precharge-upper-limit-microvolt = <3500000>;
35 }; 35 };
36 36
37 clk_pwm: pwm { 37 clk_pwm: pwm {
38 compatible = "clk-pwm"; 38 compatible = "clk-pwm";
39 #pwm-cells = <2>; 39 #pwm-cells = <2>;
40 40
41 clocks = <&gcc GCC_GP2_CLK>; 41 clocks = <&gcc GCC_GP2_CLK>;
42 42
43 pinctrl-names = "default"; 43 pinctrl-names = "default";
44 pinctrl-0 = <&motor_pwm_defaul 44 pinctrl-0 = <&motor_pwm_default>;
45 status = "disabled"; 45 status = "disabled";
46 }; 46 };
47 47
48 gpio-keys { 48 gpio-keys {
49 compatible = "gpio-keys"; 49 compatible = "gpio-keys";
50 50
51 pinctrl-names = "default"; 51 pinctrl-names = "default";
52 pinctrl-0 = <&gpio_keys_defaul 52 pinctrl-0 = <&gpio_keys_default>;
53 53
54 label = "GPIO Buttons"; 54 label = "GPIO Buttons";
55 55
56 button-volume-up { 56 button-volume-up {
57 label = "Volume Up"; 57 label = "Volume Up";
58 gpios = <&tlmm 107 GPI 58 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_VOLU 59 linux,code = <KEY_VOLUMEUP>;
60 }; 60 };
61 61
62 button-home { 62 button-home {
63 label = "Home"; 63 label = "Home";
64 gpios = <&tlmm 109 GPI 64 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_HOME 65 linux,code = <KEY_HOMEPAGE>;
66 }; 66 };
67 }; 67 };
68 68
69 gpio-hall-sensor { 69 gpio-hall-sensor {
70 compatible = "gpio-keys"; 70 compatible = "gpio-keys";
71 71
72 pinctrl-names = "default"; 72 pinctrl-names = "default";
73 pinctrl-0 = <&gpio_hall_sensor 73 pinctrl-0 = <&gpio_hall_sensor_default>;
74 74
75 label = "GPIO Hall Effect Sens 75 label = "GPIO Hall Effect Sensor";
76 76
77 event-hall-sensor { 77 event-hall-sensor {
78 label = "Hall Effect S 78 label = "Hall Effect Sensor";
79 gpios = <&tlmm 52 GPIO 79 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
80 linux,input-type = <EV 80 linux,input-type = <EV_SW>;
81 linux,code = <SW_LID>; 81 linux,code = <SW_LID>;
82 linux,can-disable; 82 linux,can-disable;
83 }; 83 };
84 }; 84 };
85 85
86 /* 86 /*
87 * NOTE: A5 connects GPIO 76 to a regl 87 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
88 * driver IC but A3 connects the same 88 * driver IC but A3 connects the same signal to an ENABLE pin of
89 * the driver. 89 * the driver.
