1 // SPDX-License-Identifier: GPL-2.0-only 1 // SPDX-License-Identifier: GPL-2.0-only
2 2
3 #include "msm8916-pm8916.dtsi" 3 #include "msm8916-pm8916.dtsi"
4 #include "msm8916-modem-qdsp6.dtsi" <<
5 <<
6 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/irq 6 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h 7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/sound/apq8016-lpass.h> <<
11 8
12 / { 9 / {
13 aliases { 10 aliases {
14 mmc0 = &sdhc_1; /* eMMC */ !! 11 serial0 = &blsp1_uart2;
15 mmc1 = &sdhc_2; /* SD card */ <<
16 serial0 = &blsp_uart2; <<
17 }; 12 };
18 13
19 chosen { 14 chosen {
20 stdout-path = "serial0"; 15 stdout-path = "serial0";
21 }; 16 };
22 17
23 reserved-memory { 18 reserved-memory {
24 /* Additional memory used by S 19 /* Additional memory used by Samsung firmware modifications */
25 tz-apps@85500000 { 20 tz-apps@85500000 {
26 reg = <0x0 0x85500000 21 reg = <0x0 0x85500000 0x0 0xb00000>;
27 no-map; 22 no-map;
28 }; 23 };
29 }; 24 };
30 25
31 battery: battery { <<
32 compatible = "simple-battery"; <<
33 precharge-current-microamp = < <<
34 precharge-upper-limit-microvol <<
35 }; <<
36 <<
37 clk_pwm: pwm { 26 clk_pwm: pwm {
38 compatible = "clk-pwm"; 27 compatible = "clk-pwm";
39 #pwm-cells = <2>; 28 #pwm-cells = <2>;
40 29
41 clocks = <&gcc GCC_GP2_CLK>; 30 clocks = <&gcc GCC_GP2_CLK>;
42 31
43 pinctrl-names = "default"; 32 pinctrl-names = "default";
44 pinctrl-0 = <&motor_pwm_defaul 33 pinctrl-0 = <&motor_pwm_default>;
45 status = "disabled"; 34 status = "disabled";
46 }; 35 };
47 36
48 gpio-keys { 37 gpio-keys {
49 compatible = "gpio-keys"; 38 compatible = "gpio-keys";
50 39
51 pinctrl-names = "default"; 40 pinctrl-names = "default";
52 pinctrl-0 = <&gpio_keys_defaul 41 pinctrl-0 = <&gpio_keys_default>;
53 42
54 label = "GPIO Buttons"; 43 label = "GPIO Buttons";
55 44
56 button-volume-up { 45 button-volume-up {
57 label = "Volume Up"; 46 label = "Volume Up";
58 gpios = <&tlmm 107 GPI 47 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_VOLU 48 linux,code = <KEY_VOLUMEUP>;
60 }; 49 };
61 50
62 button-home { 51 button-home {
63 label = "Home"; 52 label = "Home";
64 gpios = <&tlmm 109 GPI 53 gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_HOME 54 linux,code = <KEY_HOMEPAGE>;
66 }; 55 };
67 }; 56 };
68 57
69 gpio-hall-sensor { 58 gpio-hall-sensor {
70 compatible = "gpio-keys"; 59 compatible = "gpio-keys";
71 60
72 pinctrl-names = "default"; 61 pinctrl-names = "default";
73 pinctrl-0 = <&gpio_hall_sensor 62 pinctrl-0 = <&gpio_hall_sensor_default>;
74 63
75 label = "GPIO Hall Effect Sens 64 label = "GPIO Hall Effect Sensor";
76 65
77 event-hall-sensor { 66 event-hall-sensor {
78 label = "Hall Effect S 67 label = "Hall Effect Sensor";
79 gpios = <&tlmm 52 GPIO 68 gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
80 linux,input-type = <EV 69 linux,input-type = <EV_SW>;
81 linux,code = <SW_LID>; 70 linux,code = <SW_LID>;
82 linux,can-disable; 71 linux,can-disable;
83 }; 72 };
84 }; 73 };
85 74
86 /* 75 /*
87 * NOTE: A5 connects GPIO 76 to a regl 76 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
88 * driver IC but A3 connects the same 77 * driver IC but A3 connects the same signal to an ENABLE pin of
89 * the driver. 78 * the driver.
