1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 #include "msm8916-pm8916.dtsi" 3 #include "msm8916-pm8916.dtsi"
4 #include "msm8916-modem-qdsp6.dtsi" <<
5 <<
6 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq 6 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h <<
10 #include <dt-bindings/sound/apq8016-lpass.h> <<
11 7
12 / { 8 / {
13 aliases { 9 aliases {
14 mmc0 = &sdhc_1; /* eMMC */ !! 10 serial0 = &blsp1_uart2;
15 mmc1 = &sdhc_2; /* SD card */ <<
16 serial0 = &blsp_uart2; <<
17 }; 11 };
18 12
19 chosen { 13 chosen {
20 stdout-path = "serial0"; 14 stdout-path = "serial0";
21 }; 15 };
22 16
23 reserved-memory { 17 reserved-memory {
24 /* Additional memory used by S 18 /* Additional memory used by Samsung firmware modifications */
25 tz-apps@85500000 { 19 tz-apps@85500000 {
26 reg = <0x0 0x85500000 20 reg = <0x0 0x85500000 0x0 0xb00000>;
27 no-map; 21 no-map;
28 }; 22 };
29 }; 23 };
30 24
31 battery: battery { <<
32 compatible = "simple-battery"; <<
33 precharge-current-microamp = < <<
34 precharge-upper-limit-microvol <<
35 }; <<
36 <<
37 clk_pwm: pwm { <<
38 compatible = "clk-pwm"; <<
39 #pwm-cells = <2>; <<
40 <<
41 clocks = <&gcc GCC_GP2_CLK>; <<
42 <<
43 pinctrl-names = "default"; <<
44 pinctrl-0 = <&motor_pwm_defaul <<
45 status = "disabled"; <<
46 }; <<
47 <<
48 gpio-keys { 25 gpio-keys {
49 compatible = "gpio-keys"; 26 compatible = "gpio-keys";
50 27
51 pinctrl-names = "default"; 28 pinctrl-names = "default";
52 pinctrl-0 = <&gpio_keys_defaul 29 pinctrl-0 = <&gpio_keys_default>;
53 30
54 label = "GPIO Buttons"; 31 label = "GPIO Buttons";
55 32
56 button-volume-up { !! 33 volume-up {
57 label = "Volume Up"; 34 label = "Volume Up";
58 gpios = <&tlmm 107 GPI !! 35 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_VOLU 36 linux,code = <KEY_VOLUMEUP>;
60 }; 37 };
61 38
62 button-home { !! 39 home {
63 label = "Home"; 40 label = "Home";
64 gpios = <&tlmm 109 GPI !! 41 gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_HOME 42 linux,code = <KEY_HOMEPAGE>;
66 }; 43 };
67 }; 44 };
68 45
69 gpio-hall-sensor { 46 gpio-hall-sensor {
70 compatible = "gpio-keys"; 47 compatible = "gpio-keys";
71 48
72 pinctrl-names = "default"; 49 pinctrl-names = "default";
73 pinctrl-0 = <&gpio_hall_sensor 50 pinctrl-0 = <&gpio_hall_sensor_default>;
74 51
75 label = "GPIO Hall Effect Sens 52 label = "GPIO Hall Effect Sensor";
76 53
77 event-hall-sensor { !! 54 hall-sensor {
78 label = "Hall Effect S 55 label = "Hall Effect Sensor";
79 gpios = <&tlmm 52 GPIO !! 56 gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
80 linux,input-type = <EV 57 linux,input-type = <EV_SW>;
81 linux,code = <SW_LID>; 58 linux,code = <SW_LID>;
82 linux,can-disable; 59 linux,can-disable;
83 }; 60 };
84 }; 61 };
85 62
86 /* !! 63 reg_vdd_tsp: regulator-vdd-tsp {
87 * NOTE: A5 connects GPIO 76 to a regl <<
88 * driver IC but A3 connects the same <<
89 * the driver. <<
90 */ <<
91 reg_motor_vdd: regulator-motor-vdd { <<
92 compatible = "regulator-fixed" 64 compatible = "regulator-fixed";
93 regulator-name = "motor_vdd"; !! 65 regulator-name = "vdd_tsp";
94 regulator-min-microvolt = <300 <<
95 regulator-max-microvolt = <300 <<
96 <<