90 */ 90 */
91 reg_motor_vdd: regulator-motor-vdd { 91 reg_motor_vdd: regulator-motor-vdd {
92 compatible = "regulator-fixed" 92 compatible = "regulator-fixed";
93 regulator-name = "motor_vdd"; 93 regulator-name = "motor_vdd";
94 regulator-min-microvolt = <300 94 regulator-min-microvolt = <3000000>;
95 regulator-max-microvolt = <300 95 regulator-max-microvolt = <3000000>;
96 96
97 gpio = <&tlmm 76 GPIO_ACTIVE_H 97 gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
98 enable-active-high; 98 enable-active-high;
99 99
100 pinctrl-names = "default"; 100 pinctrl-names = "default";
101 pinctrl-0 = <&motor_en_default 101 pinctrl-0 = <&motor_en_default>;
102 }; 102 };
103 103
104 reg_vdd_tsp_a: regulator-vdd-tsp-a { 104 reg_vdd_tsp_a: regulator-vdd-tsp-a {
105 compatible = "regulator-fixed" 105 compatible = "regulator-fixed";
106 regulator-name = "vdd_tsp_a"; 106 regulator-name = "vdd_tsp_a";
107 regulator-min-microvolt = <330 107 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <330 108 regulator-max-microvolt = <3300000>;
109 109
110 gpio = <&tlmm 73 GPIO_ACTIVE_H 110 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
111 enable-active-high; 111 enable-active-high;
112 112
113 pinctrl-names = "default"; 113 pinctrl-names = "default";
114 pinctrl-0 = <&tsp_en_default>; 114 pinctrl-0 = <&tsp_en_default>;
115 }; 115 };
116 116
117 i2c-muic { 117 i2c-muic {
118 compatible = "i2c-gpio"; 118 compatible = "i2c-gpio";
119 sda-gpios = <&tlmm 105 (GPIO_A 119 sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
120 scl-gpios = <&tlmm 106 (GPIO_A 120 scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
121 121
122 pinctrl-names = "default"; 122 pinctrl-names = "default";
123 pinctrl-0 = <&muic_i2c_default 123 pinctrl-0 = <&muic_i2c_default>;
124 124
125 #address-cells = <1>; 125 #address-cells = <1>;
126 #size-cells = <0>; 126 #size-cells = <0>;
127 127
128 muic: extcon@25 { 128 muic: extcon@25 {
129 compatible = "siliconm 129 compatible = "siliconmitus,sm5502-muic";
130 130
131 reg = <0x25>; 131 reg = <0x25>;
132 interrupt-parent = <&t 132 interrupt-parent = <&tlmm>;
133 interrupts = <12 IRQ_T 133 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
134 134
135 pinctrl-names = "defau 135 pinctrl-names = "default";
136 pinctrl-0 = <&muic_int 136 pinctrl-0 = <&muic_int_default>;
137 137
138 usb_con: connector { 138 usb_con: connector {
139 compatible = " 139 compatible = "usb-b-connector";
140 label = "micro 140 label = "micro-USB";
141 type = "micro" 141 type = "micro";
142 }; 142 };
143 }; 143 };
144 }; 144 };
145 145
146 i2c-tkey { 146 i2c-tkey {
147 compatible = "i2c-gpio"; 147 compatible = "i2c-gpio";
148 sda-gpios = <&tlmm 16 (GPIO_AC 148 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
149 scl-gpios = <&tlmm 17 (GPIO_AC 149 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
150 150
151 pinctrl-names = "default"; 151 pinctrl-names = "default";
152 pinctrl-0 = <&tkey_i2c_default 152 pinctrl-0 = <&tkey_i2c_default>;
153 153
154 #address-cells = <1>; 154 #address-cells = <1>;
155 #size-cells = <0>; 155 #size-cells = <0>;
156 156
157 touchkey: touchkey@20 { 157 touchkey: touchkey@20 {
158 /* Note: Actually an A 158 /* Note: Actually an ABOV MCU that implements same interface */
159 compatible = "corerive 159 compatible = "coreriver,tc360-touchkey";
160 reg = <0x20>; 160 reg = <0x20>;
161 161
162 interrupt-parent = <&t 162 interrupt-parent = <&tlmm>;