90 */ 79 */
91 reg_motor_vdd: regulator-motor-vdd { 80 reg_motor_vdd: regulator-motor-vdd {
92 compatible = "regulator-fixed" 81 compatible = "regulator-fixed";
93 regulator-name = "motor_vdd"; 82 regulator-name = "motor_vdd";
94 regulator-min-microvolt = <300 83 regulator-min-microvolt = <3000000>;
95 regulator-max-microvolt = <300 84 regulator-max-microvolt = <3000000>;
96 85
97 gpio = <&tlmm 76 GPIO_ACTIVE_H 86 gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
98 enable-active-high; 87 enable-active-high;
99 88
100 pinctrl-names = "default"; 89 pinctrl-names = "default";
101 pinctrl-0 = <&motor_en_default 90 pinctrl-0 = <&motor_en_default>;
102 }; 91 };
103 92
104 reg_vdd_tsp_a: regulator-vdd-tsp-a { 93 reg_vdd_tsp_a: regulator-vdd-tsp-a {
105 compatible = "regulator-fixed" 94 compatible = "regulator-fixed";
106 regulator-name = "vdd_tsp_a"; 95 regulator-name = "vdd_tsp_a";
107 regulator-min-microvolt = <330 96 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <330 97 regulator-max-microvolt = <3300000>;
109 98
110 gpio = <&tlmm 73 GPIO_ACTIVE_H 99 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
111 enable-active-high; 100 enable-active-high;
112 101
113 pinctrl-names = "default"; 102 pinctrl-names = "default";
114 pinctrl-0 = <&tsp_en_default>; 103 pinctrl-0 = <&tsp_en_default>;
115 }; 104 };
116 105
117 i2c-muic { 106 i2c-muic {
118 compatible = "i2c-gpio"; 107 compatible = "i2c-gpio";
119 sda-gpios = <&tlmm 105 (GPIO_A 108 sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
120 scl-gpios = <&tlmm 106 (GPIO_A 109 scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
121 110
122 pinctrl-names = "default"; 111 pinctrl-names = "default";
123 pinctrl-0 = <&muic_i2c_default 112 pinctrl-0 = <&muic_i2c_default>;
124 113
125 #address-cells = <1>; 114 #address-cells = <1>;
126 #size-cells = <0>; 115 #size-cells = <0>;
127 116
128 muic: extcon@25 { 117 muic: extcon@25 {
129 compatible = "siliconm 118 compatible = "siliconmitus,sm5502-muic";
130 119
131 reg = <0x25>; 120 reg = <0x25>;
132 interrupt-parent = <&t 121 interrupt-parent = <&tlmm>;
133 interrupts = <12 IRQ_T 122 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
134 123
135 pinctrl-names = "defau 124 pinctrl-names = "default";
136 pinctrl-0 = <&muic_int 125 pinctrl-0 = <&muic_int_default>;
137 <<
138 usb_con: connector { <<
139 compatible = " <<
140 label = "micro <<
141 type = "micro" <<
142 }; <<
143 }; 126 };
144 }; 127 };
145 128
146 i2c-tkey { 129 i2c-tkey {
147 compatible = "i2c-gpio"; 130 compatible = "i2c-gpio";
148 sda-gpios = <&tlmm 16 (GPIO_AC 131 sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
149 scl-gpios = <&tlmm 17 (GPIO_AC 132 scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
150 133
151 pinctrl-names = "default"; 134 pinctrl-names = "default";
152 pinctrl-0 = <&tkey_i2c_default 135 pinctrl-0 = <&tkey_i2c_default>;
153 136
154 #address-cells = <1>; 137 #address-cells = <1>;
155 #size-cells = <0>; 138 #size-cells = <0>;
156 139
157 touchkey: touchkey@20 { 140 touchkey: touchkey@20 {
158 /* Note: Actually an A 141 /* Note: Actually an ABOV MCU that implements same interface */
159 compatible = "corerive 142 compatible = "coreriver,tc360-touchkey";
160 reg = <0x20>; 143 reg = <0x20>;
161 144
162 interrupt-parent = <&t 145 interrupt-parent = <&tlmm>;
163 interrupts = <98 IRQ_T 146 interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
164 147
165 /* vcc/vdd-supply are 148 /* vcc/vdd-supply are board-specific */