97 gpio = <&tlmm 76 GPIO_ACTIVE_H <<
98 enable-active-high; <<
99 <<
100 pinctrl-names = "default"; <<
101 pinctrl-0 = <&motor_en_default <<
102 }; <<
103 <<
104 reg_vdd_tsp_a: regulator-vdd-tsp-a { <<
105 compatible = "regulator-fixed" <<
106 regulator-name = "vdd_tsp_a"; <<
107 regulator-min-microvolt = <330 66 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <330 67 regulator-max-microvolt = <3300000>;
109 68
110 gpio = <&tlmm 73 GPIO_ACTIVE_H !! 69 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
111 enable-active-high; 70 enable-active-high;
112 71
113 pinctrl-names = "default"; 72 pinctrl-names = "default";
114 pinctrl-0 = <&tsp_en_default>; 73 pinctrl-0 = <&tsp_en_default>;
115 }; 74 };
116 75
117 i2c-muic { 76 i2c-muic {
118 compatible = "i2c-gpio"; 77 compatible = "i2c-gpio";
119 sda-gpios = <&tlmm 105 (GPIO_A !! 78 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
120 scl-gpios = <&tlmm 106 (GPIO_A !! 79 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
121 80
122 pinctrl-names = "default"; 81 pinctrl-names = "default";
123 pinctrl-0 = <&muic_i2c_default 82 pinctrl-0 = <&muic_i2c_default>;
124 83
125 #address-cells = <1>; 84 #address-cells = <1>;
126 #size-cells = <0>; 85 #size-cells = <0>;
127 86
128 muic: extcon@25 { 87 muic: extcon@25 {
129 compatible = "siliconm 88 compatible = "siliconmitus,sm5502-muic";
130 89
131 reg = <0x25>; 90 reg = <0x25>;
132 interrupt-parent = <&t !! 91 interrupt-parent = <&msmgpio>;
133 interrupts = <12 IRQ_T 92 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
134 93
135 pinctrl-names = "defau 94 pinctrl-names = "default";
136 pinctrl-0 = <&muic_int 95 pinctrl-0 = <&muic_int_default>;
137 <<
138 usb_con: connector { <<
139 compatible = " <<
140 label = "micro <<
141 type = "micro" <<
142 }; <<
143 }; 96 };
144 }; 97 };
145 <<
146 i2c-tkey { <<
147 compatible = "i2c-gpio"; <<
148 sda-gpios = <&tlmm 16 (GPIO_AC <<
149 scl-gpios = <&tlmm 17 (GPIO_AC <<
150 <<
151 pinctrl-names = "default"; <<
152 pinctrl-0 = <&tkey_i2c_default <<
153 <<
154 #address-cells = <1>; <<
155 #size-cells = <0>; <<
156 <<
157 touchkey: touchkey@20 { <<
158 /* Note: Actually an A <<
159 compatible = "corerive <<
160 reg = <0x20>; <<
161 <<
162 interrupt-parent = <&t <<
163 interrupts = <98 IRQ_T <<
164 <<
165 /* vcc/vdd-supply are <<
166 vddio-supply = <&pm891 <<
167 <<
168 linux,keycodes = <KEY_ <<
169 <<
170 pinctrl-names = "defau <<
171 pinctrl-0 = <&tkey_def <<
172 }; <<
173 }; <<
174 <<
175 i2c-nfc { <<
176 compatible = "i2c-gpio"; <<
177 sda-gpios = <&tlmm 0 (GPIO_ACT <<
178 scl-gpios = <&tlmm 1 (GPIO_ACT <<
179 <<
180 pinctrl-names = "default"; <<
181 pinctrl-0 = <&nfc_i2c_default> <<
182 <<
183 #address-cells = <1>; <<
184 #size-cells = <0>; <<
185 <<
186 nfc@27 { <<
187 compatible = "samsung, <<
188 reg = <0x27>; <<
189 <<
190 interrupt-parent = <&t <<
191 interrupts = <21 IRQ_T <<
192 <<
193 en-gpios = <&tlmm 20 G <<
194 wake-gpios = <&tlmm 49 <<
195 <<
196 clocks = <&rpmcc RPM_S <<
197 <<
198 pinctrl-names = "defau <<
199 pinctrl-0 = <&nfc_defa <<
200 }; <<
201 }; <<
202 <<
203 vibrator: vibrator { <<
204 compatible = "pwm-vibrator"; <<
205 <<
206 pwms = <&clk_pwm 0 100000>; <<