163 interrupts = <98 IRQ_T 163 interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
164 164
165 /* vcc/vdd-supply are 165 /* vcc/vdd-supply are board-specific */
166 vddio-supply = <&pm891 166 vddio-supply = <&pm8916_l6>;
167 167
168 linux,keycodes = <KEY_ 168 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
169 169
170 pinctrl-names = "defau 170 pinctrl-names = "default";
171 pinctrl-0 = <&tkey_def 171 pinctrl-0 = <&tkey_default>;
172 }; 172 };
173 }; 173 };
174 174
175 i2c-nfc { 175 i2c-nfc {
176 compatible = "i2c-gpio"; 176 compatible = "i2c-gpio";
177 sda-gpios = <&tlmm 0 (GPIO_ACT 177 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
178 scl-gpios = <&tlmm 1 (GPIO_ACT 178 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
179 179
180 pinctrl-names = "default"; 180 pinctrl-names = "default";
181 pinctrl-0 = <&nfc_i2c_default> 181 pinctrl-0 = <&nfc_i2c_default>;
182 182
183 #address-cells = <1>; 183 #address-cells = <1>;
184 #size-cells = <0>; 184 #size-cells = <0>;
185 185
186 nfc@27 { 186 nfc@27 {
187 compatible = "samsung, 187 compatible = "samsung,s3fwrn5-i2c";
188 reg = <0x27>; 188 reg = <0x27>;
189 189
190 interrupt-parent = <&t 190 interrupt-parent = <&tlmm>;
191 interrupts = <21 IRQ_T 191 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
192 192
193 en-gpios = <&tlmm 20 G 193 en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
194 wake-gpios = <&tlmm 49 194 wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
195 195
196 clocks = <&rpmcc RPM_S 196 clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
197 197
198 pinctrl-names = "defau 198 pinctrl-names = "default";
199 pinctrl-0 = <&nfc_defa 199 pinctrl-0 = <&nfc_default &nfc_clk_req>;
200 }; 200 };
201 }; 201 };
202 202
203 vibrator: vibrator { 203 vibrator: vibrator {
204 compatible = "pwm-vibrator"; 204 compatible = "pwm-vibrator";
205 205
206 pwms = <&clk_pwm 0 100000>; 206 pwms = <&clk_pwm 0 100000>;
207 pwm-names = "enable"; 207 pwm-names = "enable";
208 208
209 vcc-supply = <®_motor_vdd>; 209 vcc-supply = <®_motor_vdd>;
210 status = "disabled"; 210 status = "disabled";
211 }; 211 };
212 }; 212 };
213 213
214 &blsp_i2c1 { 214 &blsp_i2c1 {
215 status = "okay"; 215 status = "okay";
216 216
217 speaker_codec: audio-codec@34 { 217 speaker_codec: audio-codec@34 {
218 compatible = "nxp,tfa9895"; 218 compatible = "nxp,tfa9895";
219 reg = <0x34>; 219 reg = <0x34>;
220 vddd-supply = <&pm8916_l5>; 220 vddd-supply = <&pm8916_l5>;
221 sound-name-prefix = "Speaker"; 221 sound-name-prefix = "Speaker";
222 #sound-dai-cells = <0>; 222 #sound-dai-cells = <0>;
223 }; 223 };
224 }; 224 };
225 225
226 &blsp_i2c2 { 226 &blsp_i2c2 {
227 status = "okay"; 227 status = "okay";
228 228
229 accelerometer: accelerometer@10 { 229 accelerometer: accelerometer@10 {
230 compatible = "bosch,bmc150_acc 230 compatible = "bosch,bmc150_accel";
231 reg = <0x10>; 231 reg = <0x10>;
232 interrupt-parent = <&tlmm>; 232 interrupt-parent = <&tlmm>;
233 interrupts = <115 IRQ_TYPE_EDG 233 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
234 234
235 vdd-supply = <&pm8916_l17>; 235 vdd-supply = <&pm8916_l17>;
236 vddio-supply = <&pm8916_l5>; 236 vddio-supply = <&pm8916_l5>;
237 237
238 pinctrl-names = "default"; 238 pinctrl-names = "default";
239 pinctrl-0 = <&accel_int_defaul 239 pinctrl-0 = <&accel_int_default>;
240 }; 240 };
241 241
242 magnetometer@12 { 242 magnetometer@12 {
243 compatible = "bosch,bmc150_mag 243 compatible = "bosch,bmc150_magn";
244 reg = <0x12>; 244 reg = <0x12>;
245 245