166 vddio-supply = <&pm891 149 vddio-supply = <&pm8916_l6>;
167 150
168 linux,keycodes = <KEY_ 151 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
169 152
170 pinctrl-names = "defau 153 pinctrl-names = "default";
171 pinctrl-0 = <&tkey_def 154 pinctrl-0 = <&tkey_default>;
172 }; 155 };
173 }; 156 };
174 157
175 i2c-nfc { 158 i2c-nfc {
176 compatible = "i2c-gpio"; 159 compatible = "i2c-gpio";
177 sda-gpios = <&tlmm 0 (GPIO_ACT 160 sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
178 scl-gpios = <&tlmm 1 (GPIO_ACT 161 scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
179 162
180 pinctrl-names = "default"; 163 pinctrl-names = "default";
181 pinctrl-0 = <&nfc_i2c_default> 164 pinctrl-0 = <&nfc_i2c_default>;
182 165
183 #address-cells = <1>; 166 #address-cells = <1>;
184 #size-cells = <0>; 167 #size-cells = <0>;
185 168
186 nfc@27 { 169 nfc@27 {
187 compatible = "samsung, 170 compatible = "samsung,s3fwrn5-i2c";
188 reg = <0x27>; 171 reg = <0x27>;
189 172
190 interrupt-parent = <&t 173 interrupt-parent = <&tlmm>;
191 interrupts = <21 IRQ_T 174 interrupts = <21 IRQ_TYPE_EDGE_RISING>;
192 175
193 en-gpios = <&tlmm 20 G 176 en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
194 wake-gpios = <&tlmm 49 177 wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
195 178
196 clocks = <&rpmcc RPM_S 179 clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
197 180
198 pinctrl-names = "defau 181 pinctrl-names = "default";
199 pinctrl-0 = <&nfc_defa 182 pinctrl-0 = <&nfc_default &nfc_clk_req>;
200 }; 183 };
201 }; 184 };
202 185
203 vibrator: vibrator { 186 vibrator: vibrator {
204 compatible = "pwm-vibrator"; 187 compatible = "pwm-vibrator";
205 188
206 pwms = <&clk_pwm 0 100000>; 189 pwms = <&clk_pwm 0 100000>;
207 pwm-names = "enable"; 190 pwm-names = "enable";
208 191
209 vcc-supply = <®_motor_vdd>; 192 vcc-supply = <®_motor_vdd>;
210 status = "disabled"; 193 status = "disabled";
211 }; 194 };
212 }; 195 };
213 196
214 &blsp_i2c1 { <<
215 status = "okay"; <<
216 <<
217 speaker_codec: audio-codec@34 { <<
218 compatible = "nxp,tfa9895"; <<
219 reg = <0x34>; <<
220 vddd-supply = <&pm8916_l5>; <<
221 sound-name-prefix = "Speaker"; <<
222 #sound-dai-cells = <0>; <<
223 }; <<
224 }; <<
225 <<
226 &blsp_i2c2 { 197 &blsp_i2c2 {
227 status = "okay"; 198 status = "okay";
228 199
229 accelerometer: accelerometer@10 { 200 accelerometer: accelerometer@10 {
230 compatible = "bosch,bmc150_acc 201 compatible = "bosch,bmc150_accel";
231 reg = <0x10>; 202 reg = <0x10>;
232 interrupt-parent = <&tlmm>; 203 interrupt-parent = <&tlmm>;
233 interrupts = <115 IRQ_TYPE_EDG 204 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
234 205
235 vdd-supply = <&pm8916_l17>; 206 vdd-supply = <&pm8916_l17>;
236 vddio-supply = <&pm8916_l5>; 207 vddio-supply = <&pm8916_l5>;
237 208
238 pinctrl-names = "default"; 209 pinctrl-names = "default";
239 pinctrl-0 = <&accel_int_defaul 210 pinctrl-0 = <&accel_int_default>;
240 }; 211 };
241 212
242 magnetometer@12 { 213 magnetometer@12 {
243 compatible = "bosch,bmc150_mag 214 compatible = "bosch,bmc150_magn";
244 reg = <0x12>; 215 reg = <0x12>;
245 216
246 vdd-supply = <&pm8916_l17>; 217 vdd-supply = <&pm8916_l17>;
247 vddio-supply = <&pm8916_l5>; 218 vddio-supply = <&pm8916_l5>;
248 }; 219 };
249 }; 220 };
250 221
251 &blsp_i2c4 { 222 &blsp_i2c4 {
252 status = "okay"; 223 status = "okay";
253 224
254 fuel-gauge@35 { !! 225 battery@35 {
255 compatible = "richtek,rt5033-b 226 compatible = "richtek,rt5033-battery";
