1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 #include "msm8916-pm8916.dtsi" 3 #include "msm8916-pm8916.dtsi"
4 #include "msm8916-modem-qdsp6.dtsi" <<
5 <<
6 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq 6 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/sound/apq8016-lpass.h> <<
11 8
12 / { 9 / {
13 aliases { 10 aliases {
14 mmc0 = &sdhc_1; /* eMMC */ !! 11 serial0 = &blsp1_uart2;
15 mmc1 = &sdhc_2; /* SD card */ <<
16 serial0 = &blsp_uart2; <<
17 }; 12 };
18 13
19 chosen { 14 chosen {
20 stdout-path = "serial0"; 15 stdout-path = "serial0";
21 }; 16 };
22 17
23 reserved-memory { 18 reserved-memory {
24 /* Additional memory used by S 19 /* Additional memory used by Samsung firmware modifications */
25 tz-apps@85500000 { 20 tz-apps@85500000 {
26 reg = <0x0 0x85500000 21 reg = <0x0 0x85500000 0x0 0xb00000>;
27 no-map; 22 no-map;
28 }; 23 };
29 }; 24 };
30 25
31 battery: battery { <<
32 compatible = "simple-battery"; <<
33 precharge-current-microamp = < <<
34 precharge-upper-limit-microvol <<
35 }; <<
36 <<
37 clk_pwm: pwm { <<
38 compatible = "clk-pwm"; <<
39 #pwm-cells = <2>; <<
40 <<
41 clocks = <&gcc GCC_GP2_CLK>; <<
42 <<
43 pinctrl-names = "default"; <<
44 pinctrl-0 = <&motor_pwm_defaul <<
45 status = "disabled"; <<
46 }; <<
47 <<
48 gpio-keys { 26 gpio-keys {
49 compatible = "gpio-keys"; 27 compatible = "gpio-keys";
50 28
51 pinctrl-names = "default"; 29 pinctrl-names = "default";
52 pinctrl-0 = <&gpio_keys_defaul 30 pinctrl-0 = <&gpio_keys_default>;
53 31
54 label = "GPIO Buttons"; 32 label = "GPIO Buttons";
55 33
56 button-volume-up { 34 button-volume-up {
57 label = "Volume Up"; 35 label = "Volume Up";
58 gpios = <&tlmm 107 GPI !! 36 gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_VOLU 37 linux,code = <KEY_VOLUMEUP>;
60 }; 38 };
61 39
62 button-home { 40 button-home {
63 label = "Home"; 41 label = "Home";
64 gpios = <&tlmm 109 GPI !! 42 gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_HOME 43 linux,code = <KEY_HOMEPAGE>;
66 }; 44 };
67 }; 45 };
68 46
69 gpio-hall-sensor { 47 gpio-hall-sensor {
70 compatible = "gpio-keys"; 48 compatible = "gpio-keys";
71 49
72 pinctrl-names = "default"; 50 pinctrl-names = "default";
73 pinctrl-0 = <&gpio_hall_sensor 51 pinctrl-0 = <&gpio_hall_sensor_default>;
74 52
75 label = "GPIO Hall Effect Sens 53 label = "GPIO Hall Effect Sensor";
76 54
77 event-hall-sensor { 55 event-hall-sensor {
78 label = "Hall Effect S 56 label = "Hall Effect Sensor";
79 gpios = <&tlmm 52 GPIO !! 57 gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
80 linux,input-type = <EV 58 linux,input-type = <EV_SW>;
81 linux,code = <SW_LID>; 59 linux,code = <SW_LID>;
82 linux,can-disable; 60 linux,can-disable;
83 }; 61 };
84 }; 62 };
85 63
86 /* <<
87 * NOTE: A5 connects GPIO 76 to a regl <<
88 * driver IC but A3 connects the same <<
89 * the driver. <<
90 */ <<
91 reg_motor_vdd: regulator-motor-vdd { <<
92 compatible = "regulator-fixed" <<
93 regulator-name = "motor_vdd"; <<
94 regulator-min-microvolt = <300 <<
95 regulator-max-microvolt = <300 <<
96 <<
97 gpio = <&tlmm 76 GPIO_ACTIVE_H <<
98 enable-active-high; <<
99 <<