246 vdd-supply = <&pm8916_l17>; 246 vdd-supply = <&pm8916_l17>;
247 vddio-supply = <&pm8916_l5>; 247 vddio-supply = <&pm8916_l5>;
248 }; 248 };
249 }; 249 };
250 250
251 &blsp_i2c4 { 251 &blsp_i2c4 {
252 status = "okay"; 252 status = "okay";
253 253
254 fuel-gauge@35 { 254 fuel-gauge@35 {
255 compatible = "richtek,rt5033-b 255 compatible = "richtek,rt5033-battery";
256 reg = <0x35>; 256 reg = <0x35>;
257 interrupt-parent = <&tlmm>; 257 interrupt-parent = <&tlmm>;
258 interrupts = <121 IRQ_TYPE_EDG 258 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
259 259
260 pinctrl-names = "default"; 260 pinctrl-names = "default";
261 pinctrl-0 = <&fg_alert_default 261 pinctrl-0 = <&fg_alert_default>;
262 262
263 power-supplies = <&charger>; 263 power-supplies = <&charger>;
264 }; 264 };
265 }; 265 };
266 266
267 &blsp_i2c6 { 267 &blsp_i2c6 {
268 status = "okay"; 268 status = "okay";
269 269
270 pmic@34 { 270 pmic@34 {
271 compatible = "richtek,rt5033"; 271 compatible = "richtek,rt5033";
272 reg = <0x34>; 272 reg = <0x34>;
273 273
274 interrupts-extended = <&tlmm 6 274 interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
275 275
276 pinctrl-0 = <&pmic_int_default 276 pinctrl-0 = <&pmic_int_default>;
277 pinctrl-names = "default"; 277 pinctrl-names = "default";
278 278
279 regulators { 279 regulators {
280 rt5033_reg_safe_ldo: S 280 rt5033_reg_safe_ldo: SAFE_LDO {
281 regulator-min- 281 regulator-min-microvolt = <4900000>;
282 regulator-max- 282 regulator-max-microvolt = <4900000>;
283 regulator-alwa 283 regulator-always-on;
284 }; 284 };
285 285
286 /* 286 /*
287 * Needed for camera, 287 * Needed for camera, but not used yet.
288 * Define empty nodes 288 * Define empty nodes to allow disabling the unused
289 * regulators. 289 * regulators.
290 */ 290 */
291 LDO {}; 291 LDO {};
292 BUCK {}; 292 BUCK {};
293 }; 293 };
294 294
295 charger: charger { 295 charger: charger {
296 compatible = "richtek, 296 compatible = "richtek,rt5033-charger";
297 monitored-battery = <& 297 monitored-battery = <&battery>;
298 richtek,usb-connector 298 richtek,usb-connector = <&usb_con>;
299 }; 299 };
300 }; 300 };
301 }; 301 };
302 302
303 &blsp_uart2 { 303 &blsp_uart2 {
304 status = "okay"; 304 status = "okay";
305 }; 305 };
306 306
307 &gpu { 307 &gpu {
308 status = "okay"; 308 status = "okay";
309 }; 309 };
310 310
311 /* 311 /*
312 * For some reason the speaker amplifier is co 312 * For some reason the speaker amplifier is connected to the second SD line
313 * (MI2S_2_D1) instead of the first (MI2S_2_D0 313 * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
314 * device tree, otherwise audio will seemingly 314 * device tree, otherwise audio will seemingly play fine on the wrong SD line
315 * but the speaker stays silent. 315 * but the speaker stays silent.
316 * 316 *
317 * When routing audio via QDSP6 (the default) 317 * When routing audio via QDSP6 (the default) the &lpass node is reserved and
318 * the definitions from &q6afedai are used. Wh 318 * the definitions from &q6afedai are used. When the modem is disabled audio can
319 * be alternatively routed directly to the LPA 319 * be alternatively routed directly to the LPASS hardware with reduced latency.
320 * The definitions for &lpass are here for com 320 * The definitions for &lpass are here for completeness to simplify changing the
321 * setup with minor changes to the DT (either 321 * setup with minor changes to the DT (either manually or with DT overlays).