207 pwm-names = "enable"; <<
208 <<
209 vcc-supply = <®_motor_vdd>; <<
210 status = "disabled"; <<
211 }; <<
212 }; <<
213 <<
214 &blsp_i2c1 { <<
215 status = "okay"; <<
216 <<
217 speaker_codec: audio-codec@34 { <<
218 compatible = "nxp,tfa9895"; <<
219 reg = <0x34>; <<
220 vddd-supply = <&pm8916_l5>; <<
221 sound-name-prefix = "Speaker"; <<
222 #sound-dai-cells = <0>; <<
223 }; <<
224 }; 98 };
225 99
226 &blsp_i2c2 { 100 &blsp_i2c2 {
227 status = "okay"; 101 status = "okay";
228 102
229 accelerometer: accelerometer@10 { 103 accelerometer: accelerometer@10 {
230 compatible = "bosch,bmc150_acc 104 compatible = "bosch,bmc150_accel";
231 reg = <0x10>; 105 reg = <0x10>;
232 interrupt-parent = <&tlmm>; !! 106 interrupt-parent = <&msmgpio>;
233 interrupts = <115 IRQ_TYPE_EDG 107 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
234 108
235 vdd-supply = <&pm8916_l17>; 109 vdd-supply = <&pm8916_l17>;
236 vddio-supply = <&pm8916_l5>; 110 vddio-supply = <&pm8916_l5>;
237 111
238 pinctrl-names = "default"; 112 pinctrl-names = "default";
239 pinctrl-0 = <&accel_int_defaul 113 pinctrl-0 = <&accel_int_default>;
240 }; 114 };
241 115
242 magnetometer@12 { 116 magnetometer@12 {
243 compatible = "bosch,bmc150_mag 117 compatible = "bosch,bmc150_magn";
244 reg = <0x12>; 118 reg = <0x12>;
245 119
246 vdd-supply = <&pm8916_l17>; 120 vdd-supply = <&pm8916_l17>;
247 vddio-supply = <&pm8916_l5>; 121 vddio-supply = <&pm8916_l5>;
248 }; 122 };
249 }; 123 };
250 124
251 &blsp_i2c4 { !! 125 &blsp1_uart2 {
252 status = "okay"; 126 status = "okay";
253 <<
254 fuel-gauge@35 { <<
255 compatible = "richtek,rt5033-b <<
256 reg = <0x35>; <<
257 interrupt-parent = <&tlmm>; <<
258 interrupts = <121 IRQ_TYPE_EDG <<
259 <<
260 pinctrl-names = "default"; <<
261 pinctrl-0 = <&fg_alert_default <<
262 <<
263 power-supplies = <&charger>; <<
264 }; <<
265 }; 127 };
266 128
267 &blsp_i2c6 { !! 129 &dsi0 {
268 status = "okay"; <<
269 <<
270 pmic@34 { <<
271 compatible = "richtek,rt5033"; <<
272 reg = <0x34>; <<
273 <<
274 interrupts-extended = <&tlmm 6 <<
275 <<
276 pinctrl-0 = <&pmic_int_default <<
277 pinctrl-names = "default"; <<
278 <<
279 regulators { <<
280 rt5033_reg_safe_ldo: S <<
281 regulator-min- <<
282 regulator-max- <<
283 regulator-alwa <<
284 }; <<
285 <<
286 /* <<
287 * Needed for camera, <<
288 * Define empty nodes <<
289 * regulators. <<
290 */ <<
291 LDO {}; <<
292 BUCK {}; <<
293 }; <<
294 <<
295 charger: charger { <<
296 compatible = "richtek, <<
297 monitored-battery = <& <<
298 richtek,usb-connector <<
299 }; <<
300 }; <<
301 }; <<
302 <<
303 &blsp_uart2 { <<
304 status = "okay"; <<
305 }; <<
306 <<
307 &gpu { <<
308 status = "okay"; <<
309 }; <<
310 <<
311 /* <<
312 * For some reason the speaker amplifier is co <<
313 * (MI2S_2_D1) instead of the first (MI2S_2_D0 <<
314 * device tree, otherwise audio will seemingly <<
315 * but the speaker stays silent. <<
316 * <<
317 * When routing audio via QDSP6 (the default) <<
318 * the definitions from &q6afedai are used. Wh <<
319 * be alternatively routed directly to the LPA <<
320 * The definitions for &lpass are here for com <<
321 * setup with minor changes to the DT (either <<
322 */ <<