100 pinctrl-names = "default"; <<
101 pinctrl-0 = <&motor_en_default <<
102 }; <<
103 <<
104 reg_vdd_tsp_a: regulator-vdd-tsp-a { 64 reg_vdd_tsp_a: regulator-vdd-tsp-a {
105 compatible = "regulator-fixed" 65 compatible = "regulator-fixed";
106 regulator-name = "vdd_tsp_a"; 66 regulator-name = "vdd_tsp_a";
107 regulator-min-microvolt = <330 67 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <330 68 regulator-max-microvolt = <3300000>;
109 69
110 gpio = <&tlmm 73 GPIO_ACTIVE_H !! 70 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
111 enable-active-high; 71 enable-active-high;
112 72
113 pinctrl-names = "default"; 73 pinctrl-names = "default";
114 pinctrl-0 = <&tsp_en_default>; 74 pinctrl-0 = <&tsp_en_default>;
115 }; 75 };
116 76
117 i2c-muic { 77 i2c-muic {
118 compatible = "i2c-gpio"; 78 compatible = "i2c-gpio";
119 sda-gpios = <&tlmm 105 (GPIO_A !! 79 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
120 scl-gpios = <&tlmm 106 (GPIO_A !! 80 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
121 81
122 pinctrl-names = "default"; 82 pinctrl-names = "default";
123 pinctrl-0 = <&muic_i2c_default 83 pinctrl-0 = <&muic_i2c_default>;
124 84
125 #address-cells = <1>; 85 #address-cells = <1>;
126 #size-cells = <0>; 86 #size-cells = <0>;
127 87
128 muic: extcon@25 { 88 muic: extcon@25 {
129 compatible = "siliconm 89 compatible = "siliconmitus,sm5502-muic";
130 90
131 reg = <0x25>; 91 reg = <0x25>;
132 interrupt-parent = <&t !! 92 interrupt-parent = <&msmgpio>;
133 interrupts = <12 IRQ_T 93 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
134 94
135 pinctrl-names = "defau 95 pinctrl-names = "default";
136 pinctrl-0 = <&muic_int 96 pinctrl-0 = <&muic_int_default>;
137 <<
138 usb_con: connector { <<
139 compatible = " <<
140 label = "micro <<
141 type = "micro" <<
142 }; <<
143 }; 97 };
144 }; 98 };
145 99
146 i2c-tkey { 100 i2c-tkey {
147 compatible = "i2c-gpio"; 101 compatible = "i2c-gpio";
148 sda-gpios = <&tlmm 16 (GPIO_AC !! 102 sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
149 scl-gpios = <&tlmm 17 (GPIO_AC !! 103 scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
150 104
151 pinctrl-names = "default"; 105 pinctrl-names = "default";
152 pinctrl-0 = <&tkey_i2c_default 106 pinctrl-0 = <&tkey_i2c_default>;
153 107
154 #address-cells = <1>; 108 #address-cells = <1>;
155 #size-cells = <0>; 109 #size-cells = <0>;
156 110
157 touchkey: touchkey@20 { 111 touchkey: touchkey@20 {
158 /* Note: Actually an A 112 /* Note: Actually an ABOV MCU that implements same interface */
159 compatible = "corerive 113 compatible = "coreriver,tc360-touchkey";
160 reg = <0x20>; 114 reg = <0x20>;
161 115
162 interrupt-parent = <&t !! 116 interrupt-parent = <&msmgpio>;
163 interrupts = <98 IRQ_T 117 interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
164 118
165 /* vcc/vdd-supply are 119 /* vcc/vdd-supply are board-specific */
166 vddio-supply = <&pm891 120 vddio-supply = <&pm8916_l6>;
167 121
168 linux,keycodes = <KEY_ 122 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
169 123
170 pinctrl-names = "defau 124 pinctrl-names = "default";
171 pinctrl-0 = <&tkey_def 125 pinctrl-0 = <&tkey_default>;