322 */ 322 */
323 &lpass { 323 &lpass {
324 dai-link@3 { 324 dai-link@3 {
325 reg = <MI2S_QUATERNARY>; 325 reg = <MI2S_QUATERNARY>;
326 qcom,playback-sd-lines = <1>; 326 qcom,playback-sd-lines = <1>;
327 }; 327 };
328 }; 328 };
329 329
330 &mdss { 330 &mdss {
331 status = "okay"; 331 status = "okay";
332 }; 332 };
333 333
334 &mdss_dsi0 { 334 &mdss_dsi0 {
335 pinctrl-names = "default", "sleep"; 335 pinctrl-names = "default", "sleep";
336 pinctrl-0 = <&mdss_default>; 336 pinctrl-0 = <&mdss_default>;
337 pinctrl-1 = <&mdss_sleep>; 337 pinctrl-1 = <&mdss_sleep>;
338 }; 338 };
339 339
340 &mpss_mem { 340 &mpss_mem {
341 reg = <0x0 0x86800000 0x0 0x5400000>; 341 reg = <0x0 0x86800000 0x0 0x5400000>;
342 }; 342 };
343 343
344 &pm8916_resin { 344 &pm8916_resin {
345 status = "okay"; 345 status = "okay";
346 linux,code = <KEY_VOLUMEDOWN>; 346 linux,code = <KEY_VOLUMEDOWN>;
347 }; 347 };
348 348
349 &pm8916_rpm_regulators { 349 &pm8916_rpm_regulators {
350 pm8916_l17: l17 { 350 pm8916_l17: l17 {
351 regulator-min-microvolt = <285 351 regulator-min-microvolt = <2850000>;
352 regulator-max-microvolt = <285 352 regulator-max-microvolt = <2850000>;
353 }; 353 };
354 }; 354 };
355 355
356 &q6afedai { 356 &q6afedai {
357 dai@22 { 357 dai@22 {
358 reg = <QUATERNARY_MI2S_RX>; 358 reg = <QUATERNARY_MI2S_RX>;
359 qcom,sd-lines = <1>; 359 qcom,sd-lines = <1>;
360 }; 360 };
361 }; 361 };
362 362
363 &sdhc_1 { 363 &sdhc_1 {
364 status = "okay"; 364 status = "okay";
365 }; 365 };
366 366
367 &sdhc_2 { 367 &sdhc_2 {
368 status = "okay"; 368 status = "okay";
369 369
370 pinctrl-names = "default", "sleep"; 370 pinctrl-names = "default", "sleep";
371 pinctrl-0 = <&sdc2_default &sdc2_cd_de 371 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa 372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
373 373
374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
375 }; 375 };
376 376
377 &sound { 377 &sound {
378 model = "samsung-a2015"; 378 model = "samsung-a2015";
379 audio-routing = 379 audio-routing =
380 "AMIC1", "MIC BIAS External1", 380 "AMIC1", "MIC BIAS External1",
381 "AMIC2", "MIC BIAS Internal2", 381 "AMIC2", "MIC BIAS Internal2",
382 "AMIC3", "MIC BIAS External1"; 382 "AMIC3", "MIC BIAS External1";
383 383
384 pinctrl-0 = <&cdc_pdm_default &sec_mi2 384 pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ 385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
386 pinctrl-names = "default", "sleep"; 386 pinctrl-names = "default", "sleep";
387 387
388 sound_link_backend2: backend2-dai-link 388 sound_link_backend2: backend2-dai-link {
389 link-name = "Quaternary MI2S"; 389 link-name = "Quaternary MI2S";
390 390
391 cpu { 391 cpu {
392 sound-dai = <&q6afedai 392 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
393 }; 393 };
394 platform { 394 platform {
395 sound-dai = <&q6routin 395 sound-dai = <&q6routing>;
396 }; 396 };
397 codec { 397 codec {
398 sound-dai = <&speaker_ 398 sound-dai = <&speaker_codec>;
399 }; 399 };
400 }; 400 };
401 }; 401 };
402 402
403 &usb { 403 &usb {
404 status = "okay"; 404 status = "okay";
405 extcon = <&muic>, <&muic>; 405 extcon = <&muic>, <&muic>;
406 }; 406 };
407 407