323 &lpass { <<
324 dai-link@3 { <<
325 reg = <MI2S_QUATERNARY>; <<
326 qcom,playback-sd-lines = <1>; <<
327 }; <<
328 }; <<
329 <<
330 &mdss { <<
331 status = "okay"; <<
332 }; <<
333 <<
334 &mdss_dsi0 { <<
335 pinctrl-names = "default", "sleep"; 130 pinctrl-names = "default", "sleep";
336 pinctrl-0 = <&mdss_default>; 131 pinctrl-0 = <&mdss_default>;
337 pinctrl-1 = <&mdss_sleep>; 132 pinctrl-1 = <&mdss_sleep>;
338 }; 133 };
339 134
340 &mpss_mem { !! 135 &mdss {
341 reg = <0x0 0x86800000 0x0 0x5400000>; !! 136 status = "okay";
342 }; 137 };
343 138
344 &pm8916_resin { 139 &pm8916_resin {
345 status = "okay"; 140 status = "okay";
346 linux,code = <KEY_VOLUMEDOWN>; 141 linux,code = <KEY_VOLUMEDOWN>;
347 }; 142 };
348 143
349 &pm8916_rpm_regulators { !! 144 &pronto {
350 pm8916_l17: l17 { <<
351 regulator-min-microvolt = <285 <<
352 regulator-max-microvolt = <285 <<
353 }; <<
354 }; <<
355 <<
356 &q6afedai { <<
357 dai@22 { <<
358 reg = <QUATERNARY_MI2S_RX>; <<
359 qcom,sd-lines = <1>; <<
360 }; <<
361 }; <<
362 <<
363 &sdhc_1 { <<
364 status = "okay"; 145 status = "okay";
365 }; 146 };
366 147
367 &sdhc_2 { !! 148 &sdhc_1 {
368 status = "okay"; 149 status = "okay";
369 150
370 pinctrl-names = "default", "sleep"; 151 pinctrl-names = "default", "sleep";
371 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 152 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 153 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
373 <<
374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; <<
375 }; 154 };
376 155
377 &sound { !! 156 &sdhc_2 {
378 model = "samsung-a2015"; !! 157 status = "okay";
379 audio-routing = <<
380 "AMIC1", "MIC BIAS External1", <<
381 "AMIC2", "MIC BIAS Internal2", <<
382 "AMIC3", "MIC BIAS External1"; <<
383 158
384 pinctrl-0 = <&cdc_pdm_default &sec_mi2 <<
385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ <<
386 pinctrl-names = "default", "sleep"; 159 pinctrl-names = "default", "sleep";
>> 160 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>> 161 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
387 162
388 sound_link_backend2: backend2-dai-link !! 163 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
389 link-name = "Quaternary MI2S"; <<
390 <<
391 cpu { <<
392 sound-dai = <&q6afedai <<
393 }; <<
394 platform { <<
395 sound-dai = <&q6routin <<
396 }; <<
397 codec { <<
398 sound-dai = <&speaker_ <<
399 }; <<
400 }; <<
401 }; 164 };
402 165
403 &usb { 166 &usb {
404 status = "okay"; 167 status = "okay";
405 extcon = <&muic>, <&muic>; 168 extcon = <&muic>, <&muic>;
406 }; 169 };
407 170
408 &usb_hs_phy { 171 &usb_hs_phy {
409 extcon = <&muic>; 172 extcon = <&muic>;
410 }; 173 };
411 174
412 &venus { !! 175 &smd_rpm_regulators {
413 status = "okay"; !! 176 vdd_l1_l2_l3-supply = <&pm8916_s3>;
414 }; !! 177 vdd_l4_l5_l6-supply = <&pm8916_s4>;
415 !! 178 vdd_l7-supply = <&pm8916_s4>;
416 &venus_mem { <<
417 status = "okay"; <<
418 }; <<
419 179
420 &tlmm { !! 180 s3 {
421 accel_int_default: accel-int-default-s !! 181 regulator-min-microvolt = <1200000>;
422 pins = "gpio115"; !! 182 regulator-max-microvolt = <1300000>;
423 function = "gpio"; <<
424 <<
425 drive-strength = <2>; <<