256 reg = <0x35>; 227 reg = <0x35>;
257 interrupt-parent = <&tlmm>; 228 interrupt-parent = <&tlmm>;
258 interrupts = <121 IRQ_TYPE_EDG 229 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
259 230
260 pinctrl-names = "default"; 231 pinctrl-names = "default";
261 pinctrl-0 = <&fg_alert_default 232 pinctrl-0 = <&fg_alert_default>;
262 <<
263 power-supplies = <&charger>; <<
264 }; 233 };
265 }; 234 };
266 235
267 &blsp_i2c6 { !! 236 &blsp1_uart2 {
268 status = "okay"; <<
269 <<
270 pmic@34 { <<
271 compatible = "richtek,rt5033"; <<
272 reg = <0x34>; <<
273 <<
274 interrupts-extended = <&tlmm 6 <<
275 <<
276 pinctrl-0 = <&pmic_int_default <<
277 pinctrl-names = "default"; <<
278 <<
279 regulators { <<
280 rt5033_reg_safe_ldo: S <<
281 regulator-min- <<
282 regulator-max- <<
283 regulator-alwa <<
284 }; <<
285 <<
286 /* <<
287 * Needed for camera, <<
288 * Define empty nodes <<
289 * regulators. <<
290 */ <<
291 LDO {}; <<
292 BUCK {}; <<
293 }; <<
294 <<
295 charger: charger { <<
296 compatible = "richtek, <<
297 monitored-battery = <& <<
298 richtek,usb-connector <<
299 }; <<
300 }; <<
301 }; <<
302 <<
303 &blsp_uart2 { <<
304 status = "okay"; <<
305 }; <<
306 <<
307 &gpu { <<
308 status = "okay"; 237 status = "okay";
309 }; 238 };
310 239
311 /* !! 240 &dsi0 {
312 * For some reason the speaker amplifier is co <<
313 * (MI2S_2_D1) instead of the first (MI2S_2_D0 <<
314 * device tree, otherwise audio will seemingly <<
315 * but the speaker stays silent. <<
316 * <<
317 * When routing audio via QDSP6 (the default) <<
318 * the definitions from &q6afedai are used. Wh <<
319 * be alternatively routed directly to the LPA <<
320 * The definitions for &lpass are here for com <<
321 * setup with minor changes to the DT (either <<
322 */ <<
323 &lpass { <<
324 dai-link@3 { <<
325 reg = <MI2S_QUATERNARY>; <<
326 qcom,playback-sd-lines = <1>; <<
327 }; <<
328 }; <<
329 <<
330 &mdss { <<
331 status = "okay"; <<
332 }; <<
333 <<
334 &mdss_dsi0 { <<
335 pinctrl-names = "default", "sleep"; 241 pinctrl-names = "default", "sleep";
336 pinctrl-0 = <&mdss_default>; 242 pinctrl-0 = <&mdss_default>;
337 pinctrl-1 = <&mdss_sleep>; 243 pinctrl-1 = <&mdss_sleep>;
338 }; 244 };
339 245
340 &mpss_mem { !! 246 &mdss {
341 reg = <0x0 0x86800000 0x0 0x5400000>; !! 247 status = "okay";
342 }; 248 };
343 249
344 &pm8916_resin { 250 &pm8916_resin {
345 status = "okay"; 251 status = "okay";
346 linux,code = <KEY_VOLUMEDOWN>; 252 linux,code = <KEY_VOLUMEDOWN>;
347 }; 253 };
348 254
349 &pm8916_rpm_regulators { 255 &pm8916_rpm_regulators {
350 pm8916_l17: l17 { 256 pm8916_l17: l17 {
351 regulator-min-microvolt = <285 257 regulator-min-microvolt = <2850000>;
352 regulator-max-microvolt = <285 258 regulator-max-microvolt = <2850000>;
353 }; 259 };
354 }; 260 };
355 261
356 &q6afedai { <<
357 dai@22 { <<
358 reg = <QUATERNARY_MI2S_RX>; <<
359 qcom,sd-lines = <1>; <<
360 }; <<
361 }; <<
362 <<
363 &sdhc_1 { 262 &sdhc_1 {
364 status = "okay"; 263 status = "okay";
>> 264
>> 265 pinctrl-names = "default", "sleep";
>> 266 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
>> 267 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
365 }; 268 };
366 269
367 &sdhc_2 { 270 &sdhc_2 {
368 status = "okay"; 271 status = "okay";
369 272
370 pinctrl-names = "default", "sleep"; 273 pinctrl-names = "default", "sleep";
371 pinctrl-0 = <&sdc2_default &sdc2_cd_de !! 274 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
372 pinctrl-1 = <&sdc2_sleep &sdc2_cd_defa !! 275 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