172 }; 126 };
173 }; 127 };
174 128
175 i2c-nfc { 129 i2c-nfc {
176 compatible = "i2c-gpio"; 130 compatible = "i2c-gpio";
177 sda-gpios = <&tlmm 0 (GPIO_ACT !! 131 sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
178 scl-gpios = <&tlmm 1 (GPIO_ACT !! 132 scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
179 133
180 pinctrl-names = "default"; 134 pinctrl-names = "default";
181 pinctrl-0 = <&nfc_i2c_default> 135 pinctrl-0 = <&nfc_i2c_default>;
182 136
183 #address-cells = <1>; 137 #address-cells = <1>;
184 #size-cells = <0>; 138 #size-cells = <0>;
185 139
186 nfc@27 { 140 nfc@27 {
187 compatible = "samsung, 141 compatible = "samsung,s3fwrn5-i2c";
188 reg = <0x27>; 142 reg = <0x27>;
189 143
190 interrupt-parent = <&t !! 144 interrupt-parent = <&msmgpio>;
191 interrupts = <21 IRQ_T 145 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
192 146
193 en-gpios = <&tlmm 20 G !! 147 en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
194 wake-gpios = <&tlmm 49 !! 148 wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
195 149
196 clocks = <&rpmcc RPM_S 150 clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
197 151
198 pinctrl-names = "defau 152 pinctrl-names = "default";
199 pinctrl-0 = <&nfc_defa 153 pinctrl-0 = <&nfc_default &nfc_clk_req>;
200 }; 154 };
201 }; 155 };
202 <<
203 vibrator: vibrator { <<
204 compatible = "pwm-vibrator"; <<
205 <<
206 pwms = <&clk_pwm 0 100000>; <<
207 pwm-names = "enable"; <<
208 <<
209 vcc-supply = <®_motor_vdd>; <<
210 status = "disabled"; <<
211 }; <<
212 }; <<
213 <<
214 &blsp_i2c1 { <<
215 status = "okay"; <<
216 <<
217 speaker_codec: audio-codec@34 { <<
218 compatible = "nxp,tfa9895"; <<
219 reg = <0x34>; <<
220 vddd-supply = <&pm8916_l5>; <<
221 sound-name-prefix = "Speaker"; <<
222 #sound-dai-cells = <0>; <<
223 }; <<
224 }; 156 };
225 157
226 &blsp_i2c2 { 158 &blsp_i2c2 {
227 status = "okay"; 159 status = "okay";
228 160
229 accelerometer: accelerometer@10 { 161 accelerometer: accelerometer@10 {
230 compatible = "bosch,bmc150_acc 162 compatible = "bosch,bmc150_accel";
231 reg = <0x10>; 163 reg = <0x10>;
232 interrupt-parent = <&tlmm>; !! 164 interrupt-parent = <&msmgpio>;
233 interrupts = <115 IRQ_TYPE_EDG 165 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
234 166
235 vdd-supply = <&pm8916_l17>; 167 vdd-supply = <&pm8916_l17>;
236 vddio-supply = <&pm8916_l5>; 168 vddio-supply = <&pm8916_l5>;
237 169
238 pinctrl-names = "default"; 170 pinctrl-names = "default";
239 pinctrl-0 = <&accel_int_defaul 171 pinctrl-0 = <&accel_int_default>;
240 }; 172 };
241 173
242 magnetometer@12 { 174 magnetometer@12 {
243 compatible = "bosch,bmc150_mag 175 compatible = "bosch,bmc150_magn";
244 reg = <0x12>; 176 reg = <0x12>;
245 177
246 vdd-supply = <&pm8916_l17>; 178 vdd-supply = <&pm8916_l17>;
247 vddio-supply = <&pm8916_l5>; 179 vddio-supply = <&pm8916_l5>;
248 }; 180 };
249 }; 181 };
250 182
251 &blsp_i2c4 { 183 &blsp_i2c4 {
252 status = "okay"; 184 status = "okay";
253 185
254 fuel-gauge@35 { !! 186 battery@35 {
255 compatible = "richtek,rt5033-b 187 compatible = "richtek,rt5033-battery";
256 reg = <0x35>; 188 reg = <0x35>;