426 bias-disable; <<
427 }; 183 };
428 184
429 fg_alert_default: fg-alert-default-sta !! 185 s4 {
430 pins = "gpio121"; !! 186 regulator-min-microvolt = <1800000>;
431 function = "gpio"; !! 187 regulator-max-microvolt = <2100000>;
432 <<
433 drive-strength = <2>; <<
434 bias-disable; <<
435 }; 188 };
436 189
437 gpio_keys_default: gpio-keys-default-s !! 190 l1 {
438 pins = "gpio107", "gpio109"; !! 191 regulator-min-microvolt = <1225000>;
439 function = "gpio"; !! 192 regulator-max-microvolt = <1225000>;
440 <<
441 drive-strength = <2>; <<
442 bias-pull-up; <<
443 }; 193 };
444 194
445 gpio_hall_sensor_default: gpio-hall-se !! 195 l2 {
446 pins = "gpio52"; !! 196 regulator-min-microvolt = <1200000>;
447 function = "gpio"; !! 197 regulator-max-microvolt = <1200000>;
>> 198 };
448 199
449 drive-strength = <2>; !! 200 l4 {
450 bias-disable; !! 201 regulator-min-microvolt = <2050000>;
>> 202 regulator-max-microvolt = <2050000>;
451 }; 203 };
452 204
453 mdss_default: mdss-default-state { !! 205 l5 {
454 pins = "gpio25"; !! 206 regulator-min-microvolt = <1800000>;
455 function = "gpio"; !! 207 regulator-max-microvolt = <1800000>;
>> 208 };
456 209
457 drive-strength = <8>; !! 210 l6 {
458 bias-disable; !! 211 regulator-min-microvolt = <1800000>;
>> 212 regulator-max-microvolt = <1800000>;
459 }; 213 };
460 mdss_sleep: mdss-sleep-state { <<
461 pins = "gpio25"; <<
462 function = "gpio"; <<
463 214
464 drive-strength = <2>; !! 215 l7 {
465 bias-pull-down; !! 216 regulator-min-microvolt = <1800000>;
>> 217 regulator-max-microvolt = <1800000>;
466 }; 218 };
467 219
468 motor_en_default: motor-en-default-sta !! 220 l8 {
469 pins = "gpio76"; !! 221 regulator-min-microvolt = <2850000>;
470 function = "gpio"; !! 222 regulator-max-microvolt = <2900000>;
>> 223 };
471 224
472 drive-strength = <2>; !! 225 l9 {
473 bias-disable; !! 226 regulator-min-microvolt = <3300000>;
>> 227 regulator-max-microvolt = <3300000>;
474 }; 228 };
475 229
476 motor_pwm_default: motor-pwm-default-s !! 230 l10 {
477 pins = "gpio50"; !! 231 regulator-min-microvolt = <2700000>;
478 function = "gcc_gp2_clk_a"; !! 232 regulator-max-microvolt = <2800000>;
479 }; 233 };
480 234
481 muic_i2c_default: muic-i2c-default-sta !! 235 l11 {
482 pins = "gpio105", "gpio106"; !! 236 regulator-min-microvolt = <1800000>;
483 function = "gpio"; !! 237 regulator-max-microvolt = <2950000>;
>> 238 regulator-allow-set-load;
>> 239 regulator-system-load = <200000>;
>> 240 };
484 241
485 drive-strength = <2>; !! 242 l12 {
486 bias-disable; !! 243 regulator-min-microvolt = <1800000>;
>> 244 regulator-max-microvolt = <2950000>;
487 }; 245 };
488 246
489 muic_int_default: muic-int-default-sta !! 247 l13 {
490 pins = "gpio12"; !! 248 regulator-min-microvolt = <3075000>;
491 function = "gpio"; !! 249 regulator-max-microvolt = <3075000>;
>> 250 };
492 251
493 drive-strength = <2>; !! 252 l14 {
494 bias-disable; !! 253 regulator-min-microvolt = <1800000>;
>> 254 regulator-max-microvolt = <3300000>;
495 }; 255 };
496 256
497 nfc_default: nfc-default-state { !! 257 l15 {
498 nfc-pins { !! 258 regulator-min-microvolt = <1800000>;
499 pins = "gpio20", "gpio !! 259 regulator-max-microvolt = <3300000>;