373 276
374 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 277 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
375 }; 278 };
376 279
377 &sound { <<
378 model = "samsung-a2015"; <<
379 audio-routing = <<
380 "AMIC1", "MIC BIAS External1", <<
381 "AMIC2", "MIC BIAS Internal2", <<
382 "AMIC3", "MIC BIAS External1"; <<
383 <<
384 pinctrl-0 = <&cdc_pdm_default &sec_mi2 <<
385 pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_ <<
386 pinctrl-names = "default", "sleep"; <<
387 <<
388 sound_link_backend2: backend2-dai-link <<
389 link-name = "Quaternary MI2S"; <<
390 <<
391 cpu { <<
392 sound-dai = <&q6afedai <<
393 }; <<
394 platform { <<
395 sound-dai = <&q6routin <<
396 }; <<
397 codec { <<
398 sound-dai = <&speaker_ <<
399 }; <<
400 }; <<
401 }; <<
402 <<
403 &usb { 280 &usb {
404 status = "okay"; 281 status = "okay";
405 extcon = <&muic>, <&muic>; 282 extcon = <&muic>, <&muic>;
406 }; 283 };
407 284
408 &usb_hs_phy { 285 &usb_hs_phy {
409 extcon = <&muic>; 286 extcon = <&muic>;
410 }; 287 };
411 288
412 &venus { <<
413 status = "okay"; <<
414 }; <<
415 <<
416 &venus_mem { <<
417 status = "okay"; <<
418 }; <<
419 <<
420 &tlmm { 289 &tlmm {
421 accel_int_default: accel-int-default-s 290 accel_int_default: accel-int-default-state {
422 pins = "gpio115"; 291 pins = "gpio115";
423 function = "gpio"; 292 function = "gpio";
424 293
425 drive-strength = <2>; 294 drive-strength = <2>;
426 bias-disable; 295 bias-disable;
427 }; 296 };
428 297
429 fg_alert_default: fg-alert-default-sta 298 fg_alert_default: fg-alert-default-state {
430 pins = "gpio121"; 299 pins = "gpio121";
431 function = "gpio"; 300 function = "gpio";
432 301
433 drive-strength = <2>; 302 drive-strength = <2>;
434 bias-disable; 303 bias-disable;
435 }; 304 };
436 305
437 gpio_keys_default: gpio-keys-default-s 306 gpio_keys_default: gpio-keys-default-state {
438 pins = "gpio107", "gpio109"; 307 pins = "gpio107", "gpio109";
439 function = "gpio"; 308 function = "gpio";
440 309
441 drive-strength = <2>; 310 drive-strength = <2>;
442 bias-pull-up; 311 bias-pull-up;
443 }; 312 };
444 313
445 gpio_hall_sensor_default: gpio-hall-se 314 gpio_hall_sensor_default: gpio-hall-sensor-default-state {
446 pins = "gpio52"; 315 pins = "gpio52";
447 function = "gpio"; 316 function = "gpio";
448 317
449 drive-strength = <2>; 318 drive-strength = <2>;
450 bias-disable; 319 bias-disable;
451 }; 320 };
452 321
453 mdss_default: mdss-default-state { 322 mdss_default: mdss-default-state {
454 pins = "gpio25"; 323 pins = "gpio25";
455 function = "gpio"; 324 function = "gpio";
456 325
457 drive-strength = <8>; 326 drive-strength = <8>;
458 bias-disable; 327 bias-disable;
459 }; 328 };
460 mdss_sleep: mdss-sleep-state { 329 mdss_sleep: mdss-sleep-state {
461 pins = "gpio25"; 330 pins = "gpio25";
462 function = "gpio"; 331 function = "gpio";
463 332
464 drive-strength = <2>; 333 drive-strength = <2>;
465 bias-pull-down; 334 bias-pull-down;
466 }; 335 };
467 336
468 motor_en_default: motor-en-default-sta 337 motor_en_default: motor-en-default-state {
469 pins = "gpio76"; 338 pins = "gpio76";
470 function = "gpio"; 339 function = "gpio";
471 340
472 drive-strength = <2>; 341 drive-strength = <2>;
473 bias-disable; 342 bias-disable;
474 }; 343 };
475 344
476 motor_pwm_default: motor-pwm-default-s 345 motor_pwm_default: motor-pwm-default-state {
477 pins = "gpio50"; 346 pins = "gpio50";
478 function = "gcc_gp2_clk_a"; 347 function = "gcc_gp2_clk_a";