408 &usb_hs_phy { 408 &usb_hs_phy {
409 extcon = <&muic>; 409 extcon = <&muic>;
410 }; 410 };
411 411
412 &venus { 412 &venus {
413 status = "okay"; 413 status = "okay";
414 }; 414 };
415 415
416 &venus_mem { 416 &venus_mem {
417 status = "okay"; 417 status = "okay";
418 }; 418 };
419 419
420 &tlmm { 420 &tlmm {
421 accel_int_default: accel-int-default-s 421 accel_int_default: accel-int-default-state {
422 pins = "gpio115"; 422 pins = "gpio115";
423 function = "gpio"; 423 function = "gpio";
424 424
425 drive-strength = <2>; 425 drive-strength = <2>;
426 bias-disable; 426 bias-disable;
427 }; 427 };
428 428
429 fg_alert_default: fg-alert-default-sta 429 fg_alert_default: fg-alert-default-state {
430 pins = "gpio121"; 430 pins = "gpio121";
431 function = "gpio"; 431 function = "gpio";
432 432
433 drive-strength = <2>; 433 drive-strength = <2>;
434 bias-disable; 434 bias-disable;
435 }; 435 };
436 436
437 gpio_keys_default: gpio-keys-default-s 437 gpio_keys_default: gpio-keys-default-state {
438 pins = "gpio107", "gpio109"; 438 pins = "gpio107", "gpio109";
439 function = "gpio"; 439 function = "gpio";
440 440
441 drive-strength = <2>; 441 drive-strength = <2>;
442 bias-pull-up; 442 bias-pull-up;
443 }; 443 };
444 444
445 gpio_hall_sensor_default: gpio-hall-se 445 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
446 pins = "gpio52"; 446 pins = "gpio52";
447 function = "gpio"; 447 function = "gpio";
448 448
449 drive-strength = <2>; 449 drive-strength = <2>;
450 bias-disable; 450 bias-disable;
451 }; 451 };
452 452
453 mdss_default: mdss-default-state { 453 mdss_default: mdss-default-state {
454 pins = "gpio25"; 454 pins = "gpio25";
455 function = "gpio"; 455 function = "gpio";
456 456
457 drive-strength = <8>; 457 drive-strength = <8>;
458 bias-disable; 458 bias-disable;
459 }; 459 };
460 mdss_sleep: mdss-sleep-state { 460 mdss_sleep: mdss-sleep-state {
461 pins = "gpio25"; 461 pins = "gpio25";
462 function = "gpio"; 462 function = "gpio";
463 463
464 drive-strength = <2>; 464 drive-strength = <2>;
465 bias-pull-down; 465 bias-pull-down;
466 }; 466 };
467 467
468 motor_en_default: motor-en-default-sta 468 motor_en_default: motor-en-default-state {
469 pins = "gpio76"; 469 pins = "gpio76";
470 function = "gpio"; 470 function = "gpio";
471 471
472 drive-strength = <2>; 472 drive-strength = <2>;
473 bias-disable; 473 bias-disable;
474 }; 474 };
475 475
476 motor_pwm_default: motor-pwm-default-s 476 motor_pwm_default: motor-pwm-default-state {
477 pins = "gpio50"; 477 pins = "gpio50";
478 function = "gcc_gp2_clk_a"; 478 function = "gcc_gp2_clk_a";
479 }; 479 };
480 480
481 muic_i2c_default: muic-i2c-default-sta 481 muic_i2c_default: muic-i2c-default-state {
482 pins = "gpio105", "gpio106"; 482 pins = "gpio105", "gpio106";
483 function = "gpio"; 483 function = "gpio";
484 484
485 drive-strength = <2>; 485 drive-strength = <2>;
486 bias-disable; 486 bias-disable;
487 }; 487 };
488 488
489 muic_int_default: muic-int-default-sta 489 muic_int_default: muic-int-default-state {
490 pins = "gpio12"; 490 pins = "gpio12";
491 function = "gpio"; 491 function = "gpio";
492 492
493 drive-strength = <2>; 493 drive-strength = <2>;