257 interrupt-parent = <&tlmm>; !! 189 interrupt-parent = <&msmgpio>;
258 interrupts = <121 IRQ_TYPE_EDG 190 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
259 191
260 pinctrl-names = "default"; 192 pinctrl-names = "default";
261 pinctrl-0 = <&fg_alert_default 193 pinctrl-0 = <&fg_alert_default>;
262 <<
263 power-supplies = <&charger>; <<
264 }; <<
265 }; <<
266 <<
267 &blsp_i2c6 { <<
268 status = "okay"; <<
269 <<
270 pmic@34 { <<
271 compatible = "richtek,rt5033"; <<
272 reg = <0x34>; <<
273 <<
274 interrupts-extended = <&tlmm 6 <<
275 <<
276 pinctrl-0 = <&pmic_int_default <<
277 pinctrl-names = "default"; <<
278 <<
279 regulators { <<
280 rt5033_reg_safe_ldo: S <<
281 regulator-min- <<
282 regulator-max- <<
283 regulator-alwa <<
284 }; <<
285 <<
286 /* <<
287 * Needed for camera, <<
288 * Define empty nodes <<
289 * regulators. <<
290 */ <<
291 LDO {}; <<
292 BUCK {}; <<
293 }; <<
294 <<
295 charger: charger { <<
296 compatible = "richtek, <<
297 monitored-battery = <& <<
298 richtek,usb-connector <<
299 }; <<
300 }; 194 };
301 }; 195 };
302 196
303 &blsp_uart2 { !! 197 &blsp1_uart2 {
304 status = "okay"; 198 status = "okay";
305 }; 199 };
306 200
307 &gpu { !! 201 &dsi0 {
308 status = "okay"; <<
309 }; <<
310 <<
311 /* <<
312 * For some reason the speaker amplifier is co <<
313 * (MI2S_2_D1) instead of the first (MI2S_2_D0 <<
314 * device tree, otherwise audio will seemingly <<
315 * but the speaker stays silent. <<
316 * <<
317 * When routing audio via QDSP6 (the default) <<
318 * the definitions from &q6afedai are used. Wh <<
319 * be alternatively routed directly to the LPA <<
320 * The definitions for &lpass are here for com <<
321 * setup with minor changes to the DT (either <<
322 */ <<
323 &lpass { <<
324 dai-link@3 { <<
325 reg = <MI2S_QUATERNARY>; <<
326 qcom,playback-sd-lines = <1>; <<
327 }; <<
328 }; <<
329 <<
330 &mdss { <<
331 status = "okay"; <<
332 }; <<
333 <<
334 &mdss_dsi0 { <<
335 pinctrl-names = "default", "sleep"; 202 pinctrl-names = "default", "sleep";
336 pinctrl-0 = <&mdss_default>; 203 pinctrl-0 = <&mdss_default>;
337 pinctrl-1 = <&mdss_sleep>; 204 pinctrl-1 = <&mdss_sleep>;
338 }; 205 };
339 206
340 &mpss_mem { !! 207 &mdss {
341 reg = <0x0 0x86800000 0x0 0x5400000>; !! 208 status = "okay";
342 }; 209 };
343 210
344 &pm8916_resin { 211 &pm8916_resin {
345 status = "okay"; 212 status = "okay";
346 linux,code = <KEY_VOLUMEDOWN>; 213 linux,code = <KEY_VOLUMEDOWN>;
347 }; 214 };
348 215
349 &pm8916_rpm_regulators { !! 216 &pronto {
350 pm8916_l17: l17 { <<
351 regulator-min-microvolt = <285 <<
352 regulator-max-microvolt = <285 <<
353 }; <<
354 }; <<
355 <<
356 &q6afedai { <<
357 dai@22 { <<
358 reg = <QUATERNARY_MI2S_RX>; <<
359 qcom,sd-lines = <1>; <<
360 }; <<
361 }; <<
362 <<
363 &sdhc_1 { <<
364 status = "okay"; 217 status = "okay";
365 }; 218 };
366 219
367 &sdhc_2 { !! 220 &sdhc_1 {
368 status = "okay"; 221 status = "okay";
369 222
370 pinctrl-names = "default", "sleep"; 223 pinctrl-names = "default", "sleep";
371 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 224 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 225 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