500 function = "gpio"; !! 260 };
501 261
502 drive-strength = <2>; !! 262 l16 {
503 bias-disable; !! 263 regulator-min-microvolt = <1800000>;
504 }; !! 264 regulator-max-microvolt = <3300000>;
>> 265 };
505 266
506 irq-pins { !! 267 l17 {
507 pins = "gpio21"; !! 268 regulator-min-microvolt = <2850000>;
508 function = "gpio"; !! 269 regulator-max-microvolt = <2850000>;
>> 270 };
509 271
510 drive-strength = <2>; !! 272 l18 {
511 bias-pull-down; !! 273 regulator-min-microvolt = <2700000>;
512 }; !! 274 regulator-max-microvolt = <2700000>;
513 }; 275 };
>> 276 };
514 277
515 nfc_i2c_default: nfc-i2c-default-state !! 278 &msmgpio {
516 pins = "gpio0", "gpio1"; !! 279 accel_int_default: accel-int-default {
>> 280 pins = "gpio115";
517 function = "gpio"; 281 function = "gpio";
518 282
519 drive-strength = <2>; 283 drive-strength = <2>;
520 bias-disable; 284 bias-disable;
521 }; 285 };
522 286
523 pmic_int_default: pmic-int-default-sta !! 287 gpio_keys_default: gpio-keys-default {
524 pins = "gpio62"; !! 288 pins = "gpio107", "gpio109";
525 function = "gpio"; 289 function = "gpio";
526 drive-strength = <2>; <<
527 bias-disable; <<
528 }; <<
529 290
530 sdc2_cd_default: sdc2-cd-default-state <<
531 pins = "gpio38"; <<
532 function = "gpio"; <<
533 drive-strength = <2>; 291 drive-strength = <2>;
534 bias-disable; !! 292 bias-pull-up;
535 }; 293 };
536 294
537 tkey_default: tkey-default-state { !! 295 gpio_hall_sensor_default: gpio-hall-sensor-default {
538 pins = "gpio98"; !! 296 pins = "gpio52";
539 function = "gpio"; 297 function = "gpio";
540 298
541 drive-strength = <2>; 299 drive-strength = <2>;
542 bias-disable; 300 bias-disable;
543 }; 301 };
544 302
545 tkey_i2c_default: tkey-i2c-default-sta !! 303 mdss {
546 pins = "gpio16", "gpio17"; !! 304 mdss_default: mdss-default {
547 function = "gpio"; !! 305 pins = "gpio25";
>> 306 function = "gpio";
548 307
549 drive-strength = <2>; !! 308 drive-strength = <8>;
550 bias-disable; !! 309 bias-disable;
>> 310 };
>> 311 mdss_sleep: mdss-sleep {
>> 312 pins = "gpio25";
>> 313 function = "gpio";
>> 314
>> 315 drive-strength = <2>;
>> 316 bias-pull-down;
>> 317 };
551 }; 318 };
552 319
553 tsp_en_default: tsp-en-default-state { !! 320 muic_i2c_default: muic-i2c-default {
554 pins = "gpio73"; !! 321 pins = "gpio105", "gpio106";
555 function = "gpio"; 322 function = "gpio";
556 323
557 drive-strength = <2>; 324 drive-strength = <2>;
558 bias-disable; 325 bias-disable;
559 }; 326 };
560 327
561 ts_int_default: ts-int-default-state { !! 328 muic_int_default: muic-int-default {
562 pins = "gpio13"; !! 329 pins = "gpio12";
563 function = "gpio"; 330 function = "gpio";
564 331
565 drive-strength = <2>; 332 drive-strength = <2>;
566 bias-disable; 333 bias-disable;
567 }; 334 };
568 }; <<
569 335
570 &pm8916_gpios { !! 336 tsp_en_default: tsp-en-default {
571 nfc_clk_req: nfc-clk-req-state { !! 337 pins = "gpio73";
572 pins = "gpio2"; !! 338 function = "gpio";
573 function = "func1"; <<
574 339
575 input-enable; !! 340 drive-strength = <2>;
576 bias-disable; 341 bias-disable;
577 power-source = <PM8916_GPIO_L2 <<
578 }; 342 };
579 }; 343 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.