494 bias-disable; 494 bias-disable;
495 }; 495 };
496 496
497 nfc_default: nfc-default-state { 497 nfc_default: nfc-default-state {
498 nfc-pins { 498 nfc-pins {
499 pins = "gpio20", "gpio 499 pins = "gpio20", "gpio49";
500 function = "gpio"; 500 function = "gpio";
501 501
502 drive-strength = <2>; 502 drive-strength = <2>;
503 bias-disable; 503 bias-disable;
504 }; 504 };
505 505
506 irq-pins { 506 irq-pins {
507 pins = "gpio21"; 507 pins = "gpio21";
508 function = "gpio"; 508 function = "gpio";
509 509
510 drive-strength = <2>; 510 drive-strength = <2>;
511 bias-pull-down; 511 bias-pull-down;
512 }; 512 };
513 }; 513 };
514 514
515 nfc_i2c_default: nfc-i2c-default-state 515 nfc_i2c_default: nfc-i2c-default-state {
516 pins = "gpio0", "gpio1"; 516 pins = "gpio0", "gpio1";
517 function = "gpio"; 517 function = "gpio";
518 518
519 drive-strength = <2>; 519 drive-strength = <2>;
520 bias-disable; 520 bias-disable;
521 }; 521 };
522 522
523 pmic_int_default: pmic-int-default-sta 523 pmic_int_default: pmic-int-default-state {
524 pins = "gpio62"; 524 pins = "gpio62";
525 function = "gpio"; 525 function = "gpio";
526 drive-strength = <2>; 526 drive-strength = <2>;
527 bias-disable; 527 bias-disable;
528 }; 528 };
529 529
530 sdc2_cd_default: sdc2-cd-default-state 530 sdc2_cd_default: sdc2-cd-default-state {
531 pins = "gpio38"; 531 pins = "gpio38";
532 function = "gpio"; 532 function = "gpio";
533 drive-strength = <2>; 533 drive-strength = <2>;
534 bias-disable; 534 bias-disable;
535 }; 535 };
536 536
537 tkey_default: tkey-default-state { 537 tkey_default: tkey-default-state {
538 pins = "gpio98"; 538 pins = "gpio98";
539 function = "gpio"; 539 function = "gpio";
540 540
541 drive-strength = <2>; 541 drive-strength = <2>;
542 bias-disable; 542 bias-disable;
543 }; 543 };
544 544
545 tkey_i2c_default: tkey-i2c-default-sta 545 tkey_i2c_default: tkey-i2c-default-state {
546 pins = "gpio16", "gpio17"; 546 pins = "gpio16", "gpio17";
547 function = "gpio"; 547 function = "gpio";
548 548
549 drive-strength = <2>; 549 drive-strength = <2>;
550 bias-disable; 550 bias-disable;
551 }; 551 };
552 552
553 tsp_en_default: tsp-en-default-state { 553 tsp_en_default: tsp-en-default-state {
554 pins = "gpio73"; 554 pins = "gpio73";
555 function = "gpio"; 555 function = "gpio";
556 556
557 drive-strength = <2>; 557 drive-strength = <2>;
558 bias-disable; 558 bias-disable;
559 }; 559 };
560 560
561 ts_int_default: ts-int-default-state { 561 ts_int_default: ts-int-default-state {
562 pins = "gpio13"; 562 pins = "gpio13";
563 function = "gpio"; 563 function = "gpio";
564 564
565 drive-strength = <2>; 565 drive-strength = <2>;
566 bias-disable; 566 bias-disable;
567 }; 567 };
568 }; 568 };
569 569
570 &pm8916_gpios { 570 &pm8916_gpios {
571 nfc_clk_req: nfc-clk-req-state { 571 nfc_clk_req: nfc-clk-req-state {
572 pins = "gpio2"; 572 pins = "gpio2";
573 function = "func1"; 573 function = "func1";
574 574
575 input-enable; 575 input-enable;
576 bias-disable; 576 bias-disable;
577 power-source = <PM8916_GPIO_L2 577 power-source = <PM8916_GPIO_L2>;
578 }; 578 };
579 }; 579 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.