373 <<
374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; <<
375 }; 226 };
376 227
377 &sound { !! 228 &sdhc_2 {
378 model = "samsung-a2015"; !! 229 status = "okay";
379 audio-routing = <<
380 "AMIC1", "MIC BIAS External1", <<
381 "AMIC2", "MIC BIAS Internal2", <<
382 "AMIC3", "MIC BIAS External1"; <<
383 230
384 pinctrl-0 = <&cdc_pdm_default &sec_mi2 <<
385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ <<
386 pinctrl-names = "default", "sleep"; 231 pinctrl-names = "default", "sleep";
>> 232 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>> 233 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
387 234
388 sound_link_backend2: backend2-dai-link !! 235 cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
389 link-name = "Quaternary MI2S"; <<
390 <<
391 cpu { <<
392 sound-dai = <&q6afedai <<
393 }; <<
394 platform { <<
395 sound-dai = <&q6routin <<
396 }; <<
397 codec { <<
398 sound-dai = <&speaker_ <<
399 }; <<
400 }; <<
401 }; 236 };
402 237
403 &usb { 238 &usb {
404 status = "okay"; 239 status = "okay";
405 extcon = <&muic>, <&muic>; 240 extcon = <&muic>, <&muic>;
406 }; 241 };
407 242
408 &usb_hs_phy { 243 &usb_hs_phy {
409 extcon = <&muic>; 244 extcon = <&muic>;
410 }; 245 };
411 246
412 &venus { !! 247 &smd_rpm_regulators {
413 status = "okay"; !! 248 vdd_l1_l2_l3-supply = <&pm8916_s3>;
414 }; !! 249 vdd_l4_l5_l6-supply = <&pm8916_s4>;
>> 250 vdd_l7-supply = <&pm8916_s4>;
415 251
416 &venus_mem { !! 252 s3 {
417 status = "okay"; !! 253 regulator-min-microvolt = <1200000>;
>> 254 regulator-max-microvolt = <1300000>;
>> 255 };
>> 256
>> 257 s4 {
>> 258 regulator-min-microvolt = <1800000>;
>> 259 regulator-max-microvolt = <2100000>;
>> 260 };
>> 261
>> 262 l1 {
>> 263 regulator-min-microvolt = <1225000>;
>> 264 regulator-max-microvolt = <1225000>;
>> 265 };
>> 266
>> 267 l2 {
>> 268 regulator-min-microvolt = <1200000>;
>> 269 regulator-max-microvolt = <1200000>;
>> 270 };
>> 271
>> 272 l4 {
>> 273 regulator-min-microvolt = <2050000>;
>> 274 regulator-max-microvolt = <2050000>;
>> 275 };
>> 276
>> 277 l5 {
>> 278 regulator-min-microvolt = <1800000>;
>> 279 regulator-max-microvolt = <1800000>;
>> 280 };
>> 281
>> 282 l6 {
>> 283 regulator-min-microvolt = <1800000>;
>> 284 regulator-max-microvolt = <1800000>;
>> 285 };
>> 286
>> 287 l7 {
>> 288 regulator-min-microvolt = <1800000>;
>> 289 regulator-max-microvolt = <1800000>;
>> 290 };
>> 291
>> 292 l8 {
>> 293 regulator-min-microvolt = <2850000>;
>> 294 regulator-max-microvolt = <2900000>;
>> 295 };
>> 296
>> 297 l9 {
>> 298 regulator-min-microvolt = <3300000>;
>> 299 regulator-max-microvolt = <3300000>;
>> 300 };
>> 301
>> 302 l10 {
>> 303 regulator-min-microvolt = <2700000>;
>> 304 regulator-max-microvolt = <2800000>;
>> 305 };
>> 306
>> 307 l11 {
>> 308 regulator-min-microvolt = <1800000>;
>> 309 regulator-max-microvolt = <2950000>;
>> 310 regulator-allow-set-load;
>> 311 regulator-system-load = <200000>;
>> 312 };
>> 313
>> 314 l12 {
>> 315 regulator-min-microvolt = <1800000>;
>> 316 regulator-max-microvolt = <2950000>;
>> 317 };
>> 318
>> 319 l13 {