479 }; 348 };
480 349
481 muic_i2c_default: muic-i2c-default-sta 350 muic_i2c_default: muic-i2c-default-state {
482 pins = "gpio105", "gpio106"; 351 pins = "gpio105", "gpio106";
483 function = "gpio"; 352 function = "gpio";
484 353
485 drive-strength = <2>; 354 drive-strength = <2>;
486 bias-disable; 355 bias-disable;
487 }; 356 };
488 357
489 muic_int_default: muic-int-default-sta 358 muic_int_default: muic-int-default-state {
490 pins = "gpio12"; 359 pins = "gpio12";
491 function = "gpio"; 360 function = "gpio";
492 361
493 drive-strength = <2>; 362 drive-strength = <2>;
494 bias-disable; 363 bias-disable;
495 }; 364 };
496 365
497 nfc_default: nfc-default-state { 366 nfc_default: nfc-default-state {
498 nfc-pins { 367 nfc-pins {
499 pins = "gpio20", "gpio 368 pins = "gpio20", "gpio49";
500 function = "gpio"; 369 function = "gpio";
501 370
502 drive-strength = <2>; 371 drive-strength = <2>;
503 bias-disable; 372 bias-disable;
504 }; 373 };
505 374
506 irq-pins { 375 irq-pins {
507 pins = "gpio21"; 376 pins = "gpio21";
508 function = "gpio"; 377 function = "gpio";
509 378
510 drive-strength = <2>; 379 drive-strength = <2>;
511 bias-pull-down; 380 bias-pull-down;
512 }; 381 };
513 }; 382 };
514 383
515 nfc_i2c_default: nfc-i2c-default-state 384 nfc_i2c_default: nfc-i2c-default-state {
516 pins = "gpio0", "gpio1"; 385 pins = "gpio0", "gpio1";
517 function = "gpio"; 386 function = "gpio";
518 387
519 drive-strength = <2>; <<
520 bias-disable; <<
521 }; <<
522 <<
523 pmic_int_default: pmic-int-default-sta <<
524 pins = "gpio62"; <<
525 function = "gpio"; <<
526 drive-strength = <2>; <<
527 bias-disable; <<
528 }; <<
529 <<
530 sdc2_cd_default: sdc2-cd-default-state <<
531 pins = "gpio38"; <<
532 function = "gpio"; <<
533 drive-strength = <2>; 388 drive-strength = <2>;
534 bias-disable; 389 bias-disable;
535 }; 390 };
536 391
537 tkey_default: tkey-default-state { 392 tkey_default: tkey-default-state {
538 pins = "gpio98"; 393 pins = "gpio98";
539 function = "gpio"; 394 function = "gpio";
540 395
541 drive-strength = <2>; 396 drive-strength = <2>;
542 bias-disable; 397 bias-disable;
543 }; 398 };
544 399
545 tkey_i2c_default: tkey-i2c-default-sta 400 tkey_i2c_default: tkey-i2c-default-state {
546 pins = "gpio16", "gpio17"; 401 pins = "gpio16", "gpio17";
547 function = "gpio"; 402 function = "gpio";
548 403
549 drive-strength = <2>; 404 drive-strength = <2>;
550 bias-disable; 405 bias-disable;
551 }; 406 };
552 407
553 tsp_en_default: tsp-en-default-state { 408 tsp_en_default: tsp-en-default-state {
554 pins = "gpio73"; 409 pins = "gpio73";
555 function = "gpio"; 410 function = "gpio";
556 411
557 drive-strength = <2>; 412 drive-strength = <2>;
558 bias-disable; 413 bias-disable;
559 }; 414 };
560 415
561 ts_int_default: ts-int-default-state { 416 ts_int_default: ts-int-default-state {
562 pins = "gpio13"; 417 pins = "gpio13";
563 function = "gpio"; 418 function = "gpio";
564 419
565 drive-strength = <2>; 420 drive-strength = <2>;
566 bias-disable; 421 bias-disable;
567 }; 422 };
568 }; 423 };
569 424
570 &pm8916_gpios { 425 &pm8916_gpios {
571 nfc_clk_req: nfc-clk-req-state { 426 nfc_clk_req: nfc-clk-req-state {
572 pins = "gpio2"; 427 pins = "gpio2";
573 function = "func1"; 428 function = "func1";
574 429
575 input-enable; 430 input-enable;
576 bias-disable; 431 bias-disable;
577 power-source = <PM8916_GPIO_L2 432 power-source = <PM8916_GPIO_L2>;
578 }; 433 };
579 }; 434 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.