>> 320 regulator-min-microvolt = <3075000>;
>> 321 regulator-max-microvolt = <3075000>;
>> 322 };
>> 323
>> 324 l14 {
>> 325 regulator-min-microvolt = <1800000>;
>> 326 regulator-max-microvolt = <3300000>;
>> 327 };
>> 328
>> 329 l15 {
>> 330 regulator-min-microvolt = <1800000>;
>> 331 regulator-max-microvolt = <3300000>;
>> 332 };
>> 333
>> 334 l16 {
>> 335 regulator-min-microvolt = <1800000>;
>> 336 regulator-max-microvolt = <3300000>;
>> 337 };
>> 338
>> 339 l17 {
>> 340 regulator-min-microvolt = <2850000>;
>> 341 regulator-max-microvolt = <2850000>;
>> 342 };
>> 343
>> 344 l18 {
>> 345 regulator-min-microvolt = <2700000>;
>> 346 regulator-max-microvolt = <2700000>;
>> 347 };
418 }; 348 };
419 349
420 &tlmm { !! 350 &msmgpio {
421 accel_int_default: accel-int-default-s !! 351 accel_int_default: accel-int-default {
422 pins = "gpio115"; 352 pins = "gpio115";
423 function = "gpio"; 353 function = "gpio";
424 354
425 drive-strength = <2>; 355 drive-strength = <2>;
426 bias-disable; 356 bias-disable;
427 }; 357 };
428 358
429 fg_alert_default: fg-alert-default-sta !! 359 fg_alert_default: fg-alert-default {
430 pins = "gpio121"; 360 pins = "gpio121";
431 function = "gpio"; 361 function = "gpio";
432 362
433 drive-strength = <2>; 363 drive-strength = <2>;
434 bias-disable; 364 bias-disable;
435 }; 365 };
436 366
437 gpio_keys_default: gpio-keys-default-s !! 367 gpio_keys_default: gpio-keys-default {
438 pins = "gpio107", "gpio109"; 368 pins = "gpio107", "gpio109";
439 function = "gpio"; 369 function = "gpio";
440 370
441 drive-strength = <2>; 371 drive-strength = <2>;
442 bias-pull-up; 372 bias-pull-up;
443 }; 373 };
444 374
445 gpio_hall_sensor_default: gpio-hall-se !! 375 gpio_hall_sensor_default: gpio-hall-sensor-default {
446 pins = "gpio52"; 376 pins = "gpio52";
447 function = "gpio"; 377 function = "gpio";
448 378
449 drive-strength = <2>; 379 drive-strength = <2>;
450 bias-disable; 380 bias-disable;
451 }; 381 };
452 382
453 mdss_default: mdss-default-state { !! 383 mdss {
454 pins = "gpio25"; !! 384 mdss_default: mdss-default {
455 function = "gpio"; !! 385 pins = "gpio25";
>> 386 function = "gpio";
456 387
457 drive-strength = <8>; !! 388 drive-strength = <8>;
458 bias-disable; !! 389 bias-disable;
459 }; !! 390 };
460 mdss_sleep: mdss-sleep-state { !! 391 mdss_sleep: mdss-sleep {
461 pins = "gpio25"; !! 392 pins = "gpio25";
462 function = "gpio"; !! 393 function = "gpio";
463 394
464 drive-strength = <2>; !! 395 drive-strength = <2>;
465 bias-pull-down; !! 396 bias-pull-down;
>> 397 };
466 }; 398 };
467 399
468 motor_en_default: motor-en-default-sta !! 400 muic_i2c_default: muic-i2c-default {
469 pins = "gpio76"; !! 401 pins = "gpio105", "gpio106";
470 function = "gpio"; 402 function = "gpio";
471 403
472 drive-strength = <2>; 404 drive-strength = <2>;
473 bias-disable; 405 bias-disable;
474 }; 406 };
475 407
476 motor_pwm_default: motor-pwm-default-s !! 408 muic_int_default: muic-int-default {
477 pins = "gpio50"; !! 409 pins = "gpio12";
478 function = "gcc_gp2_clk_a"; <<
479 }; <<
480 <<
481 muic_i2c_default: muic-i2c-default-sta <<
482 pins = "gpio105", "gpio106"; <<
483 function = "gpio"; 410 function = "gpio";
484 411
485 drive-strength = <2>; 412 drive-strength = <2>;
486 bias-disable; 413 bias-disable;
487 }; 414 };
488 415
489 muic_int_default: muic-int-default-sta !! 416 nfc_default: nfc-default {
490 pins = "gpio12"; !! 417 pins = "gpio20", "gpio49";
491 function = "gpio"; 418 function = "gpio";
492 419
493 drive-strength = <2>; 420 drive-strength = <2>;
494 bias-disable; 421 bias-disable;
495 }; <<
496 <<
497 nfc_default: nfc-default-state { <<
498 nfc-pins { <<
499 pins = "gpio20", "gpio <<
500 function = "gpio"; <<
501 422
502 drive-strength = <2>; !! 423 irq {
503 bias-disable; <<
504 }; <<
505 <<
506 irq-pins { <<
507 pins = "gpio21"; 424 pins = "gpio21";
508 function = "gpio"; 425 function = "gpio";
509 426
510 drive-strength = <2>; 427 drive-strength = <2>;
511 bias-pull-down; 428 bias-pull-down;
512 }; 429 };
513 }; 430 };
514 431
515 nfc_i2c_default: nfc-i2c-default-state !! 432 nfc_i2c_default: nfc-i2c-default {
516 pins = "gpio0", "gpio1"; 433 pins = "gpio0", "gpio1";
517 function = "gpio"; 434 function = "gpio";
518 435
519 drive-strength = <2>; 436 drive-strength = <2>;
520 bias-disable; 437 bias-disable;
521 }; 438 };
522 439
523 pmic_int_default: pmic-int-default-sta !! 440 tkey_default: tkey-default {
524 pins = "gpio62"; <<
525 function = "gpio"; <<
526 drive-strength = <2>; <<
527 bias-disable; <<
528 }; <<
529 <<
530 sdc2_cd_default: sdc2-cd-default-state <<
531 pins = "gpio38"; <<
532 function = "gpio"; <<
533 drive-strength = <2>; <<
534 bias-disable; <<
535 }; <<
536 <<
537 tkey_default: tkey-default-state { <<
538 pins = "gpio98"; 441 pins = "gpio98";
539 function = "gpio"; 442 function = "gpio";
540 443
541 drive-strength = <2>; 444 drive-strength = <2>;
542 bias-disable; 445 bias-disable;
543 }; 446 };
544 447
545 tkey_i2c_default: tkey-i2c-default-sta !! 448 tkey_i2c_default: tkey-i2c-default {
546 pins = "gpio16", "gpio17"; 449 pins = "gpio16", "gpio17";
547 function = "gpio"; 450 function = "gpio";
548 451
549 drive-strength = <2>; 452 drive-strength = <2>;
550 bias-disable; 453 bias-disable;
551 }; 454 };
552 455
553 tsp_en_default: tsp-en-default-state { !! 456 tsp_en_default: tsp-en-default {
554 pins = "gpio73"; 457 pins = "gpio73";
555 function = "gpio"; 458 function = "gpio";
556 459
557 drive-strength = <2>; 460 drive-strength = <2>;
558 bias-disable; 461 bias-disable;
559 }; 462 };
560 463
561 ts_int_default: ts-int-default-state { !! 464 ts_int_default: ts-int-default {
562 pins = "gpio13"; 465 pins = "gpio13";
563 function = "gpio"; 466 function = "gpio";
564 467
565 drive-strength = <2>; 468 drive-strength = <2>;
566 bias-disable; 469 bias-disable;
567 }; 470 };
568 }; 471 };
569 472
570 &pm8916_gpios { 473 &pm8916_gpios {
571 nfc_clk_req: nfc-clk-req-state { 474 nfc_clk_req: nfc-clk-req-state {
572 pins = "gpio2"; 475 pins = "gpio2";
573 function = "func1"; 476 function = "func1";
574 477
575 input-enable; 478 input-enable;
576 bias-disable; 479 bias-disable;
577 power-source = <PM8916_GPIO_L2 480 power-source = <PM8916_GPIO_L2>;
578 }; 481 };
579 }; 482 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.